Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/usb/input/hid.h

1 files changed, 0 insertions, 1349 deletions

diff --git a/drivers/char/ftape/lowlevel/fdc-io.c b/drivers/char/ftape/lowlevel/fdc-io.c
deleted file mode 100644
index bbcf918f056f..000000000000
--- a/drivers/char/ftape/lowlevel/fdc-io.c
+++ /dev/null
@@ -1,1349 +0,0 @@
-/*
- * Copyright (C) 1993-1996 Bas Laarhoven,
- *           (C) 1996-1997 Claus-Justus Heine.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2, or (at your option)
- any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; see the file COPYING.  If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
- *
- * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-io.c,v $
- * $Revision: 1.7.4.2 $
- * $Date: 1997/11/16 14:48:17 $
- *
- *      This file contains the low-level floppy disk interface code
- *      for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for
- *      Linux.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/irq.h>
-
-#include <linux/ftape.h>
-#include <linux/qic117.h>
-#include "../lowlevel/ftape-tracing.h"
-#include "../lowlevel/fdc-io.h"
-#include "../lowlevel/fdc-isr.h"
-#include "../lowlevel/ftape-io.h"
-#include "../lowlevel/ftape-rw.h"
-#include "../lowlevel/ftape-ctl.h"
-#include "../lowlevel/ftape-calibr.h"
-#include "../lowlevel/fc-10.h"
-
-/*      Global vars.
- */
-static int ftape_motor;
-volatile int ftape_current_cylinder = -1;
-volatile fdc_mode_enum fdc_mode = fdc_idle;
-fdc_config_info fdc;
-DECLARE_WAIT_QUEUE_HEAD(ftape_wait_intr);
-
-unsigned int ft_fdc_base       = CONFIG_FT_FDC_BASE;
-unsigned int ft_fdc_irq        = CONFIG_FT_FDC_IRQ;
-unsigned int ft_fdc_dma        = CONFIG_FT_FDC_DMA;
-unsigned int ft_fdc_threshold  = CONFIG_FT_FDC_THR;  /* bytes */
-unsigned int ft_fdc_rate_limit = CONFIG_FT_FDC_MAX_RATE; /* bits/sec */
-int ft_probe_fc10        = CONFIG_FT_PROBE_FC10;
-int ft_mach2             = CONFIG_FT_MACH2;
-
-/*      Local vars.
- */
-static spinlock_t fdc_io_lock; 
-static unsigned int fdc_calibr_count;
-static unsigned int fdc_calibr_time;
-static int fdc_status;
-volatile __u8 fdc_head;		/* FDC head from sector id */
-volatile __u8 fdc_cyl;		/* FDC track from sector id */
-volatile __u8 fdc_sect;		/* FDC sector from sector id */
-static int fdc_data_rate = 500;	/* data rate (Kbps) */
-static int fdc_rate_code;	/* data rate code (0 == 500 Kbps) */
-static int fdc_seek_rate = 2;	/* step rate (msec) */
-static void (*do_ftape) (void);
-static int fdc_fifo_state;	/* original fifo setting - fifo enabled */
-static int fdc_fifo_thr;	/* original fifo setting - threshold */
-static int fdc_lock_state;	/* original lock setting - locked */
-static int fdc_fifo_locked;	/* has fifo && lock set ? */
-static __u8 fdc_precomp;	/* default precomp. value (nsec) */
-static __u8 fdc_prec_code;	/* fdc precomp. select code */
-
-static char ftape_id[] = "ftape";  /* used by request irq and free irq */
-
-static int fdc_set_seek_rate(int seek_rate);
-
-void fdc_catch_stray_interrupts(int count)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&fdc_io_lock, flags);
-	if (count == 0) {
-		ft_expected_stray_interrupts = 0;
-	} else {
-		ft_expected_stray_interrupts += count;
-	}
-	spin_unlock_irqrestore(&fdc_io_lock, flags);
-}
-
-/*  Wait during a timeout period for a given FDC status.
- *  If usecs == 0 then just test status, else wait at least for usecs.
- *  Returns -ETIME on timeout. Function must be calibrated first !
- */
-static int fdc_wait(unsigned int usecs, __u8 mask, __u8 state)
-{
-	int count_1 = (fdc_calibr_count * usecs +
-                       fdc_calibr_count - 1) / fdc_calibr_time;
-
-	do {
-		fdc_status = inb_p(fdc.msr);
-		if ((fdc_status & mask) == state) {
-			return 0;
-		}
-	} while (count_1-- >= 0);
-	return -ETIME;
-}
-
-int fdc_ready_wait(unsigned int usecs)
-{
-	return fdc_wait(usecs, FDC_DATA_READY | FDC_BUSY, FDC_DATA_READY);
-}
-
-/* Why can't we just use udelay()?
- */
-static void fdc_usec_wait(unsigned int usecs)
-{
-	fdc_wait(usecs, 0, 1);	/* will always timeout ! */
-}
-
-static int fdc_ready_out_wait(unsigned int usecs)
-{
-	fdc_usec_wait(FT_RQM_DELAY);	/* wait for valid RQM status */
-	return fdc_wait(usecs, FDC_DATA_OUT_READY, FDC_DATA_OUT_READY);
-}
-
-void fdc_wait_calibrate(void)
-{
-	ftape_calibrate("fdc_wait",
-			fdc_usec_wait, &fdc_calibr_count, &fdc_calibr_time); 
-}
-
-/*  Wait for a (short) while for the FDC to become ready
- *  and transfer the next command byte.
- *  Return -ETIME on timeout on getting ready (depends on hardware!).
- */
-static int fdc_write(const __u8 data)
-{
-	fdc_usec_wait(FT_RQM_DELAY);	/* wait for valid RQM status */
-	if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_IN_READY) < 0) {
-		return -ETIME;
-	} else {
-		outb(data, fdc.fifo);
-		return 0;
-	}
-}
-
-/*  Wait for a (short) while for the FDC to become ready
- *  and transfer the next result byte.
- *  Return -ETIME if timeout on getting ready (depends on hardware!).
- */
-static int fdc_read(__u8 * data)
-{
-	fdc_usec_wait(FT_RQM_DELAY);	/* wait for valid RQM status */
-	if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_OUT_READY) < 0) {
-		return -ETIME;
-	} else {
-		*data = inb(fdc.fifo);
-		return 0;
-	}
-}
-
-/*  Output a cmd_len long command string to the FDC.
- *  The FDC should be ready to receive a new command or
- *  an error (EBUSY or ETIME) will occur.
