summaryrefslogtreecommitdiff
path: root/drivers/acpi
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 08:17:00 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2014-12-11 08:17:00 +0300
commit92a578b064d0227a3a7fbbdb9e29dbab7f8d400e (patch)
tree1979a62f38e24997a7312c4ce753860cc95b389b /drivers/acpi
parentc75059c46293adf1560162c17148ab94624f5ed2 (diff)
parente3d857e1ae787a5e268bc89425aadae09c8e95a4 (diff)
downloadlinux-92a578b064d0227a3a7fbbdb9e29dbab7f8d400e.tar.xz
Merge tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki: "This time we have some more new material than we used to have during the last couple of development cycles. The most important part of it to me is the introduction of a unified interface for accessing device properties provided by platform firmware. It works with Device Trees and ACPI in a uniform way and drivers using it need not worry about where the properties come from as long as the platform firmware (either DT or ACPI) makes them available. It covers both devices and "bare" device node objects without struct device representation as that turns out to be necessary in some cases. This has been in the works for quite a few months (and development cycles) and has been approved by all of the relevant maintainers. On top of that, some drivers are switched over to the new interface (at25, leds-gpio, gpio_keys_polled) and some additional changes are made to the core GPIO subsystem to allow device drivers to manipulate GPIOs in the "canonical" way on platforms that provide GPIO information in their ACPI tables, but don't assign names to GPIO lines (in which case the driver needs to do that on the basis of what it knows about the device in question). That also has been approved by the GPIO core maintainers and the rfkill driver is now going to use it. Second is support for hardware P-states in the intel_pstate driver. It uses CPUID to detect whether or not the feature is supported by the processor in which case it will be enabled by default. However, it can be disabled entirely from the kernel command line if necessary. Next is support for a platform firmware interface based on ACPI operation regions used by the PMIC (Power Management Integrated Circuit) chips on the Intel Baytrail-T and Baytrail-T-CR platforms. That interface is used for manipulating power resources and for thermal management: sensor temperature reporting, trip point setting and so on. Also the ACPI core is now going to support the _DEP configuration information in a limited way. Basically, _DEP it supposed to reflect off-the-hierarchy dependencies between devices which may be very indirect, like when AML for one device accesses locations in an operation region handled by another device's driver (usually, the device depended on this way is a serial bus or GPIO controller). The support added this time is sufficient to make the ACPI battery driver work on Asus T100A, but it is general enough to be able to cover some other use cases in the future. Finally, we have a new cpufreq driver for the Loongson1B processor. In addition to the above, there are fixes and cleanups all over the place as usual and a traditional ACPICA update to a recent upstream release. As far as the fixes go, the ACPI LPSS (Low-power Subsystem) driver for Intel platforms should be able to handle power management of the DMA engine correctly, the cpufreq-dt driver should interact with the thermal subsystem in a better way and the ACPI backlight driver should handle some more corner cases, among other things. On top of the ACPICA update there are fixes for race conditions in the ACPICA's interrupt handling code which might lead to some random and strange looking failures on some systems. In the cleanups department the most visible part is the series of commits targeted at getting rid of the CONFIG_PM_RUNTIME configuration option. That was triggered by a discussion regarding the generic power domains code during which we realized that trying to support certain combinations of PM config options was painful and not really worth it, because nobody would use them in production anyway. For this reason, we decided to make CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and that lead to the conclusion that the latter became redundant and CONFIG_PM could be used instead of it. The material here makes that replacement in a major part of the tree, but there will be at least one more batch of that in the second part of the merge window. Specifics: - Support for retrieving device properties information from ACPI _DSD device configuration objects and a unified device properties interface for device drivers (and subsystems) on top of that. As stated above, this works with Device Trees and ACPI and allows device drivers to be written in a platform firmware (DT or ACPI) agnostic way. The at25, leds-gpio and gpio_keys_polled drivers are now going to use this new interface and the GPIO subsystem is additionally modified to allow device drivers to assign names to GPIO resources returned by ACPI _CRS objects (in case _DSD is not present or does not provide the expected data). The changes in this set are mostly from Mika Westerberg, Rafael J Wysocki, Aaron Lu, and Darren Hart with some fixes from others (Fabio Estevam, Geert Uytterhoeven). - Support for Hardware Managed Performance States (HWP) as described in Volume 3, section 14.4, of the Intel SDM in the intel_pstate driver. CPUID is used to detect whether or not the feature is supported by the processor. If supported, it will be enabled automatically unless the intel_pstate=no_hwp switch is present in the kernel command line. From Dirk Brandewie. - New Intel Broadwell-H ID for intel_pstate (Dirk Brandewie). - Support for firmware interface based on ACPI operation regions used by the PMIC chips on the Intel Baytrail-T and Baytrail-T-CR platforms for power resource control and thermal management (Aaron Lu). - Limited support for retrieving off-the-hierarchy dependencies between devices from ACPI _DEP device configuration objects and deferred probing support for the ACPI battery driver based on the _DEP information to make that driver work on Asus T100A (Lan Tianyu). - New cpufreq driver for the Loongson1B processor (Kelvin Cheung). - ACPICA update to upstream revision 20141107 which only affects tools (Bob Moore). - Fixes for race conditions in the ACPICA's interrupt handling code and in the ACPI code related to system suspend and resume (Lv Zheng and Rafael J Wysocki). - ACPI core fix for an RCU-related issue in the ioremap() regions management code that slowed down significantly after CPUs had been allowed to enter idle states even if they'd had RCU callbakcs queued and triggered some problems in certain proprietary graphics driver (and elsewhere). The fix replaces synchronize_rcu() in that code with synchronize_rcu_expedited() which makes the issue go away. From Konstantin Khlebnikov. - ACPI LPSS (Low-Power Subsystem) driver fix to handle power management of the DMA engine included into the LPSS correctly. The problem is that the DMA engine doesn't have ACPI PM support of its own and it simply is turned off when the last LPSS device having ACPI PM support goes into D3cold. To work around that, the PM domain used by the ACPI LPSS driver is redesigned so at least one device with ACPI PM support will be on as long as the DMA engine is in use. From Andy Shevchenko. - ACPI backlight driver fix to avoid using it on "Win8-compatible" systems where it doesn't work and where it was used by default by mistake (Aaron Lu). - Assorted minor ACPI core fixes and cleanups from Tomasz Nowicki, Sudeep Holla, Huang Rui, Hanjun Guo, Fabian Frederick, and Ashwin Chaugule (mostly related to the upcoming ARM64 support). - Intel RAPL (Running Average Power Limit) power capping driver fixes and improvements including new processor IDs (Jacob Pan). - Generic power domains modification to power up domains after attaching devices to them to meet the expectations of device drivers and bus types assuming devices to be accessible at probe time (Ulf Hansson). - Preliminary support for controlling device clocks from the generic power domains core code and modifications of the ARM/shmobile platform to use that feature (Ulf Hansson). - Assorted minor fixes and cleanups of the generic power domains core code (Ulf Hansson, Geert Uytterhoeven). - Assorted minor fixes and cleanups of the device clocks control code in the PM core (Geert Uytterhoeven, Grygorii Strashko). - Consolidation of device power management Kconfig options by making CONFIG_PM_SLEEP select CONFIG_PM_RUNTIME and removing the latter which is now redundant (Rafael J Wysocki and Kevin Hilman). That is the first batch of the changes needed for this purpose. - Core device runtime power management support code cleanup related to the execution of callbacks (Andrzej Hajda). - cpuidle ARM support improvements (Lorenzo Pieralisi). - cpuidle cleanup related to the CPUIDLE_FLAG_TIME_VALID flag and a new MAINTAINERS entry for ARM Exynos cpuidle (Daniel Lezcano and Bartlomiej Zolnierkiewicz). - New cpufreq driver callback (->ready) to be executed when the cpufreq core is ready to use a given policy object and cpufreq-dt driver modification to use that callback for cooling device registration (Viresh Kumar). - cpufreq core fixes and cleanups (Viresh Kumar, Vince Hsu, James Geboski, Tomeu Vizoso). - Assorted fixes and cleanups in the cpufreq-pcc, intel_pstate, cpufreq-dt, pxa2xx cpufreq drivers (Lenny Szubowicz, Ethan Zhao, Stefan Wahren, Petr Cvek). - OPP (Operating Performance Points) framework modification to allow OPPs to be removed too and update of a few cpufreq drivers (cpufreq-dt, exynos5440, imx6q, cpufreq) to remove OPPs (added during initialization) on driver removal (Viresh Kumar). - Hibernation core fixes and cleanups (Tina Ruchandani and Markus Elfring). - PM Kconfig fix related to CPU power management (Pankaj Dubey). - cpupower tool fix (Prarit Bhargava)" * tag 'pm+acpi-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (120 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tools: cpupower: fix return checks for sysfs_get_idlestate_count() drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM leds: leds-gpio: Fix multiple instances registration without 'label' property iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros ...
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/Kconfig36
-rw-r--r--drivers/acpi/Makefile5
-rw-r--r--drivers/acpi/acpi_lpss.c98
-rw-r--r--drivers/acpi/acpica/acglobal.h1
-rw-r--r--drivers/acpi/acpica/aclocal.h4
-rw-r--r--drivers/acpi/acpica/evgpe.c9
-rw-r--r--drivers/acpi/acpica/hwgpe.c53
-rw-r--r--drivers/acpi/acpica/utresrc.c2
-rw-r--r--drivers/acpi/acpica/utxface.c4
-rw-r--r--drivers/acpi/acpica/utxfinit.c11
-rw-r--r--drivers/acpi/battery.c4
-rw-r--r--drivers/acpi/device_pm.c10
-rw-r--r--drivers/acpi/internal.h6
-rw-r--r--drivers/acpi/osl.c8
-rw-r--r--drivers/acpi/pci_irq.c2
-rw-r--r--drivers/acpi/pmic/intel_pmic.c354
-rw-r--r--drivers/acpi/pmic/intel_pmic.h25
-rw-r--r--drivers/acpi/pmic/intel_pmic_crc.c211
-rw-r--r--drivers/acpi/pmic/intel_pmic_xpower.c268
-rw-r--r--drivers/acpi/processor_idle.c20
-rw-r--r--drivers/acpi/property.c551
-rw-r--r--drivers/acpi/scan.c214
-rw-r--r--drivers/acpi/sleep.c2
-rw-r--r--drivers/acpi/tables.c68
-rw-r--r--drivers/acpi/utils.c5
-rw-r--r--drivers/acpi/video.c15
26 files changed, 1878 insertions, 108 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b23fe37f67c0..8951cefb0a96 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -360,15 +360,14 @@ config ACPI_BGRT
config ACPI_REDUCED_HARDWARE_ONLY
bool "Hardware-reduced ACPI support only" if EXPERT
def_bool n
- depends on ACPI
help
- This config item changes the way the ACPI code is built. When this
- option is selected, the kernel will use a specialized version of
- ACPICA that ONLY supports the ACPI "reduced hardware" mode. The
- resulting kernel will be smaller but it will also be restricted to
- running in ACPI reduced hardware mode ONLY.
