Merge ../linux-2.6

39 files changed, 2789 insertions, 228 deletions

diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
index e95c48d57571..84d96b857e4a 100644
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ b/arch/ppc/4xx_io/serial_sicc.c
@@ -1145,8 +1145,8 @@ static int set_serial_info(struct SICC_info *info,
     info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
                (info->flags & ASYNC_INTERNAL_FLAGS));
     state->custom_divisor = new_serial.custom_divisor;
-    state->close_delay = new_serial.close_delay * HZ / 100;
-    state->closing_wait = new_serial.closing_wait * HZ / 100;
+    state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
+    state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
     info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
     port->fifosize = new_serial.xmit_fifo_size;
 
@@ -1465,10 +1465,8 @@ static void siccuart_close(struct tty_struct *tty, struct file *filp)
     info->event = 0;
     info->tty = NULL;
     if (info->blocked_open) {
-        if (info->state->close_delay) {
-            set_current_state(TASK_INTERRUPTIBLE);
-            schedule_timeout(info->state->close_delay);
-        }
+        if (info->state->close_delay)
+            schedule_timeout_interruptible(info->state->close_delay);
         wake_up_interruptible(&info->open_wait);
     }
     info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
@@ -1496,7 +1494,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
      * Note: we have to use pretty tight timings here to satisfy
      * the NIST-PCTS.
      */
-    char_time = (info->timeout - HZ/50) / info->port->fifosize;
+    char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
     char_time = char_time / 5;
     if (char_time == 0)
         char_time = 1;
@@ -1521,8 +1519,7 @@ static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
            tty->index, jiffies,
            expire, char_time);
     while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
-        set_current_state(TASK_INTERRUPTIBLE);
-        schedule_timeout(char_time);
+        schedule_timeout_interruptible(char_time);
         if (signal_pending(current))
             break;
         if (timeout && time_after(jiffies, expire))
@@ -1773,7 +1770,7 @@ int __init siccuart_init(void)
     for (i = 0; i < SERIAL_SICC_NR; i++) {
         struct SICC_state *state = sicc_state + i;
         state->line     = i;
-        state->close_delay  = 5 * HZ / 10;
+        state->close_delay  = msecs_to_jiffies(500);
         state->closing_wait = 30 * HZ;
 	spin_lock_init(&state->sicc_lock);
     }
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
index 2086c6ad1147..4edeede9ccfd 100644
--- a/arch/ppc/8260_io/fcc_enet.c
+++ b/arch/ppc/8260_io/fcc_enet.c
@@ -1309,8 +1309,7 @@ static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
 
 	/* Davicom takes a bit to come up after a reset,
 	 * so wait here for a bit */
-	set_current_state(TASK_UNINTERRUPTIBLE);
-	schedule_timeout(timeout);
+	schedule_timeout_uninterruptible(timeout);
 }
 
 static phy_info_t phy_info_dm9161 = {
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index 532caa388dc2..49eb2a7e65c0 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -1013,8 +1013,7 @@ static void CS_IrqCleanup(void)
 	*/
 	cpm_free_handler(CPMVEC_SMC2);
 
-	if (beep_buf)
-		kfree(beep_buf);
+	kfree(beep_buf);
 	kd_mksound = orig_mksound;
 }
 #endif /* MODULE */
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
index 114b90fdea24..8fa51b0a32d2 100644
--- a/arch/ppc/Kconfig
+++ b/arch/ppc/Kconfig
@@ -746,6 +746,16 @@ config MPC834x
 	bool
 	default y if MPC834x_SYS
 
+config CPM1
+	bool
+	depends on 8xx
+	default y
+	help
+	  The CPM1 (Communications Processor Module) is a coprocessor on
+	  embedded CPUs made by Motorola.  Selecting this option means that
+	  you wish to build a kernel for a machine with a CPM1 coprocessor
+	  on it (8xx, 827x, 8560).
+
 config CPM2
 	bool
 	depends on 8260 || MPC8560 || MPC8555
@@ -1247,6 +1257,14 @@ source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"
 
+config RAPIDIO
+	bool "RapidIO support" if MPC8540 || MPC8560
+	help
+	  If you say Y here, the kernel will include drivers and
+	  infrastructure code to support RapidIO interconnect devices.
+
+source "drivers/rapidio/Kconfig"
+
 endmenu
 
 menu "Advanced setup"
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
index b7bd8f61a4ad..82df88b01bbe 100644
--- a/arch/ppc/boot/simple/Makefile
+++ b/arch/ppc/boot/simple/Makefile
@@ -67,6 +67,12 @@ zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
   entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
      extra.o-$(CONFIG_BAMBOO)		:= pibs.o
 
+      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE
+zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE
+         end-$(CONFIG_BUBINGA)		:= bubinga
+  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000
+     extra.o-$(CONFIG_BUBINGA)		:= openbios.o
+
       zimage-$(CONFIG_EBONY)		:= zImage-TREE
 zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
          end-$(CONFIG_EBONY)		:= ebony
@@ -79,12 +85,30 @@ zimageinitrd-$(CONFIG_LUAN)		:= zImage.initrd-TREE
   entrypoint-$(CONFIG_LUAN)		:= 0x01000000
      extra.o-$(CONFIG_LUAN)		:= pibs.o
 
+      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
+zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
+         end-$(CONFIG_YUCCA)		:= yucca
+  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
+     extra.o-$(CONFIG_YUCCA)		:= pibs.o
+
       zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
 zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
          end-$(CONFIG_OCOTEA)		:= ocotea
   entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000
      extra.o-$(CONFIG_OCOTEA)		:= pibs.o
 
+      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE
+zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE
+         end-$(CONFIG_SYCAMORE)		:= sycamore
+  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000
+     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o
+
+      zimage-$(CONFIG_WALNUT)		:= zImage-TREE
+zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE
+         end-$(CONFIG_WALNUT)		:= walnut
+  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000
+     extra.o-$(CONFIG_WALNUT)		:= openbios.o
+
      extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o
          end-$(CONFIG_EV64260)		:= ev64260
    cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)
@@ -162,7 +186,8 @@ OBJCOPY_ARGS			:= -O elf32-powerpc
 
 # head.o and relocate.o must be at the start.
 boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_40x)		+= embed_config.o
+boot-$(CONFIG_REDWOOD_5)	+= embed_config.o
+boot-$(CONFIG_REDWOOD_6)	+= embed_config.o
 boot-$(CONFIG_8xx)		+= embed_config.o
 boot-$(CONFIG_8260)		+= embed_config.o
 boot-$(CONFIG_BSEIP)		+= iic.o
diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
index e02de5b467a4..f415d6c62362 100644
--- a/arch/ppc/boot/simple/misc.c
+++ b/arch/ppc/boot/simple/misc.c
@@ -23,7 +23,7 @@
 #include <asm/page.h>
 #include <asm/mmu.h>
 #include <asm/bootinfo.h>
-#ifdef CONFIG_44x
+#ifdef CONFIG_4xx
 #include <asm/ibm4xx.h>
 #endif
 #include <asm/reg.h>
@@ -88,6 +88,14 @@ get_mem_size(void)
 	return 0;
 }
 
+#if defined(CONFIG_40x)
+#define PPC4xx_EMAC0_MR0	EMAC0_BASE
+#endif
+
+#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
+#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0
+#endif
+
 struct bi_record *
 decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 {
@@ -103,13 +111,13 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 	com_port = serial_init(0, NULL);
 #endif
 
-#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
+#if defined(PPC4xx_EMAC0_MR0)
 	/* Reset MAL */
 	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
 	/* Wait for reset */
 	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
 	/* Reset EMAC */
-	*(volatile unsigned long *)PPC44x_EMAC0_MR0 = 0x20000000;
+	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
 	__asm__ __volatile__("eieio");
 #endif
 
@@ -164,7 +172,9 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
 	}
 
+#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
 	avail_ram = (char *)0x00400000;
+#endif
 	end_avail = (char *)0x00800000;
 	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
 	puthex((unsigned long)end_avail); puts("\n");
diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
index c732b6d70cfb..81f11d8b30a7 100644
--- a/arch/ppc/boot/simple/openbios.c
+++ b/arch/ppc/boot/simple/openbios.c
@@ -1,19 +1,43 @@
 /*
  * arch/ppc/boot/simple/openbios.c
  *
- * 2005 (c) SYSGO AG - g.jaeger@sysgo.com
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ *      2005 (c) SYSGO AG - g.jaeger@sysgo.com
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without
  * any warranty of any kind, whether express or implied.
  *
- * Derived from arch/ppc/boot/simple/pibs.c (from MontaVista)
  */
 
 #include <linux/types.h>
 #include <linux/config.h>
 #include <linux/string.h>
 #include <asm/ppcboot.h>
-#include <platforms/4xx/ebony.h>
+#include <asm/ibm4xx.h>
+#include <asm/reg.h>
+#ifdef CONFIG_40x
+#include <asm/io.h>
+#endif
+
+#if defined(CONFIG_BUBINGA)
+#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
+#else
+#define BOARD_INFO_VECTOR	0xFFFE0B50
+#endif
+
+#ifdef CONFIG_40x
+/* Supply a default Ethernet address for those eval boards that don't
+ * ship with one.  This is an address from the MBX board I have, so
+ * it is unlikely you will find it on your network.
+ */
+static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
+
+extern unsigned long timebase_period_ns;
+#endif /* CONFIG_40x */
 
 extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
 				       unsigned long cksum);
@@ -23,15 +47,85 @@ extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
 bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
 bd_t *hold_residual = &hold_resid_buf;
 
+typedef struct openbios_board_info {
+        unsigned char    bi_s_version[4];       /* Version of this structure */
+        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
+        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
+#ifdef CONFIG_405EP
+        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */
+#else /* CONFIG_405EP */
+        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */
+#endif /* CONFIG_405EP */
+        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
+        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
+        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
+        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
+#ifdef CONFIG_405EP
+        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
+        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif /* CONFIG_405EP */
+} openbios_bd_t;
+
 void *
 load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
 		void *ign1, void *ign2)
 {
-	decompress_kernel(load_addr, num_words, cksum);
+#ifdef CONFIG_40x
+	openbios_bd_t *openbios_bd = NULL;
+	openbios_bd_t *(*get_board_info)(void) =
+		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
+
+	/*
+	 * On 40x platforms we not only need the MAC-addresses, but also the
+	 * clocks and memsize. Now try to get all values using the OpenBIOS
+	 * "get_board_info()" callback.
+	 */
+	if ((openbios_bd = get_board_info()) != NULL) {
+		/*
+		 * Copy bd_info from OpenBIOS struct into U-Boot struct
+		 * used by kernel
+		 */
+	        hold_residual->bi_memsize = openbios_bd->bi_memsize;
+	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
+	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
+	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
+		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
+#ifdef CONFIG_405EP
+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
+		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
+	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
+	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
+#else /* CONFIG_405EP */
+		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
+#endif /* CONFIG_405EP */
+	} else {
+		/* Hmmm...better try to stuff some defaults.
+		 */
+		hold_residual->bi_memsize = 16 * 1024 * 1024;
+		hold_residual->bi_intfreq = 200000000;
+		hold_residual->bi_busfreq = 100000000;
+		hold_residual->bi_pci_busfreq = 66666666;
+
+		/*
+		 * Only supply one mac-address in this fallback
+		 */
+		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
+#ifdef CONFIG_405EP
+	        hold_residual->bi_opbfreq = 50000000;
+	        hold_residual->bi_procfreq = 200000000;
+#endif /* CONFIG_405EP */
+	}
 