- */
-int fdc_command(const __u8 * cmd_data, int cmd_len)
-{
-	int result = 0;
-	unsigned long flags;
-	int count = cmd_len;
-	int retry = 0;
-#ifdef TESTING
-	static unsigned int last_time;
-	unsigned int time;
-#endif
-	TRACE_FUN(ft_t_any);
-
-	fdc_usec_wait(FT_RQM_DELAY);	/* wait for valid RQM status */
-	spin_lock_irqsave(&fdc_io_lock, flags);
-	if (!in_interrupt())
-		/* Yes, I know, too much comments inside this function
-		 * ...
-		 * 
-		 * Yet another bug in the original driver. All that
-		 * havoc is caused by the fact that the isr() sends
-		 * itself a command to the floppy tape driver (pause,
-		 * micro step pause).  Now, the problem is that
-		 * commands are transmitted via the fdc_seek
-		 * command. But: the fdc performs seeks in the
-		 * background i.e. it doesn't signal busy while
-		 * sending the step pulses to the drive. Therefore the
-		 * non-interrupt level driver has no chance to tell
-		 * whether the isr() just has issued a seek. Therefore
-		 * we HAVE TO have a look at the ft_hide_interrupt
-		 * flag: it signals the non-interrupt level part of
-		 * the driver that it has to wait for the fdc until it
-		 * has completet seeking.
-		 *
-		 * THIS WAS PRESUMABLY THE REASON FOR ALL THAT
-		 * "fdc_read timeout" errors, I HOPE :-)
-		 */
-		if (ft_hide_interrupt) {
-			restore_flags(flags);
-			TRACE(ft_t_info,
-			      "Waiting for the isr() completing fdc_seek()");
-			if (fdc_interrupt_wait(2 * FT_SECOND) < 0) {
-				TRACE(ft_t_warn,
-		      "Warning: timeout waiting for isr() seek to complete");
-			}
-			if (ft_hide_interrupt || !ft_seek_completed) {
-				/* There cannot be another
-				 * interrupt. The isr() only stops
-				 * the tape and the next interrupt
-				 * won't come until we have send our
-				 * command to the drive.
-				 */
-				TRACE_ABORT(-EIO, ft_t_bug,
-					    "BUG? isr() is still seeking?\n"
-					    KERN_INFO "hide: %d\n"
-					    KERN_INFO "seek: %d",
-					    ft_hide_interrupt,
-					    ft_seek_completed);
-
-			}
-			fdc_usec_wait(FT_RQM_DELAY);	/* wait for valid RQM status */
-			spin_lock_irqsave(&fdc_io_lock, flags);
-		}
-	fdc_status = inb(fdc.msr);
-	if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_IN_READY) {
-		spin_unlock_irqrestore(&fdc_io_lock, flags);
-		TRACE_ABORT(-EBUSY, ft_t_err, "fdc not ready");
-	} 
-	fdc_mode = *cmd_data;	/* used by isr */
-#ifdef TESTING
-	if (fdc_mode == FDC_SEEK) {
-		time = ftape_timediff(last_time, ftape_timestamp());
-		if (time < 6000) {
-	TRACE(ft_t_bug,"Warning: short timeout between seek commands: %d",
-	      time);
-		}
-	}
-#endif
-	if (!in_interrupt()) {
-		/* shouldn't be cleared if called from isr
-		 */
-		ft_interrupt_seen = 0;
-	}
-	while (count) {
-		result = fdc_write(*cmd_data);
-		if (result < 0) {
-			TRACE(ft_t_fdc_dma,
-			      "fdc_mode = %02x, status = %02x at index %d",
-			      (int) fdc_mode, (int) fdc_status,
-			      cmd_len - count);
-			if (++retry <= 3) {
-				TRACE(ft_t_warn, "fdc_write timeout, retry");
-			} else {
-				TRACE(ft_t_err, "fdc_write timeout, fatal");
-				/* recover ??? */
-				break;
-			}
-		} else {
-			--count;
-			++cmd_data;
-		}
-        }
-#ifdef TESTING
-	if (fdc_mode == FDC_SEEK) {
-		last_time = ftape_timestamp();
-	}
-#endif
-	spin_unlock_irqrestore(&fdc_io_lock, flags);
-	TRACE_EXIT result;
-}
-
-/*  Input a res_len long result string from the FDC.
- *  The FDC should be ready to send the result or an error
- *  (EBUSY or ETIME) will occur.
- */
-int fdc_result(__u8 * res_data, int res_len)
-{
-	int result = 0;
-	unsigned long flags;
-	int count = res_len;
-	int retry = 0;
-	TRACE_FUN(ft_t_any);
-
-	spin_lock_irqsave(&fdc_io_lock, flags);
-	fdc_status = inb(fdc.msr);
-	if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_OUT_READY) {
-		TRACE(ft_t_err, "fdc not ready");
-		result = -EBUSY;
-	} else while (count) {
-		if (!(fdc_status & FDC_BUSY)) {
-			spin_unlock_irqrestore(&fdc_io_lock, flags);
-			TRACE_ABORT(-EIO, ft_t_err, "premature end of result phase");
-		}
-		result = fdc_read(res_data);
-		if (result < 0) {
-			TRACE(ft_t_fdc_dma,
-			      "fdc_mode = %02x, status = %02x at index %d",
-			      (int) fdc_mode,
-			      (int) fdc_status,
-			      res_len - count);
-			if (++retry <= 3) {
-				TRACE(ft_t_warn, "fdc_read timeout, retry");
-			} else {
-				TRACE(ft_t_err, "fdc_read timeout, fatal");
-				/* recover ??? */
-				break;
-				++retry;
-			}
-		} else {
-			--count;
-			++res_data;
-		}
-	}
-	spin_unlock_irqrestore(&fdc_io_lock, flags);
-	fdc_usec_wait(FT_RQM_DELAY);	/* allow FDC to negate BSY */
-	TRACE_EXIT result;
-}
-
-/*      Handle command and result phases for
- *      commands without data phase.
- */
-static int fdc_issue_command(const __u8 * out_data, int out_count,
-		      __u8 * in_data, int in_count)
-{
-	TRACE_FUN(ft_t_any);
-
-	if (out_count > 0) {
-		TRACE_CATCH(fdc_command(out_data, out_count),);
-	}
-	/* will take 24 - 30 usec for fdc_sense_drive_status and
-	 * fdc_sense_interrupt_status commands.
-	 *    35 fails sometimes (5/9/93 SJL)
-	 * On a loaded system it incidentally takes longer than
-	 * this for the fdc to get ready ! ?????? WHY ??????
-	 * So until we know what's going on use a very long timeout.
