dmaengine: Revert "dmaengine: remove s3c24xx driver"

This reverts cccc46ae3623 ("dmaengine: remove s3c24xx driver") as it
causes regression due to missing header

Signed-off-by: Vinod Koul <vkoul@kernel.org>

3 files changed, 1441 insertions, 0 deletions

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index b9d54f20812f..80848c6b5cd5 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -610,6 +610,18 @@ config SPRD_DMA
 	help
 	  Enable support for the on-chip DMA controller on Spreadtrum platform.
 
+config S3C24XX_DMAC
+	bool "Samsung S3C24XX DMA support"
+	depends on ARCH_S3C24XX || COMPILE_TEST
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support for the Samsung S3C24XX DMA controller driver. The
+	  DMA controller is having multiple DMA channels which can be
+	  configured for different peripherals like audio, UART, SPI.
+	  The DMA controller can transfer data from memory to peripheral,
+	  periphal to memory, periphal to periphal and memory to memory.
+
 config TXX9_DMAC
 	tristate "Toshiba TXx9 SoC DMA support"
 	depends on MACH_TX49XX
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a4fd1ce29510..5b55ada052a7 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_STM32_DMA) += stm32-dma.o
 obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
 obj-$(CONFIG_STM32_MDMA) += stm32-mdma.o
 obj-$(CONFIG_SPRD_DMA) += sprd-dma.o
+obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_TEGRA186_GPC_DMA) += tegra186-gpc-dma.o
 obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
new file mode 100644
index 000000000000..a09eeb545f7d
--- /dev/null
+++ b/drivers/dma/s3c24xx-dma.c
@@ -0,0 +1,1428 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * S3C24XX DMA handling
+ *
+ * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
+ *
+ * based on amba-pl08x.c
+ *
+ * Copyright (c) 2006 ARM Ltd.
+ * Copyright (c) 2010 ST-Ericsson SA
+ *
+ * Author: Peter Pearse <peter.pearse@arm.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * The DMA controllers in S3C24XX SoCs have a varying number of DMA signals
+ * that can be routed to any of the 4 to 8 hardware-channels.
+ *
+ * Therefore on these DMA controllers the number of channels
+ * and the number of incoming DMA signals are two totally different things.
+ * It is usually not possible to theoretically handle all physical signals,
+ * so a multiplexing scheme with possible denial of use is necessary.
+ *
+ * Open items:
+ * - bursts
+ */
+
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/platform_data/dma-s3c24xx.h>
+
+#include "dmaengine.h"
+#include "virt-dma.h"
+
+#define MAX_DMA_CHANNELS	8
+
+#define S3C24XX_DISRC			0x00
+#define S3C24XX_DISRCC			0x04
+#define S3C24XX_DISRCC_INC_INCREMENT	0
+#define S3C24XX_DISRCC_INC_FIXED	BIT(0)
+#define S3C24XX_DISRCC_LOC_AHB		0
+#define S3C24XX_DISRCC_LOC_APB		BIT(1)
+
+#define S3C24XX_DIDST			0x08
+#define S3C24XX_DIDSTC			0x0c
+#define S3C24XX_DIDSTC_INC_INCREMENT	0
+#define S3C24XX_DIDSTC_INC_FIXED	BIT(0)
+#define S3C24XX_DIDSTC_LOC_AHB		0
+#define S3C24XX_DIDSTC_LOC_APB		BIT(1)
+#define S3C24XX_DIDSTC_INT_TC0		0
+#define S3C24XX_DIDSTC_INT_RELOAD	BIT(2)
+
+#define S3C24XX_DCON			0x10
+
+#define S3C24XX_DCON_TC_MASK		0xfffff
+#define S3C24XX_DCON_DSZ_BYTE		(0 << 20)
+#define S3C24XX_DCON_DSZ_HALFWORD	(1 << 20)
+#define S3C24XX_DCON_DSZ_WORD		(2 << 20)
+#define S3C24XX_DCON_DSZ_MASK		(3 << 20)
+#define S3C24XX_DCON_DSZ_SHIFT		20
+#define S3C24XX_DCON_AUTORELOAD		0
+#define S3C24XX_DCON_NORELOAD		BIT(22)
+#define S3C24XX_DCON_HWTRIG		BIT(23)
+#define S3C24XX_DCON_HWSRC_SHIFT	24
+#define S3C24XX_DCON_SERV_SINGLE	0
+#define S3C24XX_DCON_SERV_WHOLE		BIT(27)
+#define S3C24XX_DCON_TSZ_UNIT		0
+#define S3C24XX_DCON_TSZ_BURST4		BIT(28)
+#define S3C24XX_DCON_INT		BIT(29)
+#define S3C24XX_DCON_SYNC_PCLK		0
+#define S3C24XX_DCON_SYNC_HCLK		BIT(30)
+#define S3C24XX_DCON_DEMAND		0
+#define S3C24XX_DCON_HANDSHAKE		BIT(31)
+
+#define S3C24XX_DSTAT			0x14
+#define S3C24XX_DSTAT_STAT_BUSY		BIT(20)
+#define S3C24XX_DSTAT_CURRTC_MASK	0xfffff
+
+#define S3C24XX_DMASKTRIG		0x20
+#define S3C24XX_DMASKTRIG_SWTRIG	BIT(0)
+#define S3C24XX_DMASKTRIG_ON		BIT(1)
+#define S3C24XX_DMASKTRIG_STOP		BIT(2)
+
+#define S3C24XX_DMAREQSEL		0x24
+#define S3C24XX_DMAREQSEL_HW		BIT(0)
+
+/*
+ * S3C2410, S3C2440 and S3C2442 SoCs cannot select any physical channel
+ * for a DMA source. Instead only specific channels are valid.
+ * All of these SoCs have 4 physical channels and the number of request
+ * source bits is 3. Additionally we also need 1 bit to mark the channel
+ * as valid.
+ * Therefore we separate the chansel element of the channel data into 4
+ * parts of 4 bits each, to hold the information if the channel is valid
+ * and the hw request source to use.
