i386: move kernel

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

1 files changed, 1112 insertions, 0 deletions

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
new file mode 100644
index 000000000000..290b7bc82da3
--- /dev/null
+++ b/arch/x86/kernel/entry_32.S
@@ -0,0 +1,1112 @@
+/*
+ *  linux/arch/i386/entry.S
+ *
+ *  Copyright (C) 1991, 1992  Linus Torvalds
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all interrupts
+ * and faults that can result in a task-switch.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * I changed all the .align's to 4 (16 byte alignment), as that's faster
+ * on a 486.
+ *
+ * Stack layout in 'syscall_exit':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace.c and ptrace.h
+ *
+ *	 0(%esp) - %ebx
+ *	 4(%esp) - %ecx
+ *	 8(%esp) - %edx
+ *       C(%esp) - %esi
+ *	10(%esp) - %edi
+ *	14(%esp) - %ebp
+ *	18(%esp) - %eax
+ *	1C(%esp) - %ds
+ *	20(%esp) - %es
+ *	24(%esp) - %fs
+ *	28(%esp) - orig_eax
+ *	2C(%esp) - %eip
+ *	30(%esp) - %cs
+ *	34(%esp) - %eflags
+ *	38(%esp) - %oldesp
+ *	3C(%esp) - %oldss
+ *
+ * "current" is in register %ebx during any slow entries.
+ */
+
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/irqflags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/page.h>
+#include <asm/desc.h>
+#include <asm/percpu.h>
+#include <asm/dwarf2.h>
+#include "irq_vectors.h"
+
+/*
+ * We use macros for low-level operations which need to be overridden
+ * for paravirtualization.  The following will never clobber any registers:
+ *   INTERRUPT_RETURN (aka. "iret")
+ *   GET_CR0_INTO_EAX (aka. "movl %cr0, %eax")
+ *   ENABLE_INTERRUPTS_SYSEXIT (aka "sti; sysexit").
+ *
+ * For DISABLE_INTERRUPTS/ENABLE_INTERRUPTS (aka "cli"/"sti"), you must
+ * specify what registers can be overwritten (CLBR_NONE, CLBR_EAX/EDX/ECX/ANY).
+ * Allowing a register to be clobbered can shrink the paravirt replacement
+ * enough to patch inline, increasing performance.
+ */
+
+#define nr_syscalls ((syscall_table_size)/4)
+
+CF_MASK		= 0x00000001
+TF_MASK		= 0x00000100
+IF_MASK		= 0x00000200
+DF_MASK		= 0x00000400 
+NT_MASK		= 0x00004000
+VM_MASK		= 0x00020000
+
+#ifdef CONFIG_PREEMPT
+#define preempt_stop(clobbers)	DISABLE_INTERRUPTS(clobbers); TRACE_IRQS_OFF
+#else
+#define preempt_stop(clobbers)
+#define resume_kernel		restore_nocheck
+#endif
+
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+	testl $IF_MASK,PT_EFLAGS(%esp)     # interrupts off?
