diff options
| author | Mika Westerberg <mika.westerberg@linux.intel.com> | 2017-06-05 11:39:19 +0300 |
|---|---|---|
| committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2017-06-12 15:58:39 +0300 |
| commit | 97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f (patch) | |
| tree | e9ae63beb8b3e3b2cbf1a07c91b31c19c4d55a76 /drivers/acpi/acpica/utresrc.c | |
| parent | 2b72693066a867ac073a657e871bb64391b4ffdb (diff) | |
| download | linux-97028ce6fca0fec53ee71e2fd5acfb2dc8430f1f.tar.xz | |
ACPICA: ACPI 6.2: Add support for PinConfig() resource
ACPICA commit a06fdba686cefccd5dd5b93b52fa0f1e3f984906
ACPI 6.2 introduced a new resource that is used to specify fine-grained
configuration of a pin or set of pins used by a device. The ASL syntax of
this new resource looks like:
PinConfig (Shared/Exclusive, PinConfigType, PinConfigValue,
ResourceSource, ResourceSourceIndex, ResourceUsage,
DescriptorName, Vendordata) {Pin List}
PinConfigType is an integer with following accepted values:
0x00 (Default) - No configuration is applied to the pin
0x01 (Bias Pull-up) - Pin is pulled up using certain size resistor
0x02 (Bias Pull-down) - Pin is pulled down using certain size resistor
0x03 (Bias Default) - Set to default biasing
0x04 (Bias Disable) - All bias settings will be disabled
0x05 (Bias High Impedance) - Configure the pin as hi_z
0x06 (Bias Bus Hold) - Configure the pin in a weak latch state where
it drives the last value on a tristate bus
0x07 (Drive Open Drain) - Configure the pin into open drain state
0x08 (Drive Open Source) - Configure the pin into open source state
0x09 (Drive Push Pull) - Configure the pin into push-pull state
0x0a (Drive Strength) - How much the pin can supply current
0x0b (Slew Rate) - Configure slew rate of the pin
0x0c (Input Debounce) - Enable input debouncer for the pin
0x0d (Input Schmitt Trigger) - Enable schmitt trigger for the pin
0x0e - 0x7f - Reserved
0x80 - 0xff - Vendor defined types
The PinConfigValue depends on the type and is expressed as units
suitable for that type (for example bias uses Ohms).
Link: https://github.com/acpica/acpica/commit/a06fdba6
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'drivers/acpi/acpica/utresrc.c')
| -rw-r--r-- | drivers/acpi/acpica/utresrc.c | 23 |
1 files changed, 22 insertions, 1 deletions
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 8dd09952b826..2d3e9888837d 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -291,6 +291,25 @@ const char *acpi_gbl_pt_decode[] = { "/* UNKNOWN parity keyword */" }; +/* pin_config type */ + +const char *acpi_gbl_ptyp_decode[] = { + "Default", + "Bias Pull-up", + "Bias Pull-down", + "Bias Default", + "Bias Disable", + "Bias High Impedance", + "Bias Bus Hold", + "Drive Open Drain", + "Drive Open Source", + "Drive Push Pull", + "Drive Strength", + "Slew Rate", + "Input Debounce", + "Input Schmitt Trigger", +}; + #endif /* @@ -334,6 +353,7 @@ const u8 acpi_gbl_resource_aml_sizes[] = { ACPI_AML_SIZE_LARGE(struct aml_resource_gpio), ACPI_AML_SIZE_LARGE(struct aml_resource_pin_function), ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus), + ACPI_AML_SIZE_LARGE(struct aml_resource_pin_config), }; const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = { @@ -385,7 +405,8 @@ static const u8 acpi_gbl_resource_types[] = { ACPI_FIXED_LENGTH, /* 0B Extended* address */ ACPI_VARIABLE_LENGTH, /* 0C Gpio* */ ACPI_VARIABLE_LENGTH, /* 0D pin_function */ - ACPI_VARIABLE_LENGTH /* 0E *serial_bus */ + ACPI_VARIABLE_LENGTH, /* 0E *serial_bus */ + ACPI_VARIABLE_LENGTH, /* 0F pin_config */ }; /******************************************************************************* |