+ *
+ * Example:
+ * SDI is valid on channels 0, 2 and 3 - with varying hw request sources.
+ * For it the chansel field would look like
+ *
+ * ((BIT(3) | 1) << 3 * 4) | // channel 3, with request source 1
+ * ((BIT(3) | 2) << 2 * 4) | // channel 2, with request source 2
+ * ((BIT(3) | 2) << 0 * 4)   // channel 0, with request source 2
+ */
+#define S3C24XX_CHANSEL_WIDTH		4
+#define S3C24XX_CHANSEL_VALID		BIT(3)
+#define S3C24XX_CHANSEL_REQ_MASK	7
+
+/*
+ * struct soc_data - vendor-specific config parameters for individual SoCs
+ * @stride: spacing between the registers of each channel
+ * @has_reqsel: does the controller use the newer requestselection mechanism
+ * @has_clocks: are controllable dma-clocks present
+ */
+struct soc_data {
+	int stride;
+	bool has_reqsel;
+	bool has_clocks;
+};
+
+/*
+ * enum s3c24xx_dma_chan_state - holds the virtual channel states
+ * @S3C24XX_DMA_CHAN_IDLE: the channel is idle
+ * @S3C24XX_DMA_CHAN_RUNNING: the channel has allocated a physical transport
+ * channel and is running a transfer on it
+ * @S3C24XX_DMA_CHAN_WAITING: the channel is waiting for a physical transport
+ * channel to become available (only pertains to memcpy channels)
+ */
+enum s3c24xx_dma_chan_state {
+	S3C24XX_DMA_CHAN_IDLE,
+	S3C24XX_DMA_CHAN_RUNNING,
+	S3C24XX_DMA_CHAN_WAITING,
+};
+
+/*
+ * struct s3c24xx_sg - structure containing data per sg
+ * @src_addr: src address of sg
+ * @dst_addr: dst address of sg
+ * @len: transfer len in bytes
+ * @node: node for txd's dsg_list
+ */
+struct s3c24xx_sg {
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	size_t len;
+	struct list_head node;
+};
+
+/*
+ * struct s3c24xx_txd - wrapper for struct dma_async_tx_descriptor
+ * @vd: virtual DMA descriptor
+ * @dsg_list: list of children sg's
+ * @at: sg currently being transfered
+ * @width: transfer width
+ * @disrcc: value for source control register
+ * @didstc: value for destination control register
+ * @dcon: base value for dcon register
+ * @cyclic: indicate cyclic transfer
+ */
+struct s3c24xx_txd {
+	struct virt_dma_desc vd;
+	struct list_head dsg_list;
+	struct list_head *at;
+	u8 width;
+	u32 disrcc;
+	u32 didstc;
+	u32 dcon;
+	bool cyclic;
+};
+
+struct s3c24xx_dma_chan;
+
+/*
+ * struct s3c24xx_dma_phy - holder for the physical channels
+ * @id: physical index to this channel
+ * @valid: does the channel have all required elements
+ * @base: virtual memory base (remapped) for the this channel
+ * @irq: interrupt for this channel
+ * @clk: clock for this channel
+ * @lock: a lock to use when altering an instance of this struct
+ * @serving: virtual channel currently being served by this physicalchannel
+ * @host: a pointer to the host (internal use)
+ */
+struct s3c24xx_dma_phy {
+	unsigned int			id;
+	bool				valid;
+	void __iomem			*base;
+	int				irq;
+	struct clk			*clk;
+	spinlock_t			lock;
+	struct s3c24xx_dma_chan		*serving;
+	struct s3c24xx_dma_engine	*host;
+};
+
+/*
+ * struct s3c24xx_dma_chan - this structure wraps a DMA ENGINE channel
+ * @id: the id of the channel
+ * @name: name of the channel
+ * @vc: wrapped virtual channel
+ * @phy: the physical channel utilized by this channel, if there is one
+ * @runtime_addr: address for RX/TX according to the runtime config
+ * @at: active transaction on this channel
+ * @lock: a lock for this channel data
+ * @host: a pointer to the host (internal use)
+ * @state: whether the channel is idle, running etc
+ * @slave: whether this channel is a device (slave) or for memcpy
+ */
+struct s3c24xx_dma_chan {
+	int id;
+	const char *name;
+	struct virt_dma_chan vc;
+	struct s3c24xx_dma_phy *phy;
+	struct dma_slave_config cfg;
+	struct s3c24xx_txd *at;
+	struct s3c24xx_dma_engine *host;
+	enum s3c24xx_dma_chan_state state;
+	bool slave;
+};
+
+/*
+ * struct s3c24xx_dma_engine - the local state holder for the S3C24XX
+ * @pdev: the corresponding platform device
+ * @pdata: platform data passed in from the platform/machine
+ * @base: virtual memory base (remapped)
+ * @slave: slave engine for this instance
+ * @memcpy: memcpy engine for this instance
+ * @phy_chans: array of data for the physical channels
+ */
+struct s3c24xx_dma_engine {
+	struct platform_device			*pdev;
+	const struct s3c24xx_dma_platdata	*pdata;
+	struct soc_data				*sdata;
+	void __iomem				*base;
+	struct dma_device			slave;
+	struct dma_device			memcpy;
+	struct s3c24xx_dma_phy			*phy_chans;
+};
+
+/*
+ * Physical channel handling
+ */
+
+/*
+ * Check whether a certain channel is busy or not.
+ */
+static int s3c24xx_dma_phy_busy(struct s3c24xx_dma_phy *phy)
+{
+	unsigned int val = readl(phy->base + S3C24XX_DSTAT);
+	return val & S3C24XX_DSTAT_STAT_BUSY;
+}
+
+static bool s3c24xx_dma_phy_valid(struct s3c24xx_dma_chan *s3cchan,
+				  struct s3c24xx_dma_phy *phy)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	int phyvalid;
+
+	/* every phy is valid for memcopy channels */
+	if (!s3cchan->slave)
+		return true;
+
+	/* On newer variants all phys can be used for all virtual channels */
+	if (s3cdma->sdata->has_reqsel)
+		return true;
+
+	phyvalid = (cdata->chansel >> (phy->id * S3C24XX_CHANSEL_WIDTH));
+	return (phyvalid & S3C24XX_CHANSEL_VALID) ? true : false;
+}
+
+/*
+ * Allocate a physical channel for a virtual channel
+ *
+ * Try to locate a physical channel to be used for this transfer. If all
+ * are taken return NULL and the requester will have to cope by using
+ * some fallback PIO mode or retrying later.
