diff options
author | Tero Kristo <t-kristo@ti.com> | 2015-03-03 14:27:48 +0300 |
---|---|---|
committer | Tero Kristo <t-kristo@ti.com> | 2015-06-02 12:31:14 +0300 |
commit | 0565fb168d63f89591ce7dcb85438cb19d939a92 (patch) | |
tree | 304b6823925c4115b5cd46a5d9a5883eb2539462 /drivers/clk | |
parent | 192383d87b876ea9879d8b598af593809a25b7d2 (diff) | |
download | linux-0565fb168d63f89591ce7dcb85438cb19d939a92.tar.xz |
clk: ti: dpll: move omap3 DPLL functionality to clock driver
With the legacy clock support gone, OMAP3 generic DPLL code can now be
moved over to the clock driver also. A few un-unused clkoutx2 functions
are also removed at the same time.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Diffstat (limited to 'drivers/clk')
-rw-r--r-- | drivers/clk/ti/Makefile | 14 | ||||
-rw-r--r-- | drivers/clk/ti/clk-3xxx.c | 31 | ||||
-rw-r--r-- | drivers/clk/ti/clock.h | 27 | ||||
-rw-r--r-- | drivers/clk/ti/dpll3xxx.c | 825 |
4 files changed, 891 insertions, 6 deletions
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 23cd72638970..05a0294aba10 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -2,16 +2,18 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o \ clkt_dpll.o clkt_iclk.o -obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o +obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o dpll3xxx.o obj-$(CONFIG_SOC_TI81XX) += $(clk-common) fapll.o clk-816x.o obj-$(CONFIG_ARCH_OMAP2) += $(clk-common) interface.o clk-2xxx.o obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o \ - clk-3xxx.o -obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o dpll44xx.o -obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o dpll44xx.o + clk-3xxx.o dpll3xxx.o +obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o \ + dpll3xxx.o dpll44xx.o +obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o \ + dpll3xxx.o dpll44xx.o obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o \ - clk-dra7-atl.o dpll44xx.o -obj-$(CONFIG_SOC_AM43XX) += $(clk-common) clk-43xx.o + clk-dra7-atl.o dpll3xxx.o dpll44xx.o +obj-$(CONFIG_SOC_AM43XX) += $(clk-common) dpll3xxx.o clk-43xx.o ifdef CONFIG_ATAGS obj-$(CONFIG_ARCH_OMAP3) += clk-3xxx-legacy.o diff --git a/drivers/clk/ti/clk-3xxx.c b/drivers/clk/ti/clk-3xxx.c index bb3b88359daf..5489ad8c07d4 100644 --- a/drivers/clk/ti/clk-3xxx.c +++ b/drivers/clk/ti/clk-3xxx.c @@ -21,6 +21,13 @@ #include "clock.h" +/* + * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks + * that are sourced by DPLL5, and both of these require this clock + * to be at 120 MHz for proper operation. + */ +#define DPLL5_FREQ_FOR_USBHOST 120000000 + static struct ti_dt_clk omap3xxx_clks[] = { DT_CLK(NULL, "apb_pclk", "dummy_apb_pclk"), DT_CLK(NULL, "omap_32k_fck", "omap_32k_fck"), @@ -325,6 +332,30 @@ enum { OMAP3_SOC_OMAP3630, }; +/** + * omap3_clk_lock_dpll5 - locks DPLL5 + * + * Locks DPLL5 to a pre-defined frequency. This is required for proper + * operation of USB. + */ +void __init omap3_clk_lock_dpll5(void) +{ + struct clk *dpll5_clk; + struct clk *dpll5_m2_clk; + + dpll5_clk = clk_get(NULL, "dpll5_ck"); + clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST); + clk_prepare_enable(dpll5_clk); + + /* Program dpll5_m2_clk divider for no division */ + dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck"); + clk_prepare_enable(dpll5_m2_clk); + clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST); + + clk_disable_unprepare(dpll5_m2_clk); + clk_disable_unprepare(dpll5_clk); +} + static int __init omap3xxx_dt_clk_init(int soc_type) { if (soc_type == OMAP3_SOC_AM35XX || soc_type == OMAP3_SOC_OMAP3630 || diff --git a/drivers/clk/ti/clock.h b/drivers/clk/ti/clock.h index 4b26af8a273d..688d9e47b2c8 100644 --- a/drivers/clk/ti/clock.h +++ b/drivers/clk/ti/clock.h @@ -173,11 +173,38 @@ void omap2_init_clk_hw_omap_clocks(struct clk *clk); int of_ti_clk_autoidle_setup(struct device_node *node); void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); +extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_iclk; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; u8 