-	 */
-	TRACE_CATCH(fdc_ready_out_wait(500 /* usec */),);
-	if (in_count > 0) {
-		TRACE_CATCH(fdc_result(in_data, in_count),
-			    TRACE(ft_t_err, "result phase aborted"));
-	}
-	TRACE_EXIT 0;
-}
-
-/*      Wait for FDC interrupt with timeout (in milliseconds).
- *      Signals are blocked so the wait will not be aborted.
- *      Note: interrupts must be enabled ! (23/05/93 SJL)
- */
-int fdc_interrupt_wait(unsigned int time)
-{
-	DECLARE_WAITQUEUE(wait,current);
-	sigset_t old_sigmask;	
-	static int resetting;
-	long timeout;
-
-	TRACE_FUN(ft_t_fdc_dma);
-
- 	if (waitqueue_active(&ftape_wait_intr)) {
-		TRACE_ABORT(-EIO, ft_t_err, "error: nested call");
-	}
-	/* timeout time will be up to USPT microseconds too long ! */
-	timeout = (1000 * time + FT_USPT - 1) / FT_USPT;
-
-	spin_lock_irq(&current->sighand->siglock);
-	old_sigmask = current->blocked;
-	sigfillset(&current->blocked);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	set_current_state(TASK_INTERRUPTIBLE);
-	add_wait_queue(&ftape_wait_intr, &wait);
-	while (!ft_interrupt_seen && timeout)
-		timeout = schedule_timeout_interruptible(timeout);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = old_sigmask;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-	
-	remove_wait_queue(&ftape_wait_intr, &wait);
-	/*  the following IS necessary. True: as well
-	 *  wake_up_interruptible() as the schedule() set TASK_RUNNING
-	 *  when they wakeup a task, BUT: it may very well be that
-	 *  ft_interrupt_seen is already set to 1 when we enter here
-	 *  in which case schedule() gets never called, and
-	 *  TASK_RUNNING never set. This has the funny effect that we
-	 *  execute all the code until we leave kernel space, but then
-	 *  the task is stopped (a task CANNOT be preempted while in
-	 *  kernel mode. Sending a pair of SIGSTOP/SIGCONT to the
-	 *  tasks wakes it up again. Funny! :-)
-	 */
-	current->state = TASK_RUNNING; 
-	if (ft_interrupt_seen) { /* woken up by interrupt */
-		ft_interrupt_seen = 0;
-		TRACE_EXIT 0;
-	}
-	/*  Original comment:
-	 *  In first instance, next statement seems unnecessary since
-	 *  it will be cleared in fdc_command. However, a small part of
-	 *  the software seems to rely on this being cleared here
-	 *  (ftape_close might fail) so stick to it until things get fixed !
-	 */
-	/*  My deeply sought of knowledge:
-	 *  Behold NO! It is obvious. fdc_reset() doesn't call fdc_command()
-	 *  but nevertheless uses fdc_interrupt_wait(). OF COURSE this needs to
-	 *  be reset here.
-	 */
-	ft_interrupt_seen = 0;	/* clear for next call */
-	if (!resetting) {
-		resetting = 1;	/* break infinite recursion if reset fails */
-		TRACE(ft_t_any, "cleanup reset");
-		fdc_reset();
-		resetting = 0;
-	}
-	TRACE_EXIT (signal_pending(current)) ? -EINTR : -ETIME;
-}
-
-/*      Start/stop drive motor. Enable DMA mode.
- */
-void fdc_motor(int motor)
-{
-	int unit = ft_drive_sel;
-	int data = unit | FDC_RESET_NOT | FDC_DMA_MODE;
-	TRACE_FUN(ft_t_any);
-
-	ftape_motor = motor;
-	if (ftape_motor) {
-		data |= FDC_MOTOR_0 << unit;
-		TRACE(ft_t_noise, "turning motor %d on", unit);
-	} else {
-		TRACE(ft_t_noise, "turning motor %d off", unit);
-	}
-	if (ft_mach2) {
-		outb_p(data, fdc.dor2);
-	} else {
-		outb_p(data, fdc.dor);
-	}
-	ftape_sleep(10 * FT_MILLISECOND);
-	TRACE_EXIT;
-}
-
-static void fdc_update_dsr(void)
-{
-	TRACE_FUN(ft_t_any);
-
-	TRACE(ft_t_flow, "rate = %d Kbps, precomp = %d ns",
-	      fdc_data_rate, fdc_precomp);
-	if (fdc.type >= i82077) {
-		outb_p((fdc_rate_code & 0x03) | fdc_prec_code, fdc.dsr);
-	} else {
-		outb_p(fdc_rate_code & 0x03, fdc.ccr);
-	}
-	TRACE_EXIT;
-}
-
-void fdc_set_write_precomp(int precomp)
-{
-	TRACE_FUN(ft_t_any);
-
-	TRACE(ft_t_noise, "New precomp: %d nsec", precomp);
-	fdc_precomp = precomp;
-	/*  write precompensation can be set in multiples of 41.67 nsec.
-	 *  round the parameter to the nearest multiple and convert it
-	 *  into a fdc setting. Note that 0 means default to the fdc,
-	 *  7 is used instead of that.
-	 */
-	fdc_prec_code = ((fdc_precomp + 21) / 42) << 2;
-	if (fdc_prec_code == 0 || fdc_prec_code > (6 << 2)) {
-		fdc_prec_code = 7 << 2;
-	}
-	fdc_update_dsr();
-	TRACE_EXIT;
-}
-
-/*  Reprogram the 82078 registers to use Data Rate Table 1 on all drives.
- */
-static void fdc_set_drive_specs(void)
-{
-	__u8 cmd[] = { FDC_DRIVE_SPEC, 0x00, 0x00, 0x00, 0x00, 0xc0};
-	int result;
-	TRACE_FUN(ft_t_any);
-
-	TRACE(ft_t_flow, "Setting of drive specs called");
-	if (fdc.type >= i82078_1) {
-		cmd[1] = (0 << 5) | (2 << 2);
-		cmd[2] = (1 << 5) | (2 << 2);
-		cmd[3] = (2 << 5) | (2 << 2);
-		cmd[4] = (3 << 5) | (2 << 2);
-		result = fdc_command(cmd, NR_ITEMS(cmd));
-		if (result < 0) {
-			TRACE(ft_t_err, "Setting of drive specs failed");
-		}
-	}
-	TRACE_EXIT;
-}
-
-/* Select clock for fdc, must correspond with tape drive setting !
- * This also influences the fdc timing so we must adjust some values.
- */
-int fdc_set_data_rate(int rate)
-{
-	int bad_rate = 0;
-	TRACE_FUN(ft_t_any);
-
-	/* Select clock for fdc, must correspond with tape drive setting !
-	 * This also influences the fdc timing so we must adjust some values.
