diff options
| author | Magnus Damm <damm@opensource.se> | 2013-03-13 15:32:13 +0400 |
|---|---|---|
| committer | Simon Horman <horms+renesas@verge.net.au> | 2013-04-03 05:30:24 +0400 |
| commit | 119f5e448d32c11faf22fe81f6f2d78467a47149 (patch) | |
| tree | 5f300b87c8cb92f6db9de3298637d4afaab2e7e8 /drivers/gpio/Kconfig | |
| parent | 87bd63bfcf177daa272432482c17195f3c0ebb21 (diff) | |
| download | linux-119f5e448d32c11faf22fe81f6f2d78467a47149.tar.xz | |
gpio: Renesas R-Car GPIO driver V3
This patch is V3 of a GPIO driver for the R-Car series of
SoCs from Renesas. This driver is designed to be reusable
between multiple SoCs that share the same basic building block,
but so far it has only been used on R-Car H1 (r8a7779).
Each driver instance handles 32 GPIOs with individually
maskable IRQs. The driver operates on a single I/O memory
range and the 32 GPIOs are hooked up a single interrupt.
In the case of R-Car H1 either external IRQ pins or GPIOs
with interrupts can be used for on-board interupts. For
external IRQs 4 pins are supported, and in the case of GPIO
there are 202 GPIOS as 202 interrupts hooked up via 6 driver
instances and to the GIC and the Cortex-A9 Quad.
At this point this driver is interfacing as a regular
platform device driver. In the future DT support will be
submitted as an incremental feature patch.
Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 93aaadf99f28..d766e3cbef18 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -204,6 +204,12 @@ config GPIO_PXA help Say yes here to support the PXA GPIO device +config GPIO_RCAR + tristate "Renesas R-Car GPIO" + depends on ARM + help + Say yes here to support GPIO on Renesas R-Car SoCs. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR |