Merge tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "This development cycle resulted in a fair amount of changes in both
  core and driver sides. The most significant change in ALSA core is
  about PCM. Also the support of of-graph card and the new DAPM widget
  for DSP are noteworthy changes in ASoC core. And there're lots of
  small changes splat over the tree, as you can see in diffstat.

  Below are a few highlights:

  ALSA core:
   - Removal of set_fs() hackery from PCM core stuff, and the code
     reorganization / optimization thereafter
   - Improved support of PCM ack ops, and a new ABI for improved
     control/status mmap handling
   - Lots of constifications in various codes

  ASoC core:
   - The support of of-graph card, which may work as a better generic
     device for a replacement of simple-card
   - New widget types intended mainly for use with DSPs

  ASoC drivers:
   - New drivers for Allwinner V3s SoCs
   - Ensonic ES8316 codec support
   - More Intel SKL and KBL works
   - More device support for Intel SST Atom (mostly for cheap tablets
     and 2-in-1 devices)
   - Support for Rockchip PDM controllers
   - Support for STM32 I2S and S/PDIF controllers
   - Support for ZTE AUD96P22 codecs

  HD-audio:
   - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
     for HP and Dell machines
   - A few more fixes for i915 component binding"

* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
  ALSA: hda - Fix unbalance of i915 module refcount
  ASoC: Intel: Skylake: Remove driver debugfs exit
  ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
  ALSA: hda/realtek - Remove GPIO_MASK
  ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
  ALSA: pcm: add a documentation for tracepoints
  ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
  ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
  ASoC: Intel: Skylake: Add support to read firmware registers
  ASoC: Intel: Skylake: Add sram address to sst_addr structure
  ASoC: Intel: Skylake: Debugfs facility to dump module config
  ASoC: Intel: Skylake: Add debugfs support
  ASoC: fix semicolon.cocci warnings
  ASoC: rt5645: Add quirk override by module option
  ASoC: rsnd: make arrays path and cmd_case static const
  ASoC: audio-graph-card: add widgets and routing for external amplifier support
  ASoC: audio-graph-card: update bindings for amplifier support
  ASoC: rt5665: calibration should be done before jack detection
  ASoC: rsnd: constify dev_pm_ops structures.
  ASoC: nau8825: change crosstalk-bypass property to bool type
  ...

3 files changed, 14 insertions, 375 deletions

diff --git a/drivers/dma/dw/Kconfig b/drivers/dma/dw/Kconfig
index 5a37b9fcf40d..04b9728c1d26 100644
--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -6,17 +6,12 @@ config DW_DMAC_CORE
 	tristate
 	select DMA_ENGINE
 
-config DW_DMAC_BIG_ENDIAN_IO
-	bool
-
 config DW_DMAC
 	tristate "Synopsys DesignWare AHB DMA platform driver"
 	select DW_DMAC_CORE
-	select DW_DMAC_BIG_ENDIAN_IO if AVR32
-	default y if CPU_AT32AP7000
 	help
 	  Support the Synopsys DesignWare AHB DMA controller. This
-	  can be integrated in chips such as the Atmel AT32ap7000.
+	  can be integrated in chips such as the Intel Cherrytrail.
 
 config DW_DMAC_PCI
 	tristate "Synopsys DesignWare AHB DMA PCI driver"
diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c
index e500950dad82..f43e6dafe446 100644
--- a/drivers/dma/dw/core.c
+++ b/drivers/dma/dw/core.c
@@ -561,92 +561,14 @@ static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc)
 	dwc_descriptor_complete(dwc, bad_desc, true);
 }
 