+	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
+#endif /* CONFIG_40x */
+
+#ifdef CONFIG_440GP
 	/* simply copy the MAC addresses */
-	memcpy(hold_residual->bi_enetaddr,  (char *)EBONY_OPENBIOS_MAC_BASE, 6);
-	memcpy(hold_residual->bi_enet1addr, (char *)(EBONY_OPENBIOS_MAC_BASE+EBONY_OPENBIOS_MAC_OFFSET), 6);
+	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);
+	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
+#endif /* CONFIG_440GP */
+
+	decompress_kernel(load_addr, num_words, cksum);
 
 	return (void *)hold_residual;
 }
diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig
index de9bbb791db9..d471e578dcb5 100644
--- a/arch/ppc/configs/ev64360_defconfig
+++ b/arch/ppc/configs/ev64360_defconfig
@@ -1,17 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc5
-# Fri Aug  5 15:18:23 2005
+# Linux kernel version: 2.6.14
+# Fri Oct 28 19:15:34 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 
 #
 # Code maturity level options
@@ -26,6 +26,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 # General setup
 #
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
@@ -35,6 +36,7 @@ CONFIG_SYSCTL=y
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -74,7 +76,7 @@ CONFIG_TAU=y
 # CONFIG_TAU_AVERAGE is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
+# CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_NOT_COHERENT_CACHE=y
 
@@ -86,22 +88,18 @@ CONFIG_NOT_COHERENT_CACHE=y
 # CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
 # CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
 # CONFIG_POWERPMC250 is not set
 # CONFIG_CHESTNUT is not set
 # CONFIG_SPRUCE is not set
 # CONFIG_HDPU is not set
 # CONFIG_EV64260 is not set
 # CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
 # CONFIG_MVME5100 is not set
 # CONFIG_PPLUS is not set
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
 # CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
 # CONFIG_PAL4 is not set
 # CONFIG_GEMINI is not set
 # CONFIG_EST8260 is not set
@@ -138,10 +136,13 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"
+# CONFIG_PM is not set
+# CONFIG_SOFTWARE_SUSPEND is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -152,7 +153,6 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -206,14 +206,19 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_NETFILTER is not set
 
 #
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
@@ -239,6 +244,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
 
 #
 # Device Drivers
@@ -252,6 +258,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 
 #
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
 # Memory Technology Devices (MTD)
 #
 CONFIG_MTD=y
@@ -358,7 +369,6 @@ CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_LBD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 
@@ -379,6 +389,7 @@ CONFIG_IOSCHED_CFQ=y
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 
 #
@@ -420,6 +431,10 @@ CONFIG_NETDEVICES=y
 # CONFIG_ARCNET is not set
 
 #
+# PHY device support
+#
+
+#
 # Ethernet (10 or 100Mbit)
 #
 # CONFIG_NET_ETHERNET is not set
@@ -434,6 +449,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
@@ -446,6 +462,7 @@ CONFIG_MV643XX_ETH_0=y
 #
 # Ethernet (10000 Mbit)
 #
+# CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 
@@ -547,7 +564,20 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Watchdog Cards
 #
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_MV64X60_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -571,7 +601,6 @@ CONFIG_GEN_RTC=y
 # I2C support
 #
 # CONFIG_I2C is not set
-# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
@@ -582,6 +611,7 @@ CONFIG_GEN_RTC=y
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -589,6 +619,10 @@ CONFIG_HWMON=y
 #
 
 #
+# Multimedia Capabilities Port drivers
+#
+
+#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -651,10 +685,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -663,6 +693,7 @@ CONFIG_INOTIFY=y
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -683,11 +714,10 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -735,6 +765,7 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -751,6 +782,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
@@ -767,6 +799,7 @@ CONFIG_ZLIB_DEFLATE=y
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SERIAL_TEXT_DEBUG is not set
 
 #
 # Security options
diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig
index 66dae8367659..3fedc43e44ad 100644
--- a/arch/ppc/configs/stx_gp3_defconfig
+++ b/arch/ppc/configs/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Wed Jan 26 14:32:58 2005
+# Linux kernel version: 2.6.12-rc4
+# Tue May 24 18:11:04 2005
 #
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
@@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y
 CONFIG_PPC=y
 CONFIG_PPC32=y
 CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 
 #
 # Code maturity level options
@@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
@@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -69,9 +74,11 @@ CONFIG_KMOD=y
 CONFIG_E500=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
+# CONFIG_PHYS_64BIT is not set
 # CONFIG_SPE is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PM is not set
 CONFIG_85xx=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
 
@@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
@@ -104,15 +112,15 @@ CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
+CONFIG_RAPIDIO=y
+CONFIG_RAPIDIO_8_BIT_TRANSPORT=y
+CONFIG_RAPIDIO_DISC_TIMEOUT=30
 
 #
 # Advanced setup
@@ -152,7 +160,7 @@ CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
 # CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
 # CONFIG_PARPORT_1284 is not set
 
 #
@@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_IMM is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=m
@@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
@@ -322,7 +329,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m
 #
 # Network testing
 #
-# CONFIG_NET_PKTGEN is not set
+CONFIG_NET_PKTGEN=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_HAMRADIO is not set
@@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y
 # Wan interfaces
 #
 # CONFIG_WAN is not set
+CONFIG_RIONET=y
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PLIP is not set
@@ -536,20 +543,6 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
 #
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
@@ -567,6 +560,19 @@ CONFIG_MOUSE_PS2=y
 # CONFIG_INPUT_MISC is not set
 
 #
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+
+#
 # Character devices
 #
 # CONFIG_VT is not set
@@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y
 # CONFIG_SERIAL_CPM_SCC4 is not set
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -626,6 +633,11 @@ CONFIG_DRM=m
 # CONFIG_RAW_DRIVER is not set
 
 #
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
 # I2C support
 #
 CONFIG_I2C=m
@@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_ISA is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_PARPORT is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
 # CONFIG_SCx200_ACB is not set
@@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
 # CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
 # CONFIG_SENSORS_LM75 is not set
@@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_LM85 is not set
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m
 #
 # Other I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_M41T00 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m
 # Graphics support
 #
 # CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -752,13 +769,9 @@ CONFIG_SOUND=m
 #
 # USB support
 #
-# CONFIG_USB is not set
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
 
 #
 # USB Gadget Support
@@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+
+#
+# XFS support
+#
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -859,7 +876,6 @@ CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index c610ca933a25..76a55a438f23 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_POWER4)		+= cpu_setup_power4.o
 obj-$(CONFIG_MODULES)		+= module.o ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)	+= dma-mapping.o
 obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_RAPIDIO)		+= rio.o
 obj-$(CONFIG_KGDB)		+= ppc-stub.o
 obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
 obj-$(CONFIG_TAU)		+= temp.o
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
index 8b49679fad54..677c571aa276 100644
--- a/arch/ppc/kernel/head_44x.S
+++ b/arch/ppc/kernel/head_44x.S
@@ -190,8 +190,8 @@ skpinv:	addi	r4,r4,1				/* Increment */
 
 	/* xlat fields */
 	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifndef CONFIG_440EP
-	ori	r4,r4,0x0001		/* ERPN is 1 for second 4GB page */
+#ifdef UART0_PHYS_ERPN
+	ori	r4,r4,UART0_PHYS_ERPN		/* Add ERPN if above 4GB */
 #endif
 
 	/* attrib fields */
diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c
new file mode 100644
index 000000000000..29487fedfc76
--- /dev/null
+++ b/arch/ppc/kernel/rio.c
@@ -0,0 +1,52 @@
+/*
+ * RapidIO PPC32 support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/rio.h>
+
+#include <asm/rio.h>
+
+/**
+ * platform_rio_init - Do platform specific RIO init
+ *
+ * Any platform specific initialization of RapdIO
+ * hardware is done here as well as registration
+ * of any active master ports in the system.
+ */
+void __attribute__ ((weak))
+    platform_rio_init(void)
+{
+	printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
+}
+
+/**
+ * ppc_rio_init - Do PPC32 RIO init
+ *
+ * Calls platform-specific RIO init code and then calls
+ * rio_init_mports() to initialize any master ports that
+ * have been registered with the RIO subsystem.
+ */
+static int __init ppc_rio_init(void)
+{
+	printk(KERN_INFO "RIO: RapidIO init\n");
+
+	/* Platform specific initialization */
+	platform_rio_init();
+
+	/* Enumerate all registered ports */
+	rio_init_mports();
+
+	return 0;
+}
+
+subsys_initcall(ppc_rio_init);
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index 76f4476cab44..d8837911bbc6 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -82,6 +82,12 @@ config LUAN
 	help
 	  This option enables support for the IBM PPC440SP evaluation board.
 
+config YUCCA
+	bool "Yucca"
+	select WANT_EARLY_SERIAL
+	help
+	  This option enables support for the AMCC PPC440SPe evaluation board.
+
 config OCOTEA
 	bool "Ocotea"
 	select WANT_EARLY_SERIAL
@@ -124,9 +130,14 @@ config 440SP
 	depends on LUAN
 	default y
 
+config 440SPE
+	bool
+	depends on YUCCA
+	default y
+
 config 440
 	bool
-	depends on 440GP || 440SP || 440EP
+	depends on 440GP || 440SP || 440SPE || 440EP
 	default y
 
 config 440A
@@ -158,7 +169,7 @@ config BOOKE
 
 config IBM_OCP
 	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
 	default y
 
 config XILINX_OCP
@@ -168,7 +179,7 @@ config XILINX_OCP
 
 config IBM_EMAC4
 	bool
-	depends on 440GX || 440SP
+	depends on 440GX || 440SP || 440SPE
 	default y
 
 config BIOS_FIXUP
@@ -214,7 +225,7 @@ config EMBEDDEDBOOT
 
 config IBM_OPENBIOS
 	bool
-	depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT
+	depends on ASH || REDWOOD_5 || REDWOOD_6
 	default y
 
 config PPC4xx_DMA
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index 1dd6d7fd6a9a..c9bb61170954 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_EBONY)		+= ebony.o
 obj-$(CONFIG_EP405)		+= ep405.o
 obj-$(CONFIG_BUBINGA)		+= bubinga.o
 obj-$(CONFIG_LUAN)		+= luan.o
+obj-$(CONFIG_YUCCA)		+= yucca.o
 obj-$(CONFIG_OCOTEA)		+= ocotea.o
 obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
 obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
@@ -22,6 +23,7 @@ obj-$(CONFIG_440EP)		+= ibm440ep.o
 obj-$(CONFIG_440GP)		+= ibm440gp.o
 obj-$(CONFIG_440GX)		+= ibm440gx.o
 obj-$(CONFIG_440SP)		+= ibm440sp.o
+obj-$(CONFIG_440SPE)		+= ppc440spe.o
 obj-$(CONFIG_405EP)		+= ibm405ep.o
 obj-$(CONFIG_405GPR)		+= ibm405gpr.o
 obj-$(CONFIG_VIRTEX_II_PRO)	+= virtex-ii_pro.o
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
index 3678abf86313..8110f55668c5 100644
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ b/arch/ppc/platforms/4xx/bubinga.c
@@ -89,7 +89,7 @@ bubinga_early_serial_map(void)
           * by 16.
           */
 	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-	uart_clock = __res.bi_pllouta_freq / uart_div;
+	uart_clock = __res.bi_procfreq / uart_div;
 
 	/* Setup serial port access */
 	memset(&port, 0, sizeof(port));
diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
index b1df856f8e22..b5380cfaf5c0 100644
--- a/arch/ppc/platforms/4xx/bubinga.h
+++ b/arch/ppc/platforms/4xx/bubinga.h
@@ -1,52 +1,34 @@
 /*
- * Support for IBM PPC 405EP evaluation board (Bubinga).
+ * arch/ppc/platforms/4xx/bubinga.h
  *
- * Author: SAW (IBM), derived from walnut.h.
- *         Maintained by MontaVista Software <source@mvista.com>
+ * Bubinga board definitions
+ *
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ *	SAW (IBM)
+ *	2003 (c) MontaVista Softare Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __BUBINGA_H__
 #define __BUBINGA_H__
 
-/* 405EP */
+#include <linux/config.h>
 #include <platforms/4xx/ibm405ep.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-        unsigned char    bi_s_version[4];       /* Version of this structure */
-        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
-        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
-        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
-        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
-        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
-        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
-        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
-        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
+#include <asm/ppcboot.h>
 
 /* Memory map for the Bubinga board.
  * Generic 4xx plus RTC.
  */
 
-extern void *bubinga_rtc_base;
 #define BUBINGA_RTC_PADDR	((uint)0xf0000000)
 #define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR
 #define BUBINGA_RTC_SIZE	((uint)8*1024)
@@ -58,12 +40,18 @@ extern void *bubinga_rtc_base;
  * for typical configurations at various CPU speeds.
  * The base baud is calculated as (FWDA / EXT UART DIV / 16)
  */
-#define BASE_BAUD       0
+#define BASE_BAUD		0
 
