mn10300: add the MN10300/AM33 architecture to the kernel

Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 191 insertions, 0 deletions

diff --git a/arch/mn10300/kernel/mn10300-serial-low.S b/arch/mn10300/kernel/mn10300-serial-low.S
new file mode 100644
index 000000000000..ef3f4c1df2a4
--- /dev/null
+++ b/arch/mn10300/kernel/mn10300-serial-low.S
@@ -0,0 +1,191 @@
+###############################################################################
+#
+# Virtual DMA driver for MN10300 serial ports
+#
+# Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+# Written by David Howells (dhowells@redhat.com)
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public Licence
+# as published by the Free Software Foundation; either version
+# 2 of the Licence, or (at your option) any later version.
+#
+###############################################################################
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/page.h>
+#include <asm/smp.h>
+#include <asm/cpu-regs.h>
+#include <asm/frame.inc>
+#include <asm/timer-regs.h>
+#include <asm/proc/cache.h>
+#include <asm/unit/timex.h>
+#include "mn10300-serial.h"
+
+#define	SCxCTR	0x00
+#define	SCxICR	0x04
+#define	SCxTXB	0x08
+#define	SCxRXB	0x09
+#define	SCxSTR	0x0c
+#define	SCxTIM	0x0d
+
+	.text
+
+###############################################################################
+#
+# serial port interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+#
+###############################################################################
+	.balign	L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_interrupt)
+	or	EPSW_IE,psw			# permit overriding by
+						# debugging interrupts
+	movm	[d2,d3,a2,a3,exreg0],(sp)
+
+	movhu	(IAGR),a2			# see if which interrupt is
+						# pending
+	and	IAGR_GN,a2
+	add	a2,a2
+	add	mn10300_serial_int_tbl,a2
+
+	mov	(a2+),a3
+	mov	(__iobase,a3),e2
+	mov	(a2),a2
+	jmp	(a2)
+
+###############################################################################
+#
+# serial port receive interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - stores data/status byte pairs in the ring buffer
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+# on entry:
+#	A3	struct mn10300_serial_port *
+#	E2	I/O port base
+#
+###############################################################################
+ENTRY(mn10300_serial_vdma_rx_handler)
+	mov	(__rx_icr,a3),e3
+	mov	GxICR_DETECT,d2
+	movbu	d2,(e3)				# ACK the interrupt
+	movhu	(e3),d2				# flush
+
+	mov	(__rx_inp,a3),d3
+	mov	d3,a2
+	add	2,d3
+	and	MNSC_BUFFER_SIZE-1,d3
+	mov	(__rx_outp,a3),d2
+	cmp	d3,d2
+	beq	mnsc_vdma_rx_overflow
+
+	mov	(__rx_buffer,a3),d2
+	add	d2,a2
+	movhu	(SCxSTR,e2),d2
+	movbu	d2,(1,a2)
+	movbu	(SCxRXB,e2),d2
+	movbu	d2,(a2)
+	mov	d3,(__rx_inp,a3)
+	bset	MNSCx_RX_AVAIL,(__intr_flags,a3)
+
+mnsc_vdma_rx_done:
+	mov	(__tm_icr,a3),a2
+	mov	GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+	movhu	d2,(a2)				# request a slow interrupt
+	movhu	(a2),d2				# flush
+
+	movm	(sp),[d2,d3,a2,a3,exreg0]
+	rti
+
+mnsc_vdma_rx_overflow:
+	bset	MNSCx_RX_OVERF,(__intr_flags,a3)
+	bra	mnsc_vdma_rx_done
+
+###############################################################################
+#
+# serial port transmit interrupt virtual DMA entry point
+# - intended to run at interrupt priority 1 (not affected by local_irq_disable)
+# - retrieves data bytes from the ring buffer and passes them to the serial port
+# - induces a scheduler tick timer interrupt when done, which we then subvert
+#	A3	struct mn10300_serial_port *
+#	E2	I/O port base
+#
+###############################################################################
+	.balign	L1_CACHE_BYTES
+ENTRY(mn10300_serial_vdma_tx_handler)
+	mov	(__tx_icr,a3),e3
+	mov	GxICR_DETECT,d2
+	movbu	d2,(e3)			# ACK the interrupt
+	movhu	(e3),d2			# flush
+
+	btst	0x01,(__tx_break,a3)	# handle transmit break request
+	bne	mnsc_vdma_tx_break
+
+	movbu	(SCxSTR,e2),d2		# don't try and transmit a char if the
+					# buffer is not empty
+	btst	SC01STR_TBF,d2		# (may have tried to jumpstart)
+	bne	mnsc_vdma_tx_noint
+
+	movbu	(__tx_xchar,a3),d2	# handle hi-pri XON/XOFF
+	or	d2,d2
+	bne	mnsc_vdma_tx_xchar
+
+	mov	(__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+	mov	(__xmit_tail,a2),d3
+	mov	(__xmit_head,a2),d2
+	cmp	d3,d2
+	beq	mnsc_vdma_tx_empty
+
+	mov	(__xmit_buffer,a2),d2	# get a char from the buffer and
+					# transmit it
+	movbu	(d3,d2),d2
+	movbu	d2,(SCxTXB,e2)		# Tx
+
+	inc	d3			# advance the buffer pointer
+	and	__UART_XMIT_SIZE-1,d3
+	mov	(__xmit_head,a2),d2
+	mov	d3,(__xmit_tail,a2)
+
+	sub	d3,d2			# see if we've written everything
+	beq	mnsc_vdma_tx_empty
+
+	and	__UART_XMIT_SIZE-1,d2	# see if we just made a hole
+	cmp	__UART_XMIT_SIZE-2,d2
+	beq	mnsc_vdma_tx_made_hole
+
+mnsc_vdma_tx_done:
+	mov	(__tm_icr,a3),a2
+	mov	GxICR_LEVEL_6|GxICR_ENABLE|GxICR_REQUEST|GxICR_DETECT,d2
+	movhu	d2,(a2)			# request a slow interrupt
+	movhu	(a2),d2			# flush
+
+mnsc_vdma_tx_noint:
+	movm	(sp),[d2,d3,a2,a3,exreg0]
+	rti
+
+mnsc_vdma_tx_empty:
+	mov	+(GxICR_LEVEL_1|GxICR_DETECT),d2
+	movhu	d2,(e3)			# disable the interrupt
+	movhu	(e3),d2			# flush
+
+	bset	MNSCx_TX_EMPTY,(__intr_flags,a3)
+	bra	mnsc_vdma_tx_done
+
+mnsc_vdma_tx_break:
+	movhu	(SCxCTR,e2),d2		# turn on break mode
+	or	SC01CTR_BKE,d2
+	movhu	d2,(SCxCTR,e2)
+	mov	+(GxICR_LEVEL_1|GxICR_DETECT),d2
+	movhu	d2,(e3)			# disable transmit interrupts on this
+					# channel
+	movhu	(e3),d2			# flush
+	bra	mnsc_vdma_tx_noint
+
+mnsc_vdma_tx_xchar:
+	bclr	0xff,(__tx_xchar,a3)
+	movbu	d2,(SCxTXB,e2)
+	bra	mnsc_vdma_tx_done
+
+mnsc_vdma_tx_made_hole:
+	bset	MNSCx_TX_SPACE,(__intr_flags,a3)
+	bra	mnsc_vdma_tx_done