Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late DT updates from Arnd Bergmann:
 "These updates have been kept in a separate branch mostly because they
  rely on updates to the respective clk drivers to keep the shared
  header files in sync.

  This includes two branches for arm64 dt updates, both following up on
  earlier changes for the same platforms that are already merged:

  Samsung:
   - add USB3 support in Exynos7
   - minor PM related updates

  Amlogic:
   - new machines: WeTek Set-top-boxes
   - various devices added to DT

  There are also a couple of bugfixes that trickled in since the start
  of the merge window:

   - The moxart_defconfig was not building the intended platform
   - CPU-hotplug was broken on ux500
   - Coresight was broken on Juno (never worked)"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  ARM: deconfig: fix the moxart defconfig
  ARM: ux500: resume the second core properly
  arm64: dts: juno: update definition for programmable replicator
  arm64: dts: exynos: Add regulators for Vbus and Vbus-Boost
  arm64: dts: exynos: Add USB 3.0 controller node for Exynos7
  arm64: dts: exynos: Use macros for pinctrl configuration on Exynos7
  pinctrl: dt-bindings: samsung: Add Exynos7 specific pinctrl macro definitions
  arm64: dts: exynos: Add initial configuration for DISP clocks for TM2/TM2e
  ARM64: dts: meson-gxbb-p200: add ADC laddered keys
  ARM64: dts: meson: meson-gx: add the SAR ADC
  ARM64: dts: meson-gxl: add the pwm_ao_b pin
  ARM64: dts: meson-gx: add the missing pwm_AO_ab node
  clk: gxbb: fix CLKID_ETH defined twice
  ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
  clk: gxbb: add the SAR ADC clocks and expose them
  dt-bindings: amlogic: Add WeTek boards
  ARM64: dts: meson-gxbb: Add support for WeTek Hub and Play
  dt-bindings: vendor-prefix: Add wetek vendor prefix
  ARM64: dts: meson-gxm: Rename q200 and q201 DT files for consistency
  ARM64: dts: meson-gx: Add HDMI HPD/DDC pinctrl nodes
  ...

25 files changed, 778 insertions, 296 deletions

diff --git a/arch/arm/configs/moxart_defconfig b/arch/arm/configs/moxart_defconfig
index a3cb76cfb828..b2ddd534867f 100644
--- a/arch/arm/configs/moxart_defconfig
+++ b/arch/arm/configs/moxart_defconfig
@@ -18,9 +18,8 @@ CONFIG_EMBEDDED=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V4=y
 # CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_KEYBOARD_GPIO_POLLED=y
 CONFIG_ARCH_MOXART=y
 CONFIG_MACH_UC7112LX=y
 CONFIG_PREEMPT=y
@@ -94,12 +93,10 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
-CONFIG_DEBUG_GPIO=y
-CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_MOXART=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_CORE=y
@@ -107,10 +104,13 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_MOXART_WDT=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
-CONFIG_MMC_SDHCI_MOXART=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_MOXART=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_ONESHOT=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index c2499bff4986..a9a3453548f4 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -5,7 +5,4 @@
 obj-y				:= pm.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o
 obj-$(CONFIG_SMP)		+= platsmp.o
-obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
-
-CFLAGS_hotplug.o		+= -march=armv7-a
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 24529cf58df6..28083ef72819 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -31,8 +31,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
 
-#include "setup.h"
-
 #include "db8500-regs.h"
 
 static int __init ux500_l2x0_unlock(void)
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
deleted file mode 100644
index 1cbed0331fd3..000000000000
--- a/arch/arm/mach-ux500/hotplug.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *	Based on ARM realview platform
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- *
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "setup.h"
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void ux500_cpu_die(unsigned int cpu)
-{
-	/* directly enter low power state, skipping secure registers */
-	for (;;) {
-		__asm__ __volatile__("dsb\n\t" "wfi\n\t"
-				: : : "memory");
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-	}
-}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 9b124c22035f..69c2361ca688 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -23,8 +23,6 @@
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
-#include "setup.h"
-
 #include "db8500-regs.h"
 
