arch: remove blackfin port

The Analog Devices Blackfin port was added in 2007 and was rather
active for a while, but all work on it has come to a standstill
over time, as Analog have changed their product line-up.

Aaron Wu confirmed that the architecture port is no longer relevant,
and multiple people suggested removing blackfin independently because
of some of its oddities like a non-working SMP port, and the amount of
duplication between the chip variants, which cause extra work when
doing cross-architecture changes.

Link: https://docs.blackfin.uclinux.org/
Acked-by: Aaron Wu <Aaron.Wu@analog.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 919 deletions

diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
deleted file mode 100644
index 27cbf2fa2c62..000000000000
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ /dev/null
@@ -1,919 +0,0 @@
-/*
- * Copyright 2004-2009 Analog Devices Inc.
- *                2005 National ICT Australia (NICTA)
- *                      Aidan Williams <aidan@nicta.com.au>
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#if IS_ENABLED(CONFIG_USB_ISP1362_HCD)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/i2c.h>
-#include <linux/gpio/machine.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <asm/dpmc.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "ADI BF533-STAMP";
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if IS_ENABLED(CONFIG_SMC91X)
-#include <linux/smc91x.h>
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
-	.leda = RPC_LED_100_10,
-	.ledb = RPC_LED_TX_RX,
-};
-
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 1,
-		.flags = IORESOURCE_BUS,
-	}, {
-		.start = IRQ_PF10,
-		.end = IRQ_PF10,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
-static struct mtd_partition stamp_partitions[] = {
-	{
-		.name   = "bootloader(nor)",
-		.size   = 0x40000,
-		.offset = 0,
-	}, {
-		.name   = "linux kernel(nor)",
-		.size   = 0x180000,
-		.offset = MTDPART_OFS_APPEND,
-	}, {
-		.name   = "file system(nor)",
-		.size   = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct physmap_flash_data stamp_flash_data = {
-	.width    = 2,
-	.parts    = stamp_partitions,
-	.nr_parts = ARRAY_SIZE(stamp_partitions),
-};
-
-static struct resource stamp_flash_resource[] = {
-	{
-		.name  = "cfi_probe",
-		.start = 0x20000000,
-		.end   = 0x203fffff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x7BB07BB0,	/* AMBCTL0 setting when accessing flash */
-		.end   = 0x7BB07BB0,	/* AMBCTL1 setting when accessing flash */
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = GPIO_PF0,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device stamp_flash_device = {
-	.name          = "bfin-async-flash",
-	.id            = 0,
-	.dev = {
-		.platform_data = &stamp_flash_data,
-	},
-	.num_resources = ARRAY_SIZE(stamp_flash_resource),
-	.resource      = stamp_flash_resource,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00040000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0x180000,
-		.offset = MTDPART_OFS_APPEND,
-	}, {
-		.name = "file system(spi)",
-		.size = MTDPART_SIZ_FULL,
-		.offset = MTDPART_OFS_APPEND,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-};
-#endif
-
-#if IS_ENABLED(CONFIG_MMC_SPI)
-#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
-static int bfin_mmc_spi_init(struct device *dev,
-	irqreturn_t (*detect_int)(int, void *), void *data)
-{
-	return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
-		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-		"mmc-spi-detect", data);
-}
-
-static void bfin_mmc_spi_exit(struct device *dev, void *data)
-{
-	free_irq(MMC_SPI_CARD_DETECT_INT, data);
-}
-
-static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
-	.init = bfin_mmc_spi_init,
-	.exit = bfin_mmc_spi_exit,
-	.detect_delay = 100, /* msecs */
-};
-
-static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
-	.enable_dma = 0,
-	.pio_interrupt = 0,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if IS_ENABLED(CONFIG_MTD_M25P80)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL2*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-	{