-#define BUBINGA_FPGA_BASE      0xF0300000
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
 
-#define PPC4xx_MACHINE_NAME     "IBM Bubinga"
+#define PPC4xx_MACHINE_NAME	"IBM Bubinga"
 
-#endif /* !__ASSEMBLY__ */
 #endif /* __BUBINGA_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
index d08faa46a0ae..b91ad4272dfe 100644
--- a/arch/ppc/platforms/4xx/ebony.h
+++ b/arch/ppc/platforms/4xx/ebony.h
@@ -24,8 +24,8 @@
 #define PPC44x_EMAC0_MR0	0xE0000800
 
 /* Where to find the MAC info */
-#define EBONY_OPENBIOS_MAC_BASE   0xfffffe0c
-#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
+#define OPENBIOS_MAC_BASE	0xfffffe0c
+#define OPENBIOS_MAC_OFFSET	0x0c
 
 /* Default clock rates for Rev. B and Rev. C silicon */
 #define EBONY_440GP_RB_SYSCLK	33000000
diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c
new file mode 100644
index 000000000000..6139a0b3393e
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ppc440spe.c
@@ -0,0 +1,148 @@
+/*
+ * arch/ppc/platforms/4xx/ppc440spe.c
+ *
+ * PPC440SPe I/O descriptions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2002-2005 MontaVista Software Inc.
+ *
+ * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ * Copyright (c) 2003, 2004 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <platforms/4xx/ppc440spe.h>
+#include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
+
+static struct ocp_func_emac_data ppc440spe_emac0_def = {
+	.rgmii_idx	= -1,		/* No RGMII */
+	.rgmii_mux	= -1,		/* No RGMII */
+	.zmii_idx       = -1,           /* No ZMII */
+	.zmii_mux       = -1,           /* No ZMII */
+	.mal_idx        = 0,            /* MAL device index */
+	.mal_rx_chan    = 0,            /* MAL rx channel number */
+	.mal_tx_chan    = 0,            /* MAL tx channel number */
+	.wol_irq        = 61,  		/* WOL interrupt number */
+	.mdio_idx       = -1,           /* No shared MDIO */
+	.tah_idx	= -1,		/* No TAH */
+};
+OCP_SYSFS_EMAC_DATA()
+
+static struct ocp_func_mal_data ppc440spe_mal0_def = {
+	.num_tx_chans   = 1,    	/* Number of TX channels */
+	.num_rx_chans   = 1,    	/* Number of RX channels */
+	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
+	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
+	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
+	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
+	.serr_irq	= 33,		/* MAL System Error IRQ    */
+	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
+};
+OCP_SYSFS_MAL_DATA()
+
+static struct ocp_func_iic_data ppc440spe_iic0_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+
+static struct ocp_func_iic_data ppc440spe_iic1_def = {
+	.fast_mode	= 0,		/* Use standad mode (100Khz) */
+};
+OCP_SYSFS_IIC_DATA()
+
+struct ocp_def core_ocp[] = {
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 0,
+	  .paddr	= PPC440SPE_UART0_ADDR,
+	  .irq		= UART0_INT,
+	  .pm		= IBM_CPM_UART0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 1,
+	  .paddr	= PPC440SPE_UART1_ADDR,
+	  .irq		= UART1_INT,
+	  .pm		= IBM_CPM_UART1,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_16550,
+	  .index	= 2,
+	  .paddr	= PPC440SPE_UART2_ADDR,
+	  .irq		= UART2_INT,
+	  .pm		= IBM_CPM_UART2,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000400ULL,
+	  .irq		= 2,
+	  .pm		= IBM_CPM_IIC0,
+	  .additions	= &ppc440spe_iic0_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_IIC,
+	  .index	= 1,
+	  .paddr	= 0x00000004f0000500ULL,
+	  .irq		= 3,
+	  .pm		= IBM_CPM_IIC1,
+	  .additions	= &ppc440spe_iic1_def,
+	  .show		= &ocp_show_iic_data
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_GPIO,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000700ULL,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= IBM_CPM_GPIO0,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_MAL,
+	  .paddr	= OCP_PADDR_NA,
+	  .irq		= OCP_IRQ_NA,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ppc440spe_mal0_def,
+	  .show		= &ocp_show_mal_data,
+	},
+	{ .vendor	= OCP_VENDOR_IBM,
+	  .function	= OCP_FUNC_EMAC,
+	  .index	= 0,
+	  .paddr	= 0x00000004f0000800ULL,
+	  .irq		= 60,
+	  .pm		= OCP_CPM_NA,
+	  .additions	= &ppc440spe_emac0_def,
+	  .show		= &ocp_show_emac_data,
+	},
+	{ .vendor	= OCP_VENDOR_INVALID
+	}
+};
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x010f0004,
+	  .ext_irq_mask = 0x00000000,
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x001f8040,
+	  .ext_irq_mask = 0x00007c30,   /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x00000000,
+	  .ext_irq_mask = 0x000000fc,   /* IRQ0 - IRQ5 */
+	},
+	{ .polarity     = 0xffffffff,
+	  .triggering   = 0x00000000,
+	  .ext_irq_mask = 0x00000000,
+	},
+};
diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h
new file mode 100644
index 000000000000..2216846973b8
--- /dev/null
+++ b/arch/ppc/platforms/4xx/ppc440spe.h
@@ -0,0 +1,66 @@
+/*
+ * arch/ppc/platforms/4xx/ibm440spe.h
+ *
+ * PPC440SPe definitions
+ *
+ * Roland Dreier <rolandd@cisco.com>
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * Matt Porter <mporter@kernel.crashing.org>
+ * Copyright 2004-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __PPC_PLATFORMS_PPC440SPE_H
+#define __PPC_PLATFORMS_PPC440SPE_H
+
+#include <linux/config.h>
+
+#include <asm/ibm44x.h>
+
+/* UART */
+#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
+#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
+#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
+#define UART0_INT		0
+#define UART1_INT		1
+#define UART2_INT		37
+
+/* Clock and Power Management */
+#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
+#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
+#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
+#define IBM_CPM_CPU		    0x02000000	/* processor core */
+#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
+#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
+#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
+#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
+#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
+#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
+#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
+#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
+#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
+#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
+#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
+#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
+#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
+#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
+#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
+#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
+#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
+#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
+
+#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
+				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
+				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
+				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
+				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
+				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
+			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
+#endif /* __PPC_PLATFORMS_PPC440SP_H */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
index d8019eec4704..281b4a2ffb96 100644
--- a/arch/ppc/platforms/4xx/sycamore.c
+++ b/arch/ppc/platforms/4xx/sycamore.c
@@ -88,9 +88,6 @@ ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 void __init
 sycamore_setup_arch(void)
 {
-#define SYCAMORE_PS2_BASE	0xF0100000
-#define SYCAMORE_FPGA_BASE	0xF0300000
-
 	void *fpga_brdc;
 	unsigned char fpga_brdc_data;
 	void *fpga_enable;
@@ -100,7 +97,7 @@ sycamore_setup_arch(void)
 
 	ppc4xx_setup_arch();
 
-	ibm_ocp_set_emac(0, 1);
+	ibm_ocp_set_emac(0, 0);
 
 	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
 	if (!kb_data) {
@@ -111,7 +108,7 @@ sycamore_setup_arch(void)
 
 	kb_cs = kb_data + 1;
 
-	fpga_status = ioremap(SYCAMORE_FPGA_BASE, 8);
+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
 	if (!fpga_status) {
 		printk(KERN_CRIT
 		       "sycamore_setup_arch() fpga_status ioremap failed\n");
diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
index 3e7b4e2c8c57..1cd6c824fd62 100644
--- a/arch/ppc/platforms/4xx/sycamore.h
+++ b/arch/ppc/platforms/4xx/sycamore.h
@@ -1,67 +1,52 @@
 /*
  * arch/ppc/platforms/4xx/sycamore.h
  *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 405GPr "Sycamore" evaluation board.
+ * Sycamore board definitions
  *
- * Author: Armin Kuster <akuster@mvista.com>
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * 	Armin Kuster <akuster@mvista.com>
+ *	2000 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __ASM_SYCAMORE_H__
 #define __ASM_SYCAMORE_H__
 
+#include <linux/config.h>
 #include <platforms/4xx/ibm405gpr.h>
+#include <asm/ppcboot.h>
 
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Sycamore" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-	unsigned char	 bi_s_version[4];	/* Version of this structure */
-	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-
-/* Memory map for the IBM "Sycamore" 405GP evaluation board.
+/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
  * Generic 4xx plus RTC.
  */
 
-extern void *sycamore_rtc_base;
 #define SYCAMORE_RTC_PADDR	((uint)0xf0000000)
 #define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR
-#define SYCAMORE_RTC_SIZE		((uint)8*1024)
+#define SYCAMORE_RTC_SIZE	((uint)8*1024)
 
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD		201600
-#else
 #define BASE_BAUD		691200
-#endif
 
-#define SYCAMORE_PS2_BASE		0xF0100000
-#define SYCAMORE_FPGA_BASE	0xF0300000
+#define SYCAMORE_PS2_BASE	0xF0100000
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
 
 #define PPC4xx_MACHINE_NAME	"IBM Sycamore"
 
-#endif /* !__ASSEMBLY__ */
 #endif /* __ASM_SYCAMORE_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
index a33eda4b7489..74cb33182d9f 100644
--- a/arch/ppc/platforms/4xx/walnut.c
+++ b/arch/ppc/platforms/4xx/walnut.c
@@ -90,7 +90,7 @@ walnut_setup_arch(void)
 
 	kb_cs = kb_data + 1;
 
-	fpga_status = ioremap(WALNUT_FPGA_BASE, 8);
+	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
 	if (!fpga_status) {
 		printk(KERN_CRIT
 		       "walnut_setup_arch() fpga_status ioremap failed\n");
diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
index 04cfbf3696b9..dcf2691698c0 100644
--- a/arch/ppc/platforms/4xx/walnut.h
+++ b/arch/ppc/platforms/4xx/walnut.h
@@ -1,72 +1,55 @@
 /*
  * arch/ppc/platforms/4xx/walnut.h
  *
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * 405GP "Walnut" evaluation board.
+ * Walnut board definitions
  *
- * Authors: Grant Erickson <grant@lcse.umn.edu>, Frank Rowand
- * <frank_rowand@mvista.com>, Debbie Chu <debbie_chu@mvista.com> or
- * source@mvista.com
+ * Copyright (c) 2005 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
  *
- * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * Based on original work by
+ * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *	Frank Rowand <frank_rowand@mvista.com>
+ *	Debbie Chu <debbie_chu@mvista.com>
+ *	2000 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
  */
 
 #ifdef __KERNEL__
 #ifndef __ASM_WALNUT_H__
 #define __ASM_WALNUT_H__
 
-/* We have a 405GP core */
+#include <linux/config.h>
 #include <platforms/4xx/ibm405gp.h>
-
-#ifndef __ASSEMBLY__
-/*
- * Data structure defining board information maintained by the boot
- * ROM on IBM's "Walnut" evaluation board. An effort has been made to
- * keep the field names consistent with the 8xx 'bd_t' board info
- * structures.
- */
-
-typedef struct board_info {
-	unsigned char	 bi_s_version[4];	/* Version of this structure */
-	unsigned char	 bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned char	 bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
+#include <asm/ppcboot.h>
 
 /* Memory map for the IBM "Walnut" 405GP evaluation board.
  * Generic 4xx plus RTC.
  */
 
-extern void *walnut_rtc_base;
 #define WALNUT_RTC_PADDR	((uint)0xf0000000)
 #define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR
 #define WALNUT_RTC_SIZE		((uint)8*1024)
 
-#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
-#define BASE_BAUD		201600
-#else
 #define BASE_BAUD		691200
-#endif
 
