clk: at91: add PMC pll clocks

This patch adds new at91 pll clock implementation using common clk framework.

The pll clock layout describe the PLLX register layout.
There are four pll clock layouts:
- at91rm9200
- at91sam9g20
- at91sam9g45
- sama5d3

PLL clocks are given characteristics:
- min/max clock source rate
- ranges of valid clock output rates
- values to set in out and icpll fields for each supported output range

These characteristics are checked during rate change to avoid
over/underclocking.

These characteristics are described in atmel's SoC datasheet in
"Electrical Characteristics" paragraph.

Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 21 insertions, 0 deletions

diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
index 3d35b7313868..5af3f2fbf45e 100644
--- a/drivers/clk/at91/pmc.c
+++ b/drivers/clk/at91/pmc.c
@@ -234,6 +234,27 @@ static const struct of_device_id pmc_clk_ids[] __initdata = {
 		.compatible = "atmel,at91rm9200-clk-main",
 		.data = of_at91rm9200_clk_main_setup,
 	},
+	/* PLL clocks */
+	{
+		.compatible = "atmel,at91rm9200-clk-pll",
+		.data = of_at91rm9200_clk_pll_setup,
+	},
+	{
+		.compatible = "atmel,at91sam9g45-clk-pll",
+		.data = of_at91sam9g45_clk_pll_setup,
+	},
+	{
+		.compatible = "atmel,at91sam9g20-clk-pllb",
+		.data = of_at91sam9g20_clk_pllb_setup,
+	},
+	{
+		.compatible = "atmel,sama5d3-clk-pll",
+		.data = of_sama5d3_clk_pll_setup,
+	},
+	{
+		.compatible = "atmel,at91sam9x5-clk-plldiv",
+		.data = of_at91sam9x5_clk_plldiv_setup,
+	},
 	{ /*sentinel*/ }
 };