Merge branch 'linus' into x86/platform

Reason: Import mainline device tree changes on which further patches
        depend on or conflict.

Trivial conflict in: drivers/spi/pxa2xx_spi_pci.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

4 files changed, 23 insertions, 18 deletions

diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
index e01afa68273e..488c1ed24e38 100644
--- a/arch/microblaze/kernel/cpu/pvr.c
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -27,7 +27,7 @@
 	register unsigned tmp __asm__("r3");			\
 	tmp = 0x0;	/* Prevent warning about unused */	\
 	__asm__ __volatile__ (					\
-			"mfs	%0, rpvr" #pvrid ";"	\
+			"mfs	%0, rpvr" #pvrid ";"		\
 			: "=r" (tmp) : : "memory"); 		\
 	val = tmp;						\
 }
@@ -54,7 +54,7 @@ int cpu_has_pvr(void)
 	if (!(flags & PVR_MSR_BIT))
 		return 0;
 
-	get_single_pvr(0x00, pvr0);
+	get_single_pvr(0, pvr0);
 	pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
 
 	if (pvr0 & PVR0_PVR_FULL_MASK)
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 42434008209e..778a5ce2e4fc 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -62,23 +62,32 @@ real_start:
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 /*
- * Here is checking mechanism which check if Microblaze has msr instructions
- * We load msr and compare it with previous r1 value - if is the same,
- * msr instructions works if not - cpu don't have them.
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
  */
-	/* r8=0 - I have msr instr, 1 - I don't have them */
-	rsubi	r0, r0, 1	/* set the carry bit */
-	msrclr	r0, 0x4		/* try to clear it */
-	/* read the carry bit, r8 will be '0' if msrclr exists */
-	addik	r8, r0, 0
+	msrclr	r8, 0 /* clear nothing - just read msr for test */
+	cmpu	r8, r8, r1 /* r1 must contain msr reg content */
 
 /* r7 may point to an FDT, or there may be one linked in.
    if it's in r7, we've got to save it away ASAP.
    We ensure r7 points to a valid FDT, just in case the bootloader
    is broken or non-existent */
 	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
-	lw	r11, r0, r7			/* Does r7 point to a */
-	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+/* Does r7 point to a valid FDT? Load HEADER magic number */
+	/* Run time Big/Little endian platform */
+	/* Save 1 as word and load byte - 0 - BIG, 1 - LITTLE */
+	addik	r11, r0, 0x1 /* BIG/LITTLE checking value */
+	/* __bss_start will be zeroed later - it is just temp location */
+	swi	r11, r0, TOPHYS(__bss_start)
+	lbui	r11, r0, TOPHYS(__bss_start)
+	beqid	r11, big_endian /* DO NOT break delay stop dependency */
+	lw	r11, r0, r7 /* Big endian load in delay slot */
+	lwr	r11, r0, r7 /* Little endian load */
+big_endian:
+	rsubi	r11, r11, OF_DT_HEADER	/* Check FDT header */
 	beqi	r11, _prepare_copy_fdt
 	or	r7, r0, r0		/* clear R7 when not valid DTB */
 	bnei	r11, no_fdt_arg			/* No - get out of here */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 25f6e07d8de8..782680de3121 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -147,10 +147,6 @@
 	#if CONFIG_XILINX_MICROBLAZE0_USE_BARREL > 0
 	#define BSRLI(rD, rA, imm)	\
 		bsrli rD, rA, imm
-	#elif CONFIG_XILINX_MICROBLAZE0_USE_DIV > 0
-	#define BSRLI(rD, rA, imm)	\
-		ori rD, r0, (1 << imm);	\
-		idivu rD, rD, rA
 	#else
 	#define BSRLI(rD, rA, imm) BSRLI ## imm (rD, rA)
 	/* Only the used shift constants defined here - add more if needed */
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index bb1558e4b283..9312fbb37efd 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 #if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
 	if (msr)
 		eprintk("!!!Your kernel has setup MSR instruction but "
-				"CPU don't have it %d\n", msr);
+				"CPU don't have it %x\n", msr);
 #else
 	if (!msr)
 		eprintk("!!!Your kernel not setup MSR instruction but "
-				"CPU have it %d\n", msr);
+				"CPU have it %x\n", msr);
 #endif
 
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)