-	 */
-	TRACE(ft_t_fdc_dma, "new rate = %d", rate);
-	switch (rate) {
-	case 250:
-		fdc_rate_code = fdc_data_rate_250;
-		break;
-	case 500:
-		fdc_rate_code = fdc_data_rate_500;
-		break;
-	case 1000:
-		if (fdc.type < i82077) {
-			bad_rate = 1;
-                } else {
-			fdc_rate_code = fdc_data_rate_1000;
-		}
-		break;
-	case 2000:
-		if (fdc.type < i82078_1) {
-			bad_rate = 1;
-                } else {
-			fdc_rate_code = fdc_data_rate_2000;
-		}
-		break;
-	default:
-		bad_rate = 1;
-        }
-	if (bad_rate) {
-		TRACE_ABORT(-EIO,
-			    ft_t_fdc_dma, "%d is not a valid data rate", rate);
-	}
-	fdc_data_rate = rate;
-	fdc_update_dsr();
-	fdc_set_seek_rate(fdc_seek_rate);  /* clock changed! */
-	ftape_udelay(1000);
-	TRACE_EXIT 0;
-}
-
-/*  keep the unit select if keep_select is != 0,
- */
-static void fdc_dor_reset(int keep_select)
-{
-	__u8 fdc_ctl = ft_drive_sel;
-
-	if (keep_select != 0) {
-		fdc_ctl |= FDC_DMA_MODE;
-		if (ftape_motor) {
-			fdc_ctl |= FDC_MOTOR_0 << ft_drive_sel;
-		}
-	}
-	ftape_udelay(10); /* ??? but seems to be necessary */
-	if (ft_mach2) {
-		outb_p(fdc_ctl & 0x0f, fdc.dor);
-		outb_p(fdc_ctl, fdc.dor2);
-	} else {
-		outb_p(fdc_ctl, fdc.dor);
-	}
-	fdc_usec_wait(10); /* delay >= 14 fdc clocks */
-	if (keep_select == 0) {
-		fdc_ctl = 0;
-	}
-	fdc_ctl |= FDC_RESET_NOT;
-	if (ft_mach2) {
-		outb_p(fdc_ctl & 0x0f, fdc.dor);
-		outb_p(fdc_ctl, fdc.dor2);
-	} else {
-		outb_p(fdc_ctl, fdc.dor);
-	}
-}
-
-/*      Reset the floppy disk controller. Leave the ftape_unit selected.
- */
-void fdc_reset(void)
-{
-	int st0;
-	int i;
-	int dummy;
-	unsigned long flags;
-	TRACE_FUN(ft_t_any);
-
-	spin_lock_irqsave(&fdc_io_lock, flags);
-
-	fdc_dor_reset(1); /* keep unit selected */
-
-	fdc_mode = fdc_idle;
-
-	/*  maybe the spin_lock_irq* pair is not necessary, BUT:
-	 *  the following line MUST be here. Otherwise fdc_interrupt_wait()
-	 *  won't wait. Note that fdc_reset() is called from 
-	 *  ftape_dumb_stop() when the fdc is busy transferring data. In this
-	 *  case fdc_isr() MOST PROBABLY sets ft_interrupt_seen, and tries
-	 *  to get the result bytes from the fdc etc. CLASH.
-	 */
-	ft_interrupt_seen = 0;
-	
-	/*  Program data rate
-	 */
-	fdc_update_dsr();               /* restore data rate and precomp */
-
-	spin_unlock_irqrestore(&fdc_io_lock, flags);
-
-        /*
-         *	Wait for first polling cycle to complete
-	 */
-	if (fdc_interrupt_wait(1 * FT_SECOND) < 0) {
-		TRACE(ft_t_err, "no drive polling interrupt!");
-	} else {	/* clear all disk-changed statuses */
-		for (i = 0; i < 4; ++i) {
-			if(fdc_sense_interrupt_status(&st0, &dummy) != 0) {
-				TRACE(ft_t_err, "sense failed for %d", i);
-			}
-			if (i == ft_drive_sel) {
-				ftape_current_cylinder = dummy;
-			}
-		}
-		TRACE(ft_t_noise, "drive polling completed");
-	}
-	/*
-         *	SPECIFY COMMAND
-	 */
-	fdc_set_seek_rate(fdc_seek_rate);
-	/*
-	 *	DRIVE SPECIFICATION COMMAND (if fdc type known)
-	 */
-	if (fdc.type >= i82078_1) {
-		fdc_set_drive_specs();
-	}
-	TRACE_EXIT;
-}
-
-#if !defined(CLK_48MHZ)
-# define CLK_48MHZ 1
-#endif
-
-/*  When we're done, put the fdc into reset mode so that the regular
- *  floppy disk driver will figure out that something is wrong and
- *  initialize the controller the way it wants.
- */
-void fdc_disable(void)
-{
-	__u8 cmd1[] = {FDC_CONFIGURE, 0x00, 0x00, 0x00};
-	__u8 cmd2[] = {FDC_LOCK};
-	__u8 cmd3[] = {FDC_UNLOCK};
-	__u8 stat[1];
-	TRACE_FUN(ft_t_flow);
-
-	if (!fdc_fifo_locked) {
-		fdc_reset();
-		TRACE_EXIT;
-	}
-	if (fdc_issue_command(cmd3, 1, stat, 1) < 0 || stat[0] != 0x00) {
-		fdc_dor_reset(0);
-		TRACE_ABORT(/**/, ft_t_bug, 
-		"couldn't unlock fifo, configuration remains changed");
-	}
-	fdc_fifo_locked = 0;
-	if (CLK_48MHZ && fdc.type >= i82078) {
-		cmd1[0] |= FDC_CLK48_BIT;
-	}
-	cmd1[2] = ((fdc_fifo_state) ? 0 : 0x20) + (fdc_fifo_thr - 1);
-	if (fdc_command(cmd1, NR_ITEMS(cmd1)) < 0) {
-		fdc_dor_reset(0);
-		TRACE_ABORT(/**/, ft_t_bug,
-		"couldn't reconfigure fifo to old state");
-	}
-	if (fdc_lock_state &&
-	    fdc_issue_command(cmd2, 1, stat, 1) < 0) {
-		fdc_dor_reset(0);
-		TRACE_ABORT(/**/, ft_t_bug, "couldn't lock old state again");
-	}
-	TRACE(ft_t_noise, "fifo restored: %sabled, thr. %d, %slocked",
-	      fdc_fifo_state ? "en" : "dis",
-	      fdc_fifo_thr, (fdc_lock_state) ? "" : "not ");
-	fdc_dor_reset(0);
-	TRACE_EXIT;
-}
-
-/*      Specify FDC seek-rate (milliseconds)
- */
-static int fdc_set_seek_rate(int seek_rate)
-{
-	/* set step rate, dma mode, and minimal head load and unload times
-	 */
-	__u8 in[3] = { FDC_SPECIFY, 1, (1 << 1)};
- 
-	fdc_seek_rate = seek_rate;
-	in[1] |= (16 - (fdc_data_rate * fdc_seek_rate) / 500) << 4;
-
-	return fdc_command(in, 3);
-}
-
-/*      Sense drive status: get unit's drive status (ST3)
- */
-int fdc_sense_drive_status(int *st3)
-{
-	__u8 out[2];
-	__u8 in[1];
-	TRACE_FUN(ft_t_any);
-
-	out[0] = FDC_SENSED;
-	out[1] = ft_drive_sel;
-	TRACE_CATCH(fdc_issue_command(out, 2, in, 1),);
-	*st3 = in[0];
-	TRACE_EXIT 0;
-}
-
-/*      Sense Interrupt Status command:
- *      should be issued at the end of each seek.