+ This config item changes the way the ACPI code is built. When this
+ option is selected, the kernel will use a specialized version of
+ ACPICA that ONLY supports the ACPI "reduced hardware" mode. The
+ resulting kernel will be smaller but it will also be restricted to
+ running in ACPI reduced hardware mode ONLY.
- If you are unsure what to do, do not enable this option.
+ If you are unsure what to do, do not enable this option.
source "drivers/acpi/apei/Kconfig"
@@ -394,4 +393,27 @@ config ACPI_EXTLOG
driver adds support for that functionality with corresponding
tracepoint which carries that information to userspace.
+menuconfig PMIC_OPREGION
+ bool "PMIC (Power Management Integrated Circuit) operation region support"
+ help
+ Select this option to enable support for ACPI operation
+ region of the PMIC chip. The operation region can be used
+ to control power rails and sensor reading/writing on the
+ PMIC chip.
+
+if PMIC_OPREGION
+config CRC_PMIC_OPREGION
+ bool "ACPI operation region support for CrystalCove PMIC"
+ depends on INTEL_SOC_PMIC
+ help
+ This config adds ACPI operation region support for CrystalCove PMIC.
+
+config XPOWER_PMIC_OPREGION
+ bool "ACPI operation region support for XPower AXP288 PMIC"
+ depends on AXP288_ADC = y
+ help
+ This config adds ACPI operation region support for XPower AXP288 PMIC.
+
+endif
+
endif # ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index c3b2fcb729f3..f74317cc1ca9 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -47,6 +47,7 @@ acpi-y += int340x_thermal.o
acpi-y += power.o
acpi-y += event.o
acpi-y += sysfs.o
+acpi-y += property.o
acpi-$(CONFIG_X86) += acpi_cmos_rtc.o
acpi-$(CONFIG_DEBUG_FS) += debugfs.o
acpi-$(CONFIG_ACPI_NUMA) += numa.o
@@ -87,3 +88,7 @@ obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
obj-$(CONFIG_ACPI_APEI) += apei/
obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
+
+obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
+obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
+obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 93d160661f4c..4f3febf8a589 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -1,7 +1,7 @@
/*
* ACPI support for Intel Lynxpoint LPSS.
*
- * Copyright (C) 2013, Intel Corporation
+ * Copyright (C) 2013, 2014, Intel Corporation
* Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
* Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
@@ -60,6 +60,8 @@ ACPI_MODULE_NAME("acpi_lpss");
#define LPSS_CLK_DIVIDER BIT(2)
#define LPSS_LTR BIT(3)
#define LPSS_SAVE_CTX BIT(4)
+#define LPSS_DEV_PROXY BIT(5)
+#define LPSS_PROXY_REQ BIT(6)
struct lpss_private_data;
@@ -70,8 +72,10 @@ struct lpss_device_desc {
void (*setup)(struct lpss_private_data *pdata);
};
+static struct device *proxy_device;
+
static struct lpss_device_desc lpss_dma_desc = {
- .flags = LPSS_CLK,
+ .flags = LPSS_CLK | LPSS_PROXY_REQ,
};
struct lpss_private_data {
@@ -146,22 +150,24 @@ static struct lpss_device_desc byt_pwm_dev_desc = {
};
static struct lpss_device_desc byt_uart_dev_desc = {
- .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX |
+ LPSS_DEV_PROXY,
.prv_offset = 0x800,
.setup = lpss_uart_setup,
};
static struct lpss_device_desc byt_spi_dev_desc = {
- .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX |
+ LPSS_DEV_PROXY,
.prv_offset = 0x400,
};
static struct lpss_device_desc byt_sdio_dev_desc = {
- .flags = LPSS_CLK,
+ .flags = LPSS_CLK | LPSS_DEV_PROXY,
};
static struct lpss_device_desc byt_i2c_dev_desc = {
- .flags = LPSS_CLK | LPSS_SAVE_CTX,
+ .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_DEV_PROXY,
.prv_offset = 0x800,
.setup = byt_i2c_setup,
};
@@ -368,6 +374,8 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
adev->driver_data = pdata;
pdev = acpi_create_platform_device(adev);
if (!IS_ERR_OR_NULL(pdev)) {
+ if (!proxy_device && dev_desc->flags & LPSS_DEV_PROXY)
+ proxy_device = &pdev->dev;
return 1;
}
@@ -499,14 +507,15 @@ static void acpi_lpss_set_ltr(struct device *dev, s32 val)
/**
* acpi_lpss_save_ctx() - Save the private registers of LPSS device
* @dev: LPSS device
+ * @pdata: pointer to the private data of the LPSS device
*
* Most LPSS devices have private registers which may loose their context when
* the device is powered down. acpi_lpss_save_ctx() saves those registers into
* prv_reg_ctx array.
*/
-static void acpi_lpss_save_ctx(struct device *dev)
+static void acpi_lpss_save_ctx(struct device *dev,
+ struct lpss_private_data *pdata)
{
- struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
unsigned int i;
for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
@@ -521,12 +530,13 @@ static void acpi_lpss_save_ctx(struct device *dev)
/**
* acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
* @dev: LPSS device
+ * @pdata: pointer to the private data of the LPSS device
*
* Restores the registers that were previously stored with acpi_lpss_save_ctx().
*/
-static void acpi_lpss_restore_ctx(struct device *dev)
+static void acpi_lpss_restore_ctx(struct device *dev,
+ struct lpss_private_data *pdata)
{
- struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
unsigned int i;
/*
@@ -549,54 +559,82 @@ static void acpi_lpss_restore_ctx(struct device *dev)
#ifdef CONFIG_PM_SLEEP
static int acpi_lpss_suspend_late(struct device *dev)
{
- int ret = pm_generic_suspend_late(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+ ret = pm_generic_suspend_late(dev);
if (ret)
return ret;
- acpi_lpss_save_ctx(dev);
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_save_ctx(dev, pdata);
+
return acpi_dev_suspend_late(dev);
}
static int acpi_lpss_resume_early(struct device *dev)
{
- int ret = acpi_dev_resume_early(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+ ret = acpi_dev_resume_early(dev);
if (ret)
return ret;
- acpi_lpss_restore_ctx(dev);
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_restore_ctx(dev, pdata);
+
return pm_generic_resume_early(dev);
}
#endif /* CONFIG_PM_SLEEP */
-#ifdef CONFIG_PM_RUNTIME
static int acpi_lpss_runtime_suspend(struct device *dev)
{
- int ret = pm_generic_runtime_suspend(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+
+ ret = pm_generic_runtime_suspend(dev);
+ if (ret)
+ return ret;
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_save_ctx(dev, pdata);
+
+ ret = acpi_dev_runtime_suspend(dev);
if (ret)
return ret;
- acpi_lpss_save_ctx(dev);
- return acpi_dev_runtime_suspend(dev);
+ if (pdata->dev_desc->flags & LPSS_PROXY_REQ && proxy_device)
+ return pm_runtime_put_sync_suspend(proxy_device);
+
+ return 0;
}
static int acpi_lpss_runtime_resume(struct device *dev)
{
- int ret = acpi_dev_runtime_resume(dev);
+ struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+ int ret;
+
+ if (pdata->dev_desc->flags & LPSS_PROXY_REQ && proxy_device) {
+ ret = pm_runtime_get_sync(proxy_device);
+ if (ret)
+ return ret;
+ }
+ ret = acpi_dev_runtime_resume(dev);
if (ret)
return ret;
- acpi_lpss_restore_ctx(dev);
+ if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+ acpi_lpss_restore_ctx(dev, pdata);
+
return pm_generic_runtime_resume(dev);
}
-#endif /* CONFIG_PM_RUNTIME */
#endif /* CONFIG_PM */
static struct dev_pm_domain acpi_lpss_pm_domain = {
.ops = {
+#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
.prepare = acpi_subsys_prepare,
.complete = acpi_subsys_complete,
@@ -608,7 +646,6 @@ static struct dev_pm_domain acpi_lpss_pm_domain = {
.poweroff_late = acpi_lpss_suspend_late,
.restore_early = acpi_lpss_resume_early,
#endif
-#ifdef CONFIG_PM_RUNTIME
.runtime_suspend = acpi_lpss_runtime_suspend,
.runtime_resume = acpi_lpss_runtime_resume,
#endif
@@ -631,30 +668,27 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
return 0;
pdata = acpi_driver_data(adev);
- if (!pdata || !pdata->mmio_base)
+ if (!pdata)
return 0;
- if (pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
+ if (pdata->mmio_base &&
+ pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
return 0;
}
switch (action) {
- case BUS_NOTIFY_BOUND_DRIVER:
- if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
- pdev->dev.pm_domain = &acpi_lpss_pm_domain;
- break;
- case BUS_NOTIFY_UNBOUND_DRIVER:
- if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
- pdev->dev.pm_domain = NULL;
- break;
case BUS_NOTIFY_ADD_DEVICE:
+ pdev->dev.pm_domain = &acpi_lpss_pm_domain;
if (pdata->dev_desc->flags & LPSS_LTR)
return sysfs_create_group(&pdev->dev.kobj,
&lpss_attr_group);
+ break;
case BUS_NOTIFY_DEL_DEVICE:
if (pdata->dev_desc->flags & LPSS_LTR)
sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
+ pdev->dev.pm_domain = NULL;
+ break;
default:
break;
}
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index ebf02cc10a43..7f60582d0c8c 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -305,6 +305,7 @@ ACPI_INIT_GLOBAL(u8, acpi_gbl_db_output_flags, ACPI_DB_CONSOLE_OUTPUT);
ACPI_INIT_GLOBAL(u8, acpi_gbl_no_resource_disassembly, FALSE);
ACPI_INIT_GLOBAL(u8, acpi_gbl_ignore_noop_operator, FALSE);
+ACPI_INIT_GLOBAL(u8, acpi_gbl_cstyle_disassembly, TRUE);
ACPI_GLOBAL(u8, acpi_gbl_db_opt_disasm);
ACPI_GLOBAL(u8, acpi_gbl_db_opt_verbose);
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index c00e7e41ad75..680d23bbae7c 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -454,6 +454,7 @@ struct acpi_gpe_register_info {
u16 base_gpe_number; /* Base GPE number for this register */
u8 enable_for_wake; /* GPEs to keep enabled when sleeping */
u8 enable_for_run; /* GPEs to keep enabled when running */
+ u8 enable_mask; /* Current mask of enabled GPEs */
};
/*
@@ -722,6 +723,7 @@ union acpi_parse_value {
ACPI_DISASM_ONLY_MEMBERS (\
u8 disasm_flags; /* Used during AML disassembly */\
u8 disasm_opcode; /* Subtype used for disassembly */\
+ char *operator_symbol;/* Used for C-style operator name strings */\
char aml_op_name[16]) /* Op name (debug only) */
/* Flags for disasm_flags field above */
@@ -827,6 +829,8 @@ struct acpi_parse_state {
#define ACPI_PARSEOP_EMPTY_TERMLIST 0x04
#define ACPI_PARSEOP_PREDEF_CHECKED 0x08
#define ACPI_PARSEOP_SPECIAL 0x10
+#define ACPI_PARSEOP_COMPOUND 0x20
+#define ACPI_PARSEOP_ASSIGNMENT 0x40
/*****************************************************************************
*
diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c
index 2095dfb72bcb..aa70154cf4fa 100644
--- a/drivers/acpi/acpica/evgpe.c
+++ b/drivers/acpi/acpica/evgpe.c
@@ -134,7 +134,7 @@ acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
/* Enable the requested GPE */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE);
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE_SAVE);
return_ACPI_STATUS(status);
}
@@ -213,7 +213,7 @@ acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info)
if (ACPI_SUCCESS(status)) {
status =
acpi_hw_low_set_gpe(gpe_event_info,
- ACPI_GPE_DISABLE);
+ ACPI_GPE_DISABLE_SAVE);
}
if (ACPI_FAILURE(status)) {
@@ -616,8 +616,11 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = context;
+ acpi_cpu_flags flags;
+ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
(void)acpi_ev_finish_gpe(gpe_event_info);
+ acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
ACPI_FREE(gpe_event_info);
return;
@@ -655,7 +658,7 @@ acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info * gpe_event_info)
/*
* Enable this GPE, conditionally. This means that the GPE will
- * only be physically enabled if the enable_for_run bit is set
+ * only be physically enabled if the enable_mask bit is set
* in the event_info.
