Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

19 files changed, 1525 insertions, 424 deletions

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 364f080768d0..ed5c2738bea2 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -2,9 +2,17 @@
 menu "Bluetooth device drivers"
 	depends on BT
 
+config BT_INTEL
+	tristate
+
+config BT_BCM
+	tristate
+	select FW_LOADER
+
 config BT_HCIBTUSB
 	tristate "HCI USB driver"
 	depends on USB
+	select BT_INTEL
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
@@ -13,6 +21,17 @@ config BT_HCIBTUSB
 	  Say Y here to compile support for Bluetooth USB devices into the
 	  kernel or say M to compile it as module (btusb).
 
+config BT_HCIBTUSB_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIBTUSB
+	select BT_BCM
+	default y
+	help
+	  The Broadcom protocol support enables firmware and patchram
+	  download support for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
 config BT_HCIBTSDIO
 	tristate "HCI SDIO driver"
 	depends on MMC
@@ -62,6 +81,7 @@ config BT_HCIUART_BCSP
 config BT_HCIUART_ATH3K
 	bool "Atheros AR300x serial support"
 	depends on BT_HCIUART
+	select BT_HCIUART_H4
 	help
 	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for
 	  communication between host and Atheros AR300x Bluetooth devices.
@@ -94,6 +114,27 @@ config BT_HCIUART_3WIRE
 
 	  Say Y here to compile support for Three-wire UART protocol.
 
+config BT_HCIUART_INTEL
+	bool "Intel protocol support"
+	depends on BT_HCIUART
+	select BT_INTEL
+	help
+	  The Intel protocol support enables Bluetooth HCI over serial
+	  port interface for Intel Bluetooth controllers.
+
+	  Say Y here to compile support for Intel protocol.
+
+config BT_HCIUART_BCM
+	bool "Broadcom protocol support"
+	depends on BT_HCIUART
+	select BT_HCIUART_H4
+	select BT_BCM
+	help
+	  The Broadcom protocol support enables Bluetooth HCI over serial
+	  port interface for Broadcom Bluetooth controllers.
+
+	  Say Y here to compile support for Broadcom protocol.
+
 config BT_HCIBCM203X
 	tristate "HCI BCM203x USB driver"
 	depends on USB
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 9fe8a875a827..dd0d9c40b999 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -15,10 +15,12 @@ obj-$(CONFIG_BT_HCIBTUART)	+= btuart_cs.o
 obj-$(CONFIG_BT_HCIBTUSB)	+= btusb.o
 obj-$(CONFIG_BT_HCIBTSDIO)	+= btsdio.o
 
+obj-$(CONFIG_BT_INTEL)		+= btintel.o
 obj-$(CONFIG_BT_ATH3K)		+= ath3k.o
 obj-$(CONFIG_BT_MRVL)		+= btmrvl.o
 obj-$(CONFIG_BT_MRVL_SDIO)	+= btmrvl_sdio.o
 obj-$(CONFIG_BT_WILINK)		+= btwilink.o
+obj-$(CONFIG_BT_BCM)		+= btbcm.o
 