-		.modalias = "ad1836",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 4,
-		.platform_data = "ad1836", /* only includes chip name for the moment */
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_SPIDEV)
-	{
-		.modalias = "spidev",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-	},
-#endif
-#if IS_ENABLED(CONFIG_MMC_SPI)
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 4,
-		.platform_data = &bfin_mmc_spi_pdata,
-		.controller_data = &mmc_spi_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-};
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_DMA,
-	},
-	[2] = {
-		.start = IRQ_SPI,
-		.end   = IRQ_SPI,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-static struct resource bfin_uart0_resources[] = {
-	{
-		.start = BFIN_UART_THR,
-		.end = BFIN_UART_GCTL+2,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_TX,
-		.end = IRQ_UART0_TX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_UART0_ERROR,
-		.end = IRQ_UART0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_TX,
-		.end = CH_UART0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static unsigned short bfin_uart0_peripherals[] = {
-	P_UART0_TX, P_UART0_RX, 0
-};
-
-static struct platform_device bfin_uart0_device = {
-	.name = "bfin-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_uart0_resources),
-	.resource = bfin_uart0_resources,
-	.dev = {
-		.platform_data = &bfin_uart0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-static struct resource bfin_sport0_uart_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport0_peripherals[] = {
-	P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
-	P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
-};
-
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
-	.resource = bfin_sport0_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-static struct resource bfin_sport1_uart_resources[] = {
-	{
-		.start = SPORT1_TCR1,
-		.end = SPORT1_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT1_RX,
-		.end = IRQ_SPORT1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT1_ERROR,
-		.end = IRQ_SPORT1_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static unsigned short bfin_sport1_peripherals[] = {
-	P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
-	P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
-	.resource = bfin_sport1_uart_resources,
-	.dev = {
-		.platform_data = &bfin_sport1_peripherals, /* Passed to driver */
-	},
-};
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SPORT)
-static struct resource bfin_sport0_resources[] = {
-	{
-		.start = SPORT0_TCR1,
-		.end = SPORT0_MRCS3+4,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_SPORT0_TX,
-		.end = IRQ_SPORT0_TX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_RX,
-		.end = IRQ_SPORT0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = IRQ_SPORT0_ERROR,
-		.end = IRQ_SPORT0_ERROR,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_SPORT0_TX,
-		.end = CH_SPORT0_TX,
-		.flags = IORESOURCE_DMA,
-	},
-	{
-		.start = CH_SPORT0_RX,
-		.end = CH_SPORT0_RX,
-		.flags = IORESOURCE_DMA,
-	},
-};
-static struct platform_device bfin_sport0_device = {
-	.name = "bfin_sport_raw",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sport0_resources),
-	.resource = bfin_sport0_resources,
-	.dev = {
-		.platform_data = &bfin_sport0_peripherals,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button bfin_gpio_keys_table[] = {
-	{BTN_0, GPIO_PF5, 0, "gpio-keys: BTN0"},
-	{BTN_1, GPIO_PF6, 0, "gpio-keys: BTN1"},
-	{BTN_2, GPIO_PF8, 0, "gpio-keys: BTN2"},
-};
-
-static struct gpio_keys_platform_data bfin_gpio_keys_data = {
-	.buttons        = bfin_gpio_keys_table,
-	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
-};
-
-static struct platform_device bfin_device_gpiokeys = {
-	.name      = "gpio-keys",
-	.dev = {
-		.platform_data = &bfin_gpio_keys_data,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_GPIO)
-#include <linux/i2c-gpio.h>
-
-static struct gpiod_lookup_table bfin_i2c_gpiod_table = {
-	.dev_id = "i2c-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF2, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-		GPIO_LOOKUP_IDX("BFIN-GPIO", GPIO_PF3, NULL, 1,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct i2c_gpio_platform_data i2c_gpio_data = {