 /* Magic triggers in backup RAM */
@@ -90,6 +88,13 @@ static int ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+void ux500_cpu_die(unsigned int cpu)
+{
+	wfi();
+}
+#endif
+
 static const struct smp_operations ux500_smp_ops __initconst = {
 	.smp_prepare_cpus	= ux500_smp_prepare_cpus,
 	.smp_boot_secondary	= ux500_boot_secondary,
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
deleted file mode 100644
index 988e7c77068d..000000000000
--- a/arch/arm/mach-ux500/setup.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These symbols are needed for board-specific files to call their
- * own cpu-specific files
- */
-#ifndef __ASM_ARCH_SETUP_H
-#define __ASM_ARCH_SETUP_H
-
-extern void ux500_cpu_die(unsigned int cpu);
-
-#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 0d7bfbf7d922..3f94bce33b7f 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -5,12 +5,14 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-pro.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-nexbox-a95x.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q200.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-s912-q201.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 
 always		:= $(dtb-y)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 0cbe24b49710..5d995f7724af 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -83,6 +83,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu1: cpu@1 {
@@ -91,6 +92,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu2: cpu@2 {
@@ -99,6 +101,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		cpu3: cpu@3 {
@@ -107,6 +110,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 0>;
 		};
 
 		l2: l2-cache0 {
@@ -171,6 +175,28 @@
 		};
 	};
 
+	scpi {
+		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
+		mboxes = <&mailbox 1 &mailbox 2>;
+		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+		scpi_clocks: clocks {
+			compatible = "arm,scpi-clocks";
+
+			scpi_dvfs: scpi_clocks@0 {
+				compatible = "arm,scpi-dvfs-clocks";
+				#clock-cells = <1>;
+				clock-indices = <0>;
+				clock-output-names = "vcpu";
+			};
+		};
+
+		scpi_sensors: sensors {
+			compatible = "arm,scpi-sensors";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -229,6 +255,14 @@
 				status = "disabled";
 			};
 
+			saradc: adc@8680 {
+				compatible = "amlogic,meson-saradc";
+				reg = <0x0 0x8680 0x0 0x34>;
+				#io-channel-cells = <1>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			pwm_ef: pwm@86c0 {
 				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
 				reg = <0x0 0x086c0 0x0 0x10>;
@@ -282,6 +316,25 @@
 			#address-cells = <0>;
 		};
 
+		sram: sram@c8000000 {
+			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+			reg = <0x0 0xc8000000 0x0 0x14000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x0 0xc8000000 0x14000>;
+
+			cpu_scp_lpri: scp-shmem@0 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13000 0x400>;
+			};
+
+			cpu_scp_hpri: scp-shmem@200 {
+				compatible = "amlogic,meson-gxbb-scp-shmem";
+				reg = <0x13400 0x400>;
+			};
+		};
+
 		aobus: aobus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xc8100000 0x0 0x100000>;
@@ -297,6 +350,21 @@
 				status = "disabled";
 			};
 
+			uart_AO_B: serial@4e0 {
+				compatible = "amlogic,meson-uart";
+				reg = <0x0 0x004e0 0x0 0x14>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>;
+				status = "disabled";
+			};
+
+			pwm_AO_ab: pwm@550 {
+				compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+				reg = <0x0 0x00550 0x0 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			ir: ir@580 {
 				compatible = "amlogic,meson-gxbb-ir";
 				reg = <0x0 0x00580 0x0 0x40>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 03e3d76626dd..fc0e86cb4cde 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -45,10 +45,55 @@
 /dts-v1/;
 
 #include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible = "amlogic,p200", "amlogic,meson-gxbb";
 	model = "Amlogic Meson GXBB P200 Development Board";
+
+	avdd18_usb_adc: regulator-avdd18_usb_adc {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD18_USB_ADC";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	adc_keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <900000>; /* 50% */
+		};
+
+		button-esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <684000>; /* 38% */
+		};
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <468000>; /* 26% */
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <252000>; /* 14% */
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <0>; /* 0% */
+		};
+	};
 };
 
 &i2c_B {
@@ -56,3 +101,8 @@
 	pinctrl-0 = <&i2c_b_pins>;
 	pinctrl-names = "default";
 };
+
+&saradc {
+	status = "okay";
+	vref-supply = <&avdd18_usb_adc>;
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index e59ad308192f..86709929fd20 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -53,6 +53,17 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "vega-s95:blue:on";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
 	usb_vbus: regulator-usb0-vbus {
 		compatible = "regulator-fixed";
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
new file mode 100644
index 000000000000..56f855901262
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts
@@ -0,0 +1,66 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+
+/ {
+	compatible = "wetek,hub", "amlogic,meson-gxbb";
+	model = "WeTek Hub";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	cvbs-connector {
+		status = "disabled";
+	};
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
new file mode 100644
index 000000000000..ea79fdd2c248
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb-p20x.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "wetek,play2", "amlogic,meson-gxbb";
+	model = "WeTek Play 2";
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "wetek-play:system-status";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+
+		wifi {
+			label = "wetek-play:wifi-status";
+			gpios = <&gpio GPIODV_26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		ethernet {
+			label = "wetek-play:ethernet-status";
+			gpios = <&gpio GPIODV_27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+
+		button@0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index b35307321b63..04b3324bc132 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -50,28 +50,6 @@
 / {
 	compatible = "amlogic,meson-gxbb";
 
