Merge branch 'next' into for-linus

Prepare first round of input updates for 4.3 merge window.

13 files changed, 62 insertions, 195 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7e62751abfac..a46660204e3a 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -351,6 +351,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	/* JMicron 362B and 362C have an AHCI function with IDE class code */
 	{ PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr },
 	{ PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr },
+	/* May need to update quirk_jmicron_async_suspend() for additions */
 
 	/* ATI */
 	{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
@@ -1451,18 +1452,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	else if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
 		ahci_pci_bar = AHCI_PCI_BAR_CAVIUM;
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/ahci_brcmstb.c b/drivers/ata/ahci_brcmstb.c
index ce1e3a885981..14b7305d2ba0 100644
--- a/drivers/ata/ahci_brcmstb.c
+++ b/drivers/ata/ahci_brcmstb.c
@@ -92,7 +92,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
 	 * Other architectures (e.g., ARM) either do not support big endian, or
 	 * else leave I/O in little endian mode.
 	 */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		return __raw_readl(addr);
 	else
 		return readl_relaxed(addr);
@@ -101,7 +101,7 @@ static inline u32 brcm_sata_readreg(void __iomem *addr)
 static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
 {
 	/* See brcm_sata_readreg() comments */
-	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(__BIG_ENDIAN))
+	if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
 		__raw_writel(val, addr);
 	else
 		writel_relaxed(val, addr);
@@ -209,6 +209,7 @@ static void brcm_sata_init(struct brcm_ahci_priv *priv)
 			   priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int brcm_ahci_suspend(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
@@ -231,6 +232,7 @@ static int brcm_ahci_resume(struct device *dev)
 	brcm_sata_phys_enable(priv);
 	return ahci_platform_resume(dev);
 }
+#endif
 
 static struct scsi_host_template ahci_platform_sht = {
 	AHCI_SHT(DRV_NAME),
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index e83fc3d0da9c..b79cb10e289e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -694,11 +694,11 @@ static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
  *	RETURNS:
  *	Block address read from @tf.
  */
-u64 ata_tf_read_block(const struct ata_taskfile *tf, struct ata_device *dev)
+u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
 {
 	u64 block = 0;
 
-	if (!dev || tf->flags & ATA_TFLAG_LBA) {
+	if (tf->flags & ATA_TFLAG_LBA) {
 		if (tf->flags & ATA_TFLAG_LBA48) {
 			block |= (u64)tf->hob_lbah << 40;
 			block |= (u64)tf->hob_lbam << 32;
@@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 	return 0;
 }
 
-static void ata_dev_config_sense_reporting(struct ata_device *dev)
-{
-	unsigned int err_mask;
-
-	if (!ata_id_has_sense_reporting(dev->id))
-		return;
-
-	if (ata_id_sense_reporting_enabled(dev->id))
-		return;
-
-	err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
-	if (err_mask) {
-		ata_dev_dbg(dev,
-			    "failed to enable Sense Data Reporting, Emask 0x%x\n",
-			    err_mask);
-	}
-}
-
 /**
  *	ata_dev_configure - Configure the specified ATA/ATAPI device
  *	@dev: Target device to configure
@@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev)
 					dev->devslp_timing[i] = sata_setting[j];
 				}
 		}
-		ata_dev_config_sense_reporting(dev);
+
 		dev->cdb_len = 16;
 	}
 
@@ -2478,6 +2460,10 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_1024)
+		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_1024,
+					 dev->max_sectors);
+
 	if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
 		dev->max_sectors = ATA_MAX_SECTORS_LBA48;
 
@@ -4146,6 +4132,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "Slimtype DVD A  DS8A8SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 	{ "Slimtype DVD A  DS8A9SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 
+	/*
+	 * Causes silent data corruption with higher max sects.
+	 * http://lkml.kernel.org/g/x49wpy40ysk.fsf@segfault.boston.devel.redhat.com
+	 */
+	{ "ST380013AS",		"3.20",		ATA_HORKAGE_MAX_SEC_1024 },
+
 	/* Devices we expect to fail diagnostics */
 
 	/* Devices where NCQ should be avoided */
@@ -4174,9 +4166,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	/* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */
+	/* drives which fail FPDMA_AA activation (some may freeze afterwards) */
 	{ "ST1000LM024 HN-M101MBB", "2AR10001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
 	{ "ST1000LM024 HN-M101MBB", "2BA30001",	ATA_HORKAGE_BROKEN_FPDMA_AA },
+	{ "VB0250EAVER",	"HPG7",		ATA_HORKAGE_BROKEN_FPDMA_AA },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
 	   Windows driver .inf file - also several Linux problem reports */
@@ -4229,7 +4222,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Micron_M5[15]0*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Micron_M5[15]0_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*M550*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4237,6 +4230,11 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "FCCT*M500*",			NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+
+	/* devices that don't properly handle TRIM commands */
+	{ "SuperSSpeed S238*",		NULL,	ATA_HORKAGE_NOTRIM, },
 