+ */
+static
+struct s3c24xx_dma_phy *s3c24xx_dma_get_phy(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy = NULL;
+	unsigned long flags;
+	int i;
+	int ret;
+
+	for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) {
+		phy = &s3cdma->phy_chans[i];
+
+		if (!phy->valid)
+			continue;
+
+		if (!s3c24xx_dma_phy_valid(s3cchan, phy))
+			continue;
+
+		spin_lock_irqsave(&phy->lock, flags);
+
+		if (!phy->serving) {
+			phy->serving = s3cchan;
+			spin_unlock_irqrestore(&phy->lock, flags);
+			break;
+		}
+
+		spin_unlock_irqrestore(&phy->lock, flags);
+	}
+
+	/* No physical channel available, cope with it */
+	if (i == s3cdma->pdata->num_phy_channels) {
+		dev_warn(&s3cdma->pdev->dev, "no phy channel available\n");
+		return NULL;
+	}
+
+	/* start the phy clock */
+	if (s3cdma->sdata->has_clocks) {
+		ret = clk_enable(phy->clk);
+		if (ret) {
+			dev_err(&s3cdma->pdev->dev, "could not enable clock for channel %d, err %d\n",
+				phy->id, ret);
+			phy->serving = NULL;
+			return NULL;
+		}
+	}
+
+	return phy;
+}
+
+/*
+ * Mark the physical channel as free.
+ *
+ * This drops the link between the physical and virtual channel.
+ */
+static inline void s3c24xx_dma_put_phy(struct s3c24xx_dma_phy *phy)
+{
+	struct s3c24xx_dma_engine *s3cdma = phy->host;
+
+	if (s3cdma->sdata->has_clocks)
+		clk_disable(phy->clk);
+
+	phy->serving = NULL;
+}
+
+/*
+ * Stops the channel by writing the stop bit.
+ * This should not be used for an on-going transfer, but as a method of
+ * shutting down a channel (eg, when it's no longer used) or terminating a
+ * transfer.
+ */
+static void s3c24xx_dma_terminate_phy(struct s3c24xx_dma_phy *phy)
+{
+	writel(S3C24XX_DMASKTRIG_STOP, phy->base + S3C24XX_DMASKTRIG);
+}
+
+/*
+ * Virtual channel handling
+ */
+
+static inline
+struct s3c24xx_dma_chan *to_s3c24xx_dma_chan(struct dma_chan *chan)
+{
+	return container_of(chan, struct s3c24xx_dma_chan, vc.chan);
+}
+
+static u32 s3c24xx_dma_getbytes_chan(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	struct s3c24xx_txd *txd = s3cchan->at;
+	u32 tc = readl(phy->base + S3C24XX_DSTAT) & S3C24XX_DSTAT_CURRTC_MASK;
+
+	return tc * txd->width;
+}
+
+static int s3c24xx_dma_set_runtime_config(struct dma_chan *chan,
+				  struct dma_slave_config *config)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	unsigned long flags;
+	int ret = 0;
+
+	/* Reject definitely invalid configurations */
+	if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+	    config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
+		return -EINVAL;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+
+	if (!s3cchan->slave) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	s3cchan->cfg = *config;
+
+out:
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+	return ret;
+}
+
+/*
+ * Transfer handling
+ */
+
+static inline
+struct s3c24xx_txd *to_s3c24xx_txd(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct s3c24xx_txd, vd.tx);
+}
+
+static struct s3c24xx_txd *s3c24xx_dma_get_txd(void)
+{
+	struct s3c24xx_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+
+	if (txd) {
+		INIT_LIST_HEAD(&txd->dsg_list);
+		txd->dcon = S3C24XX_DCON_INT | S3C24XX_DCON_NORELOAD;
+	}
+
+	return txd;
+}
+
+static void s3c24xx_dma_free_txd(struct s3c24xx_txd *txd)
+{
+	struct s3c24xx_sg *dsg, *_dsg;
+
+	list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) {
+		list_del(&dsg->node);
+		kfree(dsg);
+	}
+
+	kfree(txd);
+}
+
+static void s3c24xx_dma_start_next_sg(struct s3c24xx_dma_chan *s3cchan,
+				       struct s3c24xx_txd *txd)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_sg *dsg = list_entry(txd->at, struct s3c24xx_sg, node);
+	u32 dcon = txd->dcon;
+	u32 val;
+
+	/* transfer-size and -count from len and width */
+	switch (txd->width) {
+	case 1:
+		dcon |= S3C24XX_DCON_DSZ_BYTE | dsg->len;
+		break;
+	case 2:
+		dcon |= S3C24XX_DCON_DSZ_HALFWORD | (dsg->len / 2);
+		break;
+	case 4:
+		dcon |= S3C24XX_DCON_DSZ_WORD | (dsg->len / 4);
+		break;
+	}
+
+	if (s3cchan->slave) {
+		struct s3c24xx_dma_channel *cdata =
+					&pdata->channels[s3cchan->id];
+
+		if (s3cdma->sdata->has_reqsel) {
+			writel_relaxed((cdata->chansel << 1) |
+							S3C24XX_DMAREQSEL_HW,
+					phy->base + S3C24XX_DMAREQSEL);
+		} else {
+			int csel = cdata->chansel >> (phy->id *
+							S3C24XX_CHANSEL_WIDTH);
+
+			csel &= S3C24XX_CHANSEL_REQ_MASK;
+			dcon |= csel << S3C24XX_DCON_HWSRC_SHIFT;
+			dcon |= S3C24XX_DCON_HWTRIG;
+		}
+	} else {
+		if (s3cdma->sdata->has_reqsel)
+			writel_relaxed(0, phy->base + S3C24XX_DMAREQSEL);
+	}
+
+	writel_relaxed(dsg->src_addr, phy->base + S3C24XX_DISRC);
+	writel_relaxed(txd->disrcc, phy->base + S3C24XX_DISRCC);
+	writel_relaxed(dsg->dst_addr, phy->base + S3C24XX_DIDST);
+	writel_relaxed(txd->didstc, phy->base + S3C24XX_DIDSTC);
+	writel_relaxed(dcon, phy->base + S3C24XX_DCON);
+
+	val = readl_relaxed(phy->base + S3C24XX_DMASKTRIG);
+	val &= ~S3C24XX_DMASKTRIG_STOP;
+	val |= S3C24XX_DMASKTRIG_ON;
+
+	/* trigger the dma operation for memcpy transfers */
+	if (!s3cchan->slave)
+		val |= S3C24XX_DMASKTRIG_SWTRIG;
+
+	writel(val, phy->base + S3C24XX_DMASKTRIG);
+}
+
+/*
+ * Set the initial DMA register values and start first sg.
