Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 459 insertions, 0 deletions

diff --git a/drivers/char/ec3104_keyb.c b/drivers/char/ec3104_keyb.c
new file mode 100644
index 000000000000..4aed66968821
--- /dev/null
+++ b/drivers/char/ec3104_keyb.c
@@ -0,0 +1,459 @@
+/*
+ * linux/drivers/char/ec3104_keyb.c
+ * 
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ *
+ * based on linux/drivers/char/pc_keyb.c, which had the following comments:
+ *
+ * Separation of the PC low-level part by Geert Uytterhoeven, May 1997
+ * See keyboard.c for the whole history.
+ *
+ * Major cleanup by Martin Mares, May 1997
+ *
+ * Combined the keyboard and PS/2 mouse handling into one file,
+ * because they share the same hardware.
+ * Johan Myreen <jem@iki.fi> 1998-10-08.
+ *
+ * Code fixes to handle mouse ACKs properly.
+ * C. Scott Ananian <cananian@alumni.princeton.edu> 1999-01-29.
+ */
+/* EC3104 note:
+ * This code was written without any documentation about the EC3104 chip.  While
+ * I hope I got most of the basic functionality right, the register names I use
+ * are most likely completely different from those in the chip documentation.
+ *
+ * If you have any further information about the EC3104, please tell me
+ * (prumpf@tux.org).
+ */
+
+#include <linux/config.h>
+
+#include <linux/spinlock.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/mm.h>
+#include <linux/signal.h>
+#include <linux/init.h>
+#include <linux/kbd_ll.h>
+#include <linux/delay.h>
+#include <linux/random.h>
+#include <linux/poll.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/kbd_kern.h>
+#include <linux/smp_lock.h>
+#include <linux/bitops.h>
+
+#include <asm/keyboard.h>
+#include <asm/uaccess.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/ec3104.h>
+
+#include <asm/io.h>
+
+/* Some configuration switches are present in the include file... */
+
+#include <linux/pc_keyb.h>
+
+#define MSR_CTS 0x10
+#define MCR_RTS 0x02
+#define LSR_DR 0x01
+#define LSR_BOTH_EMPTY 0x60
+
+static struct e5_struct {
+	u8 packet[8];
+	int pos;
+	int length;
+
+	u8 cached_mcr;
+	u8 last_msr;
+} ec3104_keyb;
+	
+/* Simple translation table for the SysRq keys */
+
+
+#ifdef CONFIG_MAGIC_SYSRQ
+unsigned char ec3104_kbd_sysrq_xlate[128] =
+	"\000\0331234567890-=\177\t"			/* 0x00 - 0x0f */
+	"qwertyuiop[]\r\000as"				/* 0x10 - 0x1f */
+	"dfghjkl;'`\000\\zxcv"				/* 0x20 - 0x2f */
+	"bnm,./\000*\000 \000\201\202\203\204\205"	/* 0x30 - 0x3f */
+	"\206\207\210\211\212\000\000789-456+1"		/* 0x40 - 0x4f */
+	"230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
+	"\r\000/";					/* 0x60 - 0x6f */
+#endif
+
+static void kbd_write_command_w(int data);
+static void kbd_write_output_w(int data);
+#ifdef CONFIG_PSMOUSE
+static void aux_write_ack(int val);
+static void __aux_write_ack(int val);
+#endif
+
+static DEFINE_SPINLOCK(kbd_controller_lock);
+static unsigned char handle_kbd_event(void);
+
+/* used only by send_data - set by keyboard_interrupt */
+static volatile unsigned char reply_expected;
+static volatile unsigned char acknowledge;
+static volatile unsigned char resend;
+
+
+int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
+{
+	return 0;
+}
+
+int ec3104_kbd_getkeycode(unsigned int scancode)
+{
+	return 0;
+}
+
+
+/* yes, it probably would be faster to use an array.  I don't care. */
+
