summaryrefslogtreecommitdiff
path: root/drivers/crypto/mediatek/mtk-sha.c
diff options
context:
space:
mode:
authorFilipe Manana <fdmanana@suse.com>2020-05-27 13:16:07 +0300
committerDavid Sterba <dsterba@suse.com>2020-05-28 15:01:53 +0300
commit467dc47ea99c56e966e99d09dae54869850abeeb (patch)
tree6ba848b9a9190c5acc4b96adb735fa00db10f990 /drivers/crypto/mediatek/mtk-sha.c
parente2c8e92d1140754073ad3799eb6620c76bab2078 (diff)
downloadlinux-467dc47ea99c56e966e99d09dae54869850abeeb.tar.xz
btrfs: fix space_info bytes_may_use underflow after nocow buffered write
When doing a buffered write we always try to reserve data space for it, even when the file has the NOCOW bit set or the write falls into a file range covered by a prealloc extent. This is done both because it is expensive to check if we can do a nocow write (checking if an extent is shared through reflinks or if there's a hole in the range for example), and because when writeback starts we might actually need to fallback to COW mode (for example the block group containing the target extents was turned into RO mode due to a scrub or balance). When we are unable to reserve data space we check if we can do a nocow write, and if we can, we proceed with dirtying the pages and setting up the range for delalloc. In this case the bytes_may_use counter of the data space_info object is not incremented, unlike in the case where we are able to reserve data space (done through btrfs_check_data_free_space() which calls btrfs_alloc_data_chunk_ondemand()). Later when running delalloc we attempt to start writeback in nocow mode but we might revert back to cow mode, for example because in the meanwhile a block group was turned into RO mode by a scrub or relocation. The cow path after successfully allocating an extent ends up calling btrfs_add_reserved_bytes(), which expects the bytes_may_use counter of the data space_info object to have been incremented before - but we did not do it when the buffered write started, since there was not enough available data space. So btrfs_add_reserved_bytes() ends up decrementing the bytes_may_use counter anyway, and when the counter's current value is smaller then the size of the allocated extent we get a stack trace like the following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 20138 at fs/btrfs/space-info.h:115 btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs] Modules linked in: btrfs blake2b_generic xor raid6_pq libcrc32c (...) CPU: 0 PID: 20138 Comm: kworker/u8:15 Not tainted 5.6.0-rc7-btrfs-next-58 #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Workqueue: writeback wb_workfn (flush-btrfs-1754) RIP: 0010:btrfs_add_reserved_bytes+0x3d6/0x4e0 [btrfs] Code: ff ff 48 (...) RSP: 0018:ffffbda18a4b3568 EFLAGS: 00010287 RAX: 0000000000000000 RBX: ffff9ca076f5d800 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff9ca068470410 RBP: fffffffffffff000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9ca079d58040 R11: 0000000000000000 R12: ffff9ca068470400 R13: ffff9ca0408b2000 R14: 0000000000001000 R15: ffff9ca076f5d800 FS: 0000000000000000(0000) GS:ffff9ca07a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005605dbfe7048 CR3: 0000000138570006 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: find_free_extent+0x4a0/0x16c0 [btrfs] btrfs_reserve_extent+0x91/0x180 [btrfs] cow_file_range+0x12d/0x490 [btrfs] run_delalloc_nocow+0x341/0xa40 [btrfs] btrfs_run_delalloc_range+0x1ea/0x6d0 [btrfs] ? find_lock_delalloc_range+0x221/0x250 [btrfs] writepage_delalloc+0xe8/0x150 [btrfs] __extent_writepage+0xe8/0x4c0 [btrfs] extent_write_cache_pages+0x237/0x530 [btrfs] ? btrfs_wq_submit_bio+0x9f/0xc0 [btrfs] extent_writepages+0x44/0xa0 [btrfs] do_writepages+0x23/0x80 __writeback_single_inode+0x59/0x700 writeback_sb_inodes+0x267/0x5f0 __writeback_inodes_wb+0x87/0xe0 wb_writeback+0x382/0x590 ? wb_workfn+0x4a2/0x6c0 wb_workfn+0x4a2/0x6c0 process_one_work+0x26d/0x6a0 worker_thread+0x4f/0x3e0 ? process_one_work+0x6a0/0x6a0 kthread+0x103/0x140 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x3a/0x50 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020 softirqs last enabled at (0): [<ffffffff94ebdedf>] copy_process+0x74f/0x2020 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace f9f6ef8ec4cd8ec9 ]--- So to fix this, when falling back into cow mode check if space was not reserved, by testing for the bit EXTENT_NORESERVE in the respective file range, and if not, increment the bytes_may_use counter for the data space_info object. Also clear the EXTENT_NORESERVE bit from the range, so that if the cow path fails it decrements the bytes_may_use counter when clearing the delalloc range (through the btrfs_clear_delalloc_extent() callback). Fixes: 7ee9e4405f264e ("Btrfs: check if we can nocow if we don't have data space") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
Diffstat (limited to 'drivers/crypto/mediatek/mtk-sha.c')
0 files changed, 0 insertions, 0 deletions