+	jz 1f
+	TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig	check_userspace
+#else
+#define resume_userspace_sig	resume_userspace
+#endif
+
+#define SAVE_ALL \
+	cld; \
+	pushl %fs; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	/*CFI_REL_OFFSET fs, 0;*/\
+	pushl %es; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	/*CFI_REL_OFFSET es, 0;*/\
+	pushl %ds; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	/*CFI_REL_OFFSET ds, 0;*/\
+	pushl %eax; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET eax, 0;\
+	pushl %ebp; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET ebp, 0;\
+	pushl %edi; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET edi, 0;\
+	pushl %esi; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET esi, 0;\
+	pushl %edx; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET edx, 0;\
+	pushl %ecx; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET ecx, 0;\
+	pushl %ebx; \
+	CFI_ADJUST_CFA_OFFSET 4;\
+	CFI_REL_OFFSET ebx, 0;\
+	movl $(__USER_DS), %edx; \
+	movl %edx, %ds; \
+	movl %edx, %es; \
+	movl $(__KERNEL_PERCPU), %edx; \
+	movl %edx, %fs
+
+#define RESTORE_INT_REGS \
+	popl %ebx;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE ebx;\
+	popl %ecx;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE ecx;\
+	popl %edx;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE edx;\
+	popl %esi;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE esi;\
+	popl %edi;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE edi;\
+	popl %ebp;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE ebp;\
+	popl %eax;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	CFI_RESTORE eax
+
+#define RESTORE_REGS	\
+	RESTORE_INT_REGS; \
+1:	popl %ds;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	/*CFI_RESTORE ds;*/\
+2:	popl %es;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	/*CFI_RESTORE es;*/\
+3:	popl %fs;	\
+	CFI_ADJUST_CFA_OFFSET -4;\
+	/*CFI_RESTORE fs;*/\
+.pushsection .fixup,"ax";	\
+4:	movl $0,(%esp);	\
+	jmp 1b;		\
+5:	movl $0,(%esp);	\
+	jmp 2b;		\
+6:	movl $0,(%esp);	\
+	jmp 3b;		\
+.section __ex_table,"a";\
+	.align 4;	\
+	.long 1b,4b;	\
+	.long 2b,5b;	\
+	.long 3b,6b;	\
+.popsection
+
+#define RING0_INT_FRAME \
+	CFI_STARTPROC simple;\
+	CFI_SIGNAL_FRAME;\
+	CFI_DEF_CFA esp, 3*4;\
+	/*CFI_OFFSET cs, -2*4;*/\
+	CFI_OFFSET eip, -3*4
+
+#define RING0_EC_FRAME \
+	CFI_STARTPROC simple;\
+	CFI_SIGNAL_FRAME;\
+	CFI_DEF_CFA esp, 4*4;\
+	/*CFI_OFFSET cs, -2*4;*/\
+	CFI_OFFSET eip, -3*4
+
+#define RING0_PTREGS_FRAME \
+	CFI_STARTPROC simple;\
+	CFI_SIGNAL_FRAME;\
+	CFI_DEF_CFA esp, PT_OLDESP-PT_EBX;\
+	/*CFI_OFFSET cs, PT_CS-PT_OLDESP;*/\
+	CFI_OFFSET eip, PT_EIP-PT_OLDESP;\
+	/*CFI_OFFSET es, PT_ES-PT_OLDESP;*/\
+	/*CFI_OFFSET ds, PT_DS-PT_OLDESP;*/\
+	CFI_OFFSET eax, PT_EAX-PT_OLDESP;\
+	CFI_OFFSET ebp, PT_EBP-PT_OLDESP;\
+	CFI_OFFSET edi, PT_EDI-PT_OLDESP;\
+	CFI_OFFSET esi, PT_ESI-PT_OLDESP;\
+	CFI_OFFSET edx, PT_EDX-PT_OLDESP;\
+	CFI_OFFSET ecx, PT_ECX-PT_OLDESP;\
+	CFI_OFFSET ebx, PT_EBX-PT_OLDESP
+
+ENTRY(ret_from_fork)
+	CFI_STARTPROC
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	call schedule_tail
+	GET_THREAD_INFO(%ebp)
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	pushl $0x0202			# Reset kernel eflags
+	CFI_ADJUST_CFA_OFFSET 4
+	popfl
+	CFI_ADJUST_CFA_OFFSET -4
+	jmp syscall_exit
+	CFI_ENDPROC
+END(ret_from_fork)
+
+/*
+ * Return to user mode is not as complex as all this looks,
+ * but we want the default path for a system call return to
+ * go as quickly as possible which is why some of this is
+ * less clear than it otherwise should be.
+ */
+
+	# userspace resumption stub bypassing syscall exit tracing
+	ALIGN
+	RING0_PTREGS_FRAME
+ret_from_exception:
+	preempt_stop(CLBR_ANY)
+ret_from_intr:
+	GET_THREAD_INFO(%ebp)
+check_userspace:
+	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS and CS
+	movb PT_CS(%esp), %al
+	andl $(VM_MASK | SEGMENT_RPL_MASK), %eax
+	cmpl $USER_RPL, %eax
+	jb resume_kernel		# not returning to v8086 or userspace
+
+ENTRY(resume_userspace)
+ 	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
+					# setting need_resched or sigpending
+					# between sampling and the iret
+	movl TI_flags(%ebp), %ecx
+	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done on
+					# int/exception return?
