Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Kevin Hilman:
 "As usual, quite a few device-tree updates in ARM land.  There was one
  minor churn in DTs due to relicensing under a dual-license, and lots
  of little additions of new peripherals, features etc, but nothing
  really exciting to call to your attention.  Some higlights, focsuing
  on support for new SoCs and boards:

   - AT91: new boards: Overkiz,  Acme Systems' Arietta G25
   - tegra: HDA support
   - bcm: new platforms: Buffalo WXR-1900DHP, SmartRG SR400ac, ASUS
     RT-AC87U
   - mvebu: new platforms: Compulab CM-A510, Armada 385-based Linksys
     boards, DLink DNS-327L
   - OMAP: new platforms: Baltos IR5221, LogicPD Torpedo, Toby-Churchill
     SL50
   - ARM: added support for Juno r1 board
   - sunxi: A33 SoC support; new boards: A23 EVB, SinA33, GA10H-A33,
     Mele A1000G
   - imx: i.MX7D SoC support; new boards: Armadeus Systems APF6,
     Gateworks GW5510, and aristainetos2 boards
   - hisilicon: hi6220 SoC support; new boards: 96boards hikey"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (462 commits)
  ARM: hisi: revert changes from hisi/hip04-dt branch
  ARM: nomadik: set proper compatible for accelerometer
  ARM64: juno: add GPIO keys
  ARM: at91/dt: sama5d4: fix dma conf for aes, sha and tdes nodes
  ARM: dts: Introduce STM32F429 MCU
  ARM: socfpga: dts: enable ethernet for Arria10 devkit
  ARM: dts: k2l: fix the netcp range size
  ARM: dts: k2e: fix the netcp range size
  ARM: dts: k2hk: fix the netcp range size
  ARM: dts: k2l-evm: Add device bindings for netcp driver
  ARM: dts: k2e-evm: Add device bindings for netcp driver
  ARM: dts: k2hk-evm: Add device bindings for netcp driver
  ARM: BCM5301X: Add DT for Asus RT-AC87U
  ARM: BCM5301X: add IRQ numbers for PCIe controller
  ARM: BCM5301X: add NAND flash chip description
  arm64: dts: Add dts files for Hisilicon Hi6220 SoC
  clk: hi6220: Document devicetree bindings for hi6220 clock
  arm64: hi6220: Document devicetree bindings for Hisilicon hi6220 SoC
  ARM: at91/dt: sama5d4ek: mci0 uses slot 0
  ARM: at91/dt: kizbox: fix mismatch LED PWM device
  ...

355 files changed, 27988 insertions, 9005 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c52002c802f8..246473a244f6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -20,9 +20,9 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	tny_a9263.dtb \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
+	at91-kizbox.dtb \
 	at91sam9g20ek.dtb \
 	at91sam9g20ek_2mmc.dtb \
-	kizbox.dtb \
 	tny_a9g20.dtb \
 	usb_a9g20.dtb \
 	usb_a9g20_lpw.dtb \
@@ -31,13 +31,16 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	at91sam9n12ek.dtb \
 	at91sam9rlek.dtb \
 	at91-ariag25.dtb \
+	at91-ariettag25.dtb \
 	at91-cosino_mega2560.dtb \
+	at91-kizboxmini.dtb \
 	at91sam9g15ek.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
 	at91sam9x25ek.dtb \
 	at91sam9x35ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
+	at91-kizbox2.dtb \
 	at91-sama5d3_xplained.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
@@ -56,13 +59,18 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b.dtb \
 	bcm2835-rpi-b-plus.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
+	bcm4708-asus-rt-ac56u.dtb \
+	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
 	bcm4708-luxul-xwc-1000.dtb \
 	bcm4708-netgear-r6250.dtb \
 	bcm4708-netgear-r6300-v2.dtb \
+	bcm4708-smartrg-sr400ac.dtb \
 	bcm47081-asus-rt-n18u.dtb \
 	bcm47081-buffalo-wzr-600dhp2.dtb \
 	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm4709-asus-rt-ac87u.dtb \
+	bcm4709-buffalo-wxr-1900dhp.dtb \
 	bcm4709-netgear-r8000.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += \
 	bcm963138dvt.dtb
@@ -113,6 +121,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
 	exynos5422-odroidxu3.dtb \
+	exynos5422-odroidxu3-lite.dtb \
 	exynos5440-sd5v1.dtb \
 	exynos5440-ssdk5440.dtb \
 	exynos5800-peach-pi.dtb
@@ -201,6 +210,9 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ts219-6282.dtb \
 	kirkwood-ts419-6281.dtb \
 	kirkwood-ts419-6282.dtb
+dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4350-hitex-eval.dtb \
+	lpc4357-ea4357-devkit.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += \
 	ea3250.dtb phy3250.dtb
 dtb-$(CONFIG_MACH_MESON6) += \
@@ -254,14 +266,18 @@ dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-tx53-x13x.dtb \
 	imx53-voipac-bsb.dtb
 dtb-$(CONFIG_SOC_IMX6Q) += \
+	imx6dl-apf6dev.dtb \
 	imx6dl-aristainetos_4.dtb \
 	imx6dl-aristainetos_7.dtb \
+	imx6dl-aristainetos2_4.dtb \
+	imx6dl-aristainetos2_7.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
 	imx6dl-gw51xx.dtb \
 	imx6dl-gw52xx.dtb \
 	imx6dl-gw53xx.dtb \
 	imx6dl-gw54xx.dtb \
+	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
 	imx6dl-hummingboard.dtb \
 	imx6dl-nitrogen6x.dtb \
@@ -277,6 +293,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-udoo.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
+	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
@@ -288,6 +305,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw53xx.dtb \
 	imx6q-gw5400-a.dtb \
 	imx6q-gw54xx.dtb \
+	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
 	imx6q-hummingboard.dtb \
 	imx6q-nitrogen6x.dtb \
@@ -313,12 +331,15 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
 	imx6sx-sabreauto.dtb \
 	imx6sx-sdb-reva.dtb \
 	imx6sx-sdb.dtb
+dtb-$(CONFIG_SOC_IMX7D) += \
+	imx7d-sdb.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
 	ls1021a-qds.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
 	vf610-colibri-eval-v3.dtb \
+	vf610m4-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
@@ -360,6 +381,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-craneboard.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
+	logicpd-torpedo-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
@@ -406,9 +428,11 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 dtb-$(CONFIG_SOC_TI81XX) += \
 	dm8168-evm.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
+	am335x-baltos-ir5221.dtb \
 	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
+	am335x-sl50.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
 	am335x-nano.dtb \
@@ -496,7 +520,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
 	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_socdk.dtb \
+	socfpga_arria10_socdk_sdmmc.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
@@ -520,32 +544,39 @@ dtb-$(CONFIG_ARCH_STI) += \
 	stih416-b2020.dtb \
 	stih416-b2020e.dtb \
 	stih418-b2199.dtb
+dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
 	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-gemei-g9.dtb \
+	sun4i-a10-hackberry.dtb \
+	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-mk802.dtb \
 	sun4i-a10-mk802ii.dtb \
-	sun4i-a10-hackberry.dtb \
-	sun4i-a10-hyundai-a7hd.dtb \
-	sun4i-a10-inet97fv2.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
 	sun4i-a10-pcduino.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-olinuxino.dtb \
-	sun5i-a13-olinuxino-micro.dtb
+	sun5i-a13-olinuxino-micro.dtb \
+	sun5i-a13-utoo-p66.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
 	sun6i-a31-hummingbird.dtb \
+	sun6i-a31-i7.dtb \
 	sun6i-a31-m9.dtb \
+	sun6i-a31-mele-a1000g-quad.dtb \
 	sun6i-a31s-cs908.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
@@ -555,15 +586,25 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-hummingbird.dtb \
 	sun7i-a20-i12-tvbox.dtb \
 	sun7i-a20-m3.dtb \
+	sun7i-a20-mk808c.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
-	sun7i-a20-pcduino3.dtb
+	sun7i-a20-orangepi.dtb \
+	sun7i-a20-orangepi-mini.dtb \
+	sun7i-a20-pcduino3.dtb \
+	sun7i-a20-pcduino3-nano.dtb \
+	sun7i-a20-wexler-tab7200.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
+	sun8i-a23-evb.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
-	sun8i-a23-ippo-q8h-v1.2.dtb
+	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a33-et-q8-v1.6.dtb \
+	sun8i-a33-ga10h-v1.1.dtb \
+	sun8i-a33-sinlinx-sina33.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
-	sun9i-a80-optimus.dtb
+	sun9i-a80-optimus.dtb \
+	sun9i-a80-cubieboard4.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-harmony.dtb \
 	tegra20-iris-512.dtb \
@@ -600,6 +641,11 @@ dtb-$(CONFIG_ARCH_U8500) += \
 	ste-hrefv60plus-tvk.dtb \
 	ste-ccu8540.dtb \
 	ste-ccu9540.dtb
+dtb-$(CONFIG_ARCH_UNIPHIER) += \
+	uniphier-ph1-sld3-ref.dtb \
+	uniphier-ph1-ld4-ref.dtb \
+	uniphier-ph1-pro4-ref.dtb \
+	uniphier-ph1-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
 	versatile-pb.dtb
@@ -624,6 +670,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
 	armada-370-db.dtb \
+	armada-370-dlink-dns327l.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-netgear-rn102.dtb \
 	armada-370-netgear-rn104.dtb \
@@ -633,6 +680,8 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
 	armada-385-db-ap.dtb \
+	armada-385-linksys-caiman.dtb \
+	armada-385-linksys-cobra.dtb \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
 	armada-388-rd.dtb
@@ -649,12 +698,12 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-openblocks-ax3-4.dtb \
 	armada-xp-synology-ds414.dtb
 dtb-$(CONFIG_MACH_DOVE) += \
-	dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-cubox-es.dtb \
 	dove-d2plug.dtb \
 	dove-d3plug.dtb \
-	dove-dove-db.dtb
+	dove-dove-db.dtb \
+	dove-sbc-a510.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6589-aquaris5.dtb \
 	mt6592-evb.dtb \
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
new file mode 100644
index 000000000000..7d36601697da
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -0,0 +1,532 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "OnRISC Baltos iR 5221";
+	compatible = "vscom,onrisc", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator@2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 8 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
+			0x024 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
+			0x028 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
+			0x02c (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
+			0x080 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
+			0x084 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
+			0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
+		>;
+	};
+
+	tps65910_pins: pinmux_tps65910_pins {
+		pinctrl-single,pins = <
+			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+		>;
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
+			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			0x168 0x0a      /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
+			0x16c 0x2a      /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */
+			0x184 0x28      /* uart1_txd, INPUT | MODE0 */
+			/*0x178 0x28*/      /* uart1_ctsn, INPUT | MODE0 */
+			/*0x17c 0x08*/      /* uart1_rtsn, OUTPUT | MODE0 */
+			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
+			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
+			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
+			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
+			/*0x188 0x2a*/      /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
+			/*0x18c 0x2a*/      /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
+			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
+			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
+			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+
+
+			/* Slave 2 */
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	status = "okay";
+
+	nand@0,0 {
+		reg = <0 0 0>; /* CS0, offset 0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		ti,nand-xfer-type = "polled";
+
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wait-on-read = "true";
+		gpmc,wait-on-write = "true";
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		elm_id = <&elm>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+	cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65910_pins>;
+	};
+
+	at24@50 {
+		compatible = "at24,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	ti,en-ck32k-xtal = <1>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	dual_emac = <1>;
+
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rmii";
+	dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <7>;
+	phy-mode = "rgmii-txid";
+	dual_emac_res_vlan = <2>;
+};
+
+&phy_sel {
+	rmii-clock-ext = <1>;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	ti,non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0 {
+	ti,no-reset-on-init;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index dbb3f4d2bf84..fec78349c1f3 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -81,6 +81,13 @@
 		>;
 	};
 
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
 			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
@@ -218,8 +225,67 @@
 		reg = <0x24>;
 	};
 
+	baseboard_eeprom: baseboard_eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		baseboard_data: baseboard_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	cape_eeprom0: cape_eeprom0@54 {
+		compatible = "at,24c256";
+		reg = <0x54>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape0_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom1: cape_eeprom1@55 {
+		compatible = "at,24c256";
+		reg = <0x55>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape1_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom2: cape_eeprom2@56 {
+		compatible = "at,24c256";
+		reg = <0x56>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape2_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+
+	cape_eeprom3: cape_eeprom3@57 {
+		compatible = "at,24c256";
+		reg = <0x57>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		cape3_data: cape_data@0 {
+			reg = <0 0x100>;
+		};
+	};
 };
 
+
 /include/ "tps65217.dtsi"
 
 &tps {
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 66342515df20..765be2766eb0 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "TI AM335x EVM";
@@ -38,6 +39,20 @@
 		regulator-boot-on;
 	};
 
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		/* WLAN_EN GPIO for this board - Bank1, pin16 */
+		gpio = <&gpio1 16 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
 	matrix_keypad: matrix_keypad@0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
@@ -176,6 +191,15 @@
 		>;
 	};
 
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
+			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
+			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+		>;
+	};
+
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
 			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
@@ -266,6 +290,25 @@
 		>;
 	};
 
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+		>;
+	};
+
+	wlan_pins: pinmux_wlan_pins {
+		pinctrl-single,pins = <
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+		>;
+	};
+
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
 			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
@@ -323,6 +366,13 @@
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -665,6 +715,37 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
+&mmc3 {
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma 12
+		&edma 13>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wlan_pins>;
+	ti,non-removable;
+	ti,needs-special-hs-handling;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&edma {
+	ti,edma-xbar-event-map = /bits/ 16 <1 12
+					    2 13>;
+};
+
 &sham {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
new file mode 100644
index 000000000000..3303c281697b
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -0,0 +1,482 @@
+/*
+ * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "Toby Churchill SL50 Series";
+	compatible = "tcl,am335x-sl50", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led@0 {
+			label = "sl50:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "sl50:red:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "sl50:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "sl50:red:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	backlight0: disp0 {
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 0 500000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <6>;
+	};
+
+	backlight1: disp1 {
+		compatible = "pwm-backlight";
+		pwms = <&ehrpwm1 1 500000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <6>;
+	};
+
+	sound {
+		compatible = "ti,da830-evm-audio";
+		ti,model = "AM335x-SL50";
+		ti,audio-codec = <&audio_codec>;
+		ti,mcasp-controller = <&mcasp0>;
+		ti,codec-clock-rate = <12000000>;
+		ti,audio-routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1R",               "Line In",
+			"LINE1L",		"Line In";
+	};
+
+	emmc_pwrseq: pwrseq@0 {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emmc_pwrseq_pins>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	};
+
+	vmmcsd_fixed: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lwb_pins>;
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* gpmc_wpn.uart4_txd */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rxd.i2c1_sda */
+			AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_txdi2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
+			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
+			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
+			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
+			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	audio_pins: pinmux_audio_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
+			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
+			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
+			AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2*/
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
+			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
+		>;
+	};
+
+	lwb_pins: pinmux_lwb_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)	/* SoundPA_en - mcasp0_fsr.gpio3_19 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)	/* nKbdOnC - gpmc_ad10.gpio0_26 */
+			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
+			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
+			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
+			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
+			/* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */
+			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */
+			/* PDI Bus - Battery system */
+			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
+			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	clock-frequency = <400000>;
+
+	audio_codec: tlv320aic3106@1b {
+		status = "okay";
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+
+		AVDD-supply = <&ldo4_reg>;
+		IOVDD-supply = <&ldo4_reg>;
+		DRVDD-supply = <&ldo4_reg>;
+		DVDD-supply = <&ldo3_reg>;
+	};
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_ctrl_mod {
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cppi41dma  {
+	status = "okay";
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+};
+
+&mcasp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&audio_pins>;
+
+	op-mode = <0>;  /* MCASP_ISS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 0 1 0
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+	>;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+	ti,pmic-shutdown-controller;
+
+	interrupt-parent = <&intc>;
+	interrupts = <7>;	/* NNMI */
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			/* VDDS_DDR */
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			/* VRTC / VIO / VDDS*/
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo2_reg: regulator@4 {
+			/* VDD_3V3AUX */
+			regulator-always-on;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		ldo3_reg: regulator@5 {
+			/* VDD_1V8 */
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			/* VDD_3V3A */
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "mii";
+};
+
+&cpsw_emac1 {
+	phy_id = <&davinci_mdio>, <1>;
+	phy-mode = "mii";
+};
+
+&mac {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&davinci_mdio {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm1_pins>;
+};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index f164dce08755..5e3f5e86ffcf 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -60,6 +60,17 @@
 			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
+
+		omap3_pmx_core2: pinmux@480025d8 {
+			compatible = "ti,omap3-padconf", "pinctrl-single";
+			reg = <0x480025d8 0x24>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			pinctrl-single,register-width = <16>;
+			pinctrl-single,function-mask = <0xff1f>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 26956cb50835..84aa30c3235a 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -21,6 +21,7 @@
 
 	aliases {
 		display0 = &lcd0;
+		serial3 = &uart3;
 	};
 
 	vmmcsd_fixed: fixedregulator-sd {
@@ -42,6 +43,15 @@
 		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
 	};
 
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
@@ -106,9 +116,21 @@
 			};
 		};
 	};
+
+	/* fixed 12MHz oscillator */
+	refclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
 };
 
 &am43xx_pinmux {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&wlan_pins_default>;
+	pinctrl-1 = <&wlan_pins_sleep>;
+
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
 			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
@@ -340,6 +362,53 @@
 			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 		>;
 	};
+
+	mmc3_pins_default: pinmux_mmc3_pins_default {
+		pinctrl-single,pins = <
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+		pinctrl-single,pins = <
+			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	wlan_pins_default: pinmux_wlan_pins_default {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+		>;
+	};
 };
 
 &i2c0 {
@@ -403,6 +472,21 @@
 			regulator-always-on;
 		};
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_0: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c1 {
@@ -422,6 +506,21 @@
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &epwmss0 {
@@ -446,6 +545,10 @@
 	status = "okay";
 };
 
+&gpio1 {
+	status = "okay";
+};
+
 &gpio3 {
 	status = "okay";
 };
@@ -468,6 +571,43 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
+&mmc3 {
+	status = "okay";
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma 30
+		&edma 31>;
+	dma-names = "tx", "rx";
+	vmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_sleep>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&edma {
+	ti,edma-xbar-event-map = /bits/ 16 <1 30
+					    2 31>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
 &usb2_phy1 {
 	status = "okay";
 };
@@ -625,7 +765,7 @@
 
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
@@ -642,7 +782,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_0>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 19f3bf271915..03542f7b5b94 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -162,7 +162,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "mx25l25635e";
+					compatible = "mx25l25635e", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <50000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
new file mode 100644
index 000000000000..af4dc548c1c0
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -0,0 +1,357 @@
+/*
+ * Device Tree file for D-Link DNS-327L
+ *
+ * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* Remaining unsolved:
+ * There's still some unknown device on i2c address 0x13
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+	model = "D-Link DNS-327L";
+	compatible = "dlink,dns327l",
+		"marvell,armada370",
+		"marvell,armada-370-xp";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+
+			nand@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partition@0 {
+					label = "u-boot";
+					/* 1.0 MiB */
+					reg = <0x0000000 0x100000>;
+					read-only;
+				};
+
+				partition@100000 {
+					label = "u-boot-env";
+					/* 128 KiB */
+					reg = <0x100000 0x20000>;
+					read-only;
+				};
+
+				partition@120000 {
+					label = "uImage";
+					/* 7 MiB */
+					reg = <0x120000 0x700000>;
+				};
+
+				partition@820000 {
+					label = "ubifs";
+					/* ~ 84 MiB */
+					reg = <0x820000 0x54e0000>;
+				};
+
+				/* Hardcoded into stock bootloader */
+				partition@5d00000 {
+					label = "failsafe-uImage";
+					/* 5 MiB */
+					reg = <0x5d00000 0x500000>;
+				};
+
+				partition@6200000 {
+					label = "failsafe-fs";
+					/* 29 MiB */
+					reg = <0x6200000 0x1d00000>;
+				};
+
+				partition@7f00000 {
+					label = "bbt";
+					/* 1 MiB for BBT */
+					reg = <0x7f00000 0x100000>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <
+			&backup_button_pin
+			&power_button_pin
+			&reset_button_pin>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		backup-button {
+			label = "Backup Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <
+			&sata_l_amber_pin
+			&sata_r_amber_pin
+			&backup_led_pin
+			/* Ensure these are managed by hardware */
+			&sata_l_white_pin
+			&sata_r_white_pin>;
+
+		pinctrl-names = "default";
+
+		sata-r-amber-pin {
+			label = "dns327l:amber:sata-r";
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		sata-l-amber-pin {
+			label = "dns327l:amber:sata-l";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+
+		backup-led-pin {
+			label = "dns327l:white:usb";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			pinctrl-0 = <&xhci_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "USB3.0 Port Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-boot-on;
+			regulator-always-on;
+			gpio = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata_r_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			pinctrl-0 = <&sata_r_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "SATA-R Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <2000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		sata_l_power: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-0 = <&sata_l_pwr_pin>;
+			pinctrl-names = "default";
+			regulator-name = "SATA-L Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			startup-delay-us = <4000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	sata_l_white_pin: sata-l-white-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+
+	sata_r_white_pin: sata-r-white-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "sata1";
+	};
+
+	sata_r_amber_pin: sata-r-amber-pin {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	sata_l_amber_pin: sata-l-amber-pin {
+		marvell,pins = "mpp53";
+		marvell,function = "gpio";
+	};
+
+	backup_led_pin: backup-led-pin {
+		marvell,pins = "mpp61";
+		marvell,function = "gpo";
+	};
+
+	xhci_pwr_pin: xhci-pwr-pin {
+		marvell,pins = "mpp13";
+		marvell,function = "gpio";
+	};
+
+	sata_r_pwr_pin: sata-r-pwr-pin {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	sata_l_pwr_pin: sata-l-pwr-pin {
+		marvell,pins = "mpp56";
+		marvell,function = "gpio";
+	};
+
+	uart1_pins: uart1-pins {
+		marvell,pins = "mpp60", "mpp61";
+		marvell,function = "uart1";
+	};
+
+	power_button_pin: power-button-pin {
+		marvell,pins = "mpp65";
+		marvell,function = "gpio";
+	};
+
+	backup_button_pin: backup-button-pin {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+
+	reset_button_pin: reset-button-pin {
+		marvell,pins = "mpp64";
+		marvell,function = "gpio";
+	};
+};
+
+/* Serial console */
+&uart0 {
+	status = "okay";
+};
+
+/* Connected to Weltrend MCU */
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		marvell,reg-init = <0x0 0x16 0x0 0x0002>,
+				<0x0 0x19 0x0 0x0077>,
+				<0x0 0x18 0x0 0x5747>;
+	};
+};
+
+&eth1 {
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c0 {
+	compatible = "marvell,mv64xxx-i2c";
+	clock-frequency = <100000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index b42b767763aa..4f4924362bf0 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -92,7 +92,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "micron,n25q064";
+					compatible = "micron,n25q064", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <20000000>;
 
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index ec96f0b36346..7f0252c580e4 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -149,7 +149,6 @@
 			};
 
 			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi", "marvell,orion-spi";
 				reg = <0x10600 0x28>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -160,7 +159,6 @@
 			};
 
 			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi", "marvell,orion-spi";
 				reg = <0x10680 0x28>;
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 00b50db57c9c..3f036bd635f4 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -139,11 +139,15 @@
 			 * board level if a different configuration is used.
 			 */
 			spi0: spi@10600 {
+				compatible = "marvell,armada-370-spi",
+						"marvell,orion-spi";
 				pinctrl-0 = <&spi0_pins1>;
 				pinctrl-names = "default";
 			};
 
 			spi1: spi@10680 {
+				compatible = "marvell,armada-370-spi",
+						"marvell,orion-spi";
 				pinctrl-0 = <&spi1_pins>;
 				pinctrl-names = "default";
 			};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 4eabc9c21f8d..5711b97e876c 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -81,7 +81,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "n25q128a13";
+					compatible = "n25q128a13", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <108000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index f076ff856d8b..67a0ab0f71e0 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -238,7 +238,8 @@
 			};
 
 			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
 				reg = <0x10600 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -249,7 +250,8 @@
 			};
 
 			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
+				compatible = "marvell,armada-375-spi",
+						"marvell,orion-spi";
 				reg = <0x10680 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 7219ac3a3d90..89f5a95954ed 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -70,7 +70,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "st,m25p128";
+					compatible = "st,m25p128", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <54000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
new file mode 100644
index 000000000000..f3cee918d285
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree include for the Linksys WRT1200AC (Caiman)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1200AC";
+	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	soc {
+		internal-regs{
+			i2c@11000 {
+
+				pca9635@68 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+					wan_amber@0 {
+						label = "caiman:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "caiman:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "caiman:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "caiman:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					usb2@5 {
+						label = "caiman:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "caiman:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "caiman:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "caiman:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "caiman:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+		};
+	};
+
+	gpio-leds {
+		power {
+			label = "caiman:white:power";
+		};
+
+		sata {
+			label = "caiman:white:sata";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
new file mode 100644
index 000000000000..111071860559
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -0,0 +1,114 @@
+/*
+ * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACv2";
+	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	soc {
+		internal-regs{
+			i2c@11000 {
+
+				pca9635@68 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+					wan_amber@0 {
+						label = "cobra:amber:wan";
+						reg = <0x0>;
+					};
+
+					wan_white@1 {
+						label = "cobra:white:wan";
+						reg = <0x1>;
+					};
+
+					wlan_2g@2 {
+						label = "cobra:white:wlan_2g";
+						reg = <0x2>;
+					};
+
+					wlan_5g@3 {
+						label = "cobra:white:wlan_5g";
+						reg = <0x3>;
+					};
+
+					usb2@5 {
+						label = "cobra:white:usb2";
+						reg = <0x5>;
+					};
+
+					usb3_1@6 {
+						label = "cobra:white:usb3_1";
+						reg = <0x6>;
+					};
+
+					usb3_2@7 {
+						label = "cobra:white:usb3_2";
+						reg = <0x7>;
+					};
+
+					wps_white@8 {
+						label = "cobra:white:wps";
+						reg = <0x8>;
+					};
+
+					wps_amber@9 {
+						label = "cobra:amber:wps";
+						reg = <0x9>;
+					};
+				};
+			};
+		};
+	};
+
+	gpio-leds {
+		power {
+			label = "cobra:white:power";
+		};
+
+		sata {
+			label = "cobra:white:sata";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
new file mode 100644
index 000000000000..74a9c6b54fa7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -0,0 +1,332 @@
+/*
+ * Device Tree include file for Armada 385 based Linksys boards
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ *
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Linksys boards based on Armada 385";
+	compatible = "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+
+			spi@10600 {
+				status = "disabled";
+			};
+
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+
+				tmp421@4c {
+					compatible = "ti,tmp421";
+					reg = <0x4c>;
+				};
+
+				pca9635@68 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "nxp,pca9635";
+					reg = <0x68>;
+				};
+			};
+
+			/* J10: VCC, NC, RX, NC, TX, GND  */
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ethernet@34000 {
+				status = "okay";
+				phy-mode = "sgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			mdio {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			/* USB part of the eSATA/USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+				usb-phy = <&usb3_phy>;
+			};
+
+			flash@d0000 {
+				status = "okay";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0000000 0x200000>;  /* 2MB */
+					read-only;
+				};
+
+				partition@100000 {
+					label = "u_env";
+					reg = <0x200000 0x40000>;    /* 256KB */
+				};
+
+				partition@140000 {
+					label = "s_env";
+					reg = <0x240000 0x40000>;    /* 256KB */
+				};
+
+				partition@900000 {
+					label = "devinfo";
+					reg = <0x900000 0x100000>;   /* 1MB */
+					read-only;
+				};
+
+				/* kernel1 overlaps with rootfs1 by design */
+				partition@a00000 {
+					label = "kernel1";
+					reg = <0xa00000 0x2800000>;  /* 40MB */
+				};
+
+				partition@1000000 {
+					label = "rootfs1";
+					reg = <0x1000000 0x2200000>;  /* 34MB */
+				};
+
+				/* kernel2 overlaps with rootfs2 by design */
+				partition@3200000 {
+					label = "kernel2";
+					reg = <0x3200000 0x2800000>; /* 40MB */
+				};
+
+				partition@3800000 {
+					label = "rootfs2";
+					reg = <0x3800000 0x2200000>; /* 34MB */
+				};
+
+				/*
+				 * 38MB, last MB is for the BBT, not writable
+				 */
+				partition@5a00000 {
+					label = "syscfg";
+					reg = <0x5a00000 0x2600000>;
+				};
+
+				/*
+				 * Unused area between "s_env" and "devinfo".
+				 * Moved here because otherwise the renumbered
+				 * partitions would break the bootloader
+				 * supplied bootargs
+				 */
+				partition@180000 {
+					label = "unused_area";
+					reg = <0x280000 0x680000>;   /* 6.5MB */
+				};
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Marvell 88W8864, 5GHz-only */
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				/* Marvell 88W8864, 2GHz-only */
+				status = "okay";
+			};
+		};
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_xhci0_vbus>;
+	};
+
+	reg_xhci0_vbus: xhci0-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-name = "xhci0-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&keys_pin>;
+		pinctrl-names = "default";
+
+		button@1 {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2 {
+			label = "Factory Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&power_led_pin &sata_led_pin>;
+		pinctrl-names = "default";
+
+		power {
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		sata {
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	dsa@0 {
+		compatible = "marvell,dsa";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		dsa,ethernet = <&eth2>;
+		dsa,mii-bus = <&mdio>;
+
+		switch@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+			};
+		};
+	};
+};
+
+&pinctrl {
+	keys_pin: keys-pin {
+		marvell,pins = "mpp24", "mpp47";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp55";
+		marvell,function = "gpio";
+	};
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	xhci0_vbus_pins: xhci0-vbus-pins {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 51d1623de53e..91ac8c118f37 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -73,7 +73,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "w25q32";
+					compatible = "w25q32", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <108000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index 78514ab0b47a..fd4f6fd8a2e8 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -69,7 +69,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "st,m25p128";
+					compatible = "st,m25p128", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <50000000>;
 					m25p,fast-read;
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index 1dc6e2341cc2..b657b1687e5f 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -74,7 +74,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "st,m25p128";
+					compatible = "st,m25p128", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <108000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 218a2acd36e5..04ecfe6e2bc6 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -167,7 +167,8 @@
 			};
 
 			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
+				compatible = "marvell,armada-380-spi",
+						"marvell,orion-spi";
 				reg = <0x10600 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -178,7 +179,8 @@
 			};
 
 			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
+				compatible = "marvell,armada-380-spi",
+						"marvell,orion-spi";
 				reg = <0x10680 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -495,7 +497,7 @@
 				status = "disabled";
 			};
 
-			mdio@72004 {
+			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index bbf83756c43c..788c3badb681 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -73,7 +73,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <0>;
-					compatible = "n25q128a13";
+					compatible = "n25q128a13", "jedec,spi-nor";
 					reg = <0>;
 					spi-max-frequency = <108000000>;
 
