diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-03 01:42:51 +0400 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-03 01:42:51 +0400 |
| commit | 42daabf62bfa3c00974b43f030dadcf704c0db59 (patch) | |
| tree | 255f279cad48557227d974d67cbbc8390d057404 /arch | |
| parent | 0bf6a210a43f7118d858806200127e421649fc4e (diff) | |
| parent | 8c3d913888cfb0066d62831969c3a992f7e4aba5 (diff) | |
| download | linux-42daabf62bfa3c00974b43f030dadcf704c0db59.tar.xz | |
Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late changes from Arnd Bergmann:
"These are changes that arrived a little late before the merge window
or that have multiple dependencies on previous branches so they did
not fit into one of the earlier ones. There are 10 branches merged
here, a total of 39 non-merge commits. Contents are a mixed bag for
the above reasons:
* Two new SoC platforms: ST microelectronics stixxxx and the TI
'Nspire' graphing calculator. These should have been in the 'soc'
branch but were a little late
* Support for the Exynos 5420 variant in mach-exynos, which is based
on the other exynos branches to avoid conflicts.
* Various small changes for sh-mobile, ux500 and davinci
* Common clk support for MSM"
* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
ARM: ux500: bail out on alien cpus
ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
serial: sh-sci: Initialise variables before access in sci_set_termios()
ARM: stih41x: Add B2020 board support
ARM: stih41x: Add B2000 board support
ARM: sti: Add DEBUG_LL console support
ARM: sti: Add STiH416 SOC support
ARM: sti: Add STiH415 SOC support
ARM: msm: Migrate to common clock framework
ARM: msm: Make proc_comm clock control into a platform driver
ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
ARM: msm: Remove clock-7x30.h include file
ARM: msm: Remove custom clk_set_{max,min}_rate() API
ARM: msm: Remove custom clk_set_flags() API
msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
msm: iommu: Convert to clk_prepare/unprepare
msm_sdcc: Convert to clk_prepare/unprepare
usb: otg: msm: Convert to clk_prepare/unprepare
msm_serial: Use devm_clk_get() and properly return errors
msm_serial: Convert to clk_prepare/unprepare
...
Diffstat (limited to 'arch')
73 files changed, 3452 insertions, 704 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 49fdc432512f..de7049bdea85 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -625,8 +625,8 @@ config ARCH_MSM bool "Qualcomm MSM" select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_CLOCKEVENTS - select HAVE_CLK help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory @@ -969,6 +969,8 @@ source "arch/arm/mach-netx/Kconfig" source "arch/arm/mach-nomadik/Kconfig" +source "arch/arm/mach-nspire/Kconfig" + source "arch/arm/plat-omap/Kconfig" source "arch/arm/mach-omap1/Kconfig" @@ -996,6 +998,8 @@ source "arch/arm/mach-socfpga/Kconfig" source "arch/arm/mach-spear/Kconfig" +source "arch/arm/mach-sti/Kconfig" + source "arch/arm/mach-s3c24xx/Kconfig" if ARCH_S3C64XX diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index ab95f07e1541..77c1411c9a91 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -362,6 +362,20 @@ choice Say Y here if you want kernel low-level debugging support on NOMADIK based platforms. + config DEBUG_NSPIRE_CLASSIC_UART + bool "Kernel low-level debugging via TI-NSPIRE 8250 UART" + depends on ARCH_NSPIRE + help + Say Y here if you want kernel low-level debugging support + on TI-NSPIRE classic models. + + config DEBUG_NSPIRE_CX_UART + bool "Kernel low-level debugging via TI-NSPIRE PL011 UART" + depends on ARCH_NSPIRE + help + Say Y here if you want kernel low-level debugging support + on TI-NSPIRE CX models. + config DEBUG_OMAP2PLUS_UART bool "Kernel low-level debugging messages via OMAP2PLUS UART" depends on ARCH_OMAP2PLUS @@ -543,6 +557,16 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_STI_UART + depends on ARCH_STI + bool "Use StiH415/416 ASC for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on StiH415/416 based platforms like B2000, B2020. + It support UART2 and SBC_UART1. + + If unsure, say N. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" depends on !ARCH_MULTIPLATFORM @@ -704,6 +728,30 @@ choice endchoice +choice + prompt "Low-level debug console UART" + depends on DEBUG_LL && DEBUG_STI_UART + + config STIH41X_DEBUG_ASC2 + bool "ASC2 UART" + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2000, which has + default UART wired up to ASC2. + + If unsure, say N. + + config STIH41X_DEBUG_SBC_ASC1 + bool "SBC ASC1 UART" + help + Say Y here if you want kernel low-level debugging support + on STiH415/416 based platforms like b2020. which has + default UART wired up to SBC ASC1. + + If unsure, say N. + +endchoice + config DEBUG_LL_INCLUDE string default "debug/bcm2835.S" if DEBUG_BCM2835 @@ -726,6 +774,8 @@ config DEBUG_LL_INCLUDE DEBUG_MVEBU_UART_ALTERNATE default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART default "debug/nomadik.S" if DEBUG_NOMADIK_UART + default "debug/nspire.S" if DEBUG_NSPIRE_CX_UART || \ + DEBUG_NSPIRE_CLASSIC_UART default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ @@ -733,6 +783,7 @@ config DEBUG_LL_INCLUDE default "debug/rockchip.S" if DEBUG_ROCKCHIP_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART + default "debug/sti.S" if DEBUG_STI_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 default "debug/tegra.S" if DEBUG_TEGRA_UART default "debug/u300.S" if DEBUG_U300_UART diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c01e4a728554..72caf82a8280 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -165,6 +165,7 @@ machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik +machine-$(CONFIG_ARCH_NSPIRE) += nspire machine-$(CONFIG_ARCH_OMAP1) += omap1 machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 machine-$(CONFIG_ARCH_ORION5X) += orion5x @@ -193,6 +194,7 @@ machine-$(CONFIG_ARCH_W90X900) += w90x900 machine-$(CONFIG_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_SOCFPGA) += socfpga machine-$(CONFIG_PLAT_SPEAR) += spear +machine-$(CONFIG_ARCH_STI) += sti machine-$(CONFIG_ARCH_VIRT) += virt machine-$(CONFIG_ARCH_ZYNQ) += zynq machine-$(CONFIG_ARCH_SUNXI) += sunxi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 962c0eee3039..641b3c9a7028 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -59,6 +59,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-sd5v1.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5420-smdk5420.dtb \ exynos5440-ssdk5440.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb @@ -148,6 +149,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb +dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \ + nspire-tp.dtb \ + nspire-clp.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ @@ -197,6 +201,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ + stih416-b2000.dtb \ + stih415-b2020.dtb \ + stih416-b2020.dtb dtb-$(CONFIG_ARCH_SUNXI) += \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts index 422fdb3fcfc1..e750ab9086d5 100644 --- a/arch/arm/boot/dts/da850-enbw-cmc.dts +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -10,7 +10,7 @@ * option) any later version. */ /dts-v1/; -/include/ "da850.dtsi" +#include "da850.dtsi" / { compatible = "enbw,cmc", "ti,da850"; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index c914357c0d89..5bce7cc55cf3 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -8,7 +8,7 @@ * Free Software Foundation, version 2. */ /dts-v1/; -/include/ "da850.dtsi" +#include "da850.dtsi" / { compatible = "ti,da850-evm", "ti,da850"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 2c88313d2c7a..d70ba5504481 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -7,7 +7,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" / { arm { @@ -37,7 +37,7 @@ #size-cells = <0>; pinctrl-single,bit-per-mux; pinctrl-single,register-width = <32>; - pinctrl-single,function-mask = <0xffffffff>; + pinctrl-single,function-mask = <0xf>; status = "disabled"; nand_cs3_pins: pinmux_nand_pins { diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi new file mode 100644 index 000000000000..f65e124c04a6 --- /dev/null +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -0,0 +1,111 @@ +/* + * Samsung's Exynos5 SoC series common device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular + * SoCs from Exynos5 series can include this file and provide values for SoCs + * specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + chipid@10000000 { + compatible = "samsung,exynos4210-chipid"; + reg = <0x10000000 0x100>; + }; + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + samsung,combiner-nr = <32>; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + }; + + gic:interrupt-controller@10481000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10481000 0x1000>, + <0x10482000 0x1000>, + <0x10484000 0x2000>, + <0x10486000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + dwmmc_0: dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc_1: dwmmc1@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc_2: dwmmc2@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + serial@12C00000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C00000 0x100>; + interrupts = <0 51 0>; + }; + + serial@12C10000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C10000 0x100>; + interrupts = <0 52 0>; + }; + + serial@12C20000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C20000 0x100>; + interrupts = <0 53 0>; + }; + + serial@12C30000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x12C30000 0x100>; + interrupts = <0 54 0>; + }; + + rtc { + compatible = "samsung,s3c6410-rtc"; + reg = <0x101E0000 0x100>; + interrupts = <0 43 0>, <0 44 0>; + status = "disabled"; + }; + + watchdog { + compatible = "samsung,s3c2410-wdt"; + reg = <0x101D0000 0x100>; + interrupts = <0 42 0>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 964158c1844f..41cd625b6020 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -17,14 +17,13 @@ * published by the Free Software Foundation. */ -#include "skeleton.dtsi" +#include "exynos5.dtsi" #include "exynos5250-pinctrl.dtsi" #include <dt-bindings/clk/exynos-audss-clk.h> / { compatible = "samsung,exynos5250"; - interrupt-parent = <&gic>; aliases { spi0 = &spi_0; @@ -53,9 +52,20 @@ pinctrl3 = &pinctrl_3; }; - chipid@10000000 { - compatible = "samsung,exynos4210-chipid"; - reg = <0x10000000 0x100>; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; }; pd_gsc: gsc-power-domain@0x10044000 { @@ -80,17 +90,6 @@ #clock-cells = <1>; }; - gic:interrupt-controller@10481000 { - compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x10481000 0x1000>, - <0x10482000 0x1000>, - <0x10484000 0x2000>, - <0x10486000 0x2000>; - interrupts = <1 9 0xf04>; - }; - timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, @@ -99,22 +98,6 @@ <1 10 0xf08>; }; - combiner:interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - samsung,combiner-nr = <32>; - reg = <0x10440000 0x1000>; - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; - }; - mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; @@ -176,9 +159,6 @@ }; watchdog { - compatible = "samsung,s3c2410-wdt"; - reg = <0x101D0000 0x100>; - interrupts = <0 42 0>; clocks = <&clock 336>; clock-names = "watchdog"; }; @@ -191,12 +171,8 @@ }; rtc { - compatible = "samsung,s3c6410-rtc"; - reg = <0x101E0000 0x100>; - interrupts = <0 43 0>, <0 44 0>; clocks = <&clock 337>; clock-names = "rtc"; - status = "disabled"; }; tmu@10060000 { @@ -208,33 +184,21 @@ }; serial@12C00000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C00000 0x100>; - interrupts = <0 51 0>; clocks = <&clock 289>, <&clock 146>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C10000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C10000 0x100>; - interrupts = <0 52 0>; clocks = <&clock 290>, <&clock 147>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C20000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C20000 0x100>; - interrupts = <0 53 0>; clocks = <&clock 291>, <&clock 148>; clock-names = "uart", "clk_uart_baud0"; }; serial@12C30000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x12C30000 0x100>; - interrupts = <0 54 0>; clocks = <&clock 292>, <&clock 149>; clock-names = "uart", "clk_uart_baud0"; }; @@ -413,31 +377,19 @@ }; dwmmc_0: dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 280>, <&clock 139>; clock-names = "biu", "ciu"; }; dwmmc_1: dwmmc1@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 281>, <&clock 140>; clock-names = "biu", "ciu"; }; dwmmc_2: dwmmc2@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; clocks = <&clock 282>, <&clock 141>; clock-names = "biu", "ciu"; }; diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi new file mode 100644 index 000000000000..5848c425ae4d --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi @@ -0,0 +1,680 @@ +/* + * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@13400000 { + gpy7: gpy7 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <23 0>, <24 0>, <25 0>, <25 1>, + <26 0>, <26 1>, <27 0>, <27 1>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&combiner>; + #interrupt-cells = <2>; + interrupts = <28 0>, <28 1>, <29 0>, <29 1>, + <30 0>, <30 1>, <31 0>, <31 1>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pinctrl@13410000 { + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc2: gpc2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc3: gpc3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc4: gpc4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpc0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpc0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpc0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpc0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpc1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpc1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpc1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_int: sd1-int { + samsung,pins = "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpc1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus8: sd1-bus-width8 { + samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpc2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpc2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpc2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpc2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + }; + + pinctrl@14000000 { + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + cam_gpio_a: cam-gpio-a { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_gpio_b: cam-gpio-b { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_i2c2_bus: cam-i2c2-bus { + samsung,pins = "gpf0-4", "gpf0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + cam_spi1_bus: cam-spi1-bus { + samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_i2c1_bus: cam-i2c1-bus { + samsung,pins = "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_i2c0_bus: cam-i2c0-bus { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + cam_spi0_bus: cam-spi0-bus { + samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_bayrgb_bus: cam-bayrgb-bus { + samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3", + "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7", + "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3", + "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7", + "gpg2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@14010000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb2: gpb2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb3: gpb3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb4: gpb4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_hs_bus: i2c4-hs-bus { + samsung,pins = "gpa2-0", "gpa2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_hs_bus: i2c5-hs-bus { + samsung,pins = "gpa2-2", "gpa2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3", + "gpb0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3", + "gpb1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpb1-0", "gpb1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c6_hs_bus: i2c6-hs-bus { + samsung,pins = "gpb1-3", "gpb1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c7_hs_bus: i2c7-hs-bus { + samsung,pins = "gpb2-2", "gpb2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpb3-0", "gpb3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpb3-2", "gpb3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c8_hs_bus: i2c8-hs-bus { + samsung,pins = "gpb3-4", "gpb3-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c9_hs_bus: i2c9-hs-bus { + samsung,pins = "gpb3-6", "gpb3-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c10_hs_bus: i2c10-hs-bus { + samsung,pins = "gpb4-0", "gpb4-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts new file mode 100644 index 000000000000..08607df6a180 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -0,0 +1,33 @@ +/* + * SAMSUNG SMDK5420 board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5420.dtsi" + +/ { + model = "Samsung SMDK5420 board based on EXYNOS5420"; + compatible = "samsung,smdk5420", "samsung,exynos5420"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200 init=/linuxrc"; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi new file mode 100644 index 000000000000..8c54c4b74f0e --- /dev/null +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -0,0 +1,148 @@ +/* + * SAMSUNG EXYNOS5420 SoC device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file. + * EXYNOS5420 based board files can include this file and provide + * values for board specfic bindings. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5.dtsi" +/include/ "exynos5420-pinctrl.dtsi" +/ { + compatible = "samsung,exynos5420"; + + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + pinctrl4 = &pinctrl_4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; + clock-frequency = <1800000000>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x1>; + clock-frequency = <1800000000>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x2>; + clock-frequency = <1800000000>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x3>; + clock-frequency = <1800000000>; + }; + }; + + clock: clock-controller@0x10010000 { + compatible = "samsung,exynos5420-clock"; + reg = <0x10010000 0x30000>; + #clock-cells = <1>; + }; + + mct@101C0000 { + compatible = "samsung,exynos4210-mct"; + reg = <0x101C0000 0x800>; + interrupt-controller; + #interrups-cells = <1>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; + clocks = <&clock 1>, <&clock 315>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &combiner 23 3>, + <1 &combiner 23 4>, + <2 &combiner 25 2>, + <3 &combiner 25 3>, + <4 &gic 0 120 0>, + <5 &gic 0 121 0>, + <6 &gic 0 122 0>, + <7 &gic 0 123 0>; + }; + }; + + pinctrl_0: pinctrl@13400000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13400000 0x1000>; + interrupts = <0 45 0>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_1: pinctrl@13410000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x13410000 0x1000>; + interrupts = <0 78 0>; + }; + + pinctrl_2: pinctrl@14000000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14000000 0x1000>; + interrupts = <0 46 0>; + }; + + pinctrl_3: pinctrl@14010000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x14010000 0x1000>; + interrupts = <0 50 0>; + }; + + pinctrl_4: pinctrl@03860000 { + compatible = "samsung,exynos5420-pinctrl"; + reg = <0x03860000 0x1000>; + interrupts = <0 47 0>; + }; + + serial@12C00000 { + clocks = <&clock 257>, <&clock 128>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C10000 { + clocks = <&clock 258>, <&clock 129>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C20000 { + clocks = <&clock 259>, <&clock 130>; + clock-names = "uart", "clk_uart_baud0"; + }; + + serial@12C30000 { + clocks = <&clock 260>, <&clock 131>; + clock-names = "uart", "clk_uart_baud0"; + }; +}; diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi new file mode 100644 index 000000000000..9565199bce7a --- /dev/null +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -0,0 +1,74 @@ +/* + * linux/arch/arm/boot/nspire-classic.dts + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +/include/ "nspire.dtsi" + +&lcd { + lcd-type = "classic"; +}; + +&fast_timer { + /* compatible = "lsi,zevio-timer"; */ + reg = <0x90010000 0x1000>, <0x900A0010 0x8>; +}; + +&uart { + compatible = "ns16550"; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb_pclk>; + no-loopback-test; +}; + +&timer0 { + /* compatible = "lsi,zevio-timer"; */ + reg = <0x900C0000 0x1000>, <0x900A0018 0x8>; +}; + +&timer1 { + compatible = "lsi,zevio-timer"; + reg = <0x900D0000 0x1000>, <0x900A0020 0x8>; +}; + +&keypad { + active-low; + +}; + +&base_clk { + compatible = "lsi,nspire-classic-clock"; +}; + +&ahb_clk { + compatible = "lsi,nspire-classic-ahb-divider"; +}; + +/ { + memory { + device_type = "memory"; + reg = <0x10000000 0x2000000>; /* 32 MB */ + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + + intc: interrupt-controller@DC000000 { + compatible = "lsi,zevio-intc"; + interrupt-controller; + reg = <0xDC000000 0x1000>; + #interrupt-cells = <1>; + }; + }; + chosen { + bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0"; + }; +}; diff --git a/arch/arm/boot/dts/nspire-clp.dts b/arch/arm/boot/dts/nspire-clp.dts new file mode 100644 index 000000000000..fa5a044656de --- /dev/null +++ b/arch/arm/boot/dts/nspire-clp.dts @@ -0,0 +1,45 @@ +/* + * linux/arch/arm/boot/nspire-clp.dts + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +/dts-v1/; + +/include/ "nspire-classic.dtsi" + +&keypad { + linux,keymap = < + 0x0000001c 0x0001001c 0x00020039 + 0x0004002c 0x00050034 0x00060015 + 0x0007000b 0x0008002d 0x01000033 + 0x0101004e 0x01020011 0x01030004 + 0x0104002f 0x01050003 0x01060016 + 0x01070002 0x01080014 0x02000062 + 0x0201000c 0x0202001f 0x02030007 + 0x02040013 0x02050006 0x02060010 + 0x02070005 0x02080019 0x03000027 + 0x03010037 0x03020018 0x0303000a + 0x03040031 0x03050009 0x03060032 + 0x03070008 0x03080026 0x04000028 + 0x04010035 0x04020025 0x04040024 + 0x04060017 0x04080023 0x05000028 + 0x05020022 0x0503001b 0x05040021 + 0x0505001a 0x05060012 0x0507006f + 0x05080020 0x0509002a 0x0601001c + 0x0602002e 0x06030068 0x06040030 + 0x0605006d 0x0606001e 0x06070001 + 0x0608002b 0x0609000f 0x07000067 + 0x0702006a 0x0704006c 0x07060069 + 0x0707000e 0x0708001d 0x070a000d + >; +}; + +/ { + model = "TI-NSPIRE Clickpad"; + compatible = "ti,nspire-clp"; +}; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts new file mode 100644 index 000000000000..375b924f60d8 --- /dev/null +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -0,0 +1,112 @@ +/* + * linux/arch/arm/boot/nspire-cx.dts + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +/dts-v1/; + +/include/ "nspire.dtsi" + +&lcd { + lcd-type = "cx"; +}; + +&fast_timer { + /* compatible = "arm,sp804", "arm,primecell"; */ +}; + +&uart { + compatible = "arm,pl011", "arm,primecell"; + + clocks = <&uart_clk>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; +}; + +&timer0 { + compatible = "arm,sp804", "arm,primecell"; +}; + +&timer1 { + compatible = "arm,sp804", "arm,primecell"; +}; + +&base_clk { + compatible = "lsi,nspire-cx-clock"; +}; + +&ahb_clk { + compatible = "lsi,nspire-cx-ahb-divider"; +}; + +&keypad { + linux,keymap = < + 0x0000001c 0x0001001c 0x00040039 + 0x0005002c 0x00060015 0x0007000b + 0x0008000f 0x0100002d 0x01010011 + 0x0102002f 0x01030004 0x01040016 + 0x01050014 0x0106001f 0x01070002 + 0x010a006a 0x02000013 0x02010010 + 0x02020019 0x02030007 0x02040018 + 0x02050031 0x02060032 0x02070005 + 0x02080028 0x0209006c 0x03000026 + 0x03010025 0x03020024 0x0303000a + 0x03040017 0x03050023 0x03060022 + 0x03070008 0x03080035 0x03090069 + 0x04000021 0x04010012 0x04020020 + 0x0404002e 0x04050030 0x0406001e + 0x0407000d 0x04080037 0x04090067 + 0x05010038 0x0502000c 0x0503001b + 0x05040034 0x0505001a 0x05060006 + 0x05080027 0x0509000e 0x050a006f + 0x0600002b 0x0602004e 0x06030068 + 0x06040003 0x0605006d 0x06060009 + 0x06070001 0x0609000f 0x0708002a + 0x0709001d 0x070a0033 >; +}; + +/ { + model = "TI-NSPIRE CX"; + compatible = "ti,nspire-cx"; + + memory { + device_type = "memory"; + reg = <0x10000000 0x4000000>; /* 64 MB */ + }; + + uart_clk: uart_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <12000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + + intc: interrupt-controller@DC000000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xDC000000 0x1000>; + #interrupt-cells = <1>; + }; + + apb@90000000 { + #address-cells = <1>; + #size-cells = <1>; + + i2c@90050000 { + compatible = "snps,designware-i2c"; + reg = <0x90050000 0x1000>; + interrupts = <20>; + }; + }; + }; + chosen { + bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0"; + }; +}; diff --git a/arch/arm/boot/dts/nspire-tp.dts b/arch/arm/boot/dts/nspire-tp.dts new file mode 100644 index 000000000000..621391ce6ed6 --- /dev/null +++ b/arch/arm/boot/dts/nspire-tp.dts @@ -0,0 +1,44 @@ +/* + * linux/arch/arm/boot/nspire-tp.dts + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +/dts-v1/; + +/include/ "nspire-classic.dtsi" + +&keypad { + linux,keymap = < + 0x0000001c 0x0001001c 0x00040039 + 0x0005002c 0x00060015 0x0007000b + 0x0008000f 0x0100002d 0x01010011 + 0x0102002f 0x01030004 0x01040016 + 0x01050014 0x0106001f 0x01070002 + 0x010a006a 0x02000013 0x02010010 + 0x02020019 0x02030007 0x02040018 + 0x02050031 0x02060032 0x02070005 + 0x02080028 0x0209006c 0x03000026 + 0x03010025 0x03020024 0x0303000a + 0x03040017 0x03050023 0x03060022 + 0x03070008 0x03080035 0x03090069 + 0x04000021 0x04010012 0x04020020 + 0x0404002e 0x04050030 0x0406001e + 0x0407000d 0x04080037 