 	/*
 	 * As defined, the DRAT (Deterministic Read After Trim) and RZAT
@@ -4501,7 +4499,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
 	else /* In the ancient relic department - skip all of this */
 		return 0;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/* On some disks, this command causes spin-up, so we need longer timeout */
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;
@@ -4754,6 +4753,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 /**
  *	ata_qc_new_init - Request an available ATA command, and initialize it
  *	@dev: Device from whom we request an available command structure
+ *	@tag: tag
  *
  *	LOCKING:
  *	None.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7465031a893c..cb0508af1459 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1592,8 +1592,6 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
 	tf->hob_lbah = buf[10];
 	tf->nsect = buf[12];
 	tf->hob_nsect = buf[13];
-	if (ata_id_has_ncq_autosense(dev->id))
-		tf->auxiliary = buf[14] << 16 | buf[15] << 8 | buf[16];
 
 	return 0;
 }
@@ -1630,70 +1628,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
 }
 
 /**
- *	ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
- *	@dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
- *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
- *	@dfl_sense_key: default sense key to use
- *
- *	Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
- *	SENSE.  This function is EH helper.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep).
- *
- *	RETURNS:
- *	encoded sense data on success, 0 on failure or if sense data
- *	is not available.
- */
-static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
-				struct scsi_cmnd *cmd)
-{
-	struct ata_device *dev = qc->dev;
-	struct ata_taskfile tf;
-	unsigned int err_mask;
-
-	if (!cmd)
-		return 0;
-
-	DPRINTK("ATA request sense\n");
-	ata_dev_warn(dev, "request sense\n");
-	if (!ata_id_sense_reporting_enabled(dev->id)) {
-		ata_dev_warn(qc->dev, "sense data reporting disabled\n");
-		return 0;
-	}
-	ata_tf_init(dev, &tf);
-
-	tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
-	tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
-	tf.command = ATA_CMD_REQ_SENSE_DATA;
-	tf.protocol = ATA_PROT_NODATA;
-
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
-	/*
-	 * ACS-4 states:
-	 * The device may set the SENSE DATA AVAILABLE bit to one in the
-	 * STATUS field and clear the ERROR bit to zero in the STATUS field
-	 * to indicate that the command returned completion without an error
-	 * and the sense data described in table 306 is available.
-	 *
-	 * IOW the 'ATA_SENSE' bit might not be set even though valid
-	 * sense data is available.
-	 * So check for both.
-	 */
-	if ((tf.command & ATA_SENSE) ||
-		tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
-		ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-		ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
-			     tf.lbah, tf.lbam, tf.lbal);
-	} else {
-		ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
-			     tf.command, err_mask);
-	}
-	return err_mask;
-}
-
-/**
  *	atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
  *	@dev: device to perform REQUEST_SENSE to
  *	@sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
@@ -1855,19 +1789,6 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
 	memcpy(&qc->result_tf, &tf, sizeof(tf));
 	qc->result_tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
 	qc->err_mask |= AC_ERR_DEV | AC_ERR_NCQ;
-	if (qc->result_tf.auxiliary) {
-		char sense_key, asc, ascq;
-
-		sense_key = (qc->result_tf.auxiliary >> 16) & 0xff;
-		asc = (qc->result_tf.auxiliary >> 8) & 0xff;
-		ascq = qc->result_tf.auxiliary & 0xff;
-		ata_dev_dbg(dev, "NCQ Autosense %02x/%02x/%02x\n",
-			    sense_key, asc, ascq);
-		ata_scsi_set_sense(qc->scsicmd, sense_key, asc, ascq);
-		ata_scsi_set_sense_information(qc->scsicmd, &qc->result_tf);
-		qc->flags |= ATA_QCFLAG_SENSE_VALID;
-	}
-
 	ehc->i.err_mask &= ~AC_ERR_DEV;
 }
 
@@ -1897,27 +1818,6 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
 		return ATA_EH_RESET;
 	}
 
-	/*
-	 * Sense data reporting does not work if the
-	 * device fault bit is set.
-	 */
-	if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
-	    !(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
-		if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
-			tmp = ata_eh_request_sense(qc, qc->scsicmd);
-			if (tmp)
-				qc->err_mask |= tmp;
-			else
-				ata_scsi_set_sense_information(qc->scsicmd, tf);
-		} else {
-			ata_dev_warn(qc->dev, "sense data available but port frozen\n");
-		}
-	}
-
-	/* Set by NCQ autosense or request sense above */
-	if (qc->flags & ATA_QCFLAG_SENSE_VALID)
-		return 0;
-
 	if (stat & (ATA_ERR | ATA_DF))
 		qc->err_mask |= AC_ERR_DEV;
 	else
@@ -2661,15 +2561,14 @@ static void ata_eh_link_report(struct ata_link *link)
 
