ata: remove pata_at32

Since AVR32 was removed, pata_at32 is unselectable/uncompilable.
Remove this driver.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

1 files changed, 0 insertions, 400 deletions

diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
deleted file mode 100644
index 9aeb7a6dd4d4..000000000000
--- a/drivers/ata/pata_at32.c
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * AVR32 SMC/CFC PATA Driver
- *
- * Copyright (C) 2007 Atmel Norway
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#define DEBUG
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <scsi/scsi_host.h>
-#include <linux/ata.h>
-#include <linux/libata.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/board.h>
-#include <mach/smc.h>
-
-#define DRV_NAME "pata_at32"
-#define DRV_VERSION "0.0.3"
-
-/*
- * CompactFlash controller memory layout relative to the base address:
- *
- *	Attribute memory:  0000 0000 -> 003f ffff
- *	Common memory:	   0040 0000 -> 007f ffff
- *	I/O memory:	   0080 0000 -> 00bf ffff
- *	True IDE Mode:	   00c0 0000 -> 00df ffff
- *	Alt IDE Mode:	   00e0 0000 -> 00ff ffff
- *
- * Only True IDE and Alt True IDE mode are needed for this driver.
- *
- *	True IDE mode	  => CS0 = 0, CS1 = 1 (cmd, error, stat, etc)
- *	Alt True IDE mode => CS0 = 1, CS1 = 0 (ctl, alt_stat)
- */
-#define CF_IDE_OFFSET	  0x00c00000
-#define CF_ALT_IDE_OFFSET 0x00e00000
-#define CF_RES_SIZE	  2048
-
-/*
- * Define DEBUG_BUS if you are doing debugging of your own EBI -> PATA
- * adaptor with a logic analyzer or similar.
- */
-#undef DEBUG_BUS
-
-/*
- * ATA PIO modes
- *
- *	Name	| Mb/s	| Min cycle time | Mask
- *	--------+-------+----------------+--------
- *	Mode 0	| 3.3	| 600 ns	 | 0x01
- *	Mode 1	| 5.2	| 383 ns	 | 0x03
- *	Mode 2	| 8.3	| 240 ns	 | 0x07
- *	Mode 3	| 11.1	| 180 ns	 | 0x0f
- *	Mode 4	| 16.7	| 120 ns	 | 0x1f
- *
- * Alter PIO_MASK below according to table to set maximal PIO mode.
- */
-enum {
-  PIO_MASK = ATA_PIO4,
-};
-
-/*
- * Struct containing private information about device.
- */
-struct at32_ide_info {
-	unsigned int		irq;
-	struct resource		res_ide;
-	struct resource		res_alt;
-	void __iomem		*ide_addr;
-	void __iomem		*alt_addr;
-	unsigned int		cs;
-	struct smc_config	smc;
-};
-
-/*
- * Setup SMC for the given ATA timing.
- */
-static int pata_at32_setup_timing(struct device *dev,
-				  struct at32_ide_info *info,
-				  const struct ata_timing *ata)
-{
-	struct smc_config *smc = &info->smc;
-	struct smc_timing timing;
-
-	int active;
-	int recover;
-
-	memset(&timing, 0, sizeof(struct smc_timing));
-
-	/* Total cycle time */
-	timing.read_cycle  = ata->cyc8b;
-
-	/* DIOR <= CFIOR timings */
-	timing.nrd_setup   = ata->setup;
-	timing.nrd_pulse   = ata->act8b;
-	timing.nrd_recover = ata->rec8b;
-
-	/* Convert nanosecond timing to clock cycles */
-	smc_set_timing(smc, &timing);
-
-	/* Add one extra cycle setup due to signal ring */
-	smc->nrd_setup = smc->nrd_setup + 1;
-
-	active  = smc->nrd_setup + smc->nrd_pulse;
-	recover = smc->read_cycle - active;
-
-	/* Need at least two cycles recovery */
-	if (recover < 2)
-	  smc->read_cycle = active + 2;
-
-	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
-	smc->ncs_read_setup = 1;
-	smc->ncs_read_pulse = smc->read_cycle - 2;
-
-	/* Write timings same as read timings */
-	smc->write_cycle = smc->read_cycle;
-	smc->nwe_setup = smc->nrd_setup;
-	smc->nwe_pulse = smc->nrd_pulse;
-	smc->ncs_write_setup = smc->ncs_read_setup;
-	smc->ncs_write_pulse = smc->ncs_read_pulse;
-
-	/* Do some debugging output of ATA and SMC timings */
-	dev_dbg(dev, "ATA: C=%d S=%d P=%d R=%d\n",
-		ata->cyc8b, ata->setup, ata->act8b, ata->rec8b);
-
-	dev_dbg(dev, "SMC: C=%d S=%d P=%d NS=%d NP=%d\n",
-		smc->read_cycle, smc->nrd_setup, smc->nrd_pulse,
-		smc->ncs_read_setup, smc->ncs_read_pulse);
-
-	/* Finally, configure the SMC */
-	return smc_set_configuration(info->cs, smc);
-}
-
-/*
- * Procedures for libATA.