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index ecd1318109ba..fc9864f85fc2 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -128,7 +128,8 @@
 			};
 
 			spi0: spi@10600 {
-				compatible = "marvell,orion-spi";
+				compatible = "marvell,armada-390-spi",
+						"marvell,orion-spi";
 				reg = <0x10600 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -139,7 +140,8 @@
 			};
 
 			spi1: spi@10680 {
-				compatible = "marvell,orion-spi";
+				compatible = "marvell,armada-390-spi",
+						"marvell,orion-spi";
 				reg = <0x10680 0x50>;
 				#address-cells = <1>;
 				#size-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index dfd782b44e50..60bbfe32bb80 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -140,7 +140,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "n25q128a13";
+					compatible = "n25q128a13", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <108000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 103782407618..7dd900f158be 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -222,7 +222,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "m25p64";
+					compatible = "m25p64", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <20000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 565227eacf06..bf724ca96a33 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -227,7 +227,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "n25q128a13";
+					compatible = "n25q128a13", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <108000000>;
 				};
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 6063428fa6a0..20267ad2f61e 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -114,7 +114,7 @@
 				spi-flash@0 {
 					#address-cells = <1>;
 					#size-cells = <1>;
-					compatible = "micron,n25q064";
+					compatible = "micron,n25q064", "jedec,spi-nor";
 					reg = <0>; /* Chip select 0 */
 					spi-max-frequency = <20000000>;
 
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 013d63f69e36..e78ce4ab6b75 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -85,10 +85,18 @@
 			};
 
 			spi0: spi@10600 {
+				compatible = "marvell,armada-xp-spi",
+						"marvell,orion-spi";
 				pinctrl-0 = <&spi0_pins>;
 				pinctrl-names = "default";
 			};
 
+			spi1: spi@10680 {
+				compatible = "marvell,armada-xp-spi",
+						"marvell,orion-spi";
+			};
+
+
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x100>;
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index 5a660d0faf42..b1ad7cf6ac02 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -8,6 +8,12 @@
 		reg = <0xe000e100 0xc00>;
 	};
 
+	systick: timer@e000e010 {
+		compatible = "arm,armv7m-systick";
+		reg = <0xe000e010 0x10>;
+		status = "disabled";
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
new file mode 100644
index 000000000000..c514502081d2
--- /dev/null
+++ b/arch/arm/boot/dts/at91-ariettag25.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree file for Arietta G25
+ * This device tree is minimal, to activate more peripherals, see:
+ * http://dts.acmesystems.it/arietta/
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+/ {
+	model = "Acme Systems Arietta G25";
+	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	aliases {
+		serial0 = &dbgu;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f0008000 {
+				pinctrl-0 = <
+				  &pinctrl_mmc0_slot0_clk_cmd_dat0
+				  &pinctrl_mmc0_slot0_dat1_3>;
+				status = "okay";
+
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+				};
+			};
+
+			usb2: gadget@f803c000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			rtc@fffffeb0 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00600000 {
+			status = "okay";
+			num-ports = <3>;
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		arietta_led {
+			label = "arietta_led";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
new file mode 100644
index 000000000000..bf18ece0c027
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -0,0 +1,159 @@
+/*
+ * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
+ *
+ * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
+ *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox";
+	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x2000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			macb0: ethernet@fffc4000 {
+				phy-mode = "mii";
+				pinctrl-0 = <&pinctrl_macb_rmii
+				             &pinctrl_macb_rmii_mii_alt>;
+				status = "okay";
+			};
+
+			usart3: serial@fffd0000 {
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				timeout-sec = <15>;
+				atmel,max-heartbeat-sec = <16>;
+				atmel,min-heartbeat-sec = <0>;
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00500000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+
+		user {
+			label = "PB_USER";
+			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
+		};
+	};
+
+	i2c@0 {
+		status = "okay";
+
+		rtc: pcf8563@51 {
+			compatible = "nxp,pcf8563";
+			reg = <0x51>;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		network_green {
+			label = "pwm:green:network";
+			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		network_red {
+			label = "pwm:red:network";
+			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_green {
+			label = "pwm:green:user";
+			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_red {
+			label = "pwm:red:user";
+			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	tcb_pwm: pwm {
+		compatible = "atmel,tcb-pwm";
+		#pwm-cells = <3>;
+		tc-block = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa0
+			     &pinctrl_tcb1_tioa1
+			     &pinctrl_tcb1_tioa2
+			     &pinctrl_tcb1_tiob0>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
new file mode 100644
index 000000000000..f0b1563cb3f1
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2.dts
@@ -0,0 +1,216 @@
+/*
+ * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d31.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox 2";
+	compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			i2c1: i2c@f0018000 {
+				status = "okay";
+
+				pmic: act8865@5b {
+					compatible = "active-semi,act8865";
+					reg = <0x5b>;
+					status = "okay";
+
+					regulators {
+						vcc_1v8_reg: DCDC_REG1 {
+							regulator-name = "VCC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						vcc_1v2_reg: DCDC_REG2 {
+							regulator-name = "VCC_1V2";
+							regulator-min-microvolt = <1200000>;
+							regulator-max-microvolt = <1200000>;
+							regulator-always-on;
+						};
+
+						vcc_3v3_reg: DCDC_REG3 {
+							regulator-name = "VCC_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vddfuse_reg: LDO_REG1 {
+							regulator-name = "FUSE_2V5";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+						};
+
+						vddana_reg: LDO_REG2 {
+							regulator-name = "VDDANA";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						vled_reg: LDO_REG3 {
+							regulator-name = "VLED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-always-on;
+						};
+
+						v3v8_rf_reg: LDO_REG4 {
+							regulator-name = "V3V8_RF";
+							regulator-min-microvolt = <3800000>;
+							regulator-max-microvolt = <3800000>;
+							regulator-always-on;
+						};
+					};
+				};
+			};
+
+			usart0: serial@f001c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f0020000 {
+				status = "okay";
+			};
+
+			pwm0: pwm@f002c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+					     &pinctrl_pwm0_pwmh1_1
+					     &pinctrl_pwm0_pwmh2_0>;
+				status = "okay";
+			};
+
+			adc0: adc@f8018000 {
+				atmel,adc-vref = <3333>;
+				status = "okay";
+			};
+
+			usart2: serial@f8020000 {
+				status = "okay";
+			};
+
+			macb1: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb1: ohci@00600000 {
+			status = "okay";
+		};
+
+		usb2: ehci@00700000 {
+			status = "okay";
+		};
+
+		nand0: nand@60000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			gpio-key,wakeup;
+		};
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+
+		user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			gpio-key,wakeup;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		blue {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
new file mode 100644
index 000000000000..9f72b4932634
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini.dts
@@ -0,0 +1,129 @@
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9g25.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox mini";
+	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			pwm0: pwm@f8034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+					     &pinctrl_pwm0_pwm1_1>;
+				status = "okay";
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			watchdog@fffffe40 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@00600000 {
+			num-ports = <1>;
+			status = "okay";
+		};
+
+		usb1: ehci@00700000 {
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			atmel,has-pmecc;
+			atmel,pmecc-cap = <4>;
+			atmel,pmecc-sector-size = <512>;
+			nand-on-flash-bbt;
+			status = "okay";
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			gpio-key,wakeup;
+		};
+
+		reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			gpio-key,wakeup;
+		};
+	};
+
+	pwm_leds {
+		compatible = "pwm-leds";
+
+		green {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		red {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index 9991240b7438..d81474e0bcd6 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -14,7 +14,7 @@
 	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -35,6 +35,8 @@
 		apb {
 			mmc0: mmc@f0000000 {
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -43,6 +45,17 @@
 				};
 			};
 
+			mmc1: mmc@f8000000 {
+				vmmc-supply = <&vcc_3v3_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "disabled";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
+				};
+			};
+
 			spi0: spi@f0004000 {
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
@@ -105,7 +118,13 @@
 
 			macb0: ethernet@f0028000 {
 				phy-mode = "rgmii";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				status = "okay";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+				};
 			};
 
 			pwm0: pwm@f002c000 {
@@ -215,12 +234,6 @@
 					};
 				};
 			};
-
-			pmc: pmc@fffffc00 {
-				main: mainck {
-					clock-frequency = <12000000>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
@@ -284,6 +297,14 @@
 		};
 	};
 
+	vcc_mmc0_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index c740e1a2a3a5..22ad7c959103 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -50,7 +50,8 @@
 	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+		bootargs = "ignore_loglevel earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -106,6 +107,8 @@
 			mmc1: mmc@fc000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -122,6 +125,11 @@
 				status = "okay";
 			};
 
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 21 0>;
+				status = "okay";
+			};
+
 			adc0: adc@fc034000 {
 				atmel,adc-vref = <3300>;
 				status = "okay";
@@ -238,4 +246,22 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	vcc_3v3_reg: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc1_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index 89ef4a540db5..d782f2926b73 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -50,7 +50,8 @@
 	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 ignore_loglevel earlyprintk";
+		bootargs = "ignore_loglevel earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -108,8 +109,8 @@
 			mmc0: mmc@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
-				slot@1 {
-					reg = <1>;
+				slot@0 {
+					reg = <0>;
 					bus-width = <4>;
 					cd-gpios = <&pioE 5 0>;
 				};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 6d0fa9b87f46..e3cfb9972f54 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -940,8 +940,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 2a5d21247d7e..8dab4b75ca97 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -12,6 +12,10 @@
 	model = "Atmel AT91RM9200 evaluation kit";
 	compatible = "atmel,at91rm9200ek", "atmel,at91rm9200";
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	memory {
 		reg = <0x20000000 0x4000000>;
 	};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d88fe62a2b2e..4bc347549102 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -1008,8 +1008,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index bf8d1856a55a..b2c44a07a3d0 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -75,8 +75,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&ohci_clk>, <&hclk0>, <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index f4a765729c7a..2e92ac020f23 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -13,7 +13,8 @@
 	compatible = "atmel,at91sam9261ek", "atmel,at91sam9261", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs rw";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 111889b556cf..e36d966ef5e8 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -1010,8 +1010,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 5cf93eecd8f1..23381276ffb8 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -13,7 +13,8 @@
 	compatible = "atmel,at91sam9263ek", "atmel,at91sam9263", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index dfaacb113f2e..57548a2c5a1e 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -10,7 +10,8 @@
 / {
 
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+		bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 70e59c5ceb2f..d260ba779ae5 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1291,8 +1291,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -1300,8 +1300,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck";
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 33ce7ca2c404..1375d3362603 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -15,7 +15,8 @@
 	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "mem=64M root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index a9e35dfc12d9..5c2a8c8c8bd4 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -949,9 +949,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
-				 <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index 6e067c8a3502..eab17fcace6d 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -14,7 +14,8 @@
 	compatible = "atmel,at91sam9n12ek", "atmel,at91sam9n12", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=jffs2";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index ebfd5ce9cb38..c9920c64791c 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -1065,13 +1065,6 @@
 				};
 			};
 
-			rtc@fffffeb0 {
-				compatible = "atmel,at91rm9200-rtc";
-				reg = <0xfffffeb0 0x40>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				status = "disabled";
-			};
-
 			rtc@fffffd20 {
 				compatible = "atmel,at91sam9260-rtt";
 				reg = <0xfffffd20 0x10>;
@@ -1085,6 +1078,14 @@
 				reg = <0xfffffd60 0x10>;
 				status = "disabled";
 			};
+
+			rtc@fffffe00 {
+				compatible = "atmel,at91rm9200-rtc";
+				reg = <0xfffffe00 0x40>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				status = "disabled";
+			};
+
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 9be5b540eebf..558c9f220bed 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -13,7 +13,8 @@
 	compatible = "atmel,at91sam9rlek", "atmel,at91sam9rl", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+		bootargs = "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=5 rw";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -181,13 +182,11 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				main: mainck {
-					clock-frequency = <12000000>;
-				};
+			watchdog@fffffd40 {
+				status = "okay";
 			};
 
-			watchdog@fffffd40 {
+			rtc@fffffe00 {
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 3aa56ae3410a..7521bdf17ef2 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -505,7 +505,7 @@
 
 					pinctrl_usart1_sck: usart1_sck-0 {
 						atmel,pins =
-							<AT91_PIOC 28 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
+							<AT91_PIOC 29 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC29 periph C */
 					};
 				};
 
@@ -694,6 +694,52 @@
 					};
 				};
 
+				pwm0 {
+					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
+						atmel,pins =
+							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
+						atmel,pins =
+							<AT91_PIOC 10 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
+						atmel,pins =
+							<AT91_PIOC 18 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
+						atmel,pins =
+							<AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
+						atmel,pins =
+							<AT91_PIOC 11 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
+						atmel,pins =
+							<AT91_PIOC 19 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
+						atmel,pins =
+							<AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
+						atmel,pins =
+							<AT91_PIOC 20 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
+						atmel,pins =
+							<AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+					pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
+						atmel,pins =
+							<AT91_PIOC 21 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+					};
+				};
+
 				tcb0 {
 					pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
 						atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -1176,8 +1222,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -1185,8 +1231,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ehci_clk", "uhpck";
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index cc83a37a7311..d237c462dfc6 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -13,7 +13,8 @@
 	compatible = "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	ahb {
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index c20cf537f5a5..24c935c72e5e 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 7b52c33ea69a..e1ac07a16f92 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -212,6 +212,18 @@
 		status = "disabled";
 	};
 
+	nand: nand@18046000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
+
 	gic: interrupt-controller@19021000 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index e479515099c3..668442b1bda5 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
@@ -25,6 +25,6 @@
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
 		brcm,pins = <18 19 20 21>;
-		brcm,function = <4>; /* alt0 */
+		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index bafa46fc226a..ee89b79426cf 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,5 +1,5 @@
 /dts-v1/;
-/include/ "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
@@ -18,6 +18,6 @@
 	/* I2S interface */
 	i2s_alt2: i2s_alt2 {
 		brcm,pins = <28 29 30 31>;
-		brcm,function = <6>; /* alt2 */
+		brcm,function = <BCM2835_FSEL_ALT2>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index c7064487017d..46780bb48bbf 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,4 +1,4 @@
-/include/ "bcm2835.dtsi"
+#include "bcm2835.dtsi"
 
 / {
 	memory {
@@ -21,17 +21,17 @@
 
 	gpioout: gpioout {
 		brcm,pins = <6>;
-		brcm,function = <1>; /* GPIO out */
+		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
 	};
 
 	alt0: alt0 {
 		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
-		brcm,function = <4>; /* alt0 */
+		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 
 	alt3: alt3 {
 		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <7>; /* alt3 */
+		brcm,function = <BCM2835_FSEL_ALT3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 3342cb1407bc..301c73f4ca33 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,4 +1,5 @@
-/include/ "skeleton.dtsi"
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include "skeleton.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
@@ -14,6 +15,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
 
 		timer@7e003000 {
 			compatible = "brcm,bcm2835-system-timer";
@@ -60,6 +62,13 @@
 			reg = <0x7e104000 0x10>;
 		};
 
+		mailbox: mailbox@7e00b800 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
 		gpio: gpio@7e200000 {
 			compatible = "brcm,bcm2835-gpio";
 			reg = <0x7e200000 0xb4>;
@@ -112,7 +121,7 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@20205000 {
+		i2c0: i2c@7e205000 {
 			compatible = "brcm,bcm2835-i2c";
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
new file mode 100644
index 000000000000..112a5a834ddc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -0,0 +1,97 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC56U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac56u", "brcm,bcm4708";
+	model = "Asus RT-AC56U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		all {
+			label = "bcm53xx:blue:all";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
new file mode 100644
index 000000000000..3600f56f46f4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -0,0 +1,84 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC68U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac68u", "brcm,bcm4708";
+	model = "Asus RT-AC68U (BCM4708)";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		logo {
+			label = "bcm53xx:white:logo";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index b359c1e6178e..24f0ab59bf1b 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
@@ -47,6 +48,12 @@
 	leds {
 		compatible = "gpio-leds";
 
+		usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
 		power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index 946c728c4eb7..f03939311717 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "luxul,xwc-1000", "brcm,bcm4708";
@@ -23,12 +24,8 @@
 		reg = <0x00000000 0x08000000>;
 	};
 
-	axi@18000000 {
-		nand@28000 {
-			reg = <0x00028000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
+	nand: nand@18028000 {
+		nandcs@0 {
 			partition@0 {
 				label = "ubi";
 				reg = <0x00000000 0x08000000>;
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 2ed9e5794785..326ce8f4e49c 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "netgear,r6250v1", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 39910428246a..3a94606d042b 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "netgear,r6300v2", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
new file mode 100644
index 000000000000..d6a033b97c70
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -0,0 +1,120 @@
+/*
+ * Broadcom BCM470X / BCM5301X arm platform code.
+ * DTS for SmartRG SR400ac
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "smartrg,sr400ac", "brcm,bcm4708";
+	model = "SmartRG SR400ac";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		usb3-green {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		status-red {
+			label = "bcm53xx:red:status";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		status-green {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		status-blue {
+			label = "bcm53xx:blue:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-red {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 0ee85ea10bb2..71b98cfaf944 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index db9131e03268..bb0cb0bfafaf 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 7d6868acb1c6..184fd9214110 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "buffalo,wzr-900dhp", "brcm,bcm47081", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
new file mode 100644
index 000000000000..aedf3c426e1f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -0,0 +1,65 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-AC87U
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Asus RT-AC87U";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan {
+			label = "bcm53xx:red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
new file mode 100644
index 000000000000..2a92e8d5ab34
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -0,0 +1,128 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WXR-1900DHP
+ *
+ * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "buffalo,wxr-1900dhp", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Buffalo WXR-1900DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory {
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		router-amber {
+			label = "bcm53xx:amber:router";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		router-white {
+			label = "bcm53xx:white:router";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless-amber {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		wireless-white {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power {
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		sw_ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index ea26dd3ec03a..446c586cd473 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -10,6 +10,7 @@
 /dts-v1/;
 
 #include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "netgear,r8000", "brcm,bcm4709", "brcm,bcm4708";
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
new file mode 100644
index 000000000000..d10781e36f54
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -0,0 +1,24 @@
+/*
+ * Broadcom BCM470X / BCM5301X Nand chip defaults.
+ *
+ * This should be included if the NAND controller is on chip select 0
+ * and uses 8 bit ECC.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/ {
+	nand@18028000 {
+		nandcs@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 78aec6270c2f..21fefd4cdc25 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -108,6 +108,30 @@
 			/* ChipCommon */
 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 
+			/* PCIe Controller 0 */
+			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 1 */
+			<0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 2 */
+			<0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
 			/* USB 2.0 Controller */
 			<0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
 
@@ -143,4 +167,16 @@
 			#gpio-cells = <2>;
 		};
 	};
+
+	nand: nand@18028000 {
+		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
+		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
+		reg-names = "nand", "iproc-idm", "iproc-ext";
+		interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		brcm,nand-has-wp;
+	};
 };
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index f46329c8ad75..34cd64051250 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -26,6 +26,7 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <0>;
+			enable-method = "brcm,bcm63138";
 		};
 
 		cpu@1 {
@@ -33,6 +34,8 @@
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
 			reg = <1>;
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
 		};
 	};
 
@@ -105,6 +108,18 @@
 			reg = <0x1e620 0x20>;
 			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		pmb0: reset-controller@4800c0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800c0 0x10>;
+			#reset-cells = <2>;
+		};
+
+		pmb1: reset-controller@4800e0 {
+			compatible = "brcm,bcm63138-pmb";
+			reg = <0x4800e0 0x10>;
+			#reset-cells = <2>;
+		};
 	};
 
 	/* Legacy UBUS base */
@@ -114,6 +129,11 @@
 		#size-cells = <1>;
 		ranges = <0 0xfffe8000 0x8100>;
 
+		timer: timer@80 {
+			compatible = "brcm,bcm6328-timer", "syscon";
+			reg = <0x80 0x3c>;
+		};
+
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
@@ -131,5 +151,28 @@
 			clock-names = "periph";
 			status = "disabled";
 		};
+
+		nand: nand@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+			interrupts = <GIC_SPI 38 0>;
+			interrupt-names = "nand";
+		};
+
+		bootlut: bootlut@8000 {
+			compatible = "brcm,bcm63138-bootlut";
+			reg = <0x8000 0x50>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&timer>;
+			offset = <0x34>;
+			mask = <1>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 9eec2ac1112f..0bb8d17e4c2d 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -12,3 +12,26 @@
 		      <0x00 0x80000000 0x00 0x40000000>;
 	};
 };
+
+&nand {
+	status = "okay";
+
+	nandcs@1 {
+		compatible = "brcm,nandcs";
+		reg = <1>;
+		nand-ecc-step-size = <512>;
+		nand-ecc-strength = <8>;
+		nand-on-flash-bbt;
+
+		#size-cells = <2>;
+		#address-cells = <2>;
+
+		flash1.rootfs0@0 {
+			reg = <0x0 0x0 0x0 0x80000000>;
+		};
+
+		flash1.rootfs1@80000000 {
+			reg = <0x0 0x80000000 0x0 0x80000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 39ac7840d7ee..58dcd666257c 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -108,6 +108,65 @@
 			brcm,int-map-mask = <0x25c>, <0x7000000>;
 			brcm,int-fwd-mask = <0x70000>;
 		};
+
+		hif_intr2_intc: interrupt-controller@3e1000 {
+			compatible = "brcm,l2-intc";
+			reg = <0x3e1000 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x20 0x0>;
+			interrupt-parent = <&gic>;
+			interrupt-names = "hif";
+		};
+
+		nand: nand@3e2800 {
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg-names = "nand", "flash-dma";
+			reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
+			interrupt-parent = <&hif_intr2_intc>;
+			interrupts = <24>, <4>;
+			interrupt-names = "nand_ctlrdy", "flash_dma_done";
+		};
+
+		sata@45a000 {
+			compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x45a000 0xa9c>, <0x458040 0x24>;
+			interrupts = <GIC_SPI 30 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+			};
+		};
+
+		sata_phy: sata-phy@458100 {
+			compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+			reg = <0x458100 0x1f00>;
+			reg-names = "phy";
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 
 	smpboot {
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index c9eb8565eac5..2f63052f9d48 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -58,4 +58,20 @@
 	uart3: serial@18023000 {
 		status = "okay";
 	};
+
+	nand: nand@18046000 {
+		nandcs@1 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			nand-on-flash-bbt;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nand-ecc-strength = <24>;
+			nand-ecc-step-size = <1024>;
+
+			brcm,nand-oob-sector-size = <27>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 69c93395ecd2..370aa2cfddf2 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -28,3 +28,15 @@
 &serial1 {
 	status = "okay";
 };
+
+&nand {
+	status = "okay";
+
+	nandcs@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		brcm,nand-oob-sectors-size = <16>;
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 86d85d8896a3..5c99fb3a4d10 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -3,9 +3,37 @@
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2. This program is licensed "as is" without any
+ *     warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 63d00a63cfa6..da9adf8f69da 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -6,9 +6,37 @@
  * based on GPL'ed 2.6 kernel sources
  *  (c) Marvell International Ltd.
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2. This program is licensed "as is" without any
+ *     warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 30270be4d0c9..772165ad0a52 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -3,9 +3,37 @@
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2. This program is licensed "as is" without any
+ *     warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 81b670ac494a..cb2a97cb9579 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -6,9 +6,37 @@
  * based on GPL'ed 2.6 kernel sources
  *  (c) Marvell International Ltd.
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2. This program is licensed "as is" without any
+ *     warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index a98ac1bd8f65..4a749e5b3b44 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -1,9 +1,37 @@
 /*
  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2. This program is licensed "as is" without any
+ *     warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index be5397288d24..703ce384e0d7 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -1,9 +1,37 @@
 /*
  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
  *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2. This program is licensed "as is" without any
+ *     warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/berlin2q.h>
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index 490c08075e67..af333261d046 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -82,6 +82,12 @@
 		clocks = <&main_clk>;
 	};
 
+	rtc@f0000c30 {
+		compatible = "cnxt,cx92755-rtc";
+		reg = <0xf0000c30 0x18>;
+		interrupts = <25>;
+	};
+
 	uc_regs: syscon@f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
@@ -110,4 +116,15 @@
 		interrupts = <46>;
 		status = "disabled";
 	};
+
+	i2c: i2c@f0000120 {
+		compatible = "cnxt,cx92755-i2c";
+		reg = <0xf0000120 0x10>;
+		interrupts = <28>;
+		clocks = <&main_clk>;
+		clock-frequency = <100000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index f33bf5635d47..90d52cc416dc 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -72,3 +72,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&i2c {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts
deleted file mode 100644
index 50c0d6904497..000000000000
--- a/arch/arm/boot/dts/dove-cm-a510.dts
+++ /dev/null
@@ -1,38 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "Compulab CM-A510";
-	compatible = "compulab,cm-a510", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-};
-
-&uart0 { status = "okay"; };
-&uart1 { status = "okay"; };
-&sdio0 { status = "okay"; };
-&sdio1 { status = "okay"; };
-&sata0 { status = "okay"; };
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&i2c0 {
-	  status = "okay";
-};
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
new file mode 100644
index 000000000000..59b4056b478f
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -0,0 +1,195 @@
+/*
+ * Device Tree include for Compulab CM-A510 System-on-Module
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * The CM-A510 comes with several optional components:
+ *
+ * Memory options:
+ *  D512: 512M
+ *  D1024: 1G
+ *
+ * NAND options:
+ *  N512: 512M NAND
+ *
+ * Ethernet options:
+ *  E1: PHY RTL8211D on internal GbE (SMI address 0x03)
+ *  E2: Additional ethernet NIC RTL8111D on PCIe1
+ *
+ * Audio options:
+ *  A: TI TLV320AIC23b audio codec (I2C address 0x1a)
+ *
+ * Touchscreen options:
+ *  I: TI TSC2046 touchscreen controller (on SPI1)
+ *
+ * USB options:
+ *  U2: 2 dual-role USB2.0 ports
+ *  U4: 2 additional USB2.0 host ports (via USB1)
+ *
+ * WiFi options:
+ *  W: Broadcom BCM4319 802.11b/g/n (USI WM-N-BM-01 on SDIO1)
+ *
+ * GPIOs used on CM-A510:
+ *   1 GbE PHY reset (active low)
+ *   3 WakeUp
+ *   8 PowerOff (active low)
+ *  13 Touchscreen pen irq (active low)
+ *  65 System LED (active high)
+ *  69 USB Hub reset (active low)
+ *  70 WLAN reset (active low)
+ *  71 WLAN regulator (active high)
+ */
+
+#include "dove.dtsi"
+
+/ {
+	model = "Compulab CM-A510";
+	compatible = "compulab,cm-a510", "marvell,dove";
+
+	/*
+	 * Set the minimum memory size here and let the
+	 * bootloader set the real size.
+	 */
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		/* Set upper NAND data bit to GPO */
+		pinctrl-0 = <&pmx_nand_gpo>;
+		pinctrl-names = "default";
+
+		system {
+			label = "cm-a510:system:green";
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			default-state = "keep";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		wifi_power: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "WiFi Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Optional RTL8211D GbE PHY on SMI address 0x03 */
+&ethphy {
+	reg = <3>;
+	status = "disabled";
+};
+
+&i2c0 {
+	/* Optional TI TLV320AIC23b audio codec */
+	opt_audio: audio@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		status = "disabled";
+	};
+};
+
+/* Optional RTL8111D GbE NIC on PCIe1 */
+&pcie { status = "disabled"; };
+
+&pcie1 {
+	pinctrl-0 = <&pmx_pcie1_clkreq>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&pinctrl {
+	pmx_uart2: pmx-uart2 {
+		marvell,pins = "mpp14", "mpp15";
+		marvell,function = "uart2";
+	};
+};
+
+/* Optional Broadcom BCM4319 802.11b/g/n WiFi module */
+&sdio1 {
+	non-removable;
+	vmmc-supply = <&wifi_power>;
+	reset-gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&spi0 {
+	status = "okay";
+
+	/* 1M Flash Winbond W25Q80BL */
+	flash@0 {
+		compatible = "winbond,w25q80";
+		spi-max-frequency = <80000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	pinctrl-0 = <&pmx_spi1_20_23>;
+	pinctrl-names = "default";
+	status = "disabled";
+
+	/* Optional TI TSC2046 touchscreen controller */
+	opt_touch: touchscreen@0 {
+		compatible = "ti,tsc2046";
+		spi-max-frequency = <2500000>;
+		reg = <0>;
+		pinctrl-0 = <&pmx_gpio_13>;
+		pinctrl-names = "default";
+		interrupts-extended = <&gpio0 13 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&uart2 {
+	pinctrl-0 = <&pmx_uart2>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts
new file mode 100644
index 000000000000..288e707dea99
--- /dev/null
+++ b/arch/arm/boot/dts/dove-sbc-a510.dts
@@ -0,0 +1,182 @@
+/*
+ * Device Tree file for Compulab SBC-A510 Single Board Computer
+ *
+ * Copyright (C) 2015, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * SBC-A510 comprises a PCA9555 I2C GPIO expander its GPIO lines connected to
+ *
+ * 0.0 USB0 VBUS_EN (active high)
+ * 0.1 USB0 VBUS_GOOD
+ * 0.2 DVI transmitter TI TFP410 MSEN
+ * 0.3 DVI transmitter TI TFP410 PD# (active low power down)
+ * 0.4 LVDS transmitter DS90C365 PD# (active low power down)
+ * 0.5 LCD nRST (active low reset)
+ * 0.6 PCIe0 nRST (active low reset)
+ * 0.7 mini-PCIe slot W_DISABLE#
+ *
+ * 1.0 MMC WP
+ * 1.1 Camera Input FPC FLASH_STB and P21.5
+ * 1.2 Camera Input FPC WE        and P21.22
+ * 1.3 MMC VCC_EN (active high)   and P21.7
+ * 1.4 Camera Input FPC AFTR_RST  and P21.17
+ * 1.5 Camera Input FPC OE        and P21.19
+ * 1.6 Camera Input FPC SNPSHT    and P21.6
+ * 1.7 Camera Input FPC SHTR      and P21.10
+ */
+
+/dts-v1/;
+
+#include "dove-cm-a510.dtsi"
+
+/ {
+	model = "Compulab SBC-A510";
+	compatible = "compulab,sbc-a510", "compulab,cm-a510", "marvell,dove";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	regulators {
+		usb0_power: regulator@2 {
+			compatible = "regulator-fixed";
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio_ext 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		mmc_power: regulator@3 {
+			compatible = "regulator-fixed";
+			regulator-name = "MMC Power";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio_ext 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+/* Ethernet0 depends on CM-A510 option E1 */
+&mdio { status = "disabled"; };
+&eth { status = "disabled"; };
+&ethphy { status = "disabled"; };
+
+/*
+ * USB port 0 can be powered and monitored by I2C GPIO expander:
+ *  VBUS_ENABLE on GPIO0, VBUS_GOOD on GPIO1
+ */
+&ehci0 {
+	status = "okay";
+	vbus-supply = <&usb0_power>;
+};
+
+/* USB port 1 (and ports 2, 3 if CM-A510 has U4 option) */
+&ehci1 { status = "okay"; };
+
+/*
+ * I2C bus layout:
+ * i2c0:
+ *  - Audio Codec, 0x1a (option from CM-A510)
+ *  - DVI transmitter TI TFP410, 0x39
+ *  - HDMI/DVI DDC channel
+ * i2c1:
+ *  - GPIO expander, NXP PCA9555, 0x20
+ *  - VGA DDC channel
+ */
+&i2c {
+	pinctrl-0 = <&pmx_i2c1>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	/* TI TFP410 DVI transmitter */
+	dvi: video@39 {
+		compatible = "ti,tfp410";
+		reg = <0x39>;
+		powerdown-gpio = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* NXP PCA9555 GPIO expander */
+	gpio_ext: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie { status = "okay"; };
+
+/*
+ * PCIe0 can be configured by Jumper E1 to be either connected to
+ * a mini-PCIe slot or a Pericom PI7C9X111 PCIe-to-PCI bridge.
+ */
+&pcie0 {
+	status = "okay";
+	pinctrl-0 = <&pmx_pcie0_clkreq>;
+	pinctrl-names = "default";
+	reset-gpios = <&gpio_ext 6 GPIO_ACTIVE_LOW>;
+};
+
+/* Ethernet1 depends on CM-A510 option E2 */
+&pcie1 { status = "disabled"; };
+
+/* SATA connector */
+&sata0 { status = "okay"; };
+
+/*
+ * SDIO0 is connected to a MMC/SD/SDIO socket, I2C GPIO expander has
+ *  VCC_MMC_ENABLE on GPIO13, MMC_WP on GPIO10
+ */
+&sdio0 {
+	vmmc-supply = <&mmc_power>;
+	wp-gpios = <&gpio_ext 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* UART0 on RS232 mini-connector */
+&uart0 { status = "okay"; };
+/* UART2 on pin headers */
+&uart2 { status = "okay"; };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 9ad829523a13..38b1f7e6004e 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -33,6 +33,42 @@
 		marvell,tauros2-cache-features = <0>;
 	};
 