+	jne work_pending
+	jmp restore_all
+END(ret_from_exception)
+
+#ifdef CONFIG_PREEMPT
+ENTRY(resume_kernel)
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	cmpl $0,TI_preempt_count(%ebp)	# non-zero preempt_count ?
+	jnz restore_nocheck
+need_resched:
+	movl TI_flags(%ebp), %ecx	# need_resched set ?
+	testb $_TIF_NEED_RESCHED, %cl
+	jz restore_all
+	testl $IF_MASK,PT_EFLAGS(%esp)	# interrupts off (exception path) ?
+	jz restore_all
+	call preempt_schedule_irq
+	jmp need_resched
+END(resume_kernel)
+#endif
+	CFI_ENDPROC
+
+/* SYSENTER_RETURN points to after the "sysenter" instruction in
+   the vsyscall page.  See vsyscall-sysentry.S, which defines the symbol.  */
+
+	# sysenter call handler stub
+ENTRY(sysenter_entry)
+	CFI_STARTPROC simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA esp, 0
+	CFI_REGISTER esp, ebp
+	movl TSS_sysenter_esp0(%esp),%esp
+sysenter_past_esp:
+	/*
+	 * No need to follow this irqs on/off section: the syscall
+	 * disabled irqs and here we enable it straight after entry:
+	 */
+	ENABLE_INTERRUPTS(CLBR_NONE)
+	pushl $(__USER_DS)
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ss, 0*/
+	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esp, 0
+	pushfl
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $(__USER_CS)
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET cs, 0*/
+	/*
+	 * Push current_thread_info()->sysenter_return to the stack.
+	 * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
+	 * pushed above; +8 corresponds to copy_thread's esp0 setting.
+	 */
+	pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eip, 0
+
+/*
+ * Load the potential sixth argument from user stack.
+ * Careful about security.
+ */
+	cmpl $__PAGE_OFFSET-3,%ebp
+	jae syscall_fault
+1:	movl (%ebp),%ebp
+.section __ex_table,"a"
+	.align 4
+	.long 1b,syscall_fault
+.previous
+
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+
+	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	cmpl $(nr_syscalls), %eax
+	jae syscall_badsys
+	call *sys_call_table(,%eax,4)
+	movl %eax,PT_EAX(%esp)
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	testw $_TIF_ALLWORK_MASK, %cx
+	jne syscall_exit_work
+/* if something modifies registers it must also disable sysexit */
+	movl PT_EIP(%esp), %edx
+	movl PT_OLDESP(%esp), %ecx
+	xorl %ebp,%ebp
+	TRACE_IRQS_ON
+1:	mov  PT_FS(%esp), %fs
+	ENABLE_INTERRUPTS_SYSEXIT
+	CFI_ENDPROC
+.pushsection .fixup,"ax"
+2:	movl $0,PT_FS(%esp)
+	jmp 1b
+.section __ex_table,"a"
+	.align 4
+	.long 1b,2b
+.popsection
+ENDPROC(sysenter_entry)
+
+	# system call handler stub
+ENTRY(system_call)
+	RING0_INT_FRAME			# can't unwind into user space anyway
+	pushl %eax			# save orig_eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+					# system call tracing in operation / emulation
+	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
+	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	cmpl $(nr_syscalls), %eax
+	jae syscall_badsys
+syscall_call:
+	call *sys_call_table(,%eax,4)
+	movl %eax,PT_EAX(%esp)		# store the return value
+syscall_exit:
+	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
+					# setting need_resched or sigpending
+					# between sampling and the iret
+	TRACE_IRQS_OFF
+	testl $TF_MASK,PT_EFLAGS(%esp)	# If tracing set singlestep flag on exit
+	jz no_singlestep
+	orl $_TIF_SINGLESTEP,TI_flags(%ebp)
+no_singlestep:
+	movl TI_flags(%ebp), %ecx
+	testw $_TIF_ALLWORK_MASK, %cx	# current->work
+	jne syscall_exit_work
+
+restore_all:
+	movl PT_EFLAGS(%esp), %eax	# mix EFLAGS, SS and CS
+	# Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+	# are returning to the kernel.