*/
(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE);
diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c
index 48ac7b7b59cd..494027f5c067 100644
--- a/drivers/acpi/acpica/hwgpe.c
+++ b/drivers/acpi/acpica/hwgpe.c
@@ -115,12 +115,12 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
/* Set or clear just the bit that corresponds to this GPE */
register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info);
- switch (action) {
+ switch (action & ~ACPI_GPE_SAVE_MASK) {
case ACPI_GPE_CONDITIONAL_ENABLE:
- /* Only enable if the enable_for_run bit is set */
+ /* Only enable if the corresponding enable_mask bit is set */
- if (!(register_bit & gpe_register_info->enable_for_run)) {
+ if (!(register_bit & gpe_register_info->enable_mask)) {
return (AE_BAD_PARAMETER);
}
@@ -145,6 +145,9 @@ acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u32 action)
/* Write the updated enable mask */
status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
+ if (ACPI_SUCCESS(status) && (action & ACPI_GPE_SAVE_MASK)) {
+ gpe_register_info->enable_mask = enable_mask;
+ }
return (status);
}
@@ -262,6 +265,32 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
/******************************************************************************
*
+ * FUNCTION: acpi_hw_gpe_enable_write
+ *
+ * PARAMETERS: enable_mask - Bit mask to write to the GPE register
+ * gpe_register_info - Gpe Register info
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Write the enable mask byte to the given GPE register.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_hw_gpe_enable_write(u8 enable_mask,
+ struct acpi_gpe_register_info *gpe_register_info)
+{
+ acpi_status status;
+
+ status = acpi_hw_write(enable_mask, &gpe_register_info->enable_address);
+ if (ACPI_SUCCESS(status)) {
+ gpe_register_info->enable_mask = enable_mask;
+ }
+ return (status);
+}
+
+/******************************************************************************
+ *
* FUNCTION: acpi_hw_disable_gpe_block
*
* PARAMETERS: gpe_xrupt_info - GPE Interrupt info
@@ -287,8 +316,8 @@ acpi_hw_disable_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
/* Disable all GPEs in this register */
status =
- acpi_hw_write(0x00,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_gpe_enable_write(0x00,
+ &gpe_block->register_info[i]);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -355,21 +384,23 @@ acpi_hw_enable_runtime_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
{
u32 i;
acpi_status status;
+ struct acpi_gpe_register_info *gpe_register_info;
/* NOTE: assumes that all GPEs are currently disabled */
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
- if (!gpe_block->register_info[i].enable_for_run) {
+ gpe_register_info = &gpe_block->register_info[i];
+ if (!gpe_register_info->enable_for_run) {
continue;
}
/* Enable all "runtime" GPEs in this register */
status =
- acpi_hw_write(gpe_block->register_info[i].enable_for_run,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_gpe_enable_write(gpe_register_info->enable_for_run,
+ gpe_register_info);
if (ACPI_FAILURE(status)) {
return (status);
}
@@ -399,10 +430,12 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
{
u32 i;
acpi_status status;
+ struct acpi_gpe_register_info *gpe_register_info;
/* Examine each GPE Register within the block */
for (i = 0; i < gpe_block->register_count; i++) {
+ gpe_register_info = &gpe_block->register_info[i];
/*
* Enable all "wake" GPEs in this register and disable the
@@ -410,8 +443,8 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
*/
status =
- acpi_hw_write(gpe_block->register_info[i].enable_for_wake,
- &gpe_block->register_info[i].enable_address);
+ acpi_hw_gpe_enable_write(gpe_register_info->enable_for_wake,
+ gpe_register_info);
if (ACPI_FAILURE(status)) {
return (status);
}
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 5cd017c7ac0e..bc1ff820c7dd 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -263,7 +263,7 @@ const char *acpi_gbl_bpb_decode[] = {
/* UART serial bus stop bits */
const char *acpi_gbl_sb_decode[] = {
- "StopBitsNone",
+ "StopBitsZero",
"StopBitsOne",
"StopBitsOnePlusHalf",
"StopBitsTwo"
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index 502a8492dc83..49c873c68756 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -531,7 +531,9 @@ acpi_decode_pld_buffer(u8 *in_buffer,
ACPI_MOVE_32_TO_32(&dword, &buffer[0]);
pld_info->revision = ACPI_PLD_GET_REVISION(&dword);
pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword);
- pld_info->color = ACPI_PLD_GET_COLOR(&dword);
+ pld_info->red = ACPI_PLD_GET_RED(&dword);
+ pld_info->green = ACPI_PLD_GET_GREEN(&dword);
+ pld_info->blue = ACPI_PLD_GET_BLUE(&dword);
/* Second 32-bit DWord */
diff --git a/drivers/acpi/acpica/utxfinit.c b/drivers/acpi/acpica/utxfinit.c
index 13380d818462..b1fd6886e439 100644
--- a/drivers/acpi/acpica/utxfinit.c
+++ b/drivers/acpi/acpica/utxfinit.c
@@ -53,6 +53,9 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utxfinit")
+/* For acpi_exec only */
+void ae_do_object_overrides(void);
+
/*******************************************************************************
*
* FUNCTION: acpi_initialize_subsystem
@@ -65,6 +68,7 @@ ACPI_MODULE_NAME("utxfinit")
* called, so any early initialization belongs here.
*
******************************************************************************/
+
acpi_status __init acpi_initialize_subsystem(void)
{
acpi_status status;
@@ -275,6 +279,13 @@ acpi_status __init acpi_initialize_objects(u32 flags)
return_ACPI_STATUS(status);
}
}
+#ifdef ACPI_EXEC_APP
+ /*
+ * This call implements the "initialization file" option for acpi_exec.
+ * This is the precise point that we want to perform the overrides.
+ */
+ ae_do_object_overrides();
+#endif
/*
* Execute any module-level code that was detected during the table load
diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c
index 8ec8a89a20ab..d98ba4355819 100644
--- a/drivers/acpi/battery.c
+++ b/drivers/acpi/battery.c
@@ -1180,6 +1180,10 @@ static int acpi_battery_add(struct acpi_device *device)
if (!device)
return -EINVAL;
+
+ if (device->dep_unmet)
+ return -EPROBE_DEFER;
+
battery = kzalloc(sizeof(struct acpi_battery), GFP_KERNEL);
if (!battery)
return -ENOMEM;
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 7db193160766..897640188acd 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -201,7 +201,7 @@ int acpi_device_set_power(struct acpi_device *device, int state)
* Transition Power
* ----------------
* In accordance with the ACPI specification first apply power (via
- * power resources) and then evalute _PSx.
+ * power resources) and then evaluate _PSx.
*/
if (device->power.flags.power_resources) {
result = acpi_power_transition(device, state);
@@ -692,7 +692,6 @@ static int acpi_device_wakeup(struct acpi_device *adev, u32 target_state,
return 0;
}
-#ifdef CONFIG_PM_RUNTIME
/**
* acpi_pm_device_run_wake - Enable/disable remote wakeup for given device.
* @dev: Device to enable/disable the platform to wake up.
@@ -714,7 +713,6 @@ int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
return acpi_device_wakeup(adev, ACPI_STATE_S0, enable);
}
EXPORT_SYMBOL(acpi_pm_device_run_wake);
-#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
/**
@@ -773,7 +771,6 @@ static int acpi_dev_pm_full_power(struct acpi_device *adev)
acpi_device_set_power(adev, ACPI_STATE_D0) : 0;
}
-#ifdef CONFIG_PM_RUNTIME
/**
* acpi_dev_runtime_suspend - Put device into a low-power state using ACPI.
* @dev: Device to put into a low-power state.
@@ -855,7 +852,6 @@ int acpi_subsys_runtime_resume(struct device *dev)
return ret ? ret : pm_generic_runtime_resume(dev);
}
EXPORT_SYMBOL_GPL(acpi_subsys_runtime_resume);
-#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM_SLEEP
/**
@@ -1023,10 +1019,9 @@ EXPORT_SYMBOL_GPL(acpi_subsys_freeze);
static struct dev_pm_domain acpi_general_pm_domain = {
.ops = {
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
.runtime_suspend = acpi_subsys_runtime_suspend,
.runtime_resume = acpi_subsys_runtime_resume,
-#endif
#ifdef CONFIG_PM_SLEEP
.prepare = acpi_subsys_prepare,
.complete = acpi_subsys_complete,
@@ -1038,6 +1033,7 @@ static struct dev_pm_domain acpi_general_pm_domain = {
.poweroff_late = acpi_subsys_suspend_late,
.restore_early = acpi_subsys_resume_early,
#endif
+#endif
},
};
diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h
index 447f6d679b29..163e82f536fa 100644
--- a/drivers/acpi/internal.h
+++ b/drivers/acpi/internal.h
@@ -173,4 +173,10 @@ static inline void suspend_nvs_restore(void) {}
bool acpi_osi_is_win8(void);
#endif
+/*--------------------------------------------------------------------------
+ Device properties
+ -------------------------------------------------------------------------- */
+void acpi_init_properties(struct acpi_device *adev);
+void acpi_free_properties(struct acpi_device *adev);
+
#endif /* _ACPI_INTERNAL_H_ */
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 9964f70be98d..f9eeae871593 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -436,7 +436,7 @@ static void acpi_os_drop_map_ref(struct acpi_ioremap *map)
static void acpi_os_map_cleanup(struct acpi_ioremap *map)
{
if (!map->refcount) {
- synchronize_rcu();
+ synchronize_rcu_expedited();
acpi_unmap(map->phys, map->virt);
kfree(map);
}
@@ -1188,6 +1188,12 @@ EXPORT_SYMBOL(acpi_os_execute);
void acpi_os_wait_events_complete(void)
{
+ /*
+ * Make sure the GPE handler or the fixed event handler is not used
+ * on another CPU after removal.