0x04090067 + 0x05010038 0x0502000c 0x0503001b + 0x05040034 0x0505001a 0x05060006 + 0x05080027 0x0509000e 0x050a006f + 0x0600002b 0x0602004e 0x06030068 + 0x06040003 0x0605006d 0x06060009 + 0x06070001 0x0609000f 0x0708002a + 0x0709001d 0x070a0033 >; +}; + +/ { + model = "TI-NSPIRE Touchpad"; + compatible = "ti,nspire-tp"; +}; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi new file mode 100644 index 000000000000..a22ffe633b49 --- /dev/null +++ b/arch/arm/boot/dts/nspire.dtsi @@ -0,0 +1,175 @@ +/* + * linux/arch/arm/boot/nspire.dtsi + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&intc>; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + bootrom: bootrom@00000000 { + reg = <0x00000000 0x80000>; + }; + + sram: sram@A4000000 { + device = "memory"; + reg = <0xA4000000 0x20000>; + }; + + timer_clk: timer_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; + + base_clk: base_clk { + #clock-cells = <0>; + reg = <0x900B0024 0x4>; + }; + + ahb_clk: ahb_clk { + #clock-cells = <0>; + reg = <0x900B0024 0x4>; + clocks = <&base_clk>; + }; + + apb_pclk: apb_pclk { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <2>; + clock-mult = <1>; + clocks = <&ahb_clk>; + }; + + ahb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + spi: spi@A9000000 { + reg = <0xA9000000 0x1000>; + }; + + usb0: usb@B0000000 { + reg = <0xB0000000 0x1000>; + interrupts = <8>; + }; + + usb1: usb@B4000000 { + reg = <0xB4000000 0x1000>; + interrupts = <9>; + status = "disabled"; + }; + + lcd: lcd@C0000000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0xC0000000 0x1000>; + interrupts = <21>; + + clocks = <&apb_pclk>; + clock-names = "apb_pclk"; + }; + + adc: adc@C4000000 { + reg = <0xC4000000 0x1000>; + interrupts = <11>; + }; + + tdes: crypto@C8010000 { + reg = <0xC8010000 0x1000>; + }; + + sha256: crypto@CC000000 { + reg = <0xCC000000 0x1000>; + }; + + apb@90000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + clock-ranges; + ranges; + + gpio: gpio@90000000 { + reg = <0x90000000 0x1000>; + interrupts = <7>; + }; + + fast_timer: timer@90010000 { + reg = <0x90010000 0x1000>; + interrupts = <17>; + }; + + uart: serial@90020000 { + reg = <0x90020000 0x1000>; + interrupts = <1>; + }; + + timer0: timer@900C0000 { + reg = <0x900C0000 0x1000>; + + clocks = <&timer_clk>; + }; + + timer1: timer@900D0000 { + reg = <0x900D0000 0x1000>; + interrupts = <19>; + + clocks = <&timer_clk>; + }; + + watchdog: watchdog@90060000 { + compatible = "arm,amba-primecell"; + reg = <0x90060000 0x1000>; + interrupts = <3>; + }; + + rtc: rtc@90090000 { + reg = <0x90090000 0x1000>; + interrupts = <4>; + }; + + misc: misc@900A0000 { + reg = <0x900A0000 0x1000>; + }; + + pwr: pwr@900B0000 { + reg = <0x900B0000 0x1000>; + interrupts = <15>; + }; + + keypad: input@900E0000 { + compatible = "ti,nspire-keypad"; + reg = <0x900E0000 0x1000>; + interrupts = <16>; + + scan-interval = <1000>; + row-delay = <200>; + + clocks = <&apb_pclk>; + }; + + contrast: contrast@900F0000 { + reg = <0x900F0000 0x1000>; + }; + + led: led@90110000 { + reg = <0x90110000 0x1000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st-pincfg.h new file mode 100644 index 000000000000..8c45d85ac13e --- /dev/null +++ b/arch/arm/boot/dts/st-pincfg.h @@ -0,0 +1,71 @@ +#ifndef _ST_PINCFG_H_ +#define _ST_PINCFG_H_ + +/* Alternate functions */ +#define ALT1 1 +#define ALT2 2 +#define ALT3 3 +#define ALT4 4 +#define ALT5 5 +#define ALT6 6 +#define ALT7 7 + +/* Output enable */ +#define OE (1 << 27) +/* Pull Up */ +#define PU (1 << 26) +/* Open Drain */ +#define OD (1 << 26) +#define RT (1 << 23) +#define INVERTCLK (1 << 22) +#define CLKNOTDATA (1 << 21) +#define DOUBLE_EDGE (1 << 20) +#define CLK_A (0 << 18) +#define CLK_B (1 << 18) +#define CLK_C (2 << 18) +#define CLK_D (3 << 18) + +/* User-frendly defines for Pin Direction */ + /* oe = 0, pu = 0, od = 0 */ +#define IN (0) + /* oe = 0, pu = 1, od = 0 */ +#define IN_PU (PU) + /* oe = 1, pu = 0, od = 0 */ +#define OUT (OE) + /* oe = 1, pu = 0, od = 1 */ +#define BIDIR (OE | OD) + /* oe = 1, pu = 1, od = 1 */ +#define BIDIR_PU (OE | PU | OD) + +/* RETIME_TYPE */ +/* + * B Mode + * Bypass retime with optional delay parameter + */ +#define BYPASS (0) +/* + * R0, R1, R0D, R1D modes + * single-edge data non inverted clock, retime data with clk + */ +#define SE_NICLK_IO (RT) +/* + * RIV0, RIV1, RIV0D, RIV1D modes + * single-edge data inverted clock, retime data with clk + */ +#define SE_ICLK_IO (RT | INVERTCLK) +/* + * R0E, R1E, R0ED, R1ED modes + * double-edge data, retime data with clk + */ +#define DE_IO (RT | DOUBLE_EDGE) +/* + * CIV0, CIV1 modes with inverted clock + * Retiming the clk pins will park clock & reduce the noise within the core. + */ +#define ICLK (RT | CLKNOTDATA | INVERTCLK) +/* + * CLK0, CLK1 modes with non-inverted clock + * Retiming the clk pins will park clock & reduce the noise within the core. + */ +#define NICLK (RT | CLKNOTDATA) +#endif /* _ST_PINCFG_H_ */ diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts new file mode 100644 index 000000000000..d4af53160435 --- /dev/null +++ b/arch/arm/boot/dts/stih415-b2000.dts @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih415.dtsi" +#include "stih41x-b2000.dtsi" +/ { + model = "STiH415 B2000 Board"; + compatible = "st,stih415", "st,stih415-b2000"; +}; diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts new file mode 100644 index 000000000000..442b019e9a3a --- /dev/null +++ b/arch/arm/boot/dts/stih415-b2020.dts @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih415.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH415 B2020 Board"; + compatible = "st,stih415", "st,stih415-b2020"; +}; diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi new file mode 100644 index 000000000000..174c799df741 --- /dev/null +++ b/arch/arm/boot/dts/stih415-clock.dtsi @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + clocks { + /* + * Fixed 30MHz oscillator input to SoC + */ + CLK_SYSIN: CLK_SYSIN { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: arm_periph_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <500000000>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + CLKS_ICN_REG_0: CLKS_ICN_REG_0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi new file mode 100644 index 000000000000..1d322b24d1e4 --- /dev/null +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -0,0 +1,268 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +/ { + + aliases { + gpio0 = &PIO0; + gpio1 = &PIO1; + gpio2 = &PIO2; + gpio3 = &PIO3; + gpio4 = &PIO4; + gpio5 = &PIO5; + gpio6 = &PIO6; + gpio7 = &PIO7; + gpio8 = &PIO8; + gpio9 = &PIO9; + gpio10 = &PIO10; + gpio11 = &PIO11; + gpio12 = &PIO12; + gpio13 = &PIO13; + gpio14 = &PIO14; + gpio15 = &PIO15; + gpio16 = &PIO16; + gpio17 = &PIO17; + gpio18 = &PIO18; + gpio19 = &PIO100; + gpio20 = &PIO101; + gpio21 = &PIO102; + gpio22 = &PIO103; + gpio23 = &PIO104; + gpio24 = &PIO105; + gpio25 = &PIO106; + gpio26 = &PIO107; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + ranges = <0 0xfe610000 0x5000>; + + PIO0: gpio@fe610000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO0"; + }; + PIO1: gpio@fe611000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + PIO2: gpio@fe612000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + PIO3: gpio@fe613000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + PIO4: gpio@fe614000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + + sbc_serial1 { + pinctrl_sbc_serial1:sbc_serial1 { + st,pins { + tx = <&PIO2 6 ALT3 OUT>; + rx = <&PIO2 7 ALT3 IN>; + }; + }; + }; + }; + + pin-controller-front { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-front-pinctrl"; + st,syscfg = <&syscfg_front>; + ranges = <0 0xfee00000 0x8000>; + + PIO5: gpio@fee00000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO5"; + }; + PIO6: gpio@fee01000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO6"; + }; + PIO7: gpio@fee02000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO7"; + }; + PIO8: gpio@fee03000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO8"; + }; + PIO9: gpio@fee04000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO9"; + }; + PIO10: gpio@fee05000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x5000 0x100>; + st,bank-name = "PIO10"; + }; + PIO11: gpio@fee06000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x6000 0x100>; + st,bank-name = "PIO11"; + }; + PIO12: gpio@fee07000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x7000 0x100>; + st,bank-name = "PIO12"; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + ranges = <0 0xfe820000 0x8000>; + + PIO13: gpio@fe820000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO13"; + }; + PIO14: gpio@fe821000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO14"; + }; + PIO15: gpio@fe822000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO15"; + }; + PIO16: gpio@fe823000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO16"; + }; + PIO17: gpio@fe824000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO17"; + }; + PIO18: gpio@fe825000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x5000 0x100>; + st,bank-name = "PIO18"; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&PIO17 4 ALT2 OUT>; + rx = <&PIO17 5 ALT2 IN>; + }; + }; + }; + }; + + pin-controller-left { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-left-pinctrl"; + st,syscfg = <&syscfg_left>; + ranges = <0 0xfd6b0000 0x3000>; + + PIO100: gpio@fd6b0000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO100"; + }; + PIO101: gpio@fd6b1000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO101"; + }; + PIO102: gpio@fd6b2000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO102"; + }; + }; + + pin-controller-right { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih415-right-pinctrl"; + st,syscfg = <&syscfg_right>; + ranges = <0 0xfd330000 0x5000>; + + PIO103: gpio@fd330000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO103"; + }; + PIO104: gpio@fd331000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO104"; + }; + PIO105: gpio@fd332000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO105"; + }; + PIO106: gpio@fd333000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO106"; + }; + PIO107: gpio@fd334000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO107"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi new file mode 100644 index 000000000000..74ab8ded4b49 --- /dev/null +++ b/arch/arm/boot/dts/stih415.dtsi @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih41x.dtsi" +#include "stih415-clock.dtsi" +#include "stih415-pinctrl.dtsi" +/ { + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfffe2000 0x1000>; + arm,data-latency = <3 2 2>; + arm,tag-latency = <1 1 1>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + syscfg_sbc: sbc-syscfg@fe600000{ + compatible = "st,stih415-sbc-syscfg", "syscon"; + reg = <0xfe600000 0xb4>; + }; + + syscfg_front: front-syscfg@fee10000{ + compatible = "st,stih415-front-syscfg", "syscon"; + reg = <0xfee10000 0x194>; + }; + + syscfg_rear: rear-syscfg@fe830000{ + compatible = "st,stih415-rear-syscfg", "syscon"; + reg = <0xfe830000 0x190>; + }; + + /* MPE syscfgs */ + syscfg_left: left-syscfg@fd690000{ + compatible = "st,stih415-left-syscfg", "syscon"; + reg = <0xfd690000 0x78>; + }; + + syscfg_right: right-syscfg@fd320000{ + compatible = "st,stih415-right-syscfg", "syscon"; + reg = <0xfd320000 0x180>; + }; + + syscfg_system: system-syscfg@fdde0000 { + compatible = "st,stih415-system-syscfg", "syscon"; + reg = <0xfdde0000 0x15c>; + }; + + syscfg_lpm: lpm-syscfg@fe4b5100{ + compatible = "st,stih415-lpm-syscfg", "syscon"; + reg = <0xfe4b5100 0x08>; + }; + + serial2: serial@fed32000 { + compatible = "st,asc"; + status = "disabled"; + reg = <0xfed32000 0x2c>; + interrupts = <0 197 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + clocks = <&CLKS_ICN_REG_0>; + }; + + /* SBC comms block ASCs in SASG1 */ + sbc_serial1: serial@fe531000 { + compatible = "st,asc"; + status = "disabled"; + reg = <0xfe531000 0x2c>; + interrupts = <0 210 0>; + clocks = <&CLK_SYSIN>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts new file mode 100644 index 000000000000..a5eb6eee10bf --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2000.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2000.dtsi" + +/ { + compatible = "st,stih416", "st,stih416-b2000"; + model = "STiH416 B2000"; +}; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts new file mode 100644 index 000000000000..276f28da573a --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH416 B2020"; + compatible = "st,stih416", "st,stih416-b2020"; + +}; diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi new file mode 100644 index 000000000000..7026bf1158d8 --- /dev/null +++ b/arch/arm/boot/dts/stih416-clock.