um: create a proper drivers Kconfig

Merge arch/um/Kconfig.char and arch/um/Kconfig.net into a new
arch/um/drivers/Kconfig.  This fits the way Kconfig files are placed
elsewhere in the kernel tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

1 files changed, 337 insertions, 0 deletions

diff --git a/arch/um/drivers/Kconfig b/arch/um/drivers/Kconfig
new file mode 100644
index 000000000000..2b1aaf7755aa
--- /dev/null
+++ b/arch/um/drivers/Kconfig
@@ -0,0 +1,337 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "UML Character Devices"
+
+config STDERR_CONSOLE
+	bool "stderr console"
+	default y
+	help
+	  console driver which dumps all printk messages to stderr.
+
+config SSL
+	bool "Virtual serial line"
+	help
+          The User-Mode Linux environment allows you to create virtual serial
+          lines on the UML that are usually made to show up on the host as
+          ttys or ptys.
+
+          See <http://user-mode-linux.sourceforge.net/old/input.html> for more
+          information and command line examples of how to use this facility.
+
+          Unless you have a specific reason for disabling this, say Y.
+
+config NULL_CHAN
+	bool "null channel support"
+	help
+          This option enables support for attaching UML consoles and serial
+          lines to a device similar to /dev/null.  Data written to it disappears
+          and there is never any data to be read.
+
+config PORT_CHAN
+	bool "port channel support"
+	help
+          This option enables support for attaching UML consoles and serial
+          lines to host portals.  They may be accessed with 'telnet <host>
+          <port number>'.  Any number of consoles and serial lines may be
+          attached to a single portal, although what UML device you get when
+          you telnet to that portal will be unpredictable.
+          It is safe to say 'Y' here.
+
+config PTY_CHAN
+	bool "pty channel support"
+	help
+          This option enables support for attaching UML consoles and serial
+          lines to host pseudo-terminals.  Access to both traditional
+          pseudo-terminals (/dev/pty*) and pts pseudo-terminals are controlled
+          with this option.  The assignment of UML devices to host devices
+          will be announced in the kernel message log.
+          It is safe to say 'Y' here.
+
+config TTY_CHAN
+	bool "tty channel support"
+	help
+          This option enables support for attaching UML consoles and serial
+          lines to host terminals.  Access to both virtual consoles
+          (/dev/tty*) and the slave side of pseudo-terminals (/dev/ttyp* and
+          /dev/pts/*) are controlled by this option.
+          It is safe to say 'Y' here.
+
+config XTERM_CHAN
+	bool "xterm channel support"
+	help
+          This option enables support for attaching UML consoles and serial
+          lines to xterms.  Each UML device so assigned will be brought up in
+          its own xterm.
+          It is safe to say 'Y' here.
+
+config NOCONFIG_CHAN
+	bool
+	default !(XTERM_CHAN && TTY_CHAN && PTY_CHAN && PORT_CHAN && NULL_CHAN)
+
+config CON_ZERO_CHAN
+	string "Default main console channel initialization"
+	default "fd:0,fd:1"
+	help
+          This is the string describing the channel to which the main console
+          will be attached by default.  This value can be overridden from the
+          command line.  The default value is "fd:0,fd:1", which attaches the
+          main console to stdin and stdout.
+          It is safe to leave this unchanged.
+
+config CON_CHAN
+	string "Default console channel initialization"
+	default "xterm"
+	help
+          This is the string describing the channel to which all consoles
+          except the main console will be attached by default.  This value can
+          be overridden from the command line.  The default value is "xterm",
+          which brings them up in xterms.
+          It is safe to leave this unchanged, although you may wish to change
+          this if you expect the UML that you build to be run in environments
+          which don't have X or xterm available.
+
+config SSL_CHAN
+	string "Default serial line channel initialization"
+	default "pty"
+	help
+          This is the string describing the channel to which the serial lines
+          will be attached by default.  This value can be overridden from the
+          command line.  The default value is "pty", which attaches them to
+          traditional pseudo-terminals.
+          It is safe to leave this unchanged, although you may wish to change
+          this if you expect the UML that you build to be run in environments
+          which don't have a set of /dev/pty* devices.