 btmrvl-y			:= btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)	+= btmrvl_debugfs.o
@@ -29,6 +31,8 @@ hci_uart-$(CONFIG_BT_HCIUART_BCSP)	+= hci_bcsp.o
 hci_uart-$(CONFIG_BT_HCIUART_LL)	+= hci_ll.o
 hci_uart-$(CONFIG_BT_HCIUART_ATH3K)	+= hci_ath.o
 hci_uart-$(CONFIG_BT_HCIUART_3WIRE)	+= hci_h5.o
+hci_uart-$(CONFIG_BT_HCIUART_INTEL)	+= hci_intel.o
+hci_uart-$(CONFIG_BT_HCIUART_BCM)	+= hci_bcm.o
 hci_uart-objs				:= $(hci_uart-y)
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index de4c8499cbac..288547a3c566 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -65,6 +65,7 @@ static const struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 with sflash firmware*/
 	{ USB_DEVICE(0x0489, 0xE027) },
 	{ USB_DEVICE(0x0489, 0xE03D) },
+	{ USB_DEVICE(0x04F2, 0xAFF1) },
 	{ USB_DEVICE(0x0930, 0x0215) },
 	{ USB_DEVICE(0x0CF3, 0x3002) },
 	{ USB_DEVICE(0x0CF3, 0xE019) },
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
new file mode 100644
index 000000000000..d0741f3ed7ec
--- /dev/null
+++ b/drivers/bluetooth/btbcm.c
@@ -0,0 +1,387 @@
+/*
+ *
+ *  Bluetooth support for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+
+int btbcm_check_bdaddr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_bd_addr *bda;
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Reading device address failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		BT_ERR("%s: BCM: Device address length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *)skb->data;
+	if (bda->status) {
+		BT_ERR("%s: BCM: Device address result failed (%02x)",
+		       hdev->name, bda->status);
+		kfree_skb(skb);
+		return -bt_to_errno(bda->status);
+	}
+
+	/* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+	 * with no configured address.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
+		BT_INFO("%s: BCM: Using default device address (%pMR)",
+			hdev->name, &bda->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_check_bdaddr);
+
+int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Change address command failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
+
+static int btbcm_reset(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Reset failed (%d)", hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static struct sk_buff *btbcm_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Reading local version info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		BT_ERR("%s: BCM: Local version length mismatch", hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_verbose_config(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc79, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Read verbose config info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 7) {
+		BT_ERR("%s: BCM: Verbose config length mismatch", hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static struct sk_buff *btbcm_read_usb_product(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, 0xfc5a, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: BCM: Read USB product info failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != 5) {
+		BT_ERR("%s: BCM: USB product length mismatch", hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
+static const struct {
+	u16 subver;
+	const char *name;
+} bcm_uart_subver_table[] = {
+	{ 0x410e, "BCM43341B0"	},	/* 002.001.014 */
+	{ }
+};
+
+static const struct {
+	u16 subver;
+	const char *name;
+} bcm_usb_subver_table[] = {
+	{ 0x210b, "BCM43142A0"	},	/* 001.001.011 */
+	{ 0x2112, "BCM4314A0"	},	/* 001.001.018 */
+	{ 0x2118, "BCM20702A0"	},	/* 001.001.024 */
+	{ 0x2126, "BCM4335A0"	},	/* 001.001.038 */
+	{ 0x220e, "BCM20702A1"	},	/* 001.002.014 */
+	{ 0x230f, "BCM4354A2"	},	/* 001.003.015 */
+	{ 0x4106, "BCM4335B0"	},	/* 002.001.006 */
+	{ 0x410e, "BCM20702B0"	},	/* 002.001.014 */
+	{ 0x6109, "BCM4335C0"	},	/* 003.001.009 */
+	{ 0x610c, "BCM4354"	},	/* 003.001.012 */
+	{ }
+};
+
+int btbcm_setup_patchram(struct hci_dev *hdev)
+{
+	const struct hci_command_hdr *cmd;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	size_t fw_size;
+	char fw_name[64];
+	u16 opcode, subver, rev, pid, vid;
+	const char *hw_name = NULL;
+	struct sk_buff *skb;
+	struct hci_rp_read_local_version *ver;
+	int i, err;
+
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		return err;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
+	kfree_skb(skb);
+
+	switch ((rev & 0xf000) >> 12) {
+	case 0:
+		for (i = 0; bcm_uart_subver_table[i].name; i++) {
+			if (subver == bcm_uart_subver_table[i].subver) {
+				hw_name = bcm_uart_subver_table[i].name;
+				break;
+			}
+		}
+
+		snprintf(fw_name, sizeof(fw_name), "brcm/%s.hcd",
+			 hw_name ? : "BCM");
+		break;
+	case 1:
+	case 2:
+		/* Read USB Product Info */
+		skb = btbcm_read_usb_product(hdev);
+		if (IS_ERR(skb))
+			return PTR_ERR(skb);
+
+		vid = get_unaligned_le16(skb->data + 1);
+		pid = get_unaligned_le16(skb->data + 3);
+		kfree_skb(skb);
+
+		for (i = 0; bcm_usb_subver_table[i].name; i++) {
+			if (subver == bcm_usb_subver_table[i].subver) {
+				hw_name = bcm_usb_subver_table[i].name;
+				break;
+			}
+		}
+
+		snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
+			 hw_name ? : "BCM", vid, pid);
+		break;
+	default:
+		return 0;
+	}
+
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	err = request_firmware(&fw, fw_name, &hdev->dev);
+	if (err < 0) {
+		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
+		return 0;
+	}
+
+	/* Start Download */
+	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: BCM: Download Minidrv command failed (%d)",
+		       hdev->name, err);
+		goto reset;
+	}
+	kfree_skb(skb);
+
+	/* 50 msec delay after Download Minidrv completes */
+	msleep(50);
+
+	fw_ptr = fw->data;
+	fw_size = fw->size;
+
+	while (fw_size >= sizeof(*cmd)) {
+		const u8 *cmd_param;
+
+		cmd = (struct hci_command_hdr *)fw_ptr;
+		fw_ptr += sizeof(*cmd);
+		fw_size -= sizeof(*cmd);
+
+		if (fw_size < cmd->plen) {
+			BT_ERR("%s: BCM: patch %s is corrupted", hdev->name,
+			       fw_name);
+			err = -EINVAL;
+			goto reset;
+		}
+
+		cmd_param = fw_ptr;
+		fw_ptr += cmd->plen;
+		fw_size -= cmd->plen;
+
+		opcode = le16_to_cpu(cmd->opcode);
+
+		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
+				     HCI_INIT_TIMEOUT);
+		if (IS_ERR(skb)) {
+			err = PTR_ERR(skb);
+			BT_ERR("%s: BCM: patch command %04x failed (%d)",
+			       hdev->name, opcode, err);
+			goto reset;
+		}
+		kfree_skb(skb);
+	}
+
+	/* 250 msec delay after Launch Ram completes */
+	msleep(250);
+
+reset:
+	/* Reset */
+	err = btbcm_reset(hdev);
+	if (err)
+		goto done;
+
+	/* Read Local Version Info */
+	skb = btbcm_read_local_version(hdev);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		goto done;
+	}
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+	rev = le16_to_cpu(ver->hci_rev);
+	subver = le16_to_cpu(ver->lmp_subver);
+	kfree_skb(skb);
+
+	BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+		hw_name ? : "BCM", (subver & 0x7000) >> 13,
+		(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+	btbcm_check_bdaddr(hdev);
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+done:
+	release_firmware(fw);
+
+	return err;
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
+
+int btbcm_setup_apple(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	/* Read Verbose Config Version Info */
+	skb = btbcm_read_verbose_config(hdev);
+	if (IS_ERR(skb))
+		return PTR_ERR(skb);
+
+	BT_INFO("%s: BCM: chip id %u build %4.4u", hdev->name, skb->data[1],
+		get_unaligned_le16(skb->data + 5));
+	kfree_skb(skb);
+
+	set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_apple);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Broadcom devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
new file mode 100644
index 000000000000..34268ae3eb46
--- /dev/null
+++ b/drivers/bluetooth/btbcm.h
@@ -0,0 +1,54 @@
+/*
+ *
+ *  Bluetooth support for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#if IS_ENABLED(CONFIG_BT_BCM)
+
+int btbcm_check_bdaddr(struct hci_dev *hdev);
+int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+
+int btbcm_setup_patchram(struct hci_dev *hdev);
+int btbcm_setup_apple(struct hci_dev *hdev);
+
+#else
+
+static inline int btbcm_check_bdaddr(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btbcm_setup_patchram(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+static inline int btbcm_setup_apple(struct hci_dev *hdev)
+{
+	return 0;
+}
+
+#endif
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
new file mode 100644
index 000000000000..2d43d4279b00
--- /dev/null
+++ b/drivers/bluetooth/btintel.c
@@ -0,0 +1,101 @@
+/*
+ *
+ *  Bluetooth support for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/module.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+
+int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+	struct hci_rp_read_bd_addr *bda;
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		BT_ERR("%s: Reading Intel device address failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+
+	if (skb->len != sizeof(*bda)) {
+		BT_ERR("%s: Intel device address length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	bda = (struct hci_rp_read_bd_addr *)skb->data;
+	if (bda->status) {
+		BT_ERR("%s: Intel device address result failed (%02x)",
+		       hdev->name, bda->status);
+		kfree_skb(skb);
+		return -bt_to_errno(bda->status);
+	}
+
+	/* For some Intel based controllers, the default Bluetooth device
+	 * address 00:03:19:9E:8B:00 can be found. These controllers are
+	 * fully operational, but have the danger of duplicate addresses
+	 * and that in turn can cause problems with Bluetooth operation.
+	 */
+	if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
+		BT_ERR("%s: Found Intel default device address (%pMR)",
+		       hdev->name, &bda->bdaddr);
+		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	}
+
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
+
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	struct sk_buff *skb;
+	int err;
+
+	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		err = PTR_ERR(skb);
+		BT_ERR("%s: Changing Intel device address failed (%d)",
+		       hdev->name, err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/btintel.h b/drivers/bluetooth/btintel.h
new file mode 100644
index 000000000000..4bda6ab34f60
--- /dev/null
+++ b/drivers/bluetooth/btintel.h
@@ -0,0 +1,89 @@
+/*
+ *
+ *  Bluetooth support for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+struct intel_version {
+	u8 status;
+	u8 hw_platform;
+	u8 hw_variant;
+	u8 hw_revision;
+	u8 fw_variant;
+	u8 fw_revision;
+	u8 fw_build_num;
+	u8 fw_build_ww;
+	u8 fw_build_yy;
+	u8 fw_patch_num;
+} __packed;
+
+struct intel_boot_params {
+	__u8     status;
+	__u8     otp_format;
+	__u8     otp_content;
+	__u8     otp_patch;
+	__le16   dev_revid;
+	__u8     secure_boot;
+	__u8     key_from_hdr;
+	__u8     key_type;
+	__u8     otp_lock;
+	__u8     api_lock;
+	__u8     debug_lock;
+	bdaddr_t otp_bdaddr;
+	__u8     min_fw_build_nn;
+	__u8     min_fw_build_cw;
+	__u8     min_fw_build_yy;
+	__u8     limited_cce;
+	__u8     unlocked_state;
+} __packed;
+
+struct intel_bootup {
+	__u8     zero;
+	__u8     num_cmds;
+	__u8     source;
+	__u8     reset_type;
+	__u8     reset_reason;
+	__u8     ddc_status;
+} __packed;
+
+struct intel_secure_send_result {
+	__u8     result;
+	__le16   opcode;
+	__u8     status;
+} __packed;
+
+#if IS_ENABLED(CONFIG_BT_INTEL)
+
+int btintel_check_bdaddr(struct hci_dev *hdev);
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+
+#else
+
+static inline int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+	return -EOPNOTSUPP;
+}
+
+static inline int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+	return -EOPNOTSUPP;
+}
+
+#endif
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index e75f8ee2512c..086f0ec89580 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -111,6 +111,7 @@ struct btmrvl_private {
 
 /* Vendor specific Bluetooth commands */
 #define BT_CMD_PSCAN_WIN_REPORT_ENABLE	0xFC03
+#define BT_CMD_ROUTE_SCO_TO_HOST	0xFC1D
 #define BT_CMD_SET_BDADDR		0xFC22
 #define BT_CMD_AUTO_SLEEP_MODE		0xFC23
 #define BT_CMD_HOST_SLEEP_CONFIG	0xFC59
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index 413597789c61..de05deb444ce 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -230,6 +230,18 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, u8 subcmd)
 }
 EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
 
+static int btmrvl_enable_sco_routing_to_host(struct btmrvl_private *priv)
+{
+	int ret;
+	u8 subcmd = 0;
+
+	ret = btmrvl_send_sync_cmd(priv, BT_CMD_ROUTE_SCO_TO_HOST, &subcmd, 1);
+	if (ret)
+		BT_ERR("BT_CMD_ROUTE_SCO_TO_HOST command failed: %#x", ret);
+
+	return ret;
+}
+
 int btmrvl_pscan_window_reporting(struct btmrvl_private *priv, u8 subcmd)
 {
 	struct btmrvl_sdio_card *card = priv->btmrvl_dev.card;
@@ -558,6 +570,8 @@ static int btmrvl_setup(struct hci_dev *hdev)
 
 	btmrvl_check_device_tree(priv);
 
+	btmrvl_enable_sco_routing_to_host(priv);
+
 	btmrvl_pscan_window_reporting(priv, 0x01);
 
 	priv->btmrvl_dev.psmode = 1;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8bfc4c2bba87..de7b236eeae7 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -28,7 +28,10 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
-#define VERSION "0.7"
+#include "btintel.h"
+#include "btbcm.h"
+
+#define VERSION "0.8"
 
 static bool disable_scofix;
 static bool force_scofix;
@@ -52,6 +55,8 @@ static struct usb_driver btusb_driver;
 #define BTUSB_SWAVE		0x1000
 #define BTUSB_INTEL_NEW		0x2000
 #define BTUSB_AMP		0x4000
+#define BTUSB_QCA_ROME		0x8000
+#define BTUSB_BCM_APPLE		0x10000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -61,7 +66,8 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE_INFO(0xe0, 0x01, 0x04), .driver_info = BTUSB_AMP },
 
 	/* Apple-specific (Broadcom) devices */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_APPLE },
 
 	/* MediaTek MT76x0E */
 	{ USB_DEVICE(0x0e8d, 0x763f) },
@@ -107,13 +113,7 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_DEVICE(0x0c10, 0x0000) },
 
