Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 431 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
new file mode 100644
index 000000000000..eca5ed3738b8
--- /dev/null
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -0,0 +1,431 @@
+/*
+    amd756.c - Part of lm_sensors, Linux kernel modules for hardware
+              monitoring
+
+    Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org>
+
+    Shamelessly ripped from i2c-piix4.c:
+
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> and
+    Philip Edelbrock <phil@netroedge.com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+    2002-04-08: Added nForce support. (Csaba Halasz)
+    2002-10-03: Fixed nForce PnP I/O port. (Michael Steil)
+    2002-12-28: Rewritten into something that resembles a Linux driver (hch)
+    2003-11-29: Added back AMD8111 removed by the previous rewrite.
+                (Philip Pokorny)
+*/
+
+/*
+   Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce
+   Note: we assume there can only be one device, with one SMBus interface.
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <asm/io.h>
+
+/* AMD756 SMBus address offsets */
+#define SMB_ADDR_OFFSET		0xE0
+#define SMB_IOSIZE		16
+#define SMB_GLOBAL_STATUS	(0x0 + amd756_ioport)
+#define SMB_GLOBAL_ENABLE	(0x2 + amd756_ioport)
+#define SMB_HOST_ADDRESS	(0x4 + amd756_ioport)
+#define SMB_HOST_DATA		(0x6 + amd756_ioport)
+#define SMB_HOST_COMMAND	(0x8 + amd756_ioport)
+#define SMB_HOST_BLOCK_DATA	(0x9 + amd756_ioport)
+#define SMB_HAS_DATA		(0xA + amd756_ioport)
+#define SMB_HAS_DEVICE_ADDRESS	(0xC + amd756_ioport)
+#define SMB_HAS_HOST_ADDRESS	(0xE + amd756_ioport)
+#define SMB_SNOOP_ADDRESS	(0xF + amd756_ioport)
+
+/* PCI Address Constants */
+
+/* address of I/O space */
+#define SMBBA		0x058		/* mh */
+#define SMBBANFORCE	0x014
+
+/* general configuration */
+#define SMBGCFG		0x041		/* mh */
+
+/* silicon revision code */
+#define SMBREV		0x008
+
+/* Other settings */
+#define MAX_TIMEOUT	500
+
+/* AMD756 constants */
+#define AMD756_QUICK		0x00
+#define AMD756_BYTE		0x01
+#define AMD756_BYTE_DATA	0x02
+#define AMD756_WORD_DATA	0x03
+#define AMD756_PROCESS_CALL	0x04
+#define AMD756_BLOCK_DATA	0x05
+
+
+static unsigned short amd756_ioport = 0;
+
+/* 
+  SMBUS event = I/O 28-29 bit 11
+     see E0 for the status bits and enabled in E2
+     
+*/
+#define GS_ABRT_STS	(1 << 0)
+#define GS_COL_STS	(1 << 1)
+#define GS_PRERR_STS	(1 << 2)
+#define GS_HST_STS	(1 << 3)
+#define GS_HCYC_STS	(1 << 4)
+#define GS_TO_STS	(1 << 5)
+#define GS_SMB_STS	(1 << 11)
+
+#define GS_CLEAR_STS	(GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \
+			 GS_HCYC_STS | GS_TO_STS )
+
+#define GE_CYC_TYPE_MASK	(7)
+#define GE_HOST_STC		(1 << 3)
+#define GE_ABORT		(1 << 5)
+
+
+static int amd756_transaction(struct i2c_adapter *adap)
+{
+	int temp;
+	int result = 0;
+	int timeout = 0;
+
+	dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, "
+		"DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS),
+		inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS),
+		inb_p(SMB_HOST_DATA));
+
+	/* Make sure the SMBus host is ready to start transmitting */
+	if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) {
+		dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp);
+		do {
+			msleep(1);
+			temp = inw_p(SMB_GLOBAL_STATUS);
+		} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
+		         (timeout++ < MAX_TIMEOUT));
+		/* If the SMBus is still busy, we give up */
+		if (timeout >= MAX_TIMEOUT) {
+			dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
+			goto abort;
+		}
+		timeout = 0;
+	}
+
+	/* start the transaction by setting the start bit */
+	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE);
+