- */
-static void pata_at32_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
-	struct ata_timing timing;
-	struct at32_ide_info *info = ap->host->private_data;
-
-	int ret;
-
-	/* Compute ATA timing */
-	ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
-	if (ret) {
-		dev_warn(ap->dev, "Failed to compute ATA timing %d\n", ret);
-		return;
-	}
-
-	/* Setup SMC to ATA timing */
-	ret = pata_at32_setup_timing(ap->dev, info, &timing);
-	if (ret) {
-		dev_warn(ap->dev, "Failed to setup ATA timing %d\n", ret);
-		return;
-	}
-}
-
-static struct scsi_host_template at32_sht = {
-	ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations at32_port_ops = {
-	.inherits		= &ata_sff_port_ops,
-	.cable_detect		= ata_cable_40wire,
-	.set_piomode		= pata_at32_set_piomode,
-};
-
-static int __init pata_at32_init_one(struct device *dev,
-				     struct at32_ide_info *info)
-{
-	struct ata_host *host;
-	struct ata_port *ap;
-
-	host = ata_host_alloc(dev, 1);
-	if (!host)
-		return -ENOMEM;
-
-	ap = host->ports[0];
-
-	/* Setup ATA bindings */
-	ap->ops	     = &at32_port_ops;
-	ap->pio_mask = PIO_MASK;
-	ap->flags   |= ATA_FLAG_SLAVE_POSS;
-
-	/*
-	 * Since all 8-bit taskfile transfers has to go on the lower
-	 * byte of the data bus and there is a bug in the SMC that
-	 * makes it impossible to alter the bus width during runtime,
-	 * we need to hardwire the address signals as follows:
-	 *
-	 *	A_IDE(2:0) <= A_EBI(3:1)
-	 *
-	 * This makes all addresses on the EBI even, thus all data
-	 * will be on the lower byte of the data bus.  All addresses
-	 * used by libATA need to be altered according to this.
-	 */
-	ap->ioaddr.altstatus_addr = info->alt_addr + (0x06 << 1);
-	ap->ioaddr.ctl_addr	  = info->alt_addr + (0x06 << 1);
-
-	ap->ioaddr.data_addr	  = info->ide_addr + (ATA_REG_DATA << 1);
-	ap->ioaddr.error_addr	  = info->ide_addr + (ATA_REG_ERR << 1);
-	ap->ioaddr.feature_addr	  = info->ide_addr + (ATA_REG_FEATURE << 1);
-	ap->ioaddr.nsect_addr	  = info->ide_addr + (ATA_REG_NSECT << 1);
-	ap->ioaddr.lbal_addr	  = info->ide_addr + (ATA_REG_LBAL << 1);
-	ap->ioaddr.lbam_addr	  = info->ide_addr + (ATA_REG_LBAM << 1);
-	ap->ioaddr.lbah_addr	  = info->ide_addr + (ATA_REG_LBAH << 1);
-	ap->ioaddr.device_addr	  = info->ide_addr + (ATA_REG_DEVICE << 1);
-	ap->ioaddr.status_addr	  = info->ide_addr + (ATA_REG_STATUS << 1);
-	ap->ioaddr.command_addr	  = info->ide_addr + (ATA_REG_CMD << 1);
-
-	/* Set info as private data of ATA host */
-	host->private_data = info;
-
-	/* Register ATA device and return */
-	return ata_host_activate(host, info->irq, ata_sff_interrupt,
-				 IRQF_SHARED | IRQF_TRIGGER_RISING,
-				 &at32_sht);
-}
-
-/*
- * This function may come in handy for people analyzing their own
- * EBI -> PATA adaptors.
