x86: make percpu symbols zerobased on SMP

[ Based on original patch from Christoph Lameter and Mike Travis. ]

This patch makes percpu symbols zerobased on x86_64 SMP by adding
PERCPU_VADDR() to vmlinux.lds.h which helps setting explicit vaddr on
the percpu output section and using it in vmlinux_64.lds.S.  A new
PHDR is added as existing ones cannot contain sections near address
zero.  PERCPU_VADDR() also adds a new symbol __per_cpu_load which
always points to the vaddr of the loaded percpu data.init region.

The following adjustments have been made to accomodate the address
change.

* code to locate percpu gdt_page in head_64.S is updated to add the
  load address to the gdt_page offset.

* __per_cpu_load is used in places where access to the init data area
  is necessary.

* pda->data_offset is initialized soon after C code is entered as zero
  value doesn't work anymore.

This patch is mostly taken from Mike Travis' "x86_64: Base percpu
variables at zero" patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

4 files changed, 42 insertions, 3 deletions

diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index b9a4d8c4b935..bc2900ca82c7 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -44,6 +44,8 @@ void __init x86_64_init_pda(void)
 {
 	_cpu_pda = __cpu_pda;
 	cpu_pda(0) = &_boot_cpu_pda;
+	cpu_pda(0)->data_offset =
+		(unsigned long)(__per_cpu_load - __per_cpu_start);
 	pda_init(0);
 }
 
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 0e275d495563..7ee0363871e8 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -204,6 +204,23 @@ ENTRY(secondary_startup_64)
 	pushq $0
 	popfq
 
+#ifdef CONFIG_SMP
+	/*
+	 * early_gdt_base should point to the gdt_page in static percpu init
+	 * data area.  Computing this requires two symbols - __per_cpu_load
+	 * and per_cpu__gdt_page.  As linker can't do no such relocation, do
+	 * it by hand.  As early_gdt_descr is manipulated by C code for
+	 * secondary CPUs, this should be done only once for the boot CPU
+	 * when early_gdt_descr_base contains zero.
+	 */
+	movq	early_gdt_descr_base(%rip), %rax
+	testq	%rax, %rax
+	jnz	1f
+	movq	$__per_cpu_load, %rax
+	addq	$per_cpu__gdt_page, %rax
+	movq	%rax, early_gdt_descr_base(%rip)
+1:
+#endif
 	/*
 	 * We must switch to a new descriptor in kernel space for the GDT
 	 * because soon the kernel won't have access anymore to the userspace
@@ -401,7 +418,12 @@ NEXT_PAGE(level2_spare_pgt)
 	.globl early_gdt_descr
 early_gdt_descr:
 	.word	GDT_ENTRIES*8-1
-	.quad   per_cpu__gdt_page
+#ifdef CONFIG_SMP
+early_gdt_descr_base:
+	.quad   0x0000000000000000
+#else
+	.quad	per_cpu__gdt_page
+#endif
 
 ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 56c63ac62b10..44845842e722 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -213,7 +213,7 @@ void __init setup_per_cpu_areas(void)
 		}
 #endif
 		per_cpu_offset(cpu) = ptr - __per_cpu_start;
-		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
+		memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start);
 
 		DBG("PERCPU: cpu %4d %p\n", cpu, ptr);
 	}
diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S
index 1a614c0e6bef..f50280db0dfe 100644
--- a/arch/x86/kernel/vmlinux_64.lds.S
+++ b/arch/x86/kernel/vmlinux_64.lds.S
@@ -19,6 +19,9 @@ PHDRS {
 	data PT_LOAD FLAGS(7);	/* RWE */
 	user PT_LOAD FLAGS(7);	/* RWE */
 	data.init PT_LOAD FLAGS(7);	/* RWE */
+#ifdef CONFIG_SMP
+	percpu PT_LOAD FLAGS(7);	/* RWE */
+#endif
 	note PT_NOTE FLAGS(0);	/* ___ */
 }
 SECTIONS
@@ -208,14 +211,26 @@ SECTIONS
   __initramfs_end = .;
 #endif
 
+#ifdef CONFIG_SMP
+  /*
+   * percpu offsets are zero-based on SMP.  PERCPU_VADDR() changes the
+   * output PHDR, so the next output section - __data_nosave - should
+   * switch it back to data.init.
+   */
+  . = ALIGN(PAGE_SIZE);
+  PERCPU_VADDR(0, :percpu)
+#else
   PERCPU(PAGE_SIZE)
+#endif
 
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
 
   . = ALIGN(PAGE_SIZE);
   __nosave_begin = .;
-  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
+  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+      *(.data.nosave)
+  } :data.init	/* switch back to data.init, see PERCPU_VADDR() above */
   . = ALIGN(PAGE_SIZE);
   __nosave_end = .;