+	# See comments in process.c:copy_thread() for details.
+	movb PT_OLDSS(%esp), %ah
+	movb PT_CS(%esp), %al
+	andl $(VM_MASK | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+	cmpl $((SEGMENT_LDT << 8) | USER_RPL), %eax
+	CFI_REMEMBER_STATE
+	je ldt_ss			# returning to user-space with LDT SS
+restore_nocheck:
+	TRACE_IRQS_IRET
+restore_nocheck_notrace:
+	RESTORE_REGS
+	addl $4, %esp			# skip orig_eax/error_code
+	CFI_ADJUST_CFA_OFFSET -4
+1:	INTERRUPT_RETURN
+.section .fixup,"ax"
+iret_exc:
+	pushl $0			# no error code
+	pushl $do_iret_error
+	jmp error_code
+.previous
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
+
+	CFI_RESTORE_STATE
+ldt_ss:
+	larl PT_OLDSS(%esp), %eax
+	jnz restore_nocheck
+	testl $0x00400000, %eax		# returning to 32bit stack?
+	jnz restore_nocheck		# allright, normal return
+
+#ifdef CONFIG_PARAVIRT
+	/*
+	 * The kernel can't run on a non-flat stack if paravirt mode
+	 * is active.  Rather than try to fixup the high bits of
+	 * ESP, bypass this code entirely.  This may break DOSemu
+	 * and/or Wine support in a paravirt VM, although the option
+	 * is still available to implement the setting of the high
+	 * 16-bits in the INTERRUPT_RETURN paravirt-op.
+	 */
+	cmpl $0, paravirt_ops+PARAVIRT_enabled
+	jne restore_nocheck
+#endif
+
+	/* If returning to userspace with 16bit stack,
+	 * try to fix the higher word of ESP, as the CPU
+	 * won't restore it.
+	 * This is an "official" bug of all the x86-compatible
+	 * CPUs, which we can try to work around to make
+	 * dosemu and wine happy. */
+	movl PT_OLDESP(%esp), %eax
+	movl %esp, %edx
+	call patch_espfix_desc
+	pushl $__ESPFIX_SS
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	DISABLE_INTERRUPTS(CLBR_EAX)
+	TRACE_IRQS_OFF
+	lss (%esp), %esp
+	CFI_ADJUST_CFA_OFFSET -8
+	jmp restore_nocheck
+	CFI_ENDPROC
+ENDPROC(system_call)
+
+	# perform work that needs to be done immediately before resumption
+	ALIGN
+	RING0_PTREGS_FRAME		# can't unwind into user space anyway
+work_pending:
+	testb $_TIF_NEED_RESCHED, %cl
+	jz work_notifysig
+work_resched:
+	call schedule
+	DISABLE_INTERRUPTS(CLBR_ANY)	# make sure we don't miss an interrupt
+					# setting need_resched or sigpending
+					# between sampling and the iret
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	andl $_TIF_WORK_MASK, %ecx	# is there any work to be done other
+					# than syscall tracing?