-/* --------------------- Cyclic DMA API extensions -------------------- */
-
-dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan)
-{
-	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-	return channel_readl(dwc, SAR);
-}
-EXPORT_SYMBOL(dw_dma_get_src_addr);
-
-dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan)
-{
-	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
-	return channel_readl(dwc, DAR);
-}
-EXPORT_SYMBOL(dw_dma_get_dst_addr);
-
-/* Called with dwc->lock held and all DMAC interrupts disabled */
-static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc,
-		u32 status_block, u32 status_err, u32 status_xfer)
-{
-	unsigned long flags;
-
-	if (status_block & dwc->mask) {
-		void (*callback)(void *param);
-		void *callback_param;
-
-		dev_vdbg(chan2dev(&dwc->chan), "new cyclic period llp 0x%08x\n",
-				channel_readl(dwc, LLP));
-		dma_writel(dw, CLEAR.BLOCK, dwc->mask);
-
-		callback = dwc->cdesc->period_callback;
-		callback_param = dwc->cdesc->period_callback_param;
-
-		if (callback)
-			callback(callback_param);
-	}
-
-	/*
-	 * Error and transfer complete are highly unlikely, and will most
-	 * likely be due to a configuration error by the user.
-	 */
-	if (unlikely(status_err & dwc->mask) ||
-			unlikely(status_xfer & dwc->mask)) {
-		unsigned int i;
-
-		dev_err(chan2dev(&dwc->chan),
-			"cyclic DMA unexpected %s interrupt, stopping DMA transfer\n",
-			status_xfer ? "xfer" : "error");
-
-		spin_lock_irqsave(&dwc->lock, flags);
-
-		dwc_dump_chan_regs(dwc);
-
-		dwc_chan_disable(dw, dwc);
-
-		/* Make sure DMA does not restart by loading a new list */
-		channel_writel(dwc, LLP, 0);
-		channel_writel(dwc, CTL_LO, 0);
-		channel_writel(dwc, CTL_HI, 0);
-
-		dma_writel(dw, CLEAR.BLOCK, dwc->mask);
-		dma_writel(dw, CLEAR.ERROR, dwc->mask);
-		dma_writel(dw, CLEAR.XFER, dwc->mask);
-
-		for (i = 0; i < dwc->cdesc->periods; i++)
-			dwc_dump_lli(dwc, dwc->cdesc->desc[i]);
-
-		spin_unlock_irqrestore(&dwc->lock, flags);
-	}
-
-	/* Re-enable interrupts */
-	channel_set_bit(dw, MASK.BLOCK, dwc->mask);
-}
-
-/* ------------------------------------------------------------------------- */
-
 static void dw_dma_tasklet(unsigned long data)
 {
 	struct dw_dma *dw = (struct dw_dma *)data;
 	struct dw_dma_chan *dwc;
-	u32 status_block;
 	u32 status_xfer;
 	u32 status_err;
 	unsigned int i;
 
-	status_block = dma_readl(dw, RAW.BLOCK);
 	status_xfer = dma_readl(dw, RAW.XFER);
 	status_err = dma_readl(dw, RAW.ERROR);
 
@@ -655,8 +577,7 @@ static void dw_dma_tasklet(unsigned long data)
 	for (i = 0; i < dw->dma.chancnt; i++) {
 		dwc = &dw->chan[i];
 		if (test_bit(DW_DMA_IS_CYCLIC, &dwc->flags))
-			dwc_handle_cyclic(dw, dwc, status_block, status_err,
-					status_xfer);
+			dev_vdbg(dw->dma.dev, "Cyclic xfer is not implemented\n");
 		else if (status_err & (1 << i))
 			dwc_handle_error(dw, dwc);
 		else if (status_xfer & (1 << i))
@@ -1264,255 +1185,6 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
 	dev_vdbg(chan2dev(chan), "%s: done\n", __func__);
 }
 