 	/* Broadcom BCM20702A0 */
-	{ USB_DEVICE(0x0489, 0xe042) },
-	{ USB_DEVICE(0x04ca, 0x2003) },
-	{ USB_DEVICE(0x0b05, 0x17b5) },
-	{ USB_DEVICE(0x0b05, 0x17cb) },
 	{ USB_DEVICE(0x413c, 0x8197) },
-	{ USB_DEVICE(0x13d3, 0x3404),
-	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Broadcom BCM20702B0 (Dynex/Insignia) */
 	{ USB_DEVICE(0x19ff, 0x0239), .driver_info = BTUSB_BCM_PATCHRAM },
@@ -135,10 +135,12 @@ static const struct usb_device_id btusb_table[] = {
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Belkin F8065bf - Broadcom based */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* IMC Networks - Broadcom based */
-	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01),
+	  .driver_info = BTUSB_BCM_PATCHRAM },
 
 	/* Intel Bluetooth USB Bootloader (RAM module) */
 	{ USB_DEVICE(0x8087, 0x0a5a),
@@ -159,6 +161,7 @@ static const struct usb_device_id blacklist_table[] = {
 	/* Atheros 3011 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE },
+	{ USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
 	{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
@@ -212,6 +215,10 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
+	/* QCA ROME chipset */
+	{ USB_DEVICE(0x0cf3, 0xe300), .driver_info = BTUSB_QCA_ROME },
+	{ USB_DEVICE(0x0cf3, 0xe360), .driver_info = BTUSB_QCA_ROME },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = BTUSB_BCM92035 },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -337,17 +344,9 @@ struct btusb_data {
 
 	int (*recv_event)(struct hci_dev *hdev, struct sk_buff *skb);
 	int (*recv_bulk)(struct btusb_data *data, void *buffer, int count);
-};
 
-static int btusb_wait_on_bit_timeout(void *word, int bit, unsigned long timeout,
-				     unsigned mode)
-{
-	might_sleep();
-	if (!test_bit(bit, word))
-		return 0;
-	return out_of_line_wait_on_bit_timeout(word, bit, bit_wait_timeout,
-					       mode, timeout);
-}
+	int (*setup_on_usb)(struct hci_dev *hdev);
+};
 
 static inline void btusb_free_frags(struct btusb_data *data)
 {
@@ -888,6 +887,15 @@ static int btusb_open(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	/* Patching USB firmware files prior to starting any URBs of HCI path
+	 * It is more safe to use USB bulk channel for downloading USB patch
+	 */
+	if (data->setup_on_usb) {
+		err = data->setup_on_usb(hdev);
+		if (err <0)
+			return err;
+	}
+
 	err = usb_autopm_get_interface(data->intf);
 	if (err < 0)
 		return err;
@@ -1263,6 +1271,28 @@ static void btusb_waker(struct work_struct *work)
 	usb_autopm_put_interface(data->intf);
 }
 
+static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return skb;
+	}
+
+	if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
+		       hdev->name);
+		kfree_skb(skb);
+		return ERR_PTR(-EIO);
+	}
+
+	return skb;
+}
+
 static int btusb_setup_bcm92035(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -1287,12 +1317,9 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		BT_ERR("Reading local version failed (%ld)", -PTR_ERR(skb));
+	skb = btusb_read_local_version(hdev);
+	if (IS_ERR(skb))
 		return -PTR_ERR(skb);
-	}
 
 	rp = (struct hci_rp_read_local_version *)skb->data;
 
@@ -1318,39 +1345,6 @@ static int btusb_setup_csr(struct hci_dev *hdev)
 	return ret;
 }
 
-struct intel_version {
-	u8 status;
-	u8 hw_platform;
-	u8 hw_variant;
-	u8 hw_revision;
-	u8 fw_variant;
-	u8 fw_revision;
-	u8 fw_build_num;
-	u8 fw_build_ww;
-	u8 fw_build_yy;
-	u8 fw_patch_num;
-} __packed;
-
-struct intel_boot_params {
-	__u8     status;
-	__u8     otp_format;
-	__u8     otp_content;
-	__u8     otp_patch;
-	__le16   dev_revid;
-	__u8     secure_boot;
-	__u8     key_from_hdr;
-	__u8     key_type;
-	__u8     otp_lock;
-	__u8     api_lock;
-	__u8     debug_lock;
-	bdaddr_t otp_bdaddr;
-	__u8     min_fw_build_nn;
-	__u8     min_fw_build_cw;
-	__u8     min_fw_build_yy;
-	__u8     limited_cce;
-	__u8     unlocked_state;
-} __packed;
-
 static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
 						       struct intel_version *ver)
 {
@@ -1507,51 +1501,6 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
 	return 0;
 }
 
-#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
-
-static int btusb_check_bdaddr_intel(struct hci_dev *hdev)
-{
-	struct sk_buff *skb;
-	struct hci_rp_read_bd_addr *rp;
-
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		BT_ERR("%s reading Intel device address failed (%ld)",
-		       hdev->name, PTR_ERR(skb));
-		return PTR_ERR(skb);
-	}
-
-	if (skb->len != sizeof(*rp)) {
-		BT_ERR("%s Intel device address length mismatch", hdev->name);
-		kfree_skb(skb);
-		return -EIO;
-	}
-
-	rp = (struct hci_rp_read_bd_addr *)skb->data;
-	if (rp->status) {
-		BT_ERR("%s Intel device address result failed (%02x)",
-		       hdev->name, rp->status);
-		kfree_skb(skb);
-		return -bt_to_errno(rp->status);
-	}
-
-	/* For some Intel based controllers, the default Bluetooth device
-	 * address 00:03:19:9E:8B:00 can be found. These controllers are
-	 * fully operational, but have the danger of duplicate addresses
-	 * and that in turn can cause problems with Bluetooth operation.
-	 */
-	if (!bacmp(&rp->bdaddr, BDADDR_INTEL)) {
-		BT_ERR("%s found Intel default device address (%pMR)",
-		       hdev->name, &rp->bdaddr);
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
-	}
-
-	kfree_skb(skb);
-
-	return 0;
-}
-
 static int btusb_setup_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
@@ -1624,7 +1573,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 		BT_INFO("%s: Intel device is already patched. patch num: %02x",
 			hdev->name, ver->fw_patch_num);
 		kfree_skb(skb);
-		btusb_check_bdaddr_intel(hdev);
+		btintel_check_bdaddr(hdev);
 		return 0;
 	}
 
@@ -1637,7 +1586,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	fw = btusb_setup_intel_get_fw(hdev, ver);
 	if (!fw) {
 		kfree_skb(skb);
-		btusb_check_bdaddr_intel(hdev);
+		btintel_check_bdaddr(hdev);
 		return 0;
 	}
 	fw_ptr = fw->data;
@@ -1718,7 +1667,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
 	BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
 		hdev->name);
 
-	btusb_check_bdaddr_intel(hdev);
+	btintel_check_bdaddr(hdev);
 	return 0;
 
 exit_mfg_disable:
@@ -1734,7 +1683,7 @@ exit_mfg_disable:
 
 	BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
 
-	btusb_check_bdaddr_intel(hdev);
+	btintel_check_bdaddr(hdev);
 	return 0;
 
 exit_mfg_deactivate:
@@ -1755,7 +1704,7 @@ exit_mfg_deactivate:
 	BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
 		hdev->name);
 
-	btusb_check_bdaddr_intel(hdev);
+	btintel_check_bdaddr(hdev);
 	return 0;
 }
 
@@ -1797,6 +1746,38 @@ static int btusb_recv_bulk_intel(struct btusb_data *data, void *buffer,
 	return btusb_recv_bulk(data, buffer, count);
 }
 
+static void btusb_intel_bootup(struct btusb_data *data, const void *ptr,
+			       unsigned int len)
+{
+	const struct intel_bootup *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
+		smp_mb__after_atomic();
+		wake_up_bit(&data->flags, BTUSB_BOOTING);
+	}
+}
+
+static void btusb_intel_secure_send_result(struct btusb_data *data,
+					   const void *ptr, unsigned int len)
+{
+	const struct intel_secure_send_result *evt = ptr;
+
+	if (len != sizeof(*evt))
+		return;
+
+	if (evt->result)
+		set_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
+
+	if (test_and_clear_bit(BTUSB_DOWNLOADING, &data->flags) &&
+	    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
+		smp_mb__after_atomic();
+		wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
+	}
+}
+
 static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
 {
 	struct btusb_data *data = hci_get_drvdata(hdev);
@@ -1804,32 +1785,27 @@ static int btusb_recv_event_intel(struct hci_dev *hdev, struct sk_buff *skb)
 	if (test_bit(BTUSB_BOOTLOADER, &data->flags)) {
 		struct hci_event_hdr *hdr = (void *)skb->data;
 