+	jz restore_all
+	testb $_TIF_NEED_RESCHED, %cl
+	jnz work_resched
+
+work_notifysig:				# deal with pending signals and
+					# notify-resume requests
+#ifdef CONFIG_VM86
+	testl $VM_MASK, PT_EFLAGS(%esp)
+	movl %esp, %eax
+	jne work_notifysig_v86		# returning to kernel-space or
+					# vm86-space
+	xorl %edx, %edx
+	call do_notify_resume
+	jmp resume_userspace_sig
+
+	ALIGN
+work_notifysig_v86:
+	pushl %ecx			# save ti_flags for do_notify_resume
+	CFI_ADJUST_CFA_OFFSET 4
+	call save_v86_state		# %eax contains pt_regs pointer
+	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
+	movl %eax, %esp
+#else
+	movl %esp, %eax
+#endif
+	xorl %edx, %edx
+	call do_notify_resume
+	jmp resume_userspace_sig
+END(work_pending)
+
+	# perform syscall exit tracing
+	ALIGN
+syscall_trace_entry:
+	movl $-ENOSYS,PT_EAX(%esp)
+	movl %esp, %eax
+	xorl %edx,%edx
+	call do_syscall_trace
+	cmpl $0, %eax
+	jne resume_userspace		# ret != 0 -> running under PTRACE_SYSEMU,
+					# so must skip actual syscall
+	movl PT_ORIG_EAX(%esp), %eax
+	cmpl $(nr_syscalls), %eax
+	jnae syscall_call
+	jmp syscall_exit
+END(syscall_trace_entry)
+
+	# perform syscall exit tracing
+	ALIGN
+syscall_exit_work:
+	testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+	jz work_pending
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)	# could let do_syscall_trace() call
+					# schedule() instead
+	movl %esp, %eax
+	movl $1, %edx
+	call do_syscall_trace
+	jmp resume_userspace
+END(syscall_exit_work)
+	CFI_ENDPROC
+
+	RING0_INT_FRAME			# can't unwind into user space anyway
+syscall_fault:
+	pushl %eax			# save orig_eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	GET_THREAD_INFO(%ebp)
+	movl $-EFAULT,PT_EAX(%esp)
+	jmp resume_userspace
+END(syscall_fault)
+
+syscall_badsys:
+	movl $-ENOSYS,PT_EAX(%esp)
+	jmp resume_userspace
+END(syscall_badsys)
+	CFI_ENDPROC
+
+#define FIXUP_ESPFIX_STACK \
+	/* since we are on a wrong stack, we cant make it a C code :( */ \
+	PER_CPU(gdt_page, %ebx); \
+	GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah); \
+	addl %esp, %eax; \
+	pushl $__KERNEL_DS; \
+	CFI_ADJUST_CFA_OFFSET 4; \
+	pushl %eax; \
+	CFI_ADJUST_CFA_OFFSET 4; \
+	lss (%esp), %esp; \
+	CFI_ADJUST_CFA_OFFSET -8;
+#define UNWIND_ESPFIX_STACK \
+	movl %ss, %eax; \
+	/* see if on espfix stack */ \
+	cmpw $__ESPFIX_SS, %ax; \
+	jne 27f; \
+	movl $__KERNEL_DS, %eax; \
+	movl %eax, %ds; \
+	movl %eax, %es; \
+	/* switch to normal stack */ \
+	FIXUP_ESPFIX_STACK; \
+27:;
+
+/*
+ * Build the entry stubs and pointer table with
+ * some assembler magic.
+ */
+.data
+ENTRY(interrupt)
+.text
+
+ENTRY(irq_entries_start)
+	RING0_INT_FRAME
+vector=0
+.rept NR_IRQS
+	ALIGN
+ .if vector
+	CFI_ADJUST_CFA_OFFSET -4
+ .endif
+1:	pushl $~(vector)
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp common_interrupt
+ .previous
+	.long 1b
+ .text
+vector=vector+1
+.endr
+END(irq_entries_start)
+
+.previous
+END(interrupt)
+.previous
+
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
+	ALIGN
+common_interrupt:
+	SAVE_ALL
+	TRACE_IRQS_OFF
+	movl %esp,%eax
+	call do_IRQ
+	jmp ret_from_intr
+ENDPROC(common_interrupt)
+	CFI_ENDPROC
+
+#define BUILD_INTERRUPT(name, nr)	\
+ENTRY(name)				\
+	RING0_INT_FRAME;		\
+	pushl $~(nr);			\
+	CFI_ADJUST_CFA_OFFSET 4;	\
+	SAVE_ALL;			\
+	TRACE_IRQS_OFF			\
+	movl %esp,%eax;			\
+	call smp_##name;		\
+	jmp ret_from_intr;		\
+	CFI_ENDPROC;			\
+ENDPROC(name)
+
+/* The include is where all of the SMP etc. interrupts come from */
+#include "entry_arch.h"
+
+KPROBE_ENTRY(page_fault)
+	RING0_EC_FRAME
+	pushl $do_page_fault
+	CFI_ADJUST_CFA_OFFSET 4
+	ALIGN
+error_code:
+	/* the function address is in %fs's slot on the stack */
+	pushl %es
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET es, 0*/
