Merge branch 'akpm' (patches from Andrew Morton)

Merge second patch-bomb from Andrew Morton:
 - a few hotfixes
 - drivers/dma updates
 - MAINTAINERS updates
 - Quite a lot of lib/ updates
 - checkpatch updates
 - binfmt updates
 - autofs4
 - drivers/rtc/
 - various small tweaks to less used filesystems
 - ipc/ updates
 - kernel/watchdog.c changes

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits)
  mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
  kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h>
  ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[]
  frv: remove unused declarations of __start___ex_table and __stop___ex_table
  kvm: ensure hard lockup detection is disabled by default
  kernel/watchdog.c: control hard lockup detection default
  staging: rtl8192u: use %*pEn to escape buffer
  staging: rtl8192e: use %*pEn to escape buffer
  staging: wlan-ng: use %*pEhp to print SN
  lib80211: remove unused print_ssid()
  wireless: hostap: proc: print properly escaped SSID
  wireless: ipw2x00: print SSID via %*pE
  wireless: libertas: print esaped string via %*pE
  lib/vsprintf: add %*pE[achnops] format specifier
  lib / string_helpers: introduce string_escape_mem()
  lib / string_helpers: refactoring the test suite
  lib / string_helpers: move documentation to c-file
  include/linux: remove strict_strto* definitions
  arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable
  fs: check bh blocknr earlier when searching lru
  ...

3 files changed, 180 insertions, 0 deletions

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index cfd3af7b2cbd..84e0590e31dc 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686
 	---help---
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
+config COMMON_CLK_RK808
+	tristate "Clock driver for RK808"
+	depends on MFD_RK808
+	---help---
+	  This driver supports RK808 crystal oscillator clock. These
+	  multi-function devices have two fixed-rate oscillators,
+	  clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
+	  by control register.
+
 config COMMON_CLK_SI5351
 	tristate "Clock driver for SiLabs 5351A/B/C"
 	depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f537a0b1f798..99f53d5f8766 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
 obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
 obj-$(CONFIG_CLK_PPC_CORENET)		+= clk-ppc-corenet.o
+obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SI5351)		+= clk-si5351.o
 obj-$(CONFIG_COMMON_CLK_SI570)		+= clk-si570.o
diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
new file mode 100644
index 000000000000..83902b9cd49e
--- /dev/null
+++ b/drivers/clk/clk-rk808.c
@@ -0,0 +1,170 @@
+/*
+ * Clkout driver for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author:Chris Zhong <zyw@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/rk808.h>
+#include <linux/i2c.h>
+
+#define RK808_NR_OUTPUT 2
+
+struct rk808_clkout {
+	struct rk808 *rk808;
+	struct clk_onecell_data clk_data;
+	struct clk_hw		clkout1_hw;
+	struct clk_hw		clkout2_hw;
+};
+
+static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	return 32768;
+}
+
+static int rk808_clkout2_enable(struct clk_hw *hw, bool enable)
+{
+	struct rk808_clkout *rk808_clkout = container_of(hw,
+							 struct rk808_clkout,
+							 clkout2_hw);
+	struct rk808 *rk808 = rk808_clkout->rk808;
+
+	return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+				  CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
+}
+
+static int rk808_clkout2_prepare(struct clk_hw *hw)
+{
+	return rk808_clkout2_enable(hw, true);
+}
+
+static void rk808_clkout2_unprepare(struct clk_hw *hw)
+{
+	rk808_clkout2_enable(hw, false);
+}
+
+static int rk808_clkout2_is_prepared(struct clk_hw *hw)
+{
+	struct rk808_clkout *rk808_clkout = container_of(hw,
+							 struct rk808_clkout,
+							 clkout2_hw);
+	struct rk808 *rk808 = rk808_clkout->rk808;
+	uint32_t val;
+
+	int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+
+	if (ret < 0)
+		return ret;
+
+	return (val & CLK32KOUT2_EN) ? 1 : 0;
+}
+
+static const struct clk_ops rk808_clkout1_ops = {
+	.recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static const struct clk_ops rk808_clkout2_ops = {
+	.prepare = rk808_clkout2_prepare,
+	.unprepare = rk808_clkout2_unprepare,
+	.is_prepared = rk808_clkout2_is_prepared,
+	.recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static int rk808_clkout_probe(struct platform_device *pdev)
+{
+	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+	struct i2c_client *client = rk808->i2c;
+	struct device_node *node = client->dev.of_node;
+	struct clk_init_data init = {};
+	struct clk **clk_table;
+	struct rk808_clkout *rk808_clkout;
+
+	rk808_clkout = devm_kzalloc(&client->dev,
+				    sizeof(*rk808_clkout), GFP_KERNEL);
+	if (!rk808_clkout)
+		return -ENOMEM;
+
+	rk808_clkout->rk808 = rk808;
+
+	clk_table = devm_kcalloc(&client->dev, RK808_NR_OUTPUT,
+				 sizeof(struct clk *), GFP_KERNEL);
+	if (!clk_table)
+		return -ENOMEM;
+
+	init.flags = CLK_IS_ROOT;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	init.name = "rk808-clkout1";
+	init.ops = &rk808_clkout1_ops;
+	rk808_clkout->clkout1_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string_index(node, "clock-output-names",
+				      0, &init.name);
+
+	clk_table[0] = devm_clk_register(&client->dev,
+					 &rk808_clkout->clkout1_hw);
+	if (IS_ERR(clk_table[0]))
+		return PTR_ERR(clk_table[0]);
+
+	init.name = "rk808-clkout2";
+	init.ops = &rk808_clkout2_ops;
+	rk808_clkout->clkout2_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string_index(node, "clock-output-names",
+				      1, &init.name);
+
+	clk_table[1] = devm_clk_register(&client->dev,
+					 &rk808_clkout->clkout2_hw);
+	if (IS_ERR(clk_table[1]))
+		return PTR_ERR(clk_table[1]);
+
+	rk808_clkout->clk_data.clks = clk_table;
+	rk808_clkout->clk_data.clk_num = RK808_NR_OUTPUT;
+
+	return of_clk_add_provider(node, of_clk_src_onecell_get,
+				   &rk808_clkout->clk_data);
+}
+
+static int rk808_clkout_remove(struct platform_device *pdev)
+{
+	struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+	struct i2c_client *client = rk808->i2c;
+	struct device_node *node = client->dev.of_node;
+
+	of_clk_del_provider(node);
+
+	return 0;
+}
+
+static struct platform_driver rk808_clkout_driver = {
+	.probe = rk808_clkout_probe,
+	.remove = rk808_clkout_remove,
+	.driver		= {
+		.name	= "rk808-clkout",
+	},
+};
+
+module_platform_driver(rk808_clkout_driver);
+
+MODULE_DESCRIPTION("Clkout driver for the rk808 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk808-clkout");