+
+config UML_SOUND
+	tristate "Sound support"
+	help
+          This option enables UML sound support.  If enabled, it will pull in
+          soundcore and the UML hostaudio relay, which acts as a intermediary
+          between the host's dsp and mixer devices and the UML sound system.
+          It is safe to say 'Y' here.
+
+config SOUND
+	tristate
+	default UML_SOUND
+
+config SOUND_OSS_CORE
+	bool
+	default UML_SOUND
+
+config HOSTAUDIO
+	tristate
+	default UML_SOUND
+
+endmenu
+
+menu "UML Network Devices"
+	depends on NET
+
+# UML virtual driver
+config UML_NET
+	bool "Virtual network device"
+	help
+        While the User-Mode port cannot directly talk to any physical
+        hardware devices, this choice and the following transport options
+        provide one or more virtual network devices through which the UML
+        kernels can talk to each other, the host, and with the host's help,
+        machines on the outside world.
+
+        For more information, including explanations of the networking and
+        sample configurations, see
+        <http://user-mode-linux.sourceforge.net/old/networking.html>.
+
+        If you'd like to be able to enable networking in the User-Mode
+        linux environment, say Y; otherwise say N.  Note that you must
+        enable at least one of the following transport options to actually
+        make use of UML networking.
+
+config UML_NET_ETHERTAP
+	bool "Ethertap transport"
+	depends on UML_NET
+	help
+        The Ethertap User-Mode Linux network transport allows a single
+        running UML to exchange packets with its host over one of the
+        host's Ethertap devices, such as /dev/tap0.  Additional running
+        UMLs can use additional Ethertap devices, one per running UML.
+        While the UML believes it's on a (multi-device, broadcast) virtual
+        Ethernet network, it's in fact communicating over a point-to-point
+        link with the host.
+
+        To use this, your host kernel must have support for Ethertap
+        devices.  Also, if your host kernel is 2.4.x, it must have
+        CONFIG_NETLINK_DEV configured as Y or M.
+
+        For more information, see
+        <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
+        has examples of the UML command line to use to enable Ethertap
+        networking.
+
+        If you'd like to set up an IP network with the host and/or the
+        outside world, say Y to this, the Daemon Transport and/or the
+        Slip Transport.  You'll need at least one of them, but may choose
+        more than one without conflict.  If you don't need UML networking,
+        say N.
+
+config UML_NET_TUNTAP
+	bool "TUN/TAP transport"
+	depends on UML_NET
+	help
+        The UML TUN/TAP network transport allows a UML instance to exchange
+        packets with the host over a TUN/TAP device.  This option will only
+        work with a 2.4 host, unless you've applied the TUN/TAP patch to
+        your 2.2 host kernel.
+
+        To use this transport, your host kernel must have support for TUN/TAP
+        devices, either built-in or as a module.
+
+config UML_NET_SLIP
+	bool "SLIP transport"
+	depends on UML_NET
+	help
+        The slip User-Mode Linux network transport allows a running UML to
+        network with its host over a point-to-point link.  Unlike Ethertap,
+        which can carry any Ethernet frame (and hence even non-IP packets),
+        the slip transport can only carry IP packets.
+
+        To use this, your host must support slip devices.
+
+        For more information, see
+        <http://user-mode-linux.sourceforge.net/old/networking.html>.
+        has examples of the UML command line to use to enable slip
+        networking, and details of a few quirks with it.
+
+        The Ethertap Transport is preferred over slip because of its
+        limitations.  If you prefer slip, however, say Y here.  Otherwise
+        choose the Multicast transport (to network multiple UMLs on
+        multiple hosts), Ethertap (to network with the host and the
+        outside world), and/or the Daemon transport (to network multiple
+        UMLs on a single host).  You may choose more than one without
+        conflict.  If you don't need UML networking, say N.
+
+config UML_NET_DAEMON
+	bool "Daemon transport"
+	depends on UML_NET
+	help
+        This User-Mode Linux network transport allows one or more running
+        UMLs on a single host to communicate with each other, but not to
+        the host.
+
+        To use this form of networking, you'll need to run the UML
+        networking daemon on the host.
+
+        For more information, see
+        <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
+        has examples of the UML command line to use to enable Daemon
+        networking.