+	pushl %ds
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET ds, 0*/
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET eax, 0
+	pushl %ebp
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebp, 0
+	pushl %edi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edi, 0
+	pushl %esi
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET esi, 0
+	pushl %edx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET edx, 0
+	pushl %ecx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ecx, 0
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	CFI_REL_OFFSET ebx, 0
+	cld
+	pushl %fs
+	CFI_ADJUST_CFA_OFFSET 4
+	/*CFI_REL_OFFSET fs, 0*/
+	movl $(__KERNEL_PERCPU), %ecx
+	movl %ecx, %fs
+	UNWIND_ESPFIX_STACK
+	popl %ecx
+	CFI_ADJUST_CFA_OFFSET -4
+	/*CFI_REGISTER es, ecx*/
+	movl PT_FS(%esp), %edi		# get the function address
+	movl PT_ORIG_EAX(%esp), %edx	# get the error code
+	movl $-1, PT_ORIG_EAX(%esp)	# no syscall to restart
+	mov  %ecx, PT_FS(%esp)
+	/*CFI_REL_OFFSET fs, ES*/
+	movl $(__USER_DS), %ecx
+	movl %ecx, %ds
+	movl %ecx, %es
+	movl %esp,%eax			# pt_regs pointer
+	call *%edi
+	jmp ret_from_exception
+	CFI_ENDPROC
+KPROBE_END(page_fault)
+
+ENTRY(coprocessor_error)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_coprocessor_error
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(coprocessor_error)
+
+ENTRY(simd_coprocessor_error)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_simd_coprocessor_error
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(simd_coprocessor_error)
+
+ENTRY(device_not_available)
+	RING0_INT_FRAME
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	GET_CR0_INTO_EAX
+	testl $0x4, %eax		# EM (math emulation bit)
+	jne device_not_available_emulate
+	preempt_stop(CLBR_ANY)
+	call math_state_restore
+	jmp ret_from_exception
+device_not_available_emulate:
+	pushl $0			# temporary storage for ORIG_EIP
+	CFI_ADJUST_CFA_OFFSET 4
+	call math_emulate
+	addl $4, %esp
+	CFI_ADJUST_CFA_OFFSET -4
+	jmp ret_from_exception
+	CFI_ENDPROC
+END(device_not_available)
+
+/*
+ * Debug traps and NMI can happen at the one SYSENTER instruction
+ * that sets up the real kernel stack. Check here, since we can't
+ * allow the wrong stack to be used.
+ *
+ * "TSS_sysenter_esp0+12" is because the NMI/debug handler will have
+ * already pushed 3 words if it hits on the sysenter instruction:
+ * eflags, cs and eip.
+ *
+ * We just load the right stack, and push the three (known) values
+ * by hand onto the new stack - while updating the return eip past
+ * the instruction that would have done it for sysenter.
+ */
+#define FIX_STACK(offset, ok, label)		\
+	cmpw $__KERNEL_CS,4(%esp);		\
+	jne ok;					\
+label:						\
+	movl TSS_sysenter_esp0+offset(%esp),%esp;	\
+	CFI_DEF_CFA esp, 0;			\
+	CFI_UNDEFINED eip;			\
+	pushfl;					\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	pushl $__KERNEL_CS;			\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	pushl $sysenter_past_esp;		\
+	CFI_ADJUST_CFA_OFFSET 4;		\
+	CFI_REL_OFFSET eip, 0
+
+KPROBE_ENTRY(debug)
+	RING0_INT_FRAME
+	cmpl $sysenter_entry,(%esp)
+	jne debug_stack_correct
+	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
+debug_stack_correct:
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	xorl %edx,%edx			# error code 0
+	movl %esp,%eax			# pt_regs pointer
+	call do_debug
+	jmp ret_from_exception
+	CFI_ENDPROC
+KPROBE_END(debug)
+
+/*
+ * NMI is doubly nasty. It can happen _while_ we're handling
+ * a debug fault, and the debug fault hasn't yet been able to
+ * clear up the stack. So we first check whether we got  an
+ * NMI on the sysenter entry path, but after that we need to
+ * check whether we got an NMI on the debug path where the debug
+ * fault happened on the sysenter path.