 #define WALNUT_PS2_BASE		0xF0100000
-#define WALNUT_FPGA_BASE	0xF0300000
+
+/* Flash */
+#define PPC40x_FPGA_BASE	0xF0300000
+#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
+#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
+#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
+#define PPC40x_FLASH_LOW	0xFFF00000
+#define PPC40x_FLASH_HIGH	0xFFF80000
+#define PPC40x_FLASH_SIZE	0x80000
+#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE
 
 #define PPC4xx_MACHINE_NAME	"IBM Walnut"
 
-#endif /* !__ASSEMBLY__ */
 #endif /* __ASM_WALNUT_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
new file mode 100644
index 000000000000..e60f4bd437ec
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.c
@@ -0,0 +1,395 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.c
+ *
+ * Yucca board specific routines
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/reboot.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/types.h>
+#include <linux/major.h>
+#include <linux/blkdev.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/ide.h>
+#include <linux/initrd.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/ocp.h>
+#include <asm/pci-bridge.h>
+#include <asm/time.h>
+#include <asm/todc.h>
+#include <asm/bootinfo.h>
+#include <asm/ppc4xx_pic.h>
+#include <asm/ppcboot.h>
+
+#include <syslib/ibm44x_common.h>
+#include <syslib/ibm440gx_common.h>
+#include <syslib/ibm440sp_common.h>
+#include <syslib/ppc440spe_pcie.h>
+
+extern bd_t __res;
+
+static struct ibm44x_clocks clocks __initdata;
+
+static void __init
+yucca_calibrate_decr(void)
+{
+	unsigned int freq;
+
+	if (mfspr(SPRN_CCR1) & CCR1_TCS)
+		freq = YUCCA_TMR_CLK;
+	else
+		freq = clocks.cpu;
+
+	ibm44x_calibrate_decr(freq);
+}
+
+static int
+yucca_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: AMCC\n");
+	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
+
+	return 0;
+}
+
+static enum {
+	HOSE_UNKNOWN,
+	HOSE_PCIX,
+	HOSE_PCIE0,
+	HOSE_PCIE1,
+	HOSE_PCIE2
+} hose_type[4];
+
+static inline int
+yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
+
+	if (hose_type[hose->index] == HOSE_PCIX) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE0) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 96, 97, 98, 99 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE1) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 100, 101, 102, 103 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	} else if (hose_type[hose->index] == HOSE_PCIE2) {
+		static char pci_irq_table[][4] =
+		/*
+		 *	PCI IDSEL/INTPIN->INTLINE
+		 *	  A   B   C   D
+		 */
+		{
+			{ 104, 105, 106, 107 },
+		};
+		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
+		return PCI_IRQ_TABLE_LOOKUP;
+	}
+	return -1;
+}
+
+static void __init yucca_set_emacdata(void)
+{
+	struct ocp_def *def;
+	struct ocp_func_emac_data *emacdata;
+
+	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
+	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
+	emacdata = def->additions;
+	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
+	emacdata->phy_mode = PHY_MODE_GMII;
+	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
+}
+
+static int __init yucca_pcie_card_present(int port)
+{
+   void __iomem *pcie_fpga_base;
+   u16 reg;
+
+   pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
+   reg = in_be16(pcie_fpga_base + FPGA_REG1C);
+   iounmap(pcie_fpga_base);
+
+   switch(port) {
+   case 0: return !(reg & FPGA_REG1C_PE0_PRSNT);
+   case 1: return !(reg & FPGA_REG1C_PE1_PRSNT);
+   case 2: return !(reg & FPGA_REG1C_PE2_PRSNT);
+   default: return 0;
+   }
+}
+
+/*
+ * For the given slot, set rootpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * and turn off reset.
+ */
+static void __init yucca_setup_pcie_fpga_rootpoint(int port)
+{
+	void __iomem *pcie_reg_fpga_base;
+	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+	pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
+
+	switch(port) {
+	case 0:
+		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
+		endpoint    = 0;
+		power 	    = FPGA_REG1A_PE0_PWRON;
+		green_led   = FPGA_REG1A_PE0_GLED;
+		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE0_YLED;
+		reset_off   = FPGA_REG1C_PE0_PERST;
+		break;
+	case 1:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
+		power 	    = FPGA_REG1A_PE1_PWRON;
+		green_led   = FPGA_REG1A_PE1_GLED;
+		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE1_YLED;
+		reset_off   = FPGA_REG1C_PE1_PERST;
+		break;
+	case 2:
+		rootpoint   = 0;
+		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
+		power 	    = FPGA_REG1A_PE2_PWRON;
+		green_led   = FPGA_REG1A_PE2_GLED;
+		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
+		yellow_led  = FPGA_REG1A_PE2_YLED;
+		reset_off   = FPGA_REG1C_PE2_PERST;
+		break;
+
+	default:
+		return;
+	}
+
+	out_be16(pcie_reg_fpga_base + FPGA_REG1A,
+		 ~(power | clock | green_led) &
+		 (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A)));
+	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
+		 ~(endpoint | reset_off) &
+		 (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C)));
+
+	/*
+	 * Leave device in reset for a while after powering on the
+	 * slot to give it a chance to initialize.
+	 */
+	mdelay(250);
+
+	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
+		 reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C));
+
+	iounmap(pcie_reg_fpga_base);
+}
+
+static void __init
+yucca_setup_hoses(void)
+{
+	struct pci_controller *hose;
+	char name[20];
+	int i;
+
+	if (0 && ppc440spe_init_pcie()) {
+		printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n");
+		return;
+	}
+
+	for (i = 0; i <= 2; ++i) {
+		if (!yucca_pcie_card_present(i))
+			continue;
+
+		printk(KERN_INFO "PCIE%d: card present\n", i);
+		yucca_setup_pcie_fpga_rootpoint(i);
+		if (ppc440spe_init_pcie_rootport(i)) {
+			printk(KERN_WARNING "PCIE%d: initialization failed\n", i);
+			continue;
+		}
+
+		hose = pcibios_alloc_controller();
+		if (!hose)
+			return;
+
+		sprintf(name, "PCIE%d host bridge", i);
+		pci_init_resource(&hose->io_resource,
+				  YUCCA_PCIX_LOWER_IO,
+				  YUCCA_PCIX_UPPER_IO,
+				  IORESOURCE_IO,
+				  name);
+
+		hose->mem_space.start = YUCCA_PCIE_LOWER_MEM +
+			i * YUCCA_PCIE_MEM_SIZE;
+		hose->mem_space.end   = hose->mem_space.start +
+			YUCCA_PCIE_MEM_SIZE - 1;
+
+		pci_init_resource(&hose->mem_resources[0],
+				  hose->mem_space.start,
+				  hose->mem_space.end,
+				  IORESOURCE_MEM,
+				  name);
+
+		hose->first_busno = 0;
+		hose->last_busno  = 15;
+		hose_type[hose->index] = HOSE_PCIE0 + i;
+
+		ppc440spe_setup_pcie(hose, i);
+		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+	}
+
+	ppc_md.pci_swizzle = common_swizzle;
+	ppc_md.pci_map_irq = yucca_map_irq;
+}
+
+TODC_ALLOC();
+
+static void __init
+yucca_early_serial_map(void)
+{
+	struct uart_port port;
+
+	/* Setup ioremapped serial port access */
+	memset(&port, 0, sizeof(port));
+	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
+	port.irq = UART0_INT;
+	port.uartclk = clocks.uart0;
+	port.regshift = 0;
+	port.iotype = SERIAL_IO_MEM;
+	port.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+	port.line = 0;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 0 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
+	port.irq = UART1_INT;
+	port.uartclk = clocks.uart1;
+	port.line = 1;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 1 failed\n");
+	}
+
+	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
+	port.irq = UART2_INT;
+	port.uartclk = BASE_BAUD;
+	port.line = 2;
+
+	if (early_serial_setup(&port) != 0) {
+		printk("Early serial init of port 2 failed\n");
+	}
+}
+
+static void __init
+yucca_setup_arch(void)
+{
+	yucca_set_emacdata();
+
+#if !defined(CONFIG_BDI_SWITCH)
+	/*
+	 * The Abatron BDI JTAG debugger does not tolerate others
+	 * mucking with the debug registers.
+	 */
+	mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
+#endif
+
+	/*
+	 * Determine various clocks.
+	 * To be completely correct we should get SysClk
+	 * from FPGA, because it can be changed by on-board switches
+	 * --ebs
+	 */
+	/* 440GX and 440SPe clocking is the same - rd */
+	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
+	ocp_sys_info.opb_bus_freq = clocks.opb;
+
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000/HZ;
+
+	/* Setup PCIXn host bridges */
+	yucca_setup_hoses();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (initrd_start)
+		ROOT_DEV = Root_RAM0;
+	else
+#endif
+#ifdef CONFIG_ROOT_NFS
+		ROOT_DEV = Root_NFS;
+#else
+		ROOT_DEV = Root_HDA1;
+#endif
+
+	yucca_early_serial_map();
+
+	/* Identify the system */
+	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
+}
+
+void __init platform_init(unsigned long r3, unsigned long r4,
+		unsigned long r5, unsigned long r6, unsigned long r7)
+{
+	ibm44x_platform_init(r3, r4, r5, r6, r7);
+
+	ppc_md.setup_arch = yucca_setup_arch;
+	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
+	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
+	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
+
+	ppc_md.calibrate_decr = yucca_calibrate_decr;
+#ifdef CONFIG_KGDB
+	ppc_md.early_serial_map = yucca_early_serial_map;
+#endif
+}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
new file mode 100644
index 000000000000..01a4afea1514
--- /dev/null
+++ b/arch/ppc/platforms/4xx/yucca.h
@@ -0,0 +1,111 @@
+/*
+ * arch/ppc/platforms/4xx/yucca.h
+ *
+ * Yucca board definitions
+ *
+ * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
+ *
+ * Copyright 2004-2005 MontaVista Software Inc.
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_YUCCA_H__
+#define __ASM_YUCCA_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/ppc440spe.h>
+
+/* F/W TLB mapping used in bootloader glue to reset EMAC */
+#define PPC44x_EMAC0_MR0	0xa0000800
+
+/* Location of MAC addresses in PIBS image */
+#define PIBS_FLASH_BASE		0xffe00000
+#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
+
+/* External timer clock frequency */
+#define YUCCA_TMR_CLK		25000000
+
+/*
+ * FPGA registers
+ */
+#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
+#define YUCCA_FPGA_REG_SIZE			0x24
+
+#define FPGA_REG1A				0x1a
+
+#define FPGA_REG1A_PE0_GLED			0x8000
+#define FPGA_REG1A_PE1_GLED			0x4000
+#define FPGA_REG1A_PE2_GLED			0x2000
+#define FPGA_REG1A_PE0_YLED			0x1000
+#define FPGA_REG1A_PE1_YLED			0x0800
+#define FPGA_REG1A_PE2_YLED			0x0400
+#define FPGA_REG1A_PE0_PWRON			0x0200
+#define FPGA_REG1A_PE1_PWRON			0x0100
+#define FPGA_REG1A_PE2_PWRON			0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
+#define FPGA_REG1A_PE_SPREAD0			0x0008
+#define FPGA_REG1A_PE_SPREAD1			0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
+
+#define FPGA_REG1C				0x1c
+
+#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
+#define FPGA_REG1C_PE1_ENDPOINT			0x4000
+#define FPGA_REG1C_PE2_ENDPOINT			0x2000
+#define FPGA_REG1C_PE0_PRSNT			0x1000
+#define FPGA_REG1C_PE1_PRSNT			0x0800
+#define FPGA_REG1C_PE2_PRSNT			0x0400
+#define FPGA_REG1C_PE0_WAKE			0x0080
+#define FPGA_REG1C_PE1_WAKE			0x0040
+#define FPGA_REG1C_PE2_WAKE			0x0020
+#define FPGA_REG1C_PE0_PERST			0x0010
+#define FPGA_REG1C_PE1_PERST			0x0008
+#define FPGA_REG1C_PE2_PERST			0x0004
+
+/*
+ * Serial port defines
+ */
+#define RS_TABLE_SIZE	3
+
+/* PIBS defined UART mappings, used before early_serial_setup */
+#define UART0_IO_BASE	0xa0000200
+#define UART1_IO_BASE	0xa0000300
+#define UART2_IO_BASE	0xa0000600
+
+#define BASE_BAUD	11059200
+#define STD_UART_OP(num)					\
+	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
+		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
+		iomem_base: (void*)UART##num##_IO_BASE,		\
+		io_type: SERIAL_IO_MEM},
+
+#define SERIAL_PORT_DFNS	\
+	STD_UART_OP(0)		\
+	STD_UART_OP(1)		\
+	STD_UART_OP(2)
+
+/* PCI support */
+#define YUCCA_PCIX_LOWER_IO	0x00000000
+#define YUCCA_PCIX_UPPER_IO	0x0000ffff
+#define YUCCA_PCIX_LOWER_MEM	0x80000000
+#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
+#define YUCCA_PCIE_LOWER_MEM	0x90000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+
+#define YUCCA_PCIX_MEM_SIZE	0x10000000
+#define YUCCA_PCIX_MEM_OFFSET	0x00000000
+#define YUCCA_PCIE_MEM_SIZE	0x10000000
+#define YUCCA_PCIE_MEM_OFFSET	0x00000000
+
+#endif				/* __ASM_YUCCA_H__ */
+#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
index bd3ac0136756..16ad092d8a06 100644
--- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
+++ b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c
@@ -45,6 +45,8 @@
 