- */
-#ifdef DEBUG_BUS
-
-static void __init pata_at32_debug_bus(struct device *dev,
-				       struct at32_ide_info *info)
-{
-	const int d1 = 0xff;
-	const int d2 = 0x00;
-
-	int i;
-
-	/* Write 8-bit values (registers) */
-	iowrite8(d1, info->alt_addr + (0x06 << 1));
-	iowrite8(d2, info->alt_addr + (0x06 << 1));
-
-	for (i = 0; i < 8; i++) {
-		iowrite8(d1, info->ide_addr + (i << 1));
-		iowrite8(d2, info->ide_addr + (i << 1));
-	}
-
-	/* Write 16 bit values (data) */
-	iowrite16(d1,	   info->ide_addr);
-	iowrite16(d1 << 8, info->ide_addr);
-
-	iowrite16(d1,	   info->ide_addr);
-	iowrite16(d1 << 8, info->ide_addr);
-}
-
-#endif
-
-static int __init pata_at32_probe(struct platform_device *pdev)
-{
-	const struct ata_timing initial_timing =
-		{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
-
-	struct device		 *dev = &pdev->dev;
-	struct at32_ide_info	 *info;
-	struct ide_platform_data *board = dev_get_platdata(&pdev->dev);
-	struct resource		 *res;
-
-	int irq;
-	int ret;
-
-	if (!board)
-		return -ENXIO;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENXIO;
-
-	/* Retrive IRQ */
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
-		return irq;
-
-	/* Setup struct containing private information */
-	info = kzalloc(sizeof(struct at32_ide_info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	info->irq = irq;
-	info->cs  = board->cs;
-
-	/* Request memory resources */
-	info->res_ide.start = res->start + CF_IDE_OFFSET;
-	info->res_ide.end   = info->res_ide.start + CF_RES_SIZE - 1;
-	info->res_ide.name  = "ide";
-	info->res_ide.flags = IORESOURCE_MEM;
-
-	ret = request_resource(res, &info->res_ide);
-	if (ret)
-		goto err_req_res_ide;
-
-	info->res_alt.start = res->start + CF_ALT_IDE_OFFSET;
-	info->res_alt.end   = info->res_alt.start + CF_RES_SIZE - 1;
-	info->res_alt.name  = "alt";
-	info->res_alt.flags = IORESOURCE_MEM;
-
-	ret = request_resource(res, &info->res_alt);
-	if (ret)
-		goto err_req_res_alt;
-
-	/* Setup non-timing elements of SMC */
-	info->smc.bus_width	 = 2; /* 16 bit data bus */
-	info->smc.nrd_controlled = 1; /* Sample data on rising edge of NRD */
-	info->smc.nwe_controlled = 0; /* Drive data on falling edge of NCS */
-	info->smc.nwait_mode	 = 3; /* NWAIT is in READY mode */
-	info->smc.byte_write	 = 0; /* Byte select access type */
-	info->smc.tdf_mode	 = 0; /* TDF optimization disabled */
-	info->smc.tdf_cycles	 = 0; /* No TDF wait cycles */
-
-	/* Setup SMC to ATA timing */
-	ret = pata_at32_setup_timing(dev, info, &initial_timing);
-	if (ret)
-		goto err_setup_timing;
-
-	/* Map ATA address space */
-	ret = -ENOMEM;
-	info->ide_addr = devm_ioremap(dev, info->res_ide.start, 16);
-	info->alt_addr = devm_ioremap(dev, info->res_alt.start, 16);
-	if (!info->ide_addr || !info->alt_addr)
-		goto err_ioremap;
-
-#ifdef DEBUG_BUS
-	pata_at32_debug_bus(dev, info);
-#endif
-
-	/* Setup and register ATA device */
-	ret = pata_at32_init_one(dev, info);
-	if (ret)
-		goto err_ata_device;
-
-	return 0;
-
- err_ata_device:
- err_ioremap:
- err_setup_timing:
-	release_resource(&info->res_alt);
- err_req_res_alt:
-	release_resource(&info->res_ide);
- err_req_res_ide:
-	kfree(info);
-
-	return ret;
-}
-
-static int __exit pata_at32_remove(struct platform_device *pdev)
-{
-	struct ata_host *host = platform_get_drvdata(pdev);
-	struct at32_ide_info *info;
-
-	if (!host)
-		return 0;
-
-	info = host->private_data;
-	ata_host_detach(host);
-
-	if (!info)
-		return 0;
-
-	release_resource(&info->res_ide);
-	release_resource(&info->res_alt);
-
-	kfree(info);
-
-	return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:at32_ide");
-
-static struct platform_driver pata_at32_driver = {
-	.remove	       = __exit_p(pata_at32_remove),
-	.driver	       = {
-		.name  = "at32_ide",
-	},
-};
-
-module_platform_driver_probe(pata_at32_driver, pata_at32_probe);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("AVR32 SMC/CFC PATA Driver");
-MODULE_AUTHOR("Kristoffer Nyborg Gregertsen <kngregertsen@norway.atmel.com>");
-MODULE_VERSION(DRV_VERSION);