+ */
+KPROBE_ENTRY(nmi)
+	RING0_INT_FRAME
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl %ss, %eax
+	cmpw $__ESPFIX_SS, %ax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	je nmi_espfix_stack
+	cmpl $sysenter_entry,(%esp)
+	je nmi_stack_fixup
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl %esp,%eax
+	/* Do not access memory above the end of our stack page,
+	 * it might not exist.
+	 */
+	andl $(THREAD_SIZE-1),%eax
+	cmpl $(THREAD_SIZE-20),%eax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	jae nmi_stack_correct
+	cmpl $sysenter_entry,12(%esp)
+	je nmi_debug_stack_check
+nmi_stack_correct:
+	/* We have a RING0_INT_FRAME here */
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_nmi
+	jmp restore_nocheck_notrace
+	CFI_ENDPROC
+
+nmi_stack_fixup:
+	RING0_INT_FRAME
+	FIX_STACK(12,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_debug_stack_check:
+	/* We have a RING0_INT_FRAME here */
+	cmpw $__KERNEL_CS,16(%esp)
+	jne nmi_stack_correct
+	cmpl $debug,(%esp)
+	jb nmi_stack_correct
+	cmpl $debug_esp_fix_insn,(%esp)
+	ja nmi_stack_correct
+	FIX_STACK(24,nmi_stack_correct, 1)
+	jmp nmi_stack_correct
+
+nmi_espfix_stack:
+	/* We have a RING0_INT_FRAME here.
+	 *
+	 * create the pointer to lss back
+	 */
+	pushl %ss
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl %esp
+	CFI_ADJUST_CFA_OFFSET 4
+	addw $4, (%esp)
+	/* copy the iret frame of 12 bytes */
+	.rept 3
+	pushl 16(%esp)
+	CFI_ADJUST_CFA_OFFSET 4
+	.endr
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	FIXUP_ESPFIX_STACK		# %eax == %esp
+	xorl %edx,%edx			# zero error code
+	call do_nmi
+	RESTORE_REGS
+	lss 12+4(%esp), %esp		# back to espfix stack
+	CFI_ADJUST_CFA_OFFSET -24
+1:	INTERRUPT_RETURN
+	CFI_ENDPROC
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
+KPROBE_END(nmi)
+
+#ifdef CONFIG_PARAVIRT
+ENTRY(native_iret)
+1:	iret
+.section __ex_table,"a"
+	.align 4
+	.long 1b,iret_exc
+.previous
+END(native_iret)
+
+ENTRY(native_irq_enable_sysexit)
+	sti
+	sysexit
+END(native_irq_enable_sysexit)
+#endif
+
+KPROBE_ENTRY(int3)
+	RING0_INT_FRAME
+	pushl $-1			# mark this as an int
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	xorl %edx,%edx		# zero error code
+	movl %esp,%eax		# pt_regs pointer
+	call do_int3
+	jmp ret_from_exception
+	CFI_ENDPROC
+KPROBE_END(int3)
+
+ENTRY(overflow)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_overflow
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(overflow)
+
+ENTRY(bounds)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_bounds
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(bounds)
+
+ENTRY(invalid_op)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_invalid_op
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(invalid_op)
+
+ENTRY(coprocessor_segment_overrun)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_coprocessor_segment_overrun
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(coprocessor_segment_overrun)
+
+ENTRY(invalid_TSS)
+	RING0_EC_FRAME
+	pushl $do_invalid_TSS
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(invalid_TSS)
+
+ENTRY(segment_not_present)
+	RING0_EC_FRAME
+	pushl $do_segment_not_present
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(segment_not_present)
+
+ENTRY(stack_segment)
+	RING0_EC_FRAME