-		/* When the firmware loading completes the device sends
-		 * out a vendor specific event indicating the result of
-		 * the firmware loading.
-		 */
-		if (skb->len == 7 && hdr->evt == 0xff && hdr->plen == 0x05 &&
-		    skb->data[2] == 0x06) {
-			if (skb->data[3] != 0x00)
-				test_bit(BTUSB_FIRMWARE_FAILED, &data->flags);
-
-			if (test_and_clear_bit(BTUSB_DOWNLOADING,
-					       &data->flags) &&
-			    test_bit(BTUSB_FIRMWARE_LOADED, &data->flags)) {
-				smp_mb__after_atomic();
-				wake_up_bit(&data->flags, BTUSB_DOWNLOADING);
-			}
-		}
-
-		/* When switching to the operational firmware the device
-		 * sends a vendor specific event indicating that the bootup
-		 * completed.
-		 */
-		if (skb->len == 9 && hdr->evt == 0xff && hdr->plen == 0x07 &&
-		    skb->data[2] == 0x02) {
-			if (test_and_clear_bit(BTUSB_BOOTING, &data->flags)) {
-				smp_mb__after_atomic();
-				wake_up_bit(&data->flags, BTUSB_BOOTING);
+		if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
+		    hdr->plen > 0) {
+			const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
+			unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
+
+			switch (skb->data[2]) {
+			case 0x02:
+				/* When switching to the operational firmware
+				 * the device sends a vendor specific event
+				 * indicating that the bootup completed.
+				 */
+				btusb_intel_bootup(data, ptr, len);
+				break;
+			case 0x06:
+				/* When the firmware loading completes the
+				 * device sends out a vendor specific event
+				 * indicating the result of the firmware
+				 * loading.
+				 */
+				btusb_intel_secure_send_result(data, ptr, len);
+				break;
 			}
 		}
 	}
@@ -2031,7 +2007,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	if (ver->fw_variant == 0x23) {
 		kfree_skb(skb);
 		clear_bit(BTUSB_BOOTLOADER, &data->flags);
-		btusb_check_bdaddr_intel(hdev);
+		btintel_check_bdaddr(hdev);
 		return 0;
 	}
 
@@ -2197,9 +2173,9 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
 	 * and thus just timeout if that happens and fail the setup
 	 * of this device.
 	 */
-	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
-					msecs_to_jiffies(5000),
-					TASK_INTERRUPTIBLE);
+	err = wait_on_bit_timeout(&data->flags, BTUSB_DOWNLOADING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(5000));
 	if (err == 1) {
 		BT_ERR("%s: Firmware loading interrupted", hdev->name);
 		err = -EINTR;
@@ -2250,9 +2226,9 @@ done:
 	 */
 	BT_INFO("%s: Waiting for device to boot", hdev->name);
 
-	err = btusb_wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
-					msecs_to_jiffies(1000),
-					TASK_INTERRUPTIBLE);
+	err = wait_on_bit_timeout(&data->flags, BTUSB_BOOTING,
+				  TASK_INTERRUPTIBLE,
+				  msecs_to_jiffies(1000));
 
 	if (err == 1) {
 		BT_ERR("%s: Device boot interrupted", hdev->name);
@@ -2315,15 +2291,19 @@ static void btusb_hw_error_intel(struct hci_dev *hdev, u8 code)
 	kfree_skb(skb);
 }
 
-static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+static int btusb_shutdown_intel(struct hci_dev *hdev)
 {
 	struct sk_buff *skb;
 	long ret;
 
-	skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+	/* Some platforms have an issue with BT LED when the interface is
+	 * down or BT radio is turned off, which takes 5 seconds to BT LED
+	 * goes off. This command turns off the BT LED immediately.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
 		ret = PTR_ERR(skb);
-		BT_ERR("%s: changing Intel device address failed (%ld)",
+		BT_ERR("%s: turning off Intel device LED failed (%ld)",
 		       hdev->name, ret);
 		return ret;
 	}
@@ -2355,232 +2335,279 @@ static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
 	return 0;
 }
 
-#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
-
-static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
+static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
+				    const bdaddr_t *bdaddr)
 {
-	struct btusb_data *data = hci_get_drvdata(hdev);
-	struct usb_device *udev = data->udev;
-	char fw_name[64];
-	const struct firmware *fw;
-	const u8 *fw_ptr;
-	size_t fw_size;
-	const struct hci_command_hdr *cmd;
-	const u8 *cmd_param;
-	u16 opcode;
 	struct sk_buff *skb;
-	struct hci_rp_read_local_version *ver;
-	struct hci_rp_read_bd_addr *bda;
+	u8 buf[10];
 	long ret;
 
-	snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd",
-		 udev->product ? udev->product : "BCM",
-		 le16_to_cpu(udev->descriptor.idVendor),
-		 le16_to_cpu(udev->descriptor.idProduct));
-
-	ret = request_firmware(&fw, fw_name, &hdev->dev);
-	if (ret < 0) {
-		BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
-		return 0;
-	}
+	buf[0] = 0x01;
+	buf[1] = 0x01;
+	buf[2] = 0x00;
+	buf[3] = sizeof(bdaddr_t);
+	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
 
-	/* Reset */
-	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
 		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
-		goto done;
+		BT_ERR("%s: Change address command failed (%ld)",
+		       hdev->name, ret);
+		return ret;
 	}
 	kfree_skb(skb);
 
-	/* Read Local Version Info */
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
-		       hdev->name, ret);
-		goto done;
-	}
+	return 0;
+}
 
-	if (skb->len != sizeof(*ver)) {
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
-		       hdev->name);
-		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
-	}
+#define QCA_DFU_PACKET_LEN	4096
 
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: BCM: patching hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
-		ver->lmp_ver, ver->lmp_subver);
-	kfree_skb(skb);
+#define QCA_GET_TARGET_VERSION	0x09
+#define QCA_CHECK_STATUS	0x05
+#define QCA_DFU_DOWNLOAD	0x01
 
-	/* Start Download */
-	skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: BCM: Download Minidrv command failed (%ld)",
-		       hdev->name, ret);
-		goto reset_fw;
-	}
-	kfree_skb(skb);
+#define QCA_SYSCFG_UPDATED	0x40
+#define QCA_PATCH_UPDATED	0x80
+#define QCA_DFU_TIMEOUT		3000
 
-	/* 50 msec delay after Download Minidrv completes */
-	msleep(50);
+struct qca_version {
+	__le32	rom_version;
+	__le32	patch_version;
+	__le32	ram_version;
+	__le32	ref_clock;
+	__u8	reserved[4];
+} __packed;
 
-	fw_ptr = fw->data;
-	fw_size = fw->size;
-
-	while (fw_size >= sizeof(*cmd)) {
-		cmd = (struct hci_command_hdr *)fw_ptr;
-		fw_ptr += sizeof(*cmd);
-		fw_size -= sizeof(*cmd);
-
-		if (fw_size < cmd->plen) {
-			BT_ERR("%s: BCM: patch %s is corrupted",
-			       hdev->name, fw_name);
-			ret = -EINVAL;
-			goto reset_fw;
-		}
+struct qca_rampatch_version {
+	__le16	rom_version;
+	__le16	patch_version;
+} __packed;
 
-		cmd_param = fw_ptr;
-		fw_ptr += cmd->plen;
-		fw_size -= cmd->plen;
+struct qca_device_info {
+	u32	rom_version;
+	u8	rampatch_hdr;	/* length of header in rampatch */
+	u8	nvm_hdr;	/* length of header in NVM */
+	u8	ver_offset;	/* offset of version structure in rampatch */
+};
 
-		opcode = le16_to_cpu(cmd->opcode);
+static const struct qca_device_info qca_devices_table[] = {
+	{ 0x00000100, 20, 4, 10 }, /* Rome 1.0 */
+	{ 0x00000101, 20, 4, 10 }, /* Rome 1.1 */
+	{ 0x00000201, 28, 4, 18 }, /* Rome 2.1 */
+	{ 0x00000300, 28, 4, 18 }, /* Rome 3.0 */
+	{ 0x00000302, 28, 4, 18 }, /* Rome 3.2 */
+};
 
-		skb = __hci_cmd_sync(hdev, opcode, cmd->plen, cmd_param,
-				     HCI_INIT_TIMEOUT);
-		if (IS_ERR(skb)) {
-			ret = PTR_ERR(skb);
-			BT_ERR("%s: BCM: patch command %04x failed (%ld)",
-			       hdev->name, opcode, ret);
-			goto reset_fw;
-		}
-		kfree_skb(skb);
-	}
+static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request,
+				     void *data, u16 size)
+{
+	struct btusb_data *btdata = hci_get_drvdata(hdev);
+	struct usb_device *udev = btdata->udev;
+	int pipe, err;
+	u8 *buf;
 
-	/* 250 msec delay after Launch Ram completes */
-	msleep(250);
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
 
-reset_fw:
-	/* Reset */
-	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_RESET failed (%ld)", hdev->name, ret);
+	/* Found some of USB hosts have IOT issues with ours so that we should
+	 * not wait until HCI layer is ready.
+	 */
+	pipe = usb_rcvctrlpipe(udev, 0);
+	err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN,
+			      0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err);
 		goto done;
 	}
-	kfree_skb(skb);
 