 #include <mm/mmu_decl.h>
 
+#include <syslib/ppc85xx_rio.h>
+
 #include <platforms/85xx/mpc85xx_ads_common.h>
 
 #ifndef CONFIG_PCI
@@ -189,3 +191,11 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
 }
 
 #endif /* CONFIG_PCI */
+
+#ifdef CONFIG_RAPIDIO
+void platform_rio_init(void)
+{
+	/* 512MB RIO LAW at 0xc0000000 */
+	mpc85xx_rio_setup(0xc0000000, 0x20000000);
+}
+#endif /* CONFIG_RAPIDIO */
diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c
index 1e1b85f8193a..15ce9d070634 100644
--- a/arch/ppc/platforms/85xx/stx_gp3.c
+++ b/arch/ppc/platforms/85xx/stx_gp3.c
@@ -37,6 +37,7 @@
 #include <linux/module.h>
 #include <linux/fsl_devices.h>
 #include <linux/interrupt.h>
+#include <linux/rio.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -57,6 +58,7 @@
 
 #include <syslib/cpm2_pic.h>
 #include <syslib/ppc85xx_common.h>
+#include <syslib/ppc85xx_rio.h>
 
 
 unsigned char __res[sizeof(bd_t)];
@@ -273,6 +275,18 @@ int mpc85xx_exclude_device(u_char bus, u_char devfn)
 }
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_RAPIDIO
+void
+platform_rio_init(void)
+{
+	/*
+	 * The STx firmware configures the RapidIO Local Access Window
+	 * at 0xc0000000 with a size of 512MB.
+	 */
+	mpc85xx_rio_setup(0xc0000000, 0x20000000);
+}
+#endif /* CONFIG_RAPIDIO */
+
 void __init
 platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	      unsigned long r6, unsigned long r7)
diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c
index b1324564456e..b9d844f88c2b 100644
--- a/arch/ppc/platforms/ev64360.c
+++ b/arch/ppc/platforms/ev64360.c
@@ -52,6 +52,8 @@ static u32		ev64360_bus_frequency;
 
 unsigned char	__res[sizeof(bd_t)];
 
+TODC_ALLOC();
+
 static int __init
 ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
 {
@@ -182,6 +184,9 @@ ev64360_setup_peripherals(void)
 		 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
 	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
 
+	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
+		ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
+
 	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
 		 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
 	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
@@ -496,6 +501,13 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.power_off = ev64360_power_off;
 	ppc_md.halt = ev64360_halt;
 	ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
+	ppc_md.init = NULL;
+
+	ppc_md.time_init = todc_time_init;
+	ppc_md.set_rtc_time = todc_set_rtc_time;
+	ppc_md.get_rtc_time = todc_get_rtc_time;
+	ppc_md.nvram_read_val = todc_direct_read_val;
+	ppc_md.nvram_write_val = todc_direct_write_val;
 	ppc_md.calibrate_decr = ev64360_calibrate_decr;
 
 #if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index b4ef15b45c4a..5bd33baac243 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_440EP)		+= ibm440gx_common.o
 obj-$(CONFIG_440GP)		+= ibm440gp_common.o
 obj-$(CONFIG_440GX)		+= ibm440gx_common.o
 obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
+obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
 ifeq ($(CONFIG_4xx),y)
 ifeq ($(CONFIG_VIRTEX_II_PRO),y)
 obj-$(CONFIG_40x)		+= xilinx_pic.o
@@ -32,6 +33,7 @@ obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
 obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
 ifeq ($(CONFIG_40x),y)
 obj-$(CONFIG_PCI)		+= pci_auto.o ppc405_pci.o
+obj-$(CONFIG_RAPIDIO)		+= ppc85xx_rio.o
 endif
 endif
 obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
@@ -46,12 +48,14 @@ obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
 obj-$(CONFIG_EBONY)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
+obj-$(CONFIG_EV64360)		+= todc_time.o
 obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
 obj-$(CONFIG_GEMINI)		+= open_pic.o
 obj-$(CONFIG_GT64260)		+= gt64260_pic.o
 obj-$(CONFIG_LOPEC)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_HDPU)		+= pci_auto.o
 obj-$(CONFIG_LUAN)		+= pci_auto.o todc_time.o
+obj-$(CONFIG_YUCCA)		+= pci_auto.o todc_time.o
 obj-$(CONFIG_KATANA)		+= pci_auto.o
 obj-$(CONFIG_MV64360)		+= mv64360_pic.o
 obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
index 417d4cff77a0..cdafda127d81 100644
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ b/arch/ppc/syslib/ibm440sp_common.c
@@ -1,7 +1,7 @@
 /*
  * arch/ppc/syslib/ibm440sp_common.c
  *
- * PPC440SP system library
+ * PPC440SP/PPC440SPe system library
  *
  * Matt Porter <mporter@kernel.crashing.org>
  * Copyright 2002-2005 MontaVista Software Inc.
@@ -35,7 +35,7 @@ unsigned long __init ibm440sp_find_end_of_memory(void)
 	u32 mem_size = 0;
 
 	/* Read two bank sizes and sum */
-	for (i=0; i<2; i++)
+	for (i=0; i< MQ0_NUM_BANKS; i++)
 		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
 			case MQ0_CONFIG_SIZE_8M:
 				mem_size += PPC44x_MEM_SIZE_8M;
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
index 5152c8e41340..71db11d22158 100644
--- a/arch/ppc/syslib/ibm44x_common.c
+++ b/arch/ppc/syslib/ibm44x_common.c
@@ -20,6 +20,7 @@
 #include <linux/types.h>
 #include <linux/serial.h>
 #include <linux/module.h>
+#include <linux/initrd.h>
 
 #include <asm/ibm44x.h>
 #include <asm/mmu.h>
@@ -214,9 +215,20 @@ void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned lo
 /* Called from machine_check_exception */
 void platform_machine_check(struct pt_regs *regs)
 {
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
+	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
+	       mfdcr(DCRN_PLB0_BESRL));
+	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
+	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
+	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
+	       mfdcr(DCRN_PLB1_BESRL));
+#else
     	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
 		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
 		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
+#endif
 	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
 		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
 		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
index 81c83bf98df4..d6d838b16dac 100644
--- a/arch/ppc/syslib/ppc405_pci.c
+++ b/arch/ppc/syslib/ppc405_pci.c
@@ -89,13 +89,6 @@ ppc4xx_find_bridges(void)
 	isa_mem_base = 0;
 	pci_dram_offset = 0;
 