 #ifdef CONFIG_ATA_VERBOSE_ERROR
 		if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
-				    ATA_SENSE | ATA_ERR)) {
+				    ATA_ERR)) {
 			if (res->command & ATA_BUSY)
 				ata_dev_err(qc->dev, "status: { Busy }\n");
 			else
-				ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
+				ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
 				  res->command & ATA_DRDY ? "DRDY " : "",
 				  res->command & ATA_DF ? "DF " : "",
 				  res->command & ATA_DRQ ? "DRQ " : "",
-				  res->command & ATA_SENSE ? "SENSE " : "",
 				  res->command & ATA_ERR ? "ERR " : "");
 		}
 
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7ccc084bf1df..85aa76116a30 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -460,6 +460,13 @@ static void sata_pmp_quirks(struct ata_port *ap)
 				       ATA_LFLAG_NO_SRST |
 				       ATA_LFLAG_ASSUME_ATA;
 		}
+	} else if (vendor == 0x11ab && devid == 0x4140) {
+		/* Marvell 4140 quirks */
+		ata_for_each_link(link, ap, EDGE) {
+			/* port 4 is for SEMB device and it doesn't like SRST */
+			if (link->pmp == 4)
+				link->flags |= ATA_LFLAG_DISABLED;
+		}
 	}
 }
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3131adcc1f87..0d7f0da3a269 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -270,28 +270,13 @@ DEVICE_ATTR(unload_heads, S_IRUGO | S_IWUSR,
 	    ata_scsi_park_show, ata_scsi_park_store);
 EXPORT_SYMBOL_GPL(dev_attr_unload_heads);
 
-void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
 {
-	if (!cmd)
-		return;
-
 	cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
 
 	scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
 }
 
-void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
-				    const struct ata_taskfile *tf)
-{
-	u64 information;
-
-	if (!cmd)
-		return;
-
-	information = ata_tf_read_block(tf, NULL);
-	scsi_set_sense_information(cmd->sense_buffer, information);
-}
-
 static ssize_t
 ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
 			  const char *buf, size_t count)
@@ -1792,9 +1777,7 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
 	    ((cdb[2] & 0x20) || need_sense)) {
 		ata_gen_passthru_sense(qc);
 	} else {
-		if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
-			cmd->result = SAM_STAT_CHECK_CONDITION;
-		} else if (!need_sense) {
+		if (!need_sense) {
 			cmd->result = SAM_STAT_GOOD;
 		} else {
 			/* TODO: decide which descriptor format to use
@@ -2568,7 +2551,8 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
 		rbuf[14] = (lowest_aligned >> 8) & 0x3f;
 		rbuf[15] = lowest_aligned;
 
-		if (ata_id_has_trim(args->id)) {
+		if (ata_id_has_trim(args->id) &&
+		    !(dev->horkage & ATA_HORKAGE_NOTRIM)) {
 			rbuf[14] |= 0x80; /* LBPME */
 
 			if (ata_id_has_zero_after_trim(args->id) &&
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index d6c37bcd416d..e2d94972962d 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -569,6 +569,8 @@ show_ata_dev_trim(struct device *dev,
 
 	if (!ata_id_has_trim(ata_dev->id))
 		mode = "unsupported";
+	else if (ata_dev->horkage & ATA_HORKAGE_NOTRIM)
+		mode = "forced_unsupported";
 	else if (ata_dev->horkage & ATA_HORKAGE_NO_NCQ_TRIM)
 			mode = "forced_unqueued";
 	else if (ata_fpdma_dsm_supported(ata_dev))
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index a998a175f9f1..f840ca18a7c0 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -67,8 +67,7 @@ extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag);
 extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
-extern u64 ata_tf_read_block(const struct ata_taskfile *tf,
-			     struct ata_device *dev);
+extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
 				  int dma_dir, void *buf, unsigned int buflen,
@@ -138,9 +137,6 @@ extern int ata_scsi_add_hosts(struct ata_host *host,
 			      struct scsi_host_template *sht);
 extern void ata_scsi_scan_host(struct ata_port *ap, int sync);
 extern int ata_scsi_offline_dev(struct ata_device *dev);
-extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq);
-extern void ata_scsi_set_sense_information(struct scsi_cmnd *cmd,
-					   const struct ata_taskfile *tf);
 extern void ata_scsi_media_change_notify(struct ata_device *dev);
 extern void ata_scsi_hotplug(struct work_struct *work);
 extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 5d9ee99c2148..80fe0f6fed29 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -834,7 +834,7 @@ static int arasan_cf_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	acdev->clk = clk_get(&pdev->dev, NULL);
+	acdev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(acdev->clk)) {
 		dev_warn(&pdev->dev, "Clock not found\n");
 		return PTR_ERR(acdev->clk);
@@ -843,9 +843,8 @@ static int arasan_cf_probe(struct platform_device *pdev)
 	/* allocate host */
 	host = ata_host_alloc(&pdev->dev, 1);
 	if (!host) {
-		ret = -ENOMEM;
 		dev_warn(&pdev->dev, "alloc host fail\n");
-		goto free_clk;
+		return -ENOMEM;
 	}
 
