ARM: ux500: move SPI pin config to device tree

This moves the SPI pin control table out of the board file
and into the device tree. Move the specific setting for
SSP0 on the HREFprev60 into the prev60-specific DTS file.
The SPI2 configuration is not really connected to any device,
as it will conflict with GPIO218 which is used on all HREFs.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

4 files changed, 114 insertions, 19 deletions

diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index 6868fec95d64..ec990d8e1029 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -215,6 +215,67 @@
 				};
 			};
 
+			/* Settings for all SPI default and sleep states */
+			spi2 {
+				spi2_default_mode: spi_default {
+					default_mux {
+						ste,function = "spi2";
+						ste,pins = "spi2_oc1_2";
+					};
+					default_cfg1 {
+						ste,pins = "GPIO216_AG12"; /* FRM */
+						ste,config = <&gpio_out_hi>;
+					};
+					default_cfg2 {
+						ste,pins = "GPIO218_AH11"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+					default_cfg3 {
+						ste,pins =
+						"GPIO215_AH13", /* TXD */
+						"GPIO217_AH12"; /* CLK */
+						ste,config = <&out_lo>;
+					};
+				};
+
+				spi2_idle_mode: spi_idle {
+					/*
+					 * The idle mode is basically sleep mode sans wakeups. Also
+					 * note that we have muxes the pins off the function here
+					 * as we do not state any muxing.
+					 */
+					idle_cfg1 {
+						ste,pins = "GPIO218_AH11"; /* RXD */
+						ste,config = <&slpm_in_pdis>;
+					};
+					idle_cfg2 {
+						ste,pins = "GPIO215_AH13"; /* TXD */
+						ste,config = <&slpm_out_lo_pdis>;
+					};
+					idle_cfg3 {
+						ste,pins = "GPIO217_AH12"; /* CLK */
+						ste,config = <&slpm_pdis>;
+					};
+				};
+
+				spi2_sleep_mode: spi_sleep {
+					sleep_cfg1 {
+						ste,pins =
+						"GPIO216_AG12", /* FRM */
+						"GPIO218_AH11"; /* RXD */
+						ste,config = <&slpm_in_wkup_pdis>;
+					};
+					sleep_cfg2 {
+						ste,pins = "GPIO215_AH13"; /* TXD */
+						ste,config = <&slpm_out_lo_wkup_pdis>;
+					};
+					sleep_cfg3 {
+						ste,pins = "GPIO217_AH12"; /* CLK */
+						ste,config = <&slpm_wkup_pdis>;
+					};
+				};
+			};
+
 			/* Settings for all MMC/SD/SDIO default and sleep states */
 			sdi0 {
 				/* This is the external SD card slot, 4 bits wide */
diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi
index 6fc94ea65ab9..32295e396ff8 100644
--- a/arch/arm/boot/dts/ste-hrefprev60.dtsi
+++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi
@@ -51,6 +51,15 @@
 			};
 		};
 
+		ssp@80002000 {
+			/*
+			 * On the first generation boards, this SSP/SPI port was connected
+			 * to the AB8500.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&ssp0_hrefprev60_mode>;
+		};
+
 		vmmci: regulator-gpio {
 			gpios = <&tc3589x_gpio 18 0x4>;
 			enable-gpio = <&tc3589x_gpio 17 0x4>;
@@ -59,6 +68,19 @@
 		};
 
 		pinctrl {
+			ssp0 {
+				ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
+					hrefprev60_mux {
+						ste,function = "ssp0";
+						ste,pins = "ssp0_a_1";
+					};
+					hrefprev60_cfg1 {
+						ste,pins = "GPIO145_C13"; /* RXD */
+						ste,config = <&in_pd>;
+					};
+
+				};
+			};
 			sdi0 {
 				/* This additional pin needed on early MOP500 and HREFs previous to v60 */
 				sdi0_default_mode: sdi0_default {
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
index 9f3e87573f86..456a25fbfaee 100644
--- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -41,6 +41,23 @@
 		ste,output = <OUTPUT_LOW>;
 	};
 
+	gpio_out_hi: gpio_output_high {
+		ste,gpio = <GPIOMODE_ENABLED>;
+		ste,output = <OUTPUT_HIGH>;
+	};
+
+	slpm_pdis: slpm_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
+	slpm_wkup_pdis: slpm_wkup_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_wkup_pdis_en: slpm_wkup_pdis_en {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
@@ -53,6 +70,13 @@
 		ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
 	};
 
+	slpm_in_pdis: slpm_in_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-input = <SLPM_DIR_INPUT>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_in_wkup_pdis: slpm_in_wkup_pdis {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-input = <SLPM_DIR_INPUT>;
@@ -86,6 +110,13 @@
 		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
 	};
 
+	slpm_out_lo_pdis: slpm_out_lo_pdis {
+		ste,sleep = <SLPM_ENABLED>;
+		ste,sleep-output = <SLPM_OUTPUT_LOW>;
+		ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>;
+		ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+	};
+
 	slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis {
 		ste,sleep = <SLPM_ENABLED>;
 		ste,sleep-output = <SLPM_OUTPUT_LOW>;
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index a6d431bd0659..8fba58c98da2 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -342,22 +342,6 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	/* LCD VSI1 sleep state */
 	DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
 
-	/* Mux in SPI2 pins on the "other C1" altfunction */
-	DB8500_MUX("spi2_oc1_2", "spi2", "spi2"),
-	DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */
-	DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */
-	DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */
-	DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */
-	/* SPI2 idle state */
-	DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
-	DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
-	DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-	/* SPI2 sleep state */
-	DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */
-	DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */
-	DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */
-	DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */
-
 	/* ske default state */
 	DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
 	DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */
@@ -582,9 +566,6 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
  * on-chip pins as the HREFv60 and later does.
  */
 static struct pinctrl_map __initdata mop500_pinmap[] = {
-	/* Mux in SSP0, pull down RXD pin */
-	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
-	DB8500_PIN_HOG("GPIO145_C13", pd),
 	/*
 	 * XENON Flashgun on image processor GPIO (controlled from image
 	 * processor firmware), mux in these image processor GPIO lines 0