+ */
+ if (acpi_irq_handler)
+ synchronize_hardirq(acpi_gbl_FADT.sci_interrupt);
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
}
diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 6e6b80eb0bba..7cc4e33179f9 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -484,7 +484,7 @@ void acpi_pci_irq_disable(struct pci_dev *dev)
/* Keep IOAPIC pin configuration when suspending */
if (dev->dev.power.is_prepared)
return;
-#ifdef CONFIG_PM_RUNTIME
+#ifdef CONFIG_PM
if (dev->dev.power.runtime_status == RPM_SUSPENDING)
return;
#endif
diff --git a/drivers/acpi/pmic/intel_pmic.c b/drivers/acpi/pmic/intel_pmic.c
new file mode 100644
index 000000000000..a732e5d7e322
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.c
@@ -0,0 +1,354 @@
+/*
+ * intel_pmic.c - Intel PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include "intel_pmic.h"
+
+#define PMIC_POWER_OPREGION_ID 0x8d
+#define PMIC_THERMAL_OPREGION_ID 0x8c
+
+struct acpi_lpat {
+ int temp;
+ int raw;
+};
+
+struct intel_pmic_opregion {
+ struct mutex lock;
+ struct acpi_lpat *lpat;
+ int lpat_count;
+ struct regmap *regmap;
+ struct intel_pmic_opregion_data *data;
+};
+
+static int pmic_get_reg_bit(int address, struct pmic_table *table,
+ int count, int *reg, int *bit)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (table[i].address == address) {
+ *reg = table[i].reg;
+ if (bit)
+ *bit = table[i].bit;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+/**
+ * raw_to_temp(): Return temperature from raw value through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @raw: the raw value, used as a key to get the temerature from the
+ * above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int raw_to_temp(struct acpi_lpat *lpat, int count, int raw)
+{
+ int i, delta_temp, delta_raw, temp;
+
+ for (i = 0; i < count - 1; i++) {
+ if ((raw >= lpat[i].raw && raw <= lpat[i+1].raw) ||
+ (raw <= lpat[i].raw && raw >= lpat[i+1].raw))
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ temp = lpat[i].temp + (raw - lpat[i].raw) * delta_temp / delta_raw;
+
+ return temp;
+}
+
+/**
+ * temp_to_raw(): Return raw value from temperature through LPAT table
+ *
+ * @lpat: the temperature_raw mapping table
+ * @count: the count of the above mapping table
+ * @temp: the temperature, used as a key to get the raw value from the
+ * above mapping table
+ *
+ * A positive value will be returned on success, a negative errno will
+ * be returned in error cases.
+ */
+static int temp_to_raw(struct acpi_lpat *lpat, int count, int temp)
+{
+ int i, delta_temp, delta_raw, raw;
+
+ for (i = 0; i < count - 1; i++) {
+ if (temp >= lpat[i].temp && temp <= lpat[i+1].temp)
+ break;
+ }
+
+ if (i == count - 1)
+ return -ENOENT;
+
+ delta_temp = lpat[i+1].temp - lpat[i].temp;
+ delta_raw = lpat[i+1].raw - lpat[i].raw;
+ raw = lpat[i].raw + (temp - lpat[i].temp) * delta_raw / delta_temp;
+
+ return raw;
+}
+
+static void pmic_thermal_lpat(struct intel_pmic_opregion *opregion,
+ acpi_handle handle, struct device *dev)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj_p, *obj_e;
+ int *lpat, i;
+ acpi_status status;
+
+ status = acpi_evaluate_object(handle, "LPAT", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return;
+
+ obj_p = (union acpi_object *)buffer.pointer;
+ if (!obj_p || (obj_p->type != ACPI_TYPE_PACKAGE) ||
+ (obj_p->package.count % 2) || (obj_p->package.count < 4))
+ goto out;
+
+ lpat = devm_kmalloc(dev, sizeof(int) * obj_p->package.count,
+ GFP_KERNEL);
+ if (!lpat)
+ goto out;
+
+ for (i = 0; i < obj_p->package.count; i++) {
+ obj_e = &obj_p->package.elements[i];
+ if (obj_e->type != ACPI_TYPE_INTEGER) {
+ devm_kfree(dev, lpat);
+ goto out;
+ }
+ lpat[i] = (s64)obj_e->integer.value;
+ }
+
+ opregion->lpat = (struct acpi_lpat *)lpat;
+ opregion->lpat_count = obj_p->package.count / 2;
+
+out:
+ kfree(buffer.pointer);
+}
+
+static acpi_status intel_pmic_power_handler(u32 function,
+ acpi_physical_address address, u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct regmap *regmap = opregion->regmap;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ int reg, bit, result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ if (function == ACPI_WRITE && !(*value64 == 0 || *value64 == 1))
+ return AE_BAD_PARAMETER;
+
+ result = pmic_get_reg_bit(address, d->power_table,
+ d->power_table_count, &reg, &bit);
+ if (result == -ENOENT)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ result = function == ACPI_READ ?
+ d->get_power(regmap, reg, bit, value64) :
+ d->update_power(regmap, reg, bit, *value64 == 1);
+
+ mutex_unlock(&opregion->lock);
+
+ return result ? AE_ERROR : AE_OK;
+}
+
+static int pmic_read_temp(struct intel_pmic_opregion *opregion,
+ int reg, u64 *value)
+{
+ int raw_temp, temp;
+
+ if (!opregion->data->get_raw_temp)
+ return -ENXIO;
+
+ raw_temp = opregion->data->get_raw_temp(opregion->regmap, reg);
+ if (raw_temp < 0)
+ return raw_temp;
+
+ if (!opregion->lpat) {
+ *value = raw_temp;
+ return 0;
+ }
+
+ temp = raw_to_temp(opregion->lpat, opregion->lpat_count, raw_temp);
+ if (temp < 0)
+ return temp;
+
+ *value = temp;
+ return 0;
+}
+
+static int pmic_thermal_temp(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ return function == ACPI_READ ?
+ pmic_read_temp(opregion, reg, value) : -EINVAL;
+}
+
+static int pmic_thermal_aux(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ int raw_temp;
+
+ if (function == ACPI_READ)
+ return pmic_read_temp(opregion, reg, value);
+
+ if (!opregion->data->update_aux)
+ return -ENXIO;
+
+ if (opregion->lpat) {
+ raw_temp = temp_to_raw(opregion->lpat, opregion->lpat_count,
+ *value);
+ if (raw_temp < 0)
+ return raw_temp;
+ } else {
+ raw_temp = *value;
+ }
+
+ return opregion->data->update_aux(opregion->regmap, reg, raw_temp);
+}
+
+static int pmic_thermal_pen(struct intel_pmic_opregion *opregion, int reg,
+ u32 function, u64 *value)
+{
+ struct intel_pmic_opregion_data *d = opregion->data;
+ struct regmap *regmap = opregion->regmap;
+
+ if (!d->get_policy || !d->update_policy)
+ return -ENXIO;
+
+ if (function == ACPI_READ)
+ return d->get_policy(regmap, reg, value);
+
+ if (*value != 0 && *value != 1)
+ return -EINVAL;
+
+ return d->update_policy(regmap, reg, *value);
+}
+
+static bool pmic_thermal_is_temp(int address)
+{
+ return (address <= 0x3c) && !(address % 12);
+}
+
+static bool pmic_thermal_is_aux(int address)
+{
+ return (address >= 4 && address <= 0x40 && !((address - 4) % 12)) ||
+ (address >= 8 && address <= 0x44 && !((address - 8) % 12));
+}
+
+static bool pmic_thermal_is_pen(int address)
+{
+ return address >= 0x48 && address <= 0x5c;
+}
+
+static acpi_status intel_pmic_thermal_handler(u32 function,
+ acpi_physical_address address, u32 bits, u64 *value64,
+ void *handler_context, void *region_context)
+{
+ struct intel_pmic_opregion *opregion = region_context;
+ struct intel_pmic_opregion_data *d = opregion->data;
+ int reg, result;
+
+ if (bits != 32 || !value64)
+ return AE_BAD_PARAMETER;
+
+ result = pmic_get_reg_bit(address, d->thermal_table,
+ d->thermal_table_count, &reg, NULL);
+ if (result == -ENOENT)
+ return AE_BAD_PARAMETER;
+
+ mutex_lock(&opregion->lock);
+
+ if (pmic_thermal_is_temp(address))
+ result = pmic_thermal_temp(opregion, reg, function, value64);
+ else if (pmic_thermal_is_aux(address))
+ result = pmic_thermal_aux(opregion, reg, function, value64);
+ else if (pmic_thermal_is_pen(address))
+ result = pmic_thermal_pen(opregion, reg, function, value64);
+ else
+ result = -EINVAL;
+
+ mutex_unlock(&opregion->lock);
+
+ if (result < 0) {
+ if (result == -EINVAL)
+ return AE_BAD_PARAMETER;
+ else
+ return AE_ERROR;
+ }
+
+ return AE_OK;
+}
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle,
+ struct regmap *regmap,
+ struct intel_pmic_opregion_data *d)
+{
+ acpi_status status;
+ struct intel_pmic_opregion *opregion;
+
+ if (!dev || !regmap || !d)
+ return -EINVAL;
+
+ if (!handle)
+ return -ENODEV;
+
+ opregion = devm_kzalloc(dev, sizeof(*opregion), GFP_KERNEL);
+ if (!opregion)
+ return -ENOMEM;
+
+ mutex_init(&opregion->lock);
+ opregion->regmap = regmap;
+ pmic_thermal_lpat(opregion, handle, dev);
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_POWER_OPREGION_ID,
+ intel_pmic_power_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ status = acpi_install_address_space_handler(handle,
+ PMIC_THERMAL_OPREGION_ID,
+ intel_pmic_thermal_handler,
+ NULL, opregion);
+ if (ACPI_FAILURE(status)) {
+ acpi_remove_address_space_handler(handle, PMIC_POWER_OPREGION_ID,