+ */
+static void s3c24xx_dma_start_next_txd(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_phy *phy = s3cchan->phy;
+	struct virt_dma_desc *vd = vchan_next_desc(&s3cchan->vc);
+	struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
+
+	list_del(&txd->vd.node);
+
+	s3cchan->at = txd;
+
+	/* Wait for channel inactive */
+	while (s3c24xx_dma_phy_busy(phy))
+		cpu_relax();
+
+	/* point to the first element of the sg list */
+	txd->at = txd->dsg_list.next;
+	s3c24xx_dma_start_next_sg(s3cchan, txd);
+}
+
+/*
+ * Try to allocate a physical channel.  When successful, assign it to
+ * this virtual channel, and initiate the next descriptor.  The
+ * virtual channel lock must be held at this point.
+ */
+static void s3c24xx_dma_phy_alloc_and_start(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_phy *phy;
+
+	phy = s3c24xx_dma_get_phy(s3cchan);
+	if (!phy) {
+		dev_dbg(&s3cdma->pdev->dev, "no physical channel available for xfer on %s\n",
+			s3cchan->name);
+		s3cchan->state = S3C24XX_DMA_CHAN_WAITING;
+		return;
+	}
+
+	dev_dbg(&s3cdma->pdev->dev, "allocated physical channel %d for xfer on %s\n",
+		phy->id, s3cchan->name);
+
+	s3cchan->phy = phy;
+	s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
+
+	s3c24xx_dma_start_next_txd(s3cchan);
+}
+
+static void s3c24xx_dma_phy_reassign_start(struct s3c24xx_dma_phy *phy,
+	struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+
+	dev_dbg(&s3cdma->pdev->dev, "reassigned physical channel %d for xfer on %s\n",
+		phy->id, s3cchan->name);
+
+	/*
+	 * We do this without taking the lock; we're really only concerned
+	 * about whether this pointer is NULL or not, and we're guaranteed
+	 * that this will only be called when it _already_ is non-NULL.
+	 */
+	phy->serving = s3cchan;
+	s3cchan->phy = phy;
+	s3cchan->state = S3C24XX_DMA_CHAN_RUNNING;
+	s3c24xx_dma_start_next_txd(s3cchan);
+}
+
+/*
+ * Free a physical DMA channel, potentially reallocating it to another
+ * virtual channel if we have any pending.
+ */
+static void s3c24xx_dma_phy_free(struct s3c24xx_dma_chan *s3cchan)
+{
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_dma_chan *p, *next;
+
+retry:
+	next = NULL;
+
+	/* Find a waiting virtual channel for the next transfer. */
+	list_for_each_entry(p, &s3cdma->memcpy.channels, vc.chan.device_node)
+		if (p->state == S3C24XX_DMA_CHAN_WAITING) {
+			next = p;
+			break;
+		}
+
+	if (!next) {
+		list_for_each_entry(p, &s3cdma->slave.channels,
+				    vc.chan.device_node)
+			if (p->state == S3C24XX_DMA_CHAN_WAITING &&
+				      s3c24xx_dma_phy_valid(p, s3cchan->phy)) {
+				next = p;
+				break;
+			}
+	}
+
+	/* Ensure that the physical channel is stopped */
+	s3c24xx_dma_terminate_phy(s3cchan->phy);
+
+	if (next) {
+		bool success;
+
+		/*
+		 * Eww.  We know this isn't going to deadlock
+		 * but lockdep probably doesn't.
+		 */
+		spin_lock(&next->vc.lock);
+		/* Re-check the state now that we have the lock */
+		success = next->state == S3C24XX_DMA_CHAN_WAITING;
+		if (success)
+			s3c24xx_dma_phy_reassign_start(s3cchan->phy, next);
+		spin_unlock(&next->vc.lock);
+
+		/* If the state changed, try to find another channel */
+		if (!success)
+			goto retry;
+	} else {
+		/* No more jobs, so free up the physical channel */
+		s3c24xx_dma_put_phy(s3cchan->phy);
+	}
+
+	s3cchan->phy = NULL;
+	s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
+}
+
+static void s3c24xx_dma_desc_free(struct virt_dma_desc *vd)
+{
+	struct s3c24xx_txd *txd = to_s3c24xx_txd(&vd->tx);
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(vd->tx.chan);
+
+	if (!s3cchan->slave)
+		dma_descriptor_unmap(&vd->tx);
+
+	s3c24xx_dma_free_txd(txd);
+}
+
+static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
+{
+	struct s3c24xx_dma_phy *phy = data;
+	struct s3c24xx_dma_chan *s3cchan = phy->serving;
+	struct s3c24xx_txd *txd;
+
+	dev_dbg(&phy->host->pdev->dev, "interrupt on channel %d\n", phy->id);
+
+	/*
+	 * Interrupts happen to notify the completion of a transfer and the
+	 * channel should have moved into its stop state already on its own.
+	 * Therefore interrupts on channels not bound to a virtual channel
+	 * should never happen. Nevertheless send a terminate command to the
+	 * channel if the unlikely case happens.