-	/* Read Local Version Info */
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
-		       hdev->name, ret);
-		goto done;
-	}
+	memcpy(data, buf, size);
 
-	if (skb->len != sizeof(*ver)) {
-		BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
-		       hdev->name);
-		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
-	}
+done:
+	kfree(buf);
 
-	ver = (struct hci_rp_read_local_version *)skb->data;
-	BT_INFO("%s: BCM: firmware hci_ver=%02x hci_rev=%04x lmp_ver=%02x "
-		"lmp_subver=%04x", hdev->name, ver->hci_ver, ver->hci_rev,
-		ver->lmp_ver, ver->lmp_subver);
-	kfree_skb(skb);
+	return err;
+}
 
-	/* Read BD Address */
-	skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
-			     HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
-		       hdev->name, ret);
+static int btusb_setup_qca_download_fw(struct hci_dev *hdev,
+				       const struct firmware *firmware,
+				       size_t hdr_size)
+{
+	struct btusb_data *btdata = hci_get_drvdata(hdev);
+	struct usb_device *udev = btdata->udev;
+	size_t count, size, sent = 0;
+	int pipe, len, err;
+	u8 *buf;
+
+	buf = kmalloc(QCA_DFU_PACKET_LEN, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	count = firmware->size;
+
+	size = min_t(size_t, count, hdr_size);
+	memcpy(buf, firmware->data, size);
+
+	/* USB patches should go down to controller through USB path
+	 * because binary format fits to go down through USB channel.
+	 * USB control path is for patching headers and USB bulk is for
+	 * patch body.
+	 */
+	pipe = usb_sndctrlpipe(udev, 0);
+	err = usb_control_msg(udev, pipe, QCA_DFU_DOWNLOAD, USB_TYPE_VENDOR,
+			      0, 0, buf, size, USB_CTRL_SET_TIMEOUT);
+	if (err < 0) {
+		BT_ERR("%s: Failed to send headers (%d)", hdev->name, err);
 		goto done;
 	}
 
-	if (skb->len != sizeof(*bda)) {
-		BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
-		       hdev->name);
-		kfree_skb(skb);
-		ret = -EIO;
-		goto done;
+	sent += size;
+	count -= size;
+
+	while (count) {
+		size = min_t(size_t, count, QCA_DFU_PACKET_LEN);
+
+		memcpy(buf, firmware->data + sent, size);
+
+		pipe = usb_sndbulkpipe(udev, 0x02);
+		err = usb_bulk_msg(udev, pipe, buf, size, &len,
+				   QCA_DFU_TIMEOUT);
+		if (err < 0) {
+			BT_ERR("%s: Failed to send body at %zd of %zd (%d)",
+			       hdev->name, sent, firmware->size, err);
+			break;
+		}
+
+		if (size != len) {
+			BT_ERR("%s: Failed to get bulk buffer", hdev->name);
+			err = -EILSEQ;
+			break;
+		}
+
+		sent  += size;
+		count -= size;
 	}
 
-	bda = (struct hci_rp_read_bd_addr *)skb->data;
-	if (bda->status) {
-		BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
-		       hdev->name, bda->status);
-		kfree_skb(skb);
-		ret = -bt_to_errno(bda->status);
-		goto done;
+done:
+	kfree(buf);
+	return err;
+}
+
+static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
+					 struct qca_version *ver,
+					 const struct qca_device_info *info)
+{
+	struct qca_rampatch_version *rver;
+	const struct firmware *fw;
+	u32 ver_rom, ver_patch;
+	u16 rver_rom, rver_patch;
+	char fwname[64];
+	int err;
+
+	ver_rom = le32_to_cpu(ver->rom_version);
+	ver_patch = le32_to_cpu(ver->patch_version);
+
+	snprintf(fwname, sizeof(fwname), "qca/rampatch_usb_%08x.bin", ver_rom);
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err) {
+		BT_ERR("%s: failed to request rampatch file: %s (%d)",
+		       hdev->name, fwname, err);
+		return err;
 	}
 
-	/* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
-	 * with no configured address.
-	 */
-	if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
-		BT_INFO("%s: BCM: using default device address (%pMR)",
-			hdev->name, &bda->bdaddr);
-		set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+	BT_INFO("%s: using rampatch file: %s", hdev->name, fwname);
+
+	rver = (struct qca_rampatch_version *)(fw->data + info->ver_offset);
+	rver_rom = le16_to_cpu(rver->rom_version);
+	rver_patch = le16_to_cpu(rver->patch_version);
+
+	BT_INFO("%s: QCA: patch rome 0x%x build 0x%x, firmware rome 0x%x "
+		"build 0x%x", hdev->name, rver_rom, rver_patch, ver_rom,
+		ver_patch);
+
+	if (rver_rom != ver_rom || rver_patch <= ver_patch) {
+		BT_ERR("%s: rampatch file version did not match with firmware",
+		       hdev->name);
+		err = -EINVAL;
+		goto done;
 	}
 
-	kfree_skb(skb);
+	err = btusb_setup_qca_download_fw(hdev, fw, info->rampatch_hdr);
 
 done:
 	release_firmware(fw);
 
-	return ret;
+	return err;
 }
 
-static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
+				    struct qca_version *ver,
+				    const struct qca_device_info *info)
 {
-	struct sk_buff *skb;
-	long ret;
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
 
-	skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: BCM: Change address command failed (%ld)",
-		       hdev->name, ret);
-		return ret;
+	snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
+		 le32_to_cpu(ver->rom_version));
+
+	err = request_firmware(&fw, fwname, &hdev->dev);
+	if (err) {
+		BT_ERR("%s: failed to request NVM file: %s (%d)",
+		       hdev->name, fwname, err);
+		return err;
 	}
-	kfree_skb(skb);
 
-	return 0;
+	BT_INFO("%s: using NVM file: %s", hdev->name, fwname);
+
+	err = btusb_setup_qca_download_fw(hdev, fw, info->nvm_hdr);
+
+	release_firmware(fw);
+
+	return err;
 }
 
-static int btusb_set_bdaddr_ath3012(struct hci_dev *hdev,
-				    const bdaddr_t *bdaddr)
+static int btusb_setup_qca(struct hci_dev *hdev)
 {
-	struct sk_buff *skb;
-	u8 buf[10];
-	long ret;
+	const struct qca_device_info *info = NULL;
+	struct qca_version ver;
+	u32 ver_rom;
+	u8 status;
+	int i, err;
 
-	buf[0] = 0x01;
-	buf[1] = 0x01;
-	buf[2] = 0x00;
-	buf[3] = sizeof(bdaddr_t);
-	memcpy(buf + 4, bdaddr, sizeof(bdaddr_t));
+	err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver,
+				        sizeof(ver));
+	if (err < 0)
+		return err;
 
-	skb = __hci_cmd_sync(hdev, 0xfc0b, sizeof(buf), buf, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		ret = PTR_ERR(skb);
-		BT_ERR("%s: Change address command failed (%ld)",
-		       hdev->name, ret);
-		return ret;
+	ver_rom = le32_to_cpu(ver.rom_version);
+	for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) {
+		if (ver_rom == qca_devices_table[i].rom_version)
+			info = &qca_devices_table[i];
+	}
+	if (!info) {
+		BT_ERR("%s: don't support firmware rome 0x%x", hdev->name,
+		       ver_rom);
+		return -ENODEV;
+	}
+
+	err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status,
+					sizeof(status));
+	if (err < 0)
+		return err;
+
+	if (!(status & QCA_PATCH_UPDATED)) {
+		err = btusb_setup_qca_load_rampatch(hdev, &ver, info);
+		if (err < 0)
+			return err;
+	}
+
+	if (!(status & QCA_SYSCFG_UPDATED)) {
+		err = btusb_setup_qca_load_nvm(hdev, &ver, info);
+		if (err < 0)
+			return err;
 	}
-	kfree_skb(skb);
 
 	return 0;
 }
@@ -2701,23 +2728,29 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_BCM92035)
 		hdev->setup = btusb_setup_bcm92035;
 
+#ifdef CONFIG_BT_HCIBTUSB_BCM
 	if (id->driver_info & BTUSB_BCM_PATCHRAM) {
-		hdev->setup = btusb_setup_bcm_patchram;
-		hdev->set_bdaddr = btusb_set_bdaddr_bcm;
-		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+		hdev->setup = btbcm_setup_patchram;
+		hdev->set_bdaddr = btbcm_set_bdaddr;
 	}
 
+	if (id->driver_info & BTUSB_BCM_APPLE)
+		hdev->setup = btbcm_setup_apple;
+#endif
+
 	if (id->driver_info & BTUSB_INTEL) {
 		hdev->setup = btusb_setup_intel;
-		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+		hdev->shutdown = btusb_shutdown_intel;
+		hdev->set_bdaddr = btintel_set_bdaddr;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_INTEL_NEW) {
 		hdev->send = btusb_send_frame_intel;
 		hdev->setup = btusb_setup_intel_new;
 		hdev->hw_error = btusb_hw_error_intel;
-		hdev->set_bdaddr = btusb_set_bdaddr_intel;
+		hdev->set_bdaddr = btintel_set_bdaddr;
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
 
