Merge tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Pull" ARM: at91: DT for 4.15" from Alexandre Belloni:

 - sama5d2 xplained: add charger and SD card power supply
 - sama5d27_som1_ek: many adjustments
 - at91sam9x25ek: add pwm0 and can1

* tag 'at91-ab-4.15-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: at91sam9x5ek: use DMA for USART0
  ARM: dts: at91: at91sam9x25ek: add pwm0
  ARM: dts: at91: at91sam9x25ek: add CAN1 interface
  ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines
  ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0
  ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source
  ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines
  ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0
  ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0
  ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c
  ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source
  ARM: dts: at91: sama5d27_som1_ek: update serial aliases
  ARM: dts: at91: sama5d27_som1_ek: enable i2c2
  ARM: dts: at91: sama5d27_som1_ek: add disabled status
  ARM: dts: at91: usb_a9g20: fix rtc node
  ARM: dts: at91: sama5d2 Xplained: Describe the SD card power supply
  ARM: dts: at91: sama5d2_xplained: Add charger node

5 files changed, 66 insertions, 37 deletions

diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index cfb1b6a23824..6d87b4eb6c41 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -53,6 +53,14 @@
 	model = "Atmel SAMA5D27 SOM1 EK";
 	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
 
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		serial1 = &uart4;	/* mikro BUS 1 */
+		serial2 = &uart2;	/* mikro BUS 2 */
+		i2c1	= &i2c1;
+		i2c2	= &i2c2;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -128,12 +136,14 @@
 			};
 
 			pwm0: pwm@f802c000 {
-				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+				status = "disabled"; /* Conflict with leds. */
 			};
 
 			flx1: flexcom@f8038000 {
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
-				status = "disabled";
+				status = "okay";
 
 				i2c2: i2c@600 {
 					compatible = "atmel,sama5d2-i2c";
@@ -147,7 +157,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
 					atmel,fifo-size = <16>;
-					status = "disabled";
+					status = "okay";
 				};
 			};
 
@@ -165,17 +175,12 @@
 				status = "okay";
 			};
 
-			can0: can@f8054000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_can0_default>;
-			};
-
 			uart3: serial@fc008000 {
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart3_default>;
-				status = "disabled";
+				status = "disabled"; /* Conflict with isc. */
 			};
 
 			uart4: serial@fc00c000 {
@@ -199,7 +204,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx3_default>;
 					atmel,fifo-size = <32>;
-					status = "disabled";
+					status = "disabled"; /* Conflict with isc. */
 				};
 
 				spi2: spi@400 {
@@ -211,7 +216,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx3_default>;
 					atmel,fifo-size = <16>;
-					status = "disabled";
+					status = "disabled"; /* Conflict with isc. */
 				};
 			};
 
@@ -228,7 +233,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
 					atmel,fifo-size = <32>;
-					status = "disabled";
+					status = "disabled"; /* Conflict with spi3 and i2c3. */
 				};
 
 				spi3: spi@400 {
@@ -240,7 +245,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
 					atmel,fifo-size = <16>;
-					status = "okay";
+					status = "okay"; /* Conflict with uart6 and i2c3. */
 				};
 
 				i2c3: i2c@600 {
@@ -255,7 +260,7 @@
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
 					atmel,fifo-size = <16>;
-					status = "disabled";
+					status = "disabled"; /* Conflict with uart6 and spi3. */
 				};
 			};
 
