hwmon: Add ST-Ericsson ABX500 hwmon driver

Each of ST-Ericsson X500 chip set series consists of both ABX500 and DBX500
chips. This is ABX500 hwmon driver, where the abx500.c is a common layer for
all ABX500s, and the ab8500.c is specific for AB8500 chip. Under this designed
structure, other chip specific files can be added simply using the same common
layer abx500.c.

Signed-off-by: Hongbo Zhang <hongbo.zhang@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>

1 files changed, 206 insertions, 0 deletions

diff --git a/drivers/hwmon/ab8500.c b/drivers/hwmon/ab8500.c
new file mode 100644
index 000000000000..d844dc806853
--- /dev/null
+++ b/drivers/hwmon/ab8500.c
@@ -0,0 +1,206 @@
+/*
+ * Copyright (C) ST-Ericsson 2010 - 2013
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ *         Hongbo Zhang <hongbo.zhang@linaro.org>
+ * License Terms: GNU General Public License v2
+ *
+ * When the AB8500 thermal warning temperature is reached (threshold cannot
+ * be changed by SW), an interrupt is set, and if no further action is taken
+ * within a certain time frame, pm_power off will be called.
+ *
+ * When AB8500 thermal shutdown temperature is reached a hardware shutdown of
+ * the AB8500 will occur.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power/ab8500.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include "abx500.h"
+
+#define DEFAULT_POWER_OFF_DELAY	(HZ * 10)
+#define THERMAL_VCC		1800
+#define PULL_UP_RESISTOR	47000
+/* Number of monitored sensors should not greater than NUM_SENSORS */
+#define NUM_MONITORED_SENSORS	4
+
+struct ab8500_gpadc_cfg {
+	const struct abx500_res_to_temp *temp_tbl;
+	int tbl_sz;
+	int vcc;
+	int r_up;
+};
+
+struct ab8500_temp {
+	struct ab8500_gpadc *gpadc;
+	struct ab8500_btemp *btemp;
+	struct delayed_work power_off_work;
+	struct ab8500_gpadc_cfg cfg;
+	struct abx500_temp *abx500_data;
+};
+
+/*
+ * The hardware connection is like this:
+ * VCC----[ R_up ]-----[ NTC ]----GND
+ * where R_up is pull-up resistance, and GPADC measures voltage on NTC.
+ * and res_to_temp table is strictly sorted by falling resistance values.
+ */
+static int ab8500_voltage_to_temp(struct ab8500_gpadc_cfg *cfg,
+		int v_ntc, int *temp)
+{
+	int r_ntc, i = 0, tbl_sz = cfg->tbl_sz;
+	const struct abx500_res_to_temp *tbl = cfg->temp_tbl;
+
+	if (cfg->vcc < 0 || v_ntc >= cfg->vcc)
+		return -EINVAL;
+
+	r_ntc = v_ntc * cfg->r_up / (cfg->vcc - v_ntc);
+	if (r_ntc > tbl[0].resist || r_ntc < tbl[tbl_sz - 1].resist)
+		return -EINVAL;
+
+	while (!(r_ntc <= tbl[i].resist && r_ntc > tbl[i + 1].resist) &&
+			i < tbl_sz - 2)
+		i++;
+
+	/* return milli-Celsius */
+	*temp = tbl[i].temp * 1000 + ((tbl[i + 1].temp - tbl[i].temp) * 1000 *
+		(r_ntc - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
+
+	return 0;
+}
+
+static int ab8500_read_sensor(struct abx500_temp *data, u8 sensor, int *temp)
+{
+	int voltage, ret;
+	struct ab8500_temp *ab8500_data = data->plat_data;
+
+	if (sensor == BAT_CTRL) {
+		*temp = ab8500_btemp_get_batctrl_temp(ab8500_data->btemp);