+ intel_pmic_power_handler);
+ return -ENODEV;
+ }
+
+ opregion->data = d;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(intel_pmic_install_opregion_handler);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic.h b/drivers/acpi/pmic/intel_pmic.h
new file mode 100644
index 000000000000..d4e90af8f0dd
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic.h
@@ -0,0 +1,25 @@
+#ifndef __INTEL_PMIC_H
+#define __INTEL_PMIC_H
+
+struct pmic_table {
+ int address; /* operation region address */
+ int reg; /* corresponding thermal register */
+ int bit; /* control bit for power */
+};
+
+struct intel_pmic_opregion_data {
+ int (*get_power)(struct regmap *r, int reg, int bit, u64 *value);
+ int (*update_power)(struct regmap *r, int reg, int bit, bool on);
+ int (*get_raw_temp)(struct regmap *r, int reg);
+ int (*update_aux)(struct regmap *r, int reg, int raw_temp);
+ int (*get_policy)(struct regmap *r, int reg, u64 *value);
+ int (*update_policy)(struct regmap *r, int reg, int enable);
+ struct pmic_table *power_table;
+ int power_table_count;
+ struct pmic_table *thermal_table;
+ int thermal_table_count;
+};
+
+int intel_pmic_install_opregion_handler(struct device *dev, acpi_handle handle, struct regmap *regmap, struct intel_pmic_opregion_data *d);
+
+#endif
diff --git a/drivers/acpi/pmic/intel_pmic_crc.c b/drivers/acpi/pmic/intel_pmic_crc.c
new file mode 100644
index 000000000000..ef7d8ff95abe
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_crc.c
@@ -0,0 +1,211 @@
+/*
+ * intel_pmic_crc.c - Intel CrystalCove PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include "intel_pmic.h"
+
+#define PWR_SOURCE_SELECT BIT(1)
+
+#define PMIC_A0LOCK_REG 0xc5
+
+static struct pmic_table power_table[] = {
+ {
+ .address = 0x24,
+ .reg = 0x66,
+ .bit = 0x00,
+ },
+ {
+ .address = 0x48,
+ .reg = 0x5d,
+ .bit = 0x00,
+ },
+};
+
+static struct pmic_table thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = 0x75
+ },
+ {
+ .address = 0x04,
+ .reg = 0x95
+ },
+ {
+ .address = 0x08,
+ .reg = 0x97
+ },
+ {
+ .address = 0x0c,
+ .reg = 0x77
+ },
+ {
+ .address = 0x10,
+ .reg = 0x9a
+ },
+ {
+ .address = 0x14,
+ .reg = 0x9c
+ },
+ {
+ .address = 0x18,
+ .reg = 0x79
+ },
+ {
+ .address = 0x1c,
+ .reg = 0x9f
+ },
+ {
+ .address = 0x20,
+ .reg = 0xa1
+ },
+ {
+ .address = 0x48,
+ .reg = 0x94
+ },
+ {
+ .address = 0x4c,
+ .reg = 0x99
+ },
+ {
+ .address = 0x50,
+ .reg = 0x9e
+ },
+};
+
+static int intel_crc_pmic_get_power(struct regmap *regmap, int reg,
+ int bit, u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & PWR_SOURCE_SELECT) && (data & BIT(bit)) ? 1 : 0;
+ return 0;
+}
+
+static int intel_crc_pmic_update_power(struct regmap *regmap, int reg,
+ int bit, bool on)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ if (on) {
+ data |= PWR_SOURCE_SELECT | BIT(bit);
+ } else {
+ data &= ~BIT(bit);
+ data |= PWR_SOURCE_SELECT;
+ }
+
+ if (regmap_write(regmap, reg, data))
+ return -EIO;
+ return 0;
+}
+
+static int intel_crc_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ int temp_l, temp_h;
+
+ /*
+ * Raw temperature value is 10bits: 8bits in reg
+ * and 2bits in reg-1: bit0,1
+ */
+ if (regmap_read(regmap, reg, &temp_l) ||
+ regmap_read(regmap, reg - 1, &temp_h))
+ return -EIO;
+
+ return temp_l | (temp_h & 0x3) << 8;
+}
+
+static int intel_crc_pmic_update_aux(struct regmap *regmap, int reg, int raw)
+{
+ return regmap_write(regmap, reg, raw) ||
+ regmap_update_bits(regmap, reg - 1, 0x3, raw >> 8) ? -EIO : 0;
+}
+
+static int intel_crc_pmic_get_policy(struct regmap *regmap, int reg, u64 *value)
+{
+ int pen;
+
+ if (regmap_read(regmap, reg, &pen))
+ return -EIO;
+ *value = pen >> 7;
+ return 0;
+}
+
+static int intel_crc_pmic_update_policy(struct regmap *regmap,
+ int reg, int enable)
+{
+ int alert0;
+
+ /* Update to policy enable bit requires unlocking a0lock */
+ if (regmap_read(regmap, PMIC_A0LOCK_REG, &alert0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, PMIC_A0LOCK_REG, 0x01, 0))
+ return -EIO;
+
+ if (regmap_update_bits(regmap, reg, 0x80, enable << 7))
+ return -EIO;
+
+ /* restore alert0 */
+ if (regmap_write(regmap, PMIC_A0LOCK_REG, alert0))
+ return -EIO;
+
+ return 0;
+}
+
+static struct intel_pmic_opregion_data intel_crc_pmic_opregion_data = {
+ .get_power = intel_crc_pmic_get_power,
+ .update_power = intel_crc_pmic_update_power,
+ .get_raw_temp = intel_crc_pmic_get_raw_temp,
+ .update_aux = intel_crc_pmic_update_aux,
+ .get_policy = intel_crc_pmic_get_policy,
+ .update_policy = intel_crc_pmic_update_policy,
+ .power_table = power_table,
+ .power_table_count= ARRAY_SIZE(power_table),
+ .thermal_table = thermal_table,
+ .thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static int intel_crc_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
+ return intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(pdev->dev.parent), pmic->regmap,
+ &intel_crc_pmic_opregion_data);
+}
+
+static struct platform_driver intel_crc_pmic_opregion_driver = {
+ .probe = intel_crc_pmic_opregion_probe,
+ .driver = {
+ .name = "crystal_cove_pmic",
+ },
+};
+
+static int __init intel_crc_pmic_opregion_driver_init(void)
+{
+ return platform_driver_register(&intel_crc_pmic_opregion_driver);
+}
+module_init(intel_crc_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("CrystalCove ACPI opration region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/pmic/intel_pmic_xpower.c b/drivers/acpi/pmic/intel_pmic_xpower.c
new file mode 100644
index 000000000000..6a082d4de12c
--- /dev/null
+++ b/drivers/acpi/pmic/intel_pmic_xpower.c
@@ -0,0 +1,268 @@
+/*
+ * intel_pmic_xpower.c - XPower AXP288 PMIC operation region driver
+ *
+ * Copyright (C) 2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/regmap.h>
+#include <linux/platform_device.h>
+#include <linux/iio/consumer.h>
+#include "intel_pmic.h"
+
+#define XPOWER_GPADC_LOW 0x5b
+
+static struct pmic_table power_table[] = {
+ {
+ .address = 0x00,
+ .reg = 0x13,
+ .bit = 0x05,
+ },
+ {
+ .address = 0x04,
+ .reg = 0x13,
+ .bit = 0x06,
+ },
+ {
+ .address = 0x08,
+ .reg = 0x13,
+ .bit = 0x07,
+ },
+ {
+ .address = 0x0c,
+ .reg = 0x12,
+ .bit = 0x03,
+ },
+ {
+ .address = 0x10,
+ .reg = 0x12,
+ .bit = 0x04,
+ },
+ {
+ .address = 0x14,
+ .reg = 0x12,
+ .bit = 0x05,
+ },
+ {
+ .address = 0x18,
+ .reg = 0x12,
+ .bit = 0x06,
+ },
+ {
+ .address = 0x1c,
+ .reg = 0x12,
+ .bit = 0x00,
+ },
+ {
+ .address = 0x20,
+ .reg = 0x12,
+ .bit = 0x01,
+ },
+ {
+ .address = 0x24,
+ .reg = 0x12,
+ .bit = 0x02,
+ },
+ {
+ .address = 0x28,
+ .reg = 0x13,
+ .bit = 0x02,
+ },
+ {
+ .address = 0x2c,
+ .reg = 0x13,
+ .bit = 0x03,
+ },
+ {
+ .address = 0x30,
+ .reg = 0x13,
+ .bit = 0x04,
+ },
+ {
+ .address = 0x38,
+ .reg = 0x10,
+ .bit = 0x03,
+ },
+ {
+ .address = 0x3c,
+ .reg = 0x10,
+ .bit = 0x06,
+ },
+ {
+ .address = 0x40,
+ .reg = 0x10,
+ .bit = 0x05,
+ },
+ {
+ .address = 0x44,
+ .reg = 0x10,
+ .bit = 0x04,
+ },
+ {
+ .address = 0x48,
+ .reg = 0x10,
+ .bit = 0x01,
+ },
+ {
+ .address = 0x4c,
+ .reg = 0x10,
+ .bit = 0x00
+ },
+};
+
+/* TMP0 - TMP5 are the same, all from GPADC */
+static struct pmic_table thermal_table[] = {
+ {
+ .address = 0x00,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x0c,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x18,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x24,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x30,
+ .reg = XPOWER_GPADC_LOW
+ },
+ {
+ .address = 0x3c,
+ .reg = XPOWER_GPADC_LOW
+ },
+};
+
+static int intel_xpower_pmic_get_power(struct regmap *regmap, int reg,
+ int bit, u64 *value)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ *value = (data & BIT(bit)) ? 1 : 0;
+ return 0;
+}
+
+static int intel_xpower_pmic_update_power(struct regmap *regmap, int reg,
+ int bit, bool on)
+{
+ int data;
+
+ if (regmap_read(regmap, reg, &data))
+ return -EIO;
+
+ if (on)
+ data |= BIT(bit);
+ else
+ data &= ~BIT(bit);
+
+ if (regmap_write(regmap, reg, data))
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * intel_xpower_pmic_get_raw_temp(): Get raw temperature reading from the PMIC
+ *
+ * @regmap: regmap of the PMIC device
+ * @reg: register to get the reading
+ *
+ * We could get the sensor value by manipulating the HW regs here, but since
+ * the axp288 IIO driver may also access the same regs at the same time, the
+ * APIs provided by IIO subsystem are used here instead to avoid problems. As
+ * a result, the two passed in params are of no actual use.
+ *
+ * Return a positive value on success, errno on failure.