-#if  (PSR_PCI_ARBIT_EN > 1)
-	/* Check if running in slave mode */
-	if ((mfdcr(DCRN_CHPSR) & PSR_PCI_ARBIT_EN) == 0) {
-		printk("Running as PCI slave, kernel PCI disabled !\n");
-		return;
-	}
-#endif
 	/* Setup PCI32 hose */
 	hose_a = pcibios_alloc_controller();
 	if (!hose_a)
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
new file mode 100644
index 000000000000..1509fc1ddfb6
--- /dev/null
+++ b/arch/ppc/syslib/ppc440spe_pcie.c
@@ -0,0 +1,442 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/ibm44x.h>
+
+#include "ppc440spe_pcie.h"
+
+static int
+pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		     int len, u32 *val)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset += devfn << 12;
+
+	/*
+	 * Note: the caller has already checked that offset is
+	 * suitably aligned and that len is 1, 2 or 4.
+	 */
+	switch (len) {
+	case 1:
+		*val = in_8(hose->cfg_data + offset);
+		break;
+	case 2:
+		*val = in_le16(hose->cfg_data + offset);
+		break;
+	default:
+		*val = in_le32(hose->cfg_data + offset);
+		break;
+	}
+
+	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+		      int len, u32 val)
+{
+	struct pci_controller *hose = bus->sysdata;
+
+	if (PCI_SLOT(devfn) != 1)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	offset += devfn << 12;
+
+	switch (len) {
+	case 1:
+		out_8(hose->cfg_data + offset, val);
+		break;
+	case 2:
+		out_le16(hose->cfg_data + offset, val);
+		break;
+	default:
+		out_le32(hose->cfg_data + offset, val);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pcie_pci_ops =
+{
+	.read  = pcie_read_config,
+	.write = pcie_write_config
+};
+
+enum {
+	PTYPE_ENDPOINT		= 0x0,
+	PTYPE_LEGACY_ENDPOINT	= 0x1,
+	PTYPE_ROOT_PORT		= 0x4,
+
+	LNKW_X1			= 0x1,
+	LNKW_X4			= 0x4,
+	LNKW_X8			= 0x8
+};
+
+static void check_error(void)
+{
+	u32 valPE0, valPE1, valPE2;
+
+	/* SDR0_PEGPLLLCT1 reset */
+	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
+		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
+	}
+
+	valPE0 = SDR_READ(PESDR0_RCSSET);
+	valPE1 = SDR_READ(PESDR1_RCSSET);
+	valPE2 = SDR_READ(PESDR2_RCSSET);
+
+	/* SDR0_PExRCSSET rstgu */
+	if ( !(valPE0 & 0x01000000) ||
+	     !(valPE1 & 0x01000000) ||
+	     !(valPE2 & 0x01000000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
+	}
+
+	/* SDR0_PExRCSSET rstdl */
+	if ( !(valPE0 & 0x00010000) ||
+	     !(valPE1 & 0x00010000) ||
+	     !(valPE2 & 0x00010000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
+	}
+
+	/* SDR0_PExRCSSET rstpyn */
+	if ( (valPE0 & 0x00001000) ||
+	     (valPE1 & 0x00001000) ||
+	     (valPE2 & 0x00001000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
+	}
+
+	/* SDR0_PExRCSSET hldplb */
+	if ( (valPE0 & 0x10000000) ||
+	     (valPE1 & 0x10000000) ||
+	     (valPE2 & 0x10000000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
+	}
+
+	/* SDR0_PExRCSSET rdy */
+	if ( (valPE0 & 0x00100000) ||
+	     (valPE1 & 0x00100000) ||
+	     (valPE2 & 0x00100000)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
+	}
+
+	/* SDR0_PExRCSSET shutdown */
+	if ( (valPE0 & 0x00000100) ||
+	     (valPE1 & 0x00000100) ||
+	     (valPE2 & 0x00000100)) {
+		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
+	}
+}
+
+/*
+ * Initialize PCI Express core as described in User Manual section 27.12.1
+ */
+int ppc440spe_init_pcie(void)
+{
+	/* Set PLL clock receiver to LVPECL */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
+
+	check_error();
+
+	printk(KERN_INFO "PCIE initialization OK\n");
+
+	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
+		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
+		       SDR_READ(PESDR0_PLLLCT2));
+
+	/* De-assert reset of PCIe PLL, wait for lock */
+	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
+	udelay(3);
+
+	return 0;
+}
+
+int ppc440spe_init_pcie_rootport(int port)
+{
+	static int core_init;
+	void __iomem *utl_base;
+	u32 val = 0;
+	int i;
+
+	if (!core_init) {
+		++core_init;
+		i = ppc440spe_init_pcie();
+		if (i)
+			return i;
+	}
+
+	/*
+	 * Initialize various parts of the PCI Express core for our port:
+	 *
+	 * - Set as a root port and enable max width
+	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
+	 * - Set up UTL configuration.
+	 * - Increase SERDES drive strength to levels suggested by AMCC.
+	 * - De-assert RSTPYN, RSTDL and RSTGU.
+	 */
+	switch (port) {
+	case 0:
+		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
+
+		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
+		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
+
+		SDR_WRITE(PESDR0_RCSSET,
+			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 1:
+		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+
+		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
+
+		SDR_WRITE(PESDR1_RCSSET,
+			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+
+	case 2:
+		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
+
+		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
+		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
+
+		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
+		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
+
+		SDR_WRITE(PESDR2_RCSSET,
+			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
+		break;
+	}
+
+	mdelay(1000);
+
+	switch (port) {
+	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
+	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
+	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
+	}
+
+	if (!(val & (1 << 20)))
+		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
+	else
+		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
+
+	switch (port) {
+	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
+	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
+	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
+	}
+
+	/*
+	 * Map UTL registers at 0xc_1000_0n00
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
+		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
+		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
+	}
+
+	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
+
+	/*
+	 * Set buffer allocations and then assert VRB and TXE.
+	 */
+	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
+	out_be32(utl_base + PEUTL_INTR,    0x02000000);
+	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
+	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
+	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
+	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
+	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
+
+	iounmap(utl_base);
+
+	/*
+	 * We map PCI Express configuration access into the 512MB regions
+	 *     PCIE0: 0xc_4000_0000
+	 *     PCIE1: 0xc_8000_0000
+	 *     PCIE2: 0xc_c000_0000
+	 */
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 1:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
+		break;
+
+	case 2:
+		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
+		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
+		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
+		break;
+	}
+
+	/*
+	 * Check for VC0 active and assert RDY.
+	 */
+	switch (port) {
+	case 0:
+		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
+		break;
+	case 1:
+		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
+		break;
+	case 2:
+		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
+			printk(KERN_WARNING "PCIE0: VC0 not active\n");
+		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
+		break;
+	}
+
+#if 0
+	/* Dump all config regs */
+	for (i = 0x300; i <= 0x320; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x340; i <= 0x353; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x370; i <= 0x383; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x3a0; i <= 0x3a2; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+	for (i = 0x3c0; i <= 0x3c3; ++i)
+		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
+#endif
+
+	mdelay(100);
+
+	return 0;
+}
+
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
+{
+	void __iomem *mbase;
+
+	/*
+	 * Map 16MB, which is enough for 4 bits of bus #
+	 */
+	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
+				   1 << 24);
+	hose->ops = &pcie_pci_ops;
+
+	/*
+	 * Set bus numbers on our root port
+	 */
+	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
+	out_8(mbase + PCI_PRIMARY_BUS, 0);
+	out_8(mbase + PCI_SECONDARY_BUS, 0);
+
+	/*
+	 * Set up outbound translation to hose->mem_space from PLB
+	 * addresses at an offset of 0xd_0000_0000.  We set the low
+	 * bits of the mask to 11 to turn off splitting into 8
+	 * subregions and to enable the outbound translation.
+	 */
+	out_le32(mbase + PECFG_POM0LAH, 0);
+	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
+
+	switch (port) {
+	case 0:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+		break;
+	case 1:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+
+		break;
+	case 2:
+		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
+		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
+		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
+		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
+		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
+		break;
+	}
+
+	/* Set up 16GB inbound memory window at 0 */
+	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
+	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
+	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
+	out_le32(mbase + PECFG_BAR0LMPA, 0);
+	out_le32(mbase + PECFG_PIM0LAL, 0);
+	out_le32(mbase + PECFG_PIM0LAH, 0);
+	out_le32(mbase + PECFG_PIMEN, 0x1);
+
+	/* Enable I/O, Mem, and Busmaster cycles */
+	out_le16(mbase + PCI_COMMAND,
+		 in_le16(mbase + PCI_COMMAND) |
+		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	iounmap(mbase);
+}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
new file mode 100644
index 000000000000..55b765ad3272
--- /dev/null
+++ b/arch/ppc/syslib/ppc440spe_pcie.h
@@ -0,0 +1,149 @@
+/*
+ * Copyright (c) 2005 Cisco Systems.  All rights reserved.
+ * Roland Dreier <rolandd@cisco.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
+#define __PPC_SYSLIB_PPC440SPE_PCIE_H
+
+#define DCRN_SDR0_CFGADDR	0x00e
+#define DCRN_SDR0_CFGDATA	0x00f
+
+#define DCRN_PCIE0_BASE		0x100
+#define DCRN_PCIE1_BASE		0x120
+#define DCRN_PCIE2_BASE		0x140
+#define PCIE0			DCRN_PCIE0_BASE
+#define PCIE1			DCRN_PCIE1_BASE
+#define PCIE2			DCRN_PCIE2_BASE
+
+#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
+#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
+#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
+#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
+#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
+#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
+#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
+#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
+#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
+#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
+#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
+#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
+#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
+#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
+
+/*
+ * System DCRs (SDRs)
+ */
+#define PESDR0_PLLLCT1		0x03a0
+#define PESDR0_PLLLCT2		0x03a1
+#define PESDR0_PLLLCT3		0x03a2
+
+#define PESDR0_UTLSET1		0x0300
+#define PESDR0_UTLSET2		0x0301
+#define PESDR0_DLPSET		0x0302
+#define PESDR0_LOOP		0x0303
+#define PESDR0_RCSSET		0x0304
+#define PESDR0_RCSSTS		0x0305
+#define PESDR0_HSSL0SET1	0x0306
+#define PESDR0_HSSL0SET2	0x0307
+#define PESDR0_HSSL0STS		0x0308
+#define PESDR0_HSSL1SET1	0x0309
+#define PESDR0_HSSL1SET2	0x030a
+#define PESDR0_HSSL1STS		0x030b
+#define PESDR0_HSSL2SET1	0x030c
+#define PESDR0_HSSL2SET2	0x030d
+#define PESDR0_HSSL2STS		0x030e
+#define PESDR0_HSSL3SET1	0x030f
+#define PESDR0_HSSL3SET2	0x0310
+#define PESDR0_HSSL3STS		0x0311
+#define PESDR0_HSSL4SET1	0x0312
+#define PESDR0_HSSL4SET2	0x0313
+#define PESDR0_HSSL4STS		0x0314
+#define PESDR0_HSSL5SET1	0x0315
+#define PESDR0_HSSL5SET2	0x0316
+#define PESDR0_HSSL5STS		0x0317
+#define PESDR0_HSSL6SET1	0x0318
+#define PESDR0_HSSL6SET2	0x0319
+#define PESDR0_HSSL6STS		0x031a
+#define PESDR0_HSSL7SET1	0x031b
+#define PESDR0_HSSL7SET2	0x031c
+#define PESDR0_HSSL7STS		0x031d
+#define PESDR0_HSSCTLSET	0x031e
+#define PESDR0_LANE_ABCD	0x031f
+#define PESDR0_LANE_EFGH	0x0320
+
+#define PESDR1_UTLSET1		0x0340
+#define PESDR1_UTLSET2		0x0341
+#define PESDR1_DLPSET		0x0342
+#define PESDR1_LOOP		0x0343
+#define PESDR1_RCSSET		0x0344
+#define PESDR1_RCSSTS		0x0345
+#define PESDR1_HSSL0SET1	0x0346
+#define PESDR1_HSSL0SET2	0x0347
+#define PESDR1_HSSL0STS		0x0348
+#define PESDR1_HSSL1SET1	0x0349
+#define PESDR1_HSSL1SET2	0x034a
+#define PESDR1_HSSL1STS		0x034b
+#define PESDR1_HSSL2SET1	0x034c
+#define PESDR1_HSSL2SET2	0x034d
+#define PESDR1_HSSL2STS		0x034e
+#define PESDR1_HSSL3SET1	0x034f
+#define PESDR1_HSSL3SET2	0x0350
+#define PESDR1_HSSL3STS		0x0351
+#define PESDR1_HSSCTLSET	0x0352
+#define PESDR1_LANE_ABCD	0x0353
+
+#define PESDR2_UTLSET1		0x0370
+#define PESDR2_UTLSET2		0x0371
+#define PESDR2_DLPSET		0x0372
+#define PESDR2_LOOP		0x0373
+#define PESDR2_RCSSET		0x0374
+#define PESDR2_RCSSTS		0x0375
+#define PESDR2_HSSL0SET1	0x0376
+#define PESDR2_HSSL0SET2	0x0377
+#define PESDR2_HSSL0STS		0x0378
+#define PESDR2_HSSL1SET1	0x0379
+#define PESDR2_HSSL1SET2	0x037a
+#define PESDR2_HSSL1STS		0x037b
+#define PESDR2_HSSL2SET1	0x037c
+#define PESDR2_HSSL2SET2	0x037d
+#define PESDR2_HSSL2STS		0x037e
+#define PESDR2_HSSL3SET1	0x037f
+#define PESDR2_HSSL3SET2	0x0380
+#define PESDR2_HSSL3STS		0x0381
+#define PESDR2_HSSCTLSET	0x0382
+#define PESDR2_LANE_ABCD	0x0383
+
+/*
+ * UTL register offsets
+ */
+#define PEUTL_PBBSZ		0x20
+#define PEUTL_OPDBSZ		0x68
+#define PEUTL_IPHBSZ		0x70
+#define PEUTL_IPDBSZ		0x78
+#define PEUTL_OUTTR		0x90
+#define PEUTL_INTR		0x98
+#define PEUTL_PCTL		0xa0
+#define PEUTL_RCIRQEN		0xb8
+
+/*
+ * Config space register offsets
+ */
+#define PECFG_BAR0LMPA		0x210
+#define PECFG_BAR0HMPA		0x214
+#define PECFG_PIMEN		0x33c
+#define PECFG_PIM0LAL		0x340
+#define PECFG_PIM0LAH		0x344
+#define PECFG_POM0LAL		0x380
+#define PECFG_POM0LAH		0x384
+
+int ppc440spe_init_pcie(void);
+int ppc440spe_init_pcie_rootport(int port);
+void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
+
+#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
index 0b435633a0d1..aa4165144ec2 100644
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ b/arch/ppc/syslib/ppc4xx_pic.c
@@ -38,6 +38,7 @@ extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
 #define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
 #define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
 #define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
+#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
 
 #define UIC_HANDLERS(n)							\
 static void ppc4xx_uic##n##_enable(unsigned int irq)			\
@@ -88,7 +89,38 @@ static void ppc4xx_uic##n##_end(unsigned int irq)			\
 	.end 		= ppc4xx_uic##n##_end,				\
 }									\
 
