Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

Changes of note:

 1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.

 2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
    David Ahern.

 3) Allow the user to ask for the statistics to be filtered out of
    ipv4/ipv6 address netlink dumps.  From Sowmini Varadhan.

 4) More work to pass the network namespace context around deep into
    various packet path APIs, starting with the netfilter hooks.  From
    Eric W Biederman.

 5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
    Richter.

 6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.

 7) Support Very High Throughput in wireless MESH code, from Bob
    Copeland.

 8) Allow setting the ageing_time in switchdev/rocker.  From Scott
    Feldman.

 9) Properly autoload L2TP type modules, from Stephen Hemminger.

10) Fix and enable offload features by default in 8139cp driver, from
    David Woodhouse.

11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
    Jiri Benc.

12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
    Opstad.

13) Fix IPSEC flowcache overflows on large systems, from Steffen
    Klassert.

14) Convert bridging to track VLANs using rhashtable entries rather than
    a bitmap.  From Nikolay Aleksandrov.

15) Make TCP listener handling completely lockless, this is a major
    accomplishment.  Incoming request sockets now live in the
    established hash table just like any other socket too.

    From Eric Dumazet.

15) Provide more bridging attributes to netlink, from Nikolay
    Aleksandrov.

16) Use hash based algorithm for ipv4 multipath routing, this was very
    long overdue.  From Peter Nørlund.

17) Several y2038 cures, mostly avoiding timespec.  From Arnd Bergmann.

18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.

19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet.  This
    influences the port binding selection logic used by SO_REUSEPORT.

20) Add ipv6 support to VRF, from David Ahern.

21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.

22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.

23) Implement RACK loss recovery in TCP, from Yuchung Cheng.

24) Support multipath routes in MPLS, from Roopa Prabhu.

25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
    Dumazet.

26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
    Sudarsana Kalluru.

27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
    Sowa.

28) Support ipv6 geneve tunnels, from John W Linville.

29) Add flood control support to switchdev layer, from Ido Schimmel.

30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
    Hannes Frederic Sowa.

31) Support persistent maps and progs in bpf, from Daniel Borkmann.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
  sh_eth: use DMA barriers
  switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
  net: sched: kill dead code in sch_choke.c
  irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
  net: dsa: mv88e6xxx: include DSA ports in VLANs
  net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
  net/core: fix for_each_netdev_feature
  vlan: Invoke driver vlan hooks only if device is present
  arcnet/com20020: add LEDS_CLASS dependency
  bpf, verifier: annotate verbose printer with __printf
  dp83640: Only wait for timestamps for packets with timestamping enabled.
  ptp: Change ptp_class to a proper bitmask
  dp83640: Prune rx timestamp list before reading from it
  dp83640: Delay scheduled work.
  dp83640: Include hash in timestamp/packet matching
  ipv6: fix tunnel error handling
  net/mlx5e: Fix LSO vlan insertion
  net/mlx5e: Re-eanble client vlan TX acceleration
  net/mlx5e: Return error in case mlx5e_set_features() fails
  net/mlx5e: Don't allow more than max supported channels
  ...

1 files changed, 359 insertions, 87 deletions

diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 835bfab88ef5..cb852cc750b7 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -31,6 +31,9 @@
 #include <linux/clk.h>
 #include <linux/gpio/consumer.h>
 #include <linux/tty.h>
+#include <linux/interrupt.h>
+#include <linux/dmi.h>
+#include <linux/pm_runtime.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -38,6 +41,11 @@
 #include "btbcm.h"
 #include "hci_uart.h"
 
+#define BCM_LM_DIAG_PKT 0x07
+#define BCM_LM_DIAG_SIZE 63
+
+#define BCM_AUTOSUSPEND_DELAY	5000 /* default autosleep delay */
+
 struct bcm_device {
 	struct list_head	list;
 
@@ -51,8 +59,10 @@ struct bcm_device {
 	bool			clk_enabled;
 
 	u32			init_speed;
+	int			irq;
+	u8			irq_polarity;
 
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 	struct hci_uart		*hu;
 	bool			is_suspended; /* suspend/resume flag */
 #endif
@@ -66,7 +76,7 @@ struct bcm_data {
 };
 