- *      get ST0 and current cylinder.
- */
-int fdc_sense_interrupt_status(int *st0, int *current_cylinder)
-{
-	__u8 out[1];
-	__u8 in[2];
-	TRACE_FUN(ft_t_any);
-
-	out[0] = FDC_SENSEI;
-	TRACE_CATCH(fdc_issue_command(out, 1, in, 2),);
-	*st0 = in[0];
-	*current_cylinder = in[1];
-	TRACE_EXIT 0;
-}
-
-/*      step to track
- */
-int fdc_seek(int track)
-{
-	__u8 out[3];
-	int st0, pcn;
-#ifdef TESTING
-	unsigned int time;
-#endif
-	TRACE_FUN(ft_t_any);
-
-	out[0] = FDC_SEEK;
-	out[1] = ft_drive_sel;
-	out[2] = track;
-#ifdef TESTING
-	time = ftape_timestamp();
-#endif
-	/*  We really need this command to work !
-	 */
-	ft_seek_completed = 0;
-	TRACE_CATCH(fdc_command(out, 3),
-		    fdc_reset();
-		    TRACE(ft_t_noise, "destination was: %d, resetting FDC...",
-			  track));
-	/*    Handle interrupts until ft_seek_completed or timeout.
-	 */
-	for (;;) {
-		TRACE_CATCH(fdc_interrupt_wait(2 * FT_SECOND),);
-		if (ft_seek_completed) {
-			TRACE_CATCH(fdc_sense_interrupt_status(&st0, &pcn),);
-			if ((st0 & ST0_SEEK_END) == 0) {
-				TRACE_ABORT(-EIO, ft_t_err,
-				      "no seek-end after seek completion !??");
-			}
-			break;
-		}
-	}
-#ifdef TESTING
-	time = ftape_timediff(time, ftape_timestamp()) / abs(track - ftape_current_cylinder);
-	if ((time < 900 || time > 3100) && abs(track - ftape_current_cylinder) > 5) {
-		TRACE(ft_t_warn, "Wrong FDC STEP interval: %d usecs (%d)",
-                         time, track - ftape_current_cylinder);
-	}
-#endif
-	/*    Verify whether we issued the right tape command.
-	 */
-	/* Verify that we seek to the proper track. */
-	if (pcn != track) {
-		TRACE_ABORT(-EIO, ft_t_err, "bad seek..");
-	}
-	ftape_current_cylinder = track;
-	TRACE_EXIT 0;
-}
-
-static int perpend_mode; /* set if fdc is in perpendicular mode */
-
-static int perpend_off(void)
-{
- 	__u8 perpend[] = {FDC_PERPEND, 0x00};
-	TRACE_FUN(ft_t_any);
-	
-	if (perpend_mode) {
-		/* Turn off perpendicular mode */
-		perpend[1] = 0x80;
-		TRACE_CATCH(fdc_command(perpend, 2),
-			    TRACE(ft_t_err,"Perpendicular mode exit failed!"));
-		perpend_mode = 0;
-	}
-	TRACE_EXIT 0;
-}
-
-static int handle_perpend(int segment_id)
-{
- 	__u8 perpend[] = {FDC_PERPEND, 0x00};
-	TRACE_FUN(ft_t_any);
-
-	/* When writing QIC-3020 tapes, turn on perpendicular mode
-	 * if tape is moving in forward direction (even tracks).
-	 */
-	if (ft_qic_std == QIC_TAPE_QIC3020 &&
-	    ((segment_id / ft_segments_per_track) & 1) == 0) {
-/*  FIXME: some i82077 seem to support perpendicular mode as
- *  well. 
- */
-#if 0
-		if (fdc.type < i82077AA) {}
-#else
-		if (fdc.type < i82077 && ft_data_rate < 1000) {
-#endif
-			/*  fdc does not support perpendicular mode: complain 
-			 */
-			TRACE_ABORT(-EIO, ft_t_err,
-				    "Your FDC does not support QIC-3020.");
-		}
-		perpend[1] = 0x03 /* 0x83 + (0x4 << ft_drive_sel) */ ;
-		TRACE_CATCH(fdc_command(perpend, 2),
-			   TRACE(ft_t_err,"Perpendicular mode entry failed!"));
-		TRACE(ft_t_flow, "Perpendicular mode set");
-		perpend_mode = 1;
-		TRACE_EXIT 0;
-	}
-	TRACE_EXIT perpend_off();
-}
-
-static inline void fdc_setup_dma(char mode,
-				 volatile void *addr, unsigned int count)
-{
-	/* Program the DMA controller.
-	 */
-	disable_dma(fdc.dma);
-	clear_dma_ff(fdc.dma);
-	set_dma_mode(fdc.dma, mode);
-	set_dma_addr(fdc.dma, virt_to_bus((void*)addr));
-	set_dma_count(fdc.dma, count);
-	enable_dma(fdc.dma);
-}
-
-/*  Setup fdc and dma for formatting the next segment
- */
-int fdc_setup_formatting(buffer_struct * buff)
-{
-	unsigned long flags;
-	__u8 out[6] = {
-		FDC_FORMAT, 0x00, 3, 4 * FT_SECTORS_PER_SEGMENT, 0x00, 0x6b
-	};
-	TRACE_FUN(ft_t_any);
-	
-	TRACE_CATCH(handle_perpend(buff->segment_id),);
-	/* Program the DMA controller.
-	 */
-        TRACE(ft_t_fdc_dma,
-	      "phys. addr. = %lx", virt_to_bus((void*) buff->ptr));
-	spin_lock_irqsave(&fdc_io_lock, flags);
-	fdc_setup_dma(DMA_MODE_WRITE, buff->ptr, FT_SECTORS_PER_SEGMENT * 4);
-	/* Issue FDC command to start reading/writing.
