diff options
| author | John Crispin <blogic@openwrt.org> | 2015-11-05 05:59:58 +0300 |
|---|---|---|
| committer | Ralf Baechle <ralf@linux-mips.org> | 2015-11-11 10:38:03 +0300 |
| commit | 73afa6c4208257ea1733a03918fea731a18131e7 (patch) | |
| tree | 6c04603025058017899ace02e0fb50a593e2978e /arch/mips | |
| parent | b361bd762e7724e660a44955ae4840aa984e3871 (diff) | |
| download | linux-73afa6c4208257ea1733a03918fea731a18131e7.tar.xz | |
MIPS: ralink: Add tty detection
MT7688 has several uarts that can be used for console. There are several
boards in the wild, that use ttyS1 or ttyS2. This patch applies a simply
autodetection routine to figure out which ttyS the bootloader used as
console. The uarts come up in 6 bit mode by default. The bootloader will
have set 8 bit mode on the console. Find that 8bit tty and use it.
Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11459/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
| -rw-r--r-- | arch/mips/ralink/early_printk.c | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c index 255d695ec8c6..3c59ffe5f5f5 100644 --- a/arch/mips/ralink/early_printk.c +++ b/arch/mips/ralink/early_printk.c @@ -25,11 +25,13 @@ #define MT7628_CHIP_NAME1 0x20203832 #define UART_REG_TX 0x04 +#define UART_REG_LCR 0x0c #define UART_REG_LSR 0x14 #define UART_REG_LSR_RT2880 0x1c static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE); static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE); +static int init_complete; static inline void uart_w32(u32 val, unsigned reg) { @@ -47,8 +49,32 @@ static inline int soc_is_mt7628(void) (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1); } +static void find_uart_base(void) +{ + int i; + + if (!soc_is_mt7628()) + return; + + for (i = 0; i < 3; i++) { + u32 reg = uart_r32(UART_REG_LCR + (0x100 * i)); + + if (!reg) + continue; + + uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + + (0x100 * i)); + break; + } +} + void prom_putchar(unsigned char ch) { + if (!init_complete) { + find_uart_base(); + init_complete = 1; + } + if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) { uart_w32(ch, UART_TX); while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) |