powerpc/5200: Trim cruft from device trees

Trim out obsolete/extraneous properties and tighten up some usage
conventions.  Changes include:
- removal of device_type properties
- removal of cell-index properties
- Addition of gpio-controller and #gpio-cells properties to gpio
  nodes
- Move common interrupt-parent property out of device nodes and
  into top level parent node.

This patch also include what looks to be just trivial editorial
whitespace/format changes, but there is real method in this
madness.  Editorial changes were made to keep the all the
mpc5200 board device trees as similar as possible so that diffs
between them only show the real differences between the boards.
The pcm030 device tree was most affected by this because many
of the comments had been changed from // to /* */ style and
some cell values where changed from decimal to hex format when
it was cloned from one of the other 5200 device trees.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>

1 files changed, 9 insertions, 33 deletions

diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 52ba6f98b273..7be8ca038676 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -17,6 +17,7 @@
 	compatible = "promess,motionpro";
 	#address-cells = <1>;
 	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
 
 	cpus {
 		#address-cells = <1>;
@@ -66,7 +67,6 @@
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 			reg = <0x600 0x10>;
 			interrupts = <1 9 0>;
-			interrupt-parent = <&mpc5200_pic>;
 			fsl,has-wdt;
 		};
 
@@ -74,35 +74,30 @@
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 			reg = <0x610 0x10>;
 			interrupts = <1 10 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@620 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 			reg = <0x620 0x10>;
 			interrupts = <1 11 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@630 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 			reg = <0x630 0x10>;
 			interrupts = <1 12 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@640 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 			reg = <0x640 0x10>;
 			interrupts = <1 13 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		timer@650 {	// General Purpose Timer
 			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
 			reg = <0x650 0x10>;
 			interrupts = <1 14 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		motionpro-led@660 {	// Motion-PRO status LED
@@ -110,7 +105,6 @@
 			label = "motionpro-statusled";
 			reg = <0x660 0x10>;
 			interrupts = <1 15 0>;
-			interrupt-parent = <&mpc5200_pic>;
 			blink-delay = <100>; // 100 msec
 		};
 
@@ -119,49 +113,46 @@
 			label = "motionpro-readyled";
 			reg = <0x670 0x10>;
 			interrupts = <1 16 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		rtc@800 {	// Real time clock
 			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
 			reg = <0x800 0x100>;
 			interrupts = <1 5 0 1 6 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		can@980 {
 			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
 			interrupts = <2 18 0>;
-			interrupt-parent = <&mpc5200_pic>;
 			reg = <0x980 0x80>;
 		};
 
-		gpio@b00 {
+		gpio_simple: gpio@b00 {
 			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
 			interrupts = <1 7 0>;
-			interrupt-parent = <&mpc5200_pic>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
-		gpio@c00 {
+		gpio_wkup: gpio@c00 {
 			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
 			reg = <0xc00 0x40>;
 			interrupts = <1 8 0 0 3 0>;
-			interrupt-parent = <&mpc5200_pic>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		spi@f00 {
 			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
 			reg = <0xf00 0x20>;
 			interrupts = <2 13 0 2 14 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		usb@1000 {
 			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
 			reg = <0x1000 0xff>;
 			interrupts = <2 6 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		dma-controller@1200 {
@@ -171,7 +162,6 @@
 			              3 4 0  3 5 0  3 6 0  3 7 0
 			              3 8 0  3 9 0  3 10 0  3 11 0
 			              3 12 0  3 13 0  3 14 0  3 15 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		xlb@1f00 {
@@ -180,12 +170,9 @@
 		};
 
 		serial@2000 {		// PSC1
-			device_type = "serial";
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			port-number = <0>;  // Logical port assignment
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		// PSC2 in spi master mode 
@@ -194,26 +181,20 @@
 			cell-index = <1>;
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		// PSC5 in uart mode
 		serial@2800 {		// PSC5
-			device_type = "serial";
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			port-number = <4>;  // Logical port assignment
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		ethernet@3000 {
-			device_type = "network";
 			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
 			reg = <0x3000 0x400>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <2 5 0>;
-			interrupt-parent = <&mpc5200_pic>;
 			phy-handle = <&phy0>;
 		};
 
@@ -223,10 +204,8 @@
 			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
 			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-			interrupt-parent = <&mpc5200_pic>;
 
 			phy0: ethernet-phy@2 {
-				device_type = "ethernet-phy";
 				reg = <2>;
 			};
 		};
@@ -235,7 +214,6 @@
 			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
 			reg = <0x3a00 0x100>;
 			interrupts = <2 7 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		i2c@3d40 {
@@ -244,7 +222,6 @@
 			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
 			reg = <0x3d40 0x40>;
 			interrupts = <2 16 0>;
-			interrupt-parent = <&mpc5200_pic>;
 			fsl5200-clocking;
 
 			rtc@68 {
@@ -259,8 +236,8 @@
 		};
 	};
 
-	lpb {
-		compatible = "fsl,lpb";
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x01000000
@@ -273,7 +250,6 @@
 			compatible = "promess,motionpro-kollmorgen";
 			reg = <1 0 0x10000>;
 			interrupts = <1 1 0>;
-			interrupt-parent = <&mpc5200_pic>;
 		};
 
 		// 8-bit board CPLD on LocalPlus Bus CS2