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2013 STMicroelectronics R&D Limited + * <stlinux-devel@stlinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + clocks { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + CLK_SYSIN: CLK_SYSIN { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + clock-output-names = "CLK_SYSIN"; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: arm_periph_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + CLK_S_ICN_REG_0: clockgenA0@4 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + clock-output-names = "CLK_S_ICN_REG_0"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi new file mode 100644 index 000000000000..957b21a71b4b --- /dev/null +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -0,0 +1,295 @@ + +/* + * Copyright (C) 2013 STMicroelectronics Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +/ { + + aliases { + gpio0 = &PIO0; + gpio1 = &PIO1; + gpio2 = &PIO2; + gpio3 = &PIO3; + gpio4 = &PIO4; + gpio5 = &PIO40; + gpio6 = &PIO5; + gpio7 = &PIO6; + gpio8 = &PIO7; + gpio9 = &PIO8; + gpio10 = &PIO9; + gpio11 = &PIO10; + gpio12 = &PIO11; + gpio13 = &PIO12; + gpio14 = &PIO30; + gpio15 = &PIO31; + gpio16 = &PIO13; + gpio17 = &PIO14; + gpio18 = &PIO15; + gpio19 = &PIO16; + gpio20 = &PIO17; + gpio21 = &PIO18; + gpio22 = &PIO100; + gpio23 = &PIO101; + gpio24 = &PIO102; + gpio25 = &PIO103; + gpio26 = &PIO104; + gpio27 = &PIO105; + gpio28 = &PIO106; + gpio29 = &PIO107; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih416-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + ranges = <0 0xfe610000 0x6000>; + + PIO0: gpio@fe610000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO0"; + }; + PIO1: gpio@fe611000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + PIO2: gpio@fe612000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + PIO3: gpio@fe613000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + PIO4: gpio@fe614000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + PIO40: gpio@fe615000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x5000 0x100>; + st,bank-name = "PIO40"; + st,retime-pin-mask = <0x7f>; + }; + + sbc_serial1 { + pinctrl_sbc_serial1: sbc_serial1 { + st,pins { + tx = <&PIO2 6 ALT3 OUT>; + rx = <&PIO2 7 ALT3 IN>; + }; + }; + }; + }; + + pin-controller-front { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih416-front-pinctrl"; + st,syscfg = <&syscfg_front>; + ranges = <0 0xfee00000 0x10000>; + + PIO5: gpio@fee00000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO5"; + }; + PIO6: gpio@fee01000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO6"; + }; + PIO7: gpio@fee02000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO7"; + }; + PIO8: gpio@fee03000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO8"; + }; + PIO9: gpio@fee04000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO9"; + }; + PIO10: gpio@fee05000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x5000 0x100>; + st,bank-name = "PIO10"; + }; + PIO11: gpio@fee06000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x6000 0x100>; + st,bank-name = "PIO11"; + }; + PIO12: gpio@fee07000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x7000 0x100>; + st,bank-name = "PIO12"; + }; + PIO30: gpio@fee08000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x8000 0x100>; + st,bank-name = "PIO30"; + }; + PIO31: gpio@fee09000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x9000 0x100>; + st,bank-name = "PIO31"; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih416-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + ranges = <0 0xfe820000 0x6000>; + + PIO13: gpio@fe820000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO13"; + }; + PIO14: gpio@fe821000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO14"; + }; + PIO15: gpio@fe822000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO15"; + }; + PIO16: gpio@fe823000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO16"; + }; + PIO17: gpio@fe824000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO17"; + }; + PIO18: gpio@fe825000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x5000 0x100>; + st,bank-name = "PIO18"; + st,retime-pin-mask = <0xf>; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&PIO17 4 ALT2 OUT>; + rx = <&PIO17 5 ALT2 IN>; + output-enable = <&PIO11 3 ALT2 OUT>; + }; + }; + }; + }; + + pin-controller-fvdp-fe { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih416-fvdp-fe-pinctrl"; + st,syscfg = <&syscfg_fvdp_fe>; + ranges = <0 0xfd6b0000 0x3000>; + + PIO100: gpio@fd6b0000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO100"; + }; + PIO101: gpio@fd6b1000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO101"; + }; + PIO102: gpio@fd6b2000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO102"; + }; + }; + + pin-controller-fvdp-lite { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih416-fvdp-lite-pinctrl"; + st,syscfg = <&syscfg_fvdp_lite>; + ranges = <0 0xfd330000 0x5000>; + + PIO103: gpio@fd330000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0 0x100>; + st,bank-name = "PIO103"; + }; + PIO104: gpio@fd331000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x1000 0x100>; + st,bank-name = "PIO104"; + }; + PIO105: gpio@fd332000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x2000 0x100>; + st,bank-name = "PIO105"; + }; + PIO106: gpio@fd333000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x3000 0x100>; + st,bank-name = "PIO106"; + }; + + PIO107: gpio@fd334000 { + gpio-controller; + #gpio-cells = <1>; + reg = <0x4000 0x100>; + st,bank-name = "PIO107"; + st,retime-pin-mask = <0xf>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi new file mode 100644 index 000000000000..3cecd9689a49 --- /dev/null +++ b/arch/arm/boot/dts/stih416.dtsi @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 STMicroelectronics Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih41x.dtsi" +#include "stih416-clock.dtsi" +#include "stih416-pinctrl.dtsi" +/ { + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xfffe2000 0x1000>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + syscfg_sbc:sbc-syscfg@fe600000{ + compatible = "st,stih416-sbc-syscfg", "syscon"; + reg = <0xfe600000 0x1000>; + }; + + syscfg_front:front-syscfg@fee10000{ + compatible = "st,stih416-front-syscfg", "syscon"; + reg = <0xfee10000 0x1000>; + }; + + syscfg_rear:rear-syscfg@fe830000{ + compatible = "st,stih416-rear-syscfg", "syscon"; + reg = <0xfe830000 0x1000>; + }; + + /* MPE */ + syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{ + compatible = "st,stih416-fvdp-fe-syscfg", "syscon"; + reg = <0xfddf0000 0x1000>; + }; + + syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{ + compatible = "st,stih416-fvdp-lite-syscfg", "syscon"; + reg = <0xfd6a0000 0x1000>; + }; + + syscfg_cpu:cpu-syscfg@fdde0000{ + compatible = "st,stih416-cpu-syscfg", "syscon"; + reg = <0xfdde0000 0x1000>; + }; + + syscfg_compo:compo-syscfg@fd320000{ + compatible = "st,stih416-compo-syscfg", "syscon"; + reg = <0xfd320000 0x1000>; + }; + + syscfg_transport:transport-syscfg@fd690000{ + compatible = "st,stih416-transport-syscfg", "syscon"; + reg = <0xfd690000 0x1000>; + }; + + syscfg_lpm:lpm-syscfg@fe4b5100{ + compatible = "st,stih416-lpm-syscfg", "syscon"; + reg = <0xfe4b5100 0x8>; + }; + + serial2: serial@fed32000{ + compatible = "st,asc"; + status = "disabled"; + reg = <0xfed32000 0x2c>; + interrupts = <0 197 0>; + clocks = <&CLK_S_ICN_REG_0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + }; + + /* SBC_UART1 */ + sbc_serial1: serial@fe531000 { + compatible = "st,asc"; + status = "disabled"; + reg = <0xfe531000 0x2c>; + interrupts = <0 210 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + clocks = <&CLK_SYSIN>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi new file mode 100644 index 000000000000..8e694d2b8f5b --- /dev/null +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/ { + + memory{ + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &serial2; + }; + + aliases { + ttyAS0 = &serial2; + }; + + soc { + serial2: serial@fed32000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + fp_led { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO105 7>; + linux,default-trigger = "heartbeat"; + }; + }; + + }; +}; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi new file mode 100644 index 000000000000..133e18143b1b --- /dev/null +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/ { + memory{ + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &sbc_serial1; + }; + + aliases { + ttyAS0 = &sbc_serial1; + }; + soc { + sbc_serial1: serial@fe531000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO4 7>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi new file mode 100644 index 000000000000..7321403cab8a --- /dev/null +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -0,0 +1,38 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + intc: interrupt-controller@fffe1000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfffe1000 0x1000>, + <0xfffe0100 0x100>; + }; + + scu@fffe0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfffe0000 0x1000>; + }; + + timer@fffe0200 { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-global-timer"; + reg = <0xfffe0200 0x100>; + interrupts = <1 11 0x04>; + clocks = <&arm_periph_clk>; + }; +}; diff --git a/arch/arm/include/debug/nspire.S b/arch/arm/include/debug/nspire.S new file mode 100644 index 000000000000..886fd276fcbc --- /dev/null +++ b/arch/arm/include/debug/nspire.S @@ -0,0 +1,28 @@ +/* + * linux/arch/arm/include/debug/nspire.S + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#define NSPIRE_EARLY_UART_PHYS_BASE 0x90020000 +#define NSPIRE_EARLY_UART_VIRT_BASE 0xfee20000 + +.macro addruart, rp, rv, tmp + ldr \rp, =(NSPIRE_EARLY_UART_PHYS_BASE) @ physical base address + ldr \rv, =(NSPIRE_EARLY_UART_VIRT_BASE) @ virtual base address +.endm + + +#ifdef CONFIG_DEBUG_NSPIRE_CX_UART +#include <asm/hardware/debug-pl01x.S> +#endif + +#ifdef CONFIG_DEBUG_NSPIRE_CLASSIC_UART +#define UART_SHIFT 2 +#include <asm/hardware/debug-8250.S> +#endif diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S new file mode 100644 index 000000000000..e3aa58ff1776 --- /dev/null +++ b/arch/arm/include/debug/sti.S @@ -0,0 +1,61 @@ +/* + * arch/arm/include/debug/sti.S + * + * Debugging macro include header + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define STIH41X_COMMS_BASE 0xfed00000 +#define STIH41X_ASC2_BASE (STIH41X_COMMS_BASE+0x32000) + +#define STIH41X_SBC_LPM_BASE 0xfe400000 +#define STIH41X_SBC_COMMS_BASE (STIH41X_SBC_LPM_BASE + 0x100000) +#define STIH41X_SBC_ASC1_BASE (STIH41X_SBC_COMMS_BASE + 0x31000) + + +#define VIRT_ADDRESS(x) (x - 0x1000000) + +#if IS_ENABLED(CONFIG_STIH41X_DEBUG_ASC2) +#define DEBUG_LL_UART_BASE STIH41X_ASC2_BASE +#endif + +#if IS_ENABLED(CONFIG_STIH41X_DEBUG_SBC_ASC1) +#define DEBUG_LL_UART_BASE STIH41X_SBC_ASC1_BASE +#endif + +#ifndef DEBUG_LL_UART_BASE +#error "DEBUG UART is not Configured" +#endif + +#define ASC_TX_BUF_OFF 0x04 +#define ASC_CTRL_OFF 0x0c +#define ASC_STA_OFF 0x14 + +#define ASC_STA_TX_FULL (1<<9) +#define ASC_STA_TX_EMPTY (1<<1) + + + .macro addruart, rp, rv, tmp + ldr \rp, =DEBUG_LL_UART_BASE @ physical base + ldr \rv, =VIRT_ADDRESS(DEBUG_LL_UART_BASE) @ virt base + .endm + + .macro senduart,rd,rx + strb \rd, [\rx, #ASC_TX_BUF_OFF] + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #ASC_STA_OFF] + tst \rd, #ASC_STA_TX_FULL + bne 1001b + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #ASC_STA_OFF] + tst \rd, #ASC_STA_TX_EMPTY + beq 1001b + .endm diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0ecd5af20545..2d503b3684c4 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -78,6 +78,16 @@ config SOC_EXYNOS5250 help Enable EXYNOS5250 SoC support +config SOC_EXYNOS5420 + bool "SAMSUNG EXYNOS5420" + default y + depends on ARCH_EXYNOS5 + select PM_GENERIC_DOMAINS if PM + select S5P_PM if PM + select S5P_SLEEP if PM + help + Enable EXYNOS5420 SoC support + config SOC_EXYNOS5440 bool "SAMSUNG EXYNOS5440" default y diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 81e6320ca091..2c655db4b78e 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -53,6 +53,7 @@ static const char name_exynos4210[] = "EXYNOS4210"; static const char name_exynos4212[] = "EXYNOS4212"; static const char name_exynos4412[] = "EXYNOS4412"; static const char name_exynos5250[] = "EXYNOS5250"; +static const char name_exynos5420[] = "EXYNOS5420"; static const char name_exynos5440[] = "EXYNOS5440"; static void exynos4_map_io(void); @@ -86,6 +87,12 @@ static struct cpu_table cpu_ids[] __initdata = { .init = exynos_init, .name = name_exynos5250, }, { + .idcode = EXYNOS5420_SOC_ID, + .idmask = EXYNOS5_SOC_MASK, + .map_io = exynos5_map_io, + .init = exynos_init, + .name = name_exynos5420, + }, { .idcode = EXYNOS5440_SOC_ID, .idmask = EXYNOS5_SOC_MASK, .map_io = exynos5440_map_io, @@ -289,10 +296,10 @@ void exynos5_restart(char mode, const char *cmd) u32 val; void __iomem *addr; - if (of_machine_is_compatible("samsung,exynos5250")) { - val = 0x1; - addr = EXYNOS_SWRESET; - } else if (of_machine_is_compatible("samsung,exynos5440")) { + val = 0x1; + addr = EXYNOS_SWRESET; + + if (of_machine_is_compatible("samsung,exynos5440")) { u32 status; np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock"); @@ -303,9 +310,6 @@ void exynos5_restart(char mode, const char *cmd) val = __raw_readl(addr); val = (val & 0xffff0000) | (status & 0xffff); - } else { - pr_err("%s: cannot support non-DT\n", __func__); - return; } __raw_writel(val, addr); diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h index d405762be183..5d7ce36be46f 100644 --- a/arch/arm/mach-exynos/include/mach/uncompress.h +++ b/arch/arm/mach-exynos/include/mach/uncompress.h @@ -28,13 +28,12 @@ static void arch_detect_cpu(void) /* * product_id is bits 31:12 - * bits 23:20 describe the exynosX family - * + * bits 23:20 describe the exynosX family + * bits 27:24 describe the exynosX family in exynos5420 */ chip_id >>= 20; - chip_id &= 0xf; - if (chip_id == 0x5) + if ((chip_id & 0x0f) == 0x5 || (chip_id & 0xf0) == 0x50) uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); else uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT); diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index d5c8afdeaa39..f874b773ca13 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -52,6 +52,7 @@ static void __init exynos5_dt_machine_init(void) static char const *exynos5_dt_compat[] __initdata = { "samsung,exynos5250", + "samsung,exynos5420", "samsung,exynos5440", NULL }; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index d9c6d0ab6a0c..deba1308ff16 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -50,6 +50,8 @@ static inline void __iomem *cpu_boot_reg(int cpu) boot_reg = cpu_boot_reg_base(); if (soc_is_exynos4412()) boot_reg += 4*cpu; + else if (soc_is_exynos5420()) + boot_reg += 4; return boot_reg; } @@ -180,10 +182,14 @@ static void __init exynos_smp_init_cpus(void) void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; - if (soc_is_exynos5250()) - ncores = 2; - else + if (read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9) ncores = scu_base ? scu_get_core_count(scu_base) : 1; + else + /* + * CPU Nodes are passed thru DT and set_cpu_possible + * is set by "arm_dt_init_cpu_maps". + */ + return; /* sanity check */ if (ncores > nr_cpu_ids) { diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 1a26d04c9400..d257ff40e16b 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,16 +1,18 @@ obj-y += io.o timer.o obj-y += clock.o -obj-$(CONFIG_DEBUG_FS) += clock-debug.o obj-$(CONFIG_MSM_VIC) += irq-vic.o obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o -obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o -obj-$(CONFIG_ARCH_MSM7X30) += dma.o -obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o +obj-$(CONFIG_ARCH_MSM7X00A) += irq.o +obj-$(CONFIG_ARCH_QSD8X50) += sirc.o obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o +obj-$(CONFIG_ARCH_MSM7X00A) += dma.o +obj-$(CONFIG_ARCH_MSM7X30) += dma.o +obj-$(CONFIG_ARCH_QSD8X50) += dma.o + obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o obj-$(CONFIG_MSM_SMD) += last_radio_log.o obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 82eaf88d2026..803651ad4f62 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -59,6 +59,7 @@ static struct platform_device smc91x_device = { }; static struct platform_device *devices[] __initdata = { + &msm_clock_7x01a, &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, @@ -91,7 +92,6 @@ static void __init halibut_fixup(struct tag *tags, char **cmdline, static void __init halibut_map_io(void) { msm_map_common_io(); - msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a); } static void __init halibut_init_late(void) diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index 520c141acd03..db3d8c0bc8a4 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -89,6 +89,7 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = { }; static struct platform_device *devices[] __initdata = { + &msm_clock_7x30, &msm_device_gpio_7x30, #if defined(CONFIG_SERIAL_MSM) || defined(CONFIG_MSM_SERIAL_DEBUGGER) &msm_device_uart2, @@ -116,7 +117,6 @@ static void __init msm7x30_init(void) static void __init msm7x30_map_io(void) { msm_map_msm7x30_io(); - msm_clock_init(msm_clocks_7x30, msm_num_clocks_7x30); } static void __init msm7x30_init_late(void) diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c index 38a532d6937c..f14a73d86bc0 100644 --- a/arch/arm/mach-msm/board-qsd8x50.c +++ b/arch/arm/mach-msm/board-qsd8x50.c @@ -89,6 +89,7 @@ static struct msm_otg_platform_data msm_otg_pdata = { }; static struct platform_device *devices[] __initdata = { + &msm_clock_8x50, &msm_device_gpio_8x50, &msm_device_uart3, &msm_device_smd, @@ -172,7 +173,6 @@ static void __init qsd8x50_init_mmc(void) static void __init qsd8x50_map_io(void) { msm_map_qsd8x50_io(); - msm_clock_init(msm_clocks_8x50, msm_num_clocks_8x50); } static void __init qsd8x50_init_irq(void) diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index f9a5db6d2ced..77b0a26f897f 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -7,7 +7,6 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/leds.h> -#include <linux/clk.h> #include <linux/err.h> #include <asm/io.h> @@ -19,6 +18,7 @@ #include "board-trout.h" #include "proc_comm.h" +#include "clock-pcom.h" #include "devices.h" #define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255 @@ -170,7 +170,6 @@ static struct mddi_table mddi_toshiba_init_table[] = { #define INTMASK_VWAKEOUT (1U << 0) -static struct clk *gp_clk; static int trout_new_backlight = 1; static struct vreg *vreg_mddi_1v5; static struct vreg *vreg_lcm_2v85; @@ -273,18 +272,14 @@ int __init trout_init_panel(void) } else { uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA); + uint32_t id = P_GP_CLK; + uint32_t rate = 19200000; + msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0); - gp_clk = clk_get(NULL, "gp_clk"); - if (IS_ERR(gp_clk)) { - printk(KERN_ERR "trout_init_panel: could not get gp" - "clock\n"); - gp_clk = NULL; - } - rc = clk_set_rate(gp_clk, 19200000); - if (rc) - printk(KERN_ERR "trout_init_panel: set clock rate " - "failed\n"); + msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); + if (id < 0) + pr_err("trout_init_panel: set clock rate failed\n"); } rc = platform_device_register(&msm_device_mdp); diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 80fe1c5ff5c1..64a46eb4fc49 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -36,6 +36,7 @@ extern int trout_init_mmc(unsigned int); static struct platform_device *devices[] __initdata = { + &msm_clock_7x01a, &msm_device_gpio_7201, &msm_device_uart3, &msm_device_smd, @@ -94,8 +95,6 @@ static void __init trout_map_io(void) /* route UART3 to the "H2W" extended usb connector */ writeb(0x80, TROUT_CPLD_BASE + 0x00); #endif - - msm_clock_init(msm_clocks_7x01a, msm_num_clocks_7x01a); } static void __init trout_init_late(void) diff --git a/arch/arm/mach-msm/clock-7x30.h b/arch/arm/mach-msm/clock-7x30.h deleted file mode 100644 index 14104453688b..000000000000 --- a/arch/arm/mach-msm/clock-7x30.h +++ /dev/null @@ -1,155 +0,0 @@ -/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ARCH_ARM_MACH_MSM_CLOCK_7X30_H -#define __ARCH_ARM_MACH_MSM_CLOCK_7X30_H - -enum { - L_7X30_NONE_CLK = -1, - L_7X30_ADM_CLK, - L_7X30_I2C_CLK, - L_7X30_I2C_2_CLK, - L_7X30_QUP_I2C_CLK, - L_7X30_UART1DM_CLK, - L_7X30_UART1DM_P_CLK, - L_7X30_UART2DM_CLK, - L_7X30_UART2DM_P_CLK, - L_7X30_EMDH_CLK, - L_7X30_EMDH_P_CLK, - L_7X30_PMDH_CLK, - L_7X30_PMDH_P_CLK, - L_7X30_GRP_2D_CLK, - L_7X30_GRP_2D_P_CLK, - L_7X30_GRP_3D_SRC_CLK, - L_7X30_GRP_3D_CLK, - L_7X30_GRP_3D_P_CLK, - L_7X30_IMEM_CLK, - L_7X30_SDC1_CLK, - L_7X30_SDC1_P_CLK, - L_7X30_SDC2_CLK, - L_7X30_SDC2_P_CLK, - L_7X30_SDC3_CLK, - L_7X30_SDC3_P_CLK, - L_7X30_SDC4_CLK, - L_7X30_SDC4_P_CLK, - L_7X30_MDP_CLK, - L_7X30_MDP_P_CLK, - L_7X30_MDP_LCDC_PCLK_CLK, - L_7X30_MDP_LCDC_PAD_PCLK_CLK, - L_7X30_MDP_VSYNC_CLK, - L_7X30_MI2S_CODEC_RX_M_CLK, - L_7X30_MI2S_CODEC_RX_S_CLK, - L_7X30_MI2S_CODEC_TX_M_CLK, - L_7X30_MI2S_CODEC_TX_S_CLK, - L_7X30_MI2S_M_CLK, - L_7X30_MI2S_S_CLK, - L_7X30_LPA_CODEC_CLK, - L_7X30_LPA_CORE_CLK, - L_7X30_LPA_P_CLK, - L_7X30_MIDI_CLK, - L_7X30_MDC_CLK, - L_7X30_ROTATOR_IMEM_CLK, - L_7X30_ROTATOR_P_CLK, - L_7X30_SDAC_M_CLK, - L_7X30_SDAC_CLK, - L_7X30_UART1_CLK, - L_7X30_UART2_CLK, - L_7X30_UART3_CLK, - L_7X30_TV_CLK, - L_7X30_TV_DAC_CLK, - L_7X30_TV_ENC_CLK, - L_7X30_HDMI_CLK, - L_7X30_TSIF_REF_CLK, - L_7X30_TSIF_P_CLK, - L_7X30_USB_HS_SRC_CLK, - L_7X30_USB_HS_CLK, - L_7X30_USB_HS_CORE_CLK, - L_7X30_USB_HS_P_CLK, - L_7X30_USB_HS2_CLK, - L_7X30_USB_HS2_CORE_CLK, - L_7X30_USB_HS2_P_CLK, - L_7X30_USB_HS3_CLK, - L_7X30_USB_HS3_CORE_CLK, - L_7X30_USB_HS3_P_CLK, - L_7X30_VFE_CLK, - L_7X30_VFE_P_CLK, - L_7X30_VFE_MDC_CLK, - L_7X30_VFE_CAMIF_CLK, - L_7X30_CAMIF_PAD_P_CLK, - L_7X30_CAM_M_CLK, - L_7X30_JPEG_CLK, - L_7X30_JPEG_P_CLK, - L_7X30_VPE_CLK, - L_7X30_MFC_CLK, - L_7X30_MFC_DIV2_CLK, - L_7X30_MFC_P_CLK, - L_7X30_SPI_CLK, - L_7X30_SPI_P_CLK, - L_7X30_CSI0_CLK, - L_7X30_CSI0_VFE_CLK, - L_7X30_CSI0_P_CLK, - L_7X30_CSI1_CLK, - L_7X30_CSI1_VFE_CLK, - L_7X30_CSI1_P_CLK, - L_7X30_GLBL_ROOT_CLK, - - L_7X30_AXI_LI_VG_CLK, - L_7X30_AXI_LI_GRP_CLK, - L_7X30_AXI_LI_JPEG_CLK, - L_7X30_AXI_GRP_2D_CLK, - L_7X30_AXI_MFC_CLK, - L_7X30_AXI_VPE_CLK, - L_7X30_AXI_LI_VFE_CLK, - L_7X30_AXI_LI_APPS_CLK, - L_7X30_AXI_MDP_CLK, - L_7X30_AXI_IMEM_CLK, - L_7X30_AXI_LI_ADSP_A_CLK, - L_7X30_AXI_ROTATOR_CLK, - - L_7X30_NR_CLKS -}; - -struct clk_ops; -extern struct clk_ops clk_ops_7x30; - -struct clk_ops *clk_7x30_is_local(uint32_t id); -int clk_7x30_init(void); - -void pll_enable(uint32_t pll); -void pll_disable(uint32_t pll); - -extern int internal_pwr_rail_ctl_auto(unsigned rail_id, bool enable); - -#define CLK_7X30(clk_name, clk_id, clk_dev, clk_flags) { \ - .con_id = clk_name, \ - .dev_id = clk_dev, \ - .clk = &(struct clk){ \ - .id = L_7X30_##clk_id, \ - .remote_id = P_##clk_id, \ - .flags = clk_flags, \ - .dbg_name = #clk_id, \ - }, \ - } - -#define CLK_7X30S(clk_name, l_id, r_id, clk_dev, clk_flags) { \ - .con_id = clk_name, \ - .dev_id = clk_dev, \ - .clk = &(struct clk){ \ - .id = L_7X30_##l_id, \ - .remote_id = P_##r_id, \ - .flags = clk_flags, \ - .dbg_name = #l_id, \ - .ops = &clk_ops_pcom, \ - }, \ - } - -#endif diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c deleted file mode 100644 index b0fbdf1cbdd1..000000000000 --- a/arch/arm/mach-msm/clock-debug.c +++ /dev/null @@ -1,130 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/ctype.h> -#include <linux/debugfs.h> -#include <linux/clk.h> -#include "clock.h" - -static int clock_debug_rate_set(void *data, u64 val) -{ - struct clk *clock = data; - int ret; - - /* Only increases to max rate will succeed, but that's actually good - * for debugging purposes so we don't check for error. */ - if (clock->flags & CLK_MAX) - clk_set_max_rate(clock, val); - if (clock->flags & CLK_MIN) - ret = clk_set_min_rate(clock, val); - else - ret = clk_set_rate(clock, val); - if (ret != 0) - printk(KERN_ERR "clk_set%s_rate failed (%d)\n", - (clock->flags & CLK_MIN) ? "_min" : "", ret); - return ret; -} - -static int clock_debug_rate_get(void *data, u64 *val) -{ - struct clk *clock = data; - *val = clk_get_rate(clock); - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(clock_rate_fops, clock_debug_rate_get, - clock_debug_rate_set, "%llu\n"); - -static int clock_debug_enable_set(void *data, u64 val) -{ - struct clk *clock = data; - int rc = 0; - - if (val) - rc = clock->ops->enable(clock->id); - else - clock->ops->disable(clock->id); - - return rc; -} - -static int clock_debug_enable_get(void *data, u64 *val) -{ - struct clk *clock = data; - - *val = clock->ops->is_enabled(clock->id); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(clock_enable_fops, clock_debug_enable_get, - clock_debug_enable_set, "%llu\n"); - -static int clock_debug_local_get(void *data, u64 *val) -{ - struct clk *clock = data; - - *val = clock->ops->is_local(clock->id); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(clock_local_fops, clock_debug_local_get, - NULL, "%llu\n"); - -static struct dentry *debugfs_base; - -int __init clock_debug_init(void) -{ - debugfs_base = debugfs_create_dir("clk", NULL); - if (!debugfs_base) - return -ENOMEM; - return 0; -} - -int __init clock_debug_add(struct clk *clock) -{ - char temp[50], *ptr; - struct dentry *clk_dir; - - if (!debugfs_base) - return -ENOMEM; - - strlcpy(temp, clock->dbg_name, ARRAY_SIZE(temp)); - for (ptr = temp; *ptr; ptr++) - *ptr = tolower(*ptr); - - clk_dir = debugfs_create_dir(temp, debugfs_base); - if (!clk_dir) - return -ENOMEM; - - if (!debugfs_create_file("rate", S_IRUGO | S_IWUSR, clk_dir, - clock, &clock_rate_fops)) - goto error; - - if (!debugfs_create_file("enable", S_IRUGO | S_IWUSR, clk_dir, - clock, &clock_enable_fops)) - goto error; - - if (!debugfs_create_file("is_local", S_IRUGO, clk_dir, clock, - &clock_local_fops)) - goto error; - return 0; -error: - debugfs_remove_recursive(clk_dir); - return -ENOMEM; -} diff --git a/arch/arm/mach-msm/clock-pcom.c b/arch/arm/mach-msm/clock-pcom.c index a52c970df157..9a80449518e6 100644 --- a/arch/arm/mach-msm/clock-pcom.c +++ b/arch/arm/mach-msm/clock-pcom.