 /* List of BCM BT UART devices */
-static DEFINE_SPINLOCK(bcm_device_lock);
+static DEFINE_MUTEX(bcm_device_lock);
 static LIST_HEAD(bcm_device_list);
 
 static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
@@ -80,7 +90,7 @@ static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
 
 		clock.type = BCM_UART_CLOCK_48MHZ;
 
-		BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+		bt_dev_dbg(hdev, "Set Controller clock (%d)", clock.type);
 
 		/* This Broadcom specific command changes the UART's controller
 		 * clock for baud rate > 3000000.
@@ -88,15 +98,15 @@ static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
 		skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
 		if (IS_ERR(skb)) {
 			int err = PTR_ERR(skb);
-			BT_ERR("%s: BCM: failed to write clock command (%d)",
-			       hdev->name, err);
+			bt_dev_err(hdev, "BCM: failed to write clock (%d)",
+				   err);
 			return err;
 		}
 
 		kfree_skb(skb);
 	}
 
-	BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+	bt_dev_dbg(hdev, "Set Controller UART speed to %d bit/s", speed);
 
 	param.zero = cpu_to_le16(0);
 	param.baud_rate = cpu_to_le32(speed);
@@ -108,8 +118,8 @@ static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
 			     HCI_INIT_TIMEOUT);
 	if (IS_ERR(skb)) {
 		int err = PTR_ERR(skb);
-		BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
-		       hdev->name, err);
+		bt_dev_err(hdev, "BCM: failed to write update baudrate (%d)",
+			   err);
 		return err;
 	}
 
@@ -149,12 +159,125 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static irqreturn_t bcm_host_wake(int irq, void *data)
+{
+	struct bcm_device *bdev = data;
+
+	bt_dev_dbg(bdev, "Host wake IRQ");
+
+	pm_runtime_get(&bdev->pdev->dev);
+	pm_runtime_mark_last_busy(&bdev->pdev->dev);
+	pm_runtime_put_autosuspend(&bdev->pdev->dev);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_request_irq(struct bcm_data *bcm)
+{
+	struct bcm_device *bdev = bcm->dev;
+	int err = 0;
+
+	/* If this is not a platform device, do not enable PM functionalities */
+	mutex_lock(&bcm_device_lock);
+	if (!bcm_device_exists(bdev)) {
+		err = -ENODEV;
+		goto unlock;
+	}
+
+	if (bdev->irq > 0) {
+		err = devm_request_irq(&bdev->pdev->dev, bdev->irq,
+				       bcm_host_wake, IRQF_TRIGGER_RISING,
+				       "host_wake", bdev);
+		if (err)
+			goto unlock;
+
+		device_init_wakeup(&bdev->pdev->dev, true);
+
+		pm_runtime_set_autosuspend_delay(&bdev->pdev->dev,
+						 BCM_AUTOSUSPEND_DELAY);
+		pm_runtime_use_autosuspend(&bdev->pdev->dev);
+		pm_runtime_set_active(&bdev->pdev->dev);
+		pm_runtime_enable(&bdev->pdev->dev);
+	}
+
+unlock:
+	mutex_unlock(&bcm_device_lock);
+
+	return err;
+}
+
+static const struct bcm_set_sleep_mode default_sleep_params = {
+	.sleep_mode = 1,	/* 0=Disabled, 1=UART, 2=Reserved, 3=USB */
+	.idle_host = 2,		/* idle threshold HOST, in 300ms */
+	.idle_dev = 2,		/* idle threshold device, in 300ms */
+	.bt_wake_active = 1,	/* BT_WAKE active mode: 1 = high, 0 = low */
+	.host_wake_active = 0,	/* HOST_WAKE active mode: 1 = high, 0 = low */
+	.allow_host_sleep = 1,	/* Allow host sleep in SCO flag */
+	.combine_modes = 1,	/* Combine sleep and LPM flag */
+	.tristate_control = 0,	/* Allow tri-state control of UART tx flag */
+	/* Irrelevant USB flags */
+	.usb_auto_sleep = 0,
+	.usb_resume_timeout = 0,
+	.pulsed_host_wake = 0,
+	.break_to_host = 0
+};
+
+static int bcm_setup_sleep(struct hci_uart *hu)
+{
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+	struct bcm_set_sleep_mode sleep_params = default_sleep_params;
+
+	sleep_params.host_wake_active = !bcm->dev->irq_polarity;
+
+	skb = __hci_cmd_sync(hu->hdev, 0xfc27, sizeof(sleep_params),
+			     &sleep_params, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		int err = PTR_ERR(skb);
+		bt_dev_err(hu->hdev, "Sleep VSC failed (%d)", err);
+		return err;
+	}
+	kfree_skb(skb);
+
+	bt_dev_dbg(hu->hdev, "Set Sleep Parameters VSC succeeded");
+
+	return 0;
+}
+#else
+static inline int bcm_request_irq(struct bcm_data *bcm) { return 0; }
+static inline int bcm_setup_sleep(struct hci_uart *hu) { return 0; }
+#endif
+
+static int bcm_set_diag(struct hci_dev *hdev, bool enable)
+{
+	struct hci_uart *hu = hci_get_drvdata(hdev);
+	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb;
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -ENETDOWN;
+
+	skb = bt_skb_alloc(3, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	*skb_put(skb, 1) = BCM_LM_DIAG_PKT;
+	*skb_put(skb, 1) = 0xf0;
+	*skb_put(skb, 1) = enable;
+
+	skb_queue_tail(&bcm->txq, skb);
+	hci_uart_tx_wakeup(hu);
+
+	return 0;
+}
+
 static int bcm_open(struct hci_uart *hu)
 {
 	struct bcm_data *bcm;
 	struct list_head *p;
 
