Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel

1 files changed, 48 insertions, 65 deletions

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2a34f9c5be21..946a311a25c9 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -106,9 +106,11 @@
 #include <asm/percpu.h>
 #include <asm/topology.h>
 #include <asm/apicdef.h>
+#include <asm/k8.h>
 #ifdef CONFIG_X86_64
 #include <asm/numa_64.h>
 #endif
+#include <asm/mce.h>
 
 /*
  * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
@@ -247,7 +249,7 @@ EXPORT_SYMBOL(edd);
  *              from boot_params into a safe place.
  *
  */
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
 {
      memcpy(edd.mbr_signature, boot_params.edd_mbr_sig_buffer,
 	    sizeof(edd.mbr_signature));
@@ -256,7 +258,7 @@ static inline void copy_edd(void)
      edd.edd_info_nr = boot_params.eddbuf_entries;
 }
 #else
-static inline void copy_edd(void)
+static inline void __init copy_edd(void)
 {
 }
 #endif
@@ -486,42 +488,11 @@ static void __init reserve_early_setup_data(void)
 
 #ifdef CONFIG_KEXEC
 
-/**
- * Reserve @size bytes of crashkernel memory at any suitable offset.
- *
- * @size: Size of the crashkernel memory to reserve.
- * Returns the base address on success, and -1ULL on failure.
- */
-static
-unsigned long long __init find_and_reserve_crashkernel(unsigned long long size)
-{
-	const unsigned long long alignment = 16<<20; 	/* 16M */
-	unsigned long long start = 0LL;
-
-	while (1) {
-		int ret;
-
-		start = find_e820_area(start, ULONG_MAX, size, alignment);
-		if (start == -1ULL)
-			return start;
-
-		/* try to reserve it */
-		ret = reserve_bootmem_generic(start, size, BOOTMEM_EXCLUSIVE);
-		if (ret >= 0)
-			return start;
-
-		start += alignment;
-	}
-}
-
 static inline unsigned long long get_total_mem(void)
 {
 	unsigned long long total;
 
-	total = max_low_pfn - min_low_pfn;
-#ifdef CONFIG_HIGHMEM
-	total += highend_pfn - highstart_pfn;
-#endif
+	total = max_pfn - min_low_pfn;
 
 	return total << PAGE_SHIFT;
 }
@@ -541,21 +512,25 @@ static void __init reserve_crashkernel(void)
 
 	/* 0 means: find the address automatically */
 	if (crash_base <= 0) {
-		crash_base = find_and_reserve_crashkernel(crash_size);
+		const unsigned long long alignment = 16<<20;	/* 16M */
+
+		crash_base = find_e820_area(alignment, ULONG_MAX, crash_size,
+				 alignment);
 		if (crash_base == -1ULL) {
-			pr_info("crashkernel reservation failed. "
-				"No suitable area found.\n");
+			pr_info("crashkernel reservation failed - No suitable area found.\n");
 			return;
 		}
 	} else {
-		ret = reserve_bootmem_generic(crash_base, crash_size,
-					BOOTMEM_EXCLUSIVE);
-		if (ret < 0) {
-			pr_info("crashkernel reservation failed - "
-				"memory is in use\n");
+		unsigned long long start;
+
+		start = find_e820_area(crash_base, ULONG_MAX, crash_size,
+				 1<<20);
+		if (start != crash_base) {
+			pr_info("crashkernel reservation failed - memory is in use.\n");
 			return;
 		}
 	}
+	reserve_early(crash_base, crash_base + crash_size, "CRASH KERNEL");
 
 	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
 			"for crashkernel (System RAM: %ldMB)\n",
@@ -698,6 +673,9 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 
 void __init setup_arch(char **cmdline_p)
 {
+	int acpi = 0;
+	int k8 = 0;
+
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
@@ -790,21 +768,18 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
-#ifdef CONFIG_X86_64
 	/*
-	 * Must call this twice: Once just to detect whether hardware doesn't
-	 * support NX (so that the early EHCI debug console setup can safely
-	 * call set_fixmap(), and then again after parsing early parameters to
-	 * honor the respective command line option.
+	 * x86_configure_nx() is called before parse_early_param() to detect
+	 * whether hardware doesn't support NX (so that the early EHCI debug
+	 * console setup can safely call set_fixmap()). It may then be called
+	 * again from within noexec_setup() during parsing early parameters
+	 * to honor the respective command line option.
 	 */
-	check_efer();
-#endif
+	x86_configure_nx();
 
 	parse_early_param();
 
-#ifdef CONFIG_X86_64
-	check_efer();
-#endif
+	x86_report_nx();
 
 	/* Must be before kernel pagetables are setup */
 	vmi_activate();
@@ -900,6 +875,13 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_brk();
 
+#ifdef CONFIG_ACPI_SLEEP
+	/*
+	 * Reserve low memory region for sleep support.
+	 * even before init_memory_mapping
+	 */
+	acpi_reserve_wakeup_memory();
+#endif
 	init_gbpages();
 
 	/* max_pfn_mapped is updated here */
@@ -926,6 +908,8 @@ void __init setup_arch(char **cmdline_p)
 
 	reserve_initrd();
 
+	reserve_crashkernel();
+
 	vsmp_init();
 
 	io_delay_init();
@@ -937,27 +921,24 @@ void __init setup_arch(char **cmdline_p)
 
 	early_acpi_boot_init();
 
+	/*
+	 * Find and reserve possible boot-time SMP configuration:
+	 */
+	find_smp_config();
+
 #ifdef CONFIG_ACPI_NUMA
 	/*
 	 * Parse SRAT to discover nodes.
 	 */
-	acpi_numa_init();
+	acpi = acpi_numa_init();
 #endif
 
-	initmem_init(0, max_pfn);
-
-#ifdef CONFIG_ACPI_SLEEP
-	/*
-	 * Reserve low memory region for sleep support.
-	 */
-	acpi_reserve_bootmem();
+#ifdef CONFIG_K8_NUMA
+	if (!acpi)
+		k8 = !k8_numa_init(0, max_pfn);
 #endif
-	/*
-	 * Find and reserve possible boot-time SMP configuration:
-	 */
-	find_smp_config();
 
-	reserve_crashkernel();
+	initmem_init(0, max_pfn, acpi, k8);
 
 #ifdef CONFIG_X86_64
 	/*
@@ -1031,6 +1012,8 @@ void __init setup_arch(char **cmdline_p)
 #endif
 #endif
 	x86_init.oem.banner();
+
+	mcheck_init();
 }
 
 #ifdef CONFIG_X86_32