summaryrefslogtreecommitdiff
path: root/drivers/dma/ste_dma40_ll.h
diff options
context:
space:
mode:
authorLukas Wunner <lukas@wunner.de>2016-10-28 11:52:06 +0300
committerBjorn Helgaas <bhelgaas@google.com>2016-11-18 04:00:29 +0300
commit68db9bc814362e7f24371c27d12a4f34477d9356 (patch)
tree9362415c685bbc117a3733f8bb1570adb595a617 /drivers/dma/ste_dma40_ll.h
parent437eb7bf7b28472f8b7689e166dc1dd691367121 (diff)
downloadlinux-68db9bc814362e7f24371c27d12a4f34477d9356.tar.xz
PCI: pciehp: Add runtime PM support for PCIe hotplug ports
Linux 4.8 added support for runtime suspending PCIe ports to D3hot with commit 006d44e49a25 ("PCI: Add runtime PM support for PCIe ports"), but excluded hotplug ports. Those are now afforded runtime PM by the present commit. Hotplug ports require a few extra considerations: - The configuration space of the port remains accessible in D3hot, so all the functions to read or modify the Slot Status and Slot Control registers need not be modified. Even turning on slot power doesn't seem to require the port to be in D0, at least the PCIe spec doesn't say so and I confirmed that by testing with a Thunderbolt controller. - However D0 is required to access devices on the secondary bus. This happens in pciehp_check_link_status() and pciehp_configure_device() (both called from board_added()) and in pciehp_unconfigure_device() (called from remove_board()), so acquire a runtime PM ref for their invocation. - The hotplug port stays active as long as it has active children. If all hotplugged devices below the port runtime suspend, the port is allowed to runtime suspend as well. Plug and unplug detection continues to work in D3hot. - Hotplug interrupts are delivered in-band, so while the hotplug port itself is allowed to go to D3hot, its parent ports must stay in D0 for interrupts to come through. Add a corresponding restriction to pci_dev_check_d3cold(). - Runtime PM may only be allowed if the hotplug port is handled natively by the OS. On ACPI systems, the port may alternatively be handled by the firmware and things break if the OS puts the port into D3 behind the firmware's back: E.g. Thunderbolt hotplug ports on non-Macs are handled by Intel's firmware in System Management Mode and the firmware is known to access devices on the port's secondary bus without checking first if the port is in D0: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com>
Diffstat (limited to 'drivers/dma/ste_dma40_ll.h')
0 files changed, 0 insertions, 0 deletions