-	 */
-	out[1] = ft_drive_sel;
-	out[4] = buff->gap3;
-	TRACE_CATCH(fdc_setup_error = fdc_command(out, sizeof(out)),
-		    restore_flags(flags); fdc_mode = fdc_idle);
-	spin_unlock_irqrestore(&fdc_io_lock, flags);
-	TRACE_EXIT 0;
-}
-
-
-/*      Setup Floppy Disk Controller and DMA to read or write the next cluster
- *      of good sectors from or to the current segment.
- */
-int fdc_setup_read_write(buffer_struct * buff, __u8 operation)
-{
-	unsigned long flags;
-	__u8 out[9];
-	int dma_mode;
-	TRACE_FUN(ft_t_any);
-
-	switch(operation) {
-	case FDC_VERIFY:
-		if (fdc.type < i82077) {
-			operation = FDC_READ;
-		}
-	case FDC_READ:
-	case FDC_READ_DELETED:
-		dma_mode = DMA_MODE_READ;
-		TRACE(ft_t_fdc_dma, "xfer %d sectors to 0x%p",
-		      buff->sector_count, buff->ptr);
-		TRACE_CATCH(perpend_off(),);
-		break;
-	case FDC_WRITE_DELETED:
-		TRACE(ft_t_noise, "deleting segment %d", buff->segment_id);
-	case FDC_WRITE:
-		dma_mode = DMA_MODE_WRITE;
-		/* When writing QIC-3020 tapes, turn on perpendicular mode
-		 * if tape is moving in forward direction (even tracks).
-		 */
-		TRACE_CATCH(handle_perpend(buff->segment_id),);
-		TRACE(ft_t_fdc_dma, "xfer %d sectors from 0x%p",
-		      buff->sector_count, buff->ptr);
-		break;
-	default:
-		TRACE_ABORT(-EIO,
-			    ft_t_bug, "bug: invalid operation parameter");
-	}
-	TRACE(ft_t_fdc_dma, "phys. addr. = %lx",virt_to_bus((void*)buff->ptr));
-	spin_lock_irqsave(&fdc_io_lock, flags);
-	if (operation != FDC_VERIFY) {
-		fdc_setup_dma(dma_mode, buff->ptr,
-			      FT_SECTOR_SIZE * buff->sector_count);
-	}
-	/* Issue FDC command to start reading/writing.
-	 */
-	out[0] = operation;
-	out[1] = ft_drive_sel;
-	out[2] = buff->cyl;
-	out[3] = buff->head;
-	out[4] = buff->sect + buff->sector_offset;
-	out[5] = 3;		/* Sector size of 1K. */
-	out[6] = out[4] + buff->sector_count - 1;	/* last sector */
-	out[7] = 109;		/* Gap length. */
-	out[8] = 0xff;		/* No limit to transfer size. */
-	TRACE(ft_t_fdc_dma, "C: 0x%02x, H: 0x%02x, R: 0x%02x, cnt: 0x%02x",
-		out[2], out[3], out[4], out[6] - out[4] + 1);
-	spin_unlock_irqrestore(&fdc_io_lock, flags);
-	TRACE_CATCH(fdc_setup_error = fdc_command(out, 9),fdc_mode = fdc_idle);
-	TRACE_EXIT 0;
-}
-
-int fdc_fifo_threshold(__u8 threshold,
-		       int *fifo_state, int *lock_state, int *fifo_thr)
-{
-	const __u8 cmd0[] = {FDC_DUMPREGS};
-	__u8 cmd1[] = {FDC_CONFIGURE, 0, (0x0f & (threshold - 1)), 0};
-	const __u8 cmd2[] = {FDC_LOCK};
-	const __u8 cmd3[] = {FDC_UNLOCK};
-	__u8 reg[10];
-	__u8 stat;
-	int i;
-	int result;
-	TRACE_FUN(ft_t_any);
-
-	if (CLK_48MHZ && fdc.type >= i82078) {
-		cmd1[0] |= FDC_CLK48_BIT;
-	}
-	/*  Dump fdc internal registers for examination
-	 */
-	TRACE_CATCH(fdc_command(cmd0, NR_ITEMS(cmd0)),
-		    TRACE(ft_t_warn, "dumpreg cmd failed, fifo unchanged"));
-	/*  Now read fdc internal registers from fifo
-	 */
-	for (i = 0; i < (int)NR_ITEMS(reg); ++i) {
-		fdc_read(&reg[i]);
-		TRACE(ft_t_fdc_dma, "Register %d = 0x%02x", i, reg[i]);
-	}
-	if (fifo_state && lock_state && fifo_thr) {
-		*fifo_state = (reg[8] & 0x20) == 0;
-		*lock_state = reg[7] & 0x80;
-		*fifo_thr = 1 + (reg[8] & 0x0f);
-	}
-	TRACE(ft_t_noise,
-	      "original fifo state: %sabled, threshold %d, %slocked",
-	      ((reg[8] & 0x20) == 0) ? "en" : "dis",
-	      1 + (reg[8] & 0x0f), (reg[7] & 0x80) ? "" : "not ");
-	/*  If fdc is already locked, unlock it first ! */
-	if (reg[7] & 0x80) {
-		fdc_ready_wait(100);
-		TRACE_CATCH(fdc_issue_command(cmd3, NR_ITEMS(cmd3), &stat, 1),
-			    TRACE(ft_t_bug, "FDC unlock command failed, "
-				  "configuration unchanged"));
-	}
-	fdc_fifo_locked = 0;
-	/*  Enable fifo and set threshold at xx bytes to allow a
-	 *  reasonably large latency and reduce number of dma bursts.