-/* --------------------- Cyclic DMA API extensions -------------------- */
-
-/**
- * dw_dma_cyclic_start - start the cyclic DMA transfer
- * @chan: the DMA channel to start
- *
- * Must be called with soft interrupts disabled. Returns zero on success or
- * -errno on failure.
- */
-int dw_dma_cyclic_start(struct dma_chan *chan)
-{
-	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
-	struct dw_dma		*dw = to_dw_dma(chan->device);
-	unsigned long		flags;
-
-	if (!test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) {
-		dev_err(chan2dev(&dwc->chan), "missing prep for cyclic DMA\n");
-		return -ENODEV;
-	}
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	/* Enable interrupts to perform cyclic transfer */
-	channel_set_bit(dw, MASK.BLOCK, dwc->mask);
-
-	dwc_dostart(dwc, dwc->cdesc->desc[0]);
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	return 0;
-}
-EXPORT_SYMBOL(dw_dma_cyclic_start);
-
-/**
- * dw_dma_cyclic_stop - stop the cyclic DMA transfer
- * @chan: the DMA channel to stop
- *
- * Must be called with soft interrupts disabled.
- */
-void dw_dma_cyclic_stop(struct dma_chan *chan)
-{
-	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
-	struct dw_dma		*dw = to_dw_dma(dwc->chan.device);
-	unsigned long		flags;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	dwc_chan_disable(dw, dwc);
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-}
-EXPORT_SYMBOL(dw_dma_cyclic_stop);
-
-/**
- * dw_dma_cyclic_prep - prepare the cyclic DMA transfer
- * @chan: the DMA channel to prepare
- * @buf_addr: physical DMA address where the buffer starts
- * @buf_len: total number of bytes for the entire buffer
- * @period_len: number of bytes for each period
- * @direction: transfer direction, to or from device
- *
- * Must be called before trying to start the transfer. Returns a valid struct
- * dw_cyclic_desc if successful or an ERR_PTR(-errno) if not successful.
- */
-struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan,
-		dma_addr_t buf_addr, size_t buf_len, size_t period_len,
-		enum dma_transfer_direction direction)
-{
-	struct dw_dma_chan		*dwc = to_dw_dma_chan(chan);
-	struct dma_slave_config		*sconfig = &dwc->dma_sconfig;
-	struct dw_cyclic_desc		*cdesc;
-	struct dw_cyclic_desc		*retval = NULL;
-	struct dw_desc			*desc;
-	struct dw_desc			*last = NULL;
-	u8				lms = DWC_LLP_LMS(dwc->dws.m_master);
-	unsigned long			was_cyclic;
-	unsigned int			reg_width;
-	unsigned int			periods;
-	unsigned int			i;
-	unsigned long			flags;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-	if (dwc->nollp) {
-		spin_unlock_irqrestore(&dwc->lock, flags);
-		dev_dbg(chan2dev(&dwc->chan),
-				"channel doesn't support LLP transfers\n");
-		return ERR_PTR(-EINVAL);
-	}
-
-	if (!list_empty(&dwc->queue) || !list_empty(&dwc->active_list)) {
-		spin_unlock_irqrestore(&dwc->lock, flags);
-		dev_dbg(chan2dev(&dwc->chan),
-				"queue and/or active list are not empty\n");
-		return ERR_PTR(-EBUSY);
-	}
-
-	was_cyclic = test_and_set_bit(DW_DMA_IS_CYCLIC, &dwc->flags);
-	spin_unlock_irqrestore(&dwc->lock, flags);
-	if (was_cyclic) {
-		dev_dbg(chan2dev(&dwc->chan),
-				"channel already prepared for cyclic DMA\n");
-		return ERR_PTR(-EBUSY);
-	}
-
-	retval = ERR_PTR(-EINVAL);
-
-	if (unlikely(!is_slave_direction(direction)))
-		goto out_err;
-
-	dwc->direction = direction;
-
-	if (direction == DMA_MEM_TO_DEV)
-		reg_width = __ffs(sconfig->dst_addr_width);
-	else
-		reg_width = __ffs(sconfig->src_addr_width);
-
-	periods = buf_len / period_len;
-
-	/* Check for too big/unaligned periods and unaligned DMA buffer. */