-#if NR_UICS == 3
+#if NR_UICS == 4
+#define ACK_UIC0_PARENT
+#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
+#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
+#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
+UIC_HANDLERS(0);
+UIC_HANDLERS(1);
+UIC_HANDLERS(2);
+UIC_HANDLERS(3);
+
+static int ppc4xx_pic_get_irq(struct pt_regs *regs)
+{
+	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
+	if (uic0 & UIC0_UIC1NC)
+		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
+	else if (uic0 & UIC0_UIC2NC)
+		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
+	else if (uic0 & UIC0_UIC3NC)
+		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
+	else
+		return uic0 ? 32 - ffs(uic0) : -1;
+}
+
+static void __init ppc4xx_pic_impl_init(void)
+{
+	/* Enable cascade interrupts in UIC0 */
+	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
+	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
+	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
+}
+
+#elif NR_UICS == 3
 #define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
 #define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
 #define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
@@ -170,6 +202,9 @@ static struct ppc4xx_uic_impl {
 	{ .decl = DECLARE_UIC(1), .base = UIC1 },
 #if NR_UICS > 2
 	{ .decl = DECLARE_UIC(2), .base = UIC2 },
+#if NR_UICS > 3
+	{ .decl = DECLARE_UIC(3), .base = UIC3 },
+#endif
 #endif
 #endif
 };
diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c
new file mode 100644
index 000000000000..297f3b549177
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_rio.c
@@ -0,0 +1,938 @@
+/*
+ * MPC85xx RapidIO support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+
+#include <asm/io.h>
+
+#define RIO_REGS_BASE		(CCSRBAR + 0xc0000)
+#define RIO_ATMU_REGS_OFFSET	0x10c00
+#define RIO_MSG_REGS_OFFSET	0x11000
+#define RIO_MAINT_WIN_SIZE	0x400000
+#define RIO_DBELL_WIN_SIZE	0x1000
+
+#define RIO_MSG_OMR_MUI		0x00000002
+#define RIO_MSG_OSR_TE		0x00000080
+#define RIO_MSG_OSR_QOI		0x00000020
+#define RIO_MSG_OSR_QFI		0x00000010
+#define RIO_MSG_OSR_MUB		0x00000004
+#define RIO_MSG_OSR_EOMI	0x00000002
+#define RIO_MSG_OSR_QEI		0x00000001
+
+#define RIO_MSG_IMR_MI		0x00000002
+#define RIO_MSG_ISR_TE		0x00000080
+#define RIO_MSG_ISR_QFI		0x00000010
+#define RIO_MSG_ISR_DIQI	0x00000001
+
+#define RIO_MSG_DESC_SIZE	32
+#define RIO_MSG_BUFFER_SIZE	4096
+#define RIO_MIN_TX_RING_SIZE	2
+#define RIO_MAX_TX_RING_SIZE	2048
+#define RIO_MIN_RX_RING_SIZE	2
+#define RIO_MAX_RX_RING_SIZE	2048
+
+#define DOORBELL_DMR_DI		0x00000002
+#define DOORBELL_DSR_TE		0x00000080
+#define DOORBELL_DSR_QFI	0x00000010
+#define DOORBELL_DSR_DIQI	0x00000001
+#define DOORBELL_TID_OFFSET	0x03
+#define DOORBELL_SID_OFFSET	0x05
+#define DOORBELL_INFO_OFFSET	0x06
+
+#define DOORBELL_MESSAGE_SIZE	0x08
+#define DBELL_SID(x)		(*(u8 *)(x + DOORBELL_SID_OFFSET))
+#define DBELL_TID(x)		(*(u8 *)(x + DOORBELL_TID_OFFSET))
+#define DBELL_INF(x)		(*(u16 *)(x + DOORBELL_INFO_OFFSET))
+
+#define is_power_of_2(x)	(((x) & ((x) - 1)) == 0)
+
+struct rio_atmu_regs {
+	u32 rowtar;
+	u32 pad1;
+	u32 rowbar;
+	u32 pad2;
+	u32 rowar;
+	u32 pad3[3];
+};
+
+struct rio_msg_regs {
+	u32 omr;
+	u32 osr;
+	u32 pad1;
+	u32 odqdpar;
+	u32 pad2;
+	u32 osar;
+	u32 odpr;
+	u32 odatr;
+	u32 odcr;
+	u32 pad3;
+	u32 odqepar;
+	u32 pad4[13];
+	u32 imr;
+	u32 isr;
+	u32 pad5;
+	u32 ifqdpar;
+	u32 pad6;
+	u32 ifqepar;
+	u32 pad7[250];
+	u32 dmr;
+	u32 dsr;
+	u32 pad8;
+	u32 dqdpar;
+	u32 pad9;
+	u32 dqepar;
+	u32 pad10[26];
+	u32 pwmr;
+	u32 pwsr;
+	u32 pad11;
+	u32 pwqbar;
+};
+
+struct rio_tx_desc {
+	u32 res1;
+	u32 saddr;
+	u32 dport;
+	u32 dattr;
+	u32 res2;
+	u32 res3;
+	u32 dwcnt;
+	u32 res4;
+};
+
+static u32 regs_win;
+static struct rio_atmu_regs *atmu_regs;
+static struct rio_atmu_regs *maint_atmu_regs;
+static struct rio_atmu_regs *dbell_atmu_regs;
+static u32 dbell_win;
+static u32 maint_win;
+static struct rio_msg_regs *msg_regs;
+
+static struct rio_dbell_ring {
+	void *virt;
+	dma_addr_t phys;
+} dbell_ring;
+
+static struct rio_msg_tx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_TX_RING_SIZE];
+	dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
+	int tx_slot;
+	int size;
+	void *dev_id;
+} msg_tx_ring;
+
+static struct rio_msg_rx_ring {
+	void *virt;
+	dma_addr_t phys;
+	void *virt_buffer[RIO_MAX_RX_RING_SIZE];
+	int rx_slot;
+	int size;
+	void *dev_id;
+} msg_rx_ring;
+
+/**
+ * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @index: ID of RapidIO interface
+ * @destid: Destination ID of target device
+ * @data: 16-bit info field of RapidIO doorbell message
+ *
+ * Sends a MPC85xx doorbell message. Returns %0 on success or
+ * %-EINVAL on failure.
+ */
+static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
+{
+	pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
+		 index, destid, data);
+	out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
+	out_be16((void *)(dbell_win), data);
+
+	return 0;
+}
+
+/**
+ * mpc85xx_local_config_read - Generate a MPC85xx local config space read
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be read into
+ *
+ * Generates a MPC85xx local configuration space read. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data)
+{
+	pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
+		 offset);
+	*data = in_be32((void *)(regs_win + offset));
+
+	return 0;
+}
+
+/**
+ * mpc85xx_local_config_write - Generate a MPC85xx local config space write
+ * @index: ID of RapdiIO interface
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @data: Value to be written
+ *
+ * Generates a MPC85xx local configuration space write. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data)
+{
+	pr_debug
+	    ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n",
+	     index, offset, data);
+	out_be32((void *)(regs_win + offset), data);
+
+	return 0;
+}
+
+/**
+ * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Location to be read into
+ *
+ * Generates a MPC85xx read maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len,
+			u32 * val)
+{
+	u8 *data;
+
+	pr_debug
+	    ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n",
+	     index, destid, hopcount, offset, len);
+	out_be32((void *)&maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+	data = (u8 *) maint_win + offset;
+	switch (len) {
+	case 1:
+		*val = in_8((u8 *) data);
+		break;
+	case 2:
+		*val = in_be16((u16 *) data);
+		break;
+	default:
+		*val = in_be32((u32 *) data);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @index: ID of RapdiIO interface
+ * @destid: Destination ID of transaction
+ * @hopcount: Number of hops to target device
+ * @offset: Offset into configuration space
+ * @len: Length (in bytes) of the maintenance transaction
+ * @val: Value to be written
+ *
+ * Generates an MPC85xx write maintenance transaction. Returns %0 on
+ * success or %-EINVAL on failure.
+ */
+static int
+mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset,
+			 int len, u32 val)
+{
+	u8 *data;
+	pr_debug
+	    ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n",
+	     index, destid, hopcount, offset, len, val);
+	out_be32((void *)&maint_atmu_regs->rowtar,
+		 (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
+
+	data = (u8 *) maint_win + offset;
+	switch (len) {
+	case 1:
+		out_8((u8 *) data, val);
+		break;
+	case 2:
+		out_be16((u16 *) data, val);
+		break;
+	default:
+		out_be32((u32 *) data, val);
+		break;
+	}
+
+	return 0;
+}
+
+/**
+ * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue
+ * @mport: Master port with outbound message queue
+ * @rdev: Target of outbound message
+ * @mbox: Outbound mailbox
+ * @buffer: Message to add to outbound queue
+ * @len: Length of message
+ *
+ * Adds the @buffer message to the MPC85xx outbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int
+rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox,
+			void *buffer, size_t len)
+{
+	u32 omr;
+	struct rio_tx_desc *desc =
+	    (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
+	int ret = 0;
+
+	pr_debug
+	    ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n",
+	     rdev->destid, mbox, (int)buffer, len);
+
+	if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	/* Copy and clear rest of buffer */
+	memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
+	if (len < (RIO_MAX_MSG_SIZE - 4))
+		memset((void *)((u32) msg_tx_ring.
+				virt_buffer[msg_tx_ring.tx_slot] + len), 0,
+		       RIO_MAX_MSG_SIZE - len);
+
+	/* Set mbox field for message */
+	desc->dport = mbox & 0x3;
+
+	/* Enable EOMI interrupt, set priority, and set destid */
+	desc->dattr = 0x28000000 | (rdev->destid << 2);
+
+	/* Set transfer size aligned to next power of 2 (in double words) */
+	desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
+
+	/* Set snooping and source buffer address */
+	desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
+
+	/* Increment enqueue pointer */
+	omr = in_be32((void *)&msg_regs->omr);
+	out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
+
+	/* Go to next descriptor */
+	if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
+		msg_tx_ring.tx_slot = 0;
+
+      out:
+	return ret;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
+
+/**
+ * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ * @regs: Register context
+ *
+ * Handles outbound message interrupts. Executes a register outbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t
+mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	int osr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	osr = in_be32((void *)&msg_regs->osr);
+
+	if (osr & RIO_MSG_OSR_TE) {
+		pr_info("RIO: outbound message transmission error\n");
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_QOI) {
+		pr_info("RIO: outbound message queue overflow\n");
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
+		goto out;
+	}
+
+	if (osr & RIO_MSG_OSR_EOMI) {
+		u32 dqp = in_be32((void *)&msg_regs->odqdpar);
+		int slot = (dqp - msg_tx_ring.phys) >> 5;
+		port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot);
+
+		/* Ack the end-of-message interrupt */
+		out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the outbound mailbox ring
+ *
+ * Initializes buffer ring, request the outbound message interrupt,
+ * and enables the outbound message unit. Returns %0 on success and
+ * %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, j, rc = 0;
+
+	if ((entries < RIO_MIN_TX_RING_SIZE) ||
+	    (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize shadow copy ring */
+	msg_tx_ring.dev_id = dev_id;
+	msg_tx_ring.size = entries;
+
+	for (i = 0; i < msg_tx_ring.size; i++) {
+		if (!
+		    (msg_tx_ring.virt_buffer[i] =
+		     dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+					&msg_tx_ring.phys_buffer[i],
+					GFP_KERNEL))) {
+			rc = -ENOMEM;
+			for (j = 0; j < msg_tx_ring.size; j++)
+				if (msg_tx_ring.virt_buffer[j])
+					dma_free_coherent(NULL,
+							  RIO_MSG_BUFFER_SIZE,
+							  msg_tx_ring.
+							  virt_buffer[j],
+							  msg_tx_ring.
+							  phys_buffer[j]);
+			goto out;
+		}
+	}
+
+	/* Initialize outbound message descriptor ring */
+	if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL,
+						    msg_tx_ring.size *
+						    RIO_MSG_DESC_SIZE,
+						    &msg_tx_ring.phys,
+						    GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out_dma;
+	}
+	memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
+	msg_tx_ring.tx_slot = 0;
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
+	out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
+
+	/* Configure for snooping */
+	out_be32((void *)&msg_regs->osar, 0x00000004);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->osr, 0x000000b3);
+
+	/* Hook up outbound message handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0,
+			 "msg_tx", (void *)mport)) < 0)
+		goto out_irq;
+
+	/*
+	 * Configure outbound message unit
+	 *      Snooping
+	 *      Interrupts (all enabled, except QEIE)
+	 *      Chaining mode
+	 *      Disable
+	 */
+	out_be32((void *)&msg_regs->omr, 0x00100220);
+
+	/* Set number of entries */
+	out_be32((void *)&msg_regs->omr,
+		 in_be32((void *)&msg_regs->omr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1);
+
+      out:
+	return rc;
+
+      out_irq:
+	dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  msg_tx_ring.virt, msg_tx_ring.phys);
+
+      out_dma:
+	for (i = 0; i < msg_tx_ring.size; i++)
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  msg_tx_ring.virt_buffer[i],
+				  msg_tx_ring.phys_buffer[i]);
+
+	return rc;
+}
+
+/**
+ * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
+ * @mport: Master port implementing the outbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the outbound message unit, free all buffers, and
+ * frees the outbound message interrupt.