-	BT_DBG("hu %p", hu);
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
 	bcm = kzalloc(sizeof(*bcm), GFP_KERNEL);
 	if (!bcm)
@@ -164,7 +287,7 @@ static int bcm_open(struct hci_uart *hu)
 
 	hu->priv = bcm;
 
-	spin_lock(&bcm_device_lock);
+	mutex_lock(&bcm_device_lock);
 	list_for_each(p, &bcm_device_list) {
 		struct bcm_device *dev = list_entry(p, struct bcm_device, list);
 
@@ -175,17 +298,15 @@ static int bcm_open(struct hci_uart *hu)
 		if (hu->tty->dev->parent == dev->pdev->dev.parent) {
 			bcm->dev = dev;
 			hu->init_speed = dev->init_speed;
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
 			dev->hu = hu;
 #endif
+			bcm_gpio_set_power(bcm->dev, true);
 			break;
 		}
 	}
 
-	if (bcm->dev)
-		bcm_gpio_set_power(bcm->dev, true);
-
-	spin_unlock(&bcm_device_lock);
+	mutex_unlock(&bcm_device_lock);
 
 	return 0;
 }
@@ -193,18 +314,27 @@ static int bcm_open(struct hci_uart *hu)
 static int bcm_close(struct hci_uart *hu)
 {
 	struct bcm_data *bcm = hu->priv;
+	struct bcm_device *bdev = bcm->dev;
 
-	BT_DBG("hu %p", hu);
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
 	/* Protect bcm->dev against removal of the device or driver */
-	spin_lock(&bcm_device_lock);
-	if (bcm_device_exists(bcm->dev)) {
-		bcm_gpio_set_power(bcm->dev, false);
-#ifdef CONFIG_PM_SLEEP
-		bcm->dev->hu = NULL;
+	mutex_lock(&bcm_device_lock);
+	if (bcm_device_exists(bdev)) {
+		bcm_gpio_set_power(bdev, false);
+#ifdef CONFIG_PM
+		pm_runtime_disable(&bdev->pdev->dev);
+		pm_runtime_set_suspended(&bdev->pdev->dev);
+
+		if (device_can_wakeup(&bdev->pdev->dev)) {
+			devm_free_irq(&bdev->pdev->dev, bdev->irq, bdev);
+			device_init_wakeup(&bdev->pdev->dev, false);
+		}
+
+		bdev->hu = NULL;
 #endif
 	}
-	spin_unlock(&bcm_device_lock);
+	mutex_unlock(&bcm_device_lock);
 
 	skb_queue_purge(&bcm->txq);
 	kfree_skb(bcm->rx_skb);
@@ -218,7 +348,7 @@ static int bcm_flush(struct hci_uart *hu)
 {
 	struct bcm_data *bcm = hu->priv;
 