-	scpi {
-		compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
-		mboxes = <&mailbox 1 &mailbox 2>;
-		shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
-
-		scpi_clocks: clocks {
-			compatible = "arm,scpi-clocks";
-
-			scpi_dvfs: scpi_clocks@0 {
-				compatible = "arm,scpi-dvfs-clocks";
-				#clock-cells = <1>;
-				clock-indices = <0>;
-				clock-output-names = "vcpu";
-			};
-		};
-
-		scpi_sensors: sensors {
-			compatible = "arm,scpi-sensors";
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
 	soc {
 		usb0_phy: phy@c0000000 {
 			compatible = "amlogic,meson-gxbb-usb2-phy";
@@ -93,25 +71,6 @@
 			status = "disabled";
 		};
 
-		sram: sram@c8000000 {
-			compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
-			reg = <0x0 0xc8000000 0x0 0x14000>;
-
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x0 0xc8000000 0x14000>;
-
-			cpu_scp_lpri: scp-shmem@0 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13000 0x400>;
-			};
-
-			cpu_scp_hpri: scp-shmem@200 {
-				compatible = "amlogic,meson-gxbb-scp-shmem";
-				reg = <0x13400 0x400>;
-			};
-		};
-
 		usb0: usb@c9000000 {
 			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
 			reg = <0x0 0xc9000000 0x0 0x40000>;
@@ -138,22 +97,6 @@
 	};
 };
 
-&cpu0 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu1 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu2 {
-	clocks = <&scpi_dvfs 0>;
-};
-
-&cpu3 {
-	clocks = <&scpi_dvfs 0>;
-};
-
 &cbus {
 	spifc: spi@8c80 {
 		compatible = "amlogic,meson-gxbb-spifc";
@@ -195,6 +138,29 @@
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
@@ -340,6 +306,14 @@
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -348,6 +322,14 @@
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -356,6 +338,14 @@
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
@@ -463,6 +453,20 @@
 				function = "pwm_f_y";
 			};
 		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
 	};
 };
 
@@ -486,6 +490,16 @@
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SANA>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
 		 <&xtal>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
index cea4a3eded9b..cea4a3eded9b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 69216246275d..fe11b5fc61f7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -88,12 +88,42 @@
 			};
 		};
 
+		uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
+			mux {
+				groups = "uart_cts_ao_a",
+				       "uart_rts_ao_a";
+				function = "uart_ao";
+			};
+		};
+
+		uart_ao_b_pins: uart_ao_b {
+			mux {
+				groups = "uart_tx_ao_b", "uart_rx_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
+		uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
+			mux {
+				groups = "uart_cts_ao_b",
+				       "uart_rts_ao_b";
+				function = "uart_ao_b";
+			};
+		};
+
 		remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
 				function = "remote_input_ao";
 			};
 		};
+
+		pwm_ao_b_pins: pwm_ao_b {
+			mux {
+				groups = "pwm_ao_b";
+				function = "pwm_ao_b";
+			};
+		};
 	};
 };
 
@@ -163,6 +193,14 @@
 			};
 		};
 
+		uart_a_cts_rts_pins: uart_a_cts_rts {
+			mux {
+				groups = "uart_cts_a",
+				       "uart_rts_a";
+				function = "uart_a";
+			};
+		};
+
 		uart_b_pins: uart_b {
 			mux {
 				groups = "uart_tx_b",
@@ -171,6 +209,14 @@
 			};
 		};
 
+		uart_b_cts_rts_pins: uart_b_cts_rts {
+			mux {
+				groups = "uart_cts_b",
+				       "uart_rts_b";
+				function = "uart_b";
+			};
+		};
+
 		uart_c_pins: uart_c {
 			mux {
 				groups = "uart_tx_c",
@@ -179,6 +225,14 @@
 			};
 		};
 