 	ap = host->ports[0];
@@ -894,7 +893,7 @@ static int arasan_cf_probe(struct platform_device *pdev)
 
 	ret = cf_init(acdev);
 	if (ret)
-		goto free_clk;
+		return ret;
 
 	cf_card_detect(acdev, 0);
 
@@ -904,8 +903,7 @@ static int arasan_cf_probe(struct platform_device *pdev)
 		return 0;
 
 	cf_exit(acdev);
-free_clk:
-	clk_put(acdev->clk);
+
 	return ret;
 }
 
@@ -916,7 +914,6 @@ static int arasan_cf_remove(struct platform_device *pdev)
 
 	ata_host_detach(host);
 	cf_exit(acdev);
-	clk_put(acdev->clk);
 
 	return 0;
 }
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 47e418b8c8ba..4d1a5d2c4287 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -143,18 +143,6 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	/*
-	 * The JMicron chip 361/363 contains one SATA controller and one
-	 * PATA controller,for powering on these both controllers, we must
-	 * follow the sequence one by one, otherwise one of them can not be
-	 * powered on successfully, so here we disable the async suspend
-	 * method for these chips.
-	 */
-	if (pdev->vendor == PCI_VENDOR_ID_JMICRON &&
-		(pdev->device == PCI_DEVICE_ID_JMICRON_JMB363 ||
-		pdev->device == PCI_DEVICE_ID_JMICRON_JMB361))
-		device_disable_async_suspend(&pdev->dev);
-
 	return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
 }
 
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index 6d08446b877c..12fe0f3bb7e9 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -27,12 +27,11 @@
 #include <linux/io.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/libata.h>
 #include <scsi/scsi_host.h>
 
-#include <asm/gpio.h>
-
 #define DRV_NAME	"pata-rb532-cf"
 #define DRV_VERSION	"0.1.0"
 #define DRV_DESC	"PATA driver for RouterBOARD 532 Compact Flash"
diff --git a/drivers/ata/sata_rcar.c b/drivers/ata/sata_rcar.c
index d49a5193b7de..8804127b108c 100644
--- a/drivers/ata/sata_rcar.c
+++ b/drivers/ata/sata_rcar.c
@@ -861,10 +861,6 @@ MODULE_DEVICE_TABLE(of, sata_rcar_match);
 static const struct platform_device_id sata_rcar_id_table[] = {
 	{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
 	{ "sata-r8a7779", RCAR_GEN1_SATA },
-	{ "sata-r8a7790", RCAR_GEN2_SATA },
-	{ "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA },
-	{ "sata-r8a7791", RCAR_GEN2_SATA },
-	{ "sata-r8a7793", RCAR_GEN2_SATA },
 	{ },
 };
 MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index 3a18a8a719b4..fab504fd9cfd 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1238,8 +1238,12 @@ static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
 	readl(mmio + PDC_SDRAM_CONTROL);
 
 	/* Turn on for ECC */
-	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
-			  PDC_DIMM_SPD_TYPE, &spd0);
+	if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+			       PDC_DIMM_SPD_TYPE, &spd0)) {
+		pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+		       PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+		return 1;
+	}
 	if (spd0 == 0x02) {
 		data |= (0x01 << 16);
 		writel(data, mmio + PDC_SDRAM_CONTROL);
@@ -1380,8 +1384,12 @@ static unsigned int pdc20621_dimm_init(struct ata_host *host)
 
 	/* ECC initiliazation. */
 
-	pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
-			  PDC_DIMM_SPD_TYPE, &spd0);
+	if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
+			       PDC_DIMM_SPD_TYPE, &spd0)) {
+		pr_err("Failed in i2c read: device=%#x, subaddr=%#x\n",
+		       PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
+		return 1;
+	}
 	if (spd0 == 0x02) {
 		void *buf;
 		VPRINTK("Start ECC initialization\n");