-	BT_DBG("hu %p", hu);
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
 	skb_queue_purge(&bcm->txq);
 
@@ -227,13 +357,15 @@ static int bcm_flush(struct hci_uart *hu)
 
 static int bcm_setup(struct hci_uart *hu)
 {
+	struct bcm_data *bcm = hu->priv;
 	char fw_name[64];
 	const struct firmware *fw;
 	unsigned int speed;
 	int err;
 
-	BT_DBG("hu %p", hu);
+	bt_dev_dbg(hu->hdev, "hu %p", hu);
 
+	hu->hdev->set_diag = bcm_set_diag;
 	hu->hdev->set_bdaddr = btbcm_set_bdaddr;
 
 	err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
@@ -242,13 +374,13 @@ static int bcm_setup(struct hci_uart *hu)
 
 	err = request_firmware(&fw, fw_name, &hu->hdev->dev);
 	if (err < 0) {
-		BT_INFO("%s: BCM: Patch %s not found", hu->hdev->name, fw_name);
+		bt_dev_info(hu->hdev, "BCM: Patch %s not found", fw_name);
 		return 0;
 	}
 
 	err = btbcm_patchram(hu->hdev, fw);
 	if (err) {
-		BT_INFO("%s: BCM: Patch failed (%d)", hu->hdev->name, err);
+		bt_dev_info(hu->hdev, "BCM: Patch failed (%d)", err);
 		goto finalize;
 	}
 
@@ -281,14 +413,28 @@ finalize:
 	release_firmware(fw);
 
 	err = btbcm_finalize(hu->hdev);
+	if (err)
+		return err;
+
+	err = bcm_request_irq(bcm);
+	if (!err)
+		err = bcm_setup_sleep(hu);
 
 	return err;
 }
 
+#define BCM_RECV_LM_DIAG \
+	.type = BCM_LM_DIAG_PKT, \
+	.hlen = BCM_LM_DIAG_SIZE, \
+	.loff = 0, \
+	.lsize = 0, \
+	.maxlen = BCM_LM_DIAG_SIZE
+
 static const struct h4_recv_pkt bcm_recv_pkts[] = {
-	{ H4_RECV_ACL,   .recv = hci_recv_frame },
-	{ H4_RECV_SCO,   .recv = hci_recv_frame },
-	{ H4_RECV_EVENT, .recv = hci_recv_frame },
+	{ H4_RECV_ACL,      .recv = hci_recv_frame },
+	{ H4_RECV_SCO,      .recv = hci_recv_frame },
+	{ H4_RECV_EVENT,    .recv = hci_recv_frame },
+	{ BCM_RECV_LM_DIAG, .recv = hci_recv_diag  },
 };
 
 static int bcm_recv(struct hci_uart *hu, const void *data, int count)
@@ -302,9 +448,18 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count)
 				  bcm_recv_pkts, ARRAY_SIZE(bcm_recv_pkts));
 	if (IS_ERR(bcm->rx_skb)) {
 		int err = PTR_ERR(bcm->rx_skb);
-		BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+		bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err);
 		bcm->rx_skb = NULL;
 		return err;
+	} else if (!bcm->rx_skb) {
+		/* Delay auto-suspend when receiving completed packet */
+		mutex_lock(&bcm_device_lock);
+		if (bcm->dev && bcm_device_exists(bcm->dev)) {
+			pm_runtime_get(&bcm->dev->pdev->dev);
+			pm_runtime_mark_last_busy(&bcm->dev->pdev->dev);
+			pm_runtime_put_autosuspend(&bcm->dev->pdev->dev);
+		}
+		mutex_unlock(&bcm_device_lock);
 	}
 
 	return count;
@@ -314,7 +469,7 @@ static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 {
 	struct bcm_data *bcm = hu->priv;
 