+		uart_c_cts_rts_pins: uart_c_cts_rts {
+			mux {
+				groups = "uart_cts_c",
+				       "uart_rts_c";
+				function = "uart_c";
+			};
+		};
+
 		i2c_a_pins: i2c_a {
 			mux {
 				groups = "i2c_sck_a",
@@ -229,6 +283,20 @@
 				function = "pwm_e";
 			};
 		};
+
+		hdmi_hpd_pins: hdmi_hpd {
+			mux {
+				groups = "hdmi_hpd";
+				function = "hdmi_hpd";
+			};
+		};
+
+		hdmi_i2c_pins: hdmi_i2c {
+			mux {
+				groups = "hdmi_sda", "hdmi_scl";
+				function = "hdmi_i2c";
+			};
+		};
 	};
 
 	eth-phy-mux {
@@ -279,6 +347,16 @@
 	clocks = <&clkc CLKID_I2C>;
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_SAR_ADC>,
+		 <&clkc CLKID_SANA>,
+		 <&clkc CLKID_SAR_ADC_CLK>,
+		 <&clkc CLKID_SAR_ADC_SEL>;
+	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
+};
+
 &sd_emmc_a {
 	clocks = <&clkc CLKID_SD_EMMC_A>,
 		 <&xtal>,
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index 5dbc66088355..5dbc66088355 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
index 95e11d7faab8..95e11d7faab8 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-s912-q201.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index eb2f0c3e5e53..ddea7305c644 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -85,6 +85,7 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu5: cpu@101 {
@@ -93,6 +94,7 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu6: cpu@102 {
@@ -101,6 +103,7 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 
 		cpu7: cpu@103 {
@@ -109,10 +112,21 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			next-level-cache = <&l2>;
+			clocks = <&scpi_dvfs 1>;
 		};
 	};
 };
 
+&saradc {
+	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
+};
+
+&scpi_dvfs {
+	clock-indices = <0 1>;
+	clock-output-names = "vbig", "vlittle";
+};
+
 &vpu {
 	compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
 };
+
diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
index 9d799d938d2f..df539e865b90 100644
--- a/arch/arm64/boot/dts/arm/juno-base.dtsi
+++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
@@ -372,12 +372,13 @@
 		};
 	};
 
-	coresight-replicator {
-		/*
-		 * Non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell".
-		 */
-		compatible = "arm,coresight-replicator";
+	replicator@20120000 {
+		compatible = "qcom,coresight-replicator1x", "arm,primecell";
+		reg = <0 0x20120000 0 0x1000>;
+
+		clocks = <&soc_smc50mhz>;
+		clock-names = "apb_pclk";
+		power-domains = <&scpi_devpd 0>;
 
 		ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 53fd0683d400..098ad557fee3 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -217,18 +217,6 @@
 	assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>;
 };
 
-&cmu_disp {
-	assigned-clocks = <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
-			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
-			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
-			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
-	assigned-clock-parents = <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
-				 <0>,
-				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
-	assigned-clock-rates = <0>, <400000000>;
-};
-
 &cmu_fsys {
 	assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>,
 		<&cmu_top CLK_MOUT_SCLK_USBHOST30>,
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
index ddba2f889326..dea0a6f5bc18 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
@@ -18,6 +18,40 @@
 	compatible = "samsung,tm2", "samsung,exynos5433";
 };
 
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+	assigned-clock-rates = <250000000>, <400000000>;
+};
+
 &hsi2c_9 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 2fbf3a860316..7891a31adc17 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -18,6 +18,40 @@
 	compatible = "samsung,tm2e", "samsung,exynos5433";
 };
 