+	/* We will always wait for a fraction of a second! */
+	do {
+		msleep(1);
+		temp = inw_p(SMB_GLOBAL_STATUS);
+	} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
+
+	/* If the SMBus is still busy, we give up */
+	if (timeout >= MAX_TIMEOUT) {
+		dev_dbg(&adap->dev, "Completion timeout!\n");
+		goto abort;
+	}
+
+	if (temp & GS_PRERR_STS) {
+		result = -1;
+		dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n");
+	}
+
+	if (temp & GS_COL_STS) {
+		result = -1;
+		dev_warn(&adap->dev, "SMBus collision!\n");
+	}
+
+	if (temp & GS_TO_STS) {
+		result = -1;
+		dev_dbg(&adap->dev, "SMBus protocol timeout!\n");
+	}
+
+	if (temp & GS_HCYC_STS)
+		dev_dbg(&adap->dev, "SMBus protocol success!\n");
+
+	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
+
+#ifdef DEBUG
+	if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) {
+		dev_dbg(&adap->dev,
+			"Failed reset at end of transaction (%04x)\n", temp);
+	}
+#endif
+
+	dev_dbg(&adap->dev,
+		"Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n",
+		inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE),
+		inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA));
+
+	return result;
+
+ abort:
+	dev_warn(&adap->dev, "Sending abort\n");
+	outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE);
+	msleep(100);
+	outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS);
+	return -1;
+}
+
+/* Return -1 on error. */
+static s32 amd756_access(struct i2c_adapter * adap, u16 addr,
+		  unsigned short flags, char read_write,
+		  u8 command, int size, union i2c_smbus_data * data)
+{
+	int i, len;
+
+	/** TODO: Should I supporte the 10-bit transfers? */
+	switch (size) {
+	case I2C_SMBUS_PROC_CALL:
+		dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+		/* TODO: Well... It is supported, I'm just not sure what to do here... */
+		return -1;
+	case I2C_SMBUS_QUICK:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		size = AMD756_QUICK;
+		break;
+	case I2C_SMBUS_BYTE:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		if (read_write == I2C_SMBUS_WRITE)
+			outb_p(command, SMB_HOST_DATA);
+		size = AMD756_BYTE;
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE)
+			outw_p(data->byte, SMB_HOST_DATA);
+		size = AMD756_BYTE_DATA;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE)
+			outw_p(data->word, SMB_HOST_DATA);	/* TODO: endian???? */
+		size = AMD756_WORD_DATA;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		outw_p(((addr & 0x7f) << 1) | (read_write & 0x01),
+		       SMB_HOST_ADDRESS);
+		outb_p(command, SMB_HOST_COMMAND);
+		if (read_write == I2C_SMBUS_WRITE) {
+			len = data->block[0];
+			if (len < 0)
+				len = 0;
+			if (len > 32)
+				len = 32;
+			outw_p(len, SMB_HOST_DATA);
+			/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
+			for (i = 1; i <= len; i++)
+				outb_p(data->block[i],
+				       SMB_HOST_BLOCK_DATA);
+		}
+		size = AMD756_BLOCK_DATA;
+		break;
+	}
+
+	/* How about enabling interrupts... */
+	outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE);
+
+	if (amd756_transaction(adap))	/* Error in transaction */
+		return -1;
+
+	if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK))
+		return 0;
+
+
+	switch (size) {
+	case AMD756_BYTE:
+		data->byte = inw_p(SMB_HOST_DATA);
+		break;
+	case AMD756_BYTE_DATA:
+		data->byte = inw_p(SMB_HOST_DATA);
+		break;
+	case AMD756_WORD_DATA:
+		data->word = inw_p(SMB_HOST_DATA);	/* TODO: endian???? */
+		break;
+	case AMD756_BLOCK_DATA:
+		data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f;
+		if(data->block[0] > 32)
+			data->block[0] = 32;
+		/* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */
+		for (i = 1; i <= data->block[0]; i++)
+			data->block[i] = inb_p(SMB_HOST_BLOCK_DATA);