@@ -268,12 +273,6 @@
 
 			pinctrl@fc038000 {
 
-				pinctrl_can0_default: can0_default {
-					pinmux = <PIN_PC10__CANTX0>,
-						 <PIN_PC11__CANRX0>;
-					bias-disable;
-				};
-
 				pinctrl_can1_default: can1_default {
 					pinmux = <PIN_PC26__CANTX1>,
 						 <PIN_PC27__CANRX1>;
@@ -350,7 +349,7 @@
 							 <PIN_PA7__SDMMC0_DAT5>,
 							 <PIN_PA8__SDMMC0_DAT6>,
 							 <PIN_PA9__SDMMC0_DAT7>;
-						bias-pull-up;
+						bias-disable;
 					};
 
 					ck_cd_vddsel {
@@ -368,7 +367,7 @@
 							 <PIN_PA19__SDMMC1_DAT1>,
 							 <PIN_PA20__SDMMC1_DAT2>,
 							 <PIN_PA21__SDMMC1_DAT3>;
-						bias-pull-up;
+						bias-disable;
 					};
 
 					conf-ck_cd {
@@ -512,6 +511,7 @@
 			label = "USER";
 			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
+			wakeup-source;
 		};
 	};
 
@@ -519,7 +519,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay";
+		status = "okay"; /* Conflict with pwm0. */
 
 		red {
 			label = "red";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index b2b5a8534134..bb3fff4dbd24 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -103,6 +103,8 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc1_default>;
 			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
 		};
 
 		apb {
@@ -160,14 +162,6 @@
 					compatible = "active-semi,act8945a";
 					reg = <0x5b>;
 					active-semi,vsel-high;
-					active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
-					active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
-					active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
-					active-semi,input-voltage-threshold-microvolt = <6600>;
-					active-semi,precondition-timeout = <40>;
-					active-semi,total-timeout = <3>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
 					status = "okay";
 
 					regulators {
@@ -220,11 +214,28 @@
 							regulator-always-on;
 						};
 					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
 				};
 			};
 
 			pwm0: pwm@f802c000 {
-				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
 			};
 
 			flx0: flexcom@f8034000 {
@@ -435,7 +446,7 @@
 							 <PIN_PA7__SDMMC0_DAT5>,
 							 <PIN_PA8__SDMMC0_DAT6>,
 							 <PIN_PA9__SDMMC0_DAT7>;
-						bias-pull-up;
+						bias-disable;
 					};
 
 					ck_cd_rstn_vddsel {
@@ -454,7 +465,7 @@
 							 <PIN_PA19__SDMMC1_DAT1>,
 							 <PIN_PA20__SDMMC1_DAT2>,
 							 <PIN_PA21__SDMMC1_DAT3>;
-						bias-pull-up;
+						bias-disable;
 					};
 
 					conf-ck_cd {
@@ -494,6 +505,11 @@
 					bias-disable;
 				};
 
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
 			};
 
 			classd: classd@fc048000 {
@@ -522,6 +538,7 @@
 			label = "PB_USER";
 			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
+			wakeup-source;
 		};
 	};
 
@@ -529,7 +546,7 @@
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led_gpio_default>;
-		status = "okay";
+		status = "okay"; /* conflict with pwm0 */
 
 		red {
 			label = "red";
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 494864836e83..f705a3165656 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -16,6 +16,10 @@
 
 	ahb {
 		apb {
+			can1: can@f8004000 {
+				status = "okay";
+			};
+
 			macb0: ethernet@f802c000 {
 				phy-mode = "rmii";
 				status = "okay";
@@ -25,6 +29,12 @@
 				phy-mode = "rmii";
 				status = "okay";
 			};
+
+			pwm0: pwm@f8034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+				status = "okay";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index eb6dcc4c2bc3..4a2e13c8bf00 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -50,6 +50,8 @@
 			};
 
 			usart0: serial@f801c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/usb_a9g20_common.dtsi b/arch/arm/boot/dts/usb_a9g20_common.dtsi
index 088c2c3685ab..81c3fe0465d9 100644
--- a/arch/arm/boot/dts/usb_a9g20_common.dtsi
+++ b/arch/arm/boot/dts/usb_a9g20_common.dtsi
@@ -20,8 +20,8 @@
 	};
 
 	i2c-gpio-0 {
-		rv3029c2@56 {
-			compatible = "rv3029c2";
+		rtc@56 {
+			compatible = "microcrystal,rv3029";
 			reg = <0x56>;
 		};
 	};