-	 */
-	fdc_ready_wait(100);
-	if ((result = fdc_command(cmd1, NR_ITEMS(cmd1))) < 0) {
-		TRACE(ft_t_bug, "configure cmd failed, fifo unchanged");
-	}
-	/*  Now lock configuration so reset will not change it
-	 */
-        if(fdc_issue_command(cmd2, NR_ITEMS(cmd2), &stat, 1) < 0 ||
-	   stat != 0x10) {
-		TRACE_ABORT(-EIO, ft_t_bug,
-			    "FDC lock command failed, stat = 0x%02x", stat);
-	}
-	fdc_fifo_locked = 1;
-	TRACE_EXIT result;
-}
-
-static int fdc_fifo_enable(void)
-{
-	TRACE_FUN(ft_t_any);
-
-	if (fdc_fifo_locked) {
-		TRACE_ABORT(0, ft_t_warn, "Fifo not enabled because locked");
-	}
-	TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */,
-				       &fdc_fifo_state,
-				       &fdc_lock_state,
-				       &fdc_fifo_thr),);
-	TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */,
-				       NULL, NULL, NULL),);
-	TRACE_EXIT 0;
-}
-
-/*   Determine fd controller type 
- */
-static __u8 fdc_save_state[2];
-
-static int fdc_probe(void)
-{
-	__u8 cmd[1];
-	__u8 stat[16]; /* must be able to hold dumpregs & save results */
-	int i;
-	TRACE_FUN(ft_t_any);
-
-	/*  Try to find out what kind of fd controller we have to deal with
-	 *  Scheme borrowed from floppy driver:
-	 *  first try if FDC_DUMPREGS command works
-	 *  (this indicates that we have a 82072 or better)
-	 *  then try the FDC_VERSION command (82072 doesn't support this)
-	 *  then try the FDC_UNLOCK command (some older 82077's don't support this)
-	 *  then try the FDC_PARTID command (82078's support this)
-	 */
-	cmd[0] = FDC_DUMPREGS;
-	if (fdc_issue_command(cmd, 1, stat, 1) != 0) {
-		TRACE_ABORT(no_fdc, ft_t_bug, "No FDC found");
-	}
-	if (stat[0] == 0x80) {
-		/* invalid command: must be pre 82072 */
-		TRACE_ABORT(i8272,
-			    ft_t_warn, "Type 8272A/765A compatible FDC found");
-	}
-	fdc_result(&stat[1], 9);
-	fdc_save_state[0] = stat[7];
-	fdc_save_state[1] = stat[8];
-	cmd[0] = FDC_VERSION;
-	if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) {
-		TRACE_ABORT(i8272, ft_t_warn, "Type 82072 FDC found");
-	}
-	if (*stat != 0x90) {
-		TRACE_ABORT(i8272, ft_t_warn, "Unknown FDC found");
-	}
-	cmd[0] = FDC_UNLOCK;
-	if(fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] != 0x00) {
-		TRACE_ABORT(i8272, ft_t_warn,
-			    "Type pre-1991 82077 FDC found, "
-			    "treating it like a 82072");
-	}
-	if (fdc_save_state[0] & 0x80) { /* was locked */
-		cmd[0] = FDC_LOCK; /* restore lock */
-		(void)fdc_issue_command(cmd, 1, stat, 1);
-		TRACE(ft_t_warn, "FDC is already locked");
-	}
-	/* Test for a i82078 FDC */
-	cmd[0] = FDC_PARTID;
-	if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) {
-		/* invalid command: not a i82078xx type FDC */
-		for (i = 0; i < 4; ++i) {
-			outb_p(i, fdc.tdr);
-			if ((inb_p(fdc.tdr) & 0x03) != i) {
-				TRACE_ABORT(i82077,
-					    ft_t_warn, "Type 82077 FDC found");
-			}
-		}
-		TRACE_ABORT(i82077AA, ft_t_warn, "Type 82077AA FDC found");
-	}
-	/* FDC_PARTID cmd succeeded */
-	switch (stat[0] >> 5) {
-	case 0x0:
-		/* i82078SL or i82078-1.  The SL part cannot run at
-		 * 2Mbps (the SL and -1 dies are identical; they are
-		 * speed graded after production, according to Intel).
-		 * Some SL's can be detected by doing a SAVE cmd and
-		 * look at bit 7 of the first byte (the SEL3V# bit).
-		 * If it is 0, the part runs off 3Volts, and hence it
-		 * is a SL.
-		 */
-		cmd[0] = FDC_SAVE;
-		if(fdc_issue_command(cmd, 1, stat, 16) < 0) {
-			TRACE(ft_t_err, "FDC_SAVE failed. Dunno why");
-			/* guess we better claim the fdc to be a i82078 */
-			TRACE_ABORT(i82078,
-				    ft_t_warn,
-				    "Type i82078 FDC (i suppose) found");
-		}
-		if ((stat[0] & FDC_SEL3V_BIT)) {
-			/* fdc running off 5Volts; Pray that it's a i82078-1
-			 */
-			TRACE_ABORT(i82078_1, ft_t_warn,
-				  "Type i82078-1 or 5Volt i82078SL FDC found");
-		}
-		TRACE_ABORT(i82078, ft_t_warn,
-			    "Type 3Volt i82078SL FDC (1Mbps) found");
-	case 0x1:
-	case 0x2: /* S82078B  */
-		/* The '78B  isn't '78 compatible.  Detect it as a '77AA */
-		TRACE_ABORT(i82077AA, ft_t_warn, "Type i82077AA FDC found");
-	case 0x3: /* NSC PC8744 core; used in several super-IO chips */
-		TRACE_ABORT(i82077AA,
-			    ft_t_warn, "Type 82077AA compatible FDC found");
-	default:
-		TRACE(ft_t_warn, "A previously undetected FDC found");
-		TRACE_ABORT(i82077AA, ft_t_warn,
-			  "Treating it as a 82077AA. Please report partid= %d",
-			    stat[0]);
-	} /* switch(stat[ 0] >> 5) */
-	TRACE_EXIT no_fdc;
-}
-
-static int fdc_request_regions(void)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (ft_mach2 || ft_probe_fc10) {
-		if (!request_region(fdc.sra, 8, "fdc (ft)")) {
-#ifndef BROKEN_FLOPPY_DRIVER
-			TRACE_EXIT -EBUSY;
-#else
-			TRACE(ft_t_warn,
-"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra);
-#endif
-		}
-	} else {
-		if (!request_region(fdc.sra, 6, "fdc (ft)")) {
-#ifndef BROKEN_FLOPPY_DRIVER
-			TRACE_EXIT -EBUSY;
-#else
-			TRACE(ft_t_warn,
-"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra);
-#endif
-		}