+	pushl $do_stack_segment
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(stack_segment)
+
+KPROBE_ENTRY(general_protection)
+	RING0_EC_FRAME
+	pushl $do_general_protection
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+KPROBE_END(general_protection)
+
+ENTRY(alignment_check)
+	RING0_EC_FRAME
+	pushl $do_alignment_check
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(alignment_check)
+
+ENTRY(divide_error)
+	RING0_INT_FRAME
+	pushl $0			# no error code
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_divide_error
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(divide_error)
+
+#ifdef CONFIG_X86_MCE
+ENTRY(machine_check)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl machine_check_vector
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(machine_check)
+#endif
+
+ENTRY(spurious_interrupt_bug)
+	RING0_INT_FRAME
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	pushl $do_spurious_interrupt_bug
+	CFI_ADJUST_CFA_OFFSET 4
+	jmp error_code
+	CFI_ENDPROC
+END(spurious_interrupt_bug)
+
+ENTRY(kernel_thread_helper)
+	pushl $0		# fake return address for unwinder
+	CFI_STARTPROC
+	movl %edx,%eax
+	push %edx
+	CFI_ADJUST_CFA_OFFSET 4
+	call *%ebx
+	push %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	call do_exit
+	CFI_ENDPROC
+ENDPROC(kernel_thread_helper)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+	CFI_STARTPROC
+	pushl $0
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	TRACE_IRQS_OFF
+
+	/* Check to see if we got the event in the critical
+	   region in xen_iret_direct, after we've reenabled
+	   events and checked for pending events.  This simulates
+	   iret instruction's behaviour where it delivers a
+	   pending interrupt when enabling interrupts. */
+	movl PT_EIP(%esp),%eax
+	cmpl $xen_iret_start_crit,%eax
+	jb   1f
+	cmpl $xen_iret_end_crit,%eax
+	jae  1f
+
+	call xen_iret_crit_fixup
+
+1:	mov %esp, %eax
+	call xen_evtchn_do_upcall
+	jmp  ret_from_intr
+	CFI_ENDPROC
+ENDPROC(xen_hypervisor_callback)
+
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we fix up by reattempting the load, and zeroing the segment
+# register if the load fails.
+# Category 2 we fix up by jumping to do_iret_error. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by maintaining a status value in EAX.
+ENTRY(xen_failsafe_callback)
+	CFI_STARTPROC
+	pushl %eax
+	CFI_ADJUST_CFA_OFFSET 4
+	movl $1,%eax
+1:	mov 4(%esp),%ds
+2:	mov 8(%esp),%es
+3:	mov 12(%esp),%fs
+4:	mov 16(%esp),%gs
+	testl %eax,%eax
+	popl %eax
+	CFI_ADJUST_CFA_OFFSET -4
+	lea 16(%esp),%esp
+	CFI_ADJUST_CFA_OFFSET -16
+	jz 5f
+	addl $16,%esp
+	jmp iret_exc		# EAX != 0 => Category 2 (Bad IRET)
+5:	pushl $0		# EAX == 0 => Category 1 (Bad segment)
+	CFI_ADJUST_CFA_OFFSET 4
+	SAVE_ALL
+	jmp ret_from_exception
+	CFI_ENDPROC
+
+.section .fixup,"ax"
+6:	xorl %eax,%eax
+	movl %eax,4(%esp)
+	jmp 1b
+7:	xorl %eax,%eax
+	movl %eax,8(%esp)
+	jmp 2b
+8:	xorl %eax,%eax
+	movl %eax,12(%esp)
+	jmp 3b
+9:	xorl %eax,%eax
+	movl %eax,16(%esp)
+	jmp 4b
+.previous
+.section __ex_table,"a"
+	.align 4
+	.long 1b,6b
+	.long 2b,7b
+	.long 3b,8b
+	.long 4b,9b
+.previous
+ENDPROC(xen_failsafe_callback)
+
+#endif	/* CONFIG_XEN */
+
+.section .rodata,"a"
+#include "syscall_table_32.S"
+
+syscall_table_size=(.-sys_call_table)