Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:

 - the core has now a lockless variant of i2c_smbus_xfer. Some open
   coded versions of this got removed in drivers. This also enables
   proper SCCB support in regmap.

 - locking got a more precise naming. i2c_{un}lock_adapter() had to go,
   and we know use i2c_lock_bus() consistently with flags like
   I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.

 - the gpio fault injector got a new delicate testcase

 - the bus recovery procedure got fixed to handle the new testcase
   correctly

 - a new quirk flag for controllers not able to handle zero length
   messages together with driver updates to use it

 - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
   family S900

 - and a good set of driver improvements and bugfixes

* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: rcar: implement STOP and REP_START according to docs
  i2c: rcar: refactor private flags
  i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
  i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
  dt-bindings: i2c: rcar: Add r8a774a1 support
  dt-bindings: i2c: sh_mobile: Add r8a774a1 support
  i2c: imx: Simplify stopped state tracking
  i2c: imx: Fix race condition in dma read
  i2c: pasemi: remove hardcoded bus numbers on smbus
  i2c: designware: Add SPDX license tag
  i2c: designware: Convert to use struct i2c_timings
  i2c: core: Parse SDA hold time from firmware
  i2c: designware-pcidrv: Mark expected switch fall-through
  i2c: amd8111: Mark expected switch fall-through
  i2c: sh_mobile: use core to detect 'no zero length read' quirk
  i2c: xlr: use core to detect 'no zero length' quirk
  i2c: rcar: use core to detect 'no zero length' quirk
  i2c: stu300: use core to detect 'no zero length' quirk
  i2c: pmcmsp: use core to detect 'no zero length' quirk
  i2c: mxs: use core to detect 'no zero length' quirk
  ...

1 files changed, 11 insertions, 51 deletions

diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
index 8ce2cd368477..e7f9305b2dd9 100644
--- a/drivers/i2c/busses/i2c-designware-slave.c
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -1,23 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Synopsys DesignWare I2C adapter driver (slave only).
  *
  * Based on the Synopsys DesignWare I2C adapter driver (master).
  *
  * Copyright (C) 2016 Synopsys Inc.
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- * ----------------------------------------------------------------------------
- *
  */
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -51,53 +38,18 @@ static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
  */
 static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
 {
-	u32 reg, comp_param1;
 	int ret;
 
 	ret = i2c_dw_acquire_lock(dev);
 	if (ret)
 		return ret;
 
-	reg = dw_readl(dev, DW_IC_COMP_TYPE);
-	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
-		/* Configure register endianness access. */
-		dev->flags |= ACCESS_SWAP;
-	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
-		/* Configure register access mode 16bit. */
-		dev->flags |= ACCESS_16BIT;
-	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
-		dev_err(dev->dev,
-			"Unknown Synopsys component type: 0x%08x\n", reg);
-		i2c_dw_release_lock(dev);
-		return -ENODEV;
-	}
-
-	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
-
 	/* Disable the adapter. */
 	__i2c_dw_disable(dev);
 
-	/* Configure SDA Hold Time if required. */
-	reg = dw_readl(dev, DW_IC_COMP_VERSION);
-	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
-		if (!dev->sda_hold_time) {
-			/* Keep previous hold time setting if no one set it. */
-			dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
-		}
-		/*
-		 * Workaround for avoiding TX arbitration lost in case I2C
-		 * slave pulls SDA down "too quickly" after falling egde of
-		 * SCL by enabling non-zero SDA RX hold. Specification says it
-		 * extends incoming SDA low to high transition while SCL is
-		 * high but it apprears to help also above issue.
-		 */
-		if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
-			dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+	/* Write SDA hold time if supported */
+	if (dev->sda_hold_time)
 		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
-	} else {
-		dev_warn(dev->dev,
-			 "Hardware too old to adjust SDA hold time.\n");
-	}
 
 	i2c_dw_configure_fifo_slave(dev);
 	i2c_dw_release_lock(dev);
@@ -299,6 +251,14 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
 	dev->disable = i2c_dw_disable;
 	dev->disable_int = i2c_dw_disable_int;
 
+	ret = i2c_dw_set_reg_access(dev);
+	if (ret)
+		return ret;
+
+	ret = i2c_dw_set_sda_hold(dev);
+	if (ret)
+		return ret;
+
 	ret = dev->init(dev);
 	if (ret)
 		return ret;