+	 */
+	if (unlikely(!s3cchan)) {
+		dev_err(&phy->host->pdev->dev, "interrupt on unused channel %d\n",
+			phy->id);
+
+		s3c24xx_dma_terminate_phy(phy);
+
+		return IRQ_HANDLED;
+	}
+
+	spin_lock(&s3cchan->vc.lock);
+	txd = s3cchan->at;
+	if (txd) {
+		/* when more sg's are in this txd, start the next one */
+		if (!list_is_last(txd->at, &txd->dsg_list)) {
+			txd->at = txd->at->next;
+			if (txd->cyclic)
+				vchan_cyclic_callback(&txd->vd);
+			s3c24xx_dma_start_next_sg(s3cchan, txd);
+		} else if (!txd->cyclic) {
+			s3cchan->at = NULL;
+			vchan_cookie_complete(&txd->vd);
+
+			/*
+			 * And start the next descriptor (if any),
+			 * otherwise free this channel.
+			 */
+			if (vchan_next_desc(&s3cchan->vc))
+				s3c24xx_dma_start_next_txd(s3cchan);
+			else
+				s3c24xx_dma_phy_free(s3cchan);
+		} else {
+			vchan_cyclic_callback(&txd->vd);
+
+			/* Cyclic: reset at beginning */
+			txd->at = txd->dsg_list.next;
+			s3c24xx_dma_start_next_sg(s3cchan, txd);
+		}
+	}
+	spin_unlock(&s3cchan->vc.lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * The DMA ENGINE API
+ */
+
+static int s3c24xx_dma_terminate_all(struct dma_chan *chan)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	LIST_HEAD(head);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+
+	if (!s3cchan->phy && !s3cchan->at) {
+		dev_err(&s3cdma->pdev->dev, "trying to terminate already stopped channel %d\n",
+			s3cchan->id);
+		ret = -EINVAL;
+		goto unlock;
+	}
+
+	s3cchan->state = S3C24XX_DMA_CHAN_IDLE;
+
+	/* Mark physical channel as free */
+	if (s3cchan->phy)
+		s3c24xx_dma_phy_free(s3cchan);
+
+	/* Dequeue current job */
+	if (s3cchan->at) {
+		vchan_terminate_vdesc(&s3cchan->at->vd);
+		s3cchan->at = NULL;
+	}
+
+	/* Dequeue jobs not yet fired as well */
+
+	vchan_get_all_descriptors(&s3cchan->vc, &head);
+
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	vchan_dma_desc_free_list(&s3cchan->vc, &head);
+
+	return 0;
+
+unlock:
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	return ret;
+}
+
+static void s3c24xx_dma_synchronize(struct dma_chan *chan)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+
+	vchan_synchronize(&s3cchan->vc);
+}
+
+static void s3c24xx_dma_free_chan_resources(struct dma_chan *chan)
+{
+	/* Ensure all queued descriptors are freed */
+	vchan_free_chan_resources(to_virt_chan(chan));
+}
+
+static enum dma_status s3c24xx_dma_tx_status(struct dma_chan *chan,
+		dma_cookie_t cookie, struct dma_tx_state *txstate)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+	enum dma_status ret;
+	size_t bytes = 0;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+	ret = dma_cookie_status(chan, cookie, txstate);
+
+	/*
+	 * There's no point calculating the residue if there's
+	 * no txstate to store the value.
+	 */
+	if (ret == DMA_COMPLETE || !txstate) {
+		spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+		return ret;
+	}
+
+	vd = vchan_find_desc(&s3cchan->vc, cookie);
+	if (vd) {
+		/* On the issued list, so hasn't been processed yet */
+		txd = to_s3c24xx_txd(&vd->tx);
+
+		list_for_each_entry(dsg, &txd->dsg_list, node)
+			bytes += dsg->len;
+	} else {
+		/*
+		 * Currently running, so sum over the pending sg's and
+		 * the currently active one.
+		 */
+		txd = s3cchan->at;
+
+		dsg = list_entry(txd->at, struct s3c24xx_sg, node);
+		list_for_each_entry_from(dsg, &txd->dsg_list, node)
+			bytes += dsg->len;
+
+		bytes += s3c24xx_dma_getbytes_chan(s3cchan);
+	}
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+
+	/*
+	 * This cookie not complete yet
+	 * Get number of bytes left in the active transactions and queue
+	 */
+	dma_set_residue(txstate, bytes);
+
+	/* Whether waiting or running, we're in progress */
+	return ret;
+}
+
+/*
+ * Initialize a descriptor to be used by memcpy submit
+ */
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	int src_mod, dest_mod;
+
+	dev_dbg(&s3cdma->pdev->dev, "prepare memcpy of %zu bytes from %s\n",
+			len, s3cchan->name);
+
+	if ((len & S3C24XX_DCON_TC_MASK) != len) {
+		dev_err(&s3cdma->pdev->dev, "memcpy size %zu to large\n", len);
+		return NULL;
+	}
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+	if (!dsg) {
+		s3c24xx_dma_free_txd(txd);
+		return NULL;
+	}
+	list_add_tail(&dsg->node, &txd->dsg_list);
+
+	dsg->src_addr = src;
+	dsg->dst_addr = dest;
+	dsg->len = len;
+
+	/*
+	 * Determine a suitable transfer width.
+	 * The DMA controller cannot fetch/store information which is not
+	 * naturally aligned on the bus, i.e., a 4 byte fetch must start at
+	 * an address divisible by 4 - more generally addr % width must be 0.