-		if (!request_region(fdc.sra + 7, 1, "fdc (ft)")) {
-#ifndef BROKEN_FLOPPY_DRIVER
-			release_region(fdc.sra, 6);
-			TRACE_EXIT -EBUSY;
-#else
-			TRACE(ft_t_warn,
-"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra + 7);
-#endif
-		}
-	}
-	TRACE_EXIT 0;
-}
-
-void fdc_release_regions(void)
-{
-	TRACE_FUN(ft_t_flow);
-
-	if (fdc.sra != 0) {
-		if (fdc.dor2 != 0) {
-			release_region(fdc.sra, 8);
-		} else {
-			release_region(fdc.sra, 6);
-			release_region(fdc.dir, 1);
-		}
-	}
-	TRACE_EXIT;
-}
-
-static int fdc_config_regs(unsigned int fdc_base, 
-			   unsigned int fdc_irq, 
-			   unsigned int fdc_dma)
-{
-	TRACE_FUN(ft_t_flow);
-
-	fdc.irq = fdc_irq;
-	fdc.dma = fdc_dma;
-	fdc.sra = fdc_base;
-	fdc.srb = fdc_base + 1;
-	fdc.dor = fdc_base + 2;
-	fdc.tdr = fdc_base + 3;
-	fdc.msr = fdc.dsr = fdc_base + 4;
-	fdc.fifo = fdc_base + 5;
-	fdc.dir = fdc.ccr = fdc_base + 7;
-	fdc.dor2 = (ft_mach2 || ft_probe_fc10) ? fdc_base + 6 : 0;
-	TRACE_CATCH(fdc_request_regions(), fdc.sra = 0);
-	TRACE_EXIT 0;
-}
-
-static int fdc_config(void)
-{
-	static int already_done;
-	TRACE_FUN(ft_t_any);
-
-	if (already_done) {
-		TRACE_CATCH(fdc_request_regions(),);
-		*(fdc.hook) = fdc_isr;	/* hook our handler in */
-		TRACE_EXIT 0;
-	}
-	if (ft_probe_fc10) {
-		int fc_type;
-		
-		TRACE_CATCH(fdc_config_regs(ft_fdc_base,
-					    ft_fdc_irq, ft_fdc_dma),);
-		fc_type = fc10_enable();
-		if (fc_type != 0) {
-			TRACE(ft_t_warn, "FC-%c0 controller found", '0' + fc_type);
-			fdc.type = fc10;
-			fdc.hook = &do_ftape;
-			*(fdc.hook) = fdc_isr;	/* hook our handler in */
-			already_done = 1;
-			TRACE_EXIT 0;
-		} else {
-			TRACE(ft_t_warn, "FC-10/20 controller not found");
-			fdc_release_regions();
-			fdc.type = no_fdc;
-			ft_probe_fc10 = 0;
-			ft_fdc_base   = 0x3f0;
-			ft_fdc_irq    = 6;
-			ft_fdc_dma    = 2;
-		}
-	}
-	TRACE(ft_t_warn, "fdc base: 0x%x, irq: %d, dma: %d", 
-	      ft_fdc_base, ft_fdc_irq, ft_fdc_dma);
-	TRACE_CATCH(fdc_config_regs(ft_fdc_base, ft_fdc_irq, ft_fdc_dma),);
-	fdc.hook = &do_ftape;
-	*(fdc.hook) = fdc_isr;	/* hook our handler in */
-	already_done = 1;
-	TRACE_EXIT 0;
-}
-
-static irqreturn_t ftape_interrupt(int irq, void *dev_id)
-{
-	void (*handler) (void) = *fdc.hook;
-	int handled = 0;
-	TRACE_FUN(ft_t_any);
-
-	*fdc.hook = NULL;
-	if (handler) {
-		handled = 1;
-		handler();
-	} else {
-		TRACE(ft_t_bug, "Unexpected ftape interrupt");
-	}
-	TRACE_EXIT IRQ_RETVAL(handled);
-}
-
-static int fdc_grab_irq_and_dma(void)
-{
-	TRACE_FUN(ft_t_any);
-
-	if (fdc.hook == &do_ftape) {
-		/*  Get fast interrupt handler.
-		 */
-		if (request_irq(fdc.irq, ftape_interrupt,
-				IRQF_DISABLED, "ft", ftape_id)) {
-			TRACE_ABORT(-EIO, ft_t_bug,
-				    "Unable to grab IRQ%d for ftape driver",
-				    fdc.irq);
-		}
-		if (request_dma(fdc.dma, ftape_id)) {
-			free_irq(fdc.irq, ftape_id);
-			TRACE_ABORT(-EIO, ft_t_bug,
-			      "Unable to grab DMA%d for ftape driver",
-			      fdc.dma);
-		}
-	}
-	if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) {
-		/* Using same dma channel or irq as standard fdc, need
-		 * to disable the dma-gate on the std fdc. This
-		 * couldn't be done in the floppy driver as some
-		 * laptops are using the dma-gate to enter a low power
-		 * or even suspended state :-(
-		 */
-		outb_p(FDC_RESET_NOT, 0x3f2);
-		TRACE(ft_t_noise, "DMA-gate on standard fdc disabled");
-	}
-	TRACE_EXIT 0;
-}
-
-int fdc_release_irq_and_dma(void)
-{
-	TRACE_FUN(ft_t_any);
-
-	if (fdc.hook == &do_ftape) {
-		disable_dma(fdc.dma);	/* just in case... */
-		free_dma(fdc.dma);
-		free_irq(fdc.irq, ftape_id);
-	}
-	if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) {
-		/* Using same dma channel as standard fdc, need to
-		 * disable the dma-gate on the std fdc. This couldn't
-		 * be done in the floppy driver as some laptops are
-		 * using the dma-gate to enter a low power or even
-		 * suspended state :-(
-		 */
-		outb_p(FDC_RESET_NOT | FDC_DMA_MODE, 0x3f2);
-		TRACE(ft_t_noise, "DMA-gate on standard fdc enabled again");
-	}
-	TRACE_EXIT 0;
-}
-
-int fdc_init(void)
-{
-	TRACE_FUN(ft_t_any);
-
-	/* find a FDC to use */
-	TRACE_CATCH(fdc_config(),);
-	TRACE_CATCH(fdc_grab_irq_and_dma(), fdc_release_regions());
-	ftape_motor = 0;
-	fdc_catch_stray_interrupts(0);	/* clear number of awainted
-					 * stray interrupte 
-					 */
-	fdc_catch_stray_interrupts(1);	/* one always comes (?) */
-	TRACE(ft_t_flow, "resetting fdc");
-	fdc_set_seek_rate(2);		/* use nominal QIC step rate */
-	fdc_reset();			/* init fdc & clear track counters */
-	if (fdc.type == no_fdc) {	/* no FC-10 or FC-20 found */
-		fdc.type = fdc_probe();
-		fdc_reset();		/* update with new knowledge */
-	}
-	if (fdc.type == no_fdc) {
-		fdc_release_irq_and_dma();
-		fdc_release_regions();
-		TRACE_EXIT -ENXIO;
-	}
-	if (fdc.type >= i82077) {
-		if (fdc_fifo_enable() < 0) {
-			TRACE(ft_t_warn, "couldn't enable fdc fifo !");
-		} else {
-			TRACE(ft_t_flow, "fdc fifo enabled and locked");
-		}
-	}
-	TRACE_EXIT 0;
-}