+static inline unsigned char ec3104_scan2key(unsigned char scancode)
+{
+	switch (scancode) {
+	case  1: /* '`' */
+		return 41;
+		
+	case  2 ... 27:
+		return scancode;
+		
+	case 28: /* '\\' */
+		return 43;
+
+	case 29 ... 39:
+		return scancode + 1;
+
+	case 40: /* '\r' */
+		return 28;
+
+	case 41 ... 50:
+		return scancode + 3;
+
+	case 51: /* ' ' */
+		return 57;
+		
+	case 52: /* escape */
+		return 1;
+
+	case 54: /* insert/delete (labelled delete) */
+		/* this should arguably be 110, but I'd like to have ctrl-alt-del
+		 * working with a standard keymap */
+		return 111;
+
+	case 55: /* left */
+		return 105;
+	case 56: /* home */
+		return 102;
+	case 57: /* end */
+		return 107;
+	case 58: /* up */
+		return 103;
+	case 59: /* down */
+		return 108;
+	case 60: /* pgup */
+		return 104;
+	case 61: /* pgdown */
+		return 109;
+	case 62: /* right */
+		return 106;
+
+	case 79 ... 88: /* f1 - f10 */
+		return scancode - 20;
+
+	case 89 ... 90: /* f11 - f12 */
+		return scancode - 2;
+
+	case 91: /* left shift */
+		return 42;
+
+	case 92: /* right shift */
+		return 54;
+
+	case 93: /* left alt */
+		return 56;
+	case 94: /* right alt */
+		return 100;
+	case 95: /* left ctrl */
+		return 29;
+	case 96: /* right ctrl */
+		return 97;
+
+	case 97: /* caps lock */
+		return 58;
+	case 102: /* left windows */
+		return 125;
+	case 103: /* right windows */
+		return 126;
+
+	case 106: /* Fn */
+		/* this is wrong. */
+		return 84;
+
+	default:
+		return 0;
+	}
+}
+		
+int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode,
+		    char raw_mode)
+{
+	scancode &= 0x7f;
+
+	*keycode = ec3104_scan2key(scancode);
+
+ 	return 1;
+}
+
+char ec3104_kbd_unexpected_up(unsigned char keycode)
+{
+	return 0200;
+}
+
+static inline void handle_keyboard_event(unsigned char scancode)
+{
+#ifdef CONFIG_VT
+	handle_scancode(scancode, !(scancode & 0x80));
+#endif				
+	tasklet_schedule(&keyboard_tasklet);
+}	
+
+void ec3104_kbd_leds(unsigned char leds)
+{
+}
+
+static u8 e5_checksum(u8 *packet, int count)
+{
+	int i;
+	u8 sum = 0;
+
+	for (i=0; i<count; i++)
+		sum ^= packet[i];
+		
+	if (sum & 0x80)
+		sum ^= 0xc0;
+
+	return sum;
+}
+
+static void e5_wait_for_cts(struct e5_struct *k)
+{
+	u8 msr;
+		
+	do {
+		msr = ctrl_inb(EC3104_SER4_MSR);
+	} while (!(msr & MSR_CTS));
+}
+
+
+static void e5_send_byte(u8 byte, struct e5_struct *k)
+{
+	u8 status;
+		
+	do {
+		status = ctrl_inb(EC3104_SER4_LSR);
+	} while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
+	
+	printk("<%02x>", byte);
+
+	ctrl_outb(byte, EC3104_SER4_DATA);
+
+	do {
+		status = ctrl_inb(EC3104_SER4_LSR);
+	} while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
+	
+}
+
+static int e5_send_packet(u8 *packet, int count, struct e5_struct *k)
+{
+	int i;
+
+	disable_irq(EC3104_IRQ_SER4);
+	
+	if (k->cached_mcr & MCR_RTS) {
+		printk("e5_send_packet: too slow\n");
+		enable_irq(EC3104_IRQ_SER4);
+		return -EAGAIN;
+	}
+
+	k->cached_mcr |= MCR_RTS;
+	ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
+
+	e5_wait_for_cts(k);
+
+	printk("p: ");
+
+	for(i=0; i<count; i++)
+		e5_send_byte(packet[i], k);
+
+	e5_send_byte(e5_checksum(packet, count), k);
+
+	printk("\n");
+
+	udelay(1500);
+
+	k->cached_mcr &= ~MCR_RTS;
+	ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
+
+	set_current_state(TASK_UNINTERRUPTIBLE);
+	
+	
+