@@ -2734,9 +2767,15 @@ static int btusb_probe(struct usb_interface *intf,
 
 	if (id->driver_info & BTUSB_ATH3012) {
 		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 		set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
 	}
 
+	if (id->driver_info & BTUSB_QCA_ROME) {
+		data->setup_on_usb = btusb_setup_qca;
+		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
+	}
+
 	if (id->driver_info & BTUSB_AMP) {
 		/* AMP controllers do not support SCO packets */
 		data->isoc = NULL;
@@ -2772,6 +2811,8 @@ static int btusb_probe(struct usb_interface *intf,
 		/* Fake CSR devices with broken commands */
 		if (bcdDevice <= 0x100)
 			hdev->setup = btusb_setup_csr;
+
+		set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
 	}
 
 	if (id->driver_info & BTUSB_SNIFFER) {
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index 9c4dcf4c62ea..1b3f8647ea2f 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -45,6 +45,7 @@ struct ath_struct {
 	struct hci_uart *hu;
 	unsigned int cur_sleep;
 
+	struct sk_buff *rx_skb;
 	struct sk_buff_head txq;
 	struct work_struct ctxtsw;
 };
@@ -136,6 +137,8 @@ static int ath_close(struct hci_uart *hu)
 
 	skb_queue_purge(&ath->txq);
 
+	kfree_skb(ath->rx_skb);
+
 	cancel_work_sync(&ath->ctxtsw);
 
 	hu->priv = NULL;
@@ -187,40 +190,42 @@ static struct sk_buff *ath_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&ath->txq);
 }
 
+static const struct h4_recv_pkt ath_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
 /* Recv data */
-static int ath_recv(struct hci_uart *hu, void *data, int count)
+static int ath_recv(struct hci_uart *hu, const void *data, int count)
 {
-	int ret;
+	struct ath_struct *ath = hu->priv;
 
-	ret = hci_recv_stream_fragment(hu->hdev, data, count);
-	if (ret < 0) {
-		BT_ERR("Frame Reassembly Failed");
-		return ret;
+	ath->rx_skb = h4_recv_buf(hu->hdev, ath->rx_skb, data, count,
+				  ath_recv_pkts, ARRAY_SIZE(ath_recv_pkts));
+	if (IS_ERR(ath->rx_skb)) {
+		int err = PTR_ERR(ath->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		return err;
 	}
 
 	return count;
 }
 
-static struct hci_uart_proto athp = {
-	.id = HCI_UART_ATH3K,
-	.open = ath_open,
-	.close = ath_close,
-	.recv = ath_recv,
-	.enqueue = ath_enqueue,
-	.dequeue = ath_dequeue,
-	.flush = ath_flush,
+static const struct hci_uart_proto athp = {
+	.id		= HCI_UART_ATH3K,
+	.name		= "ATH3K",
+	.open		= ath_open,
+	.close		= ath_close,
+	.recv		= ath_recv,
+	.enqueue	= ath_enqueue,
+	.dequeue	= ath_dequeue,
+	.flush		= ath_flush,
 };
 
 int __init ath_init(void)
 {
-	int err = hci_uart_register_proto(&athp);
-
-	if (!err)
-		BT_INFO("HCIATH3K protocol initialized");
-	else
-		BT_ERR("HCIATH3K protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&athp);
 }
 
 int __exit ath_deinit(void)
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
new file mode 100644
index 000000000000..1ec0b4a5ffa6
--- /dev/null
+++ b/drivers/bluetooth/hci_bcm.c
@@ -0,0 +1,153 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Broadcom devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btbcm.h"
+#include "hci_uart.h"
+
+struct bcm_data {
+	struct sk_buff *rx_skb;
+	struct sk_buff_head txq;
+};
+
+static int bcm_open(struct hci_uart *hu)
+{
+	struct bcm_data *bcm;
+
+	BT_DBG("hu %p", hu);
+
+	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
+	if (!bcm)
+		return -ENOMEM;
+
+	skb_queue_head_init(&bcm->txq);
+
+	hu->priv = bcm;
+	return 0;
+}
+
+static int bcm_close(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&bcm->txq);
+	kfree_skb(bcm->rx_skb);
+	kfree(bcm);
+
+	hu->priv = NULL;
+	return 0;
+}
+
+static int bcm_flush(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	BT_DBG("hu %p", hu);
+
+	skb_queue_purge(&bcm->txq);
+
+	return 0;
+}
+
+static int bcm_setup(struct hci_uart *hu)
+{
+	BT_DBG("hu %p", hu);
+
+	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
+
+	return btbcm_setup_patchram(hu->hdev);
+}
+
+static const struct h4_recv_pkt bcm_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
+static int bcm_recv(struct hci_uart *hu, const void *data, int count)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
+		return -EUNATCH;
+
+	bcm->rx_skb = h4_recv_buf(hu->hdev, bcm->rx_skb, data, count,
+				  bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
+	if (IS_ERR(bcm->rx_skb)) {
+		int err = PTR_ERR(bcm->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		return err;
+	}
+
+	return count;
+}
+
+static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	BT_DBG("hu %p skb %p", hu, skb);
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
+	skb_queue_tail(&bcm->txq, skb);
+
+	return 0;
+}
+
+static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+
+	return skb_dequeue(&bcm->txq);
+}
+
+static const struct hci_uart_proto bcm_proto = {
+	.id		= HCI_UART_BCM,
+	.name		= "BCM",
+	.open		= bcm_open,
+	.close		= bcm_close,
+	.flush		= bcm_flush,
+	.setup		= bcm_setup,
+	.recv		= bcm_recv,
+	.enqueue	= bcm_enqueue,
+	.dequeue	= bcm_dequeue,
+};
+
+int __init bcm_init(void)
+{
+	return hci_uart_register_proto(&bcm_proto);
+}
+
+int __exit bcm_deinit(void)
+{
+	return hci_uart_unregister_proto(&bcm_proto);
+}
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 21cc45b34f13..dc8e3d4356a0 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -47,8 +47,6 @@
 
 #include "hci_uart.h"
 
-#define VERSION "0.3"
-
 static bool txcrc = 1;
 static bool hciextn = 1;
 
@@ -554,10 +552,10 @@ static u16 bscp_get_crc(struct bcsp_struct *bcsp)
 }
 
 /* Recv data */
-static int bcsp_recv(struct hci_uart *hu, void *data, int count)
+static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
 {
 	struct bcsp_struct *bcsp = hu->priv;
-	unsigned char *ptr;
+	const unsigned char *ptr;
 
 	BT_DBG("hu %p count %d rx_state %d rx_count %ld", 
 		hu, count, bcsp->rx_state, bcsp->rx_count);
@@ -735,8 +733,9 @@ static int bcsp_close(struct hci_uart *hu)
 	return 0;
 }
 
-static struct hci_uart_proto bcsp = {
+static const struct hci_uart_proto bcsp = {
 	.id		= HCI_UART_BCSP,
+	.name		= "BCSP",
 	.open		= bcsp_open,
 	.close		= bcsp_close,
 	.enqueue	= bcsp_enqueue,
@@ -747,14 +746,7 @@ static struct hci_uart_proto bcsp = {
 
 int __init bcsp_init(void)
 {
-	int err = hci_uart_register_proto(&bcsp);
-
-	if (!err)
-		BT_INFO("HCI BCSP protocol initialized");
-	else
-		BT_ERR("HCI BCSP protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&bcsp);
 }
 
 int __exit bcsp_deinit(void)
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index 66db9a803373..f7190f01e135 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -40,17 +40,14 @@
 #include <linux/signal.h>
 #include <linux/ioctl.h>
 #include <linux/skbuff.h>
+#include <asm/unaligned.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
 #include "hci_uart.h"
 
-#define VERSION "1.2"
-
 struct h4_struct {
-	unsigned long rx_state;
-	unsigned long rx_count;
 	struct sk_buff *rx_skb;
 	struct sk_buff_head txq;
 };
@@ -117,18 +114,26 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 	return 0;
 }
 
+static const struct h4_recv_pkt h4_recv_pkts[] = {
+	{ H4_RECV_ACL,   .recv = hci_recv_frame },
+	{ H4_RECV_SCO,   .recv = hci_recv_frame },
+	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+};
+
 /* Recv data */
-static int h4_recv(struct hci_uart *hu, void *data, int count)
+static int h4_recv(struct hci_uart *hu, const void *data, int count)
 {
-	int ret;
+	struct h4_struct *h4 = hu->priv;
 
 	if (!test_bit(HCI_UART_REGISTERED, &hu->flags))
 		return -EUNATCH;
 