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -13,20 +13,33 @@ * */ +#include <linux/kernel.h> #include <linux/err.h> -#include <linux/ctype.h> -#include <linux/stddef.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> + #include <mach/clk.h> #include "proc_comm.h" #include "clock.h" #include "clock-pcom.h" -/* - * glue for the proc_comm interface - */ -static int pc_clk_enable(unsigned id) +struct clk_pcom { + unsigned id; + unsigned long flags; + struct msm_clk msm_clk; +}; + +static inline struct clk_pcom *to_clk_pcom(struct clk_hw *hw) { + return container_of(to_msm_clk(hw), struct clk_pcom, msm_clk); +} + +static int pc_clk_enable(struct clk_hw *hw) +{ + unsigned id = to_clk_pcom(hw)->id; int rc = msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); if (rc < 0) return rc; @@ -34,14 +47,16 @@ static int pc_clk_enable(unsigned id) return (int)id < 0 ? -EINVAL : 0; } -static void pc_clk_disable(unsigned id) +static void pc_clk_disable(struct clk_hw *hw) { + unsigned id = to_clk_pcom(hw)->id; msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); } -int pc_clk_reset(unsigned id, enum clk_reset_action action) +static int pc_clk_reset(struct clk_hw *hw, enum clk_reset_action action) { int rc; + unsigned id = to_clk_pcom(hw)->id; if (action == CLK_RESET_ASSERT) rc = msm_proc_comm(PCOM_CLKCTL_RPC_RESET_ASSERT, &id, NULL); @@ -54,85 +69,109 @@ int pc_clk_reset(unsigned id, enum clk_reset_action action) return (int)id < 0 ? -EINVAL : 0; } -static int pc_clk_set_rate(unsigned id, unsigned rate) +static int pc_clk_set_rate(struct clk_hw *hw, unsigned long new_rate, + unsigned long p_rate) { - /* The rate _might_ be rounded off to the nearest KHz value by the + struct clk_pcom *p = to_clk_pcom(hw); + unsigned id = p->id, rate = new_rate; + int rc; + + /* + * The rate _might_ be rounded off to the nearest KHz value by the * remote function. So a return value of 0 doesn't necessarily mean * that the exact rate was set successfully. */ - int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static int pc_clk_set_min_rate(unsigned id, unsigned rate) -{ - int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); - if (rc < 0) - return rc; - else - return (int)id < 0 ? -EINVAL : 0; -} - -static int pc_clk_set_max_rate(unsigned id, unsigned rate) -{ - int rc = msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate); - if (rc < 0) - return rc; + if (p->flags & CLKFLAG_MIN) + rc = msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); else - return (int)id < 0 ? -EINVAL : 0; -} - -static int pc_clk_set_flags(unsigned id, unsigned flags) -{ - int rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags); + rc = msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); if (rc < 0) return rc; else return (int)id < 0 ? -EINVAL : 0; } -static unsigned pc_clk_get_rate(unsigned id) +static unsigned long pc_clk_recalc_rate(struct clk_hw *hw, unsigned long p_rate) { + unsigned id = to_clk_pcom(hw)->id; if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) return 0; else return id; } -static unsigned pc_clk_is_enabled(unsigned id) +static int pc_clk_is_enabled(struct clk_hw *hw) { + unsigned id = to_clk_pcom(hw)->id; if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) return 0; else return id; } -static long pc_clk_round_rate(unsigned id, unsigned rate) +static long pc_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *p_rate) { - /* Not really supported; pc_clk_set_rate() does rounding on it's own. */ return rate; } -static bool pc_clk_is_local(unsigned id) -{ - return false; -} - -struct clk_ops clk_ops_pcom = { +static struct clk_ops clk_ops_pcom = { .enable = pc_clk_enable, .disable = pc_clk_disable, - .auto_off = pc_clk_disable, - .reset = pc_clk_reset, .set_rate = pc_clk_set_rate, - .set_min_rate = pc_clk_set_min_rate, - .set_max_rate = pc_clk_set_max_rate, - .set_flags = pc_clk_set_flags, - .get_rate = pc_clk_get_rate, + .recalc_rate = pc_clk_recalc_rate, .is_enabled = pc_clk_is_enabled, .round_rate = pc_clk_round_rate, - .is_local = pc_clk_is_local, }; + +static int msm_clock_pcom_probe(struct platform_device *pdev) +{ + const struct pcom_clk_pdata *pdata = pdev->dev.platform_data; + int i, ret; + + for (i = 0; i < pdata->num_lookups; i++) { + const struct clk_pcom_desc *desc = &pdata->lookup[i]; + struct clk *c; + struct clk_pcom *p; + struct clk_hw *hw; + struct clk_init_data init; + + p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL); + if (!p) + return -ENOMEM; + + p->id = desc->id; + p->flags = desc->flags; + p->msm_clk.reset = pc_clk_reset; + + hw = &p->msm_clk.hw; + hw->init = &init; + + init.name = desc->name; + init.ops = &clk_ops_pcom; + init.num_parents = 0; + init.flags = CLK_IS_ROOT; + + if (!(p->flags & CLKFLAG_AUTO_OFF)) + init.flags |= CLK_IGNORE_UNUSED; + + c = devm_clk_register(&pdev->dev, hw); + ret = clk_register_clkdev(c, desc->con, desc->dev); + if (ret) + return ret; + } + + return 0; +} + +static struct platform_driver msm_clock_pcom_driver = { + .probe = msm_clock_pcom_probe, + .driver = { + .name = "msm-clock-pcom", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(msm_clock_pcom_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/arch/arm/mach-msm/clock-pcom.h b/arch/arm/mach-msm/clock-pcom.h index 974d0032f3a3..5bb164fd46a8 100644 --- a/arch/arm/mach-msm/clock-pcom.h +++ b/arch/arm/mach-msm/clock-pcom.h @@ -1,4 +1,5 @@ -/* Copyright (c) 2009, Code Aurora Forum. All rights reserved. +/* + * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -120,21 +121,25 @@ #define P_NR_CLKS 102 -struct clk_ops; -extern struct clk_ops clk_ops_pcom; +struct clk_pcom_desc { + unsigned id; + const char *name; + const char *con; + const char *dev; + unsigned long flags; +}; -int pc_clk_reset(unsigned id, enum clk_reset_action action); +struct pcom_clk_pdata { + struct clk_pcom_desc *lookup; + u32 num_lookups; +}; #define CLK_PCOM(clk_name, clk_id, clk_dev, clk_flags) { \ - .con_id = clk_name, \ - .dev_id = clk_dev, \ - .clk = &(struct clk){ \ - .id = P_##clk_id, \ - .remote_id = P_##clk_id, \ - .ops = &clk_ops_pcom, \ - .flags = clk_flags, \ - .dbg_name = #clk_id, \ - }, \ + .id = P_##clk_id, \ + .name = #clk_id, \ + .con = clk_name, \ + .dev = clk_dev, \ + .flags = clk_flags, \ } #endif diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c index d9145dfc2a3b..35ea02b52483 100644 --- a/arch/arm/mach-msm/clock.c +++ b/arch/arm/mach-msm/clock.c @@ -1,7 +1,7 @@ /* arch/arm/mach-msm/clock.c * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -14,171 +14,15 @@ * */ -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/spinlock.h> -#include <linux/pm_qos.h> -#include <linux/mutex.h> -#include <linux/clk.h> -#include <linux/string.h> +#include <linux/clk-provider.h> #include <linux/module.h> -#include <linux/clkdev.h> #include "clock.h" -static DEFINE_MUTEX(clocks_mutex); -static DEFINE_SPINLOCK(clocks_lock); -static LIST_HEAD(clocks); - -/* - * Standard clock functions defined in include/linux/clk.h - */ -int clk_enable(struct clk *clk) -{ - unsigned long flags; - spin_lock_irqsave(&clocks_lock, flags); - clk->count++; - if (clk->count == 1) - clk->ops->enable(clk->id); - spin_unlock_irqrestore(&clocks_lock, flags); - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - spin_lock_irqsave(&clocks_lock, flags); - BUG_ON(clk->count == 0); - clk->count--; - if (clk->count == 0) - clk->ops->disable(clk->id); - spin_unlock_irqrestore(&clocks_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - int clk_reset(struct clk *clk, enum clk_reset_action action) { - return clk->ops->reset(clk->remote_id, action); + struct clk_hw *hw = __clk_get_hw(clk); + struct msm_clk *m = to_msm_clk(hw); + return m->reset(hw, action); } EXPORT_SYMBOL(clk_reset); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->ops->get_rate(clk->id); -} -EXPORT_SYMBOL(clk_get_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret; - if (clk->flags & CLKFLAG_MAX) { - ret = clk->ops->set_max_rate(clk->id, rate); - if (ret) - return ret; - } - if (clk->flags & CLKFLAG_MIN) { - ret = clk->ops->set_min_rate(clk->id, rate); - if (ret) - return ret; - } - - if (clk->flags & CLKFLAG_MAX || clk->flags & CLKFLAG_MIN) - return ret; - - return clk->ops->set_rate(clk->id, rate); -} -EXPORT_SYMBOL(clk_set_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk->ops->round_rate(clk->id, rate); -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_min_rate(struct clk *clk, unsigned long rate) -{ - return clk->ops->set_min_rate(clk->id, rate); -} -EXPORT_SYMBOL(clk_set_min_rate); - -int clk_set_max_rate(struct clk *clk, unsigned long rate) -{ - return clk->ops->set_max_rate(clk->id, rate); -} -EXPORT_SYMBOL(clk_set_max_rate); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - return -ENOSYS; -} -EXPORT_SYMBOL(clk_set_parent); - -struct clk *clk_get_parent(struct clk *clk) -{ - return ERR_PTR(-ENOSYS); -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_set_flags(struct clk *clk, unsigned long flags) -{ - if (clk == NULL || IS_ERR(clk)) - return -EINVAL; - return clk->ops->set_flags(clk->id, flags); -} -EXPORT_SYMBOL(clk_set_flags); - -/* EBI1 is the only shared clock that several clients want to vote on as of - * this commit. If this changes in the future, then it might be better to - * make clk_min_rate handle the voting or make ebi1_clk_set_min_rate more - * generic to support different clocks. - */ -static struct clk *ebi1_clk; - -void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks) -{ - unsigned n; - - mutex_lock(&clocks_mutex); - for (n = 0; n < num_clocks; n++) { - clkdev_add(&clock_tbl[n]); - list_add_tail(&clock_tbl[n].clk->list, &clocks); - } - mutex_unlock(&clocks_mutex); - - ebi1_clk = clk_get(NULL, "ebi1_clk"); - BUG_ON(ebi1_clk == NULL); - -} - -/* The bootloader and/or AMSS may have left various clocks enabled. - * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have - * not been explicitly enabled by a clk_enable() call. - */ -static int __init clock_late_init(void) -{ - unsigned long flags; - struct clk *clk; - unsigned count = 0; - - clock_debug_init(); - mutex_lock(&clocks_mutex); - list_for_each_entry(clk, &clocks, list) { - clock_debug_add(clk); - if (clk->flags & CLKFLAG_AUTO_OFF) { - spin_lock_irqsave(&clocks_lock, flags); - if (!clk->count) { - count++; - clk->ops->auto_off(clk->id); - } - spin_unlock_irqrestore(&clocks_lock, flags); - } - } - mutex_unlock(&clocks_mutex); - pr_info("clock_late_init() disabled %d unused clocks\n", count); - return 0; -} - -late_initcall(clock_late_init); - diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h index 2c007f606d29..42d29dd7aafc 100644 --- a/arch/arm/mach-msm/clock.h +++ b/arch/arm/mach-msm/clock.h @@ -1,7 +1,7 @@ /* arch/arm/mach-msm/clock.h * * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2007-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2007-2012, The Linux Foundation. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -17,56 +17,27 @@ #ifndef __ARCH_ARM_MACH_MSM_CLOCK_H #define __ARCH_ARM_MACH_MSM_CLOCK_H -#include <linux/init.h> -#include <linux/list.h> +#include <linux/clk-provider.h> #include <mach/clk.h> -#define CLKFLAG_INVERT 0x00000001 -#define CLKFLAG_NOINVERT 0x00000002 -#define CLKFLAG_NONEST 0x00000004 -#define CLKFLAG_NORESET 0x00000008 - #define CLK_FIRST_AVAILABLE_FLAG 0x00000100 #define CLKFLAG_AUTO_OFF 0x00000200 #define CLKFLAG_MIN 0x00000400 #define CLKFLAG_MAX 0x00000800 -struct clk_ops { - int (*enable)(unsigned id); - void (*disable)(unsigned id); - void (*auto_off)(unsigned id); - int (*reset)(unsigned id, enum clk_reset_action action); - int (*set_rate)(unsigned id, unsigned rate); - int (*set_min_rate)(unsigned id, unsigned rate); - int (*set_max_rate)(unsigned id, unsigned rate); - int (*set_flags)(unsigned id, unsigned flags); - unsigned (*get_rate)(unsigned id); - unsigned (*is_enabled)(unsigned id); - long (*round_rate)(unsigned id, unsigned rate); - bool (*is_local)(unsigned id); -}; - -struct clk { - uint32_t id; - uint32_t remote_id; - uint32_t count; - uint32_t flags; - struct clk_ops *ops; - const char *dbg_name; - struct list_head list; -}; - #define OFF CLKFLAG_AUTO_OFF #define CLK_MIN CLKFLAG_MIN #define CLK_MAX CLKFLAG_MAX #define CLK_MINMAX (CLK_MIN | CLK_MAX) -#ifdef CONFIG_DEBUG_FS -int __init clock_debug_init(void); -int __init clock_debug_add(struct clk *clock); -#else -static inline int __init clock_debug_init(void) { return 0; } -static inline int __init clock_debug_add(struct clk *clock) { return 0; } -#endif +struct msm_clk { + int (*reset)(struct clk_hw *hw, enum clk_reset_action action); + struct clk_hw hw; +}; + +static inline struct msm_clk *to_msm_clk(struct clk_hw *hw) +{ + return container_of(hw, struct msm_clk, hw); +} #endif diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c index 1a0a2306b115..6d50fb964863 100644 --- a/arch/arm/mach-msm/devices-msm7x00.c +++ b/arch/arm/mach-msm/devices-msm7x00.c @@ -425,7 +425,7 @@ struct platform_device msm_device_mdp = { .resource = resources_mdp, }; -struct clk_lookup msm_clocks_7x01a[] = { +static struct clk_pcom_desc msm_clocks_7x01a[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, 0), @@ -469,4 +469,12 @@ struct clk_lookup msm_clocks_7x01a[] = { CLK_PCOM("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF), }; -unsigned msm_num_clocks_7x01a = ARRAY_SIZE(msm_clocks_7x01a); +static struct pcom_clk_pdata msm_clock_7x01a_pdata = { + .lookup = msm_clocks_7x01a, + .num_lookups = ARRAY_SIZE(msm_clocks_7x01a), +}; + +struct platform_device msm_clock_7x01a = { + .name = "msm-clock-pcom", + .dev.platform_data = &msm_clock_7x01a_pdata, +}; diff --git a/arch/arm/mach-msm/devices-msm7x30.c b/arch/arm/mach-msm/devices-msm7x30.c index 12f482c07740..d4db75acff56 100644 --- a/arch/arm/mach-msm/devices-msm7x30.c +++ b/arch/arm/mach-msm/devices-msm7x30.c @@ -28,8 +28,8 @@ #include <asm/mach/flash.h> +#include "clock.h" #include "clock-pcom.h" -#include "clock-7x30.h" #include <linux/platform_data/mmc-msm_sdcc.h> @@ -161,7 +161,7 @@ struct platform_device msm_device_hsusb_host = { }, }; -struct clk_lookup msm_clocks_7x30[] = { +static struct clk_pcom_desc msm_clocks_7x30[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("adsp_clk", ADSP_CLK, NULL, 0), CLK_PCOM("cam_m_clk", CAM_M_CLK, NULL, 0), @@ -177,7 +177,6 @@ struct clk_lookup msm_clocks_7x30[] = { CLK_PCOM("grp_2d_pclk", GRP_2D_P_CLK, NULL, 0), CLK_PCOM("grp_clk", GRP_3D_CLK, NULL, 0), CLK_PCOM("grp_pclk", GRP_3D_P_CLK, NULL, 0), - CLK_7X30S("grp_src_clk", GRP_3D_SRC_CLK, GRP_3D_CLK, NULL, 0), CLK_PCOM("hdmi_clk", HDMI_CLK, NULL, 0), CLK_PCOM("imem_clk", IMEM_CLK, NULL, OFF), CLK_PCOM("jpeg_clk", JPEG_CLK, NULL, OFF), @@ -210,7 +209,6 @@ struct clk_lookup msm_clocks_7x30[] = { CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF), CLK_PCOM("spi_clk", SPI_CLK, NULL, 0), CLK_PCOM("spi_pclk", SPI_P_CLK, NULL, 0), - CLK_7X30S("tv_src_clk", TV_CLK, TV_ENC_CLK, NULL, 0), CLK_PCOM("tv_dac_clk", TV_DAC_CLK, NULL, 0), CLK_PCOM("tv_enc_clk", TV_ENC_CLK, NULL, 0), CLK_PCOM("uart_clk", UART2_CLK, "msm_serial.1", 0), @@ -237,5 +235,12 @@ struct clk_lookup msm_clocks_7x30[] = { CLK_PCOM("csi_vfe_clk", CSI0_VFE_CLK, NULL, 0), }; -unsigned msm_num_clocks_7x30 = ARRAY_SIZE(msm_clocks_7x30); +static struct pcom_clk_pdata msm_clock_7x30_pdata = { + .lookup = msm_clocks_7x30, + .num_lookups = ARRAY_SIZE(msm_clocks_7x30), +}; +struct platform_device msm_clock_7x30 = { + .name = "msm-clock-pcom", + .dev.platform_data = &msm_clock_7x30_pdata, +}; diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c index 2e1b3ec9dfc7..f5518112284b 100644 --- a/arch/arm/mach-msm/devices-qsd8x50.c +++ b/arch/arm/mach-msm/devices-qsd8x50.c @@ -28,6 +28,7 @@ #include <asm/mach/flash.h> #include <linux/platform_data/mmc-msm_sdcc.h> +#include "clock.h" #include "clock-pcom.h" static struct resource msm_gpio_resources[] = { @@ -322,7 +323,7 @@ int __init msm_add_sdcc(unsigned int controller, return platform_device_register(pdev); } -struct clk_lookup msm_clocks_8x50[] = { +static struct clk_pcom_desc msm_clocks_8x50[] = { CLK_PCOM("adm_clk", ADM_CLK, NULL, 0), CLK_PCOM("ce_clk", CE_CLK, NULL, 0), CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN), @@ -376,5 +377,12 @@ struct clk_lookup msm_clocks_8x50[] = { CLK_PCOM("usb_phy_clk", USB_PHY_CLK, NULL, 0), }; -unsigned msm_num_clocks_8x50 = ARRAY_SIZE(msm_clocks_8x50); +static struct pcom_clk_pdata msm_clock_8x50_pdata = { + .lookup = msm_clocks_8x50, + .num_lookups = ARRAY_SIZE(msm_clocks_8x50), +}; +struct platform_device msm_clock_8x50 = { + .name = "msm-clock-pcom", + .dev.platform_data = &msm_clock_8x50_pdata, +}; diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h index da902cf51161..dccefad9f9b9 100644 --- a/arch/arm/mach-msm/devices.h +++ b/arch/arm/mach-msm/devices.h @@ -16,10 +16,6 @@ #ifndef __ARCH_ARM_MACH_MSM_DEVICES_H #define __ARCH_ARM_MACH_MSM_DEVICES_H -#include <linux/clkdev.h> - -#include "clock.h" - extern struct platform_device msm_device_gpio_7201; extern struct platform_device msm_device_gpio_7x30; extern struct platform_device msm_device_gpio_8x50; @@ -50,13 +46,8 @@ extern struct platform_device msm_device_mddi0; extern struct platform_device msm_device_mddi1; extern struct platform_device msm_device_mdp; -extern struct clk_lookup msm_clocks_7x01a[]; -extern unsigned msm_num_clocks_7x01a; - -extern struct clk_lookup msm_clocks_7x30[]; -extern unsigned msm_num_clocks_7x30; - -extern struct clk_lookup msm_clocks_8x50[]; -extern unsigned msm_num_clocks_8x50; +extern struct platform_device msm_clock_7x01a; +extern struct platform_device msm_clock_7x30; +extern struct platform_device msm_clock_8x50; #endif diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index b279fd8a31b1..f8f6adfa07c6 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -284,6 +284,7 @@ static int __init msm_init_datamover(void) clk = clk_get(NULL, "adm_clk"); if (IS_ERR(clk)) return PTR_ERR(clk); + clk_prepare(clk); msm_dmov_clk = clk; ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); if (ret) @@ -291,6 +292,4 @@ static int __init msm_init_datamover(void) disable_irq(INT_ADM_AARM); return 0; } - -arch_initcall(msm_init_datamover); - +module_init(msm_init_datamover); diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index 8cebedb11233..c34e246a3e07 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -20,16 +20,11 @@ #include <linux/types.h> #include <linux/platform_data/mmc-msm_sdcc.h> -/* platform device data structures */ - -struct clk_lookup; - /* common init routines for use by arch/arm/mach-msm/board-*.c */ void __init msm_add_devices(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); -void __init msm_clock_init(struct clk_lookup *clock_tbl, unsigned num_clocks); int __init msm_add_sdcc(unsigned int controller, struct msm_mmc_platform_data *plat, unsigned int stat_irq, unsigned long stat_irq_flags); diff --git a/arch/arm/mach-msm/include/mach/clk.h b/arch/arm/mach-msm/include/mach/clk.h index e8d38428d813..fd4f4a7a83b3 100644 --- a/arch/arm/mach-msm/include/mach/clk.h +++ b/arch/arm/mach-msm/include/mach/clk.h @@ -25,16 +25,7 @@ enum clk_reset_action { struct clk; -/* Rate is minimum clock rate in Hz */ -int clk_set_min_rate(struct clk *clk, unsigned long rate); - -/* Rate is maximum clock rate in Hz */ -int clk_set_max_rate(struct clk *clk, unsigned long rate); - /* Assert/Deassert reset to a hardware block associated with a clock */ int clk_reset(struct clk *clk, enum clk_reset_action action); -/* Set clock-specific configuration parameters */ -int clk_set_flags(struct clk *clk, unsigned long flags); - #endif diff --git a/arch/arm/mach-nspire/Kconfig b/arch/arm/mach-nspire/Kconfig new file mode 100644 index 000000000000..59d8f0a70919 --- /dev/null +++ b/arch/arm/mach-nspire/Kconfig @@ -0,0 +1,16 @@ +config ARCH_NSPIRE + bool "TI-NSPIRE based" + depends on ARCH_MULTI_V4_V5 + depends on MMU + select CPU_ARM926T + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select GENERIC_IRQ_CHIP + select SPARSE_IRQ + select ARM_AMBA + select ARM_VIC + select ARM_TIMER_SP804 + select USE_OF + select CLKSRC_OF + help + This enables support for systems using the TI-NSPIRE CPU diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile new file mode 100644 index 000000000000..1bec256eba07 --- /dev/null +++ b/arch/arm/mach-nspire/Makefile @@ -0,0 +1,2 @@ +obj-y += nspire.o +obj-y += clcd.o diff --git a/arch/arm/mach-nspire/Makefile.boot b/arch/arm/mach-nspire/Makefile.boot new file mode 100644 index 000000000000..e69de29bb2d1 --- /dev/null +++ b/arch/arm/mach-nspire/Makefile.boot diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c new file mode 100644 index 000000000000..abea12617b17 --- /dev/null +++ b/arch/arm/mach-nspire/clcd.c @@ -0,0 +1,119 @@ +/* + * linux/arch/arm/mach-nspire/clcd.c + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#include <linux/init.h> +#include <linux/of.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <linux/dma-mapping.h> + +static struct clcd_panel nspire_cx_lcd_panel = { + .mode = { + .name = "Color LCD", + .refresh = 60, + .xres = 320, + .yres = 240, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .pixclock = 1, + .hsync_len = 6, + .vsync_len = 1, + .right_margin = 50, + .left_margin = 38, + .lower_margin = 3, + .upper_margin = 17, + }, + .width = 65, /* ~6.50 cm */ + .height = 49, /* ~4.87 cm */ + .tim2 = TIM2_IPC, + .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), + .bpp = 16, + .caps = CLCD_CAP_565, +}; + +static struct clcd_panel nspire_classic_lcd_panel = { + .mode = { + .name = "Grayscale LCD", + .refresh = 60, + .xres = 320, + .yres = 240, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .vmode = FB_VMODE_NONINTERLACED, + .pixclock = 1, + .hsync_len = 6, + .vsync_len = 1, + .right_margin = 6, + .left_margin = 6, + }, + .width = 71, /* 7.11cm */ + .height = 53, /* 5.33cm */ + .tim2 = 0x80007d0, + .cntl = CNTL_LCDMONO8, + .bpp = 8, + .grayscale = 1, + .caps = CLCD_CAP_5551, +}; + +int nspire_clcd_setup(struct clcd_fb *fb) +{ + struct clcd_panel *panel; + size_t panel_size; + const char *type; + dma_addr_t dma; + int err; + + BUG_ON(!fb->dev->dev.of_node); + + err = of_property_read_string(fb->dev->dev.of_node, "lcd-type", &type); + if (err) { + pr_err("CLCD: Could not find lcd-type property\n"); + return err; + } + + if (!strcmp(type, "cx")) { + panel = &nspire_cx_lcd_panel; + } else if (!strcmp(type, "classic")) { + panel = &nspire_classic_lcd_panel; + } else { + pr_err("CLCD: Unknown lcd-type %s\n", type); + return -EINVAL; + } + + panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8; + panel_size = ALIGN(panel_size, PAGE_SIZE); + + fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, + panel_size, &dma, GFP_KERNEL); + + if (!fb->fb.screen_base) { + pr_err("CLCD: unable to map framebuffer\n"); + return -ENOMEM; + } + + fb->fb.fix.smem_start = dma; + fb->fb.fix.smem_len = panel_size; + fb->panel = panel; + + return 0; +} + +int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) +{ + return dma_mmap_writecombine(&fb->dev->dev, vma, + fb->fb.screen_base, fb->fb.fix.smem_start, + fb->fb.fix.smem_len); +} + +void nspire_clcd_remove(struct clcd_fb *fb) +{ + dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len, + fb->fb.screen_base, fb->fb.fix.smem_start); +} diff --git a/arch/arm/mach-nspire/clcd.h b/arch/arm/mach-nspire/clcd.h new file mode 100644 index 000000000000..8c33d2c18371 --- /dev/null +++ b/arch/arm/mach-nspire/clcd.h @@ -0,0 +1,14 @@ +/* + * linux/arch/arm/mach-nspire/clcd.h + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +int nspire_clcd_setup(struct clcd_fb *fb); +int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma); +void nspire_clcd_remove(struct clcd_fb *fb); diff --git a/arch/arm/mach-nspire/mmio.h b/arch/arm/mach-nspire/mmio.h new file mode 100644 index 000000000000..8813471af4cf --- /dev/null +++ b/arch/arm/mach-nspire/mmio.h @@ -0,0 +1,20 @@ +/* + * linux/arch/arm/mach-nspire/mmio.h + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ + +#define NSPIRE_MISC_PHYS_BASE 0x900A0000 +#define NSPIRE_MISC_HWRESET 0x08 + +#define NSPIRE_PWR_PHYS_BASE 0x900B0000 +#define NSPIRE_PWR_VIRT_BASE 0xFEEB0000 +#define NSPIRE_PWR_BUS_DISABLE1 0x18 +#define NSPIRE_PWR_BUS_DISABLE2 0x20 + +#define NSPIRE_LCD_PHYS_BASE 0xC0000000 diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c new file mode 100644 index 000000000000..99e26092a9f7 --- /dev/null +++ b/arch/arm/mach-nspire/nspire.c @@ -0,0 +1,89 @@ +/* + * linux/arch/arm/mach-nspire/nspire.c + * + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include <linux/init.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/irqchip.h> +#include <linux/irqchip/arm-vic.h> +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/amba/bus.h> +#include <linux/amba/clcd.h> +#include <linux/clocksource.