+	i2c-mux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c>;
+
+		pinctrl-names = "i2c0", "i2c1", "i2c2";
+		pinctrl-0 = <&pmx_i2cmux_0>;
+		pinctrl-1 = <&pmx_i2cmux_1>;
+		pinctrl-2 = <&pmx_i2cmux_2>;
+
+		i2c0: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		i2c1: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c1 on i2c controller node */
+			status = "disabled";
+		};
+
+		i2c2: i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			/* Requires pmx_i2c2 on i2c controller node */
+			status = "disabled";
+		};
+	};
+
 	mbus {
 		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
 		#address-cells = <2>;
@@ -123,7 +159,7 @@
 				status = "disabled";
 			};
 
-			i2c0: i2c-ctrl@11000 {
+			i2c: i2c-ctrl@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
@@ -132,7 +168,7 @@
 				clock-frequency = <400000>;
 				timeout-ms = <1000>;
 				clocks = <&core_clk 0>;
-				status = "disabled";
+				status = "okay";
 			};
 
 			uart0: serial@12000 {
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 19446273e4a7..1dee0aa4f40c 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -81,7 +81,7 @@
 		regulator-boot-on;
 	};
 
-	lan9220@20000000 {
+	ethernet@20000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x20000000 0x10000>;
 		phy-mode = "mii";
@@ -96,7 +96,7 @@
 };
 
 &pfc {
-	uart1_pins: uart@e1030000 {
+	uart1_pins: serial@e1030000 {
 		renesas,groups = "uart1_ctrl", "uart1_data";
 		renesas,function = "uart1";
 	};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 1d483c1c8b48..a5863acc5fff 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -16,6 +16,7 @@
 #include "exynos3250.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Samsung Monk board";
@@ -432,7 +433,7 @@
 };
 
 &rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 0b9906880c0c..031853b75528 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -16,6 +16,7 @@
 #include "exynos3250.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Samsung Rinato board";
@@ -567,6 +568,10 @@
 	status = "okay";
 };
 
+&jpeg {
+	status = "okay";
+};
+
 &mshc_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -605,7 +610,7 @@
 };
 
 &rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index e3bfb11c6ef8..d7201333e3bc 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -189,7 +189,7 @@
 		};
 
 		rtc: rtc@10070000 {
-			compatible = "samsung,exynos3250-rtc";
+			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
 			interrupts = <0 73 0>, <0 74 0>;
 			interrupt-parent = <&pmu_system_controller>;
@@ -243,6 +243,30 @@
 			interrupts = <0 240 0>;
 		};
 
+		jpeg: codec@11830000 {
+			compatible = "samsung,exynos3250-jpeg";
+			reg = <0x11830000 0x1000>;
+			interrupts = <0 171 0>;
+			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
+			clock-names = "jpeg", "sclk";
+			power-domains = <&pd_cam>;
+			assigned-clocks = <&cmu CLK_MOUT_CAM_BLK>, <&cmu CLK_SCLK_JPEG>;
+			assigned-clock-rates = <0>, <150000000>;
+			assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>;
+			iommus = <&sysmmu_jpeg>;
+			status = "disabled";
+		};
+
+		sysmmu_jpeg: sysmmu@11A60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a60000 0x1000>;
+			interrupts = <0 156 0>, <0 161 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
+
 		fimd: fimd@11c00000 {
 			compatible = "samsung,exynos3250-fimd";
 			reg = <0x11c00000 0x30000>;
@@ -251,6 +275,7 @@
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			power-domains = <&pd_lcd0>;
+			iommus = <&sysmmu_fimd0>;
 			samsung,sysreg = <&sys_reg>;
 			status = "disabled";
 		};
@@ -270,6 +295,16 @@
 			status = "disabled";
 		};
 
+		sysmmu_fimd0: sysmmu@11E20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11e20000 0x1000>;
+			interrupts = <0 80 0>, <0 81 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
+		};
+
 		hsotg: hsotg@12480000 {
 			compatible = "snps,dwc2";
 			reg = <0x12480000 0x20000>;
@@ -364,9 +399,20 @@
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
 			power-domains = <&pd_mfc>;
+			iommus = <&sysmmu_mfc>;
 			status = "disabled";
 		};
 
+		sysmmu_mfc: sysmmu@13620000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13620000 0x1000>;
+			interrupts = <0 96 0>, <0 98 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
+			power-domains = <&pd_mfc>;
+			#iommu-cells = <0>;
+		};
+
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e20cdc24c3bb..f716e2b7d0b9 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -78,7 +78,6 @@
 
 	mipi_phy: video-phy@10020710 {
 		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10020710 8>;
 		#phy-cells = <1>;
 		syscon = <&pmu_system_controller>;
 	};
@@ -190,6 +189,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc0>;
 			status = "disabled";
 		};
 
@@ -201,6 +201,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc1>;
 			status = "disabled";
 		};
 
@@ -212,6 +213,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc2>;
 			status = "disabled";
 		};
 
@@ -223,6 +225,7 @@
 			clock-names = "fimc", "sclk_fimc";
 			power-domains = <&pd_cam>;
 			samsung,sysreg = <&sys_reg>;
+			iommus = <&sysmmu_fimc3>;
 			status = "disabled";
 		};
 
@@ -257,7 +260,7 @@
 		};
 	};
 
-	watchdog@10060000 {
+	watchdog: watchdog@10060000 {
 		compatible = "samsung,s3c2410-wdt";
 		reg = <0x10060000 0x100>;
 		interrupts = <0 43 0>;
@@ -266,7 +269,7 @@
 		status = "disabled";
 	};
 
-	rtc@10070000 {
+	rtc: rtc@10070000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupt-parent = <&pmu_system_controller>;
@@ -276,7 +279,7 @@
 		status = "disabled";
 	};
 
-	keypad@100A0000 {
+	keypad: keypad@100A0000 {
 		compatible = "samsung,s5pv210-keypad";
 		reg = <0x100A0000 0x100>;
 		interrupts = <0 109 0>;
@@ -285,7 +288,7 @@
 		status = "disabled";
 	};
 
-	sdhci@12510000 {
+	sdhci_0: sdhci@12510000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12510000 0x100>;
 		interrupts = <0 73 0>;
@@ -294,7 +297,7 @@
 		status = "disabled";
 	};
 
-	sdhci@12520000 {
+	sdhci_1: sdhci@12520000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12520000 0x100>;
 		interrupts = <0 74 0>;
@@ -303,7 +306,7 @@
 		status = "disabled";
 	};
 
-	sdhci@12530000 {
+	sdhci_2: sdhci@12530000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12530000 0x100>;
 		interrupts = <0 75 0>;
@@ -312,7 +315,7 @@
 		status = "disabled";
 	};
 
-	sdhci@12540000 {
+	sdhci_3: sdhci@12540000 {
 		compatible = "samsung,exynos4210-sdhci";
 		reg = <0x12540000 0x100>;
 		interrupts = <0 76 0>;
@@ -331,7 +334,7 @@
 		status = "disabled";
 	};
 
-	hsotg@12480000 {
+	hsotg: hsotg@12480000 {
 		compatible = "samsung,s3c6400-hsotg";
 		reg = <0x12480000 0x20000>;
 		interrupts = <0 71 0>;
@@ -342,7 +345,7 @@
 		status = "disabled";
 	};
 
-	ehci@12580000 {
+	ehci: ehci@12580000 {
 		compatible = "samsung,exynos4210-ehci";
 		reg = <0x12580000 0x100>;
 		interrupts = <0 70 0>;
@@ -368,7 +371,7 @@
 		};
 	};
 
-	ohci@12590000 {
+	ohci: ohci@12590000 {
 		compatible = "samsung,exynos4210-ohci";
 		reg = <0x12590000 0x100>;
 		interrupts = <0 70 0>;
@@ -417,6 +420,8 @@
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
 		clock-names = "mfc", "sclk_mfc";
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 		status = "disabled";
 	};
 
@@ -621,7 +626,7 @@
 		status = "disabled";
 	};
 
-	pwm@139D0000 {
+	pwm: pwm@139D0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x139D0000 0x1000>;
 		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
@@ -681,6 +686,7 @@
 		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
 		clock-names = "sclk_fimd", "fimd";
 		power-domains = <&pd_lcd0>;
+		iommus = <&sysmmu_fimd0>;
 		samsung,sysreg = <&sys_reg>;
 		status = "disabled";
 	};
@@ -689,6 +695,15 @@
 		#include "exynos4412-tmu-sensor-conf.dtsi"
 	};
 
+	jpeg_codec: jpeg-codec@11840000 {
+		compatible = "samsung,exynos4210-jpeg";
+		reg = <0x11840000 0x1000>;
+		interrupts = <0 88 0>;
+		clocks = <&clock CLK_JPEG>;
+		clock-names = "jpeg";
+		power-domains = <&pd_cam>;
+	};
+
 	hdmi: hdmi@12D00000 {
 		compatible = "samsung,exynos4210-hdmi";
 		reg = <0x12D00000 0x70000>;
@@ -709,6 +724,7 @@
 		interrupts = <0 91 0>;
 		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
 		power-domains = <&pd_tv>;
+		iommus = <&sysmmu_tv>;
 		status = "disabled";
 	};
 
@@ -819,4 +835,114 @@
 		clock-names = "ppmu";
 		status = "disabled";
 	};
+
+	sysmmu_mfc_l: sysmmu@13620000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13620000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		power-domains = <&pd_mfc>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu@13630000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13630000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		power-domains = <&pd_mfc>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu@12E20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12E20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+		power-domains = <&pd_tv>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc0: sysmmu@11A20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc1: sysmmu@11A30000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A30000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 3>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc2: sysmmu@11A40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc3: sysmmu@11A50000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A50000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg: sysmmu@11A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		power-domains = <&pd_cam>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_rotator: sysmmu@12A30000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12A30000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd0: sysmmu@11E20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11E20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index b81146141402..e0abfc3324d1 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -50,209 +50,6 @@
 		};
 	};
 
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	tmu@100C0000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	sdhci@12510000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
-	};
-
-	g2d@12800000 {
-		status = "okay";
-	};
-
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	i2c@13860000 {
-		status = "okay";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-
-		max8997_pmic@66 {
-			compatible = "maxim,max8997-pmic";
-			reg = <0x66>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <4 0>, <3 0>;
-
-			max8997,pmic-buck1-dvs-voltage = <1350000>;
-			max8997,pmic-buck2-dvs-voltage = <1100000>;
-			max8997,pmic-buck5-dvs-voltage = <1200000>;
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ABB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDD_ALIVE_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VMIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDD_RTC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD_AUD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt	= <3300000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "DVDD_SWB_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt	= <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD_PLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD_AUD_3V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt	= <3000000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "AVDD18_SWB_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt	= <1800000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDD_SWB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt	= <3300000>;
-					regulator-always-on;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "VDD_MIF_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt	= <1200000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					/*
-					* HACK: The real name is VDD_ARM_1.2V,
-					* but exynos-cpufreq does not support
-					* DT-based regulator lookup yet.
-					*/
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt	= <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VDD_INT_1.1V";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VDD_G3D_1.1V";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_M1M2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "VDD_LCD_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
@@ -314,12 +111,6 @@
 		};
 	};
 
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
 	display-timings {
 		native-mode = <&timing0>;
 		timing0: timing {
@@ -335,3 +126,212 @@
 		};
 	};
 };
+
+&fimd {
+	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&g2d {
+	status = "okay";
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 0>, <3 0>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>;
+		max8997,pmic-buck2-dvs-voltage = <1100000>;
+		max8997,pmic-buck5-dvs-voltage = <1200000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ABB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_ALIVE_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VMIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_RTC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_AUD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt	= <3300000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "DVDD_SWB_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt	= <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD_PLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_AUD_3V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt	= <3000000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "AVDD18_SWB_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt	= <1800000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDD_SWB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt	= <3300000>;
+				regulator-always-on;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_MIF_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				/*
+				* HACK: The real name is VDD_ARM_1.2V,
+				* but exynos-cpufreq does not support
+				* DT-based regulator lookup yet.
+				*/
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt	= <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_INT_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VDD_LCD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+	status = "okay";
+};
+
+&sdhci_0 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 86216fff1b4f..043b03caff8f 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -30,181 +30,181 @@
 		stdout-path = &serial_1;
 	};
 
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		status = "okay";
-	};
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <12000000>;
+		};
 
-	g2d@12800000 {
-		status = "okay";
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
 	};
+};
 
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
-	};
+&g2d {
+	status = "okay";
+};
 
-	serial@13800000 {
-		status = "okay";
-	};
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
 
-	serial@13810000 {
-		status = "okay";
+	eeprom@50 {
+		compatible = "samsung,24ad0xd1";
+		reg = <0x50>;
 	};
 
-	serial@13820000 {
-		status = "okay";
+	eeprom@52 {
+		compatible = "samsung,24ad0xd1";
+		reg = <0x52>;
 	};
+};
 
-	serial@13830000 {
-		status = "okay";
+&keypad {
+	samsung,keypad-num-rows = <2>;
+	samsung,keypad-num-columns = <8>;
+	linux,keypad-no-autorepeat;
+	linux,keypad-wakeup;
+	pinctrl-names = "default";
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	status = "okay";
+
+	key_1 {
+		keypad,row = <0>;
+		keypad,column = <3>;
+		linux,code = <2>;
 	};
 
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+	key_2 {
+		keypad,row = <0>;
+		keypad,column = <4>;
+		linux,code = <3>;
 	};
 
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <2>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-names = "default";
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		status = "okay";
+	key_3 {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <4>;
+	};
 
-		key_1 {
-			keypad,row = <0>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
+	key_4 {
+		keypad,row = <0>;
+		keypad,column = <6>;
+		linux,code = <5>;
+	};
 
-		key_2 {
-			keypad,row = <0>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
+	key_5 {
+		keypad,row = <0>;
+		keypad,column = <7>;
+		linux,code = <6>;
+	};
 
-		key_3 {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
+	key_a {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <30>;
+	};
 
-		key_4 {
-			keypad,row = <0>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
+	key_b {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <48>;
+	};
 
-		key_5 {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
+	key_c {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <46>;
+	};
 
-		key_a {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <30>;
-		};
+	key_d {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <32>;
+	};
 
-		key_b {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <48>;
-		};
+	key_e {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <18>;
+	};
+};
 
-		key_c {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+	status = "okay";
+};
 
-		key_d {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <32>;
-		};
+&pinctrl_1 {
+	keypad_rows: keypad-rows {
+		samsung,pins = "gpx2-0", "gpx2-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
+	};
 
-		key_e {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
+	keypad_cols: keypad-cols {
+		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
+};
 
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <100000>;
-		status = "okay";
-
-		eeprom@50 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x50>;
-		};
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	status = "okay";
+};
 
-		eeprom@52 {
-			compatible = "samsung,24ad0xd1";
-			reg = <0x52>;
-		};
-	};
+&serial_0 {
+	status = "okay";
+};
 
-	spi_2: spi@13940000 {
-		cs-gpios = <&gpc1 2 0>;
-		status = "okay";
+&serial_1 {
+	status = "okay";
+};
 
-		w25x80@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "w25x80";
-			reg = <0>;
-			spi-max-frequency = <1000000>;
+&serial_2 {
+	status = "okay";
+};
 
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
+&serial_3 {
+	status = "okay";
+};
 
-			partition@0 {
-				label = "U-Boot";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
+&spi_2 {
+	cs-gpios = <&gpc1 2 0>;
+	status = "okay";
 
-			partition@40000 {
-				label = "Kernel";
-				reg = <0x40000 0xc0000>;
-			};
+	w25x80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25x80";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
 		};
-	};
 
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <12000000>;
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0x40000>;
+			read-only;
 		};
 
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
+		partition@40000 {
+			label = "Kernel";
+			reg = <0x40000 0xc0000>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 32c5fd8f6269..98f3ce65cb9a 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -89,42 +89,6 @@
 		};
 	};
 
-	hsotg@12480000 {
-		vusb_d-supply = <&vusb_reg>;
-		vusb_a-supply = <&vusbdac_reg>;
-		dr_mode = "peripheral";
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -158,201 +122,6 @@
 		};
 	};
 
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		mms114-touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <4 2>;
-			x-size = <720>;
-			y-size = <1280>;
-			avdd-supply = <&tsp_reg>;
-			vdd-supply = <&tsp_reg>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max8997_pmic@66 {
-			compatible = "maxim,max8997-pmic";
-
-			reg = <0x66>;
-
-			max8997,pmic-buck1-uses-gpio-dvs;
-			max8997,pmic-buck2-uses-gpio-dvs;
-			max8997,pmic-buck5-uses-gpio-dvs;
-
-			max8997,pmic-ignore-gpiodvs-side-effect;
-			max8997,pmic-buck125-default-dvs-idx = <0>;
-
-			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
-						         <&gpx0 6 0>,
-							 <&gpl0 0 0>;
-
-			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-							 <1250000>, <1200000>,
-							 <1150000>, <1100000>,
-							 <1000000>, <950000>;
-
-			max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
-							 <950000>,  <900000>,
-							 <1100000>, <1000000>,
-							 <950000>,  <900000>;
-
-			max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			regulators {
-				valive_reg: LDO2 {
-				     regulator-name = "VALIVE_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				vusb_reg: LDO3 {
-				     regulator-name = "VUSB_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				};
-
-				vmipi_reg: LDO4 {
-				     regulator-name = "VMIPI_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vpda_reg: LDO6 {
-				     regulator-name = "VCC_1.8V_PDA";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				     regulator-always-on;
-				};
-
-				vcam_reg: LDO7 {
-				     regulator-name = "CAM_ISP_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vusbdac_reg: LDO8 {
-				     regulator-name = "VUSB/VDAC_3.3V_C210";
-				     regulator-min-microvolt = <3300000>;
-				     regulator-max-microvolt = <3300000>;
-				};
-
-				vccpda_reg: LDO9 {
-				     regulator-name = "VCC_2.8V_PDA";
-				     regulator-min-microvolt = <2800000>;
-				     regulator-max-microvolt = <2800000>;
-				     regulator-always-on;
-				};
-
-				vpll_reg: LDO10 {
-				     regulator-name = "VPLL_1.1V_C210";
-				     regulator-min-microvolt = <1100000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				vtcam_reg: LDO12 {
-				     regulator-name = "VT_CAM_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vcclcd_reg: LDO13 {
-				     regulator-name = "VCC_3.3V_LCD";
-				     regulator-min-microvolt = <3300000>;
-				     regulator-max-microvolt = <3300000>;
-				};
-
-				vlcd_reg: LDO15 {
-				     regulator-name = "VLCD_2.2V";
-				     regulator-min-microvolt = <2200000>;
-				     regulator-max-microvolt = <2200000>;
-				};
-
-				camsensor_reg: LDO16 {
-				     regulator-name = "CAM_SENSOR_IO_1.8V";
-				     regulator-min-microvolt = <1800000>;
-				     regulator-max-microvolt = <1800000>;
-				};
-
-				vddq_reg: LDO21 {
-				     regulator-name = "VDDQ_M1M2_1.2V";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				     regulator-always-on;
-				};
-
-				varm_breg: BUCK1 {
-				     /*
-				      * HACK: The real name is VARM_1.2V_C210,
-				      * but exynos-cpufreq does not support
-				      * DT-based regulator lookup yet.
-				      */
-				     regulator-name = "vdd_arm";
-				     regulator-min-microvolt = <900000>;
-				     regulator-max-microvolt = <1350000>;
-				     regulator-always-on;
-				};
-
-				vint_breg: BUCK2 {
-				     regulator-name = "VINT_1.1V_C210";
-				     regulator-min-microvolt = <900000>;
-				     regulator-max-microvolt = <1100000>;
-				     regulator-always-on;
-				};
-
-				camisp_breg: BUCK4 {
-				     regulator-name = "CAM_ISP_CORE_1.2V";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				};
-
-				vmem_breg: BUCK5 {
-				     regulator-name = "VMEM_1.2V_C210";
-				     regulator-min-microvolt = <1200000>;
-				     regulator-max-microvolt = <1200000>;
-				     regulator-always-on;
-				};
-
-				vccsub_breg: BUCK7 {
-				     regulator-name = "VCC_SUB_2.0V";
-				     regulator-min-microvolt = <2000000>;
-				     regulator-max-microvolt = <2000000>;
-				     regulator-always-on;
-				};
-
-				safe1_sreg: ESAFEOUT1 {
-				     regulator-name = "SAFEOUT1";
-				     regulator-always-on;
-				};
-
-				safe2_sreg: ESAFEOUT2 {
-				     regulator-name = "SAFEOUT2";
-				     regulator-boot-on;
-				};
-			};
-		};
-	};
-
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -365,71 +134,6 @@
 		};
 	};
 
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&vusb_reg>;
-		vddio-supply = <&vmipi_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			reg = <0>;
-			compatible = "samsung,s6e8aa0";
-			vdd3-supply = <&vcclcd_reg>;
-			vci-supply = <&vlcd_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <57153600>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
-
-	tmu@100C0000 {
-		status = "okay";
-	};
-
 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			cooling-maps {
@@ -483,3 +187,299 @@
 		};
 	};
 };
+
+&dsi_0 {
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <500000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		reg = <0>;
+		compatible = "samsung,s6e8aa0";
+		vdd3-supply = <&vcclcd_reg>;
+		vci-supply = <&vlcd_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mms114-touchscreen@48 {
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 2>;
+		x-size = <720>;
+		y-size = <1280>;
+		avdd-supply = <&tsp_reg>;
+		vdd-supply = <&tsp_reg>;
+	};
+};
+
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+
+		reg = <0x66>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+						 <&gpx0 6 0>,
+						 <&gpl0 0 0>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		regulators {
+			valive_reg: LDO2 {
+			     regulator-name = "VALIVE_1.1V_C210";
+			     regulator-min-microvolt = <1100000>;
+			     regulator-max-microvolt = <1100000>;
+			     regulator-always-on;
+			};
+
+			vusb_reg: LDO3 {
+			     regulator-name = "VUSB_1.1V_C210";
+			     regulator-min-microvolt = <1100000>;
+			     regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+			     regulator-name = "VMIPI_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vpda_reg: LDO6 {
+			     regulator-name = "VCC_1.8V_PDA";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			     regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+			     regulator-name = "CAM_ISP_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+			     regulator-name = "VUSB/VDAC_3.3V_C210";
+			     regulator-min-microvolt = <3300000>;
+			     regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+			     regulator-name = "VCC_2.8V_PDA";
+			     regulator-min-microvolt = <2800000>;
+			     regulator-max-microvolt = <2800000>;
+			     regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+			     regulator-name = "VPLL_1.1V_C210";
+			     regulator-min-microvolt = <1100000>;
+			     regulator-max-microvolt = <1100000>;
+			     regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+			     regulator-name = "VT_CAM_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+			     regulator-name = "VCC_3.3V_LCD";
+			     regulator-min-microvolt = <3300000>;
+			     regulator-max-microvolt = <3300000>;
+			};
+
+			vlcd_reg: LDO15 {
+			     regulator-name = "VLCD_2.2V";
+			     regulator-min-microvolt = <2200000>;
+			     regulator-max-microvolt = <2200000>;
+			};
+
+			camsensor_reg: LDO16 {
+			     regulator-name = "CAM_SENSOR_IO_1.8V";
+			     regulator-min-microvolt = <1800000>;
+			     regulator-max-microvolt = <1800000>;
+			};
+
+			vddq_reg: LDO21 {
+			     regulator-name = "VDDQ_M1M2_1.2V";
+			     regulator-min-microvolt = <1200000>;
+			     regulator-max-microvolt = <1200000>;
+			     regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+			     /*
+			      * HACK: The real name is VARM_1.2V_C210,
+			      * but exynos-cpufreq does not support
+			      * DT-based regulator lookup yet.
+			      */
+			     regulator-name = "vdd_arm";
+			     regulator-min-microvolt = <900000>;
+			     regulator-max-microvolt = <1350000>;
+			     regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+			     regulator-name = "VINT_1.1V_C210";
+			     regulator-min-microvolt = <900000>;
+			     regulator-max-microvolt = <1100000>;
+			     regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+			     regulator-name = "CAM_ISP_CORE_1.2V";
+			     regulator-min-microvolt = <1200000>;
+			     regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+			     regulator-name = "VMEM_1.2V_C210";
+			     regulator-min-microvolt = <1200000>;
+			     regulator-max-microvolt = <1200000>;
+			     regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+			     regulator-name = "VCC_SUB_2.0V";
+			     regulator-min-microvolt = <2000000>;
+			     regulator-max-microvolt = <2000000>;
+			     regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+			     regulator-name = "SAFEOUT1";
+			     regulator-always-on;
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+			     regulator-name = "SAFEOUT2";
+			     regulator-boot-on;
+			};
+		};
+	};
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index be89f83f70e7..10d3c173396e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -52,17 +52,7 @@
 		};
 	};
 
-	pmu_system_controller: system-controller@10020000 {
-		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-				"clkout4", "clkout8", "clkout9";
-		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-			<&clock CLK_XUSBXTI>;
-		#clock-cells = <1>;
-	};
-
-	sysram@02020000 {
+	sysram: sysram@02020000 {
 		compatible = "mmio-sram";
 		reg = <0x02020000 0x20000>;
 		#address-cells = <1>;
@@ -95,19 +85,7 @@
 		arm,data-latency = <2 2 1>;
 	};
 
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
-	};
-
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <16>;
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
-	};
-
-	mct@10050000 {
+	mct: mct@10050000 {
 		compatible = "samsung,exynos4210-mct";
 		reg = <0x10050000 0x800>;
 		interrupt-parent = <&mct_map>;
@@ -189,12 +167,13 @@
 		};
 	};
 
-	g2d@12800000 {
+	g2d: g2d@12800000 {
 		compatible = "samsung,s5pv210-g2d";
 		reg = <0x12800000 0x1000>;
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		iommus = <&sysmmu_g2d>;
 		status = "disabled";
 	};
 
@@ -244,4 +223,47 @@
 		clock-names = "ppmu";
 		status = "disabled";
 	};
+
+	sysmmu_g2d: sysmmu@12A20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12A20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 7>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		power-domains = <&pd_lcd0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1: sysmmu@12220000 {
+		compatible = "samsung,exynos-sysmmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x12220000 0x1000>;
+		interrupts = <5 3>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+		power-domains = <&pd_lcd1>;
+		#iommu-cells = <0>;
+	};
+};
+
+&gic {
+	cpu-offset = <0x8000>;
+};
+
+&combiner {
+	samsung,combiner-nr = <16>;
+	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+};
+
+&pmu_system_controller {
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+	#clock-cells = <1>;
 };
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
index 5be03288f1ee..d9c8efeef208 100644
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -41,12 +41,12 @@
 			reg = <0xA01>;
 		};
 	};
+};
 
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <18>;
-	};
+&combiner {
+	samsung,combiner-nr = <18>;
+};
 
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x8000>;
-	};
+&gic {
+	cpu-offset = <0x8000>;
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index d6b49e5b32e9..ca7d168d1dd6 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -38,16 +38,6 @@
 		};
 	};
 
-	i2s0: i2s@03830000 {
-		pinctrl-0 = <&i2s0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
-			 <&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-	};
-
 	sound: sound {
 		compatible = "simple-audio-card";
 		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
@@ -83,427 +73,437 @@
 		reset-gpios = <&gpk1 2 1>;
 	};
 
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo20_reg &buck8_reg>;
-		mmc-pwrseq = <&emmc_pwrseq>;
-		status = "okay";
-
-		num-slots = <1>;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-	};
-
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
-		clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-		clock-names = "rtc", "rtc_src";
-	};
-
-	g2d@10800000 {
-		status = "okay";
-	};
-
 	camera {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <>;
+	};
 
-		fimc_0: fimc@11800000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
 		};
 
-		fimc_2: fimc@11820000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
 		};
+	};
 
-		fimc_3: fimc@11830000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>;
+			       };
+		       };
 		};
 	};
+};
 
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo4_reg &ldo21_reg>;
-		cd-gpios = <&gpk2 2 0>;
-		cd-inverted;
-		status = "okay";
-	};
+/* RSTN signal for eMMC */
+&sd1_cd {
+	samsung,pin-pud = <0>;
+	samsung,pin-drv = <0>;
+};
 
-	serial@13800000 {
-		status = "okay";
+&pinctrl_1 {
+	gpio_power_key: power_key {
+		samsung,pins = "gpx1-3";
+		samsung,pin-pud = <0>;
 	};
 
-	serial@13810000 {
-		status = "okay";
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
 
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
+	hdmi_hpd: hdmi-hpd {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <1>;
 	};
+};
 
-	i2c@13860000 {
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <400000>;
-		status = "okay";
+&ehci {
+	status = "okay";
+};
 
-		usb3503: usb3503@08 {
-			compatible = "smsc,usb3503";
-			reg = <0x08>;
+&exynos_usbphy {
+	status = "okay";
+};
 
-			intn-gpios = <&gpx3 0 0>;
-			connect-gpios = <&gpx3 4 0>;
-			reset-gpios = <&gpx3 5 0>;
-			initial-mode = <1>;
-		};
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
 
-		max77686: pmic@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&max77686_irq>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			<&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
 
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M1_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			<&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
 
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDQ_EXT_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			<&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
 
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_MMC2_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+&g2d {
+	status = "okay";
+};
 
-				ldo5_reg: LDO5 {
-					regulator-name = "VDDQ_MMC1_3_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+&hdmi {
+	hpd-gpio = <&gpx3 7 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
 
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+};
 