-	BT_DBG("hu %p skb %p", hu, skb);
+	bt_dev_dbg(hu->hdev, "hu %p skb %p", hu, skb);
 
 	/* Prepend skb with frame type */
 	memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
@@ -326,39 +481,105 @@ static int bcm_enqueue(struct hci_uart *hu, struct sk_buff *skb)
 static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
 {
 	struct bcm_data *bcm = hu->priv;
+	struct sk_buff *skb = NULL;
+	struct bcm_device *bdev = NULL;
+
+	mutex_lock(&bcm_device_lock);
+
+	if (bcm_device_exists(bcm->dev)) {
+		bdev = bcm->dev;
+		pm_runtime_get_sync(&bdev->pdev->dev);
+		/* Shall be resumed here */
+	}
+
+	skb = skb_dequeue(&bcm->txq);
+
+	if (bdev) {
+		pm_runtime_mark_last_busy(&bdev->pdev->dev);
+		pm_runtime_put_autosuspend(&bdev->pdev->dev);
+	}
+
+	mutex_unlock(&bcm_device_lock);
 
-	return skb_dequeue(&bcm->txq);
+	return skb;
 }
 
-#ifdef CONFIG_PM_SLEEP
-/* Platform suspend callback */
-static int bcm_suspend(struct device *dev)
+#ifdef CONFIG_PM
+static int bcm_suspend_device(struct device *dev)
 {
 	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
 
-	BT_DBG("suspend (%p): is_suspended %d", bdev, bdev->is_suspended);
+	bt_dev_dbg(bdev, "");
 
-	spin_lock(&bcm_device_lock);
-
-	if (!bdev->hu)
-		goto unlock;
-
-	if (!bdev->is_suspended) {
+	if (!bdev->is_suspended && bdev->hu) {
 		hci_uart_set_flow_control(bdev->hu, true);
 
-		/* Once this callback returns, driver suspends BT via GPIO */
+		/* Once this returns, driver suspends BT via GPIO */
 		bdev->is_suspended = true;
 	}
 
 	/* Suspend the device */
 	if (bdev->device_wakeup) {
 		gpiod_set_value(bdev->device_wakeup, false);
-		BT_DBG("suspend, delaying 15 ms");
+		bt_dev_dbg(bdev, "suspend, delaying 15 ms");
 		mdelay(15);
 	}
 
+	return 0;
+}
+
+static int bcm_resume_device(struct device *dev)
+{
+	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+
+	bt_dev_dbg(bdev, "");
+
+	if (bdev->device_wakeup) {
+		gpiod_set_value(bdev->device_wakeup, true);
+		bt_dev_dbg(bdev, "resume, delaying 15 ms");
+		mdelay(15);
+	}
+
+	/* When this executes, the device has woken up already */
+	if (bdev->is_suspended && bdev->hu) {
+		bdev->is_suspended = false;
+
+		hci_uart_set_flow_control(bdev->hu, false);
+	}
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM_SLEEP
+/* Platform suspend callback */
+static int bcm_suspend(struct device *dev)
+{
+	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
+	int error;
+
+	bt_dev_dbg(bdev, "suspend: is_suspended %d", bdev->is_suspended);
+
+	/* bcm_suspend can be called at any time as long as platform device is
+	 * bound, so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
+
+	if (!bdev->hu)
+		goto unlock;
+
+	if (pm_runtime_active(dev))
+		bcm_suspend_device(dev);
+
+	if (device_may_wakeup(&bdev->pdev->dev)) {
+		error = enable_irq_wake(bdev->irq);
+		if (!error)
+			bt_dev_dbg(bdev, "BCM irq: enabled");
+	}
+
 unlock:
-	spin_unlock(&bcm_device_lock);
+	mutex_unlock(&bcm_device_lock);
 
 	return 0;
 }
@@ -368,28 +589,30 @@ static int bcm_resume(struct device *dev)
 {
 	struct bcm_device *bdev = platform_get_drvdata(to_platform_device(dev));
 
-	BT_DBG("resume (%p): is_suspended %d", bdev, bdev->is_suspended);
+	bt_dev_dbg(bdev, "resume: is_suspended %d", bdev->is_suspended);
 