-	ret = hci_recv_stream_fragment(hu->hdev, data, count);
-	if (ret < 0) {
-		BT_ERR("Frame Reassembly Failed");
-		return ret;
+	h4->rx_skb = h4_recv_buf(hu->hdev, h4->rx_skb, data, count,
+				 h4_recv_pkts, ARRAY_SIZE(h4_recv_pkts));
+	if (IS_ERR(h4->rx_skb)) {
+		int err = PTR_ERR(h4->rx_skb);
+		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		return err;
 	}
 
 	return count;
@@ -140,8 +145,9 @@ static struct sk_buff *h4_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&h4->txq);
 }
 
-static struct hci_uart_proto h4p = {
+static const struct hci_uart_proto h4p = {
 	.id		= HCI_UART_H4,
+	.name		= "H4",
 	.open		= h4_open,
 	.close		= h4_close,
 	.recv		= h4_recv,
@@ -152,17 +158,105 @@ static struct hci_uart_proto h4p = {
 
 int __init h4_init(void)
 {
-	int err = hci_uart_register_proto(&h4p);
-
-	if (!err)
-		BT_INFO("HCI H4 protocol initialized");
-	else
-		BT_ERR("HCI H4 protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&h4p);
 }
 
 int __exit h4_deinit(void)
 {
 	return hci_uart_unregister_proto(&h4p);
 }
+
+struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
+			    const unsigned char *buffer, int count,
+			    const struct h4_recv_pkt *pkts, int pkts_count)
+{
+	while (count) {
+		int i, len;
+
+		if (!skb) {
+			for (i = 0; i < pkts_count; i++) {
+				if (buffer[0] != (&pkts[i])->type)
+					continue;
+
+				skb = bt_skb_alloc((&pkts[i])->maxlen,
+						   GFP_ATOMIC);
+				if (!skb)
+					return ERR_PTR(-ENOMEM);
+
+				bt_cb(skb)->pkt_type = (&pkts[i])->type;
+				bt_cb(skb)->expect = (&pkts[i])->hlen;
+				break;
+			}
+
+			/* Check for invalid packet type */
+			if (!skb)
+				return ERR_PTR(-EILSEQ);
+
+			count -= 1;
+			buffer += 1;
+		}
+
+		len = min_t(uint, bt_cb(skb)->expect - skb->len, count);
+		memcpy(skb_put(skb, len), buffer, len);
+
+		count -= len;
+		buffer += len;
+
+		/* Check for partial packet */
+		if (skb->len < bt_cb(skb)->expect)
+			continue;
+
+		for (i = 0; i < pkts_count; i++) {
+			if (bt_cb(skb)->pkt_type == (&pkts[i])->type)
+				break;
+		}
+
+		if (i >= pkts_count) {
+			kfree_skb(skb);
+			return ERR_PTR(-EILSEQ);
+		}
+
+		if (skb->len == (&pkts[i])->hlen) {
+			u16 dlen;
+
+			switch ((&pkts[i])->lsize) {
+			case 0:
+				/* No variable data length */
+				(&pkts[i])->recv(hdev, skb);
+				skb = NULL;
+				break;
+			case 1:
+				/* Single octet variable length */
+				dlen = skb->data[(&pkts[i])->loff];
+				bt_cb(skb)->expect += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			case 2:
+				/* Double octet variable length */
+				dlen = get_unaligned_le16(skb->data +
+							  (&pkts[i])->loff);
+				bt_cb(skb)->expect += dlen;
+
+				if (skb_tailroom(skb) < dlen) {
+					kfree_skb(skb);
+					return ERR_PTR(-EMSGSIZE);
+				}
+				break;
+			default:
+				/* Unsupported variable length */
+				kfree_skb(skb);
+				return ERR_PTR(-EILSEQ);
+			}
+		} else {
+			/* Complete frame */
+			(&pkts[i])->recv(hdev, skb);
+			skb = NULL;
+		}
+	}
+
+	return skb;
+}
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index ec0fa7732c0d..3455cecc9ecf 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -511,10 +511,10 @@ static void h5_reset_rx(struct h5 *h5)
 	clear_bit(H5_RX_ESC, &h5->flags);
 }
 
-static int h5_recv(struct hci_uart *hu, void *data, int count)
+static int h5_recv(struct hci_uart *hu, const void *data, int count)
 {
 	struct h5 *h5 = hu->priv;
-	unsigned char *ptr = data;
+	const unsigned char *ptr = data;
 
 	BT_DBG("%s pending %zu count %d", hu->hdev->name, h5->rx_pending,
 	       count);
@@ -743,8 +743,9 @@ static int h5_flush(struct hci_uart *hu)
 	return 0;
 }
 
-static struct hci_uart_proto h5p = {
+static const struct hci_uart_proto h5p = {
 	.id		= HCI_UART_3WIRE,
+	.name		= "Three-wire (H5)",
 	.open		= h5_open,
 	.close		= h5_close,
 	.recv		= h5_recv,
@@ -755,14 +756,7 @@ static struct hci_uart_proto h5p = {
 
 int __init h5_init(void)
 {
-	int err = hci_uart_register_proto(&h5p);
-
-	if (!err)
-		BT_INFO("HCI Three-wire UART (H5) protocol initialized");
-	else
-		BT_ERR("HCI Three-wire UART (H5) protocol init failed");
-
-	return err;
+	return hci_uart_register_proto(&h5p);
 }
 
 int __exit h5_deinit(void)
diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
new file mode 100644
index 000000000000..5dd07bf05236
--- /dev/null
+++ b/drivers/bluetooth/hci_intel.c
@@ -0,0 +1,31 @@
+/*
+ *
+ *  Bluetooth HCI UART driver for Intel devices
+ *
+ *  Copyright (C) 2015  Intel Corporation
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/skbuff.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "hci_uart.h"
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index dc487b5d1156..5c9a73f02664 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -44,13 +44,15 @@
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
+#include "btintel.h"
+#include "btbcm.h"
 #include "hci_uart.h"
 
-#define VERSION "2.2"
+#define VERSION "2.3"
 
-static struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
+static const struct hci_uart_proto *hup[HCI_UART_MAX_PROTO];
 
-int hci_uart_register_proto(struct hci_uart_proto *p)
+int hci_uart_register_proto(const struct hci_uart_proto *p)
 {
 	if (p->id >= HCI_UART_MAX_PROTO)
 		return -EINVAL;
@@ -60,10 +62,12 @@ int hci_uart_register_proto(struct hci_uart_proto *p)
 
 	hup[p->id] = p;
 
+	BT_INFO("HCI UART protocol %s registered", p->name);
+
 	return 0;
 }
 
-int hci_uart_unregister_proto(struct hci_uart_proto *p)
+int hci_uart_unregister_proto(const struct hci_uart_proto *p)
 {
 	if (p->id >= HCI_UART_MAX_PROTO)
 		return -EINVAL;
@@ -76,7 +80,7 @@ int hci_uart_unregister_proto(struct hci_uart_proto *p)
 	return 0;
 }
 
-static struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
+static const struct hci_uart_proto *hci_uart_get_proto(unsigned int id)
 {
 	if (id >= HCI_UART_MAX_PROTO)
 		return NULL;
@@ -261,6 +265,54 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 	return 0;
 }
 
+static int hci_uart_setup(struct hci_dev *hdev)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct hci_rp_read_local_version *ver;
+	struct sk_buff *skb;
+
+	if (hu->proto->setup)
+		return hu->proto->setup(hu);
+
+	if (!test_bit(HCI_UART_VND_DETECT, &hu->hdev_flags))
+		return 0;
+
+	skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s: Reading local version information failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return 0;
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s: Event length mismatch for version information",
+		       hdev->name);
+		goto done;
+	}
+
+	ver = (struct hci_rp_read_local_version *)skb->data;
+
+	switch (le16_to_cpu(ver->manufacturer)) {
+#ifdef CONFIG_BT_HCIUART_INTEL
+	case 2:
+		hdev->set_bdaddr = btintel_set_bdaddr;
+		btintel_check_bdaddr(hdev);
+		break;
+#endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	case 15:
+		hdev->set_bdaddr = btbcm_set_bdaddr;
+		btbcm_check_bdaddr(hdev);
+		break;
+#endif
+	}
+
+done:
+	kfree_skb(skb);
+	return 0;
+}
+
 /* ------ LDISC part ------ */
 /* hci_uart_tty_open
  *
@@ -316,7 +368,7 @@ static int hci_uart_tty_open(struct tty_struct *tty)
  */
 static void hci_uart_tty_close(struct tty_struct *tty)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 	struct hci_dev *hdev;
 
 	BT_DBG("tty %p", tty);
@@ -355,7 +407,7 @@ static void hci_uart_tty_close(struct tty_struct *tty)
  */
 static void hci_uart_tty_wakeup(struct tty_struct *tty)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 
 	BT_DBG("");
 
