diff options
author | Ajay Joshi <ajay.joshi@wdc.com> | 2019-10-27 17:05:45 +0300 |
---|---|---|
committer | Jens Axboe <axboe@kernel.dk> | 2019-11-07 16:31:48 +0300 |
commit | 6c1b1da58f8c7a697a88ae35afeba196fc7b701e (patch) | |
tree | 03a8d6592cc3ea609d37c989fa5c1a533d7b66d6 /block/blk-zoned.c | |
parent | c7a1d926dc4076aadad187614500afcd8de78818 (diff) | |
download | linux-6c1b1da58f8c7a697a88ae35afeba196fc7b701e.tar.xz |
block: add zone open, close and finish operations
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
actively be written
* Close a zone: Transition to closed condition to release the drive
resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
condition to prevent write operations
To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.
Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Diffstat (limited to 'block/blk-zoned.c')
-rw-r--r-- | block/blk-zoned.c | 35 |
1 files changed, 21 insertions, 14 deletions
diff --git a/block/blk-zoned.c b/block/blk-zoned.c index 14785011e798..dab34dc48fb6 100644 --- a/block/blk-zoned.c +++ b/block/blk-zoned.c @@ -221,23 +221,27 @@ static inline bool blkdev_allow_reset_all_zones(struct block_device *bdev, } /** - * blkdev_reset_zones - Reset zones write pointer + * blkdev_zone_mgmt - Execute a zone management operation on a range of zones * @bdev: Target block device - * @sector: Start sector of the first zone to reset - * @nr_sectors: Number of sectors, at least the length of one zone + * @op: Operation to be performed on the zones + * @sector: Start sector of the first zone to operate on + * @nr_sectors: Number of sectors, should be at least the length of one zone and + * must be zone size aligned. * @gfp_mask: Memory allocation flags (for bio_alloc) * * Description: - * Reset the write pointer of the zones contained in the range + * Perform the specified operation on the range of zones specified by * @sector..@sector+@nr_sectors. Specifying the entire disk sector range * is valid, but the specified range should not contain conventional zones. + * The operation to execute on each zone can be a zone reset, open, close + * or finish request. */ -int blkdev_reset_zones(struct block_device *bdev, - sector_t sector, sector_t nr_sectors, - gfp_t gfp_mask) +int blkdev_zone_mgmt(struct block_device *bdev, enum req_opf op, + sector_t sector, sector_t nr_sectors, + gfp_t gfp_mask) { struct request_queue *q = bdev_get_queue(bdev); - sector_t zone_sectors; + sector_t zone_sectors = blk_queue_zone_sectors(q); sector_t end_sector = sector + nr_sectors; struct bio *bio = NULL; int ret; @@ -248,12 +252,14 @@ int blkdev_reset_zones(struct block_device *bdev, if (bdev_read_only(bdev)) return -EPERM; + if (!op_is_zone_mgmt(op)) + return -EOPNOTSUPP; + if (!nr_sectors || end_sector > bdev->bd_part->nr_sects) /* Out of range */ return -EINVAL; /* Check alignment (handle eventual smaller last zone) */ - zone_sectors = blk_queue_zone_sectors(q); if (sector & (zone_sectors - 1)) return -EINVAL; @@ -269,12 +275,13 @@ int blkdev_reset_zones(struct block_device *bdev, * Special case for the zone reset operation that reset all * zones, this is useful for applications like mkfs. */ - if (blkdev_allow_reset_all_zones(bdev, sector, nr_sectors)) { + if (op == REQ_OP_ZONE_RESET && + blkdev_allow_reset_all_zones(bdev, sector, nr_sectors)) { bio->bi_opf = REQ_OP_ZONE_RESET_ALL; break; } - bio->bi_opf = REQ_OP_ZONE_RESET; + bio->bi_opf = op; bio->bi_iter.bi_sector = sector; sector += zone_sectors; @@ -287,7 +294,7 @@ int blkdev_reset_zones(struct block_device *bdev, return ret; } -EXPORT_SYMBOL_GPL(blkdev_reset_zones); +EXPORT_SYMBOL_GPL(blkdev_zone_mgmt); /* * BLKREPORTZONE ioctl processing. @@ -379,8 +386,8 @@ int blkdev_reset_zones_ioctl(struct block_device *bdev, fmode_t mode, if (copy_from_user(&zrange, argp, sizeof(struct blk_zone_range))) return -EFAULT; - return blkdev_reset_zones(bdev, zrange.sector, zrange.nr_sectors, - GFP_KERNEL); + return blkdev_zone_mgmt(bdev, REQ_OP_ZONE_RESET, + zrange.sector, zrange.nr_sectors, GFP_KERNEL); } static inline unsigned long *blk_alloc_zone_bitmap(int node, |