+&cmu_disp {
+	/*
+	 * TM2 and TM2e differ only by DISP_PLL rate, but define all assigned
+	 * clocks properties for DISP CMU for each board to keep them together
+	 * for easier review and maintenance.
+	 */
+	assigned-clocks = <&cmu_disp CLK_FOUT_DISP_PLL>,
+			  <&cmu_mif CLK_DIV_SCLK_DECON_TV_ECLK>,
+			  <&cmu_disp CLK_MOUT_ACLK_DISP_333_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DSIM0>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_RXCLKESC0_USER>,
+			  <&cmu_disp CLK_MOUT_PHYCLK_MIPIDPHY0_BITCLKDIV8_USER>,
+			  <&cmu_disp CLK_MOUT_DISP_PLL>,
+			  <&cmu_mif CLK_MOUT_SCLK_DECON_TV_ECLK_A>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>,
+			  <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK>;
+	assigned-clock-parents = <0>, <0>,
+				 <&cmu_mif CLK_ACLK_DISP_333>,
+				 <&cmu_mif CLK_SCLK_DSIM0_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DSIM0_USER>,
+				 <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_ECLK_USER>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_RXCLKESC0_PHY>,
+				 <&cmu_disp CLK_PHYCLK_MIPIDPHY0_BITCLKDIV8_PHY>,
+				 <&cmu_disp CLK_FOUT_DISP_PLL>,
+				 <&cmu_mif CLK_MOUT_BUS_PLL_DIV2>,
+				 <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
+				 <&cmu_disp CLK_MOUT_SCLK_DECON_TV_ECLK_USER>;
+	assigned-clock-rates = <278000000>, <400000000>;
+};
+
 &ldo31_reg {
 	regulator-name = "TSP_VDD_1.8V_AP";
 	regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
index c528dd52ba2d..e5892bb0ae6e 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
+++ b/arch/arm64/boot/dts/exynos/exynos7-espresso.dts
@@ -13,6 +13,7 @@
 #include "exynos7.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Exynos7 Espresso board based on EXYNOS7";
@@ -32,6 +33,29 @@
 		device_type = "memory";
 		reg = <0x0 0x40000000 0x0 0xC0000000>;
 	};
+
+	usb30_vbus_reg: regulator-usb30 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gph1 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb30_vbus_en>;
+		enable-active-high;
+	};
+
+	usb3drd_boost_5v: regulator-usb3drd-boost {
+		compatible = "regulator-fixed";
+		regulator-name = "VUSB_VBUS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpf4 1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3drd_boost_en>;
+		enable-active-high;
+	};
+
 };
 
 &fin_pll {
@@ -328,8 +352,8 @@
 &pinctrl_alive {
 	pmic_irq: pmic-irq {
 		samsung,pins = "gpa0-2";
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 };
 
@@ -365,3 +389,24 @@
 	vqmmc-supply = <&ldo2_reg>;
 	disable-wp;
 };
+
+&pinctrl_bus1 {
+	usb30_vbus_en: usb30-vbus-en {
+		samsung,pins = "gph1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb3drd_boost_en: usb3drd-boost-en {
+		samsung,pins = "gpf4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb30_vbus_reg>;
+	vbus-boost-supply = <&usb3drd_boost_5v>;
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index 7ebb93927f13..8f58850cd28c 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -12,6 +12,8 @@
  * published by the Free Software Foundation.
 */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_alive {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -187,163 +189,163 @@
 
 	hs_i2c10_bus: hs-i2c10-bus {
 		samsung,pins = "gpb0-1", "gpb0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c11_bus: hs-i2c11-bus {
 		samsung,pins = "gpb0-3", "gpb0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c2_bus: hs-i2c2-bus {
 		samsung,pins = "gpd0-3", "gpd0-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_data: uart0-data {
 		samsung,pins = "gpd0-0", "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart0_fctl: uart0-fctl {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart2_data: uart2-data {
 		samsung,pins = "gpd1-4", "gpd1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c3_bus: hs-i2c3-bus {
 		samsung,pins = "gpd1-3", "gpd1-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_data: uart1-data {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart1_fctl: uart1-fctl {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c0_bus: hs-i2c0-bus {
 		samsung,pins = "gpd2-1", "gpd2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c1_bus: hs-i2c1-bus {
 		samsung,pins = "gpd2-3", "gpd2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c9_bus: hs-i2c9-bus {
 		samsung,pins = "gpd2-7", "gpd2-6";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm0_out: pwm0-out {
 		samsung,pins = "gpd2-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm1_out: pwm1-out {
 		samsung,pins = "gpd2-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm2_out: pwm2-out {
 		samsung,pins = "gpd2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	pwm3_out: pwm3-out {
 		samsung,pins = "gpd2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c8_bus: hs-i2c8-bus {
 		samsung,pins = "gpd5-3", "gpd5-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	uart3_data: uart3-data {
 		samsung,pins = "gpd5-0", "gpd5-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi2_bus: spi2-bus {
 		samsung,pins = "gpd5-0", "gpd5-1", "gpd5-2", "gpd5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi1_bus: spi1-bus {
 		samsung,pins = "gpd6-2", "gpd6-3", "gpd6-4", "gpd6-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	spi0_bus: spi0-bus {
 		samsung,pins = "gpd8-0", "gpd8-1", "gpd6-0", "gpd6-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c4_bus: hs-i2c4-bus {
 		samsung,pins = "gpg3-1", "gpg3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	hs_i2c5_bus: hs-i2c5-bus {
 		samsung,pins = "gpg3-3", "gpg3-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -358,9 +360,9 @@
 