+ */
+static int intel_xpower_pmic_get_raw_temp(struct regmap *regmap, int reg)
+{
+ struct iio_channel *gpadc_chan;
+ int ret, val;
+
+ gpadc_chan = iio_channel_get(NULL, "axp288-system-temp");
+ if (IS_ERR_OR_NULL(gpadc_chan))
+ return -EACCES;
+
+ ret = iio_read_channel_raw(gpadc_chan, &val);
+ if (ret < 0)
+ val = ret;
+
+ iio_channel_release(gpadc_chan);
+ return val;
+}
+
+static struct intel_pmic_opregion_data intel_xpower_pmic_opregion_data = {
+ .get_power = intel_xpower_pmic_get_power,
+ .update_power = intel_xpower_pmic_update_power,
+ .get_raw_temp = intel_xpower_pmic_get_raw_temp,
+ .power_table = power_table,
+ .power_table_count = ARRAY_SIZE(power_table),
+ .thermal_table = thermal_table,
+ .thermal_table_count = ARRAY_SIZE(thermal_table),
+};
+
+static acpi_status intel_xpower_pmic_gpio_handler(u32 function,
+ acpi_physical_address address, u32 bit_width, u64 *value,
+ void *handler_context, void *region_context)
+{
+ return AE_OK;
+}
+
+static int intel_xpower_pmic_opregion_probe(struct platform_device *pdev)
+{
+ struct device *parent = pdev->dev.parent;
+ struct axp20x_dev *axp20x = dev_get_drvdata(parent);
+ acpi_status status;
+ int result;
+
+ status = acpi_install_address_space_handler(ACPI_HANDLE(parent),
+ ACPI_ADR_SPACE_GPIO, intel_xpower_pmic_gpio_handler,
+ NULL, NULL);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ result = intel_pmic_install_opregion_handler(&pdev->dev,
+ ACPI_HANDLE(parent), axp20x->regmap,
+ &intel_xpower_pmic_opregion_data);
+ if (result)
+ acpi_remove_address_space_handler(ACPI_HANDLE(parent),
+ ACPI_ADR_SPACE_GPIO,
+ intel_xpower_pmic_gpio_handler);
+
+ return result;
+}
+
+static struct platform_driver intel_xpower_pmic_opregion_driver = {
+ .probe = intel_xpower_pmic_opregion_probe,
+ .driver = {
+ .name = "axp288_pmic_acpi",
+ },
+};
+
+static int __init intel_xpower_pmic_opregion_driver_init(void)
+{
+ return platform_driver_register(&intel_xpower_pmic_opregion_driver);
+}
+module_init(intel_xpower_pmic_opregion_driver_init);
+
+MODULE_DESCRIPTION("XPower AXP288 ACPI operation region driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 17f9ec501972..499536504698 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -334,10 +334,10 @@ static int acpi_processor_get_power_info_default(struct acpi_processor *pr)
static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
{
- acpi_status status = 0;
+ acpi_status status;
u64 count;
int current_count;
- int i;
+ int i, ret = 0;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *cst;
@@ -358,7 +358,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
/* There must be at least 2 elements */
if (!cst || (cst->type != ACPI_TYPE_PACKAGE) || cst->package.count < 2) {
printk(KERN_ERR PREFIX "not enough elements in _CST\n");
- status = -EFAULT;
+ ret = -EFAULT;
goto end;
}
@@ -367,7 +367,7 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
/* Validate number of power states. */
if (count < 1 || count != cst->package.count - 1) {
printk(KERN_ERR PREFIX "count given by _CST is not valid\n");
- status = -EFAULT;
+ ret = -EFAULT;
goto end;
}
@@ -489,12 +489,12 @@ static int acpi_processor_get_power_info_cst(struct acpi_processor *pr)
/* Validate number of power states discovered */
if (current_count < 2)
- status = -EFAULT;
+ ret = -EFAULT;
end:
kfree(buffer.pointer);
- return status;
+ return ret;
}
static void acpi_processor_power_verify_c3(struct acpi_processor *pr,
@@ -985,8 +985,8 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
state->flags = 0;
switch (cx->type) {
case ACPI_STATE_C1:
- if (cx->entry_method == ACPI_CSTATE_FFH)
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
+ if (cx->entry_method != ACPI_CSTATE_FFH)
+ state->flags |= CPUIDLE_FLAG_TIME_INVALID;
state->enter = acpi_idle_enter_c1;
state->enter_dead = acpi_idle_play_dead;
@@ -994,14 +994,12 @@ static int acpi_processor_setup_cpuidle_states(struct acpi_processor *pr)
break;
case ACPI_STATE_C2:
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = acpi_idle_enter_simple;
state->enter_dead = acpi_idle_play_dead;
drv->safe_state_index = count;
break;
case ACPI_STATE_C3:
- state->flags |= CPUIDLE_FLAG_TIME_VALID;
state->enter = pr->flags.bm_check ?
acpi_idle_enter_bm :
acpi_idle_enter_simple;
@@ -1111,7 +1109,7 @@ static int acpi_processor_registered;
int acpi_processor_power_init(struct acpi_processor *pr)
{
- acpi_status status = 0;
+ acpi_status status;
int retval;
struct cpuidle_device *dev;
static int first_run;
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
new file mode 100644
index 000000000000..0d083736e25b
--- /dev/null
+++ b/drivers/acpi/property.c
@@ -0,0 +1,551 @@
+/*
+ * ACPI device specific properties support.
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * All rights reserved.
+ *
+ * Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
+ * Darren Hart <dvhart@linux.intel.com>
+ * Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/export.h>
+
+#include "internal.h"
+
+/* ACPI _DSD device properties UUID: daffd814-6eba-4d8c-8a91-bc9bbf4aa301 */
+static const u8 prp_uuid[16] = {
+ 0x14, 0xd8, 0xff, 0xda, 0xba, 0x6e, 0x8c, 0x4d,
+ 0x8a, 0x91, 0xbc, 0x9b, 0xbf, 0x4a, 0xa3, 0x01
+};
+
+static bool acpi_property_value_ok(const union acpi_object *value)
+{
+ int j;
+
+ /*
+ * The value must be an integer, a string, a reference, or a package
+ * whose every element must be an integer, a string, or a reference.
+ */
+ switch (value->type) {
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ return true;
+
+ case ACPI_TYPE_PACKAGE:
+ for (j = 0; j < value->package.count; j++)
+ switch (value->package.elements[j].type) {
+ case ACPI_TYPE_INTEGER:
+ case ACPI_TYPE_STRING:
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ continue;
+
+ default:
+ return false;
+ }
+
+ return true;
+ }
+ return false;
+}
+
+static bool acpi_properties_format_valid(const union acpi_object *properties)
+{
+ int i;
+
+ for (i = 0; i < properties->package.count; i++) {
+ const union acpi_object *property;
+
+ property = &properties->package.elements[i];
+ /*
+ * Only two elements allowed, the first one must be a string and
+ * the second one has to satisfy certain conditions.
+ */
+ if (property->package.count != 2
+ || property->package.elements[0].type != ACPI_TYPE_STRING
+ || !acpi_property_value_ok(&property->package.elements[1]))
+ return false;
+ }
+ return true;
+}
+
+static void acpi_init_of_compatible(struct acpi_device *adev)
+{
+ const union acpi_object *of_compatible;
+ struct acpi_hardware_id *hwid;
+ bool acpi_of = false;
+ int ret;
+
+ /*
+ * Check if the special PRP0001 ACPI ID is present and in that
+ * case we fill in Device Tree compatible properties for this
+ * device.
+ */
+ list_for_each_entry(hwid, &adev->pnp.ids, list) {
+ if (!strcmp(hwid->id, "PRP0001")) {
+ acpi_of = true;
+ break;
+ }
+ }
+
+ if (!acpi_of)
+ return;
+
+ ret = acpi_dev_get_property_array(adev, "compatible", ACPI_TYPE_STRING,
+ &of_compatible);
+ if (ret) {
+ ret = acpi_dev_get_property(adev, "compatible",
+ ACPI_TYPE_STRING, &of_compatible);
+ if (ret) {
+ acpi_handle_warn(adev->handle,
+ "PRP0001 requires compatible property\n");
+ return;
+ }
+ }
+ adev->data.of_compatible = of_compatible;
+}
+
+void acpi_init_properties(struct acpi_device *adev)
+{
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ const union acpi_object *desc;
+ acpi_status status;
+ int i;
+
+ status = acpi_evaluate_object_typed(adev->handle, "_DSD", NULL, &buf,
+ ACPI_TYPE_PACKAGE);
+ if (ACPI_FAILURE(status))
+ return;
+
+ desc = buf.pointer;
+ if (desc->package.count % 2)
+ goto fail;
+
+ /* Look for the device properties UUID. */
+ for (i = 0; i < desc->package.count; i += 2) {
+ const union acpi_object *uuid, *properties;
+
+ uuid = &desc->package.elements[i];
+ properties = &desc->package.elements[i + 1];
+
+ /*
+ * The first element must be a UUID and the second one must be
+ * a package.
+ */
+ if (uuid->type != ACPI_TYPE_BUFFER || uuid->buffer.length != 16
+ || properties->type != ACPI_TYPE_PACKAGE)
+ break;
+
+ if (memcmp(uuid->buffer.pointer, prp_uuid, sizeof(prp_uuid)))
+ continue;
+
+ /*
+ * We found the matching UUID. Now validate the format of the
+ * package immediately following it.
+ */
+ if (!acpi_properties_format_valid(properties))
+ break;
+
+ adev->data.pointer = buf.pointer;
+ adev->data.properties = properties;
+
+ acpi_init_of_compatible(adev);
+ return;
+ }
+
+ fail:
+ dev_warn(&adev->dev, "Returned _DSD data is not valid, skipping\n");
+ ACPI_FREE(buf.pointer);
+}
+
+void acpi_free_properties(struct acpi_device *adev)
+{
+ ACPI_FREE((void *)adev->data.pointer);
+ adev->data.of_compatible = NULL;
+ adev->data.pointer = NULL;
+ adev->data.properties = NULL;
+}
+
+/**
+ * acpi_dev_get_property - return an ACPI property with given name
+ * @adev: ACPI device to get property
+ * @name: Name of the property
+ * @type: Expected property type
+ * @obj: Location to store the property value (if not %NULL)
+ *
+ * Look up a property with @name and store a pointer to the resulting ACPI
+ * object at the location pointed to by @obj if found.
+ *
+ * Callers must not attempt to free the returned objects. These objects will be
+ * freed by the ACPI core automatically during the removal of @adev.
+ *
+ * Return: %0 if property with @name has been found (success),
+ * %-EINVAL if the arguments are invalid,
+ * %-ENODATA if the property doesn't exist,
+ * %-EPROTO if the property value type doesn't match @type.
+ */
+int acpi_dev_get_property(struct acpi_device *adev, const char *name,
+ acpi_object_type type, const union acpi_object **obj)
+{
+ const union acpi_object *properties;
+ int i;
+
+ if (!adev || !name)
+ return -EINVAL;
+
+ if (!adev->data.pointer || !adev->data.properties)
+ return -ENODATA;
+
+ properties = adev->data.properties;
+ for (i = 0; i < properties->package.count; i++) {
+ const union acpi_object *propname, *propvalue;
+ const union acpi_object *property;
+
+ property = &properties->package.elements[i];
+
+ propname = &property->package.elements[0];
+ propvalue = &property->package.elements[1];
+
+ if (!strcmp(name, propname->string.pointer)) {
+ if (type != ACPI_TYPE_ANY && propvalue->type != type)
+ return -EPROTO;
+ else if (obj)
+ *obj = propvalue;
+
+ return 0;
+ }
+ }
+ return -ENODATA;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_property);
+
+/**
+ * acpi_dev_get_property_array - return an ACPI array property with given name
+ * @adev: ACPI device to get property
+ * @name: Name of the property
+ * @type: Expected type of array elements
+ * @obj: Location to store a pointer to the property value (if not NULL)
+ *
+ * Look up an array property with @name and store a pointer to the resulting
+ * ACPI object at the location pointed to by @obj if found.
+ *
+ * Callers must not attempt to free the returned objects. Those objects will be
+ * freed by the ACPI core automatically during the removal of @adev.
+ *
+ * Return: %0 if array property (package) with @name has been found (success),
+ * %-EINVAL if the arguments are invalid,
+ * %-ENODATA if the property doesn't exist,
+ * %-EPROTO if the property is not a package or the type of its elements
+ * doesn't match @type.
