summaryrefslogtreecommitdiff
path: root/drivers/hwmon/abituguru.c
diff options
context:
space:
mode:
authorHans de Goede <j.w.r.degoede@hhs.nl>2007-06-19 00:59:34 +0400
committerMark M. Hoffman <mhoffman@lightlink.com>2007-07-19 22:22:15 +0400
commite432dc811bfb6b3d3ad618d99bd8d58132fec316 (patch)
tree31b0adef55a1cd1f7cd00457eacdb69711c2ca69 /drivers/hwmon/abituguru.c
parent2dbbdb35746fdc1a3c3bc5b07f197a90e53b059e (diff)
downloadlinux-e432dc811bfb6b3d3ad618d99bd8d58132fec316.tar.xz
hwmon: fix detection of abituguru volt inputs
This patch fixes the detection of volt inputs with a reading of more then 240 units. Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Diffstat (limited to 'drivers/hwmon/abituguru.c')
-rw-r--r--drivers/hwmon/abituguru.c26
1 files changed, 18 insertions, 8 deletions
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 11a40da13535..0770688f79b6 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -418,7 +418,7 @@ static int __devinit
abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
u8 sensor_addr)
{
- u8 val, buf[3];
+ u8 val, test_flag, buf[3];
int i, ret = -ENODEV; /* error is the most common used retval :| */
/* If overriden by the user return the user selected type */
@@ -436,7 +436,7 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
return -ENODEV;
/* Test val is sane / usable for sensor type detection. */
- if ((val < 10u) || (val > 240u)) {
+ if ((val < 10u) || (val > 250u)) {
printk(KERN_WARNING ABIT_UGURU_NAME
": bank1-sensor: %d reading (%d) too close to limits, "
"unable to determine sensor type, skipping sensor\n",
@@ -449,10 +449,20 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
ABIT_UGURU_DEBUG(2, "testing bank1 sensor %d\n", (int)sensor_addr);
/* Volt sensor test, enable volt low alarm, set min value ridicously
- high. If its a volt sensor this should always give us an alarm. */
- buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
- buf[1] = 245;
- buf[2] = 250;
+ high, or vica versa if the reading is very high. If its a volt
+ sensor this should always give us an alarm. */
+ if (val <= 240u) {
+ buf[0] = ABIT_UGURU_VOLT_LOW_ALARM_ENABLE;
+ buf[1] = 245;
+ buf[2] = 250;
+ test_flag = ABIT_UGURU_VOLT_LOW_ALARM_FLAG;
+ } else {
+ buf[0] = ABIT_UGURU_VOLT_HIGH_ALARM_ENABLE;
+ buf[1] = 5;
+ buf[2] = 10;
+ test_flag = ABIT_UGURU_VOLT_HIGH_ALARM_FLAG;
+ }
+
if (abituguru_write(data, ABIT_UGURU_SENSOR_BANK1 + 2, sensor_addr,
buf, 3) != 3)
goto abituguru_detect_bank1_sensor_type_exit;
@@ -469,13 +479,13 @@ abituguru_detect_bank1_sensor_type(struct abituguru_data *data,
sensor_addr, buf, 3,
ABIT_UGURU_MAX_RETRIES) != 3)
goto abituguru_detect_bank1_sensor_type_exit;
- if (buf[0] & ABIT_UGURU_VOLT_LOW_ALARM_FLAG) {
+ if (buf[0] & test_flag) {
ABIT_UGURU_DEBUG(2, " found volt sensor\n");
ret = ABIT_UGURU_IN_SENSOR;
goto abituguru_detect_bank1_sensor_type_exit;
} else
ABIT_UGURU_DEBUG(2, " alarm raised during volt "
- "sensor test, but volt low flag not set\n");
+ "sensor test, but volt range flag not set\n");
} else
ABIT_UGURU_DEBUG(2, " alarm not raised during volt sensor "
"test\n");