-	.udelay			= 10,
-};
-
-static struct platform_device i2c_gpio_device = {
-	.name		= "i2c-gpio",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &i2c_gpio_data,
-	},
-};
-#endif
-
-static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if IS_ENABLED(CONFIG_JOYSTICK_AD7142)
-	{
-		I2C_BOARD_INFO("ad7142_joystick", 0x2C),
-		.irq = 39,
-	},
-#endif
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
-	},
-#endif
-#if IS_ENABLED(CONFIG_INPUT_PCF8574)
-	{
-		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
-		.irq = 39,
-	},
-#endif
-#if IS_ENABLED(CONFIG_FB_BFIN_7393)
-	{
-		I2C_BOARD_INFO("bfin-adv7393", 0x2B),
-	},
-#endif
-#if IS_ENABLED(CONFIG_BFIN_TWI_LCD)
-	{
-		I2C_BOARD_INFO("ad5252", 0x2f),
-	},
-#endif
-};
-
-static const unsigned int cclk_vlev_datasheet[] =
-{
-	VRPAIR(VLEV_085, 250000000),
-	VRPAIR(VLEV_090, 376000000),
-	VRPAIR(VLEV_095, 426000000),
-	VRPAIR(VLEV_100, 426000000),
-	VRPAIR(VLEV_105, 476000000),
-	VRPAIR(VLEV_110, 476000000),
-	VRPAIR(VLEV_115, 476000000),
-	VRPAIR(VLEV_120, 600000000),
-	VRPAIR(VLEV_125, 600000000),
-	VRPAIR(VLEV_130, 600000000),
-};
-
-static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
-	.tuple_tab = cclk_vlev_datasheet,
-	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
-	.vr_settling_time = 25 /* us */,
-};
-
-static struct platform_device bfin_dpmc = {
-	.name = "bfin dpmc",
-	.dev = {
-		.platform_data = &bfin_dmpc_vreg_data,
-	},
-};
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S) || \
-	IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-
-#include <asm/bfin_sport.h>
-
-#define SPORT_REQ(x) \
-	[x] = {P_SPORT##x##_TFS, P_SPORT##x##_DTPRI, P_SPORT##x##_TSCLK, \
-		P_SPORT##x##_RFS, P_SPORT##x##_DRPRI, P_SPORT##x##_RSCLK, 0}
-
-static const u16 bfin_snd_pin[][7] = {
-	SPORT_REQ(0),
-	SPORT_REQ(1),
-};
-
-static struct bfin_snd_platform_data bfin_snd_data[] = {
-	{
-		.pin_req = &bfin_snd_pin[0][0],
-	},
-	{
-		.pin_req = &bfin_snd_pin[1][0],
-	},
-};
-
-#define BFIN_SND_RES(x) \
-	[x] = { \
-		{ \
-			.start = SPORT##x##_TCR1, \
-			.end = SPORT##x##_TCR1, \
-			.flags = IORESOURCE_MEM \
-		}, \
-		{ \
-			.start = CH_SPORT##x##_RX, \
-			.end = CH_SPORT##x##_RX, \
-			.flags = IORESOURCE_DMA, \
-		}, \
-		{ \
-			.start = CH_SPORT##x##_TX, \
-			.end = CH_SPORT##x##_TX, \
-			.flags = IORESOURCE_DMA, \
-		}, \
-		{ \
-			.start = IRQ_SPORT##x##_ERROR, \
-			.end = IRQ_SPORT##x##_ERROR, \
-			.flags = IORESOURCE_IRQ, \
-		} \
-	}
-
-static struct resource bfin_snd_resources[][4] = {
-	BFIN_SND_RES(0),
-	BFIN_SND_RES(1),
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-static struct platform_device bfin_i2s_pcm = {
-	.name = "bfin-i2s-pcm-audio",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-static struct platform_device bfin_ac97_pcm = {
-	.name = "bfin-ac97-pcm-audio",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-static const char * const ad1836_link[] = {
-	"bfin-i2s.0",
-	"spi0.4",
-};
-static struct platform_device bfin_ad1836_machine = {
-	.name = "bfin-snd-ad1836",
-	.id = -1,
-	.dev = {
-		.platform_data = (void *)ad1836_link,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
-static const unsigned ad73311_gpio[] = {
-	GPIO_PF4,
-};
-
-static struct platform_device bfin_ad73311_machine = {
-	.name = "bfin-snd-ad73311",
-	.id = 1,
-	.dev = {
-		.platform_data = (void *)ad73311_gpio,
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
-static struct platform_device bfin_ad73311_codec_device = {
-	.name = "ad73311",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
-static struct platform_device bfin_ad74111_codec_device = {
-	.name = "ad74111",
-	.id = -1,
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
-static struct platform_device bfin_i2s = {
-	.name = "bfin-i2s",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	.num_resources =
-		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
-	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
-	.dev = {
-		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
-	},
-};
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