+ */
+int acpi_dev_get_property_array(struct acpi_device *adev, const char *name,
+ acpi_object_type type,
+ const union acpi_object **obj)
+{
+ const union acpi_object *prop;
+ int ret, i;
+
+ ret = acpi_dev_get_property(adev, name, ACPI_TYPE_PACKAGE, &prop);
+ if (ret)
+ return ret;
+
+ if (type != ACPI_TYPE_ANY) {
+ /* Check that all elements are of correct type. */
+ for (i = 0; i < prop->package.count; i++)
+ if (prop->package.elements[i].type != type)
+ return -EPROTO;
+ }
+ if (obj)
+ *obj = prop;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_property_array);
+
+/**
+ * acpi_dev_get_property_reference - returns handle to the referenced object
+ * @adev: ACPI device to get property
+ * @name: Name of the property
+ * @index: Index of the reference to return
+ * @args: Location to store the returned reference with optional arguments
+ *
+ * Find property with @name, verifify that it is a package containing at least
+ * one object reference and if so, store the ACPI device object pointer to the
+ * target object in @args->adev. If the reference includes arguments, store
+ * them in the @args->args[] array.
+ *
+ * If there's more than one reference in the property value package, @index is
+ * used to select the one to return.
+ *
+ * Return: %0 on success, negative error code on failure.
+ */
+int acpi_dev_get_property_reference(struct acpi_device *adev,
+ const char *name, size_t index,
+ struct acpi_reference_args *args)
+{
+ const union acpi_object *element, *end;
+ const union acpi_object *obj;
+ struct acpi_device *device;
+ int ret, idx = 0;
+
+ ret = acpi_dev_get_property(adev, name, ACPI_TYPE_ANY, &obj);
+ if (ret)
+ return ret;
+
+ /*
+ * The simplest case is when the value is a single reference. Just
+ * return that reference then.
+ */
+ if (obj->type == ACPI_TYPE_LOCAL_REFERENCE) {
+ if (index)
+ return -EINVAL;
+
+ ret = acpi_bus_get_device(obj->reference.handle, &device);
+ if (ret)
+ return ret;
+
+ args->adev = device;
+ args->nargs = 0;
+ return 0;
+ }
+
+ /*
+ * If it is not a single reference, then it is a package of
+ * references followed by number of ints as follows:
+ *
+ * Package () { REF, INT, REF, INT, INT }
+ *
+ * The index argument is then used to determine which reference
+ * the caller wants (along with the arguments).
+ */
+ if (obj->type != ACPI_TYPE_PACKAGE || index >= obj->package.count)
+ return -EPROTO;
+
+ element = obj->package.elements;
+ end = element + obj->package.count;
+
+ while (element < end) {
+ u32 nargs, i;
+
+ if (element->type != ACPI_TYPE_LOCAL_REFERENCE)
+ return -EPROTO;
+
+ ret = acpi_bus_get_device(element->reference.handle, &device);
+ if (ret)
+ return -ENODEV;
+
+ element++;
+ nargs = 0;
+
+ /* assume following integer elements are all args */
+ for (i = 0; element + i < end; i++) {
+ int type = element[i].type;
+
+ if (type == ACPI_TYPE_INTEGER)
+ nargs++;
+ else if (type == ACPI_TYPE_LOCAL_REFERENCE)
+ break;
+ else
+ return -EPROTO;
+ }
+
+ if (idx++ == index) {
+ args->adev = device;
+ args->nargs = nargs;
+ for (i = 0; i < nargs; i++)
+ args->args[i] = element[i].integer.value;
+
+ return 0;
+ }
+
+ element += nargs;
+ }
+
+ return -EPROTO;
+}
+EXPORT_SYMBOL_GPL(acpi_dev_get_property_reference);
+
+int acpi_dev_prop_get(struct acpi_device *adev, const char *propname,
+ void **valptr)
+{
+ return acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
+ (const union acpi_object **)valptr);
+}
+
+int acpi_dev_prop_read_single(struct acpi_device *adev, const char *propname,
+ enum dev_prop_type proptype, void *val)
+{
+ const union acpi_object *obj;
+ int ret;
+
+ if (!val)
+ return -EINVAL;
+
+ if (proptype >= DEV_PROP_U8 && proptype <= DEV_PROP_U64) {
+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_INTEGER, &obj);
+ if (ret)
+ return ret;
+
+ switch (proptype) {
+ case DEV_PROP_U8:
+ if (obj->integer.value > U8_MAX)
+ return -EOVERFLOW;
+ *(u8 *)val = obj->integer.value;
+ break;
+ case DEV_PROP_U16:
+ if (obj->integer.value > U16_MAX)
+ return -EOVERFLOW;
+ *(u16 *)val = obj->integer.value;
+ break;
+ case DEV_PROP_U32:
+ if (obj->integer.value > U32_MAX)
+ return -EOVERFLOW;
+ *(u32 *)val = obj->integer.value;
+ break;
+ default:
+ *(u64 *)val = obj->integer.value;
+ break;
+ }
+ } else if (proptype == DEV_PROP_STRING) {
+ ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_STRING, &obj);
+ if (ret)
+ return ret;
+
+ *(char **)val = obj->string.pointer;
+ } else {
+ ret = -EINVAL;
+ }
+ return ret;
+}
+
+static int acpi_copy_property_array_u8(const union acpi_object *items, u8 *val,
+ size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+ if (items[i].integer.value > U8_MAX)
+ return -EOVERFLOW;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_u16(const union acpi_object *items,
+ u16 *val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+ if (items[i].integer.value > U16_MAX)
+ return -EOVERFLOW;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_u32(const union acpi_object *items,
+ u32 *val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+ if (items[i].integer.value > U32_MAX)
+ return -EOVERFLOW;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_u64(const union acpi_object *items,
+ u64 *val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_INTEGER)
+ return -EPROTO;
+
+ val[i] = items[i].integer.value;
+ }
+ return 0;
+}
+
+static int acpi_copy_property_array_string(const union acpi_object *items,
+ char **val, size_t nval)
+{
+ int i;
+
+ for (i = 0; i < nval; i++) {
+ if (items[i].type != ACPI_TYPE_STRING)
+ return -EPROTO;
+
+ val[i] = items[i].string.pointer;
+ }
+ return 0;
+}
+
+int acpi_dev_prop_read(struct acpi_device *adev, const char *propname,
+ enum dev_prop_type proptype, void *val, size_t nval)
+{
+ const union acpi_object *obj;
+ const union acpi_object *items;
+ int ret;
+
+ if (val && nval == 1) {
+ ret = acpi_dev_prop_read_single(adev, propname, proptype, val);
+ if (!ret)
+ return ret;
+ }
+
+ ret = acpi_dev_get_property_array(adev, propname, ACPI_TYPE_ANY, &obj);
+ if (ret)
+ return ret;
+
+ if (!val)
+ return obj->package.count;
+ else if (nval <= 0)
+ return -EINVAL;
+
+ if (nval > obj->package.count)
+ return -EOVERFLOW;
+
+ items = obj->package.elements;
+ switch (proptype) {
+ case DEV_PROP_U8:
+ ret = acpi_copy_property_array_u8(items, (u8 *)val, nval);
+ break;
+ case DEV_PROP_U16:
+ ret = acpi_copy_property_array_u16(items, (u16 *)val, nval);
+ break;
+ case DEV_PROP_U32:
+ ret = acpi_copy_property_array_u32(items, (u32 *)val, nval);
+ break;
+ case DEV_PROP_U64:
+ ret = acpi_copy_property_array_u64(items, (u64 *)val, nval);
+ break;
+ case DEV_PROP_STRING:
+ ret = acpi_copy_property_array_string(items, (char **)val, nval);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 0476e90b2091..1b1cf558d3d3 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -36,6 +36,8 @@ bool acpi_force_hot_remove;
static const char *dummy_hid = "device";
+static LIST_HEAD(acpi_dep_list);
+static DEFINE_MUTEX(acpi_dep_list_lock);
static LIST_HEAD(acpi_bus_id_list);
static DEFINE_MUTEX(acpi_scan_lock);
static LIST_HEAD(acpi_scan_handlers_list);
@@ -43,6 +45,12 @@ DEFINE_MUTEX(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
static DEFINE_MUTEX(acpi_hp_context_lock);
+struct acpi_dep_data {
+ struct list_head node;
+ acpi_handle master;
+ acpi_handle slave;
+};
+
struct acpi_device_bus_id{
char bus_id[15];
unsigned int instance_no;
@@ -124,17 +132,56 @@ static int create_modalias(struct acpi_device *acpi_dev, char *modalias,
if (list_empty(&acpi_dev->pnp.ids))
return 0;
- len = snprintf(modalias, size, "acpi:");
- size -= len;
-
- list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
- count = snprintf(&modalias[len], size, "%s:", id->id);
- if (count < 0)
- return -EINVAL;
- if (count >= size)
- return -ENOMEM;
- len += count;
- size -= count;
+ /*
+ * If the device has PRP0001 we expose DT compatible modalias
+ * instead in form of of:NnameTCcompatible.