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
+&i2c_0 {
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	status = "okay";
+
+	usb3503: usb3503@08 {
+		compatible = "smsc,usb3503";
+		reg = <0x08>;
+
+		intn-gpios = <&gpx3 0 0>;
+		connect-gpios = <&gpx3 4 0>;
+		reset-gpios = <&gpx3 5 0>;
+		initial-mode = <1>;
+	};
 
-				ldo8_reg: ldo@8 {
-					regulator-compatible = "LDO8";
-					regulator-name = "VDD10_HDMI_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
+	max77686: pmic@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
 
-				ldo10_reg: ldo@10 {
-					regulator-compatible = "LDO10";
-					regulator-name = "VDDQ_MIPIHSI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M1_2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
 
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDQ_EXT_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
 
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_USB_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_MMC2_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDQ_C2C_W_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo5_reg: LDO5 {
+				regulator-name = "VDDQ_MMC1_3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB0_2_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
 
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_HSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
 
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo8_reg: ldo@8 {
+				regulator-compatible = "LDO8";
+				regulator-name = "VDD10_HDMI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
 
-				ldo20_reg: LDO20 {
-					regulator-name = "LDO20_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-				};
+			ldo10_reg: ldo@10 {
+				regulator-compatible = "LDO10";
+				regulator-name = "VDDQ_MIPIHSI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
 
-				ldo21_reg: LDO21 {
-					regulator-name = "LDO21_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
 
-				ldo25_reg: LDO25 {
-					regulator-name = "VDDQ_LCD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_USB_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDQ_C2C_W_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB0_2_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_HSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-microvolt-offset = <50000>;
-				};
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck5_reg: BUCK5 {
-					regulator-name = "VDDQ_CKEM1_2_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo20_reg: LDO20 {
+				regulator-name = "LDO20_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
 
-				buck6_reg: BUCK6 {
-					regulator-name = "BUCK6_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo21_reg: LDO21 {
+				regulator-name = "LDO21_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck7_reg: BUCK7 {
-					regulator-name = "BUCK7_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
+			ldo25_reg: LDO25 {
+				regulator-name = "VDDQ_LCD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-				buck8_reg: BUCK8 {
-					regulator-name = "BUCK8_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
 			};
-		};
-	};
 
-	i2c@13870000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "okay";
-		max98090: max98090@10 {
-			compatible = "maxim,max98090";
-			reg = <0x10>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <0 0>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
-			clock-names = "mclk";
-			#sound-dai-cells = <0>;
-		};
-	};
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-	hsotg@12480000 {
-		dr_mode = "peripheral";
-		status = "okay";
-		vusb_d-supply = <&ldo15_reg>;
-		vusb_a-supply = <&ldo12_reg>;
-	};
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-microvolt-offset = <50000>;
+			};
 
-	ehci: ehci@12580000 {
-		status = "okay";
-	};
+			buck5_reg: BUCK5 {
+				regulator-name = "VDDQ_CKEM1_2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-	tmu@100C0000 {
-		vtmu-supply = <&ldo10_reg>;
-		status = "okay";
-	};
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 7 7>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 13 13>;
-			       };
-		       };
+			buck7_reg: BUCK7 {
+				regulator-name = "BUCK7_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "BUCK8_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
 		};
 	};
+};
 
-	mixer: mixer@12C10000 {
-		status = "okay";
+&i2c_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <0 0>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
 	};
+};
 
-	hdmi@12D00000 {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd>;
-		vdd-supply = <&ldo8_reg>;
-		vdd_osc-supply = <&ldo10_reg>;
-		vdd_pll-supply = <&ldo8_reg>;
-		ddc = <&hdmi_ddc>;
-		status = "okay";
-	};
+&i2c_2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
 
-	hdmi_ddc: i2c@13880000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-	};
+&i2c_8 {
+	status = "okay";
+};
 
-	i2c@138E0000 {
-		status = "okay";
-	};
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+		 <&clock_audss EXYNOS_SCLK_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <0>;
-	samsung,pin-drv = <0>;
+&mixer {
+	status = "okay";
 };
 
-&pinctrl_1 {
-	gpio_power_key: power_key {
-		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
-	};
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo20_reg &buck8_reg>;
+	mmc-pwrseq = <&emmc_pwrseq>;
+	status = "okay";
+
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
 
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
 
-	hdmi_hpd: hdmi-hpd {
-		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <1>;
-	};
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo4_reg &ldo21_reg>;
+	cd-gpios = <&gpk2 2 0>;
+	cd-inverted;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index cb1cfe7239c4..679ac103ebf6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -38,14 +38,6 @@
 		};
 	};
 
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
 	gpio_keys {
 		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
 
@@ -83,3 +75,11 @@
 		samsung,pin-pud = <0>;
 	};
 };
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index bd8b73077d41..84c76310b312 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -50,485 +50,485 @@
 		};
 	};
 
-	watchdog@10060000 {
-		status = "okay";
-	};
-
-	rtc@10070000 {
-		status = "okay";
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing {
+			clock-frequency = <47500000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <64>;
+			hback-porch = <16>;
+			hsync-len = <48>;
+			vback-porch = <64>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+		};
 	};
 
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
 		};
 
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
 		};
 	};
+};
 
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <3>;
-		samsung,keypad-num-columns = <2>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		key_home {
-			keypad,row = <0>;
-			keypad,column = <0>;
-			linux,code = <KEY_HOME>;
-		};
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
 
-		key_down {
-			keypad,row = <0>;
-			keypad,column = <1>;
-			linux,code = <KEY_DOWN>;
-		};
+&g2d {
+	status = "okay";
+};
 
-		key_up {
-			keypad,row = <1>;
-			keypad,column = <0>;
-			linux,code = <KEY_UP>;
-		};
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <20000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767_pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
+						 <&gpx2 4 0>,
+						 <&gpx2 5 0>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
+						<&gpm3 6 0>,
+						<&gpm3 7 0>;
+
+		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1100000>, <1100000>,
+						 <1100000>, <1100000>;
+
+		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
 
-		key_menu {
-			keypad,row = <1>;
-			keypad,column = <1>;
-			linux,code = <KEY_MENU>;
-		};
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
 
-		key_back {
-			keypad,row = <2>;
-			keypad,column = <0>;
-			linux,code = <KEY_BACK>;
-		};
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD18_2M";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "DVDD25";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
 
-		key_enter {
-			keypad,row = <2>;
-			keypad,column = <1>;
-			linux,code = <KEY_ENTER>;
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt	= <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt	= <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt	= <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_m12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd12_5m";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vddf28_emmc";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt	= <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
 		};
 	};
+};
 
-	g2d@10800000 {
-		status = "okay";
+&keypad {
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <2>;
+	linux,keypad-no-autorepeat;
+	linux,keypad-wakeup;
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	key_home {
+		keypad,row = <0>;
+		keypad,column = <0>;
+		linux,code = <KEY_HOME>;
 	};
 
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		vmmc-supply = <&mmc_reg>;
-		status = "okay";
+	key_down {
+		keypad,row = <0>;
+		keypad,column = <1>;
+		linux,code = <KEY_DOWN>;
 	};
 
-	mmc@12550000 {
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		num-slots = <1>;
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
+	key_up {
+		keypad,row = <1>;
+		keypad,column = <0>;
+		linux,code = <KEY_UP>;
 	};
 
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
+	key_menu {
+		keypad,row = <1>;
+		keypad,column = <1>;
+		linux,code = <KEY_MENU>;
 	};
 
-	fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-		pinctrl-names = "default";
-		status = "okay";
+	key_back {
+		keypad,row = <2>;
+		keypad,column = <0>;
+		linux,code = <KEY_BACK>;
 	};
 
-	display-timings {
-		native-mode = <&timing0>;
-		timing0: timing {
-			clock-frequency = <47500000>;
-			hactive = <1024>;
-			vactive = <600>;
-			hfront-porch = <64>;
-			hback-porch = <16>;
-			hsync-len = <48>;
-			vback-porch = <64>;
-			vfront-porch = <16>;
-			vsync-len = <3>;
-		};
+	key_enter {
+		keypad,row = <2>;
+		keypad,column = <1>;
+		linux,code = <KEY_ENTER>;
 	};
+};
 
-	serial@13800000 {
-		status = "okay";
-	};
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+	status = "okay";
+};
 
-	serial@13810000 {
-		status = "okay";
-	};
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	num-slots = <1>;
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
 
-	serial@13820000 {
-		status = "okay";
+&pinctrl_1 {
+	keypad_rows: keypad-rows {
+		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
 	};
 
-	serial@13830000 {
-		status = "okay";
+	keypad_cols: keypad-cols {
+		samsung,pins = "gpx1-0", "gpx1-1";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
+};
 
-	i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <20000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		s5m8767_pmic@66 {
-			compatible = "samsung,s5m8767-pmic";
-			reg = <0x66>;
-
-			s5m8767,pmic-buck-default-dvs-idx = <3>;
-
-			s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
-							 <&gpx2 4 0>,
-							 <&gpx2 5 0>;
-
-			s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
-							<&gpm3 6 0>,
-							<&gpm3 7 0>;
-
-			s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-							 <1100000>, <1100000>,
-							 <1100000>, <1100000>,
-							 <1100000>, <1100000>;
-
-			s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>,
-							 <1200000>, <1200000>;
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "VDD_ALIVE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "VDDQ_M12";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VDDIOAP_18";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VDDQ_PRE";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VDD18_2M";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "VDD10_MPLL";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VDD10_XPLL";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VDD10_MIPI";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VDD33_LCD";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VDD18_MIPI";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "VDD18_ABB1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "VDD33_UOTG";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VDDIOPERI_18";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "VDD18_ABB02";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "VDD10_USH";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "VDD18_HSIC";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VDDIOAP_MMC012_28";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "VDDIOPERI_28";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "DVDD25";
-					regulator-min-microvolt = <2500000>;
-					regulator-max-microvolt = <2500000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "VDD28_CAM";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "VDD28_AF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo22_reg: LDO22 {
-					regulator-name = "VDDA28_2M";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "VDD28_TF";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "VDD33_A31";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo25_reg: LDO25 {
-					regulator-name = "VDD18_CAM";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "VDD18_A31";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo27_reg: LDO27 {
-					regulator-name = "GPS_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				ldo28_reg: LDO28 {
-					regulator-name = "DVDD12";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt	= <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <900000>;
-					regulator-max-microvolt	= <1200000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_m12";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd12_5m";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vddf28_emmc";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt	= <3000000>;
-					regulator-always-on;
-					regulator-boot-on;
-					op_mode = <1>; /* Normal Mode */
-				};
-			};
-		};
-	};
+&rtc {
+	status = "okay";
+};
 
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&mmc_reg>;
+	status = "okay";
+};
 
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index b9256afbcc68..c2421df1fa43 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -28,135 +28,135 @@
 		stdout-path = &serial_1;
 	};
 
-	g2d@10800000 {
-		status = "okay";
-	};
-
-	pinctrl@11000000 {
-		keypad_rows: keypad-rows {
-			samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
 		};
 
-		keypad_cols: keypad-cols {
-			samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
-				       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
 		};
 	};
+};
 
-	keypad@100A0000 {
-		samsung,keypad-num-rows = <3>;
-		samsung,keypad-num-columns = <8>;
-		linux,keypad-no-autorepeat;
-		linux,keypad-wakeup;
-		pinctrl-0 = <&keypad_rows &keypad_cols>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		key_1 {
-			keypad,row = <1>;
-			keypad,column = <3>;
-			linux,code = <2>;
-		};
-
-		key_2 {
-			keypad,row = <1>;
-			keypad,column = <4>;
-			linux,code = <3>;
-		};
-
-		key_3 {
-			keypad,row = <1>;
-			keypad,column = <5>;
-			linux,code = <4>;
-		};
-
-		key_4 {
-			keypad,row = <1>;
-			keypad,column = <6>;
-			linux,code = <5>;
-		};
+&g2d {
+	status = "okay";
+};
 
-		key_5 {
-			keypad,row = <1>;
-			keypad,column = <7>;
-			linux,code = <6>;
-		};
+&keypad {
+	samsung,keypad-num-rows = <3>;
+	samsung,keypad-num-columns = <8>;
+	linux,keypad-no-autorepeat;
+	linux,keypad-wakeup;
+	pinctrl-0 = <&keypad_rows &keypad_cols>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	key_1 {
+		keypad,row = <1>;
+		keypad,column = <3>;
+		linux,code = <2>;
+	};
 
-		key_A {
-			keypad,row = <2>;
-			keypad,column = <6>;
-			linux,code = <30>;
-		};
+	key_2 {
+		keypad,row = <1>;
+		keypad,column = <4>;
+		linux,code = <3>;
+	};
 
-		key_B {
-			keypad,row = <2>;
-			keypad,column = <7>;
-			linux,code = <48>;
-		};
+	key_3 {
+		keypad,row = <1>;
+		keypad,column = <5>;
+		linux,code = <4>;
+	};
 
-		key_C {
-			keypad,row = <0>;
-			keypad,column = <5>;
-			linux,code = <46>;
-		};
+	key_4 {
+		keypad,row = <1>;
+		keypad,column = <6>;
+		linux,code = <5>;
+	};
 
-		key_D {
-			keypad,row = <2>;
-			keypad,column = <5>;
-			linux,code = <32>;
-		};
+	key_5 {
+		keypad,row = <1>;
+		keypad,column = <7>;
+		linux,code = <6>;
+	};
 
-		key_E {
-			keypad,row = <0>;
-			keypad,column = <7>;
-			linux,code = <18>;
-		};
+	key_A {
+		keypad,row = <2>;
+		keypad,column = <6>;
+		linux,code = <30>;
 	};
 
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
-		pinctrl-names = "default";
-		status = "okay";
+	key_B {
+		keypad,row = <2>;
+		keypad,column = <7>;
+		linux,code = <48>;
 	};
 
-	codec@13400000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-		status = "okay";
+	key_C {
+		keypad,row = <0>;
+		keypad,column = <5>;
+		linux,code = <46>;
 	};
 
-	serial@13800000 {
-		status = "okay";
+	key_D {
+		keypad,row = <2>;
+		keypad,column = <5>;
+		linux,code = <32>;
 	};
 
-	serial@13810000 {
-		status = "okay";
+	key_E {
+		keypad,row = <0>;
+		keypad,column = <7>;
+		linux,code = <18>;
 	};
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+	status = "okay";
+};
 
-	serial@13820000 {
-		status = "okay";
+&pinctrl_1 {
+	keypad_rows: keypad-rows {
+		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <3>;
+		samsung,pin-drv = <0>;
 	};
 
-	serial@13830000 {
-		status = "okay";
+	keypad_cols: keypad-cols {
+		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
+			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
+		samsung,pin-function = <3>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
 	};
+};
 
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <0>;
-		};
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
 
-		xusbxti {
-			compatible = "samsung,clock-xusbxti";
-			clock-frequency = <24000000>;
-		};
-	};
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index d46fd4c2aeaa..525684ca8dc0 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -56,33 +56,6 @@
 		};
 	};
 
-	rtc@10070000 {
-		status = "okay";
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -95,3 +68,30 @@
 		};
 	};
 };
+
+&rtc {
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 792394dd0f2a..afc199d78cb9 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -16,6 +16,7 @@
 #include "exynos4412.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77686.h>
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
@@ -130,411 +131,6 @@
 		};
 	};
 
-	adc: adc@126C0000 {
-		vdd-supply = <&ldo3_reg>;
-		status = "okay";
-	};
-
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		mms114-touchscreen@48 {
-			compatible = "melfas,mms114";
-			reg = <0x48>;
-			interrupt-parent = <&gpm2>;
-			interrupts = <3 2>;
-			x-size = <720>;
-			y-size = <1280>;
-			avdd-supply = <&ldo23_reg>;
-			vdd-supply = <&ldo24_reg>;
-		};
-	};
-
-	i2c_0: i2c@13860000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <400000>;
-		pinctrl-0 = <&i2c0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		s5c73m3@3c {
-			compatible = "samsung,s5c73m3";
-			reg = <0x3c>;
-			standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
-			xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
-			vdd-int-supply = <&buck9_reg>;
-			vddio-cis-supply = <&ldo9_reg>;
-			vdda-supply = <&ldo17_reg>;
-			vddio-host-supply = <&ldo18_reg>;
-			vdd-af-supply = <&cam_af_reg>;
-			vdd-reg-supply = <&cam_io_reg>;
-			clock-frequency = <24000000>;
-			/* CAM_A_CLKOUT */
-			clocks = <&camera 0>;
-			clock-names = "cis_extclk";
-			port {
-				s5c73m3_ep: endpoint {
-					remote-endpoint = <&csis0_ep>;
-					data-lanes = <1 2 3 4>;
-				};
-			};
-		};
-	};
-
-	i2c@138A0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c4_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		wm1811: wm1811@1a {
-			compatible = "wlf,wm1811";
-			reg = <0x1a>;
-			clocks = <&pmu_system_controller 0>;
-			clock-names = "MCLK1";
-			DCVDD-supply = <&ldo3_reg>;
-			DBVDD1-supply = <&ldo3_reg>;
-			wlf,ldo1ena = <&gpj0 4 0>;
-		};
-	};
-
-	i2c@138D0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c7_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		max77686_pmic@09 {
-			compatible = "maxim,max77686";
-			interrupt-parent = <&gpx0>;
-			interrupts = <7 0>;
-			reg = <0x09>;
-			#clock-cells = <1>;
-
-			voltage-regulators {
-				ldo1_reg: ldo1 {
-					regulator-compatible = "LDO1";
-					regulator-name = "VALIVE_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: ldo2 {
-					regulator-compatible = "LDO2";
-					regulator-name = "VM1M2_1.2V_AP";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo3_reg: ldo3 {
-					regulator-compatible = "LDO3";
-					regulator-name = "VCC_1.8V_AP";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: ldo4 {
-					regulator-compatible = "LDO4";
-					regulator-name = "VCC_2.8V_AP";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					regulator-compatible = "LDO5";
-					regulator-name = "VCC_1.8V_IO";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: ldo6 {
-					regulator-compatible = "LDO6";
-					regulator-name = "VMPLL_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo7_reg: ldo7 {
-					regulator-compatible = "LDO7";
-					regulator-name = "VPLL_1.0V_AP";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo8_reg: ldo8 {
-					regulator-compatible = "LDO8";
-					regulator-name = "VMIPI_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo9_reg: ldo9 {
-					regulator-compatible = "LDO9";
-					regulator-name = "CAM_ISP_MIPI_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo10_reg: ldo10 {
-					regulator-compatible = "LDO10";
-					regulator-name = "VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo11_reg: ldo11 {
-					regulator-compatible = "LDO11";
-					regulator-name = "VABB1_1.95V";
-					regulator-min-microvolt = <1950000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-always-on;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo12_reg: ldo12 {
-					regulator-compatible = "LDO12";
-					regulator-name = "VUOTG_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo13_reg: ldo13 {
-					regulator-compatible = "LDO13";
-					regulator-name = "NFC_AVDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo14_reg: ldo14 {
-					regulator-compatible = "LDO14";
-					regulator-name = "VABB2_1.95V";
-					regulator-min-microvolt = <1950000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-always-on;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				ldo15_reg: ldo15 {
-					regulator-compatible = "LDO15";
-					regulator-name = "VHSIC_1.0V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo16_reg: ldo16 {
-					regulator-compatible = "LDO16";
-					regulator-name = "VHSIC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				ldo17_reg: ldo17 {
-					regulator-compatible = "LDO17";
-					regulator-name = "CAM_SENSOR_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo18_reg: ldo18 {
-					regulator-compatible = "LDO18";
-					regulator-name = "CAM_ISP_SEN_IO_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo19_reg: ldo19 {
-					regulator-compatible = "LDO19";
-					regulator-name = "VT_CAM_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo20_reg: ldo20 {
-					regulator-compatible = "LDO20";
-					regulator-name = "VDDQ_PRE_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo21_reg: ldo21 {
-					regulator-compatible = "LDO21";
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
-				};
-
-				ldo22_reg: ldo22 {
-					regulator-compatible = "LDO22";
-					regulator-name = "VMEM_VDD_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-				};
-
-				ldo23_reg: ldo23 {
-					regulator-compatible = "LDO23";
-					regulator-name = "TSP_AVDD_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo24_reg: ldo24 {
-					regulator-compatible = "LDO24";
-					regulator-name = "TSP_VDD_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo25_reg: ldo25 {
-					regulator-compatible = "LDO25";
-					regulator-name = "LCD_VCC_3.3V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo26_reg: ldo26 {
-					regulator-compatible = "LDO26";
-					regulator-name = "MOTOR_VCC_3.0V";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: buck1 {
-					regulator-compatible = "BUCK1";
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				buck2_reg: buck2 {
-					regulator-compatible = "BUCK2";
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-state-mem {
-						regulator-on-in-suspend;
-					};
-				};
-
-				buck3_reg: buck3 {
-					regulator-compatible = "BUCK3";
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				buck4_reg: buck4 {
-					regulator-compatible = "BUCK4";
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-boot-on;
-					regulator-state-mem {
-						regulator-off-in-suspend;
-					};
-				};
-
-				buck5_reg: buck5 {
-					regulator-compatible = "BUCK5";
-					regulator-name = "VMEM_1.2V_AP";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck6_reg: buck6 {
-					regulator-compatible = "BUCK6";
-					regulator-name = "VCC_SUB_1.35V";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: buck7 {
-					regulator-compatible = "BUCK7";
-					regulator-name = "VCC_SUB_2.0V";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: buck8 {
-					regulator-compatible = "BUCK8";
-					regulator-name = "VMEM_VDDF_3.0V";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-				};
-
-				buck9_reg: buck9 {
-					regulator-compatible = "BUCK9";
-					regulator-name = "CAM_ISP_CORE_1.2V";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1200000>;
-					maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-				};
-			};
-		};
-	};
-
 	i2c_max77693: i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
@@ -597,54 +193,6 @@
 		};
 	};
 
-	mmc@12550000 {
-		num-slots = <1>;
-		broken-cd;
-		non-removable;
-		card-detect-delay = <200>;
-		vmmc-supply = <&ldo22_reg>;
-		clock-frequency = <400000000>;
-		samsung,dw-mshc-ciu-div = <0>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-		pinctrl-names = "default";
-		status = "okay";
-		bus-width = <8>;
-		cap-mmc-highspeed;
-	};
-
-	sdhci@12530000 {
-		bus-width = <4>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo21_reg>;
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
-	};
-
-	tmu@100C0000 {
-		vtmu-supply = <&ldo10_reg>;
-		status = "okay";
-	};
-
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
@@ -676,90 +224,6 @@
 		};
 	};
 
-	spi_1: spi@13930000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		cs-gpios = <&gpb 5 0>;
-		status = "okay";
-
-		s5c73m3_spi: s5c73m3 {
-			compatible = "samsung,s5c73m3";
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-			controller-data {
-				samsung,spi-feedback-delay = <2>;
-			};
-		};
-	};
-
-	pwm: pwm@139D0000 {
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-		samsung,pwm-outputs = <0>;
-		status = "okay";
-	};
-
-	dsi_0: dsi@11C80000 {
-		vddcore-supply = <&ldo8_reg>;
-		vddio-supply = <&ldo10_reg>;
-		samsung,pll-clock-frequency = <24000000>;
-		status = "okay";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@1 {
-				reg = <1>;
-
-				dsi_out: endpoint {
-					remote-endpoint = <&dsi_in>;
-					samsung,burst-clock-frequency = <500000000>;
-					samsung,esc-clock-frequency = <20000000>;
-				};
-			};
-		};
-
-		panel@0 {
-			compatible = "samsung,s6e8aa0";
-			reg = <0>;
-			vdd3-supply = <&lcd_vdd3_reg>;
-			vci-supply = <&ldo25_reg>;
-			reset-gpios = <&gpy4 5 0>;
-			power-on-delay= <50>;
-			reset-delay = <100>;
-			init-delay = <100>;
-			flip-horizontal;
-			flip-vertical;
-			panel-width-mm = <58>;
-			panel-height-mm = <103>;
-
-			display-timings {
-				timing-0 {
-					clock-frequency = <57153600>;
-					hactive = <720>;
-					vactive = <1280>;
-					hfront-porch = <5>;
-					hback-porch = <5>;
-					hsync-len = <5>;
-					vfront-porch = <13>;
-					vback-porch = <1>;
-					vsync-len = <2>;
-				};
-			};
-
-			port {
-				dsi_in: endpoint {
-					remote-endpoint = <&dsi_out>;
-				};
-			};
-		};
-	};
-
-	fimd@11c00000 {
-		status = "okay";
-	};
-
 	camera: camera {
 		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
 		pinctrl-names = "default";
@@ -769,124 +233,7 @@
 		assigned-clock-parents = <&clock CLK_XUSBXTI>,
 					 <&clock CLK_XUSBXTI>;
 
-		fimc_0: fimc@11800000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-		};
-
-		csis_0: csis@11880000 {
-			status = "okay";
-			vddcore-supply = <&ldo8_reg>;
-			vddio-supply = <&ldo10_reg>;
-			assigned-clocks = <&clock CLK_MOUT_CSIS0>,
-					<&clock CLK_SCLK_CSIS0>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-
-			/* Camera C (3) MIPI CSI-2 (CSIS0) */
-			port@3 {
-				reg = <3>;
-				csis0_ep: endpoint {
-					remote-endpoint = <&s5c73m3_ep>;
-					data-lanes = <1 2 3 4>;
-					samsung,csis-hs-settle = <12>;
-				};
-			};
-		};
-
-		csis_1: csis@11890000 {
-			status = "okay";
-			vddcore-supply = <&ldo8_reg>;
-			vddio-supply = <&ldo10_reg>;
-			assigned-clocks = <&clock CLK_MOUT_CSIS1>,
-					<&clock CLK_SCLK_CSIS1>;
-			assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-			assigned-clock-rates = <0>, <176000000>;
-
-			/* Camera D (4) MIPI CSI-2 (CSIS1) */
-			port@4 {
-				reg = <4>;
-				csis1_ep: endpoint {
-					remote-endpoint = <&is_s5k6a3_ep>;
-					data-lanes = <1>;
-					samsung,csis-hs-settle = <18>;
-					samsung,csis-wclk;
-				};
-			};
-		};
-
-		fimc_lite_0: fimc-lite@12390000 {
-			status = "okay";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			status = "okay";
-		};
 
-		fimc-is@12000000 {
-			pinctrl-0 = <&fimc_is_uart>;
-			pinctrl-names = "default";
-			status = "okay";
-
-			i2c1_isp: i2c-isp@12140000 {
-				pinctrl-0 = <&fimc_is_i2c1>;
-				pinctrl-names = "default";
-
-				s5k6a3@10 {
-					compatible = "samsung,s5k6a3";
-					reg = <0x10>;
-					svdda-supply = <&cam_io_reg>;
-					svddio-supply = <&ldo19_reg>;
-					afvdd-supply = <&ldo19_reg>;
-					clock-frequency = <24000000>;
-					/* CAM_B_CLKOUT */
-					clocks = <&camera 1>;
-					clock-names = "extclk";
-					samsung,camclk-out = <1>;
-					gpios = <&gpm1 6 0>;
-
-					port {
-						is_s5k6a3_ep: endpoint {
-							remote-endpoint = <&csis1_ep>;
-							data-lanes = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	i2s0: i2s@03830000 {
-		pinctrl-0 = <&i2s0_bus>;
-		pinctrl-names = "default";
-		status = "okay";
 	};
 
 	sound {
@@ -901,17 +248,6 @@
 			"SPK", "SPKOUTRP";
 	};
 
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo15_reg>;
-		vusb_a-supply = <&ldo12_reg>;
-		dr_mode = "peripheral";
-		status = "okay";
-	};
-
 	thermistor-ap@0 {
 		compatible = "ntc,ncp15wb473";
 		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
@@ -944,6 +280,619 @@
 	};
 };
 
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&csis_0 {
+	status = "okay";
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+			<&clock CLK_SCLK_CSIS0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+
+	/* Camera C (3) MIPI CSI-2 (CSIS0) */
+	port@3 {
+		reg = <3>;
+		csis0_ep: endpoint {
+			remote-endpoint = <&s5c73m3_ep>;
+			data-lanes = <1 2 3 4>;
+			samsung,csis-hs-settle = <12>;
+		};
+	};
+};
+
+&csis_1 {
+	status = "okay";
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+			<&clock CLK_SCLK_CSIS1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+
+	/* Camera D (4) MIPI CSI-2 (CSIS1) */
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&is_s5k6a3_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <18>;
+			samsung,csis-wclk;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <500000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "samsung,s6e8aa0";
+		reg = <0>;
+		vdd3-supply = <&lcd_vdd3_reg>;
+		vci-supply = <&ldo25_reg>;
+		reset-gpios = <&gpy4 5 0>;
+		power-on-delay= <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			<&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			<&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			<&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_is {
+	pinctrl-0 = <&fimc_is_uart>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	i2c1_isp: i2c-isp@12140000 {
+		pinctrl-0 = <&fimc_is_i2c1>;
+		pinctrl-names = "default";
+
+		s5k6a3@10 {
+			compatible = "samsung,s5k6a3";
+			reg = <0x10>;
+			svdda-supply = <&cam_io_reg>;
+			svddio-supply = <&ldo19_reg>;
+			afvdd-supply = <&ldo19_reg>;
+			clock-frequency = <24000000>;
+			/* CAM_B_CLKOUT */
+			clocks = <&camera 1>;
+			clock-names = "extclk";
+			samsung,camclk-out = <1>;
+			gpios = <&gpm1 6 0>;
+
+			port {
+				is_s5k6a3_ep: endpoint {
+					remote-endpoint = <&csis1_ep>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
+};
+
+&fimc_lite_0 {
+	status = "okay";
+};
+
+&fimc_lite_1 {
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5c73m3@3c {
+		compatible = "samsung,s5c73m3";
+		reg = <0x3c>;
+		standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
+		xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
+		vdd-int-supply = <&buck9_reg>;
+		vddio-cis-supply = <&ldo9_reg>;
+		vdda-supply = <&ldo17_reg>;
+		vddio-host-supply = <&ldo18_reg>;
+		vdd-af-supply = <&cam_af_reg>;
+		vdd-reg-supply = <&cam_io_reg>;
+		clock-frequency = <24000000>;
+		/* CAM_A_CLKOUT */
+		clocks = <&camera 0>;
+		clock-names = "cis_extclk";
+		port {
+			s5c73m3_ep: endpoint {
+				remote-endpoint = <&csis0_ep>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mms114-touchscreen@48 {
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 2>;
+		x-size = <720>;
+		y-size = <1280>;
+		avdd-supply = <&ldo23_reg>;
+		vdd-supply = <&ldo24_reg>;
+	};
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm1811: wm1811@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "MCLK1";
+		DCVDD-supply = <&ldo3_reg>;
+		DBVDD1-supply = <&ldo3_reg>;
+		wlf,ldo1ena = <&gpj0 4 0>;
+	};
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max77686: max77686_pmic@09 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 0>;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: ldo1 {
+				regulator-compatible = "LDO1";
+				regulator-name = "VALIVE_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-compatible = "LDO2";
+				regulator-name = "VM1M2_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-compatible = "LDO3";
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-compatible = "LDO4";
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-compatible = "LDO5";
+				regulator-name = "VCC_1.8V_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-compatible = "LDO6";
+				regulator-name = "VMPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-compatible = "LDO7";
+				regulator-name = "VPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-compatible = "LDO8";
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-compatible = "LDO9";
+				regulator-name = "CAM_ISP_MIPI_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-compatible = "LDO10";
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: ldo11 {
+				regulator-compatible = "LDO11";
+				regulator-name = "VABB1_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: ldo12 {
+				regulator-compatible = "LDO12";
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: ldo13 {
+				regulator-compatible = "LDO13";
+				regulator-name = "NFC_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: ldo14 {
+				regulator-compatible = "LDO14";
+				regulator-name = "VABB2_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: ldo15 {
+				regulator-compatible = "LDO15";
+				regulator-name = "VHSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo16_reg: ldo16 {
+				regulator-compatible = "LDO16";
+				regulator-name = "VHSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: ldo17 {
+				regulator-compatible = "LDO17";
+				regulator-name = "CAM_SENSOR_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: ldo18 {
+				regulator-compatible = "LDO18";
+				regulator-name = "CAM_ISP_SEN_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: ldo19 {
+				regulator-compatible = "LDO19";
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: ldo20 {
+				regulator-compatible = "LDO20";
+				regulator-name = "VDDQ_PRE_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: ldo21 {
+				regulator-compatible = "LDO21";
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo22_reg: ldo22 {
+				regulator-compatible = "LDO22";
+				regulator-name = "VMEM_VDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo23_reg: ldo23 {
+				regulator-compatible = "LDO23";
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo24_reg: ldo24 {
+				regulator-compatible = "LDO24";
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo25_reg: ldo25 {
+				regulator-compatible = "LDO25";
+				regulator-name = "LCD_VCC_3.3V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: ldo26 {
+				regulator-compatible = "LDO26";
+				regulator-name = "MOTOR_VCC_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: buck1 {
+				regulator-compatible = "BUCK1";
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: buck2 {
+				regulator-compatible = "BUCK2";
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck3_reg: buck3 {
+				regulator-compatible = "BUCK3";
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: buck4 {
+				regulator-compatible = "BUCK4";
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: buck5 {
+				regulator-compatible = "BUCK5";
+				regulator-name = "VMEM_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: buck6 {
+				regulator-compatible = "BUCK6";
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: buck7 {
+				regulator-compatible = "BUCK7";
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: buck8 {
+				regulator-compatible = "BUCK8";
+				regulator-name = "VMEM_VDDF_3.0V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			buck9_reg: buck9 {
+				regulator-compatible = "BUCK9";
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mshc_0 {
+	num-slots = <1>;
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo22_reg>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
 &pmu_system_controller {
 	assigned-clocks = <&pmu_system_controller 0>;
 	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
@@ -1304,3 +1253,63 @@
 		PIN_SLP(gpv4-0, INPUT, DOWN);
 	};
 };
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 0>;
+	cd-inverted;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo21_reg>;
+	status = "okay";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&spi_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_bus>;
+	cs-gpios = <&gpb 5 0>;
+	status = "okay";
+
+	s5c73m3_spi: s5c73m3 {
+		compatible = "samsung,s5c73m3";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		controller-data {
+			samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 68ad43b391ae..b78ada70bd05 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -54,19 +54,19 @@
 		};
 	};
 