-	spin_lock(&bcm_device_lock);
+	/* bcm_resume can be called at any time as long as platform device is
+	 * bound, so it should use bcm_device_lock to protect access to hci_uart
+	 * and device_wake-up GPIO.
+	 */
+	mutex_lock(&bcm_device_lock);
 
 	if (!bdev->hu)
 		goto unlock;
 
-	if (bdev->device_wakeup) {
-		gpiod_set_value(bdev->device_wakeup, true);
-		BT_DBG("resume, delaying 15 ms");
-		mdelay(15);
+	if (device_may_wakeup(&bdev->pdev->dev)) {
+		disable_irq_wake(bdev->irq);
+		bt_dev_dbg(bdev, "BCM irq: disabled");
 	}
 
-	/* When this callback executes, the device has woken up already */
-	if (bdev->is_suspended) {
-		bdev->is_suspended = false;
-
-		hci_uart_set_flow_control(bdev->hu, false);
-	}
+	bcm_resume_device(dev);
 
 unlock:
-	spin_unlock(&bcm_device_lock);
+	mutex_unlock(&bcm_device_lock);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
 
 	return 0;
 }
@@ -397,24 +620,59 @@ unlock:
 
 static const struct acpi_gpio_params device_wakeup_gpios = { 0, 0, false };
 static const struct acpi_gpio_params shutdown_gpios = { 1, 0, false };
+static const struct acpi_gpio_params host_wakeup_gpios = { 2, 0, false };
 
 static const struct acpi_gpio_mapping acpi_bcm_default_gpios[] = {
 	{ "device-wakeup-gpios", &device_wakeup_gpios, 1 },
 	{ "shutdown-gpios", &shutdown_gpios, 1 },
+	{ "host-wakeup-gpios", &host_wakeup_gpios, 1 },
 	{ },
 };
 
 #ifdef CONFIG_ACPI
+static u8 acpi_active_low = ACPI_ACTIVE_LOW;
+
+/* IRQ polarity of some chipsets are not defined correctly in ACPI table. */
+static const struct dmi_system_id bcm_wrong_irq_dmi_table[] = {
+	{
+		.ident = "Asus T100TA",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_SYS_VENDOR,
+					"ASUSTeK COMPUTER INC."),
+			DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "T100TA"),
+		},
+		.driver_data = &acpi_active_low,
+	},
+	{ }
+};
+
 static int bcm_resource(struct acpi_resource *ares, void *data)
 {
 	struct bcm_device *dev = data;
-
-	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		struct acpi_resource_uart_serialbus *sb;
-
+	struct acpi_resource_extended_irq *irq;
+	struct acpi_resource_gpio *gpio;
+	struct acpi_resource_uart_serialbus *sb;
+
+	switch (ares->type) {
+	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
+		irq = &ares->data.extended_irq;
+		dev->irq_polarity = irq->polarity;
+		break;
+
+	case ACPI_RESOURCE_TYPE_GPIO:
+		gpio = &ares->data.gpio;
+		if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT)
+			dev->irq_polarity = gpio->polarity;
+		break;
+
+	case ACPI_RESOURCE_TYPE_SERIAL_BUS:
 		sb = &ares->data.uart_serial_bus;
 		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART)
 			dev->init_speed = sb->default_baud_rate;
+		break;
+
+	default:
+		break;
 	}
 
 	/* Always tell the ACPI core to skip this resource */
@@ -424,15 +682,10 @@ static int bcm_resource(struct acpi_resource *ares, void *data)
 static int bcm_acpi_probe(struct bcm_device *dev)
 {
 	struct platform_device *pdev = dev->pdev;
-	const struct acpi_device_id *id;
-	struct acpi_device *adev;
 	LIST_HEAD(resources);
+	const struct dmi_system_id *dmi_id;
 	int ret;
 
-	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
-	if (!id)
-		return -ENODEV;
-
 	/* Retrieve GPIO data */
 	dev->name = dev_name(&pdev->dev);
 	ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
@@ -453,6 +706,21 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 	if (IS_ERR(dev->shutdown))
 		return PTR_ERR(dev->shutdown);
 