 	hs_i2c6_bus: hs-i2c6-bus {
 		samsung,pins = "gpj0-1", "gpj0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -375,9 +377,9 @@
 
 	hs_i2c7_bus: hs-i2c7-bus {
 		samsung,pins = "gpj1-1", "gpj1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -392,9 +394,9 @@
 
 	spi3_bus: spi3-bus {
 		samsung,pins = "gpg4-0", "gpg4-1", "gpg4-2", "gpg4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -409,9 +411,9 @@
 
 	spi4_bus: spi4-bus {
 		samsung,pins = "gpv7-0", "gpv7-1", "gpv7-2", "gpv7-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
@@ -426,37 +428,37 @@
 
 	sd2_clk: sd2-clk {
 		samsung,pins = "gpr4-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cmd: sd2-cmd {
 		samsung,pins = "gpr4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_cd: sd2-cd {
 		samsung,pins = "gpr4-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus1: sd2-bus-width1 {
 		samsung,pins = "gpr4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
 	sd2_bus4: sd2-bus-width4 {
 		samsung,pins = "gpr4-4", "gpr4-5", "gpr4-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 };
 
@@ -495,107 +497,107 @@
 
 	sd0_clk: sd0-clk {
 		samsung,pins = "gpr0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_cmd: sd0-cmd {
 		samsung,pins = "gpr0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_ds: sd0-ds {
 		samsung,pins = "gpr0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_qrdy: sd0-qrdy {
 		samsung,pins = "gpr0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_bus1: sd0-bus-width1 {
 		samsung,pins = "gpr1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_bus4: sd0-bus-width4 {
 		samsung,pins = "gpr1-1", "gpr1-2", "gpr1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd0_bus8: sd0-bus-width8 {
 		samsung,pins = "gpr1-4", "gpr1-5", "gpr1-6", "gpr1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV2>;
 	};
 
 	sd1_clk: sd1-clk {
 		samsung,pins = "gpr2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_cmd: sd1-cmd {
 		samsung,pins = "gpr2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_ds: sd1-ds {
 		samsung,pins = "gpr2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <6>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
 	sd1_qrdy: sd1-qrdy {
 		samsung,pins = "gpr2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <6>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
 	sd1_int: sd1-int {
 		samsung,pins = "gpr2-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <6>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV4>;
 	};
 
 	sd1_bus1: sd1-bus-width1 {
 		samsung,pins = "gpr3-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_bus4: sd1-bus-width4 {
 		samsung,pins = "gpr3-1", "gpr3-2", "gpr3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 
 	sd1_bus8: sd1-bus-width8 {
 		samsung,pins = "gpr3-4", "gpr3-5", "gpr3-6", "gpr3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS7_FSYS1_PIN_DRV_LV3>;
 	};
 };
 
@@ -682,22 +684,22 @@
 
 	spi5_bus: spi5-bus {
 		samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
 	ufs_refclk_out: ufs-refclk-out {
 		samsung,pins = "gpg2-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
 	};
 
 	ufs_rst_n: ufs-rst-n {
 		samsung,pins = "gph1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 80aa60e38237..9a3fbed1765a 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -603,6 +603,40 @@
 				#include "exynos7-trip-points.dtsi"
 			};
 		};
+
+		usbdrd_phy: phy@15500000 {
+			compatible = "samsung,exynos7-usbdrd-phy";
+			reg = <0x15500000 0x100>;
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>,
+			       <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>,
+			       <&clock_fsys0 SCLK_USBDRD300_REFCLK>;
+			clock-names = "phy", "ref", "phy_pipe",
+				"phy_utmi", "itp";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3 {
+			compatible = "samsung,exynos7-dwusb3";
+			clocks = <&clock_fsys0 ACLK_USBDRD300>,
+			       <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>,
+			       <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>;
+			clock-names = "usbdrd30", "usbdrd30_susp_clk",
+				"usbdrd30_axius_clk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dwc3@15400000 {
+				compatible = "snps,dwc3";
+				reg = <0x15400000 0x10000>;
+				interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
+		};
 	};
 };