+	 */
+	src_mod = src % 4;
+	dest_mod = dest % 4;
+	switch (len % 4) {
+	case 0:
+		txd->width = (src_mod == 0 && dest_mod == 0) ? 4 : 1;
+		break;
+	case 2:
+		txd->width = ((src_mod == 2 || src_mod == 0) &&
+			      (dest_mod == 2 || dest_mod == 0)) ? 2 : 1;
+		break;
+	default:
+		txd->width = 1;
+		break;
+	}
+
+	txd->disrcc = S3C24XX_DISRCC_LOC_AHB | S3C24XX_DISRCC_INC_INCREMENT;
+	txd->didstc = S3C24XX_DIDSTC_LOC_AHB | S3C24XX_DIDSTC_INC_INCREMENT;
+	txd->dcon |= S3C24XX_DCON_DEMAND | S3C24XX_DCON_SYNC_HCLK |
+		     S3C24XX_DCON_SERV_WHOLE;
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic(
+	struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
+	enum dma_transfer_direction direction, unsigned long flags)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	unsigned sg_len;
+	dma_addr_t slave_addr;
+	u32 hwcfg = 0;
+	int i;
+
+	dev_dbg(&s3cdma->pdev->dev,
+		"prepare cyclic transaction of %zu bytes with period %zu from %s\n",
+		size, period, s3cchan->name);
+
+	if (!is_slave_direction(direction)) {
+		dev_err(&s3cdma->pdev->dev,
+			"direction %d unsupported\n", direction);
+		return NULL;
+	}
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	txd->cyclic = 1;
+
+	if (cdata->handshake)
+		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
+
+	switch (cdata->bus) {
+	case S3C24XX_DMA_APB:
+		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_APB;
+		break;
+	case S3C24XX_DMA_AHB:
+		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
+		break;
+	}
+
+	/*
+	 * Always assume our peripheral desintation is a fixed
+	 * address in memory.
+	 */
+	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
+
+	/*
+	 * Individual dma operations are requested by the slave,
+	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
+	 */
+	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
+
+	if (direction == DMA_MEM_TO_DEV) {
+		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
+			      S3C24XX_DISRCC_INC_INCREMENT;
+		txd->didstc = hwcfg;
+		slave_addr = s3cchan->cfg.dst_addr;
+		txd->width = s3cchan->cfg.dst_addr_width;
+	} else {
+		txd->disrcc = hwcfg;
+		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
+			      S3C24XX_DIDSTC_INC_INCREMENT;
+		slave_addr = s3cchan->cfg.src_addr;
+		txd->width = s3cchan->cfg.src_addr_width;
+	}
+
+	sg_len = size / period;
+
+	for (i = 0; i < sg_len; i++) {
+		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+		if (!dsg) {
+			s3c24xx_dma_free_txd(txd);
+			return NULL;
+		}
+		list_add_tail(&dsg->node, &txd->dsg_list);
+
+		dsg->len = period;
+		/* Check last period length */
+		if (i == sg_len - 1)
+			dsg->len = size - period * i;
+		if (direction == DMA_MEM_TO_DEV) {
+			dsg->src_addr = addr + period * i;
+			dsg->dst_addr = slave_addr;
+		} else { /* DMA_DEV_TO_MEM */
+			dsg->src_addr = slave_addr;
+			dsg->dst_addr = addr + period * i;
+		}
+	}
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction direction,
+		unsigned long flags, void *context)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	struct scatterlist *sg;
+	dma_addr_t slave_addr;
+	u32 hwcfg = 0;
+	int tmp;
+
+	dev_dbg(&s3cdma->pdev->dev, "prepare transaction of %d bytes from %s\n",
+			sg_dma_len(sgl), s3cchan->name);
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	if (cdata->handshake)
+		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
+
+	switch (cdata->bus) {
+	case S3C24XX_DMA_APB:
+		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_APB;
+		break;
+	case S3C24XX_DMA_AHB:
+		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
+		break;
+	}
+
+	/*
+	 * Always assume our peripheral desintation is a fixed
+	 * address in memory.
+	 */
+	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
+
+	/*
+	 * Individual dma operations are requested by the slave,
+	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
+	 */
+	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
+
+	if (direction == DMA_MEM_TO_DEV) {
+		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
+			      S3C24XX_DISRCC_INC_INCREMENT;
+		txd->didstc = hwcfg;
+		slave_addr = s3cchan->cfg.dst_addr;
+		txd->width = s3cchan->cfg.dst_addr_width;
+	} else if (direction == DMA_DEV_TO_MEM) {
+		txd->disrcc = hwcfg;
+		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
+			      S3C24XX_DIDSTC_INC_INCREMENT;
+		slave_addr = s3cchan->cfg.src_addr;
+		txd->width = s3cchan->cfg.src_addr_width;
+	} else {
+		s3c24xx_dma_free_txd(txd);
+		dev_err(&s3cdma->pdev->dev,
+			"direction %d unsupported\n", direction);
+		return NULL;
+	}
+
+	for_each_sg(sgl, sg, sg_len, tmp) {
+		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+		if (!dsg) {
+			s3c24xx_dma_free_txd(txd);
+			return NULL;
+		}
+		list_add_tail(&dsg->node, &txd->dsg_list);
+
+		dsg->len = sg_dma_len(sg);
+		if (direction == DMA_MEM_TO_DEV) {
+			dsg->src_addr = sg_dma_address(sg);
+			dsg->dst_addr = slave_addr;
+		} else { /* DMA_DEV_TO_MEM */
+			dsg->src_addr = slave_addr;
+			dsg->dst_addr = sg_dma_address(sg);
+		}
+	}
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
+/*
+ * Slave transactions callback to the slave device to allow
+ * synchronization of slave DMA signals with the DMAC enable
+ */
+static void s3c24xx_dma_issue_pending(struct dma_chan *chan)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&s3cchan->vc.lock, flags);
+	if (vchan_issue_pending(&s3cchan->vc)) {
+		if (!s3cchan->phy && s3cchan->state != S3C24XX_DMA_CHAN_WAITING)
+			s3c24xx_dma_phy_alloc_and_start(s3cchan);
+	}
+	spin_unlock_irqrestore(&s3cchan->vc.lock, flags);
+}
+
+/*
+ * Bringup and teardown
+ */
+
+/*
+ * Initialise the DMAC memcpy/slave channels.