+	/* IRQ can be declared in ACPI table as Interrupt or GpioInt */
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq <= 0) {
+		struct gpio_desc *gpio;
+
+		gpio = devm_gpiod_get_optional(&pdev->dev, "host-wakeup",
+					       GPIOD_IN);
+		if (IS_ERR(gpio))
+			return PTR_ERR(gpio);
+
+		dev->irq = gpiod_to_irq(gpio);
+	}
+
+	dev_info(&pdev->dev, "BCM irq: %d\n", dev->irq);
+
 	/* Make sure at-least one of the GPIO is defined and that
 	 * a name is specified for this instance
 	 */
@@ -462,11 +730,18 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 	}
 
 	/* Retrieve UART ACPI info */
-	adev = ACPI_COMPANION(&dev->pdev->dev);
-	if (!adev)
-		return 0;
+	ret = acpi_dev_get_resources(ACPI_COMPANION(&dev->pdev->dev),
+				     &resources, bcm_resource, dev);
+	if (ret < 0)
+		return ret;
+	acpi_dev_free_resource_list(&resources);
 
-	acpi_dev_get_resources(adev, &resources, bcm_resource, dev);
+	dmi_id = dmi_first_match(bcm_wrong_irq_dmi_table);
+	if (dmi_id) {
+		bt_dev_warn(dev, "%s: Overwriting IRQ polarity to active low",
+			    dmi_id->ident);
+		dev->irq_polarity = *(u8 *)dmi_id->driver_data;
+	}
 
 	return 0;
 }
@@ -480,7 +755,6 @@ static int bcm_acpi_probe(struct bcm_device *dev)
 static int bcm_probe(struct platform_device *pdev)
 {
 	struct bcm_device *dev;
-	struct acpi_device_id *pdata = pdev->dev.platform_data;
 	int ret;
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
@@ -489,24 +763,18 @@ static int bcm_probe(struct platform_device *pdev)
 
 	dev->pdev = pdev;
 
-	if (ACPI_HANDLE(&pdev->dev)) {
-		ret = bcm_acpi_probe(dev);
-		if (ret)
-			return ret;
-	} else if (pdata) {
-		dev->name = pdata->id;
-	} else {
-		return -ENODEV;
-	}
+	ret = bcm_acpi_probe(dev);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, dev);
 
 	dev_info(&pdev->dev, "%s device registered.\n", dev->name);
 
 	/* Place this instance on the device list */
-	spin_lock(&bcm_device_lock);
+	mutex_lock(&bcm_device_lock);
 	list_add_tail(&dev->list, &bcm_device_list);
-	spin_unlock(&bcm_device_lock);
+	mutex_unlock(&bcm_device_lock);
 
 	bcm_gpio_set_power(dev, false);
 
@@ -517,9 +785,9 @@ static int bcm_remove(struct platform_device *pdev)
 {
 	struct bcm_device *dev = platform_get_drvdata(pdev);
 
-	spin_lock(&bcm_device_lock);
+	mutex_lock(&bcm_device_lock);
 	list_del(&dev->list);
-	spin_unlock(&bcm_device_lock);
+	mutex_unlock(&bcm_device_lock);
 
 	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pdev->dev));
 
@@ -531,6 +799,7 @@ static int bcm_remove(struct platform_device *pdev)
 static const struct hci_uart_proto bcm_proto = {
 	.id		= HCI_UART_BCM,
 	.name		= "BCM",
+	.manufacturer	= 15,
 	.init_speed	= 115200,
 	.oper_speed	= 4000000,
 	.open		= bcm_open,
@@ -553,7 +822,10 @@ MODULE_DEVICE_TABLE(acpi, bcm_acpi_match);
 #endif
 
 /* Platform suspend and resume callbacks */
-static SIMPLE_DEV_PM_OPS(bcm_pm_ops, bcm_suspend, bcm_resume);
+static const struct dev_pm_ops bcm_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(bcm_suspend, bcm_resume)
+	SET_RUNTIME_PM_OPS(bcm_suspend_device, bcm_resume_device, NULL)
+};
 
 static struct platform_driver bcm_driver = {
 	.probe = bcm_probe,