+		break;
+	}
+
+	return 0;
+}
+
+static u32 amd756_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+	    I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+	    I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+static struct i2c_algorithm smbus_algorithm = {
+	.name		= "Non-I2C SMBus adapter",
+	.id		= I2C_ALGO_SMBUS,
+	.smbus_xfer	= amd756_access,
+	.functionality	= amd756_func,
+};
+
+struct i2c_adapter amd756_smbus = {
+	.owner		= THIS_MODULE,
+	.class          = I2C_CLASS_HWMON,
+	.algo		= &smbus_algorithm,
+	.name		= "unset",
+};
+
+enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 };
+static const char* chipname[] = {
+	"AMD756", "AMD766", "AMD768",
+	"nVidia nForce", "AMD8111",
+};
+
+static struct pci_device_id amd756_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B),
+	  .driver_data = AMD756 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413),
+	  .driver_data = AMD766 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443),
+	  .driver_data = AMD768 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS),
+	  .driver_data = AMD8111 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS),
+	  .driver_data = NFORCE },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE (pci, amd756_ids);
+
+static int __devinit amd756_probe(struct pci_dev *pdev,
+				  const struct pci_device_id *id)
+{
+	int nforce = (id->driver_data == NFORCE);
+	int error;
+	u8 temp;
+	
+	if (amd756_ioport) {
+		dev_err(&pdev->dev, "Only one device supported "
+		       "(you have a strange motherboard, btw)\n");
+		return -ENODEV;
+	}
+
+	if (nforce) {
+		if (PCI_FUNC(pdev->devfn) != 1)
+			return -ENODEV;
+
+		pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport);
+		amd756_ioport &= 0xfffc;
+	} else { /* amd */
+		if (PCI_FUNC(pdev->devfn) != 3)
+			return -ENODEV;
+
+		pci_read_config_byte(pdev, SMBGCFG, &temp);
+		if ((temp & 128) == 0) {
+			dev_err(&pdev->dev,
+				"Error: SMBus controller I/O not enabled!\n");
+			return -ENODEV;
+		}
+
+		/* Determine the address of the SMBus areas */
+		/* Technically it is a dword but... */
+		pci_read_config_word(pdev, SMBBA, &amd756_ioport);
+		amd756_ioport &= 0xff00;
+		amd756_ioport += SMB_ADDR_OFFSET;
+	}
+
+	if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) {
+		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
+			amd756_ioport);
+		return -ENODEV;
+	}
+
+	pci_read_config_byte(pdev, SMBREV, &temp);
+	dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp);
+	dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport);
+
+	/* set up the driverfs linkage to our parent device */
+	amd756_smbus.dev.parent = &pdev->dev;
+
+	sprintf(amd756_smbus.name, "SMBus %s adapter at %04x",
+		chipname[id->driver_data], amd756_ioport);
+
+	error = i2c_add_adapter(&amd756_smbus);
+	if (error) {
+		dev_err(&pdev->dev,
+			"Adapter registration failed, module not inserted\n");
+		goto out_err;
+	}
+
+	return 0;
+
+ out_err:
+	release_region(amd756_ioport, SMB_IOSIZE);
+	return error;
+}
+
+static void __devexit amd756_remove(struct pci_dev *dev)
+{
+	i2c_del_adapter(&amd756_smbus);
+	release_region(amd756_ioport, SMB_IOSIZE);
+}
+
+static struct pci_driver amd756_driver = {
+	.name		= "amd756_smbus",
+	.id_table	= amd756_ids,
+	.probe		= amd756_probe,
+	.remove		= __devexit_p(amd756_remove),
+};
+
+static int __init amd756_init(void)
+{
+	return pci_register_driver(&amd756_driver);
+}
+
+static void __exit amd756_exit(void)
+{
+	pci_unregister_driver(&amd756_driver);
+}
+
+MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>");
+MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver");
+MODULE_LICENSE("GPL");
+
+EXPORT_SYMBOL(amd756_smbus);
+
+module_init(amd756_init)
+module_exit(amd756_exit)