+ * Make a local wrapper to hold required data
+ */
+static int s3c24xx_dma_init_virtual_channels(struct s3c24xx_dma_engine *s3cdma,
+		struct dma_device *dmadev, unsigned int channels, bool slave)
+{
+	struct s3c24xx_dma_chan *chan;
+	int i;
+
+	INIT_LIST_HEAD(&dmadev->channels);
+
+	/*
+	 * Register as many memcpy as we have physical channels,
+	 * we won't always be able to use all but the code will have
+	 * to cope with that situation.
+	 */
+	for (i = 0; i < channels; i++) {
+		chan = devm_kzalloc(dmadev->dev, sizeof(*chan), GFP_KERNEL);
+		if (!chan)
+			return -ENOMEM;
+
+		chan->id = i;
+		chan->host = s3cdma;
+		chan->state = S3C24XX_DMA_CHAN_IDLE;
+
+		if (slave) {
+			chan->slave = true;
+			chan->name = kasprintf(GFP_KERNEL, "slave%d", i);
+			if (!chan->name)
+				return -ENOMEM;
+		} else {
+			chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);
+			if (!chan->name)
+				return -ENOMEM;
+		}
+		dev_dbg(dmadev->dev,
+			 "initialize virtual channel \"%s\"\n",
+			 chan->name);
+
+		chan->vc.desc_free = s3c24xx_dma_desc_free;
+		vchan_init(&chan->vc, dmadev);
+	}
+	dev_info(dmadev->dev, "initialized %d virtual %s channels\n",
+		 i, slave ? "slave" : "memcpy");
+	return i;
+}
+
+static void s3c24xx_dma_free_virtual_channels(struct dma_device *dmadev)
+{
+	struct s3c24xx_dma_chan *chan = NULL;
+	struct s3c24xx_dma_chan *next;
+
+	list_for_each_entry_safe(chan,
+				 next, &dmadev->channels, vc.chan.device_node) {
+		list_del(&chan->vc.chan.device_node);
+		tasklet_kill(&chan->vc.task);
+	}
+}
+
+/* s3c2410, s3c2440 and s3c2442 have a 0x40 stride without separate clocks */
+static struct soc_data soc_s3c2410 = {
+	.stride = 0x40,
+	.has_reqsel = false,
+	.has_clocks = false,
+};
+
+/* s3c2412 and s3c2413 have a 0x40 stride and dmareqsel mechanism */
+static struct soc_data soc_s3c2412 = {
+	.stride = 0x40,
+	.has_reqsel = true,
+	.has_clocks = true,
+};
+
+/* s3c2443 and following have a 0x100 stride and dmareqsel mechanism */
+static struct soc_data soc_s3c2443 = {
+	.stride = 0x100,
+	.has_reqsel = true,
+	.has_clocks = true,
+};
+
+static const struct platform_device_id s3c24xx_dma_driver_ids[] = {
+	{
+		.name		= "s3c2410-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2410,
+	}, {
+		.name		= "s3c2412-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2412,
+	}, {
+		.name		= "s3c2443-dma",
+		.driver_data	= (kernel_ulong_t)&soc_s3c2443,
+	},
+	{ },
+};
+
+static struct soc_data *s3c24xx_dma_get_soc_data(struct platform_device *pdev)
+{
+	return (struct soc_data *)
+			 platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_dma_probe(struct platform_device *pdev)
+{
+	const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct s3c24xx_dma_engine *s3cdma;
+	struct soc_data *sdata;
+	struct resource *res;
+	int ret;
+	int i;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "platform data missing\n");
+		return -ENODEV;
+	}
+
+	/* Basic sanity check */
+	if (pdata->num_phy_channels > MAX_DMA_CHANNELS) {
+		dev_err(&pdev->dev, "too many dma channels %d, max %d\n",
+			pdata->num_phy_channels, MAX_DMA_CHANNELS);
+		return -EINVAL;
+	}
+
+	sdata = s3c24xx_dma_get_soc_data(pdev);
+	if (!sdata)
+		return -EINVAL;
+
+	s3cdma = devm_kzalloc(&pdev->dev, sizeof(*s3cdma), GFP_KERNEL);
+	if (!s3cdma)
+		return -ENOMEM;
+
+	s3cdma->pdev = pdev;
+	s3cdma->pdata = pdata;
+	s3cdma->sdata = sdata;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	s3cdma->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(s3cdma->base))
+		return PTR_ERR(s3cdma->base);
+
+	s3cdma->phy_chans = devm_kcalloc(&pdev->dev,
+					      pdata->num_phy_channels,
+					      sizeof(struct s3c24xx_dma_phy),
+					      GFP_KERNEL);
+	if (!s3cdma->phy_chans)
+		return -ENOMEM;
+
+	/* acquire irqs and clocks for all physical channels */
+	for (i = 0; i < pdata->num_phy_channels; i++) {
+		struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+		char clk_name[6];
+
+		phy->id = i;
+		phy->base = s3cdma->base + (i * sdata->stride);
+		phy->host = s3cdma;
+
+		phy->irq = platform_get_irq(pdev, i);
+		if (phy->irq < 0)
+			continue;
+
+		ret = devm_request_irq(&pdev->dev, phy->irq, s3c24xx_dma_irq,
+				       0, pdev->name, phy);
+		if (ret) {
+			dev_err(&pdev->dev, "Unable to request irq for channel %d, error %d\n",
+				i, ret);
+			continue;
+		}
+
+		if (sdata->has_clocks) {
+			sprintf(clk_name, "dma.%d", i);
+			phy->clk = devm_clk_get(&pdev->dev, clk_name);
+			if (IS_ERR(phy->clk) && sdata->has_clocks) {
+				dev_err(&pdev->dev, "unable to acquire clock for channel %d, error %lu\n",
+					i, PTR_ERR(phy->clk));
+				continue;
+			}
+
+			ret = clk_prepare(phy->clk);
+			if (ret) {
+				dev_err(&pdev->dev, "clock for phy %d failed, error %d\n",
+					i, ret);
+				continue;
+			}
+		}
+
+		spin_lock_init(&phy->lock);
+		phy->valid = true;
+
+		dev_dbg(&pdev->dev, "physical channel %d is %s\n",