+ */
+ if (acpi_dev->data.of_compatible) {
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+ const union acpi_object *of_compatible, *obj;
+ int i, nval;
+ char *c;
+
+ acpi_get_name(acpi_dev->handle, ACPI_SINGLE_NAME, &buf);
+ /* DT strings are all in lower case */
+ for (c = buf.pointer; *c != '\0'; c++)
+ *c = tolower(*c);
+
+ len = snprintf(modalias, size, "of:N%sT", (char *)buf.pointer);
+ ACPI_FREE(buf.pointer);
+
+ of_compatible = acpi_dev->data.of_compatible;
+ if (of_compatible->type == ACPI_TYPE_PACKAGE) {
+ nval = of_compatible->package.count;
+ obj = of_compatible->package.elements;
+ } else { /* Must be ACPI_TYPE_STRING. */
+ nval = 1;
+ obj = of_compatible;
+ }
+ for (i = 0; i < nval; i++, obj++) {
+ count = snprintf(&modalias[len], size, "C%s",
+ obj->string.pointer);
+ if (count < 0)
+ return -EINVAL;
+ if (count >= size)
+ return -ENOMEM;
+
+ len += count;
+ size -= count;
+ }
+ } else {
+ len = snprintf(modalias, size, "acpi:");
+ size -= len;
+
+ list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
+ count = snprintf(&modalias[len], size, "%s:", id->id);
+ if (count < 0)
+ return -EINVAL;
+ if (count >= size)
+ return -ENOMEM;
+ len += count;
+ size -= count;
+ }
}
modalias[len] = '\0';
@@ -902,6 +949,51 @@ int acpi_match_device_ids(struct acpi_device *device,
}
EXPORT_SYMBOL(acpi_match_device_ids);
+/* Performs match against special "PRP0001" shoehorn ACPI ID */
+static bool acpi_of_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ const union acpi_object *of_compatible, *obj;
+ struct acpi_device *adev;
+ int i, nval;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return false;
+
+ of_compatible = adev->data.of_compatible;
+ if (!drv->of_match_table || !of_compatible)
+ return false;
+
+ if (of_compatible->type == ACPI_TYPE_PACKAGE) {
+ nval = of_compatible->package.count;
+ obj = of_compatible->package.elements;
+ } else { /* Must be ACPI_TYPE_STRING. */
+ nval = 1;
+ obj = of_compatible;
+ }
+ /* Now we can look for the driver DT compatible strings */
+ for (i = 0; i < nval; i++, obj++) {
+ const struct of_device_id *id;
+
+ for (id = drv->of_match_table; id->compatible[0]; id++)
+ if (!strcasecmp(obj->string.pointer, id->compatible))
+ return true;
+ }
+
+ return false;
+}
+
+bool acpi_driver_match_device(struct device *dev,
+ const struct device_driver *drv)
+{
+ if (!drv->acpi_match_table)
+ return acpi_of_driver_match_device(dev, drv);
+
+ return !!acpi_match_device(drv->acpi_match_table, dev);
+}
+EXPORT_SYMBOL_GPL(acpi_driver_match_device);
+
static void acpi_free_power_resources_lists(struct acpi_device *device)
{
int i;
@@ -922,6 +1014,7 @@ static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
+ acpi_free_properties(acpi_dev);
acpi_free_pnp_ids(&acpi_dev->pnp);
acpi_free_power_resources_lists(acpi_dev);
kfree(acpi_dev);
@@ -1304,6 +1397,26 @@ int acpi_device_add(struct acpi_device *device,
return result;
}
+struct acpi_device *acpi_get_next_child(struct device *dev,
+ struct acpi_device *child)
+{
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ struct list_head *head, *next;
+
+ if (!adev)
+ return NULL;
+
+ head = &adev->children;
+ if (list_empty(head))
+ return NULL;
+
+ if (!child)
+ return list_first_entry(head, struct acpi_device, node);
+
+ next = child->node.next;
+ return next == head ? NULL : list_entry(next, struct acpi_device, node);
+}
+
/* --------------------------------------------------------------------------
Driver Management
-------------------------------------------------------------------------- */
@@ -1923,9 +2036,11 @@ void acpi_init_device_object(struct acpi_device *device, acpi_handle handle,
device->device_type = type;
device->handle = handle;
device->parent = acpi_bus_get_parent(handle);
+ device->fwnode.type = FWNODE_ACPI;
acpi_set_device_status(device, sta);
acpi_device_get_busid(device);
acpi_set_pnp_ids(handle, &device->pnp, type);
+ acpi_init_properties(device);
acpi_bus_get_flags(device);
device->flags.match_driver = false;
device->flags.initialized = true;
@@ -2086,6 +2201,59 @@ static void acpi_scan_init_hotplug(struct acpi_device *adev)
}
}
+static void acpi_device_dep_initialize(struct acpi_device *adev)
+{
+ struct acpi_dep_data *dep;
+ struct acpi_handle_list dep_devices;
+ acpi_status status;
+ int i;
+
+ if (!acpi_has_method(adev->handle, "_DEP"))
+ return;
+
+ status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
+ &dep_devices);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&adev->dev, "Failed to evaluate _DEP.\n");
+ return;
+ }
+
+ for (i = 0; i < dep_devices.count; i++) {
+ struct acpi_device_info *info;
+ int skip;
+
+ status = acpi_get_object_info(dep_devices.handles[i], &info);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&adev->dev, "Error reading device info\n");
+ continue;
+ }
+
+ /*
+ * Skip the dependency of Windows System Power
+ * Management Controller
+ */
+ skip = info->valid & ACPI_VALID_HID &&
+ !strcmp(info->hardware_id.string, "INT3396");
+
+ kfree(info);
+
+ if (skip)
+ continue;
+
+ dep = kzalloc(sizeof(struct acpi_dep_data), GFP_KERNEL);
+ if (!dep)
+ return;
+
+ dep->master = dep_devices.handles[i];
+ dep->slave = adev->handle;
+ adev->dep_unmet++;
+
+ mutex_lock(&acpi_dep_list_lock);
+ list_add_tail(&dep->node , &acpi_dep_list);
+ mutex_unlock(&acpi_dep_list_lock);
+ }
+}
+
static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
void *not_used, void **return_value)
{
@@ -2112,6 +2280,7 @@ static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl_not_used,
return AE_CTRL_DEPTH;
acpi_scan_init_hotplug(device);
+ acpi_device_dep_initialize(device);
out:
if (!*return_value)
@@ -2232,6 +2401,29 @@ static void acpi_bus_attach(struct acpi_device *device)
device->handler->hotplug.notify_online(device);
}
+void acpi_walk_dep_device_list(acpi_handle handle)
+{
+ struct acpi_dep_data *dep, *tmp;
+ struct acpi_device *adev;
+
+ mutex_lock(&acpi_dep_list_lock);
+ list_for_each_entry_safe(dep, tmp, &acpi_dep_list, node) {
+ if (dep->master == handle) {
+ acpi_bus_get_device(dep->slave, &adev);
+ if (!adev)
+ continue;
+
+ adev->dep_unmet--;
+ if (!adev->dep_unmet)
+ acpi_bus_attach(adev);
+ list_del(&dep->node);
+ kfree(dep);
+ }
+ }
+ mutex_unlock(&acpi_dep_list_lock);
+}
+EXPORT_SYMBOL_GPL(acpi_walk_dep_device_list);
+
/**
* acpi_bus_scan - Add ACPI device node objects in a given namespace scope.
* @handle: Root of the namespace scope to scan.
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 05a31b573fc3..8aa9254a387f 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -630,6 +630,7 @@ static int acpi_freeze_begin(void)
static int acpi_freeze_prepare(void)
{
acpi_enable_all_wakeup_gpes();
+ acpi_os_wait_events_complete();
enable_irq_wake(acpi_gbl_FADT.sci_interrupt);
return 0;
}
@@ -825,6 +826,7 @@ static void acpi_power_off_prepare(void)
/* Prepare to power off the system */
acpi_sleep_prepare(ACPI_STATE_S5);
acpi_disable_all_gpes();
+ acpi_os_wait_events_complete();
}
static void acpi_power_off(void)
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 6d5a6cda0734..93b81523a2fe 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -190,30 +190,24 @@ void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
}
}
-
int __init
-acpi_table_parse_entries(char *id,
- unsigned long table_size,
- int entry_id,
- acpi_tbl_entry_handler handler,
- unsigned int max_entries)
+acpi_parse_entries(char *id, unsigned long table_size,
+ acpi_tbl_entry_handler handler,
+ struct acpi_table_header *table_header,
+ int entry_id, unsigned int max_entries)
{
- struct acpi_table_header *table_header = NULL;
struct acpi_subtable_header *entry;
- unsigned int count = 0;
+ int count = 0;
unsigned long table_end;
- acpi_size tbl_size;
if (acpi_disabled)
return -ENODEV;
- if (!handler)
+ if (!id || !handler)
return -EINVAL;
- if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
- acpi_get_table_with_size(id, acpi_apic_instance, &table_header, &tbl_size);
- else
- acpi_get_table_with_size(id, 0, &table_header, &tbl_size);
+ if (!table_size)
+ return -EINVAL;
if (!table_header) {
pr_warn("%4.4s not present\n", id);
@@ -230,9 +224,12 @@ acpi_table_parse_entries(char *id,
while (((unsigned long)entry) + sizeof(struct acpi_subtable_header) <
table_end) {
if (entry->type == entry_id
- && (!max_entries || count++ < max_entries))
+ && (!max_entries || count < max_entries)) {
if (handler(entry, table_end))
- goto err;
+ return -EINVAL;
+
+ count++;
+ }
/*
* If entry->length is 0, break from this loop to avoid
@@ -240,22 +237,53 @@ acpi_table_parse_entries(char *id,
*/
if (entry->length == 0) {
pr_err("[%4.4s:0x%02x] Invalid zero length\n", id, entry_id);
- goto err;
+ return -EINVAL;
}
entry = (struct acpi_subtable_header *)
((unsigned long)entry + entry->length);
}
+
if (max_entries && count > max_entries) {
pr_warn("[%4.4s:0x%02x] ignored %i entries of %i found\n",
id, entry_id, count - max_entries, count);
}
- early_acpi_os_unmap_memory((char *)table_header, tbl_size);
return count;
-err:
+}
+
+int __init
+acpi_table_parse_entries(char *id,
+ unsigned long table_size,
+ int entry_id,
+ acpi_tbl_entry_handler handler,
+ unsigned int max_entries)
+{
+ struct acpi_table_header *table_header = NULL;
+ acpi_size tbl_size;
+ int count;
+ u32 instance = 0;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ if (!id || !handler)
+ return -EINVAL;
+
+ if (!strncmp(id, ACPI_SIG_MADT, 4))
+ instance = acpi_apic_instance;
+
+ acpi_get_table_with_size(id, instance, &table_header, &tbl_size);
+ if (!table_header) {
+ pr_warn("%4.4s not present\n", id);
+ return -ENODEV;
+ }
+
+ count = acpi_parse_entries(id, table_size, handler, table_header,
+ entry_id, max_entries);
+
early_acpi_os_unmap_memory((char *)table_header, tbl_size);
- return -EINVAL;
+ return count;
}
int __init
diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c
index 371ac12d25b1..dd8ff63ee2b4 100644
--- a/drivers/acpi/utils.c
+++ b/drivers/acpi/utils.c
@@ -136,8 +136,7 @@ acpi_extract_package(union acpi_object *package,
break;
case 'B':
size_required +=
- sizeof(u8 *) +
- (element->buffer.length * sizeof(u8));
+ sizeof(u8 *) + element->buffer.length;
tail_offset += sizeof(u8 *);
break;
default:
@@ -255,7 +254,7 @@ acpi_extract_package(union acpi_object *package,
memcpy(tail, element->buffer.pointer,
element->buffer.length);
head += sizeof(u8 *);
- tail += element->buffer.length * sizeof(u8);
+ tail += element->buffer.length;
break;
default:
/* Should never get here */
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 9d75ead2a1f9..185a57d13723 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1681,6 +1681,19 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device)
printk(KERN_ERR PREFIX "Create sysfs link\n");
}
+static void acpi_video_run_bcl_for_osi(struct acpi_video_bus *video)
+{
+ struct acpi_video_device *dev;
+ union acpi_object *levels;
+
+ mutex_lock(&video->device_list_lock);
+ list_for_each_entry(dev, &video->video_device_list, entry) {
+ if (!acpi_video_device_lcd_query_levels(dev, &levels))
+ kfree(levels);
+ }
+ mutex_unlock(&video->device_list_lock);
+}
+
static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
{
struct acpi_video_device *dev;
@@ -1688,6 +1701,8 @@ static int acpi_video_bus_register_backlight(struct acpi_video_bus *video)
if (video->backlight_registered)
return 0;
+ acpi_video_run_bcl_for_osi(video);
+
if (!acpi_video_verify_backlight_support())
return 0;