-	if (period_len > (dwc->block_size << reg_width))
-		goto out_err;
-	if (unlikely(period_len & ((1 << reg_width) - 1)))
-		goto out_err;
-	if (unlikely(buf_addr & ((1 << reg_width) - 1)))
-		goto out_err;
-
-	retval = ERR_PTR(-ENOMEM);
-
-	cdesc = kzalloc(sizeof(struct dw_cyclic_desc), GFP_KERNEL);
-	if (!cdesc)
-		goto out_err;
-
-	cdesc->desc = kzalloc(sizeof(struct dw_desc *) * periods, GFP_KERNEL);
-	if (!cdesc->desc)
-		goto out_err_alloc;
-
-	for (i = 0; i < periods; i++) {
-		desc = dwc_desc_get(dwc);
-		if (!desc)
-			goto out_err_desc_get;
-
-		switch (direction) {
-		case DMA_MEM_TO_DEV:
-			lli_write(desc, dar, sconfig->dst_addr);
-			lli_write(desc, sar, buf_addr + period_len * i);
-			lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan)
-				| DWC_CTLL_DST_WIDTH(reg_width)
-				| DWC_CTLL_SRC_WIDTH(reg_width)
-				| DWC_CTLL_DST_FIX
-				| DWC_CTLL_SRC_INC
-				| DWC_CTLL_INT_EN));
-
-			lli_set(desc, ctllo, sconfig->device_fc ?
-					DWC_CTLL_FC(DW_DMA_FC_P_M2P) :
-					DWC_CTLL_FC(DW_DMA_FC_D_M2P));
-
-			break;
-		case DMA_DEV_TO_MEM:
-			lli_write(desc, dar, buf_addr + period_len * i);
-			lli_write(desc, sar, sconfig->src_addr);
-			lli_write(desc, ctllo, (DWC_DEFAULT_CTLLO(chan)
-				| DWC_CTLL_SRC_WIDTH(reg_width)
-				| DWC_CTLL_DST_WIDTH(reg_width)
-				| DWC_CTLL_DST_INC
-				| DWC_CTLL_SRC_FIX
-				| DWC_CTLL_INT_EN));
-
-			lli_set(desc, ctllo, sconfig->device_fc ?
-					DWC_CTLL_FC(DW_DMA_FC_P_P2M) :
-					DWC_CTLL_FC(DW_DMA_FC_D_P2M));
-
-			break;
-		default:
-			break;
-		}
-
-		lli_write(desc, ctlhi, period_len >> reg_width);
-		cdesc->desc[i] = desc;
-
-		if (last)
-			lli_write(last, llp, desc->txd.phys | lms);
-
-		last = desc;
-	}
-
-	/* Let's make a cyclic list */
-	lli_write(last, llp, cdesc->desc[0]->txd.phys | lms);
-
-	dev_dbg(chan2dev(&dwc->chan),
-			"cyclic prepared buf %pad len %zu period %zu periods %d\n",
-			&buf_addr, buf_len, period_len, periods);
-
-	cdesc->periods = periods;
-	dwc->cdesc = cdesc;
-
-	return cdesc;
-
-out_err_desc_get:
-	while (i--)
-		dwc_desc_put(dwc, cdesc->desc[i]);
-out_err_alloc:
-	kfree(cdesc);
-out_err:
-	clear_bit(DW_DMA_IS_CYCLIC, &dwc->flags);
-	return (struct dw_cyclic_desc *)retval;
-}
-EXPORT_SYMBOL(dw_dma_cyclic_prep);
-
-/**
- * dw_dma_cyclic_free - free a prepared cyclic DMA transfer
- * @chan: the DMA channel to free
- */
-void dw_dma_cyclic_free(struct dma_chan *chan)
-{
-	struct dw_dma_chan	*dwc = to_dw_dma_chan(chan);
-	struct dw_dma		*dw = to_dw_dma(dwc->chan.device);
-	struct dw_cyclic_desc	*cdesc = dwc->cdesc;
-	unsigned int		i;
-	unsigned long		flags;
-
-	dev_dbg(chan2dev(&dwc->chan), "%s\n", __func__);
-
-	if (!cdesc)
-		return;
-
-	spin_lock_irqsave(&dwc->lock, flags);
-
-	dwc_chan_disable(dw, dwc);
-
-	dma_writel(dw, CLEAR.BLOCK, dwc->mask);
-	dma_writel(dw, CLEAR.ERROR, dwc->mask);
-	dma_writel(dw, CLEAR.XFER, dwc->mask);
-
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	for (i = 0; i < cdesc->periods; i++)
-		dwc_desc_put(dwc, cdesc->desc[i]);
-
-	kfree(cdesc->desc);
-	kfree(cdesc);
-
-	dwc->cdesc = NULL;
-
-	clear_bit(DW_DMA_IS_CYCLIC, &dwc->flags);
-}
-EXPORT_SYMBOL(dw_dma_cyclic_free);
-
-/*----------------------------------------------------------------------*/
-
 int dw_dma_probe(struct dw_dma_chip *chip)
 {
 	struct dw_dma_platform_data *pdata;
@@ -1642,7 +1314,7 @@ int dw_dma_probe(struct dw_dma_chip *chip)
 		if (autocfg) {
 			unsigned int r = DW_DMA_MAX_NR_CHANNELS - i - 1;
 			void __iomem *addr = &__dw_regs(dw)->DWC_PARAMS[r];
-			unsigned int dwc_params = dma_readl_native(addr);
+			unsigned int dwc_params = readl(addr);
 
