Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Olof Johansson:
 "I didn't get a batch in this weekend, so here's what we queued up last
  week and today.

   - A couple of defconfigs add back debugfs -- it used to be implicitly
     enabled through CONFIG_TRACING, but 0e4a459f56c32d3e ("tracing:
     Remove unnecessary DEBUG_FS dependency") removed that.

   - The rest are mostly minor fixlets of the usual kind; some DT
     tweaks, a headerfile refactor that needs a build fix now, etc"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: bcm: Add missing sentinel to bcm2711_compat[]
  ARM: shmobile: defconfig: Restore debugfs support
  bus: ti-sysc: Fix missing reset delay handling
  ARM: imx: Fix boot crash if ocotp is not found
  ARM: imx_v6_v7_defconfig: Explicitly restore CONFIG_DEBUG_FS
  ARM: dts: imx6ul-evk: Fix peripheral regulator
  arm64: dts: ls1028a: fix reboot node
  ARM: mmp: include the correct cputype.h
  ARM: dts: am437x-gp/epos-evm: fix panel compatible
  arm64: dts: ls1028a: fix typo in TMU calibration data
  ARM: imx: Correct ocotp id for serial number support of i.MX6ULL/ULZ SoCs
  ARM: dts: bcm283x: Fix critical trip point
  ARM: omap2plus_defconfig: Add back DEBUG_FS
  ARM: omap2plus_defconfig: enable NET_SWITCHDEV
  ARM: dts: am335x-sancloud-bbe: fix phy mode
  bus: ti-sysc: Fix missing force mstandby quirk handling
  reset: Do not register resource data for missing resets
  reset: Fix {of,devm}_reset_control_array_get kerneldoc return types
  reset: brcmstb: Remove resource checks
  dt-bindings: reset: Fix brcmstb-reset example
  ...

17 files changed, 54 insertions, 27 deletions

diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
index 8678e6e35493..e5fdb7abb0d5 100644
--- a/arch/arm/boot/dts/am335x-sancloud-bbe.dts
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -108,7 +108,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index cae4500194fe..811c8cae315b 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -86,7 +86,7 @@
 		};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 95314121d111..078cb473fa7d 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -42,7 +42,7 @@
 	};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
 		backlight = <&lcd_bl>;
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 2dac3efc7640..1bc45cfd5453 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -174,8 +174,8 @@
 		mdio: mdio@18002000 {
 			compatible = "brcm,iproc-mdio";
 			reg = <0x18002000 0x8>;
-			#size-cells = <1>;
-			#address-cells = <0>;
+			#size-cells = <0>;
+			#address-cells = <1>;
 			status = "disabled";
 
 			gphy0: ethernet-phy@0 {
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 961bed832755..e2f6ffb00aa9 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -43,7 +43,7 @@
 			 <0x7c000000  0x0 0xfc000000  0x02000000>,
 			 <0x40000000  0x0 0xff800000  0x00800000>;
 		/* Emulate a contiguous 30-bit address range for DMA */
-		dma-ranges = <0xc0000000  0x0 0x00000000  0x3c000000>;
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
 
 		/*
 		 * This node is the provider for the enable-method for
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 3caaa57eb6c8..839491628e87 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -37,7 +37,7 @@
 
 			trips {
 				cpu-crit {
-					temperature	= <80000>;
+					temperature	= <90000>;
 					hysteresis	= <0>;
 					type		= "critical";
 				};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 372dc1eb88a0..2d9b4dd05830 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -353,8 +353,8 @@
 	mdio: mdio@18003000 {
 		compatible = "brcm,iproc-mdio";
 		reg = <0x18003000 0x8>;
-		#size-cells = <1>;
-		#address-cells = <0>;
+		#size-cells = <0>;
+		#address-cells = <1>;
 	};
 
 	mdio-bus-mux@18003000 {
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index 6472b056a001..5a2c5320437d 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -265,11 +265,6 @@
 				regulator-name = "LDORTC1";
 				regulator-boot-on;
 			};
-
-			ldortc2_reg: LDORTC2 {
-				regulator-name = "LDORTC2";
-				regulator-boot-on;
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 1506eb12b21e..212144511b66 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -30,14 +30,26 @@
 		enable-active-high;
 	};
 