+			i, s3c24xx_dma_phy_busy(phy) ? "BUSY" : "FREE");
+	}
+
+	/* Initialize memcpy engine */
+	dma_cap_set(DMA_MEMCPY, s3cdma->memcpy.cap_mask);
+	dma_cap_set(DMA_PRIVATE, s3cdma->memcpy.cap_mask);
+	s3cdma->memcpy.dev = &pdev->dev;
+	s3cdma->memcpy.device_free_chan_resources =
+					s3c24xx_dma_free_chan_resources;
+	s3cdma->memcpy.device_prep_dma_memcpy = s3c24xx_dma_prep_memcpy;
+	s3cdma->memcpy.device_tx_status = s3c24xx_dma_tx_status;
+	s3cdma->memcpy.device_issue_pending = s3c24xx_dma_issue_pending;
+	s3cdma->memcpy.device_config = s3c24xx_dma_set_runtime_config;
+	s3cdma->memcpy.device_terminate_all = s3c24xx_dma_terminate_all;
+	s3cdma->memcpy.device_synchronize = s3c24xx_dma_synchronize;
+
+	/* Initialize slave engine for SoC internal dedicated peripherals */
+	dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s3cdma->slave.cap_mask);
+	dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask);
+	s3cdma->slave.dev = &pdev->dev;
+	s3cdma->slave.device_free_chan_resources =
+					s3c24xx_dma_free_chan_resources;
+	s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status;
+	s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending;
+	s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg;
+	s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic;
+	s3cdma->slave.device_config = s3c24xx_dma_set_runtime_config;
+	s3cdma->slave.device_terminate_all = s3c24xx_dma_terminate_all;
+	s3cdma->slave.device_synchronize = s3c24xx_dma_synchronize;
+	s3cdma->slave.filter.map = pdata->slave_map;
+	s3cdma->slave.filter.mapcnt = pdata->slavecnt;
+	s3cdma->slave.filter.fn = s3c24xx_dma_filter;
+
+	/* Register as many memcpy channels as there are physical channels */
+	ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->memcpy,
+						pdata->num_phy_channels, false);
+	if (ret <= 0) {
+		dev_warn(&pdev->dev,
+			 "%s failed to enumerate memcpy channels - %d\n",
+			 __func__, ret);
+		goto err_memcpy;
+	}
+
+	/* Register slave channels */
+	ret = s3c24xx_dma_init_virtual_channels(s3cdma, &s3cdma->slave,
+				pdata->num_channels, true);
+	if (ret <= 0) {
+		dev_warn(&pdev->dev,
+			"%s failed to enumerate slave channels - %d\n",
+				__func__, ret);
+		goto err_slave;
+	}
+
+	ret = dma_async_device_register(&s3cdma->memcpy);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"%s failed to register memcpy as an async device - %d\n",
+			__func__, ret);
+		goto err_memcpy_reg;
+	}
+
+	ret = dma_async_device_register(&s3cdma->slave);
+	if (ret) {
+		dev_warn(&pdev->dev,
+			"%s failed to register slave as an async device - %d\n",
+			__func__, ret);
+		goto err_slave_reg;
+	}
+
+	platform_set_drvdata(pdev, s3cdma);
+	dev_info(&pdev->dev, "Loaded dma driver with %d physical channels\n",
+		 pdata->num_phy_channels);
+
+	return 0;
+
+err_slave_reg:
+	dma_async_device_unregister(&s3cdma->memcpy);
+err_memcpy_reg:
+	s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
+err_slave:
+	s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
+err_memcpy:
+	if (sdata->has_clocks)
+		for (i = 0; i < pdata->num_phy_channels; i++) {
+			struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+			if (phy->valid)
+				clk_unprepare(phy->clk);
+		}
+
+	return ret;
+}
+
+static void s3c24xx_dma_free_irq(struct platform_device *pdev,
+				struct s3c24xx_dma_engine *s3cdma)
+{
+	int i;
+
+	for (i = 0; i < s3cdma->pdata->num_phy_channels; i++) {
+		struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+
+		devm_free_irq(&pdev->dev, phy->irq, phy);
+	}
+}
+
+static int s3c24xx_dma_remove(struct platform_device *pdev)
+{
+	const struct s3c24xx_dma_platdata *pdata = dev_get_platdata(&pdev->dev);
+	struct s3c24xx_dma_engine *s3cdma = platform_get_drvdata(pdev);
+	struct soc_data *sdata = s3c24xx_dma_get_soc_data(pdev);
+	int i;
+
+	dma_async_device_unregister(&s3cdma->slave);
+	dma_async_device_unregister(&s3cdma->memcpy);
+
+	s3c24xx_dma_free_irq(pdev, s3cdma);
+
+	s3c24xx_dma_free_virtual_channels(&s3cdma->slave);
+	s3c24xx_dma_free_virtual_channels(&s3cdma->memcpy);
+
+	if (sdata->has_clocks)
+		for (i = 0; i < pdata->num_phy_channels; i++) {
+			struct s3c24xx_dma_phy *phy = &s3cdma->phy_chans[i];
+			if (phy->valid)
+				clk_unprepare(phy->clk);
+		}
+
+	return 0;
+}
+
+static struct platform_driver s3c24xx_dma_driver = {
+	.driver		= {
+		.name	= "s3c24xx-dma",
+	},
+	.id_table	= s3c24xx_dma_driver_ids,
+	.probe		= s3c24xx_dma_probe,
+	.remove		= s3c24xx_dma_remove,
+};
+
+module_platform_driver(s3c24xx_dma_driver);
+
+bool s3c24xx_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct s3c24xx_dma_chan *s3cchan;
+
+	if (chan->device->dev->driver != &s3c24xx_dma_driver.driver)
+		return false;
+
+	s3cchan = to_s3c24xx_dma_chan(chan);
+
+	return s3cchan->id == (uintptr_t)param;
+}
+EXPORT_SYMBOL(s3c24xx_dma_filter);
+
+MODULE_DESCRIPTION("S3C24XX DMA Driver");
+MODULE_AUTHOR("Heiko Stuebner");
+MODULE_LICENSE("GPL v2");