 			dev_dbg(chip->dev, "DWC_PARAMS[%d]: 0x%08x\n", i,
 					   dwc_params);
diff --git a/drivers/dma/dw/regs.h b/drivers/dma/dw/regs.h
index 32a328721c88..09e7dfdbb790 100644
--- a/drivers/dma/dw/regs.h
+++ b/drivers/dma/dw/regs.h
@@ -116,20 +116,6 @@ struct dw_dma_regs {
 	DW_REG(GLOBAL_CFG);
 };
 
-/*
- * Big endian I/O access when reading and writing to the DMA controller
- * registers.  This is needed on some platforms, like the Atmel AVR32
- * architecture.
- */
-
-#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-#define dma_readl_native ioread32be
-#define dma_writel_native iowrite32be
-#else
-#define dma_readl_native readl
-#define dma_writel_native writel
-#endif
-
 /* Bitfields in DW_PARAMS */
 #define DW_PARAMS_NR_CHAN	8		/* number of channels */
 #define DW_PARAMS_NR_MASTER	11		/* number of AHB masters */
@@ -280,7 +266,6 @@ struct dw_dma_chan {
 	unsigned long		flags;
 	struct list_head	active_list;
 	struct list_head	queue;
-	struct dw_cyclic_desc	*cdesc;
 
 	unsigned int		descs_allocated;
 
@@ -302,9 +287,9 @@ __dwc_regs(struct dw_dma_chan *dwc)
 }
 
 #define channel_readl(dwc, name) \
-	dma_readl_native(&(__dwc_regs(dwc)->name))
+	readl(&(__dwc_regs(dwc)->name))
 #define channel_writel(dwc, name, val) \
-	dma_writel_native((val), &(__dwc_regs(dwc)->name))
+	writel((val), &(__dwc_regs(dwc)->name))
 
 static inline struct dw_dma_chan *to_dw_dma_chan(struct dma_chan *chan)
 {
@@ -333,9 +318,9 @@ static inline struct dw_dma_regs __iomem *__dw_regs(struct dw_dma *dw)
 }
 
 #define dma_readl(dw, name) \
-	dma_readl_native(&(__dw_regs(dw)->name))
+	readl(&(__dw_regs(dw)->name))
 #define dma_writel(dw, name, val) \
-	dma_writel_native((val), &(__dw_regs(dw)->name))
+	writel((val), &(__dw_regs(dw)->name))
 
 #define idma32_readq(dw, name)				\
 	hi_lo_readq(&(__dw_regs(dw)->name))
@@ -352,43 +337,30 @@ static inline struct dw_dma *to_dw_dma(struct dma_device *ddev)
 	return container_of(ddev, struct dw_dma, dma);
 }
 
-#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-typedef __be32 __dw32;
-#else
-typedef __le32 __dw32;
-#endif
-
 /* LLI == Linked List Item; a.k.a. DMA block descriptor */
 struct dw_lli {
 	/* values that are not changed by hardware */
-	__dw32		sar;
-	__dw32		dar;
-	__dw32		llp;		/* chain to next lli */
-	__dw32		ctllo;
+	__le32		sar;
+	__le32		dar;
+	__le32		llp;		/* chain to next lli */
+	__le32		ctllo;
 	/* values that may get written back: */
-	__dw32		ctlhi;
+	__le32		ctlhi;
 	/* sstat and dstat can snapshot peripheral register state.
 	 * silicon config may discard either or both...
 	 */
-	__dw32		sstat;
-	__dw32		dstat;
+	__le32		sstat;
+	__le32		dstat;
 };
 
 struct dw_desc {
 	/* FIRST values the hardware uses */
 	struct dw_lli			lli;
 
-#ifdef CONFIG_DW_DMAC_BIG_ENDIAN_IO
-#define lli_set(d, reg, v)		((d)->lli.reg |= cpu_to_be32(v))
-#define lli_clear(d, reg, v)		((d)->lli.reg &= ~cpu_to_be32(v))
-#define lli_read(d, reg)		be32_to_cpu((d)->lli.reg)
-#define lli_write(d, reg, v)		((d)->lli.reg = cpu_to_be32(v))
-#else
 #define lli_set(d, reg, v)		((d)->lli.reg |= cpu_to_le32(v))
 #define lli_clear(d, reg, v)		((d)->lli.reg &= ~cpu_to_le32(v))
 #define lli_read(d, reg)		le32_to_cpu((d)->lli.reg)
 #define lli_write(d, reg, v)		((d)->lli.reg = cpu_to_le32(v))
-#endif
 
 	/* THEN values for driver housekeeping */
 	struct list_head		desc_node;