+
+        If you'd like to set up a network with other UMLs on a single host,
+        say Y.  If you need a network between UMLs on multiple physical
+        hosts, choose the Multicast Transport.  To set up a network with
+        the host and/or other IP machines, say Y to the Ethertap or Slip
+        transports.  You'll need at least one of them, but may choose
+        more than one without conflict.  If you don't need UML networking,
+        say N.
+
+config UML_NET_VECTOR
+	bool "Vector I/O high performance network devices"
+	depends on UML_NET
+	help
+	This User-Mode Linux network driver uses multi-message send
+	and receive functions. The host running the UML guest must have
+	a linux kernel version above 3.0 and a libc version > 2.13.
+	This driver provides tap, raw, gre and l2tpv3 network transports
+	with up to 4 times higher network throughput than the UML network
+	drivers.
+
+config UML_NET_VDE
+	bool "VDE transport"
+	depends on UML_NET
+	help
+	This User-Mode Linux network transport allows one or more running
+	UMLs on a single host to communicate with each other and also
+	with the rest of the world using Virtual Distributed Ethernet,
+	an improved fork of uml_switch.
+
+	You must have libvdeplug installed in order to build the vde
+	transport into UML.
+
+	To use this form of networking, you will need to run vde_switch
+	on the host.
+
+	For more information, see <http://wiki.virtualsquare.org/>
+	That site has a good overview of what VDE is and also examples
+	of the UML command line to use to enable VDE networking.
+
+	If you need UML networking with VDE,
+	say Y.
+
+config UML_NET_MCAST
+	bool "Multicast transport"
+	depends on UML_NET
+	help
+        This Multicast User-Mode Linux network transport allows multiple
+        UMLs (even ones running on different host machines!) to talk to
+        each other over a virtual ethernet network.  However, it requires
+        at least one UML with one of the other transports to act as a
+        bridge if any of them need to be able to talk to their hosts or any
+        other IP machines.
+
+        To use this, your host kernel(s) must support IP Multicasting.
+
+        For more information, see
+        <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
+        has examples of the UML command line to use to enable Multicast
+        networking, and notes about the security of this approach.
+
+        If you need UMLs on multiple physical hosts to communicate as if
+        they shared an Ethernet network, say Y.  If you need to communicate
+        with other IP machines, make sure you select one of the other
+        transports (possibly in addition to Multicast; they're not
+        exclusive).  If you don't need to network UMLs say N to each of
+        the transports.
+
+config UML_NET_PCAP
+	bool "pcap transport"
+	depends on UML_NET
+	help
+	The pcap transport makes a pcap packet stream on the host look
+	like an ethernet device inside UML.  This is useful for making
+	UML act as a network monitor for the host.  You must have libcap
+	installed in order to build the pcap transport into UML.
+
+        For more information, see
+        <http://user-mode-linux.sourceforge.net/old/networking.html>  That site
+        has examples of the UML command line to use to enable this option.
+
+	If you intend to use UML as a network monitor for the host, say
+	Y here.  Otherwise, say N.
+
+config UML_NET_SLIRP
+	bool "SLiRP transport"
+	depends on UML_NET
+	help
+        The SLiRP User-Mode Linux network transport allows a running UML
+        to network by invoking a program that can handle SLIP encapsulated
+        packets.  This is commonly (but not limited to) the application
+        known as SLiRP, a program that can re-socket IP packets back onto
+        the host on which it is run.  Only IP packets are supported,
+        unlike other network transports that can handle all Ethernet
+        frames.  In general, slirp allows the UML the same IP connectivity
+        to the outside world that the host user is permitted, and unlike
+        other transports, SLiRP works without the need of root level
+        privleges, setuid binaries, or SLIP devices on the host.  This
+        also means not every type of connection is possible, but most
+        situations can be accommodated with carefully crafted slirp
+        commands that can be passed along as part of the network device's
+        setup string.  The effect of this transport on the UML is similar
+        that of a host behind a firewall that masquerades all network
+        connections passing through it (but is less secure).
+
+        To use this you should first have slirp compiled somewhere
+        accessible on the host, and have read its documentation.  If you
+        don't need UML networking, say N.
+
+        Startup example: "eth0=slirp,FE:FD:01:02:03:04,/usr/local/bin/slirp"
+
+endmenu