omap2_init_dpll_parent(struct clk_hw *hw); +int omap3_noncore_dpll_enable(struct clk_hw *hw); +void omap3_noncore_dpll_disable(struct clk_hw *hw); +int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index); +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate); +int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index); +long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk); +long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, + unsigned long *parent_rate); +unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, + unsigned long parent_rate); + +unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); +int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index); +void omap3_clk_lock_dpll5(void); unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, unsigned long parent_rate); diff --git a/drivers/clk/ti/dpll3xxx.c b/drivers/clk/ti/dpll3xxx.c new file mode 100644 index 000000000000..22d77a331287 --- /dev/null +++ b/drivers/clk/ti/dpll3xxx.c @@ -0,0 +1,825 @@ +/* + * OMAP3/4 - specific DPLL control functions + * + * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2010 Nokia Corporation + * + * Written by Paul Walmsley + * Testing and integration fixes by Jouni Högander + * + * 36xx support added by Vishwanath BS, Richard Woodruff, and Nishanth + * Menon + * + * Parts of this code are based on code written by + * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/bitops.h> +#include <linux/clkdev.h> +#include <linux/clk/ti.h> + +#include "clock.h" + +/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 + +#define MAX_DPLL_WAIT_TRIES 1000000 + +#define OMAP3XXX_EN_DPLL_LOCKED 0x7 + +/* Forward declarations */ +static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); +static void omap3_dpll_deny_idle(struct clk_hw_omap *clk); +static void omap3_dpll_allow_idle(struct clk_hw_omap *clk); + +/* Private functions */ + +/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ +static void _omap3_dpll_write_clken(struct clk_hw_omap *clk, u8 clken_bits) +{ + const struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = ti_clk_ll_ops->clk_readl(dd->control_reg); + v &= ~dd->enable_mask; + v |= clken_bits << __ffs(dd->enable_mask); + ti_clk_ll_ops->clk_writel(v, dd->control_reg); +} + +/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ +static int _omap3_wait_dpll_status(struct clk_hw_omap *clk, u8 state) +{ + const struct dpll_data *dd; + int i = 0; + int ret = -EINVAL; + const char *clk_name; + + dd = clk->dpll_data; + clk_name = __clk_get_name(clk->hw.clk); + + state <<= __ffs(dd->idlest_mask); + + while (((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) + != state) && i < MAX_DPLL_WAIT_TRIES) { + i++; + udelay(1); + } + + if (i == MAX_DPLL_WAIT_TRIES) { + pr_err("clock: %s failed transition to '%s'\n", + clk_name, (state) ? "locked" : "bypassed"); + } else { + pr_debug("clock: %s transition to '%s' in %d loops\n", + clk_name, (state) ? "locked" : "bypassed", i); + + ret = 0; + } + + return ret; +} + +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk_hw_omap *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = __clk_get_rate(clk->dpll_data->clk_ref) / n; + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + +/* + * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report + * readiness before returning. Will save and restore the DPLL's + * autoidle state across the enable, per the CDP code. If the DPLL + * locked successfully, return 0; if the DPLL did not lock in the time + * allotted, or DPLL3 was passed in, return -EINVAL. + */ +static int _omap3_noncore_dpll_lock(struct clk_hw_omap *clk) +{ + const struct dpll_data *dd; + u8 ai; + u8 state = 1; + int r = 0; + + pr_debug("clock: locking DPLL %s\n", __clk_get_name(clk->hw.clk)); + + dd = clk->dpll_data; + state <<= __ffs(dd->idlest_mask); + + /* Check if already locked */ + if ((ti_clk_ll_ops->clk_readl(dd->idlest_reg) & dd->idlest_mask) == + state) + goto done; + + ai = omap3_dpll_autoidle_read(clk); + + if (ai) + omap3_dpll_deny_idle(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOCKED); + + r = _omap3_wait_dpll_status(clk, 1); + + if (ai) + omap3_dpll_allow_idle(clk); + +done: + return r; +} + +/* + * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power bypass mode. In + * bypass mode, the DPLL's rate is set equal to its parent clock's + * rate. Waits for the DPLL to report readiness before returning. + * Will save and restore the DPLL's autoidle state across the enable, + * per the CDP code. If the DPLL entered bypass mode successfully, + * return 0; if the DPLL did not enter bypass in the time allotted, or + * DPLL3 was passed in, or the DPLL does not support low-power bypass, + * return -EINVAL. + */ +static int _omap3_noncore_dpll_bypass(struct clk_hw_omap *clk) +{ + int r; + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) + return -EINVAL; + + pr_debug("clock: configuring DPLL %s for low-power bypass\n", + __clk_get_name(clk->hw.clk)); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); + + r = _omap3_wait_dpll_status(clk, 0); + + if (ai) + omap3_dpll_allow_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_stop - instruct a DPLL to stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. Will save and + * restore the DPLL's autoidle state across the stop, per the CDP + * code. If DPLL3 was passed in, or the DPLL does not support + * low-power stop, return -EINVAL; otherwise, return 0. + */ +static int _omap3_noncore_dpll_stop(struct clk_hw_omap *clk) +{ + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) + return -EINVAL; + + pr_debug("clock: stopping DPLL %s\n", __clk_get_name(clk->hw.clk)); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); + + if (ai) + omap3_dpll_allow_idle(clk); + + return 0; +} + +/** + * _lookup_dco - Lookup DCO used by j-type DPLL + * @clk: pointer to a DPLL struct clk + * @dco: digital control oscillator selector + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * + * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" + * + * XXX This code is not needed for 3430/AM35xx; can it be optimized + * out in non-multi-OMAP builds for those chips? + */ +static void _lookup_dco(struct clk_hw_omap *clk, u8 *dco, u16 m, u8 n) +{ + unsigned long fint, clkinp; /* watch out for overflow */ + + clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk)); + fint = (clkinp / n) * m; + + if (fint < 1000000000) + *dco = 2; + else + *dco = 4; +} + +/** + * _lookup_sddiv - Calculate sigma delta divider for j-type DPLL + * @clk: pointer to a DPLL struct clk + * @sd_div: target sigma-delta divider + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * + * See 36xx TRM section 3.5.3.3.3.2 "Type B DPLL (Low-Jitter)" + * + * XXX This code is not needed for 3430/AM35xx; can it be optimized + * out in non-multi-OMAP builds for those chips? + */ +static void _lookup_sddiv(struct clk_hw_omap *clk, u8 *sd_div, u16 m, u8 n) +{ + unsigned long clkinp, sd; /* watch out for overflow */ + int mod1, mod2; + + clkinp = __clk_get_rate(__clk_get_parent(clk->hw.clk)); + + /* + * target sigma-delta to near 250MHz + * sd = ceil[(m/(n+1)) * (clkinp_MHz / 250)] + */ + clkinp /= 100000; /* shift from MHz to 10*Hz for 38.4 and 19.2 */ + mod1 = (clkinp * m) % (250 * n); + sd = (clkinp * m) / (250 * n); + mod2 = sd % 10; + sd /= 10; + + if (mod1 || mod2) + sd++; + *sd_div = sd; +} + +/* + * _omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the last M, N values calculated, and wait for + * the DPLL to lock. Returns -EINVAL upon error, or 0 upon success. + */ +static int omap3_noncore_dpll_program(struct clk_hw_omap *clk, u16 freqsel) +{ + struct dpll_data *dd = clk->dpll_data; + u8 dco, sd_div; + u32 v; + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + /* + * Set jitter correction. Jitter correction applicable for OMAP343X + * only since freqsel field is no longer present on other devices. + */ + if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) { + v = ti_clk_ll_ops->clk_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + ti_clk_ll_ops->clk_writel(v, dd->control_reg); + } + + /* Set DPLL multiplier, divider */ + v = ti_clk_ll_ops->clk_readl(dd->mult_div1_reg); + + /* Handle Duty Cycle Correction */ + if (dd->dcc_mask) { + if (dd->last_rounded_rate >= dd->dcc_rate) + v |= dd->dcc_mask; /* Enable DCC */ + else + v &= ~dd->dcc_mask; /* Disable DCC */ + } + + v &= ~(dd->mult_mask | dd->div1_mask); + v |= dd->last_rounded_m << __ffs(dd->mult_mask); + v |= (dd->last_rounded_n - 1) << __ffs(dd->div1_mask); + + /* Configure dco and sd_div for dplls that have these fields */ + if (dd->dco_mask) { + _lookup_dco(clk, &dco, dd->last_rounded_m, dd->last_rounded_n); + v &= ~(dd->dco_mask); + v |= dco << __ffs(dd->dco_mask); + } + if (dd->sddiv_mask) { + _lookup_sddiv(clk, &sd_div, dd->last_rounded_m, + dd->last_rounded_n); + v &= ~(dd->sddiv_mask); + v |= sd_div << __ffs(dd->sddiv_mask); + } + + ti_clk_ll_ops->clk_writel(v, dd->mult_div1_reg); + + /* Set 4X multiplier and low-power mode */ + if (dd->m4xen_mask || dd->lpmode_mask) { + v = ti_clk_ll_ops->clk_readl(dd->control_reg); + + if (dd->m4xen_mask) { + if (dd->last_rounded_m4xen) + v |= dd->m4xen_mask; + else + v &= ~dd->m4xen_mask; + } + + if (dd->lpmode_mask) { + if (dd->last_rounded_lpmode) + v |= dd->lpmode_mask; + else + v &= ~dd->lpmode_mask; + } + + ti_clk_ll_ops->clk_writel(v, dd->control_reg); + } + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/* Public functions */ + +/** + * omap3_dpll_recalc - recalculate DPLL rate + * @clk: DPLL struct clk + * + * Recalculate and propagate the DPLL rate. + */ +unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + + return omap2_get_dpll_rate(clk); +} + +/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ + +/** + * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. + * The choice of modes depends on the DPLL's programmed rate: if it is + * the same as the DPLL's parent clock, it will enter bypass; + * otherwise, it will enter lock. This code will wait for the DPLL to + * indicate readiness before returning, unless the DPLL takes too long + * to enter the target state. Intended to be used as the struct clk's + * enable function. If DPLL3 was passed in, or the DPLL does not + * support low-power stop, or if the DPLL took too long to enter + * bypass or lock, return -EINVAL; otherwise, return 0. + */ +int omap3_noncore_dpll_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + int r; + struct dpll_data *dd; + struct clk_hw *parent; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (clk->clkdm) { + r = ti_clk_ll_ops->clkdm_clk_enable(clk->clkdm, hw->clk); + if (r) { + WARN(1, + "%s: could not enable %s's clockdomain %s: %d\n", + __func__, __clk_get_name(hw->clk), + clk->clkdm_name, r); + return r; + } + } + + parent = __clk_get_hw(__clk_get_parent(hw->clk)); + + if (__clk_get_rate(hw->clk) == __clk_get_rate(dd->clk_bypass)) { + WARN_ON(parent != __clk_get_hw(dd->clk_bypass)); + r = _omap3_noncore_dpll_bypass(clk); + } else { + WARN_ON(parent != __clk_get_hw(dd->clk_ref)); + r = _omap3_noncore_dpll_lock(clk); + } + + return r; +} + +/** + * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. This function is + * intended for use in struct clkops. No return value. + */ +void omap3_noncore_dpll_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + + _omap3_noncore_dpll_stop(clk); + if (clk->clkdm) + ti_clk_ll_ops->clkdm_clk_disable(clk->clkdm, hw->clk); +} + +/* Non-CORE DPLL rate set code */ + +/** + * omap3_noncore_dpll_determine_rate - determine rate for a DPLL + * @hw: pointer to the clock to determine rate for + * @rate: target rate for the DPLL + * @best_parent_rate: pointer for returning best parent rate + * @best_parent_clk: pointer for returning best parent clock + * + * Determines which DPLL mode to use for reaching a desired target rate. + * Checks whether the DPLL shall be in bypass or locked mode, and if + * locked, calculates the M,N values for the DPLL via round-rate. + * Returns a positive clock rate with success, negative error value + * in failure. + */ +long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate, + unsigned long min_rate, + unsigned long max_rate, + unsigned