-	combiner: interrupt-controller@10440000 {
-		samsung,combiner-nr = <20>;
-	};
-
 	pmu {
 		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
 	};
+};
 
-	gic: interrupt-controller@10490000 {
-		cpu-offset = <0x4000>;
-	};
+&pmu_system_controller {
+	compatible = "samsung,exynos4412-pmu", "syscon";
+};
 
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4412-pmu", "syscon";
-	};
+&combiner {
+	samsung,combiner-nr = <20>;
+};
+
+&gic {
+	cpu-offset = <0x4000>;
 };
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 5caea996e090..ad764842fff5 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -124,8 +124,8 @@
 
 		mipi_phy: video-phy@10020710 {
 			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10020710 8>;
 			#phy-cells = <1>;
+			syscon = <&pmu_system_controller>;
 		};
 
 		pd_cam: cam-power-domain@10024000 {
@@ -177,7 +177,7 @@
 		};
 
 		rtc: rtc@10070000 {
-			compatible = "samsung,exynos3250-rtc";
+			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
 			interrupts = <0 73 0>, <0 74 0>;
 			status = "disabled";
@@ -249,6 +249,7 @@
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			samsung,power-domain = <&pd_lcd0>;
+			iommus = <&sysmmu_fimd0>;
 			samsung,sysreg = <&sysreg_system_controller>;
 			status = "disabled";
 		};
@@ -268,6 +269,16 @@
 			status = "disabled";
 		};
 
+		sysmmu_fimd0: sysmmu@11E20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11e20000 0x1000>;
+			interrupts = <0 80 0>, <0 81 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
+		};
+
 		hsotg: hsotg@12480000 {
 			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index c141931378e7..bac25c672789 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -29,7 +29,7 @@
 	}
 
 / {
-	pinctrl@11400000 {
+	pinctrl_0: pinctrl@11400000 {
 		gpa0: gpa0 {
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -441,7 +441,7 @@
 		};
 	};
 
-	pinctrl@11000000 {
+	pinctrl_1: pinctrl@11000000 {
 		gpk0: gpk0 {
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -887,7 +887,7 @@
 		};
 	};
 
-	pinctrl@03860000 {
+	pinctrl_2: pinctrl@03860000 {
 		gpz: gpz {
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -913,7 +913,7 @@
 		};
 	};
 
-	pinctrl@106E0000 {
+	pinctrl_3: pinctrl@106E0000 {
 		gpv0: gpv0 {
 			gpio-controller;
 			#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 6a6abe14fd9b..b77dac61ffb5 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -96,32 +96,6 @@
 		};
 	};
 
-	combiner: interrupt-controller@10440000 {
-		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-			     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
-	};
-
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
-
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
-		};
-	};
-
 	adc: adc@126C0000 {
 		compatible = "samsung,exynos-adc-v1";
 		reg = <0x126C0000 0x100>;
@@ -135,36 +109,13 @@
 		status = "disabled";
 	};
 
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 0>;
-	};
-
-	pinctrl_3: pinctrl@106E0000 {
-		compatible = "samsung,exynos4x12-pinctrl";
-		reg = <0x106E0000 0x1000>;
-		interrupts = <0 72 0>;
-	};
-
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4212-pmu", "syscon";
-		clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-				"clkout4", "clkout8", "clkout9";
-		clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-			<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-			<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
-			<&clock CLK_XUSBXTI>;
-		#clock-cells = <1>;
-	};
-
-	g2d@10800000 {
+	g2d: g2d@10800000 {
 		compatible = "samsung,exynos4212-g2d";
 		reg = <0x10800000 0x1000>;
 		interrupts = <0 89 0>;
 		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
 		clock-names = "sclk_fimg2d", "fimg2d";
+		iommus = <&sysmmu_g2d>;
 		status = "disabled";
 	};
 
@@ -173,40 +124,7 @@
 			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
 		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
 
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,cam-if;
-		};
-
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,cam-if;
-		};
-
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,lcd-wb;
-			samsung,cam-if;
-		};
-
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4212-fimc";
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,isp-wb;
-			samsung,lcd-wb;
-		};
-
+		/* fimc_[0-3] are configured outside, under phandles */
 		fimc_lite_0: fimc-lite@12390000 {
 			compatible = "samsung,exynos4212-fimc-lite";
 			reg = <0x12390000 0x1000>;
@@ -214,6 +132,7 @@
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE0>;
 			clock-names = "flite";
+			iommus = <&sysmmu_fimc_lite0>;
 			status = "disabled";
 		};
 
@@ -224,6 +143,7 @@
 			power-domains = <&pd_isp>;
 			clocks = <&clock CLK_FIMC_LITE1>;
 			clock-names = "flite";
+			iommus = <&sysmmu_fimc_lite1>;
 			status = "disabled";
 		};
 
@@ -252,6 +172,9 @@
 				      "mcuispdiv1", "uart", "aclk200",
 				      "div_aclk200", "aclk400mcuisp",
 				      "div_aclk400mcuisp";
+			iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+				 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+			iommu-names = "isp", "drc", "fd", "mcuctl";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -284,29 +207,192 @@
 		status = "disabled";
 	};
 
-	exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4x12-usb2-phy";
-		samsung,sysreg-phandle = <&sys_reg>;
+	sysmmu_g2d: sysmmu@10A40000{
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 7>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
 	};
 
-	tmu@100C0000 {
-		compatible = "samsung,exynos4412-tmu";
+	sysmmu_fimc_isp: sysmmu@12260000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12260000 0x1000>;
 		interrupt-parent = <&combiner>;
-		interrupts = <2 4>;
-		reg = <0x100C0000 0x100>;
-		clocks = <&clock 383>;
-		clock-names = "tmu_apbif";
-		status = "disabled";
+		interrupts = <16 2>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_ISP>;
+		#iommu-cells = <0>;
 	};
 
-	hdmi: hdmi@12D00000 {
-		compatible = "samsung,exynos4212-hdmi";
+	sysmmu_fimc_drc: sysmmu@12270000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12270000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 3>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_DRC>;
+		#iommu-cells = <0>;
 	};
 
-	mixer: mixer@12C10000 {
-		compatible = "samsung,exynos4212-mixer";
-		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+	sysmmu_fimc_fd: sysmmu@122A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x122A0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 4>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FD>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_mcuctl: sysmmu@122B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x122B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 5>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_ISPCX>;
+		#iommu-cells = <0>;
 	};
+
+	sysmmu_fimc_lite0: sysmmu@123B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x123B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 0>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite1: sysmmu@123C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x123C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <16 1>;
+		power-domains = <&pd_isp>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
+		#iommu-cells = <0>;
+	};
+};
+
+&combiner {
+	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+		     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+};
+
+&exynos_usbphy {
+	compatible = "samsung,exynos4x12-usb2-phy";
+	samsung,sysreg-phandle = <&sys_reg>;
+};
+
+&fimc_0 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_1 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_2 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+	samsung,cam-if;
+};
+
+&fimc_3 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <1920 8192 1366 1920>;
+	samsung,rotators = <0>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+};
+
+&hdmi {
+	compatible = "samsung,exynos4212-hdmi";
+};
+
+&jpeg_codec {
+	compatible = "samsung,exynos4212-jpeg";
+};
+
+&mixer {
+	compatible = "samsung,exynos4212-mixer";
+	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+};
+
+&pinctrl_0 {
+	compatible = "samsung,exynos4x12-pinctrl";
+	reg = <0x11400000 0x1000>;
+	interrupts = <0 47 0>;
+};
+
+&pinctrl_1 {
+	compatible = "samsung,exynos4x12-pinctrl";
+	reg = <0x11000000 0x1000>;
+	interrupts = <0 46 0>;
+
+	wakup_eint: wakeup-interrupt-controller {
+		compatible = "samsung,exynos4210-wakeup-eint";
+		interrupt-parent = <&gic>;
+		interrupts = <0 32 0>;
+	};
+};
+
+&pinctrl_2 {
+	compatible = "samsung,exynos4x12-pinctrl";
+	reg = <0x03860000 0x1000>;
+	interrupt-parent = <&combiner>;
+	interrupts = <10 0>;
+};
+
+&pinctrl_3 {
+	compatible = "samsung,exynos4x12-pinctrl";
+	reg = <0x106E0000 0x1000>;
+	interrupts = <0 72 0>;
+};
+
+&pmu_system_controller {
+	compatible = "samsung,exynos4212-pmu", "syscon";
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+	#clock-cells = <1>;
+};
+
+&tmu {
+	compatible = "samsung,exynos4412-tmu";
+	interrupt-parent = <&combiner>;
+	interrupts = <2 4>;
+	reg = <0x100C0000 0x100>;
+	clocks = <&clock 383>;
+	clock-names = "tmu_apbif";
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index a0cc0b6f8f96..110dbd4fb884 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -81,14 +81,14 @@
 		interrupts = <0 54 0>;
 	};
 
-	rtc@101E0000 {
+	rtc: rtc@101E0000 {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
 		status = "disabled";
 	};
 
-	fimd@14400000 {
+	fimd: fimd@14400000 {
 		compatible = "samsung,exynos5250-fimd";
 		interrupt-parent = <&combiner>;
 		reg = <0x14400000 0x40000>;
@@ -98,7 +98,7 @@
 		status = "disabled";
 	};
 
-	dp-controller@145B0000 {
+	dp: dp-controller@145B0000 {
 		compatible = "samsung,exynos5-dp";
 		reg = <0x145B0000 0x1000>;
 		interrupts = <10 3>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index bc27cc2558fe..4fe186d01f8a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -131,6 +131,9 @@
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
 
 		voltage-regulators {
 			ldo1_reg: LDO1 {
@@ -410,3 +413,12 @@
 		};
 	};
 };
+
+&pinctrl_0 {
+	max77686_irq: max77686-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1eca97ee4bd6..b7f4122df456 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -177,30 +177,6 @@
 		};
 	};
 
-	i2c@12CD0000 {
-		ptn3460: lvds-bridge@20 {
-			compatible = "nxp,ptn3460";
-			reg = <0x20>;
-			powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-			edid-emulation = <5>;
-
-			ports {
-				port@0 {
-					bridge_out: endpoint {
-						remote-endpoint = <&panel_in>;
-					};
-				};
-
-				port@1 {
-					bridge_in: endpoint {
-						remote-endpoint = <&dp_out>;
-					};
-				};
-			};
-		};
-	};
-
 	sound {
 		compatible = "google,snow-audio-max98095";
 
@@ -507,6 +483,28 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
 
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			port@0 {
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+
 	max98095: codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 257e2f10525d..bf9bee67c416 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -230,6 +230,7 @@
 		interrupts = <0 91 0>;
 		clocks = <&clock CLK_G2D>;
 		clock-names = "fimg2d";
+		iommus = <&sysmmu_g2d>;
 	};
 
 	mfc: codec@11000000 {
@@ -239,13 +240,8 @@
 		power-domains = <&pd_mfc>;
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
-	};
-
-	rtc: rtc@101E0000 {
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		interrupt-parent = <&pmu_system_controller>;
-		status = "disabled";
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	tmu: tmu@10060000 {
@@ -276,26 +272,6 @@
 		};
 	};
 
-	serial@12C00000 {
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C10000 {
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C20000 {
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial@12C30000 {
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
 	sata: sata@122F0000 {
 		compatible = "snps,dwc-ahci";
 		samsung,sata-freq = <66>;
@@ -720,6 +696,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc0>;
 	};
 
 	gsc_1:  gsc@13e10000 {
@@ -729,6 +706,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc1>;
 	};
 
 	gsc_2:  gsc@13e20000 {
@@ -738,6 +716,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL2>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc2>;
 	};
 
 	gsc_3:  gsc@13e30000 {
@@ -747,6 +726,7 @@
 		power-domains = <&pd_gsc>;
 		clocks = <&clock CLK_GSCL3>;
 		clock-names = "gscl";
+		iommu = <&sysmmu_gsc3>;
 	};
 
 	hdmi: hdmi {
@@ -770,6 +750,7 @@
 		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
 			 <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "hdmi", "sclk_hdmi";
+		iommus = <&sysmmu_tv>;
 	};
 
 	dp_phy: video-phy@10040720 {
@@ -778,20 +759,6 @@
 		#phy-cells = <0>;
 	};
 
-	dp: dp-controller@145B0000 {
-		power-domains = <&pd_disp1>;
-		clocks = <&clock CLK_DP>;
-		clock-names = "dp";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-	};
-
-	fimd: fimd@14400000 {
-		power-domains = <&pd_disp1>;
-		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-		clock-names = "sclk_fimd", "fimd";
-	};
-
 	adc: adc@12D10000 {
 		compatible = "samsung,exynos-adc-v1";
 		reg = <0x12D10000 0x100>;
@@ -811,4 +778,287 @@
 		clocks = <&clock CLK_SSS>;
 		clock-names = "secss";
 	};
+
+	sysmmu_g2d: sysmmu@10A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu@11200000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11200000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <6 2>;
+		power-domains = <&pd_mfc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_l: sysmmu@11210000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11210000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <8 5>;
+		power-domains = <&pd_mfc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_rotator: sysmmu@11D40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11D40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg: sysmmu@11F20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F20000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_isp: sysmmu@13260000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13260000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_ISP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_drc: sysmmu@13270000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13270000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <11 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DRC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_fd: sysmmu@132A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132A0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 0>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_FD>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_scc: sysmmu@13280000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13280000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 2>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_SCC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_scp: sysmmu@13290000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13290000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_SCP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132B0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_MCU>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_odc: sysmmu@132C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <11 0>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_ODC>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_dis0: sysmmu@132D0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132D0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_dis1: sysmmu@132E0000{
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132E0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <9 4>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_3dnr: sysmmu@132F0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x132F0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <5 6>;
+		clock-names = "sysmmu";
+		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite0: sysmmu@13C40000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13C40000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 4>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimc_lite1: sysmmu@13C50000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13C50000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 1>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc0: sysmmu@13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc1: sysmmu@13E90000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E90000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc2: sysmmu@13EA0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13EA0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 4>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gsc3: sysmmu@13EB0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13EB0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 6>;
+		power-domains = <&pd_gsc>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1: sysmmu@14640000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14640000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 2>;
+		power-domains = <&pd_disp1>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu@14650000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14650000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <7 4>;
+		power-domains = <&pd_disp1>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+		#iommu-cells = <0>;
+	};
+};
+
+&dp {
+	power-domains = <&pd_disp1>;
+	clocks = <&clock CLK_DP>;
+	clock-names = "dp";
+	phys = <&dp_phy>;
+	phy-names = "dp";
+};
+
+&fimd {
+	power-domains = <&pd_disp1>;
+	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+	clock-names = "sclk_fimd", "fimd";
+	iommus = <&sysmmu_fimd1>;
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
 };
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index b82b6fa15f48..eeb4ac22cfce 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -13,6 +13,7 @@
 #include "exynos5420.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
 	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
@@ -38,325 +39,6 @@
 		};
 	};
 
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <0 4>;
-		samsung,dw-mshc-ddr-timing = <0 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-		vmmc-supply = <&ldo10_reg>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-		vmmc-supply = <&ldo19_reg>;
-		vqmmc-supply = <&ldo13_reg>;
-		bus-width = <4>;
-		cap-sd-highspeed;
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			interrupt-parent = <&gpx3>;
-			interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
-			};
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "PVDD_ALIVE_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo2_reg: LDO2 {
-					regulator-name = "PVDD_APIO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "PVDD_APIO_MMCON_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "PVDD_ADC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "PVDD_PLL_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "PVDD_ANAIP_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "PVDD_ANAIP_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "PVDD_ABB_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "PVDD_USB_3V3";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "PVDD_PRE_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "PVDD_USB_1V0";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PVDD_HSIC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "PVDD_APIO_MMCOFF_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "PVDD_PERI_2V8";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "PVDD_PERI_3V3";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-				};
-
-				ldo18_reg: LDO18 {
-					regulator-name = "PVDD_EMMC_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "PVDD_TFLASH_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo20_reg: LDO20 {
-					regulator-name = "PVDD_BTWIFI_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo21_reg: LDO21 {
-					regulator-name = "PVDD_CAM1IO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo23_reg: LDO23 {
-					regulator-name = "PVDD_MIFS_1V1";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "PVDD_CAM1_AVDD_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "PVDD_CAM0_AF_2V8";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				ldo27_reg: LDO27 {
-					regulator-name = "PVDD_G3DS_1V0";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo28_reg: LDO28 {
-					regulator-name = "PVDD_TSP_3V3";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo29_reg: LDO29 {
-					regulator-name = "PVDD_AUDIO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo31_reg: LDO31 {
-					regulator-name = "PVDD_PERI_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo32_reg: LDO32 {
-					regulator-name = "PVDD_LCD_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo33_reg: LDO33 {
-					regulator-name = "PVDD_CAM0IO_1V8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo35_reg: LDO35 {
-					regulator-name = "PVDD_CAM0_DVDD_1V2";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo38_reg: LDO38 {
-					regulator-name = "PVDD_CAM0_AVDD_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "PVDD_MIF_1V1";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "PVDD_INT_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "PVDD_G3D_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "PVDD_LPDDR3_1V2";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "PVDD_KFC_1V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "VIN_LLDO_1V4";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "VIN_MLDO_2V0";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <2000000>;
-					regulator-always-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "VIN_HLDO_3V5";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3500000>;
-					regulator-always-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "PVDD_EMMCF_2V8";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-			};
-		};
-	};
-
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -376,3 +58,335 @@
 &cci {
 	status = "disabled";
 };
+
+&hsi2c_4 {
+	status = "okay";
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+		s2mps11,buck2-ramp-delay = <12>;
+		s2mps11,buck34-ramp-delay = <12>;
+		s2mps11,buck16-ramp-delay = <12>;
+		s2mps11,buck6-ramp-enable = <1>;
+		s2mps11,buck2-ramp-enable = <1>;
+		s2mps11,buck3-ramp-enable = <1>;
+		s2mps11,buck4-ramp-enable = <1>;
+
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "PVDD_ALIVE_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "PVDD_APIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "PVDD_APIO_MMCON_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "PVDD_ADC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "PVDD_PLL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "PVDD_ANAIP_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "PVDD_ANAIP_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "PVDD_ABB_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "PVDD_USB_3V3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "PVDD_PRE_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "PVDD_USB_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PVDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "PVDD_APIO_MMCOFF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "PVDD_PERI_2V8";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "PVDD_PERI_3V3";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "PVDD_EMMC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "PVDD_TFLASH_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "PVDD_BTWIFI_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "PVDD_CAM1IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "PVDD_MIFS_1V1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "PVDD_CAM1_AVDD_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "PVDD_CAM0_AF_2V8";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "PVDD_G3DS_1V0";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "PVDD_TSP_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "PVDD_AUDIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "PVDD_PERI_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "PVDD_LCD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "PVDD_CAM0IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "PVDD_CAM0_DVDD_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "PVDD_CAM0_AVDD_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "PVDD_MIF_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "PVDD_INT_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "PVDD_G3D_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "PVDD_LPDDR3_1V2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "PVDD_KFC_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO_1V4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO_2V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO_3V5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "PVDD_EMMCF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+		};
+	};
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	vmmc-supply = <&ldo10_reg>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 146e71118a72..8f4d76c5e11c 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -1027,7 +1027,7 @@
 	};
 };
 
-&uart_3 {
+&serial_3 {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 9103f2381a6d..98871f972c8a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -64,105 +64,6 @@
 		};
 	};
 
-	rtc@101E0000 {
-		status = "okay";
-	};
-
-	codec@11000000 {
-		samsung,mfc-r = <0x43000000 0x800000>;
-		samsung,mfc-l = <0x51000000 0x800000>;
-	};
-
-	mmc@12200000 {
-		status = "okay";
-		broken-cd;
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <0 4>;
-		samsung,dw-mshc-ddr-timing = <0 2>;
-		samsung,dw-mshc-hs400-timing = <0 2>;
-		samsung,read-strobe-delay = <90>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
-			     &sd0_rclk>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-	};
-
-	mmc@12220000 {
-		status = "okay";
-		card-detect-delay = <200>;
-		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3>;
-		samsung,dw-mshc-ddr-timing = <1 2>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-		bus-width = <4>;
-		cap-sd-highspeed;
-	};
-
-	dp-controller@145B0000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&dp_hpd>;
-		samsung,color-space = <0>;
-		samsung,dynamic-range = <0>;
-		samsung,ycbcr-coeff = <0>;
-		samsung,color-depth = <1>;
-		samsung,link-rate = <0x0a>;
-		samsung,lane-count = <4>;
-		status = "okay";
-	};
-
-	fimd@14400000 {
-		status = "okay";
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: timing@0 {
-				clock-frequency = <50000>;
-				hactive = <2560>;
-				vactive = <1600>;
-				hfront-porch = <48>;
-				hback-porch = <80>;
-				hsync-len = <32>;
-				vback-porch = <16>;
-				vfront-porch = <8>;
-				vsync-len = <6>;
-			};
-		};
-	};
-
-	pinctrl@13400000 {
-		hdmi_hpd_irq: hdmi-hpd-irq {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14000000 {
-		usb300_vbus_en: usb300-vbus-en {
-			samsung,pins = "gpg0-5";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		usb301_vbus_en: usb301-vbus-en {
-			samsung,pins = "gpg1-4";
-			samsung,pin-function = <1>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	hdmi@14530000 {
-		status = "okay";
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd_irq>;
-	};
-
 	usb300_vbus_reg: regulator-usb300 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS0";
@@ -185,238 +86,338 @@
 		enable-active-high;
 	};
 
-	phy@12100000 {
-		vbus-supply = <&usb300_vbus_reg>;
-	};
+};
 
-	phy@12500000 {
-		vbus-supply = <&usb301_vbus_reg>;
+&dp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,dynamic-range = <0>;
+	samsung,ycbcr-coeff = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <4>;
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: timing@0 {
+			clock-frequency = <50000>;
+			hactive = <2560>;
+			vactive = <1600>;
+			hfront-porch = <48>;
+			hback-porch = <80>;
+			hsync-len = <32>;
+			vback-porch = <16>;
+			vfront-porch = <8>;
+			vsync-len = <6>;
+		};
 	};
+};
 
-	i2c_2: i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+};
 
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
+&hsi2c_4 {
+	status = "okay";
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+		s2mps11,buck2-ramp-delay = <12>;
+		s2mps11,buck34-ramp-delay = <12>;
+		s2mps11,buck16-ramp-delay = <12>;
+		s2mps11,buck6-ramp-enable = <1>;
+		s2mps11,buck2-ramp-enable = <1>;
+		s2mps11,buck3-ramp-enable = <1>;
+		s2mps11,buck4-ramp-enable = <1>;
+
+		s2mps11_osc: clocks {
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
 		};
-	};
 
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "vdd_ldo1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "vdd_ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "vdd_ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "vdd_ldo6";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "vdd_ldo7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "vdd_ldo8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "vdd_ldo9";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "vdd_ldo10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "vdd_ldo11";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "vdd_ldo12";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "vdd_ldo13";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "vdd_ldo15";
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "vdd_ldo16";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "tsp_avdd";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "vdd_sd";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "tsp_io";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_mem";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd_kfc";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "vdd_1.0v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "vdd_1.8v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vdd_2.8v_ldo";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3750000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "vdd_vmem";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <3100000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "vdd_ldo16";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "tsp_avdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "tsp_io";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1.0v_ldo";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_1.8v_ldo";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2.8v_ldo";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_vmem";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
 			};
 		};
 	};
 };
+
+&i2c_2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	status = "okay";
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	broken-cd;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8
+		     &sd0_rclk>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_2 {
+	usb300_vbus_en: usb300-vbus-en {
+		samsung,pins = "gpg0-5";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+	usb301_vbus_en: usb301-vbus-en {
+		samsung,pins = "gpg1-4";
+		samsung,pin-function = <1>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&usbdrd_phy0 {
+	vbus-supply = <&usb300_vbus_reg>;
+};
+
+&usbdrd_phy1 {
+	vbus-supply = <&usb301_vbus_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 45317538bbae..534f27ceb10b 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -179,6 +179,8 @@
 		clocks = <&clock CLK_MFC>;
 		clock-names = "mfc";
 		power-domains = <&mfc_pd>;
+		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+		iommu-names = "left", "right";
 	};
 
 	mmc_0: mmc@12200000 {
@@ -264,9 +266,8 @@
 	mfc_pd: power-domain@10044060 {
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
-			<&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "pclk0", "clk0";
+		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
+		clock-names = "oscclk", "clk0";
 		#power-domain-cells = <0>;
 	};
 
@@ -280,16 +281,12 @@
 		compatible = "samsung,exynos4210-pd";
 		reg = <0x100440C0 0x20>;
 		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
+		clocks = <&clock CLK_FIN_PLL>,
 			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-			 <&clock CLK_MOUT_SW_ACLK300>,
 			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-			 <&clock CLK_MOUT_SW_ACLK400>,
 			 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
 			 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-		clock-names = "oscclk", "pclk0", "clk0",
-			      "pclk1", "clk1", "pclk2", "clk2",
-			      "asb0", "asb1";
+		clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
 	};
 
 	pinctrl_0: pinctrl@13400000 {
@@ -328,13 +325,6 @@
 		interrupts = <0 47 0>;
 	};
 
-	rtc: rtc@101E0000 {
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		interrupt-parent = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
 	amba {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -416,6 +406,9 @@
 			<&clock_audss EXYNOS_I2S_BUS>,
 			<&clock_audss EXYNOS_SCLK_I2S>;
 		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk0";
+		#sound-dai-cells = <1>;
 		samsung,idma-addr = <0x03000000>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s0_bus>;
@@ -430,6 +423,9 @@
 		dma-names = "tx", "rx";
 		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
 		clock-names = "iis", "i2s_opclk0";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk1";
+		#sound-dai-cells = <1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s1_bus>;
 		status = "disabled";
@@ -443,6 +439,9 @@
 		dma-names = "tx", "rx";
 		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
 		clock-names = "iis", "i2s_opclk0";
+		#clock-cells = <1>;
+		clock-output-names = "i2s_cdclk2";
+		#sound-dai-cells = <1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2s2_bus>;
 		status = "disabled";
@@ -496,26 +495,6 @@
 		status = "disabled";
 	};
 
-	uart_0: serial@12C00000 {
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_1: serial@12C10000 {
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_2: serial@12C20000 {
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	uart_3: serial@12C30000 {
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
 	pwm: pwm@12dd0000 {
 		compatible = "samsung,exynos4210-pwm";
 		reg = <0x12dd0000 0x100>;
@@ -531,17 +510,9 @@
 		#phy-cells = <0>;
 	};
 
-	dp: dp-controller@145B0000 {
-		clocks = <&clock CLK_DP1>;
-		clock-names = "dp";
-		phys = <&dp_phy>;
-		phy-names = "dp";
-		power-domains = <&disp_pd>;
-	};
-
 	mipi_phy: video-phy@10040714 {
 		compatible = "samsung,s5pv210-mipi-video-phy";
-		reg = <0x10040714 12>;
+		syscon = <&pmu_system_controller>;
 		#phy-cells = <1>;
 	};
 
@@ -558,12 +529,6 @@
 		status = "disabled";
 	};
 