-static struct platform_device bfin_ac97 = {
-	.name = "bfin-ac97",
-	.id = CONFIG_SND_BF5XX_SPORT_NUM,
-	.num_resources =
-		ARRAY_SIZE(bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM]),
-	.resource = bfin_snd_resources[CONFIG_SND_BF5XX_SPORT_NUM],
-	.dev = {
-		.platform_data = &bfin_snd_data[CONFIG_SND_BF5XX_SPORT_NUM],
-	},
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-
-	&bfin_dpmc,
-
-#if IS_ENABLED(CONFIG_RTC_DRV_BFIN)
-	&rtc_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	&smc91x_device,
-#endif
-
-#if IS_ENABLED(CONFIG_USB_NET2272)
-	&net2272_bfin_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SPI_BFIN5XX)
-	&bfin_spi0_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_BFIN_SIR)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_SERIAL_BFIN_SPORT)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-
-#if IS_ENABLED(CONFIG_KEYBOARD_GPIO)
-	&bfin_device_gpiokeys,
-#endif
-
-#if IS_ENABLED(CONFIG_I2C_GPIO)
-	&i2c_gpio_device,
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_BFIN_ASYNC)
-	&stamp_flash_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_I2S)
-	&bfin_i2s_pcm,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_AC97)
-	&bfin_ac97_pcm,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD1836)
-	&bfin_ad1836_machine,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AD73311)
-	&bfin_ad73311_machine,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_SOC_AD73311)
-	&bfin_ad73311_codec_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_SOC_AD74111)
-	&bfin_ad74111_codec_device,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_I2S)
-	&bfin_i2s,
-#endif
-
-#if IS_ENABLED(CONFIG_SND_BF5XX_SOC_AC97)
-	&bfin_ac97,
-#endif
-};
-
-static int __init net2272_init(void)
-{
-#if IS_ENABLED(CONFIG_USB_NET2272)
-	int ret;
-
-	/* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */
-	ret = gpio_request(GPIO_PF0, "net2272");
-	if (ret)
-		return ret;
-
-	ret = gpio_request(GPIO_PF1, "net2272");
-	if (ret) {
-		gpio_free(GPIO_PF0);
-		return ret;
-	}
-
-	ret = gpio_request(GPIO_PF11, "net2272");
-	if (ret) {
-		gpio_free(GPIO_PF0);
-		gpio_free(GPIO_PF1);
-		return ret;
-	}
-
-	gpio_direction_output(GPIO_PF0, 0);
-	gpio_direction_output(GPIO_PF1, 1);
-
-	/* Reset the USB chip */
-	gpio_direction_output(GPIO_PF11, 0);
-	mdelay(2);
-	gpio_set_value(GPIO_PF11, 1);
-#endif
-
-	return 0;
-}
-
-static int __init stamp_init(void)
-{
-	int ret;
-
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-
-#if IS_ENABLED(CONFIG_I2C_GPIO)
-	gpiod_add_lookup_table(&bfin_i2c_gpiod_table);
-#endif
-	i2c_register_board_info(0, bfin_i2c_board_info,
-				ARRAY_SIZE(bfin_i2c_board_info));
-
-	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-	if (ret < 0)
-		return ret;
-
-#if IS_ENABLED(CONFIG_SMC91X)
-	/*
-	 * setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC.
-	 * the bfin-async-map driver takes care of flipping between
-	 * flash and ethernet when necessary.
-	 */
-	ret = gpio_request(GPIO_PF0, "enet_cpld");
-	if (!ret) {
-		gpio_direction_output(GPIO_PF0, 1);
-		gpio_free(GPIO_PF0);
-	}
-#endif
-
-	if (net2272_init())
-		pr_warning("unable to configure net2272; it probably won't work\n");
-
-	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-	return 0;
-}
-
-arch_initcall(stamp_init);
-
-static struct platform_device *stamp_early_devices[] __initdata = {
-#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
-#ifdef CONFIG_SERIAL_BFIN_UART0
-	&bfin_uart0_device,
-#endif
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
-#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
-	&bfin_sport0_uart_device,
-#endif
-#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
-	&bfin_sport1_uart_device,
-#endif
-#endif
-};
-
-void __init native_machine_early_platform_add_devices(void)
-{
-	printk(KERN_INFO "register early platform devices\n");
-	early_platform_add_devices(stamp_early_devices,
-		ARRAY_SIZE(stamp_early_devices));
-}
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround pull up on cpld / flash pin not being strong enough */
-	gpio_request(GPIO_PF0, "flash_cpld");
-	gpio_direction_output(GPIO_PF0, 0);
-}