diff options
| author | Tim Harvey <tharvey@gateworks.com> | 2017-04-10 23:58:10 +0300 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2017-05-15 04:34:28 +0300 |
| commit | 1b1ec50366a87ed84ac07db9a09c56ac7cafb367 (patch) | |
| tree | 32d3c67a477a53e6c265ba5fdf4ace840819f723 /arch | |
| parent | 2ea659a9ef488125eb46da6eb571de5eae5c43f6 (diff) | |
| download | linux-1b1ec50366a87ed84ac07db9a09c56ac7cafb367.tar.xz | |
ARM: dts: imx: ventana: fix DTC warnings
Remove the sky2 ethernet device node from the pcie controller which was
invalid to begin with.
The original intent was to allow the bootloader to populate the MAC via
dt but this requires the PCI bus topology to be complete in dt as well
and as these boards have an expansion connector that topology is dynamic
and can't be represented here.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/boot/dts/imx6q-gw5400-a.dts | 5 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 | ||||
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 |
3 files changed, 0 insertions, 15 deletions
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 8e84713f42c0..687ab911c13f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -19,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -347,10 +346,6 @@ &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &ssi1 { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a208e7e0dc6e..5bc6ed1a5b35 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -342,10 +341,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm2 { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 968fda94d14b..66fcf838e964 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -379,10 +378,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm1 { |