-	fimd: fimd@14400000 {
-		clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&disp_pd>;
-	};
-
 	adc: adc@12D10000 {
 		compatible = "samsung,exynos-adc-v2";
 		reg = <0x12D10000 0x100>;
@@ -750,6 +715,7 @@
 			 <&clock CLK_SCLK_HDMI>;
 		clock-names = "mixer", "hdmi", "sclk_hdmi";
 		power-domains = <&disp_pd>;
+		iommus = <&sysmmu_tv>;
 	};
 
 	gsc_0: video-scaler@13e00000 {
@@ -759,6 +725,7 @@
 		clocks = <&clock CLK_GSCL0>;
 		clock-names = "gscl";
 		power-domains = <&gsc_pd>;
+		iommus = <&sysmmu_gscl0>;
 	};
 
 	gsc_1: video-scaler@13e10000 {
@@ -768,6 +735,25 @@
 		clocks = <&clock CLK_GSCL1>;
 		clock-names = "gscl";
 		power-domains = <&gsc_pd>;
+		iommus = <&sysmmu_gscl1>;
+	};
+
+	jpeg_0: jpeg@11F50000 {
+		compatible = "samsung,exynos5420-jpeg";
+		reg = <0x11F50000 0x1000>;
+		interrupts = <0 89 0>;
+		clock-names = "jpeg";
+		clocks = <&clock CLK_JPEG>;
+		iommus = <&sysmmu_jpeg0>;
+	};
+
+	jpeg_1: jpeg@11F60000 {
+		compatible = "samsung,exynos5420-jpeg";
+		reg = <0x11F60000 0x1000>;
+		interrupts = <0 168 0>;
+		clock-names = "jpeg";
+		clocks = <&clock CLK_JPEG2>;
+		iommus = <&sysmmu_jpeg1>;
 	};
 
 	pmu_system_controller: system-controller@10040000 {
@@ -962,4 +948,221 @@
 		samsung,sysreg-phandle = <&sysreg_system_controller>;
 		samsung,pmureg-phandle = <&pmu_system_controller>;
 	};
+
+	sysmmu_g2dr: sysmmu@0x10A60000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A60000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <24 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_g2dw: sysmmu@0x10A70000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x10A70000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_tv: sysmmu@0x14650000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14650000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <7 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+		power-domains = <&disp_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gscl0: sysmmu@0x13E80000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E80000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+		power-domains = <&gsc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_gscl1: sysmmu@0x13E90000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x13E90000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <2 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+		power-domains = <&gsc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler0r: sysmmu@0x12880000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12880000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 4>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler1r: sysmmu@0x12890000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x12890000 0x1000>;
+		interrupts = <0 186 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler2r: sysmmu@0x128A0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128A0000 0x1000>;
+		interrupts = <0 188 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler0w: sysmmu@0x128C0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128C0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <27 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler1w: sysmmu@0x128D0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128D0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <22 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_scaler2w: sysmmu@0x128E0000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x128E0000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <19 6>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg0: sysmmu@0x11F10000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F10000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <4 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_jpeg1: sysmmu@0x11F20000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11F20000 0x1000>;
+		interrupts = <0 169 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_l: sysmmu@0x11200000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11200000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <6 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+		power-domains = <&mfc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_mfc_r: sysmmu@0x11210000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x11210000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <8 5>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+		power-domains = <&mfc_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1_0: sysmmu@0x14640000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14640000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 2>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		power-domains = <&disp_pd>;
+		#iommu-cells = <0>;
+	};
+
+	sysmmu_fimd1_1: sysmmu@0x14680000 {
+		compatible = "samsung,exynos-sysmmu";
+		reg = <0x14680000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <3 0>;
+		clock-names = "sysmmu", "master";
+		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+		power-domains = <&disp_pd>;
+		#iommu-cells = <0>;
+	};
+};
+
+&dp {
+	clocks = <&clock CLK_DP1>;
+	clock-names = "dp";
+	phys = <&dp_phy>;
+	phy-names = "dp";
+	power-domains = <&disp_pd>;
+};
+
+&fimd {
+	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
+	clock-names = "sclk_fimd", "fimd";
+	power-domains = <&disp_pd>;
+	iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
+	iommu-names = "m0", "m1";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	interrupt-parent = <&pmu_system_controller>;
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
new file mode 100644
index 000000000000..8adf455744e9
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -0,0 +1,479 @@
+/*
+ * Hardkernel Odroid XU3 board device tree source
+ *
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5800.dtsi"
+
+/ {
+	memory {
+		reg = <0x40000000 0x7EA00000>;
+	};
+
+	chosen {
+		linux,stdout-path = &serial_2;
+	};
+
+	firmware@02073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 1>;
+	};
+
+	pwmleds {
+		compatible = "pwm-leds";
+
+		greenled {
+			label = "green:mmc0";
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max_brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		blueled {
+			label = "blue:heartbeat";
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max_brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpioleds {
+		compatible = "gpio-leds";
+		redled {
+			label = "red:microSD";
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU3";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-rates = <0>,
+			<0>,
+			<19200000>;
+};
+
+&fimd {
+	status = "okay";
+};
+
+
+&hdmi {
+	status = "okay";
+	hpd-gpio = <&gpx3 7 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	s2mps11_pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+		s2mps11,buck2-ramp-delay = <12>;
+		s2mps11,buck34-ramp-delay = <12>;
+		s2mps11,buck16-ramp-delay = <12>;
+		s2mps11,buck6-ramp-enable = <1>;
+		s2mps11,buck2-ramp-enable = <1>;
+		s2mps11,buck3-ramp-enable = <1>;
+		s2mps11,buck4-ramp-enable = <1>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vdd_ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vdd_ldo13";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <3100000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "vdd_ldo16";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "tsp_avdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "tsp_io";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1.0v_ldo";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_1.8v_ldo";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2.8v_ldo";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_vmem";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+	max98090: max98090@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 0>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c_2 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+	status = "okay";
+
+	hdmiddc@50 {
+		compatible = "samsung,exynos4210-hdmiddc";
+		reg = <0x50>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+};
+
+&mfc {
+	samsung,mfc-r = <0x43000000 0x800000>;
+	samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+};
+
+&pinctrl_0 {
+	hdmi_hpd_irq: hdmi-hpd-irq {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <1>;
+		samsung,pin-drv = <0>;
+	};
+
+	s2mps11_irq: s2mps11-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <0xf>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pinctrl_1 {
+	emmc_nrst_pin: emmc-nrst {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <0>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "otg";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
new file mode 100644
index 000000000000..c06882bbb822
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -0,0 +1,20 @@
+/*
+ * Hardkernel Odroid XU3-Lite board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU3 Lite";
+	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index edc25cf1d717..78e6a502f320 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -11,348 +11,11 @@
 */
 
 /dts-v1/;
-#include "exynos5800.dtsi"
+#include "exynos5422-odroidxu3-common.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
-	memory {
-		reg = <0x40000000 0x7EA00000>;
-	};
-
-	chosen {
-		linux,stdout-path = &serial_2;
-	};
-
-	fimd@14400000 {
-		status = "okay";
-	};
-
-	firmware@02073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	hsi2c_4: i2c@12CA0000 {
-		status = "okay";
-
-		s2mps11_pmic@66 {
-			compatible = "samsung,s2mps11-pmic";
-			reg = <0x66>;
-			s2mps11,buck2-ramp-delay = <12>;
-			s2mps11,buck34-ramp-delay = <12>;
-			s2mps11,buck16-ramp-delay = <12>;
-			s2mps11,buck6-ramp-enable = <1>;
-			s2mps11,buck2-ramp-enable = <1>;
-			s2mps11,buck3-ramp-enable = <1>;
-			s2mps11,buck4-ramp-enable = <1>;
-
-			s2mps11_osc: clocks {
-				#clock-cells = <1>;
-				clock-output-names = "s2mps11_ap",
-						"s2mps11_cp", "s2mps11_bt";
-			};
-
-			regulators {
-				ldo1_reg: LDO1 {
-					regulator-name = "vdd_ldo1";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "vdd_ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "vdd_ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "vdd_ldo6";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "vdd_ldo7";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "vdd_ldo8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "vdd_ldo9";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "vdd_ldo10";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "vdd_ldo11";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					regulator-always-on;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "vdd_ldo12";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "vdd_ldo13";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "vdd_ldo15";
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					regulator-always-on;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "vdd_ldo16";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "tsp_avdd";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo19_reg: LDO19 {
-					regulator-name = "vdd_sd";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo24_reg: LDO24 {
-					regulator-name = "tsp_io";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo26_reg: LDO26 {
-					regulator-name = "vdd_ldo26";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "vdd_mif";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "vdd_arm";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "vdd_int";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "vdd_g3d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck5_reg: BUCK5 {
-					regulator-name = "vdd_mem";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1400000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck6_reg: BUCK6 {
-					regulator-name = "vdd_kfc";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck7_reg: BUCK7 {
-					regulator-name = "vdd_1.0v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck8_reg: BUCK8 {
-					regulator-name = "vdd_1.8v_ldo";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck9_reg: BUCK9 {
-					regulator-name = "vdd_2.8v_ldo";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3750000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				buck10_reg: BUCK10 {
-					regulator-name = "vdd_vmem";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&emmc_nrst_pin>;
-		pinctrl-names = "default";
-		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 1>;
-	};
-
-	i2c_2: i2c@12C80000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-max-bus-freq = <66000>;
-		status = "okay";
-
-		hdmiddc@50 {
-			compatible = "samsung,exynos4210-hdmiddc";
-			reg = <0x50>;
-		};
-	};
-
-	rtc@101E0000 {
-		status = "okay";
-	};
-};
-
-&hdmi {
-	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-
-	vdd_osc-supply = <&ldo7_reg>;
-	vdd_pll-supply = <&ldo6_reg>;
-	vdd-supply = <&ldo6_reg>;
-};
-
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
-&mmc_0 {
-	status = "okay";
-	mmc-pwrseq = <&emmc_pwrseq>;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-};
-
-&pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst {
-		samsung,pins = "gpd1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "otg";
 };
 
 &i2c_0 {
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
index 268609a42b2c..a98501bab6fc 100644
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ b/arch/arm/boot/dts/exynos5440-sd5v1.dts
@@ -27,13 +27,13 @@
 		};
 	};
 
-	gmac: ethernet@00230000 {
-		fixed_phy;
-		phy_addr = <1>;
-	};
-
 	spi {
 		status = "disabled";
 	};
 
 };
+
+&gmac {
+	fixed_phy;
+	phy_addr = <1>;
+};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ff55dac6e219..e4443f4e6572 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -20,59 +20,58 @@
 		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
 	};
 
-	spi_0: spi@D0000 {
-
-		flash: w25q128@0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "winbond,w25q128";
-			spi-max-frequency = <15625000>;
-			reg = <0>;
-			controller-data {
-				samsung,spi-feedback-delay = <0>;
-			};
+	fixed-rate-clocks {
+		xtal {
+			compatible = "samsung,clock-xtal";
+			clock-frequency = <50000000>;
+		};
+	};
+};
 
-			partition@00000 {
-				label = "BootLoader";
-				reg = <0x60000 0x80000>;
-				read-only;
-			};
+&pcie_0 {
+	reset-gpio = <&pin_ctrl 5 0>;
+	status = "okay";
+};
 
-			partition@e0000 {
-				label = "Recovery-Kernel";
-				reg = <0xe0000 0x300000>;
-				read-only;
-			};
+&pcie_1 {
+	reset-gpio = <&pin_ctrl 22 0>;
+	status = "okay";
+};
 
-			partition@3e0000 {
-				label = "CRAM-FS";
-				reg = <0x3e0000 0x700000>;
-				read-only;
-			};
+&spi_0 {
+	flash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128";
+		spi-max-frequency = <15625000>;
+		reg = <0>;
+		controller-data {
+			samsung,spi-feedback-delay = <0>;
+		};
 
-			partition@ae0000 {
-				label = "User-Data";
-				reg = <0xae0000 0x520000>;
-			};
+		partition@00000 {
+			label = "BootLoader";
+			reg = <0x60000 0x80000>;
+			read-only;
+		};
 
+		partition@e0000 {
+			label = "Recovery-Kernel";
+			reg = <0xe0000 0x300000>;
+			read-only;
 		};
 
-	};
+		partition@3e0000 {
+			label = "CRAM-FS";
+			reg = <0x3e0000 0x700000>;
+			read-only;
+		};
 
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
+		partition@ae0000 {
+			label = "User-Data";
+			reg = <0xae0000 0x520000>;
 		};
-	};
 
-	pcie@290000 {
-		reset-gpio = <&pin_ctrl 5 0>;
-		status = "okay";
 	};
 
-	pcie@2a0000 {
-		reset-gpio = <&pin_ctrl 22 0>;
-		status = "okay";
-	};
 };
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 59d9416b3b03..f18b51f2eeaa 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -279,7 +279,7 @@
 		clock-names = "usbhost";
 	};
 
-	pcie@290000 {
+	pcie_0: pcie@290000 {
 		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
 		reg = <0x290000 0x1000
 			0x270000 0x1000
@@ -300,7 +300,7 @@
 		status = "disabled";
 	};
 
-	pcie@2a0000 {
+	pcie_1: pcie@2a0000 {
 		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
 		reg = <0x2a0000 0x1000
 			0x272000 0x1000
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 02eb8b15374f..7d5b386b5ae6 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -990,7 +990,7 @@
 	};
 };
 
-&uart_3 {
+&serial_3 {
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 82045398bf1f..a8b1c53ebe46 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -74,6 +74,12 @@
 				status = "okay";
 			};
 
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_b>;
+				status = "okay";
+			};
+
 			duart: serial@80070000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_a>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index bbcfb5a19c77..c892d58e8dad 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -308,6 +308,39 @@
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
+
+				i2c_pins_a: i2c@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_b: i2c@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX23_PAD_LCD_ENABLE__I2C_SCL
+						MX23_PAD_LCD_HSYNC__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				i2c_pins_c: i2c@2 {
+					reg = <2>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_DATA1__I2C_SCL
+						MX23_PAD_SSP1_DATA2__I2C_SDA
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
 			};
 
 			digctl@8001c000 {
@@ -444,8 +477,13 @@
 				status = "disabled";
 			};
 
-			i2c@80058000 {
+			i2c: i2c@80058000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-i2c";
 				reg = <0x80058000 0x2000>;
+				interrupts = <27>;
+				clock-frequency = <100000>;
 				dmas = <&dma_apbx 3>;
 				dma-names = "rx-tx";
 				status = "disabled";
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
new file mode 100644
index 000000000000..df26e542ab3a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+	model = "Armadeus APF6 Solo Module on APF6Dev Board";
+	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
new file mode 100644
index 000000000000..bb92f309c191
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
@@ -0,0 +1,159 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 4";
+	compatible = "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	display0: display@di0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+
+		port@0 {
+			reg = <0>;
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	lcd_panel: display@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "lg,lg4573";
+		spi-max-frequency = <10000000>;
+		reg = <0>;
+		power-on-delay = <10>;
+
+		display-timings {
+			480x800p57 {
+				native-mode;
+				clock-frequency = <27000027>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <10>;
+				hback-porch = <59>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_ipu_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x31
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0xE1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0xE1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0xE1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0xE1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0xE1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0xE1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0xE1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0xE1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0xE1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0xE1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0xE1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0xE1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0xE1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0xE1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0xE1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0xe1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0xE1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0xE1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0xE1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0xE1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0xE1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0xE1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0xE1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0xE1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0xE1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
new file mode 100644
index 000000000000..3d5ad2cc7e22
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
@@ -0,0 +1,97 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-aristainetos2.dtsi"
+
+/ {
+	model = "aristainetos2 i.MX6 Dual Lite Board 7";
+	compatible = "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	panel: panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight>;
+		enable-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touch: touch@4d {
+		compatible = "atmel,maxtouch";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <9 8>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			lvds0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_lvds0>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts
index e0b7fe8e18f8..2a43917d048e 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts
@@ -7,9 +7,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/boot/dts/imx6dl-gw551x.dts b/arch/arm/boot/dts/imx6dl-gw551x.dts
new file mode 100644
index 000000000000..82d5f85722ea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW551X";
+	compatible = "gw,imx6dl-gw551x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index 7369d2d7da3e..d5c966031962 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -8,9 +8,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index f94bf72832af..4b0ec0703825 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -106,6 +106,10 @@
 	};
 };
 
+&gpt {
+	compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+};
+
 &hdmi {
 	compatible = "fsl,imx6dl-hdmi";
 };
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
new file mode 100644
index 000000000000..4e4de821d9e5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apf6dev.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-apf6.dtsi"
+#include "imx6qdl-apf6dev.dtsi"
+
+/ {
+	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
+	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
index 670bd8c4c847..353425edcdf4 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@@ -7,9 +7,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/boot/dts/imx6q-gw551x.dts b/arch/arm/boot/dts/imx6q-gw551x.dts
new file mode 100644
index 000000000000..2c7feeef1b0e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw551x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw551x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW551X";
+	compatible = "gw,imx6q-gw551x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts
index 0f6044553a24..1884c16784e2 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6q-hummingboard.dts
@@ -8,9 +8,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
new file mode 100644
index 000000000000..1ebf29f43a24
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Bluetooth */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* Wi-Fi */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <38400000>;
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	apf6 {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
+				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
+				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x1b0b0 /* WL_EN */
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* WL_IRQ */
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
new file mode 100644
index 000000000000..e26ebeb5b45c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -0,0 +1,479 @@
+/*
+ * Copyright 2015 Armadeus Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	display@di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_disp1>;
+
+		display-timings {
+			lw700 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+
+		port {
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		user-button {
+			label = "User button";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_MISC>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		user-led {
+			label = "User LED";
+			gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: usb-h1-vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: usb-otg-vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6-armadeus-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6-armadeus-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 10 GPIO_ACTIVE_LOW>,
+		   <&gpio4 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "semtech,sx8654";
+		reg = <0x48>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+/* GPS */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* GSM */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+/* console */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* microSD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpios>;
+
+	apf6dev {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
+			>;
+		};
+
+		pinctrl_gpios: gpiosgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
+				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 	0x100b1
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 	0x100b1
+				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 	0x100b1
+				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 	0x100b1
+				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 	0x100b1
+				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 	0x100b1
+				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21  	0x100b1
+			>;
+		};
+
+		pinctrl_gsm: gsmgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			>;
+		};
+
+		pinctrl_ipu1_disp1: ipu1disp1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_spdif: spdifgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+			>;
+		};
+
+		pinctrl_touchscreen: touchscreengrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
new file mode 100644
index 000000000000..1d85de2befb3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -0,0 +1,633 @@
+/*
+ * support for the imx6 based aristainetos2 board
+ *
+ * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_2p5v: 2p5v {
+			compatible = "regulator-fixed";
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usbh1_vbus: usb-h1-vbus {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_usbotg_vbus: usb-otg-vbus {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <3>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
+		    &gpio4 10 GPIO_ACTIVE_HIGH
+		    &gpio4 11 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&ecspi4 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "okay";
+
+	flash: m25p80@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q128a11";
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <04 0x8>;
+
+		regulators {
+			bcore1 {
+				regulator-name = "bcore1";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bcore2 {
+				regulator-name = "bcore2";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bpro {
+				regulator-name = "bpro";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bperi {
+				regulator-name = "bperi";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bmem {
+				regulator-name = "bmem";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo2 {
+				regulator-name = "ldo2";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo3 {
+				regulator-name = "ldo3";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo4 {
+				regulator-name = "ldo4";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5 {
+				regulator-name = "ldo5";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo6 {
+				regulator-name = "ldo6";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo7 {
+				regulator-name = "ldo7";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo8 {
+				regulator-name = "ldo8";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo9 {
+				regulator-name = "ldo9";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo10 {
+				regulator-name = "ldo10";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo11 {
+				regulator-name = "ldo11";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			bio {
+				regulator-name = "bio";
+				regulator-always-on = <1>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+
+	tmp103: tmp103@71 {
+		compatible = "ti,tmp103";
+		reg = <0x71>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	expander: tca6416@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@68 {
+		compatible = "dallas,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	eeprom@50{
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@57{
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
+	txd0-skew-ps = <0>;
+	txd1-skew-ps = <0>;
+	txd2-skew-ps = <0>;
+	txd3-skew-ps = <0>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&pcie {
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usbotg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio>;
+
+	pinctrl_audmux: audmux {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x100b1 /* SS0# */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1 /* SS1# */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1 /* SS2# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26   0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x100b1 /* SS1# */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
+			MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0 /* led enable */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* LCD power enable */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* led yellow */
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0 /* led red */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b0 /* led green */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0 /* led blue */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* Profibus IRQ */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0 /* FPGA IRQ */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b0 /* spi bus #2 SS driver enable */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0 /* RST_LOC# PHY reset input (has pull-down!)*/
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b0b0 /* USB_OTG_ID = GPIO1_24*/
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0 /* Touchscreen IRQ */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b0 /* PCIe reset */
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpmi-nand {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x1b0b0 /* backlight enable */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B	  0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B	  0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_aristainetos2_usbh1_vbus: aristainetos-usbh1-vbus {
+		fsl,pins = <MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x130b0>;
+	};
+
+	pinctrl_aristainetos2_usbotg_vbus: aristainetos-usbotg-vbus {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW4__USB_OTG_PWR 0x130b0>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0 /* SD1 card detect input */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0 /* SD1 write protect input */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x71
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x71
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x71
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x71
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x71
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x71
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0 /* SD2 level shifter output enable */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0 /* SD2 card detect input */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0 /* SD2 write protect input */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index d033bb182060..59e5d15e3ec4 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -7,9 +7,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
new file mode 100644
index 000000000000..d1866a0a2f13
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -0,0 +1,314 @@
+/*
+ * Copyright 2014 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		nand = &gpmi;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		bootargs = "console=ttymxc1,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: user1 {
+			label = "user1";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_5p0v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "5P0V";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_usb_h1_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	gpio: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio_exp: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx6qdl-gw51xx {
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+			>;
+		};
+
+		pinctrl_gpio_leds: gpioledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+			>;
+		};
+
+		pinctrl_gpmi_nand: gpminandgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 151a3db2aea9..62a82f3eba88 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -7,9 +7,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -192,6 +191,12 @@
 			>;
 		};
 
+		pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+			>;
+		};
+
 		pinctrl_hummingboard_pwm1: pwm1grp {
 			fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>;
 		};
@@ -245,6 +250,13 @@
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
+	reset-gpio = <&gpio3 4 0>;
+	status = "okay";
+};
+
 &pwm1 {
 	 pinctrl-names = "default";
 	 pinctrl-0 = <&pinctrl_hummingboard_pwm1>;
@@ -263,7 +275,6 @@
 };
 
 &ssi1 {
-	fsl,mode = "i2s-slave";
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
index 4a1820309cdb..469ef58ce4bc 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
@@ -10,9 +10,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
index 349f82be816e..6d4069cc9419 100644
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
@@ -7,9 +7,8 @@
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License.
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
  *
  *     This file is distributed in the hope that it will be useful
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -39,15 +38,98 @@
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_sdio: sdio-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_brcm: brcm-reg {
+			compatible = "regulator-fixed";
+			enable-active-high;
+			gpio = <&gpio3 19 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+			regulator-name = "brcm_reg";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			startup-delay-us = <200000>;
+		};
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_sdio>;
+		clock-names = "ext_clock";
+	};
+};
 
 &iomuxc {
 	microsom {
+		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+			>;
+		};
+
 		pinctrl_microsom_uart1: microsom-uart1 {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
 				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
 			>;
 		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
 	};
 };
 
@@ -56,3 +138,23 @@
 	pinctrl-0 = <&pinctrl_microsom_uart1>;
 	status = "okay";
 };
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 08218120e770..3af16dfe417b 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -122,7 +122,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds {
+	backlight_lvds: backlight_lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -130,6 +130,17 @@
 		power-supply = <&reg_3p3v>;
 		status = "okay";
 	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &audmux {
@@ -379,18 +390,11 @@
 		fsl,data-width = <18>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 0b28a9d5241e..e00c44f6a0df 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -121,7 +121,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds {
+	backlight_lvds: backlight_lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -129,6 +129,17 @@
 		power-supply = <&reg_3p3v>;
 		status = "okay";
 	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
 };
 
 &audmux {
@@ -374,18 +385,11 @@
 		fsl,data-width = <18>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index f74a8ded515f..e6d13592080d 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -119,6 +119,34 @@
 			status = "disabled";
 		};
 
+		hdmi: hdmi@0120000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x00120000 0x9000>;
+			interrupts = <0 115 0x04>;
+			gpr = <&gpr>;
+			clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+				 <&clks IMX6QDL_CLK_HDMI_ISFR>;
+			clock-names = "iahb", "isfr";
+			status = "disabled";
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_hdmi>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_hdmi>;
+				};
+			};
+		};
+
 		timer@00a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
@@ -343,6 +371,7 @@
 				clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
 					 <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
 				clock-names = "per", "ahb";
+				power-domains = <&gpc 1>;
 				resets = <&src 1>;
 				iram = <&ocram>;
 			};
@@ -778,34 +807,6 @@
 				};
 			};
 
-			hdmi: hdmi@0120000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x00120000 0x9000>;
-				interrupts = <0 115 0x04>;
-				gpr = <&gpr>;
-				clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
-					 <&clks IMX6QDL_CLK_HDMI_ISFR>;
-				clock-names = "iahb", "isfr";
-				status = "disabled";
-
-				port@0 {
-					reg = <0>;
-
-					hdmi_mux_0: endpoint {
-						remote-endpoint = <&ipu1_di0_hdmi>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					hdmi_mux_1: endpoint {
-						remote-endpoint = <&ipu1_di1_hdmi>;
-					};
-				};
-			};
-
 			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
 				interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts
index 64f7decf1fdc..0da906bd8df2 100644
--- a/arch/arm/boot/dts/imx6sl-warp.dts
+++ b/arch/arm/boot/dts/imx6sl-warp.dts
@@ -58,40 +58,6 @@
 		reg = <0x80000000 0x20000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb_otg1_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 0 0>;
-			enable-active-high;
-		};
-
-		reg_usb_otg2_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_otg2_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio4 2 0>;
-			enable-active-high;
-		};
-
-		reg_1p8v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
 	usdhc3_pwrseq: usdhc3_pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, 	/* WL_REG_ON */
@@ -121,14 +87,13 @@
 };
 
 &usbotg1 {
-	vbus-supply = <&reg_usb_otg1_vbus>;
-	dr_mode = "host";
+	dr_mode = "peripheral";
 	disable-over-current;
 	status = "okay";
 };
 