-	reg_sensors: regulator-sensors {
+	reg_peri_3v3: regulator-peri-3v3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sensors_reg>;
-		regulator-name = "sensors-supply";
+		pinctrl-0 = <&pinctrl_peri_3v3>;
+		regulator-name = "VPERI_3V3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
+		/*
+		 * If you want to want to make this dynamic please
+		 * check schematics and test all affected peripherals:
+		 *
+		 * - sensors
+		 * - ethernet phy
+		 * - can
+		 * - bluetooth
+		 * - wm8960 audio codec
+		 * - ov5640 camera
+		 */
+		regulator-always-on;
 	};
 
 	reg_can_3v3: regulator-can-3v3 {
@@ -140,6 +152,7 @@
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy0>;
+	phy-supply = <&reg_peri_3v3>;
 	status = "okay";
 };
 
@@ -148,6 +161,7 @@
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
+	phy-supply = <&reg_peri_3v3>;
 	status = "okay";
 
 	mdio {
@@ -193,8 +207,8 @@
 	magnetometer@e {
 		compatible = "fsl,mag3110";
 		reg = <0x0e>;
-		vdd-supply = <&reg_sensors>;
-		vddio-supply = <&reg_sensors>;
+		vdd-supply = <&reg_peri_3v3>;
+		vddio-supply = <&reg_peri_3v3>;
 	};
 };
 
@@ -227,7 +241,7 @@
 	flash0: n25q256a@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q256a";
+		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
@@ -462,7 +476,7 @@
 		>;
 	};
 
-	pinctrl_sensors_reg: sensorsreggrp {
+	pinctrl_peri_3v3: peri3v3grp {
 		fsl,pins = <
 			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
 		>;
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index e7e4bb5ad8d5..fde84f123fbb 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -350,6 +350,7 @@ CONFIG_PRINTK_TIME=y
 CONFIG_DYNAMIC_DEBUG=y
 CONFIG_DEBUG_INFO=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 # CONFIG_DETECT_HUNG_TASK is not set
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 26d6dee67aa6..3608e55eaecd 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -462,6 +462,7 @@ CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
 CONFIG_PRINTK_TIME=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_PROVE_LOCKING=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 8c37cc8ab6f2..c32c338f7704 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -92,6 +92,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
 CONFIG_NETFILTER=y
 CONFIG_PHONET=m
+CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
@@ -181,6 +182,7 @@ CONFIG_SMSC911X=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 CONFIG_TI_DAVINCI_EMAC=y
 CONFIG_TI_CPSW=y
+CONFIG_TI_CPSW_SWITCHDEV=y
 CONFIG_TI_CPTS=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
@@ -554,6 +556,6 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_INFO_SPLIT=y
 CONFIG_DEBUG_INFO_DWARF4=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_TI_CPSW_SWITCHDEV=y
diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig
index bda57cafa2bc..de3830443613 100644
--- a/arch/arm/configs/shmobile_defconfig
+++ b/arch/arm/configs/shmobile_defconfig
@@ -212,4 +212,5 @@ CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
 CONFIG_PRINTK_TIME=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
diff --git a/arch/arm/mach-bcm/bcm2711.c b/arch/arm/mach-bcm/bcm2711.c
index dbe296798647..fa0300d8c79d 100644
--- a/arch/arm/mach-bcm/bcm2711.c
+++ b/arch/arm/mach-bcm/bcm2711.c
@@ -13,6 +13,7 @@ static const char * const bcm2711_compat[] = {
 #ifdef CONFIG_ARCH_MULTI_V7
 	"brcm,bcm2711",
 #endif
+	NULL
 };
 