+	} else if (sensor == BTEMP_BALL) {
+		*temp = ab8500_btemp_get_temp(ab8500_data->btemp);
+	} else {
+		voltage = ab8500_gpadc_convert(ab8500_data->gpadc, sensor);
+		if (voltage < 0)
+			return voltage;
+
+		ret = ab8500_voltage_to_temp(&ab8500_data->cfg, voltage, temp);
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+static void ab8500_thermal_power_off(struct work_struct *work)
+{
+	struct ab8500_temp *ab8500_data = container_of(work,
+				struct ab8500_temp, power_off_work.work);
+	struct abx500_temp *abx500_data = ab8500_data->abx500_data;
+
+	dev_warn(&abx500_data->pdev->dev, "Power off due to critical temp\n");
+
+	pm_power_off();
+}
+
+static ssize_t ab8500_show_name(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	return sprintf(buf, "ab8500\n");
+}
+
+static ssize_t ab8500_show_label(struct device *dev,
+		struct device_attribute *devattr, char *buf)
+{
+	char *label;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	int index = attr->index;
+
+	switch (index) {
+	case 1:
+		label = "ext_adc1";
+		break;
+	case 2:
+		label = "ext_adc2";
+		break;
+	case 3:
+		label = "bat_temp";
+		break;
+	case 4:
+		label = "bat_ctrl";
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return sprintf(buf, "%s\n", label);
+}
+
+static int ab8500_temp_irq_handler(int irq, struct abx500_temp *data)
+{
+	struct ab8500_temp *ab8500_data = data->plat_data;
+
+	dev_warn(&data->pdev->dev, "Power off in %d s\n",
+		 DEFAULT_POWER_OFF_DELAY / HZ);
+
+	schedule_delayed_work(&ab8500_data->power_off_work,
+		DEFAULT_POWER_OFF_DELAY);
+	return 0;
+}
+
+int abx500_hwmon_init(struct abx500_temp *data)
+{
+	struct ab8500_temp *ab8500_data;
+
+	ab8500_data = devm_kzalloc(&data->pdev->dev, sizeof(*ab8500_data),
+		GFP_KERNEL);
+	if (!ab8500_data)
+		return -ENOMEM;
+
+	ab8500_data->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+	if (IS_ERR(ab8500_data->gpadc))
+		return PTR_ERR(ab8500_data->gpadc);
+
+	ab8500_data->btemp = ab8500_btemp_get();
+	if (IS_ERR(ab8500_data->btemp))
+		return PTR_ERR(ab8500_data->btemp);
+
+	INIT_DELAYED_WORK(&ab8500_data->power_off_work,
+			  ab8500_thermal_power_off);
+
+	ab8500_data->cfg.vcc = THERMAL_VCC;
+	ab8500_data->cfg.r_up = PULL_UP_RESISTOR;
+	ab8500_data->cfg.temp_tbl = ab8500_temp_tbl_a_thermistor;
+	ab8500_data->cfg.tbl_sz = ab8500_temp_tbl_a_size;
+
+	data->plat_data = ab8500_data;
+
+	/*
+	 * ADC_AUX1 and ADC_AUX2, connected to external NTC
+	 * BTEMP_BALL and BAT_CTRL, fixed usage
+	 */
+	data->gpadc_addr[0] = ADC_AUX1;
+	data->gpadc_addr[1] = ADC_AUX2;
+	data->gpadc_addr[2] = BTEMP_BALL;
+	data->gpadc_addr[3] = BAT_CTRL;
+	data->monitored_sensors = NUM_MONITORED_SENSORS;
+
+	data->ops.read_sensor = ab8500_read_sensor;
+	data->ops.irq_handler = ab8500_temp_irq_handler;
+	data->ops.show_name = ab8500_show_name;
+	data->ops.show_label = ab8500_show_label;
+	data->ops.is_visible = NULL;
+
+	return 0;
+}
+EXPORT_SYMBOL(abx500_hwmon_init);
+
+MODULE_AUTHOR("Hongbo Zhang <hongbo.zhang@linaro.org>");
+MODULE_DESCRIPTION("AB8500 temperature driver");
+MODULE_LICENSE("GPL");