+	enable_irq(EC3104_IRQ_SER4);
+
+	
+
+	return 0;
+}
+
+/*
+ * E5 packets we know about:
+ * E5->host 0x80 0x05 <checksum> - resend packet
+ * host->E5 0x83 0x43 <contrast> - set LCD contrast
+ * host->E5 0x85 0x41 0x02 <brightness> 0x02 - set LCD backlight
+ * E5->host 0x87 <ps2 packet> 0x00 <checksum> - external PS2 
+ * E5->host 0x88 <scancode> <checksum> - key press
+ */
+
+static void e5_receive(struct e5_struct *k)
+{
+	k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA);
+
+	if (k->pos == 1) {
+		switch(k->packet[0]) {
+		case 0x80:
+			k->length = 3;
+			break;
+			
+		case 0x87: /* PS2 ext */
+			k->length = 6;
+			break;
+
+		case 0x88: /* keyboard */
+			k->length = 3;
+			break;
+
+		default:
+			k->length = 1;
+			printk(KERN_WARNING "unknown E5 packet %02x\n",
+			       k->packet[0]);
+		}
+	}
+
+	if (k->pos == k->length) {
+		int i;
+
+		if (e5_checksum(k->packet, k->length) != 0)
+			printk(KERN_WARNING "E5: wrong checksum\n");
+
+#if 0
+		printk("E5 packet [");
+		for(i=0; i<k->length; i++) {
+			printk("%02x ", k->packet[i]);
+		}
+
+		printk("(%02x)]\n", e5_checksum(k->packet, k->length-1));
+#endif
+
+		switch(k->packet[0]) {
+		case 0x80:
+		case 0x88:
+			handle_keyboard_event(k->packet[1]);
+			break;
+		}
+
+		k->pos = k->length = 0;
+	}
+}
+
+static void ec3104_keyb_interrupt(int irq, void *data, struct pt_regs *regs)
+{
+	struct e5_struct *k = &ec3104_keyb;
+	u8 msr, lsr;
+
+	msr = ctrl_inb(EC3104_SER4_MSR);
+	
+	if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
+		if (k->cached_mcr & MCR_RTS)
+			printk("confused: RTS already high\n");
+		/* CTS went high.  Send RTS. */
+		k->cached_mcr |= MCR_RTS;
+		
+		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
+	} else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
+		/* CTS went low. */
+		if (!(k->cached_mcr & MCR_RTS))
+			printk("confused: RTS already low\n");
+
+		k->cached_mcr &= ~MCR_RTS;
+
+		ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
+	}
+
+	k->last_msr = msr;
+
+	lsr = ctrl_inb(EC3104_SER4_LSR);
+
+	if (lsr & LSR_DR)
+		e5_receive(k);
+}
+
+static void ec3104_keyb_clear_state(void)
+{
+	struct e5_struct *k = &ec3104_keyb;
+	u8 msr, lsr;
+	
+	/* we want CTS to be low */
+	k->last_msr = 0;
+
+	for (;;) {
+		msleep(100);
+
+		msr = ctrl_inb(EC3104_SER4_MSR);
+	
+		lsr = ctrl_inb(EC3104_SER4_LSR);
+		
+		if (lsr & LSR_DR) {
+			e5_receive(k);
+			continue;
+		}
+
+		if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
+			if (k->cached_mcr & MCR_RTS)
+				printk("confused: RTS already high\n");
+			/* CTS went high.  Send RTS. */
+			k->cached_mcr |= MCR_RTS;
+		
+			ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
+		} else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
+			/* CTS went low. */
+			if (!(k->cached_mcr & MCR_RTS))
+				printk("confused: RTS already low\n");
+			
+			k->cached_mcr &= ~MCR_RTS;
+			
+			ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
+		} else
+			break;
+
+		k->last_msr = msr;
+
+		continue;
+	}
+}
+
+void __init ec3104_kbd_init_hw(void)
+{
+	ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR);
+	ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR);
+
+	ec3104_keyb_clear_state();
+
+	/* Ok, finally allocate the IRQ, and off we go.. */
+	request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL);
+}