@@ -383,9 +435,10 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
  *
  * Return Value:    None
  */
-static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *flags, int count)
+static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
+				 char *flags, int count)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 
 	if (!hu || tty != hu->tty)
 		return;
@@ -394,7 +447,7 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, char *f
 		return;
 
 	spin_lock(&hu->rx_lock);
-	hu->proto->recv(hu, (void *) data, count);
+	hu->proto->recv(hu, data, count);
 
 	if (hu->hdev)
 		hu->hdev->stat.byte_rx += count;
@@ -426,6 +479,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 	hdev->close = hci_uart_close;
 	hdev->flush = hci_uart_flush;
 	hdev->send  = hci_uart_send_frame;
+	hdev->setup = hci_uart_setup;
 	SET_HCIDEV_DEV(hdev, hu->tty->dev);
 
 	if (test_bit(HCI_UART_RAW_DEVICE, &hu->hdev_flags))
@@ -458,7 +512,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
 
 static int hci_uart_set_proto(struct hci_uart *hu, int id)
 {
-	struct hci_uart_proto *p;
+	const struct hci_uart_proto *p;
 	int err;
 
 	p = hci_uart_get_proto(id);
@@ -486,9 +540,10 @@ static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
 				    BIT(HCI_UART_RESET_ON_INIT) |
 				    BIT(HCI_UART_CREATE_AMP) |
 				    BIT(HCI_UART_INIT_PENDING) |
-				    BIT(HCI_UART_EXT_CONFIG);
+				    BIT(HCI_UART_EXT_CONFIG) |
+				    BIT(HCI_UART_VND_DETECT);
 
-	if ((flags & ~valid_flags))
+	if (flags & ~valid_flags)
 		return -EINVAL;
 
 	hu->hdev_flags = flags;
@@ -509,10 +564,10 @@ static int hci_uart_set_flags(struct hci_uart *hu, unsigned long flags)
  *
  * Return Value:    Command dependent
  */
-static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
-					unsigned int cmd, unsigned long arg)
+static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
+			      unsigned int cmd, unsigned long arg)
 {
-	struct hci_uart *hu = (void *)tty->disc_data;
+	struct hci_uart *hu = tty->disc_data;
 	int err = 0;
 
 	BT_DBG("");
@@ -566,19 +621,19 @@ static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
  * We don't provide read/write/poll interface for user space.
  */
 static ssize_t hci_uart_tty_read(struct tty_struct *tty, struct file *file,
-					unsigned char __user *buf, size_t nr)
+				 unsigned char __user *buf, size_t nr)
 {
 	return 0;
 }
 
 static ssize_t hci_uart_tty_write(struct tty_struct *tty, struct file *file,
-					const unsigned char *data, size_t count)
+				  const unsigned char *data, size_t count)
 {
 	return 0;
 }
 
 static unsigned int hci_uart_tty_poll(struct tty_struct *tty,
-					struct file *filp, poll_table *wait)
+				      struct file *filp, poll_table *wait)
 {
 	return 0;
 }
@@ -626,6 +681,9 @@ static int __init hci_uart_init(void)
 #ifdef CONFIG_BT_HCIUART_3WIRE
 	h5_init();
 #endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	bcm_init();
+#endif
 
 	return 0;
 }
@@ -649,6 +707,9 @@ static void __exit hci_uart_exit(void)
 #ifdef CONFIG_BT_HCIUART_3WIRE
 	h5_deinit();
 #endif
+#ifdef CONFIG_BT_HCIUART_BCM
+	bcm_deinit();
+#endif
 
 	/* Release tty registration of line discipline */
 	err = tty_unregister_ldisc(N_HCI);
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 69a90b1b5ff5..9ee24b075f79 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -370,10 +370,10 @@ static inline int ll_check_data_len(struct hci_dev *hdev, struct ll_struct *ll,
 }
 
 /* Recv data */
-static int ll_recv(struct hci_uart *hu, void *data, int count)
+static int ll_recv(struct hci_uart *hu, const void *data, int count)
 {
 	struct ll_struct *ll = hu->priv;
-	char *ptr;
+	const char *ptr;
 	struct hci_event_hdr *eh;
 	struct hci_acl_hdr   *ah;
 	struct hci_sco_hdr   *sh;
@@ -505,8 +505,9 @@ static struct sk_buff *ll_dequeue(struct hci_uart *hu)
 	return skb_dequeue(&ll->txq);
 }
 
-static struct hci_uart_proto llp = {
+static const struct hci_uart_proto llp = {
 	.id		= HCI_UART_LL,
+	.name		= "LL",
 	.open		= ll_open,
 	.close		= ll_close,
 	.recv		= ll_recv,
@@ -517,14 +518,7 @@ static struct hci_uart_proto llp = {
 
 int __init ll_init(void)
 {
-	int err = hci_uart_register_proto(&llp);
-
-	if (!err)
-		BT_INFO("HCILL protocol initialized");
-	else
-		BT_ERR("HCILL protocol registration failed");
-
-	return err;
+	return hci_uart_register_proto(&llp);
 }
 
 int __exit ll_deinit(void)
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 247488edcbf9..72120a5ba13c 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -35,7 +35,7 @@
 #define HCIUARTGETFLAGS		_IOR('U', 204, int)
 
 /* UART protocols */
-#define HCI_UART_MAX_PROTO	6
+#define HCI_UART_MAX_PROTO	8
 
 #define HCI_UART_H4	0
 #define HCI_UART_BCSP	1
@@ -43,21 +43,26 @@
 #define HCI_UART_H4DS	3
 #define HCI_UART_LL	4
 #define HCI_UART_ATH3K	5
+#define HCI_UART_INTEL	6
+#define HCI_UART_BCM	7
 
 #define HCI_UART_RAW_DEVICE	0
 #define HCI_UART_RESET_ON_INIT	1
 #define HCI_UART_CREATE_AMP	2
 #define HCI_UART_INIT_PENDING	3
 #define HCI_UART_EXT_CONFIG	4
+#define HCI_UART_VND_DETECT	5
 
 struct hci_uart;
 
 struct hci_uart_proto {
 	unsigned int id;
+	const char *name;
 	int (*open)(struct hci_uart *hu);
 	int (*close)(struct hci_uart *hu);
 	int (*flush)(struct hci_uart *hu);
-	int (*recv)(struct hci_uart *hu, void *data, int len);
+	int (*setup)(struct hci_uart *hu);
+	int (*recv)(struct hci_uart *hu, const void *data, int len);
 	int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
 	struct sk_buff *(*dequeue)(struct hci_uart *hu);
 };
@@ -71,7 +76,7 @@ struct hci_uart {
 	struct work_struct	init_ready;
 	struct work_struct	write_work;
 
-	struct hci_uart_proto	*proto;
+	const struct hci_uart_proto *proto;
 	void			*priv;
 
 	struct sk_buff		*tx_skb;
@@ -87,14 +92,48 @@ struct hci_uart {
 #define HCI_UART_SENDING	1
 #define HCI_UART_TX_WAKEUP	2
 
-int hci_uart_register_proto(struct hci_uart_proto *p);
-int hci_uart_unregister_proto(struct hci_uart_proto *p);
+int hci_uart_register_proto(const struct hci_uart_proto *p);
+int hci_uart_unregister_proto(const struct hci_uart_proto *p);
 int hci_uart_tx_wakeup(struct hci_uart *hu);
 int hci_uart_init_ready(struct hci_uart *hu);
 
 #ifdef CONFIG_BT_HCIUART_H4
 int h4_init(void);
 int h4_deinit(void);
+
+struct h4_recv_pkt {
+	u8  type;	/* Packet type */
+	u8  hlen;	/* Header length */
+	u8  loff;	/* Data length offset in header */
+	u8  lsize;	/* Data length field size */
+	u16 maxlen;	/* Max overall packet length */
+	int (*recv)(struct hci_dev *hdev, struct sk_buff *skb);
+};
+
+#define H4_RECV_ACL \
+	.type = HCI_ACLDATA_PKT, \
+	.hlen = HCI_ACL_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 2, \
+	.maxlen = HCI_MAX_FRAME_SIZE \
+
+#define H4_RECV_SCO \
+	.type = HCI_SCODATA_PKT, \
+	.hlen = HCI_SCO_HDR_SIZE, \
+	.loff = 2, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_SCO_SIZE
+
+#define H4_RECV_EVENT \
+	.type = HCI_EVENT_PKT, \
+	.hlen = HCI_EVENT_HDR_SIZE, \
+	.loff = 1, \
+	.lsize = 1, \
+	.maxlen = HCI_MAX_EVENT_SIZE
+
+struct sk_buff *h4_recv_buf(struct hci_dev *hdev, struct sk_buff *skb,
+			    const unsigned char *buffer, int count,
+			    const struct h4_recv_pkt *pkts, int pkts_count);
 #endif
 
 #ifdef CONFIG_BT_HCIUART_BCSP
@@ -116,3 +155,8 @@ int ath_deinit(void);
 int h5_init(void);
 int h5_deinit(void);
 #endif
+
+#ifdef CONFIG_BT_HCIUART_BCM
+int bcm_init(void);
+int bcm_deinit(void);
+#endif