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> +#include <asm/mach/map.h> + +#include <asm/hardware/timer-sp.h> + +#include "mmio.h" +#include "clcd.h" + +static const char *nspire_dt_match[] __initconst = { + "ti,nspire", + "ti,nspire-cx", + "ti,nspire-tp", + "ti,nspire-clp", + NULL, +}; + +static void __init nspire_map_io(void) +{ + debug_ll_io_init(); +} + +static struct clcd_board nspire_clcd_data = { + .name = "LCD", + .caps = CLCD_CAP_5551 | CLCD_CAP_565, + .check = clcdfb_check, + .decode = clcdfb_decode, + .setup = nspire_clcd_setup, + .mmap = nspire_clcd_mmap, + .remove = nspire_clcd_remove, +}; + + +static struct of_dev_auxdata nspire_auxdata[] __initdata = { + OF_DEV_AUXDATA("arm,pl111", NSPIRE_LCD_PHYS_BASE, + NULL, &nspire_clcd_data), + { } +}; + +static void __init nspire_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + nspire_auxdata, NULL); +} + +static void __init nspire_init_time(void) +{ + of_clk_init(NULL); + clocksource_of_init(); +} + +static void nspire_restart(char mode, const char *cmd) +{ + void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K); + if (!base) + return; + + writel(2, base + NSPIRE_MISC_HWRESET); +} + +DT_MACHINE_START(NSPIRE, "TI-NSPIRE") + .dt_compat = nspire_dt_match, + .map_io = nspire_map_io, + .init_time = nspire_init_time, + .init_machine = nspire_init, + .restart = nspire_restart, +MACHINE_END diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c index b461d93431ed..28f94752b8ff 100644 --- a/arch/arm/mach-shmobile/setup-r8a7790.c +++ b/arch/arm/mach-shmobile/setup-r8a7790.c @@ -30,17 +30,17 @@ #include <mach/r8a7790.h> #include <asm/mach/arch.h> -static const struct resource pfc_resources[] = { +static struct resource pfc_resources[] __initdata = { DEFINE_RES_MEM(0xe6060000, 0x250), }; #define R8A7790_GPIO(idx) \ -static struct resource r8a7790_gpio##idx##_resources[] = { \ +static struct resource r8a7790_gpio##idx##_resources[] __initdata = { \ DEFINE_RES_MEM(0xe6050000 + 0x1000 * (idx), 0x50), \ DEFINE_RES_IRQ(gic_spi(4 + (idx))), \ }; \ \ -static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data = { \ +static struct gpio_rcar_config r8a7790_gpio##idx##_platform_data __initdata = { \ .gpio_base = 32 * (idx), \ .irq_base = 0, \ .number_of_pins = 32, \ @@ -98,12 +98,20 @@ void __init r8a7790_pinmux_init(void) [index] = { \ SCIF_COMMON(PORT_SCIF, baseaddr, irq), \ .scbrr_algo_id = SCBRR_ALGO_2, \ - .scscr = SCSCR_RE | SCSCR_TE | SCSCR_CKE1, \ + .scscr = SCSCR_RE | SCSCR_TE, \ } -enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1 }; +#define HSCIF_DATA(index, baseaddr, irq) \ +[index] = { \ + SCIF_COMMON(PORT_HSCIF, baseaddr, irq), \ + .scbrr_algo_id = SCBRR_ALGO_6, \ + .scscr = SCSCR_RE | SCSCR_TE, \ +} + +enum { SCIFA0, SCIFA1, SCIFB0, SCIFB1, SCIFB2, SCIFA2, SCIF0, SCIF1, + HSCIF0, HSCIF1 }; -static const struct plat_sci_port scif[] = { +static struct plat_sci_port scif[] __initdata = { SCIFA_DATA(SCIFA0, 0xe6c40000, gic_spi(144)), /* SCIFA0 */ SCIFA_DATA(SCIFA1, 0xe6c50000, gic_spi(145)), /* SCIFA1 */ SCIFB_DATA(SCIFB0, 0xe6c20000, gic_spi(148)), /* SCIFB0 */ @@ -112,6 +120,8 @@ static const struct plat_sci_port scif[] = { SCIFA_DATA(SCIFA2, 0xe6c60000, gic_spi(151)), /* SCIFA2 */ SCIF_DATA(SCIF0, 0xe6e60000, gic_spi(152)), /* SCIF0 */ SCIF_DATA(SCIF1, 0xe6e68000, gic_spi(153)), /* SCIF1 */ + HSCIF_DATA(HSCIF0, 0xe62c0000, gic_spi(154)), /* HSCIF0 */ + HSCIF_DATA(HSCIF1, 0xe62c8000, gic_spi(155)), /* HSCIF1 */ }; static inline void r8a7790_register_scif(int idx) @@ -120,11 +130,11 @@ static inline void r8a7790_register_scif(int idx) sizeof(struct plat_sci_port)); } -static struct renesas_irqc_config irqc0_data = { +static struct renesas_irqc_config irqc0_data __initdata = { .irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */ }; -static struct resource irqc0_resources[] = { +static struct resource irqc0_resources[] __initdata = { DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */ DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */ DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */ @@ -149,6 +159,8 @@ void __init r8a7790_add_standard_devices(void) r8a7790_register_scif(SCIFA2); r8a7790_register_scif(SCIF0); r8a7790_register_scif(SCIF1); + r8a7790_register_scif(HSCIF0); + r8a7790_register_scif(HSCIF1); r8a7790_register_irqc(0); } diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig new file mode 100644 index 000000000000..d04e3bfe1918 --- /dev/null +++ b/arch/arm/mach-sti/Kconfig @@ -0,0 +1,45 @@ +menuconfig ARCH_STI + bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7 + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select ARM_GIC + select ARM_GLOBAL_TIMER + select PINCTRL + select PINCTRL_ST + select MFD_SYSCON + select MIGHT_HAVE_CACHE_L2X0 + select HAVE_SMP + select HAVE_ARM_SCU if SMP + select ARCH_REQUIRE_GPIOLIB + select ARM_ERRATA_720789 + select ARM_ERRATA_754322 + select PL310_ERRATA_753970 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + help + Include support for STiH41x SOCs like STiH415/416 using the device tree + for discovery + More information at Documentation/arm/STiH41x and + at Documentation/devicetree + + +if ARCH_STI + +config SOC_STIH415 + bool "STiH415 STMicroelectronics Consumer Electronics family" + default y + help + This enables support for STMicroelectronics Digital Consumer + Electronics family StiH415 parts, primarily targetted at set-top-box + and other digital audio/video applications using Flattned Device + Trees. + +config SOC_STIH416 + bool "STiH416 STMicroelectronics Consumer Electronics family" + default y + help + This enables support for STMicroelectronics Digital Consumer + Electronics family StiH416 parts, primarily targetted at set-top-box + and other digital audio/video applications using Flattened Device + Trees. + +endif diff --git a/arch/arm/mach-sti/Makefile b/arch/arm/mach-sti/Makefile new file mode 100644 index 000000000000..acb330916333 --- /dev/null +++ b/arch/arm/mach-sti/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_SMP) += platsmp.o headsmp.o +obj-$(CONFIG_ARCH_STI) += board-dt.o diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c new file mode 100644 index 000000000000..8fe6f0c46480 --- /dev/null +++ b/arch/arm/mach-sti/board-dt.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * Author(s): Srinivas Kandagatla <srinivas.kandagatla@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk-provider.h> +#include <linux/clocksource.h> +#include <linux/irq.h> +#include <asm/hardware/cache-l2x0.h> +#include <asm/mach/arch.h> + +#include "smp.h" + +void __init stih41x_l2x0_init(void) +{ + u32 way_size = 0x4; + u32 aux_ctrl; + /* may be this can be encoded in macros like BIT*() */ + aux_ctrl = (0x1 << L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT) | + (0x1 << L2X0_AUX_CTRL_DATA_PREFETCH_SHIFT) | + (0x1 << L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT) | + (way_size << L2X0_AUX_CTRL_WAY_SIZE_SHIFT); + + l2x0_of_init(aux_ctrl, L2X0_AUX_CTRL_MASK); +} + +static void __init stih41x_timer_init(void) +{ + of_clk_init(NULL); + clocksource_of_init(); + stih41x_l2x0_init(); +} + +static const char *stih41x_dt_match[] __initdata = { + "st,stih415", + "st,stih416", + NULL +}; + +DT_MACHINE_START(STM, "STiH415/416 SoC with Flattened Device Tree") + .init_time = stih41x_timer_init, + .smp = smp_ops(sti_smp_ops), + .dt_compat = stih41x_dt_match, +MACHINE_END diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S new file mode 100644 index 000000000000..78ebc7559f53 --- /dev/null +++ b/arch/arm/mach-sti/headsmp.S @@ -0,0 +1,44 @@ +/* + * arch/arm/mach-sti/headsmp.S + * + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * http://www.st.com + * + * Cloned from linux/arch/arm/mach-vexpress/headsmp.S + * + * Copyright (c) 2003 ARM Limited + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/linkage.h> +#include <linux/init.h> + + __INIT + +/* + * ST specific entry point for secondary CPUs. This provides + * a "holding pen" into which all secondary cores are held until we're + * ready for them to initialise. + */ +ENTRY(sti_secondary_startup) + mrc p15, 0, r0, c0, c0, 5 + and r0, r0, #15 + adr r4, 1f + ldmia r4, {r5, r6} + sub r4, r4, r5 + add r6, r6, r4 +pen: ldr r7, [r6] + cmp r7, r0 + bne pen + + /* + * we've been released from the holding pen: secondary_stack + * should now contain the SVC stack for this core + */ + b secondary_startup + +1: .long . + .long pen_release diff --git a/arch/arm/mach-sti/platsmp.c b/arch/arm/mach-sti/platsmp.c new file mode 100644 index 000000000000..977a863468fc --- /dev/null +++ b/arch/arm/mach-sti/platsmp.c @@ -0,0 +1,117 @@ +/* + * arch/arm/mach-sti/platsmp.c + * + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * http://www.st.com + * + * Cloned from linux/arch/arm/mach-vexpress/platsmp.c + * + * Copyright (C) 2002 ARM Ltd. + * All Rights Reserved + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/smp.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include <asm/cacheflush.h> +#include <asm/smp_plat.h> +#include <asm/smp_scu.h> + +#include "smp.h" + +static void __cpuinit write_pen_release(int val) +{ + pen_release = val; + smp_wmb(); + __cpuc_flush_dcache_area((void *)&pen_release, sizeof(pen_release)); + outer_clean_range(__pa(&pen_release), __pa(&pen_release + 1)); +} + +static DEFINE_SPINLOCK(boot_lock); + +void __cpuinit sti_secondary_init(unsigned int cpu) +{ + trace_hardirqs_off(); + + /* + * let the primary processor know we're out of the + * pen, then head off into the C entry point + */ + write_pen_release(-1); + + /* + * Synchronise with the boot thread. + */ + spin_lock(&boot_lock); + spin_unlock(&boot_lock); +} + +int __cpuinit sti_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + unsigned long timeout; + + /* + * set synchronisation state between this boot processor + * and the secondary one + */ + spin_lock(&boot_lock); + + /* + * The secondary processor is waiting to be released from + * the holding pen - release it, then wait for it to flag + * that it has been released by resetting pen_release. + * + * Note that "pen_release" is the hardware CPU ID, whereas + * "cpu" is Linux's internal ID. + */ + write_pen_release(cpu_logical_map(cpu)); + + /* + * Send the secondary CPU a soft interrupt, thereby causing + * it to jump to the secondary entrypoint. + */ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + timeout = jiffies + (1 * HZ); + while (time_before(jiffies, timeout)) { + smp_rmb(); + if (pen_release == -1) + break; + + udelay(10); + } + + /* + * now the secondary core is starting up let it run its + * calibrations, then wait for it to finish + */ + spin_unlock(&boot_lock); + + return pen_release != -1 ? -ENOSYS : 0; +} + +void __init sti_smp_prepare_cpus(unsigned int max_cpus) +{ + void __iomem *scu_base = NULL; + struct device_node *np = of_find_compatible_node( + NULL, NULL, "arm,cortex-a9-scu"); + if (np) { + scu_base = of_iomap(np, 0); + scu_enable(scu_base); + of_node_put(np); + } +} + +struct smp_operations __initdata sti_smp_ops = { + .smp_prepare_cpus = sti_smp_prepare_cpus, + .smp_secondary_init = sti_secondary_init, + .smp_boot_secondary = sti_boot_secondary, +}; diff --git a/arch/arm/mach-sti/smp.h b/arch/arm/mach-sti/smp.h new file mode 100644 index 000000000000..1871b72b1a7e --- /dev/null +++ b/arch/arm/mach-sti/smp.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-sti/smp.h + * + * Copyright (C) 2013 STMicroelectronics (R&D) Limited. + * http://www.st.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __MACH_STI_SMP_H +#define __MACH_STI_SMP_H + +extern struct smp_operations sti_smp_ops; + +#endif diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index f58615b5c601..82ccf1d98735 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -42,7 +42,8 @@ static int __init ux500_l2x0_init(void) if (cpu_is_u8500_family() || cpu_is_ux540_family()) l2x0_base = __io_address(U8500_L2CC_BASE); else - ux500_unknown_soc(); + /* Non-Ux500 platform */ + return -ENODEV; /* Unlock before init */ ux500_l2x0_unlock(); diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 989fefe18be6..4fb1f03a10d1 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -46,6 +46,7 @@ extern unsigned long samsung_cpu_id; #define EXYNOS4_CPU_MASK 0xFFFE0000 #define EXYNOS5250_SOC_ID 0x43520000 +#define EXYNOS5420_SOC_ID 0xE5420000 #define EXYNOS5440_SOC_ID 0xE5440000 #define EXYNOS5_SOC_MASK 0xFFFFF000 @@ -67,6 +68,7 @@ IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK) IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK) +IS_SAMSUNG_CPU(exynos5420, EXYNOS5420_SOC_ID, EXYNOS5_SOC_MASK) IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \ @@ -142,6 +144,12 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK) # define soc_is_exynos5250() 0 #endif +#if defined(CONFIG_SOC_EXYNOS5420) +# define soc_is_exynos5420() is_samsung_exynos5420() +#else +# define soc_is_exynos5420() 0 +#endif + #if defined(CONFIG_SOC_EXYNOS5440) # define soc_is_exynos5440() is_samsung_exynos5440() #else |