+ */
+void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
+{
+	/* Disable inbound message unit */
+	out_be32((void *)&msg_regs->omr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+			  msg_tx_ring.virt, msg_tx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
+}
+
+/**
+ * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ * @regs: Register context
+ *
+ * Handles inbound message interrupts. Executes a registered inbound
+ * mailbox event handler and acks the interrupt occurence.
+ */
+static irqreturn_t
+mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	int isr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	isr = in_be32((void *)&msg_regs->isr);
+
+	if (isr & RIO_MSG_ISR_TE) {
+		pr_info("RIO: inbound message reception error\n");
+		out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (isr & RIO_MSG_ISR_DIQI) {
+		/*
+		 * We implement *only* mailbox 0, but can receive messages
+		 * for any mailbox/letter to that mailbox destination. So,
+		 * make the callback with an unknown/invalid mailbox number
+		 * argument.
+		 */
+		port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1);
+
+		/* Ack the queueing interrupt */
+		out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @dev_id: Device specific pointer to pass on event
+ * @mbox: Mailbox to open
+ * @entries: Number of entries in the inbound mailbox ring
+ *
+ * Initializes buffer ring, request the inbound message interrupt,
+ * and enables the inbound message unit. Returns %0 on success
+ * and %-EINVAL or %-ENOMEM on failure.
+ */
+int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries)
+{
+	int i, rc = 0;
+
+	if ((entries < RIO_MIN_RX_RING_SIZE) ||
+	    (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	/* Initialize client buffer ring */
+	msg_rx_ring.dev_id = dev_id;
+	msg_rx_ring.size = entries;
+	msg_rx_ring.rx_slot = 0;
+	for (i = 0; i < msg_rx_ring.size; i++)
+		msg_rx_ring.virt_buffer[i] = NULL;
+
+	/* Initialize inbound message ring */
+	if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL,
+						    msg_rx_ring.size *
+						    RIO_MAX_MSG_SIZE,
+						    &msg_rx_ring.phys,
+						    GFP_KERNEL))) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
+	out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->isr, 0x00000091);
+
+	/* Hook up inbound message handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0,
+			 "msg_rx", (void *)mport)) < 0) {
+		dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+				  msg_tx_ring.virt_buffer[i],
+				  msg_tx_ring.phys_buffer[i]);
+		goto out;
+	}
+
+	/*
+	 * Configure inbound message unit:
+	 *      Snooping
+	 *      4KB max message size
+	 *      Unmask all interrupt sources
+	 *      Disable
+	 */
+	out_be32((void *)&msg_regs->imr, 0x001b0060);
+
+	/* Set number of queue entries */
+	out_be32((void *)&msg_regs->imr,
+		 in_be32((void *)&msg_regs->imr) |
+		 ((get_bitmask_order(entries) - 2) << 12));
+
+	/* Now enable the unit */
+	out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1);
+
+      out:
+	return rc;
+}
+
+/**
+ * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Mailbox to close
+ *
+ * Disables the inbound message unit, free all buffers, and
+ * frees the inbound message interrupt.
+ */
+void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
+{
+	/* Disable inbound message unit */
+	out_be32((void *)&msg_regs->imr, 0);
+
+	/* Free ring */
+	dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+			  msg_rx_ring.virt, msg_rx_ring.phys);
+
+	/* Free interrupt */
+	free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
+}
+
+/**
+ * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ * @buf: Buffer to add to inbound queue
+ *
+ * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
+ * %0 on success or %-EINVAL on failure.
+ */
+int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf)
+{
+	int rc = 0;
+
+	pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
+		 msg_rx_ring.rx_slot);
+
+	if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
+		printk(KERN_ERR
+		       "RIO: error adding inbound buffer %d, buffer exists\n",
+		       msg_rx_ring.rx_slot);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
+	if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
+		msg_rx_ring.rx_slot = 0;
+
+      out:
+	return rc;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
+
+/**
+ * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit
+ * @mport: Master port implementing the inbound message unit
+ * @mbox: Inbound mailbox number
+ *
+ * Gets the next available inbound message from the inbound message queue.
+ * A pointer to the message is returned on success or NULL on failure.
+ */
+void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
+{
+	u32 imr;
+	u32 phys_buf, virt_buf;
+	void *buf = NULL;
+	int buf_idx;
+
+	phys_buf = in_be32((void *)&msg_regs->ifqdpar);
+
+	/* If no more messages, then bail out */
+	if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
+		goto out2;
+
+	virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
+	buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
+	buf = msg_rx_ring.virt_buffer[buf_idx];
+
+	if (!buf) {
+		printk(KERN_ERR
+		       "RIO: inbound message copy failed, no buffers\n");
+		goto out1;
+	}
+
+	/* Copy max message size, caller is expected to allocate that big */
+	memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
+
+	/* Clear the available buffer */
+	msg_rx_ring.virt_buffer[buf_idx] = NULL;
+
+      out1:
+	imr = in_be32((void *)&msg_regs->imr);
+	out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
+
+      out2:
+	return buf;
+}
+
+EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
+
+/**
+ * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
+ * @irq: Linux interrupt number
+ * @dev_instance: Pointer to interrupt-specific data
+ * @regs: Register context
+ *
+ * Handles doorbell interrupts. Parses a list of registered
+ * doorbell event handlers and executes a matching event handler.
+ */
+static irqreturn_t
+mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs *regs)
+{
+	int dsr;
+	struct rio_mport *port = (struct rio_mport *)dev_instance;
+
+	dsr = in_be32((void *)&msg_regs->dsr);
+
+	if (dsr & DOORBELL_DSR_TE) {
+		pr_info("RIO: doorbell reception error\n");
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
+		goto out;
+	}
+
+	if (dsr & DOORBELL_DSR_QFI) {
+		pr_info("RIO: doorbell queue full\n");
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
+		goto out;
+	}
+
+	/* XXX Need to check/dispatch until queue empty */
+	if (dsr & DOORBELL_DSR_DIQI) {
+		u32 dmsg =
+		    (u32) dbell_ring.virt +
+		    (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
+		u32 dmr;
+		struct rio_dbell *dbell;
+		int found = 0;
+
+		pr_debug
+		    ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+		     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+
+		list_for_each_entry(dbell, &port->dbells, node) {
+			if ((dbell->res->start <= DBELL_INF(dmsg)) &&
+			    (dbell->res->end >= DBELL_INF(dmsg))) {
+				found = 1;
+				break;
+			}
+		}
+		if (found) {
+			dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg),
+				    DBELL_INF(dmsg));
+		} else {
+			pr_debug
+			    ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
+			     DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
+		}
+		dmr = in_be32((void *)&msg_regs->dmr);
+		out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
+		out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
+	}
+
+      out:
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
+ * @mport: Master port implementing the inbound doorbell unit
+ *
+ * Initializes doorbell unit hardware and inbound DMA buffer
+ * ring. Called from mpc85xx_rio_setup(). Returns %0 on success
+ * or %-ENOMEM on failure.
+ */
+static int mpc85xx_rio_doorbell_init(struct rio_mport *mport)
+{
+	int rc = 0;
+
+	/* Map outbound doorbell window immediately after maintenance window */
+	if (!(dbell_win =
+	      (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
+			    RIO_DBELL_WIN_SIZE))) {
+		printk(KERN_ERR
+		       "RIO: unable to map outbound doorbell window\n");
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	/* Initialize inbound doorbells */
+	if (!(dbell_ring.virt = dma_alloc_coherent(NULL,
+						   512 * DOORBELL_MESSAGE_SIZE,
+						   &dbell_ring.phys,
+						   GFP_KERNEL))) {
+		printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
+		rc = -ENOMEM;
+		iounmap((void *)dbell_win);
+		goto out;
+	}
+
+	/* Point dequeue/enqueue pointers at first entry in ring */
+	out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
+	out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
+
+	/* Clear interrupt status */
+	out_be32((void *)&msg_regs->dsr, 0x00000091);
+
+	/* Hook up doorbell handler */
+	if ((rc =
+	     request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
+			 "dbell_rx", (void *)mport) < 0)) {
+		iounmap((void *)dbell_win);
+		dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+				  dbell_ring.virt, dbell_ring.phys);
+		printk(KERN_ERR
+		       "MPC85xx RIO: unable to request inbound doorbell irq");
+		goto out;
+	}
+
+	/* Configure doorbells for snooping, 512 entries, and enable */
+	out_be32((void *)&msg_regs->dmr, 0x00108161);
+
+      out:
+	return rc;
+}
+
+static char *cmdline = NULL;
+
+static int mpc85xx_rio_get_hdid(int index)
+{
+	/* XXX Need to parse multiple entries in some format */
+	if (!cmdline)
+		return -1;
+
+	return simple_strtol(cmdline, NULL, 0);
+}
+
+static int mpc85xx_rio_get_cmdline(char *s)
+{
+	if (!s)
+		return 0;
+
+	cmdline = s;
+	return 1;
+}
+
+__setup("riohdid=", mpc85xx_rio_get_cmdline);
+
+/**
+ * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
+ * @law_start: Starting physical address of RapidIO LAW
+ * @law_size: Size of RapidIO LAW
+ *
+ * Initializes MPC85xx RapidIO hardware interface, configures
+ * master port with system-specific info, and registers the
+ * master port with the RapidIO subsystem.
+ */
+void mpc85xx_rio_setup(int law_start, int law_size)
+{
+	struct rio_ops *ops;
+	struct rio_mport *port;
+
+	ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
+	ops->lcread = mpc85xx_local_config_read;
+	ops->lcwrite = mpc85xx_local_config_write;
+	ops->cread = mpc85xx_rio_config_read;
+	ops->cwrite = mpc85xx_rio_config_write;
+	ops->dsend = mpc85xx_rio_doorbell_send;
+
+	port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
+	port->id = 0;
+	port->index = 0;
+	INIT_LIST_HEAD(&port->dbells);
+	port->iores.start = law_start;
+	port->iores.end = law_start + law_size;
+	port->iores.flags = IORESOURCE_MEM;
+
+	rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
+	rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
+	rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
+	strcpy(port->name, "RIO0 mport");
+
+	port->ops = ops;
+	port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
+
+	rio_register_mport(port);
+
+	regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
+	atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET);
+	maint_atmu_regs = atmu_regs + 1;
+	dbell_atmu_regs = atmu_regs + 2;
+	msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
+
+	/* Configure maintenance transaction window */
+	out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
+	out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
+
+	maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
+
+	/* Configure outbound doorbell window */
+	out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
+	out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
+	mpc85xx_rio_doorbell_init(port);
+}
diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h
new file mode 100644
index 000000000000..c0827a2c3eec
--- /dev/null
+++ b/arch/ppc/syslib/ppc85xx_rio.h
@@ -0,0 +1,21 @@
+/*
+ * MPC85xx RapidIO definitions
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
+#define __PPC_SYSLIB_PPC85XX_RIO_H
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+extern void mpc85xx_rio_setup(int law_start, int law_size);
+
+#endif				/* __PPC_SYSLIB_PPC85XX_RIO_H */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
index 62ee86e80711..603f01190816 100644
--- a/arch/ppc/syslib/ppc_sys.c
+++ b/arch/ppc/syslib/ppc_sys.c
@@ -14,6 +14,7 @@
  * option) any later version.
  */
 
+#include <linux/string.h>
 #include <asm/ppc_sys.h>
 
 int (*ppc_sys_device_fixup) (struct platform_device * pdev);
diff --git a/arch/ppc/syslib/prom.c b/arch/ppc/syslib/prom.c
index 278da6ee62ea..1b9aa0d6a924 100644
--- a/arch/ppc/syslib/prom.c
+++ b/arch/ppc/syslib/prom.c
@@ -1335,10 +1335,8 @@ release_OF_resource(struct device_node* node, int index)
 	if (!res)
 		return -ENODEV;
 
-	if (res->name) {
-		kfree(res->name);
-		res->name = NULL;
-	}
+	kfree(res->name);
+	res->name = NULL;
 	release_resource(res);
 	kfree(res);