long *best_parent_rate, + struct clk_hw **best_parent_clk) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_rate(dd->clk_bypass) == rate && + (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + *best_parent_clk = __clk_get_hw(dd->clk_bypass); + } else { + rate = omap2_dpll_round_rate(hw, rate, best_parent_rate); + *best_parent_clk = __clk_get_hw(dd->clk_ref); + } + + *best_parent_rate = rate; + + return rate; +} + +/** + * omap3_noncore_dpll_set_parent - set parent for a DPLL clock + * @hw: pointer to the clock to set parent for + * @index: parent index to select + * + * Sets parent for a DPLL clock. This sets the DPLL into bypass or + * locked mode. Returns 0 with success, negative error value otherwise. + */ +int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + int ret; + + if (!hw) + return -EINVAL; + + if (index) + ret = _omap3_noncore_dpll_bypass(clk); + else + ret = _omap3_noncore_dpll_lock(clk); + + return ret; +} + +/** + * omap3_noncore_dpll_set_rate - set rate for a DPLL clock + * @hw: pointer to the clock to set parent for + * @rate: target rate for the clock + * @parent_rate: rate of the parent clock + * + * Sets rate for a DPLL clock. First checks if the clock parent is + * reference clock (in bypass mode, the rate of the clock can't be + * changed) and proceeds with the rate change operation. Returns 0 + * with success, negative error value otherwise. + */ +int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *dd; + u16 freqsel = 0; + int ret; + + if (!hw || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (__clk_get_hw(__clk_get_parent(hw->clk)) != + __clk_get_hw(dd->clk_ref)) + return -EINVAL; + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + /* Freqsel is available only on OMAP343X devices */ + if (ti_clk_get_features()->flags & TI_CLK_DPLL_HAS_FREQSEL) { + freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); + WARN_ON(!freqsel); + } + + pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__, + __clk_get_name(hw->clk), rate); + + ret = omap3_noncore_dpll_program(clk, freqsel); + + return ret; +} + +/** + * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock + * @hw: pointer to the clock to set rate and parent for + * @rate: target rate for the DPLL + * @parent_rate: clock rate of the DPLL parent + * @index: new parent index for the DPLL, 0 - reference, 1 - bypass + * + * Sets rate and parent for a DPLL clock. If new parent is the bypass + * clock, only selects the parent. Otherwise proceeds with a rate + * change, as this will effectively also change the parent as the + * DPLL is put into locked mode. Returns 0 with success, negative error + * value otherwise. + */ +int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 index) +{ + int ret; + + if (!hw || !rate) + return -EINVAL; + + /* + * clk-ref at index[0], in which case we only need to set rate, + * the parent will be changed automatically with the lock sequence. + * With clk-bypass case we only need to change parent. + */ + if (index) + ret = omap3_noncore_dpll_set_parent(hw, index); + else + ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate); + + return ret; +} + +/* DPLL autoidle read/set code */ + +/** + * omap3_dpll_autoidle_read - read a DPLL's autoidle bits + * @clk: struct clk * of the DPLL to read + * + * Return the DPLL's autoidle bits, shifted down to bit 0. Returns + * -EINVAL if passed a null pointer or if the struct clk does not + * appear to refer to a DPLL. + */ +static u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return -EINVAL; + + dd = clk->dpll_data; + + if (!dd->autoidle_reg) + return -EINVAL; + + v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg); + v &= dd->autoidle_mask; + v >>= __ffs(dd->autoidle_mask); + + return v; +} + +/** + * omap3_dpll_allow_idle - enable DPLL autoidle bits + * @clk: struct clk * of the DPLL to operate on + * + * Enable DPLL automatic idle control. This automatic idle mode + * switching takes effect only when the DPLL is locked, at least on + * OMAP3430. The DPLL will enter low-power stop when its downstream + * clocks are gated. No return value. + */ +static void omap3_dpll_allow_idle(struct clk_hw_omap *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + if (!dd->autoidle_reg) + return; + + /* + * REVISIT: CORE DPLL can optionally enter low-power bypass + * by writing 0x5 instead of 0x1. Add some mechanism to + * optionally enter this mode. + */ + v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); + ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg); +} + +/** + * omap3_dpll_deny_idle - prevent DPLL from automatically idling + * @clk: struct clk * of the DPLL to operate on + * + * Disable DPLL automatic idle control. No return value. + */ +static void omap3_dpll_deny_idle(struct clk_hw_omap *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + if (!dd->autoidle_reg) + return; + + v = ti_clk_ll_ops->clk_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); + ti_clk_ll_ops->clk_writel(v, dd->autoidle_reg); +} + +/* Clock control for DPLL outputs */ + +/* Find the parent DPLL for the given clkoutx2 clock */ +static struct clk_hw_omap *omap3_find_clkoutx2_dpll(struct clk_hw *hw) +{ + struct clk_hw_omap *pclk = NULL; + struct clk *parent; + + /* Walk up the parents of clk, looking for a DPLL */ + do { + do { + parent = __clk_get_parent(hw->clk); + hw = __clk_get_hw(parent); + } while (hw && (__clk_get_flags(hw->clk) & CLK_IS_BASIC)); + if (!hw) + break; + pclk = to_clk_hw_omap(hw); + } while (pclk && !pclk->dpll_data); + + /* clk does not have a DPLL as a parent? error in the clock data */ + if (!pclk) { + WARN_ON(1); + return NULL; + } + + return pclk; +} + +/** + * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate + * @clk: DPLL output struct clk + * + * Using parent clock DPLL data, look up DPLL state. If locked, set our + * rate to the dpll_clk * 2; otherwise, just use dpll_clk. + */ +unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + const struct dpll_data *dd; + unsigned long rate; + u32 v; + struct clk_hw_omap *pclk = NULL; + + if (!parent_rate) + return 0; + + pclk = omap3_find_clkoutx2_dpll(hw); + + if (!pclk) + return 0; + + dd = pclk->dpll_data; + + WARN_ON(!dd->enable_mask); + + v = ti_clk_ll_ops->clk_readl(dd->control_reg) & dd->enable_mask; + v >>= __ffs(dd->enable_mask); + if ((v != OMAP3XXX_EN_DPLL_LOCKED) || (dd->flags & DPLL_J_TYPE)) + rate = parent_rate; + else + rate = parent_rate * 2; + return rate; +} + +/* OMAP3/4 non-CORE DPLL clkops */ +const struct clk_hw_omap_ops clkhwops_omap3_dpll = { + .allow_idle = omap3_dpll_allow_idle, + .deny_idle = omap3_dpll_deny_idle, +}; + +/** + * omap3_dpll4_set_rate - set rate for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * + * Check if the current SoC supports the per-dpll reprogram operation + * or not, and then do the rate change if supported. Returns -EINVAL + * if not supported, 0 for success, and potential error codes from the + * clock rate change. + */ +int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + /* + * According to the 12-5 CDP code from TI, "Limitation 2.5" + * on 3430ES1 prevents us from changing DPLL multipliers or dividers + * on DPLL4. + */ + if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) { + pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + + return omap3_noncore_dpll_set_rate(hw, rate, parent_rate); +} + +/** + * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll + * @hw: clock to change + * @rate: target rate for clock + * @parent_rate: rate of the parent clock + * @index: parent index, 0 - reference clock, 1 - bypass clock + * + * Check if the current SoC support the per-dpll reprogram operation + * or not, and then do the rate + parent change if supported. Returns + * -EINVAL if not supported, 0 for success, and potential error codes + * from the clock rate change. + */ +int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate, u8 index) +{ + if (ti_clk_get_features()->flags & TI_CLK_DPLL4_DENY_REPROGRAM) { + pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + + return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate, + index); +} |