 &usbotg2 {
-	vbus-supply = <&reg_usb_otg2_vbus>;
+	dr_mode = "host";
 	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
new file mode 100644
index 000000000000..a8d81497edb3
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -0,0 +1,1038 @@
+/*
+ * Copyright (C) 2014-2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __DTS_IMX7D_PINFUNC_H
+#define __DTS_IMX7D_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+
+#define MX7D_PAD_EPDC_DATA00__EPDC_DATA0                          0x0034 0x02A4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD                     0x0034 0x02A4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0                        0x0034 0x02A4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA00__KPP_ROW3                            0x0034 0x02A4 0x0620 0x3 0x0
+#define MX7D_PAD_EPDC_DATA00__EIM_AD0                             0x0034 0x02A4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA00__GPIO2_IO0                           0x0034 0x02A4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_DATA0                           0x0034 0x02A4 0x0638 0x6 0x0
+#define MX7D_PAD_EPDC_DATA00__LCD_CLK                             0x0034 0x02A4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA01__EPDC_DATA1                          0x0038 0x02A8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA01__SIM1_PORT2_CLK                      0x0038 0x02A8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1                        0x0038 0x02A8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA01__KPP_COL3                            0x0038 0x02A8 0x0600 0x3 0x0
+#define MX7D_PAD_EPDC_DATA01__EIM_AD1                             0x0038 0x02A8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA01__GPIO2_IO1                           0x0038 0x02A8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_DATA1                           0x0038 0x02A8 0x063C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA01__LCD_ENABLE                          0x0038 0x02A8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA02__EPDC_DATA2                          0x003C 0x02AC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA02__SIM1_PORT2_RST_B                    0x003C 0x02AC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2                        0x003C 0x02AC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA02__KPP_ROW2                            0x003C 0x02AC 0x061C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA02__EIM_AD2                             0x003C 0x02AC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA02__GPIO2_IO2                           0x003C 0x02AC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_DATA2                           0x003C 0x02AC 0x0640 0x6 0x0
+#define MX7D_PAD_EPDC_DATA02__LCD_VSYNC                           0x003C 0x02AC 0x0698 0x7 0x0
+#define MX7D_PAD_EPDC_DATA03__EPDC_DATA3                          0x0040 0x02B0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA03__SIM1_PORT2_SVEN                     0x0040 0x02B0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3                        0x0040 0x02B0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA03__KPP_COL2                            0x0040 0x02B0 0x05FC 0x3 0x0
+#define MX7D_PAD_EPDC_DATA03__EIM_AD3                             0x0040 0x02B0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA03__GPIO2_IO3                           0x0040 0x02B0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_DATA3                           0x0040 0x02B0 0x0644 0x6 0x0
+#define MX7D_PAD_EPDC_DATA03__LCD_HSYNC                           0x0040 0x02B0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA04__EPDC_DATA4                          0x0044 0x02B4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA04__SIM1_PORT2_PD                       0x0044 0x02B4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA04__QSPI_A_DQS                          0x0044 0x02B4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA04__KPP_ROW1                            0x0044 0x02B4 0x0618 0x3 0x0
+#define MX7D_PAD_EPDC_DATA04__EIM_AD4                             0x0044 0x02B4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA04__GPIO2_IO4                           0x0044 0x02B4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA04__LCD_DATA4                           0x0044 0x02B4 0x0648 0x6 0x0
+#define MX7D_PAD_EPDC_DATA04__JTAG_FAIL                           0x0044 0x02B4 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA05__EPDC_DATA5                          0x0048 0x02B8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA05__SIM2_PORT2_TRXD                     0x0048 0x02B8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK                         0x0048 0x02B8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA05__KPP_COL1                            0x0048 0x02B8 0x05F8 0x3 0x0
+#define MX7D_PAD_EPDC_DATA05__EIM_AD5                             0x0048 0x02B8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA05__GPIO2_IO5                           0x0048 0x02B8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA05__LCD_DATA5                           0x0048 0x02B8 0x064C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA05__JTAG_ACTIVE                         0x0048 0x02B8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA06__EPDC_DATA6                          0x004C 0x02BC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA06__SIM2_PORT2_CLK                      0x004C 0x02BC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B                        0x004C 0x02BC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA06__KPP_ROW0                            0x004C 0x02BC 0x0614 0x3 0x0
+#define MX7D_PAD_EPDC_DATA06__EIM_AD6                             0x004C 0x02BC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA06__GPIO2_IO6                           0x004C 0x02BC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA06__LCD_DATA6                           0x004C 0x02BC 0x0650 0x6 0x0
+#define MX7D_PAD_EPDC_DATA06__JTAG_DE_B                           0x004C 0x02BC 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA07__EPDC_DATA7                          0x0050 0x02C0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA07__SIM2_PORT2_RST_B                    0x0050 0x02C0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B                        0x0050 0x02C0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA07__KPP_COL0                            0x0050 0x02C0 0x05F4 0x3 0x0
+#define MX7D_PAD_EPDC_DATA07__EIM_AD7                             0x0050 0x02C0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA07__GPIO2_IO7                           0x0050 0x02C0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA07__LCD_DATA7                           0x0050 0x02C0 0x0654 0x6 0x0
+#define MX7D_PAD_EPDC_DATA07__JTAG_DONE                           0x0050 0x02C0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_DATA8                          0x0054 0x02C4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA08__SIM1_PORT1_TRXD                     0x0054 0x02C4 0x06E4 0x1 0x0
+#define MX7D_PAD_EPDC_DATA08__QSPI_B_DATA0                        0x0054 0x02C4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DCE_RX                        0x0054 0x02C4 0x071C 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__UART6_DTE_TX                        0x0054 0x02C4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA08__EIM_OE                              0x0054 0x02C4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA08__GPIO2_IO8                           0x0054 0x02C4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_DATA8                           0x0054 0x02C4 0x0658 0x6 0x0
+#define MX7D_PAD_EPDC_DATA08__LCD_BUSY                            0x0054 0x02C4 0x0634 0x7 0x0
+#define MX7D_PAD_EPDC_DATA08__EPDC_SDCLK                          0x0054 0x02C4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA09__EPDC_DATA9                          0x0058 0x02C8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA09__SIM1_PORT1_CLK                      0x0058 0x02C8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA09__QSPI_B_DATA1                        0x0058 0x02C8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DCE_TX                        0x0058 0x02C8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA09__UART6_DTE_RX                        0x0058 0x02C8 0x071C 0x3 0x1
+#define MX7D_PAD_EPDC_DATA09__EIM_RW                              0x0058 0x02C8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA09__GPIO2_IO9                           0x0058 0x02C8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA9                           0x0058 0x02C8 0x065C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA09__LCD_DATA0                           0x0058 0x02C8 0x0638 0x7 0x1
+#define MX7D_PAD_EPDC_DATA09__EPDC_SDLE                           0x0058 0x02C8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA10__EPDC_DATA10                         0x005C 0x02CC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA10__SIM1_PORT1_RST_B                    0x005C 0x02CC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA10__QSPI_B_DATA2                        0x005C 0x02CC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DCE_RTS                       0x005C 0x02CC 0x0718 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__UART6_DTE_CTS                       0x005C 0x02CC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA10__EIM_CS0_B                           0x005C 0x02CC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA10__GPIO2_IO10                          0x005C 0x02CC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA10                          0x005C 0x02CC 0x0660 0x6 0x0
+#define MX7D_PAD_EPDC_DATA10__LCD_DATA9                           0x005C 0x02CC 0x065C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA10__EPDC_SDOE                           0x005C 0x02CC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA11__EPDC_DATA11                         0x0060 0x02D0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA11__SIM1_PORT1_SVEN                     0x0060 0x02D0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA11__QSPI_B_DATA3                        0x0060 0x02D0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DCE_CTS                       0x0060 0x02D0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA11__UART6_DTE_RTS                       0x0060 0x02D0 0x0718 0x3 0x1
+#define MX7D_PAD_EPDC_DATA11__EIM_BCLK                            0x0060 0x02D0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA11__GPIO2_IO11                          0x0060 0x02D0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA11                          0x0060 0x02D0 0x0664 0x6 0x0
+#define MX7D_PAD_EPDC_DATA11__LCD_DATA1                           0x0060 0x02D0 0x063C 0x7 0x1
+#define MX7D_PAD_EPDC_DATA11__EPDC_SDCE0                          0x0060 0x02D0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_DATA12                         0x0064 0x02D4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA12__SIM1_PORT1_PD                       0x0064 0x02D4 0x06E0 0x1 0x0
+#define MX7D_PAD_EPDC_DATA12__QSPI_B_DQS                          0x0064 0x02D4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DCE_RX                        0x0064 0x02D4 0x0724 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__UART7_DTE_TX                        0x0064 0x02D4 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA12__EIM_LBA_B                           0x0064 0x02D4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA12__GPIO2_IO12                          0x0064 0x02D4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA12                          0x0064 0x02D4 0x0668 0x6 0x0
+#define MX7D_PAD_EPDC_DATA12__LCD_DATA21                          0x0064 0x02D4 0x068C 0x7 0x0
+#define MX7D_PAD_EPDC_DATA12__EPDC_GDCLK                          0x0064 0x02D4 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_DATA13                         0x0068 0x02D8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA13__SIM2_PORT1_TRXD                     0x0068 0x02D8 0x06EC 0x1 0x0
+#define MX7D_PAD_EPDC_DATA13__QSPI_B_SCLK                         0x0068 0x02D8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DCE_TX                        0x0068 0x02D8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA13__UART7_DTE_RX                        0x0068 0x02D8 0x0724 0x3 0x1
+#define MX7D_PAD_EPDC_DATA13__EIM_WAIT                            0x0068 0x02D8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA13__GPIO2_IO13                          0x0068 0x02D8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_DATA13                          0x0068 0x02D8 0x066C 0x6 0x0
+#define MX7D_PAD_EPDC_DATA13__LCD_CS                              0x0068 0x02D8 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA13__EPDC_GDOE                           0x0068 0x02D8 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_DATA14                         0x006C 0x02DC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA14__SIM2_PORT1_CLK                      0x006C 0x02DC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA14__QSPI_B_SS0_B                        0x006C 0x02DC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DCE_RTS                       0x006C 0x02DC 0x0720 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__UART7_DTE_CTS                       0x006C 0x02DC 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA14__EIM_EB_B0                           0x006C 0x02DC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA14__GPIO2_IO14                          0x006C 0x02DC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA14                          0x006C 0x02DC 0x0670 0x6 0x0
+#define MX7D_PAD_EPDC_DATA14__LCD_DATA22                          0x006C 0x02DC 0x0690 0x7 0x0
+#define MX7D_PAD_EPDC_DATA14__EPDC_GDSP                           0x006C 0x02DC 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_DATA15                         0x0070 0x02E0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_DATA15__SIM2_PORT1_RST_B                    0x0070 0x02E0 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_DATA15__QSPI_B_SS1_B                        0x0070 0x02E0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DCE_CTS                       0x0070 0x02E0 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_DATA15__UART7_DTE_RTS                       0x0070 0x02E0 0x0720 0x3 0x1
+#define MX7D_PAD_EPDC_DATA15__EIM_CS1_B                           0x0070 0x02E0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_DATA15__GPIO2_IO15                          0x0070 0x02E0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_DATA15                          0x0070 0x02E0 0x0674 0x6 0x0
+#define MX7D_PAD_EPDC_DATA15__LCD_WR_RWN                          0x0070 0x02E0 0x0000 0x7 0x0
+#define MX7D_PAD_EPDC_DATA15__EPDC_PWR_COM                        0x0070 0x02E0 0x0000 0x8 0x0
+#define MX7D_PAD_EPDC_SDCLK__EPDC_SDCLK                           0x0074 0x02E4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCLK__SIM2_PORT2_SVEN                      0x0074 0x02E4 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0                      0x0074 0x02E4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCLK__KPP_ROW4                             0x0074 0x02E4 0x0624 0x3 0x0
+#define MX7D_PAD_EPDC_SDCLK__EIM_AD10                             0x0074 0x02E4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCLK__GPIO2_IO16                           0x0074 0x02E4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_CLK                              0x0074 0x02E4 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_SDCLK__LCD_DATA20                           0x0074 0x02E4 0x0688 0x7 0x0
+#define MX7D_PAD_EPDC_SDLE__EPDC_SDLE                             0x0078 0x02E8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDLE__SIM2_PORT2_PD                         0x0078 0x02E8 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1                       0x0078 0x02E8 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDLE__KPP_COL4                              0x0078 0x02E8 0x0604 0x3 0x0
+#define MX7D_PAD_EPDC_SDLE__EIM_AD11                              0x0078 0x02E8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDLE__GPIO2_IO17                            0x0078 0x02E8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA16                            0x0078 0x02E8 0x0678 0x6 0x0
+#define MX7D_PAD_EPDC_SDLE__LCD_DATA8                             0x0078 0x02E8 0x0658 0x7 0x1
+#define MX7D_PAD_EPDC_SDOE__EPDC_SDOE                             0x007C 0x02EC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDOE__FLEXTIMER1_CH0                        0x007C 0x02EC 0x0584 0x1 0x0
+#define MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2                       0x007C 0x02EC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDOE__KPP_COL5                              0x007C 0x02EC 0x0608 0x3 0x1
+#define MX7D_PAD_EPDC_SDOE__EIM_AD12                              0x007C 0x02EC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDOE__GPIO2_IO18                            0x007C 0x02EC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA17                            0x007C 0x02EC 0x067C 0x6 0x0
+#define MX7D_PAD_EPDC_SDOE__LCD_DATA23                            0x007C 0x02EC 0x0694 0x7 0x0
+#define MX7D_PAD_EPDC_SDSHR__EPDC_SDSHR                           0x0080 0x02F0 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDSHR__FLEXTIMER1_CH1                       0x0080 0x02F0 0x0588 0x1 0x0
+#define MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3                      0x0080 0x02F0 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDSHR__KPP_ROW5                             0x0080 0x02F0 0x0628 0x3 0x1
+#define MX7D_PAD_EPDC_SDSHR__EIM_AD13                             0x0080 0x02F0 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDSHR__GPIO2_IO19                           0x0080 0x02F0 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA18                           0x0080 0x02F0 0x0680 0x6 0x0
+#define MX7D_PAD_EPDC_SDSHR__LCD_DATA10                           0x0080 0x02F0 0x0660 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE0__EPDC_SDCE0                           0x0084 0x02F4 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE0__FLEXTIMER1_CH2                       0x0084 0x02F4 0x058C 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL                   0x0084 0x02F4 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE0__EIM_AD14                             0x0084 0x02F4 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE0__GPIO2_IO20                           0x0084 0x02F4 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA19                           0x0084 0x02F4 0x0684 0x6 0x0
+#define MX7D_PAD_EPDC_SDCE0__LCD_DATA5                            0x0084 0x02F4 0x064C 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE1__EPDC_SDCE1                           0x0088 0x02F8 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE1__FLEXTIMER1_CH3                       0x0088 0x02F8 0x0590 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC                      0x0088 0x02F8 0x0578 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE1__ENET2_RX_ER                          0x0088 0x02F8 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_SDCE1__EIM_AD15                             0x0088 0x02F8 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE1__GPIO2_IO21                           0x0088 0x02F8 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA20                           0x0088 0x02F8 0x0688 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE1__LCD_DATA4                            0x0088 0x02F8 0x0648 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE2__EPDC_SDCE2                           0x008C 0x02FC 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE2__SIM2_PORT1_SVEN                      0x008C 0x02FC 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0                      0x008C 0x02FC 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE2__KPP_COL6                             0x008C 0x02FC 0x060C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE2__EIM_ADDR16                           0x008C 0x02FC 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE2__GPIO2_IO22                           0x008C 0x02FC 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA21                           0x008C 0x02FC 0x068C 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE2__LCD_DATA3                            0x008C 0x02FC 0x0644 0x7 0x1
+#define MX7D_PAD_EPDC_SDCE3__EPDC_SDCE3                           0x0090 0x0300 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_SDCE3__SIM2_PORT1_PD                        0x0090 0x0300 0x06E8 0x1 0x0
+#define MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1                      0x0090 0x0300 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_SDCE3__KPP_ROW6                             0x0090 0x0300 0x062C 0x3 0x1
+#define MX7D_PAD_EPDC_SDCE3__EIM_ADDR17                           0x0090 0x0300 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_SDCE3__GPIO2_IO23                           0x0090 0x0300 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA22                           0x0090 0x0300 0x0690 0x6 0x1
+#define MX7D_PAD_EPDC_SDCE3__LCD_DATA2                            0x0090 0x0300 0x0640 0x7 0x1
+#define MX7D_PAD_EPDC_GDCLK__EPDC_GDCLK                           0x0094 0x0304 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDCLK__FLEXTIMER2_CH0                       0x0094 0x0304 0x05AC 0x1 0x0
+#define MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2                      0x0094 0x0304 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDCLK__KPP_COL7                             0x0094 0x0304 0x0610 0x3 0x0
+#define MX7D_PAD_EPDC_GDCLK__EIM_ADDR18                           0x0094 0x0304 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDCLK__GPIO2_IO24                           0x0094 0x0304 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA23                           0x0094 0x0304 0x0694 0x6 0x1
+#define MX7D_PAD_EPDC_GDCLK__LCD_DATA16                           0x0094 0x0304 0x0678 0x7 0x1
+#define MX7D_PAD_EPDC_GDOE__EPDC_GDOE                             0x0098 0x0308 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDOE__FLEXTIMER2_CH1                        0x0098 0x0308 0x05B0 0x1 0x0
+#define MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3                       0x0098 0x0308 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDOE__KPP_ROW7                              0x0098 0x0308 0x0630 0x3 0x0
+#define MX7D_PAD_EPDC_GDOE__EIM_ADDR19                            0x0098 0x0308 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDOE__GPIO2_IO25                            0x0098 0x0308 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_WR_RWN                            0x0098 0x0308 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDOE__LCD_DATA18                            0x0098 0x0308 0x0680 0x7 0x1
+#define MX7D_PAD_EPDC_GDRL__EPDC_GDRL                             0x009C 0x030C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDRL__FLEXTIMER2_CH2                        0x009C 0x030C 0x05B4 0x1 0x0
+#define MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL                    0x009C 0x030C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDRL__EIM_ADDR20                            0x009C 0x030C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDRL__GPIO2_IO26                            0x009C 0x030C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_RD_E                              0x009C 0x030C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_GDRL__LCD_DATA19                            0x009C 0x030C 0x0684 0x7 0x1
+#define MX7D_PAD_EPDC_GDSP__EPDC_GDSP                             0x00A0 0x0310 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_GDSP__FLEXTIMER2_CH3                        0x00A0 0x0310 0x05B8 0x1 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC                       0x00A0 0x0310 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_GDSP__ENET2_TX_ER                           0x00A0 0x0310 0x0000 0x3 0x0
+#define MX7D_PAD_EPDC_GDSP__EIM_ADDR21                            0x00A0 0x0310 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_GDSP__GPIO2_IO27                            0x00A0 0x0310 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_GDSP__LCD_BUSY                              0x00A0 0x0310 0x0634 0x6 0x1
+#define MX7D_PAD_EPDC_GDSP__LCD_DATA17                            0x00A0 0x0310 0x067C 0x7 0x1
+#define MX7D_PAD_EPDC_BDR0__EPDC_BDR0                             0x00A4 0x0314 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR0__ENET2_TX_CLK                          0x00A4 0x0314 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_BDR0__CCM_ENET_REF_CLK2                     0x00A4 0x0314 0x0570 0x3 0x1
+#define MX7D_PAD_EPDC_BDR0__EIM_ADDR22                            0x00A4 0x0314 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR0__GPIO2_IO28                            0x00A4 0x0314 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_CS                                0x00A4 0x0314 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR0__LCD_DATA7                             0x00A4 0x0314 0x0654 0x7 0x1
+#define MX7D_PAD_EPDC_BDR1__EPDC_BDR1                             0x00A8 0x0318 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_BDR1__EPDC_SDCLKN                           0x00A8 0x0318 0x0000 0x1 0x0
+#define MX7D_PAD_EPDC_BDR1__ENET2_RX_CLK                          0x00A8 0x0318 0x0578 0x2 0x1
+#define MX7D_PAD_EPDC_BDR1__EIM_AD8                               0x00A8 0x0318 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_BDR1__GPIO2_IO29                            0x00A8 0x0318 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_ENABLE                            0x00A8 0x0318 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_BDR1__LCD_DATA6                             0x00A8 0x0318 0x0650 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_COM__EPDC_PWR_COM                       0x00AC 0x031C 0x0000 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_COM__FLEXTIMER2_PHA                     0x00AC 0x031C 0x05CC 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_COM__ENET2_CRS                          0x00AC 0x031C 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_COM__EIM_AD9                            0x00AC 0x031C 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30                         0x00AC 0x031C 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_HSYNC                          0x00AC 0x031C 0x0000 0x6 0x0
+#define MX7D_PAD_EPDC_PWR_COM__LCD_DATA11                         0x00AC 0x031C 0x0664 0x7 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT                     0x00B0 0x0320 0x0580 0x0 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__FLEXTIMER2_PHB                    0x00B0 0x0320 0x05D0 0x1 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__ENET2_COL                         0x00B0 0x0320 0x0000 0x2 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__EIM_EB_B1                         0x00B0 0x0320 0x0000 0x4 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31                        0x00B0 0x0320 0x0000 0x5 0x0
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_VSYNC                         0x00B0 0x0320 0x0698 0x6 0x1
+#define MX7D_PAD_EPDC_PWR_STAT__LCD_DATA12                        0x00B0 0x0320 0x0668 0x7 0x1
+#define MX7D_PAD_LCD_CLK__LCD_CLK                                 0x00B4 0x0324 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_CLK__ECSPI4_MISO                             0x00B4 0x0324 0x0558 0x1 0x0
+#define MX7D_PAD_LCD_CLK__ENET1_1588_EVENT2_IN                    0x00B4 0x0324 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_CLK__CSI_DATA16                              0x00B4 0x0324 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DCE_RX                            0x00B4 0x0324 0x06FC 0x4 0x0
+#define MX7D_PAD_LCD_CLK__UART2_DTE_TX                            0x00B4 0x0324 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_CLK__GPIO3_IO0                               0x00B4 0x0324 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_ENABLE__LCD_ENABLE                           0x00B8 0x0328 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_ENABLE__ECSPI4_MOSI                          0x00B8 0x0328 0x055C 0x1 0x0
+#define MX7D_PAD_LCD_ENABLE__ENET1_1588_EVENT3_IN                 0x00B8 0x0328 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_ENABLE__CSI_DATA17                           0x00B8 0x0328 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DCE_TX                         0x00B8 0x0328 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_ENABLE__UART2_DTE_RX                         0x00B8 0x0328 0x06FC 0x4 0x1
+#define MX7D_PAD_LCD_ENABLE__GPIO3_IO1                            0x00B8 0x0328 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_HSYNC__LCD_HSYNC                             0x00BC 0x032C 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_HSYNC__ECSPI4_SCLK                           0x00BC 0x032C 0x0554 0x1 0x0
+#define MX7D_PAD_LCD_HSYNC__ENET2_1588_EVENT2_IN                  0x00BC 0x032C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_HSYNC__CSI_DATA18                            0x00BC 0x032C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DCE_RTS                         0x00BC 0x032C 0x06F8 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__UART2_DTE_CTS                         0x00BC 0x032C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_HSYNC__GPIO3_IO2                             0x00BC 0x032C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_VSYNC__LCD_VSYNC                             0x00C0 0x0330 0x0698 0x0 0x2
+#define MX7D_PAD_LCD_VSYNC__ECSPI4_SS0                            0x00C0 0x0330 0x0560 0x1 0x0
+#define MX7D_PAD_LCD_VSYNC__ENET2_1588_EVENT3_IN                  0x00C0 0x0330 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_VSYNC__CSI_DATA19                            0x00C0 0x0330 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DCE_CTS                         0x00C0 0x0330 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_VSYNC__UART2_DTE_RTS                         0x00C0 0x0330 0x06F8 0x4 0x1
+#define MX7D_PAD_LCD_VSYNC__GPIO3_IO3                             0x00C0 0x0330 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_RESET__LCD_RESET                             0x00C4 0x0334 0x0000 0x0 0x0
+#define MX7D_PAD_LCD_RESET__GPT1_COMPARE1                         0x00C4 0x0334 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_RESET__ARM_PLATFORM_EVENTI                   0x00C4 0x0334 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_RESET__CSI_FIELD                             0x00C4 0x0334 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_RESET__EIM_DTACK_B                           0x00C4 0x0334 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_RESET__GPIO3_IO4                             0x00C4 0x0334 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__LCD_DATA0                            0x00C8 0x0338 0x0638 0x0 0x2
+#define MX7D_PAD_LCD_DATA00__GPT1_COMPARE2                        0x00C8 0x0338 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA00__CSI_DATA20                           0x00C8 0x0338 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA00__EIM_DATA0                            0x00C8 0x0338 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA00__GPIO3_IO5                            0x00C8 0x0338 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA00__SRC_BOOT_CFG0                        0x00C8 0x0338 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA01__LCD_DATA1                            0x00CC 0x033C 0x063C 0x0 0x2
+#define MX7D_PAD_LCD_DATA01__GPT1_COMPARE3                        0x00CC 0x033C 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA01__CSI_DATA21                           0x00CC 0x033C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA01__EIM_DATA1                            0x00CC 0x033C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA01__GPIO3_IO6                            0x00CC 0x033C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA01__SRC_BOOT_CFG1                        0x00CC 0x033C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA02__LCD_DATA2                            0x00D0 0x0340 0x0640 0x0 0x2
+#define MX7D_PAD_LCD_DATA02__GPT1_CLK                             0x00D0 0x0340 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA02__CSI_DATA22                           0x00D0 0x0340 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA02__EIM_DATA2                            0x00D0 0x0340 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA02__GPIO3_IO7                            0x00D0 0x0340 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA02__SRC_BOOT_CFG2                        0x00D0 0x0340 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA03__LCD_DATA3                            0x00D4 0x0344 0x0644 0x0 0x2
+#define MX7D_PAD_LCD_DATA03__GPT1_CAPTURE1                        0x00D4 0x0344 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA03__CSI_DATA23                           0x00D4 0x0344 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA03__EIM_DATA3                            0x00D4 0x0344 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA03__GPIO3_IO8                            0x00D4 0x0344 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA03__SRC_BOOT_CFG3                        0x00D4 0x0344 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA04__LCD_DATA4                            0x00D8 0x0348 0x0648 0x0 0x2
+#define MX7D_PAD_LCD_DATA04__GPT1_CAPTURE2                        0x00D8 0x0348 0x0000 0x1 0x0
+#define MX7D_PAD_LCD_DATA04__CSI_VSYNC                            0x00D8 0x0348 0x0520 0x3 0x0
+#define MX7D_PAD_LCD_DATA04__EIM_DATA4                            0x00D8 0x0348 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA04__GPIO3_IO9                            0x00D8 0x0348 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA04__SRC_BOOT_CFG4                        0x00D8 0x0348 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA05__LCD_DATA5                            0x00DC 0x034C 0x064C 0x0 0x2
+#define MX7D_PAD_LCD_DATA05__CSI_HSYNC                            0x00DC 0x034C 0x0518 0x3 0x0
+#define MX7D_PAD_LCD_DATA05__EIM_DATA5                            0x00DC 0x034C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA05__GPIO3_IO10                           0x00DC 0x034C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA05__SRC_BOOT_CFG5                        0x00DC 0x034C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA06__LCD_DATA6                            0x00E0 0x0350 0x0650 0x0 0x2
+#define MX7D_PAD_LCD_DATA06__CSI_PIXCLK                           0x00E0 0x0350 0x051C 0x3 0x0
+#define MX7D_PAD_LCD_DATA06__EIM_DATA6                            0x00E0 0x0350 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA06__GPIO3_IO11                           0x00E0 0x0350 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA06__SRC_BOOT_CFG6                        0x00E0 0x0350 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA07__LCD_DATA7                            0x00E4 0x0354 0x0654 0x0 0x2
+#define MX7D_PAD_LCD_DATA07__CSI_MCLK                             0x00E4 0x0354 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA07__EIM_DATA7                            0x00E4 0x0354 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA07__GPIO3_IO12                           0x00E4 0x0354 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA07__SRC_BOOT_CFG7                        0x00E4 0x0354 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA08__LCD_DATA8                            0x00E8 0x0358 0x0658 0x0 0x2
+#define MX7D_PAD_LCD_DATA08__CSI_DATA9                            0x00E8 0x0358 0x0514 0x3 0x0
+#define MX7D_PAD_LCD_DATA08__EIM_DATA8                            0x00E8 0x0358 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA08__GPIO3_IO13                           0x00E8 0x0358 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA08__SRC_BOOT_CFG8                        0x00E8 0x0358 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA09__LCD_DATA9                            0x00EC 0x035C 0x065C 0x0 0x2
+#define MX7D_PAD_LCD_DATA09__CSI_DATA8                            0x00EC 0x035C 0x0510 0x3 0x0
+#define MX7D_PAD_LCD_DATA09__EIM_DATA9                            0x00EC 0x035C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA09__GPIO3_IO14                           0x00EC 0x035C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA09__SRC_BOOT_CFG9                        0x00EC 0x035C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA10__LCD_DATA10                           0x00F0 0x0360 0x0660 0x0 0x2
+#define MX7D_PAD_LCD_DATA10__CSI_DATA7                            0x00F0 0x0360 0x050C 0x3 0x0
+#define MX7D_PAD_LCD_DATA10__EIM_DATA10                           0x00F0 0x0360 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA10__GPIO3_IO15                           0x00F0 0x0360 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA10__SRC_BOOT_CFG10                       0x00F0 0x0360 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA11__LCD_DATA11                           0x00F4 0x0364 0x0664 0x0 0x2
+#define MX7D_PAD_LCD_DATA11__CSI_DATA6                            0x00F4 0x0364 0x0508 0x3 0x0
+#define MX7D_PAD_LCD_DATA11__EIM_DATA11                           0x00F4 0x0364 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA11__GPIO3_IO16                           0x00F4 0x0364 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA11__SRC_BOOT_CFG11                       0x00F4 0x0364 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA12__LCD_DATA12                           0x00F8 0x0368 0x0668 0x0 0x2
+#define MX7D_PAD_LCD_DATA12__CSI_DATA5                            0x00F8 0x0368 0x0504 0x3 0x0
+#define MX7D_PAD_LCD_DATA12__EIM_DATA12                           0x00F8 0x0368 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA12__GPIO3_IO17                           0x00F8 0x0368 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA12__SRC_BOOT_CFG12                       0x00F8 0x0368 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA13__LCD_DATA13                           0x00FC 0x036C 0x066C 0x0 0x1