 DT_MACHINE_START(BCM2711, "BCM2711")
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index d8118031c51f..871f98342d50 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -84,7 +84,7 @@ struct device * __init imx_soc_device_init(void)
 	const char *ocotp_compat = NULL;
 	struct soc_device *soc_dev;
 	struct device_node *root;
-	struct regmap *ocotp;
+	struct regmap *ocotp = NULL;
 	const char *soc_id;
 	u64 soc_uid = 0;
 	u32 val;
@@ -148,11 +148,11 @@ struct device * __init imx_soc_device_init(void)
 		soc_id = "i.MX6UL";
 		break;
 	case MXC_CPU_IMX6ULL:
-		ocotp_compat = "fsl,imx6ul-ocotp";
+		ocotp_compat = "fsl,imx6ull-ocotp";
 		soc_id = "i.MX6ULL";
 		break;
 	case MXC_CPU_IMX6ULZ:
-		ocotp_compat = "fsl,imx6ul-ocotp";
+		ocotp_compat = "fsl,imx6ull-ocotp";
 		soc_id = "i.MX6ULZ";
 		break;
 	case MXC_CPU_IMX6SLL:
@@ -175,7 +175,9 @@ struct device * __init imx_soc_device_init(void)
 		ocotp = syscon_regmap_lookup_by_compatible(ocotp_compat);
 		if (IS_ERR(ocotp))
 			pr_err("%s: failed to find %s regmap!\n", __func__, ocotp_compat);
+	}
 
+	if (!IS_ERR_OR_NULL(ocotp)) {
 		regmap_read(ocotp, OCOTP_UID_H, &val);
 		soc_uid = val;
 		regmap_read(ocotp, OCOTP_UID_L, &val);
diff --git a/arch/arm/mach-mmp/pxa168.h b/arch/arm/mach-mmp/pxa168.h
index 0331c58b07a2..dff651b9f252 100644
--- a/arch/arm/mach-mmp/pxa168.h
+++ b/arch/arm/mach-mmp/pxa168.h
@@ -17,9 +17,9 @@ extern void pxa168_clear_keypad_wakeup(void);
 #include <linux/platform_data/keypad-pxa27x.h>
 #include <linux/pxa168_eth.h>
 #include <linux/platform_data/mv_usb.h>
+#include <linux/soc/mmp/cputype.h>
 
 #include "devices.h"
-#include "cputype.h"
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
diff --git a/arch/arm/mach-vexpress/spc.c b/arch/arm/mach-vexpress/spc.c
index 354e0e7025ae..1da11bdb1dfb 100644
--- a/arch/arm/mach-vexpress/spc.c
+++ b/arch/arm/mach-vexpress/spc.c
@@ -551,8 +551,9 @@ static struct clk *ve_spc_clk_register(struct device *cpu_dev)
 
 static int __init ve_spc_clk_init(void)
 {
-	int cpu;
+	int cpu, cluster;
 	struct clk *clk;
+	bool init_opp_table[MAX_CLUSTERS] = { false };
 
 	if (!info)
 		return 0; /* Continue only if SPC is initialised */
@@ -578,8 +579,17 @@ static int __init ve_spc_clk_init(void)
 			continue;
 		}
 
+		cluster = topology_physical_package_id(cpu_dev->id);
+		if (init_opp_table[cluster])
+			continue;
+
 		if (ve_init_opp_table(cpu_dev))
 			pr_warn("failed to initialise cpu%d opp table\n", cpu);
+		else if (dev_pm_opp_set_sharing_cpus(cpu_dev,
+			 topology_core_cpumask(cpu_dev->id)))
+			pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);
+		else
+			init_opp_table[cluster] = true;
 	}
 
 	platform_device_register_simple("vexpress-spc-cpufreq", -1, NULL, 0);