+#define MX7D_PAD_LCD_DATA13__CSI_DATA4                            0x00FC 0x036C 0x0500 0x3 0x0
+#define MX7D_PAD_LCD_DATA13__EIM_DATA13                           0x00FC 0x036C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA13__GPIO3_IO18                           0x00FC 0x036C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA13__SRC_BOOT_CFG13                       0x00FC 0x036C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA14__LCD_DATA14                           0x0100 0x0370 0x0670 0x0 0x1
+#define MX7D_PAD_LCD_DATA14__CSI_DATA3                            0x0100 0x0370 0x04FC 0x3 0x0
+#define MX7D_PAD_LCD_DATA14__EIM_DATA14                           0x0100 0x0370 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA14__GPIO3_IO19                           0x0100 0x0370 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA14__SRC_BOOT_CFG14                       0x0100 0x0370 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA15__LCD_DATA15                           0x0104 0x0374 0x0674 0x0 0x1
+#define MX7D_PAD_LCD_DATA15__CSI_DATA2                            0x0104 0x0374 0x04F8 0x3 0x0
+#define MX7D_PAD_LCD_DATA15__EIM_DATA15                           0x0104 0x0374 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA15__GPIO3_IO20                           0x0104 0x0374 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA15__SRC_BOOT_CFG15                       0x0104 0x0374 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA16__LCD_DATA16                           0x0108 0x0378 0x0678 0x0 0x2
+#define MX7D_PAD_LCD_DATA16__FLEXTIMER1_CH4                       0x0108 0x0378 0x0594 0x1 0x0
+#define MX7D_PAD_LCD_DATA16__CSI_DATA1                            0x0108 0x0378 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA16__EIM_CRE                              0x0108 0x0378 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA16__GPIO3_IO21                           0x0108 0x0378 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA16__SRC_BOOT_CFG16                       0x0108 0x0378 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA17__LCD_DATA17                           0x010C 0x037C 0x067C 0x0 0x2
+#define MX7D_PAD_LCD_DATA17__FLEXTIMER1_CH5                       0x010C 0x037C 0x0598 0x1 0x0
+#define MX7D_PAD_LCD_DATA17__CSI_DATA0                            0x010C 0x037C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA17__EIM_ACLK_FREERUN                     0x010C 0x037C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA17__GPIO3_IO22                           0x010C 0x037C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA17__SRC_BOOT_CFG17                       0x010C 0x037C 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA18__LCD_DATA18                           0x0110 0x0380 0x0680 0x0 0x2
+#define MX7D_PAD_LCD_DATA18__FLEXTIMER1_CH6                       0x0110 0x0380 0x059C 0x1 0x0
+#define MX7D_PAD_LCD_DATA18__ARM_PLATFORM_EVENTO                  0x0110 0x0380 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA18__CSI_DATA15                           0x0110 0x0380 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA18__EIM_CS2_B                            0x0110 0x0380 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA18__GPIO3_IO23                           0x0110 0x0380 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA18__SRC_BOOT_CFG18                       0x0110 0x0380 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__EIM_CS3_B                            0x0114 0x0384 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA19__GPIO3_IO24                           0x0114 0x0384 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA19__SRC_BOOT_CFG19                       0x0114 0x0384 0x0000 0x6 0x0
+#define MX7D_PAD_LCD_DATA19__LCD_DATA19                           0x0114 0x0384 0x0684 0x0 0x2
+#define MX7D_PAD_LCD_DATA19__FLEXTIMER1_CH7                       0x0114 0x0384 0x05A0 0x1 0x0
+#define MX7D_PAD_LCD_DATA19__CSI_DATA14                           0x0114 0x0384 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA20__EIM_ADDR23                           0x0118 0x0388 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA20__GPIO3_IO25                           0x0118 0x0388 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA20__I2C3_SCL                             0x0118 0x0388 0x05E4 0x6 0x1
+#define MX7D_PAD_LCD_DATA20__LCD_DATA20                           0x0118 0x0388 0x0688 0x0 0x2
+#define MX7D_PAD_LCD_DATA20__FLEXTIMER2_CH4                       0x0118 0x0388 0x05BC 0x1 0x0
+#define MX7D_PAD_LCD_DATA20__ENET1_1588_EVENT2_OUT                0x0118 0x0388 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA20__CSI_DATA13                           0x0118 0x0388 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__LCD_DATA21                           0x011C 0x038C 0x068C 0x0 0x2
+#define MX7D_PAD_LCD_DATA21__FLEXTIMER2_CH5                       0x011C 0x038C 0x05C0 0x1 0x0
+#define MX7D_PAD_LCD_DATA21__ENET1_1588_EVENT3_OUT                0x011C 0x038C 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA21__CSI_DATA12                           0x011C 0x038C 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA21__EIM_ADDR24                           0x011C 0x038C 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA21__GPIO3_IO26                           0x011C 0x038C 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA21__I2C3_SDA                             0x011C 0x038C 0x05E8 0x6 0x1
+#define MX7D_PAD_LCD_DATA22__LCD_DATA22                           0x0120 0x0390 0x0690 0x0 0x2
+#define MX7D_PAD_LCD_DATA22__FLEXTIMER2_CH6                       0x0120 0x0390 0x05C4 0x1 0x0
+#define MX7D_PAD_LCD_DATA22__ENET2_1588_EVENT2_OUT                0x0120 0x0390 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA22__CSI_DATA11                           0x0120 0x0390 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA22__EIM_ADDR25                           0x0120 0x0390 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA22__GPIO3_IO27                           0x0120 0x0390 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA22__I2C4_SCL                             0x0120 0x0390 0x05EC 0x6 0x1
+#define MX7D_PAD_LCD_DATA23__LCD_DATA23                           0x0124 0x0394 0x0694 0x0 0x2
+#define MX7D_PAD_LCD_DATA23__FLEXTIMER2_CH7                       0x0124 0x0394 0x05C8 0x1 0x0
+#define MX7D_PAD_LCD_DATA23__ENET2_1588_EVENT3_OUT                0x0124 0x0394 0x0000 0x2 0x0
+#define MX7D_PAD_LCD_DATA23__CSI_DATA10                           0x0124 0x0394 0x0000 0x3 0x0
+#define MX7D_PAD_LCD_DATA23__EIM_ADDR26                           0x0124 0x0394 0x0000 0x4 0x0
+#define MX7D_PAD_LCD_DATA23__GPIO3_IO28                           0x0124 0x0394 0x0000 0x5 0x0
+#define MX7D_PAD_LCD_DATA23__I2C4_SDA                             0x0124 0x0394 0x05F0 0x6 0x1
+#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX                      0x0128 0x0398 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_RX_DATA__I2C1_SCL                          0x0128 0x0398 0x05D4 0x1 0x0
+#define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY                    0x0128 0x0398 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_RX_DATA__ECSPI1_SS1                        0x0128 0x0398 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET2_1588_EVENT0_IN              0x0128 0x0398 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_RX_DATA__GPIO4_IO0                         0x0128 0x0398 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_RX_DATA__ENET1_MDIO                        0x0128 0x0398 0x0000 0x6 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX                      0x012C 0x039C 0x0000 0x0 0x0
+#define MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX                      0x012C 0x039C 0x06F4 0x0 0x1
+#define MX7D_PAD_UART1_TX_DATA__I2C1_SDA                          0x012C 0x039C 0x05D8 0x1 0x0
+#define MX7D_PAD_UART1_TX_DATA__SAI3_MCLK                         0x012C 0x039C 0x0000 0x2 0x0
+#define MX7D_PAD_UART1_TX_DATA__ECSPI1_SS2                        0x012C 0x039C 0x0000 0x3 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT             0x012C 0x039C 0x0000 0x4 0x0
+#define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1                         0x012C 0x039C 0x0000 0x5 0x0
+#define MX7D_PAD_UART1_TX_DATA__ENET1_MDC                         0x012C 0x039C 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX                      0x0130 0x03A0 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_RX_DATA__I2C2_SCL                          0x0130 0x03A0 0x05DC 0x1 0x0
+#define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK                      0x0130 0x03A0 0x0000 0x2 0x0
+#define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                        0x0130 0x03A0 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN              0x0130 0x03A0 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
+#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0                     0x0134 0x03A4 0x06C8 0x2 0x0
+#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY                        0x0134 0x03A4 0x0000 0x3 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_1588_EVENT1_OUT             0x0134 0x03A4 0x0000 0x4 0x0
+#define MX7D_PAD_UART2_TX_DATA__GPIO4_IO3                         0x0134 0x03A4 0x0000 0x5 0x0
+#define MX7D_PAD_UART2_TX_DATA__ENET2_MDC                         0x0134 0x03A4 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX                      0x0138 0x03A8 0x0704 0x0 0x2
+#define MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX                      0x0138 0x03A8 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RX_DATA__USB_OTG1_OC                       0x0138 0x03A8 0x072C 0x1 0x0
+#define MX7D_PAD_UART3_RX_DATA__SAI3_RX_SYNC                      0x0138 0x03A8 0x06CC 0x2 0x0
+#define MX7D_PAD_UART3_RX_DATA__ECSPI1_MISO                       0x0138 0x03A8 0x0528 0x3 0x0
+#define MX7D_PAD_UART3_RX_DATA__ENET1_1588_EVENT0_IN              0x0138 0x03A8 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RX_DATA__GPIO4_IO4                         0x0138 0x03A8 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RX_DATA__SD1_LCTL                          0x0138 0x03A8 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX                      0x013C 0x03AC 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX                      0x013C 0x03AC 0x0704 0x0 0x3
+#define MX7D_PAD_UART3_TX_DATA__USB_OTG1_PWR                      0x013C 0x03AC 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_TX_DATA__SAI3_TX_BCLK                      0x013C 0x03AC 0x06D0 0x2 0x0
+#define MX7D_PAD_UART3_TX_DATA__ECSPI1_MOSI                       0x013C 0x03AC 0x052C 0x3 0x0
+#define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT             0x013C 0x03AC 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5                         0x013C 0x03AC 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_TX_DATA__SD2_LCTL                          0x013C 0x03AC 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS                       0x0140 0x03B0 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC                         0x0140 0x03B0 0x0728 0x1 0x0
+#define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0                       0x0140 0x03B0 0x0000 0x2 0x0
+#define MX7D_PAD_UART3_RTS_B__ECSPI1_SCLK                         0x0140 0x03B0 0x0000 0x3 0x0
+#define MX7D_PAD_UART3_RTS_B__ENET1_1588_EVENT1_IN                0x0140 0x03B0 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_RTS_B__GPIO4_IO6                           0x0140 0x03B0 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_RTS_B__SD3_LCTL                            0x0140 0x03B0 0x0000 0x6 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DCE_CTS                       0x0144 0x03B4 0x0000 0x0 0x0
+#define MX7D_PAD_UART3_CTS_B__UART3_DTE_RTS                       0x0144 0x03B4 0x0700 0x0 0x3
+#define MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR                        0x0144 0x03B4 0x0000 0x1 0x0
+#define MX7D_PAD_UART3_CTS_B__SAI3_TX_SYNC                        0x0144 0x03B4 0x06D4 0x2 0x0
+#define MX7D_PAD_UART3_CTS_B__ECSPI1_SS0                          0x0144 0x03B4 0x0530 0x3 0x0
+#define MX7D_PAD_UART3_CTS_B__ENET1_1588_EVENT1_OUT               0x0144 0x03B4 0x0000 0x4 0x0
+#define MX7D_PAD_UART3_CTS_B__GPIO4_IO7                           0x0144 0x03B4 0x0000 0x5 0x0
+#define MX7D_PAD_UART3_CTS_B__SD1_VSELECT                         0x0144 0x03B4 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SCL__I2C1_SCL                               0x0148 0x03B8 0x05D4 0x0 0x1
+#define MX7D_PAD_I2C1_SCL__UART4_DCE_CTS                          0x0148 0x03B8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__UART4_DTE_RTS                          0x0148 0x03B8 0x0708 0x1 0x0
+#define MX7D_PAD_I2C1_SCL__FLEXCAN1_RX                            0x0148 0x03B8 0x04DC 0x2 0x1
+#define MX7D_PAD_I2C1_SCL__ECSPI3_MISO                            0x0148 0x03B8 0x0548 0x3 0x0
+#define MX7D_PAD_I2C1_SCL__GPIO4_IO8                              0x0148 0x03B8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SCL__SD2_VSELECT                            0x0148 0x03B8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C1_SDA__I2C1_SDA                               0x014C 0x03BC 0x05D8 0x0 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DCE_RTS                          0x014C 0x03BC 0x0708 0x1 0x1
+#define MX7D_PAD_I2C1_SDA__UART4_DTE_CTS                          0x014C 0x03BC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C1_SDA__FLEXCAN1_TX                            0x014C 0x03BC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C1_SDA__ECSPI3_MOSI                            0x014C 0x03BC 0x054C 0x3 0x0
+#define MX7D_PAD_I2C1_SDA__CCM_ENET_REF_CLK1                      0x014C 0x03BC 0x0564 0x4 0x1
+#define MX7D_PAD_I2C1_SDA__GPIO4_IO9                              0x014C 0x03BC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C1_SDA__SD3_VSELECT                            0x014C 0x03BC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C2_SCL__I2C2_SCL                               0x0150 0x03C0 0x05DC 0x0 0x1
+#define MX7D_PAD_I2C2_SCL__UART4_DCE_RX                           0x0150 0x03C0 0x070C 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__UART4_DTE_TX                           0x0150 0x03C0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SCL__WDOG3_WDOG_B                           0x0150 0x03C0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SCL__ECSPI3_SCLK                            0x0150 0x03C0 0x0544 0x3 0x0
+#define MX7D_PAD_I2C2_SCL__CCM_ENET_REF_CLK2                      0x0150 0x03C0 0x0570 0x4 0x2
+#define MX7D_PAD_I2C2_SCL__GPIO4_IO10                             0x0150 0x03C0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SCL__SD3_CD_B                               0x0150 0x03C0 0x0738 0x6 0x1
+#define MX7D_PAD_I2C2_SDA__I2C2_SDA                               0x0154 0x03C4 0x05E0 0x0 0x1
+#define MX7D_PAD_I2C2_SDA__UART4_DCE_TX                           0x0154 0x03C4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C2_SDA__UART4_DTE_RX                           0x0154 0x03C4 0x070C 0x1 0x1
+#define MX7D_PAD_I2C2_SDA__WDOG3_WDOG_RST_B_DEB                   0x0154 0x03C4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C2_SDA__ECSPI3_SS0                             0x0154 0x03C4 0x0550 0x3 0x0
+#define MX7D_PAD_I2C2_SDA__CCM_ENET_REF_CLK3                      0x0154 0x03C4 0x0000 0x4 0x0
+#define MX7D_PAD_I2C2_SDA__GPIO4_IO11                             0x0154 0x03C4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C2_SDA__SD3_WP                                 0x0154 0x03C4 0x073C 0x6 0x1
+#define MX7D_PAD_I2C3_SCL__I2C3_SCL                               0x0158 0x03C8 0x05E4 0x0 0x2
+#define MX7D_PAD_I2C3_SCL__UART5_DCE_CTS                          0x0158 0x03C8 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__UART5_DTE_RTS                          0x0158 0x03C8 0x0710 0x1 0x0
+#define MX7D_PAD_I2C3_SCL__FLEXCAN2_RX                            0x0158 0x03C8 0x04E0 0x2 0x1
+#define MX7D_PAD_I2C3_SCL__CSI_VSYNC                              0x0158 0x03C8 0x0520 0x3 0x1
+#define MX7D_PAD_I2C3_SCL__SDMA_EXT_EVENT0                        0x0158 0x03C8 0x06D8 0x4 0x1
+#define MX7D_PAD_I2C3_SCL__GPIO4_IO12                             0x0158 0x03C8 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SCL__EPDC_BDR0                              0x0158 0x03C8 0x0000 0x6 0x0
+#define MX7D_PAD_I2C3_SDA__I2C3_SDA                               0x015C 0x03CC 0x05E8 0x0 0x2
+#define MX7D_PAD_I2C3_SDA__UART5_DCE_RTS                          0x015C 0x03CC 0x0710 0x1 0x1
+#define MX7D_PAD_I2C3_SDA__UART5_DTE_CTS                          0x015C 0x03CC 0x0000 0x1 0x0
+#define MX7D_PAD_I2C3_SDA__FLEXCAN2_TX                            0x015C 0x03CC 0x0000 0x2 0x0
+#define MX7D_PAD_I2C3_SDA__CSI_HSYNC                              0x015C 0x03CC 0x0518 0x3 0x1
+#define MX7D_PAD_I2C3_SDA__SDMA_EXT_EVENT1                        0x015C 0x03CC 0x06DC 0x4 0x1
+#define MX7D_PAD_I2C3_SDA__GPIO4_IO13                             0x015C 0x03CC 0x0000 0x5 0x0
+#define MX7D_PAD_I2C3_SDA__EPDC_BDR1                              0x015C 0x03CC 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SCL__I2C4_SCL                               0x0160 0x03D0 0x05EC 0x0 0x2
+#define MX7D_PAD_I2C4_SCL__UART5_DCE_RX                           0x0160 0x03D0 0x0714 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__UART5_DTE_TX                           0x0160 0x03D0 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SCL__WDOG4_WDOG_B                           0x0160 0x03D0 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SCL__CSI_PIXCLK                             0x0160 0x03D0 0x051C 0x3 0x1
+#define MX7D_PAD_I2C4_SCL__USB_OTG1_ID                            0x0160 0x03D0 0x0734 0x4 0x1
+#define MX7D_PAD_I2C4_SCL__GPIO4_IO14                             0x0160 0x03D0 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SCL__EPDC_VCOM0                             0x0160 0x03D0 0x0000 0x6 0x0
+#define MX7D_PAD_I2C4_SDA__I2C4_SDA                               0x0164 0x03D4 0x05F0 0x0 0x2
+#define MX7D_PAD_I2C4_SDA__UART5_DCE_TX                           0x0164 0x03D4 0x0000 0x1 0x0
+#define MX7D_PAD_I2C4_SDA__UART5_DTE_RX                           0x0164 0x03D4 0x0714 0x1 0x1
+#define MX7D_PAD_I2C4_SDA__WDOG4_WDOG_RST_B_DEB                   0x0164 0x03D4 0x0000 0x2 0x0
+#define MX7D_PAD_I2C4_SDA__CSI_MCLK                               0x0164 0x03D4 0x0000 0x3 0x0
+#define MX7D_PAD_I2C4_SDA__USB_OTG2_ID                            0x0164 0x03D4 0x0730 0x4 0x1
+#define MX7D_PAD_I2C4_SDA__GPIO4_IO15                             0x0164 0x03D4 0x0000 0x5 0x0
+#define MX7D_PAD_I2C4_SDA__EPDC_VCOM1                             0x0164 0x03D4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK                         0x0168 0x03D8 0x0524 0x0 0x1
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX                        0x0168 0x03D8 0x071C 0x1 0x2
+#define MX7D_PAD_ECSPI1_SCLK__UART6_DTE_TX                        0x0168 0x03D8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SCLK__SD2_DATA4                           0x0168 0x03D8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SCLK__CSI_DATA2                           0x0168 0x03D8 0x04F8 0x3 0x1
+#define MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16                          0x0168 0x03D8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SCLK__EPDC_PWR_COM                        0x0168 0x03D8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI                         0x016C 0x03DC 0x052C 0x0 0x1
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX                        0x016C 0x03DC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MOSI__UART6_DTE_RX                        0x016C 0x03DC 0x071C 0x1 0x3
+#define MX7D_PAD_ECSPI1_MOSI__SD2_DATA5                           0x016C 0x03DC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MOSI__CSI_DATA3                           0x016C 0x03DC 0x04FC 0x3 0x1
+#define MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17                          0x016C 0x03DC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MOSI__EPDC_PWR_STAT                       0x016C 0x03DC 0x0580 0x6 0x1
+#define MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO                         0x0170 0x03E0 0x0528 0x0 0x1
+#define MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS                       0x0170 0x03E0 0x0718 0x1 0x2
+#define MX7D_PAD_ECSPI1_MISO__UART6_DTE_CTS                       0x0170 0x03E0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_MISO__SD2_DATA6                           0x0170 0x03E0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_MISO__CSI_DATA4                           0x0170 0x03E0 0x0500 0x3 0x1
+#define MX7D_PAD_ECSPI1_MISO__GPIO4_IO18                          0x0170 0x03E0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_MISO__EPDC_PWR_IRQ                        0x0170 0x03E0 0x057C 0x6 0x0
+#define MX7D_PAD_ECSPI1_SS0__ECSPI1_SS0                           0x0174 0x03E4 0x0530 0x0 0x1
+#define MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS                        0x0174 0x03E4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI1_SS0__UART6_DTE_RTS                        0x0174 0x03E4 0x0718 0x1 0x3
+#define MX7D_PAD_ECSPI1_SS0__SD2_DATA7                            0x0174 0x03E4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI1_SS0__CSI_DATA5                            0x0174 0x03E4 0x0504 0x3 0x1
+#define MX7D_PAD_ECSPI1_SS0__GPIO4_IO19                           0x0174 0x03E4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI1_SS0__EPDC_PWR_CTRL3                       0x0174 0x03E4 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_SCLK__ECSPI2_SCLK                         0x0178 0x03E8 0x0534 0x0 0x0
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DCE_RX                        0x0178 0x03E8 0x0724 0x1 0x2
+#define MX7D_PAD_ECSPI2_SCLK__UART7_DTE_TX                        0x0178 0x03E8 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SCLK__SD1_DATA4                           0x0178 0x03E8 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SCLK__CSI_DATA6                           0x0178 0x03E8 0x0508 0x3 0x1
+#define MX7D_PAD_ECSPI2_SCLK__LCD_DATA13                          0x0178 0x03E8 0x066C 0x4 0x2
+#define MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20                          0x0178 0x03E8 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SCLK__EPDC_PWR_CTRL0                      0x0178 0x03E8 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MOSI__ECSPI2_MOSI                         0x017C 0x03EC 0x053C 0x0 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DCE_TX                        0x017C 0x03EC 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MOSI__UART7_DTE_RX                        0x017C 0x03EC 0x0724 0x1 0x3
+#define MX7D_PAD_ECSPI2_MOSI__SD1_DATA5                           0x017C 0x03EC 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MOSI__CSI_DATA7                           0x017C 0x03EC 0x050C 0x3 0x1
+#define MX7D_PAD_ECSPI2_MOSI__LCD_DATA14                          0x017C 0x03EC 0x0670 0x4 0x2
+#define MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21                          0x017C 0x03EC 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MOSI__EPDC_PWR_CTRL1                      0x017C 0x03EC 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__GPIO4_IO22                          0x0180 0x03F0 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_MISO__EPDC_PWR_CTRL2                      0x0180 0x03F0 0x0000 0x6 0x0
+#define MX7D_PAD_ECSPI2_MISO__ECSPI2_MISO                         0x0180 0x03F0 0x0538 0x0 0x0
+#define MX7D_PAD_ECSPI2_MISO__UART7_DCE_RTS                       0x0180 0x03F0 0x0720 0x1 0x2
+#define MX7D_PAD_ECSPI2_MISO__UART7_DTE_CTS                       0x0180 0x03F0 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_MISO__SD1_DATA6                           0x0180 0x03F0 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_MISO__CSI_DATA8                           0x0180 0x03F0 0x0510 0x3 0x1
+#define MX7D_PAD_ECSPI2_MISO__LCD_DATA15                          0x0180 0x03F0 0x0674 0x4 0x2
+#define MX7D_PAD_ECSPI2_SS0__ECSPI2_SS0                           0x0184 0x03F4 0x0540 0x0 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DCE_CTS                        0x0184 0x03F4 0x0000 0x1 0x0
+#define MX7D_PAD_ECSPI2_SS0__UART7_DTE_RTS                        0x0184 0x03F4 0x0720 0x1 0x3
+#define MX7D_PAD_ECSPI2_SS0__SD1_DATA7                            0x0184 0x03F4 0x0000 0x2 0x0
+#define MX7D_PAD_ECSPI2_SS0__CSI_DATA9                            0x0184 0x03F4 0x0514 0x3 0x1
+#define MX7D_PAD_ECSPI2_SS0__LCD_RESET                            0x0184 0x03F4 0x0000 0x4 0x0
+#define MX7D_PAD_ECSPI2_SS0__GPIO4_IO23                           0x0184 0x03F4 0x0000 0x5 0x0
+#define MX7D_PAD_ECSPI2_SS0__EPDC_PWR_WAKE                        0x0184 0x03F4 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_CD_B__SD1_CD_B                               0x0188 0x03F8 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CD_B__UART6_DCE_RX                           0x0188 0x03F8 0x071C 0x2 0x4
+#define MX7D_PAD_SD1_CD_B__UART6_DTE_TX                           0x0188 0x03F8 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CD_B__ECSPI4_MISO                            0x0188 0x03F8 0x0558 0x3 0x1
+#define MX7D_PAD_SD1_CD_B__FLEXTIMER1_CH0                         0x0188 0x03F8 0x0584 0x4 0x1
+#define MX7D_PAD_SD1_CD_B__GPIO5_IO0                              0x0188 0x03F8 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CD_B__CCM_CLKO1                              0x0188 0x03F8 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_WP__SD1_WP                                   0x018C 0x03FC 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_WP__UART6_DCE_TX                             0x018C 0x03FC 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_WP__UART6_DTE_RX                             0x018C 0x03FC 0x071C 0x2 0x5
+#define MX7D_PAD_SD1_WP__ECSPI4_MOSI                              0x018C 0x03FC 0x055C 0x3 0x1
+#define MX7D_PAD_SD1_WP__FLEXTIMER1_CH1                           0x018C 0x03FC 0x0588 0x4 0x1
+#define MX7D_PAD_SD1_WP__GPIO5_IO1                                0x018C 0x03FC 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_WP__CCM_CLKO2                                0x018C 0x03FC 0x0000 0x6 0x0
+#define MX7D_PAD_SD1_RESET_B__SD1_RESET_B                         0x0190 0x0400 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_RESET_B__SAI3_MCLK                           0x0190 0x0400 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_RESET_B__UART6_DCE_RTS                       0x0190 0x0400 0x0718 0x2 0x4
+#define MX7D_PAD_SD1_RESET_B__UART6_DTE_CTS                       0x0190 0x0400 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_RESET_B__ECSPI4_SCLK                         0x0190 0x0400 0x0554 0x3 0x1
+#define MX7D_PAD_SD1_RESET_B__FLEXTIMER1_CH2                      0x0190 0x0400 0x058C 0x4 0x1
+#define MX7D_PAD_SD1_RESET_B__GPIO5_IO2                           0x0190 0x0400 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CLK__SD1_CLK                                 0x0194 0x0404 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CLK__SAI3_RX_SYNC                            0x0194 0x0404 0x06CC 0x1 0x1
+#define MX7D_PAD_SD1_CLK__UART6_DCE_CTS                           0x0194 0x0404 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_CLK__UART6_DTE_RTS                           0x0194 0x0404 0x0718 0x2 0x5
+#define MX7D_PAD_SD1_CLK__ECSPI4_SS0                              0x0194 0x0404 0x0560 0x3 0x1
+#define MX7D_PAD_SD1_CLK__FLEXTIMER1_CH3                          0x0194 0x0404 0x0590 0x4 0x1
+#define MX7D_PAD_SD1_CLK__GPIO5_IO3                               0x0194 0x0404 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_CMD__SD1_CMD                                 0x0198 0x0408 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_CMD__SAI3_RX_BCLK                            0x0198 0x0408 0x06C4 0x1 0x1
+#define MX7D_PAD_SD1_CMD__ECSPI4_SS1                              0x0198 0x0408 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_CMD__FLEXTIMER2_CH0                          0x0198 0x0408 0x05AC 0x4 0x1
+#define MX7D_PAD_SD1_CMD__GPIO5_IO4                               0x0198 0x0408 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__SD1_DATA0                             0x019C 0x040C 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA0__SAI3_RX_DATA0                         0x019C 0x040C 0x06C8 0x1 0x1
+#define MX7D_PAD_SD1_DATA0__UART7_DCE_RX                          0x019C 0x040C 0x0724 0x2 0x4
+#define MX7D_PAD_SD1_DATA0__UART7_DTE_TX                          0x019C 0x040C 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA0__ECSPI4_SS2                            0x019C 0x040C 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA0__FLEXTIMER2_CH1                        0x019C 0x040C 0x05B0 0x4 0x1
+#define MX7D_PAD_SD1_DATA0__GPIO5_IO5                             0x019C 0x040C 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA0__CCM_EXT_CLK1                          0x019C 0x040C 0x04E4 0x6 0x1
+#define MX7D_PAD_SD1_DATA1__SD1_DATA1                             0x01A0 0x0410 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA1__SAI3_TX_BCLK                          0x01A0 0x0410 0x06D0 0x1 0x1
+#define MX7D_PAD_SD1_DATA1__UART7_DCE_TX                          0x01A0 0x0410 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA1__UART7_DTE_RX                          0x01A0 0x0410 0x0724 0x2 0x5
+#define MX7D_PAD_SD1_DATA1__ECSPI4_SS3                            0x01A0 0x0410 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA1__FLEXTIMER2_CH2                        0x01A0 0x0410 0x05B4 0x4 0x1
+#define MX7D_PAD_SD1_DATA1__GPIO5_IO6                             0x01A0 0x0410 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA1__CCM_EXT_CLK2                          0x01A0 0x0410 0x04E8 0x6 0x1
+#define MX7D_PAD_SD1_DATA2__SD1_DATA2                             0x01A4 0x0414 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA2__SAI3_TX_SYNC                          0x01A4 0x0414 0x06D4 0x1 0x1
+#define MX7D_PAD_SD1_DATA2__UART7_DCE_CTS                         0x01A4 0x0414 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA2__UART7_DTE_RTS                         0x01A4 0x0414 0x0720 0x2 0x4
+#define MX7D_PAD_SD1_DATA2__ECSPI4_RDY                            0x01A4 0x0414 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA2__FLEXTIMER2_CH3                        0x01A4 0x0414 0x05B8 0x4 0x1
+#define MX7D_PAD_SD1_DATA2__GPIO5_IO7                             0x01A4 0x0414 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA2__CCM_EXT_CLK3                          0x01A4 0x0414 0x04EC 0x6 0x1
+#define MX7D_PAD_SD1_DATA3__SD1_DATA3                             0x01A8 0x0418 0x0000 0x0 0x0
+#define MX7D_PAD_SD1_DATA3__SAI3_TX_DATA0                         0x01A8 0x0418 0x0000 0x1 0x0
+#define MX7D_PAD_SD1_DATA3__UART7_DCE_RTS                         0x01A8 0x0418 0x0720 0x2 0x5
+#define MX7D_PAD_SD1_DATA3__UART7_DTE_CTS                         0x01A8 0x0418 0x0000 0x2 0x0
+#define MX7D_PAD_SD1_DATA3__ECSPI3_SS1                            0x01A8 0x0418 0x0000 0x3 0x0
+#define MX7D_PAD_SD1_DATA3__FLEXTIMER1_PHA                        0x01A8 0x0418 0x05A4 0x4 0x1
+#define MX7D_PAD_SD1_DATA3__GPIO5_IO8                             0x01A8 0x0418 0x0000 0x5 0x0
+#define MX7D_PAD_SD1_DATA3__CCM_EXT_CLK4                          0x01A8 0x0418 0x04F0 0x6 0x1
+#define MX7D_PAD_SD2_CD_B__SD2_CD_B                               0x01AC 0x041C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CD_B__ENET1_MDIO                             0x01AC 0x041C 0x0568 0x1 0x2
+#define MX7D_PAD_SD2_CD_B__ENET2_MDIO                             0x01AC 0x041C 0x0574 0x2 0x2
+#define MX7D_PAD_SD2_CD_B__ECSPI3_SS2                             0x01AC 0x041C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CD_B__FLEXTIMER1_PHB                         0x01AC 0x041C 0x05A8 0x4 0x1
+#define MX7D_PAD_SD2_CD_B__GPIO5_IO9                              0x01AC 0x041C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CD_B__SDMA_EXT_EVENT0                        0x01AC 0x041C 0x06D8 0x6 0x2
+#define MX7D_PAD_SD2_WP__SD2_WP                                   0x01B0 0x0420 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_WP__ENET1_MDC                                0x01B0 0x0420 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_WP__ENET2_MDC                                0x01B0 0x0420 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_WP__ECSPI3_SS3                               0x01B0 0x0420 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_WP__USB_OTG1_ID                              0x01B0 0x0420 0x0734 0x4 0x2
+#define MX7D_PAD_SD2_WP__GPIO5_IO10                               0x01B0 0x0420 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_WP__SDMA_EXT_EVENT1                          0x01B0 0x0420 0x06DC 0x6 0x2
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET_B                         0x01B4 0x0424 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_RESET_B__SAI2_MCLK                           0x01B4 0x0424 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_RESET_B__SD2_RESET                           0x01B4 0x0424 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_RESET_B__ECSPI3_RDY                          0x01B4 0x0424 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_RESET_B__USB_OTG2_ID                         0x01B4 0x0424 0x0730 0x4 0x2
+#define MX7D_PAD_SD2_RESET_B__GPIO5_IO11                          0x01B4 0x0424 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CLK__SD2_CLK                                 0x01B8 0x0428 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CLK__SAI2_RX_SYNC                            0x01B8 0x0428 0x06B8 0x1 0x0
+#define MX7D_PAD_SD2_CLK__MQS_RIGHT                               0x01B8 0x0428 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CLK__GPT4_CLK                                0x01B8 0x0428 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CLK__GPIO5_IO12                              0x01B8 0x0428 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_CMD__SD2_CMD                                 0x01BC 0x042C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_CMD__SAI2_RX_BCLK                            0x01BC 0x042C 0x06B0 0x1 0x0
+#define MX7D_PAD_SD2_CMD__MQS_LEFT                                0x01BC 0x042C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_CMD__GPT4_CAPTURE1                           0x01BC 0x042C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_CMD__SIM2_PORT1_TRXD                         0x01BC 0x042C 0x06EC 0x4 0x1
+#define MX7D_PAD_SD2_CMD__GPIO5_IO13                              0x01BC 0x042C 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA0__SD2_DATA0                             0x01C0 0x0430 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA0__SAI2_RX_DATA0                         0x01C0 0x0430 0x06B4 0x1 0x0
+#define MX7D_PAD_SD2_DATA0__UART4_DCE_RX                          0x01C0 0x0430 0x070C 0x2 0x2
+#define MX7D_PAD_SD2_DATA0__UART4_DTE_TX                          0x01C0 0x0430 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA0__GPT4_CAPTURE2                         0x01C0 0x0430 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA0__SIM2_PORT1_CLK                        0x01C0 0x0430 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA0__GPIO5_IO14                            0x01C0 0x0430 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA1__SD2_DATA1                             0x01C4 0x0434 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA1__SAI2_TX_BCLK                          0x01C4 0x0434 0x06BC 0x1 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DCE_TX                          0x01C4 0x0434 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA1__UART4_DTE_RX                          0x01C4 0x0434 0x070C 0x2 0x3
+#define MX7D_PAD_SD2_DATA1__GPT4_COMPARE1                         0x01C4 0x0434 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA1__SIM2_PORT1_RST_B                      0x01C4 0x0434 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA1__GPIO5_IO15                            0x01C4 0x0434 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA2__SD2_DATA2                             0x01C8 0x0438 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA2__SAI2_TX_SYNC                          0x01C8 0x0438 0x06C0 0x1 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DCE_CTS                         0x01C8 0x0438 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA2__UART4_DTE_RTS                         0x01C8 0x0438 0x0708 0x2 0x2
+#define MX7D_PAD_SD2_DATA2__GPT4_COMPARE2                         0x01C8 0x0438 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA2__SIM2_PORT1_SVEN                       0x01C8 0x0438 0x0000 0x4 0x0
+#define MX7D_PAD_SD2_DATA2__GPIO5_IO16                            0x01C8 0x0438 0x0000 0x5 0x0
+#define MX7D_PAD_SD2_DATA3__SD2_DATA3                             0x01CC 0x043C 0x0000 0x0 0x0
+#define MX7D_PAD_SD2_DATA3__SAI2_TX_DATA0                         0x01CC 0x043C 0x0000 0x1 0x0
+#define MX7D_PAD_SD2_DATA3__UART4_DCE_RTS                         0x01CC 0x043C 0x0708 0x2 0x3
+#define MX7D_PAD_SD2_DATA3__UART4_DTE_CTS                         0x01CC 0x043C 0x0000 0x2 0x0
+#define MX7D_PAD_SD2_DATA3__GPT4_COMPARE3                         0x01CC 0x043C 0x0000 0x3 0x0
+#define MX7D_PAD_SD2_DATA3__SIM2_PORT1_PD                         0x01CC 0x043C 0x06E8 0x4 0x1
+#define MX7D_PAD_SD2_DATA3__GPIO5_IO17                            0x01CC 0x043C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CLK__SD3_CLK                                 0x01D0 0x0440 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CLK__NAND_CLE                                0x01D0 0x0440 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CLK__ECSPI4_MISO                             0x01D0 0x0440 0x0558 0x2 0x2
+#define MX7D_PAD_SD3_CLK__SAI3_RX_SYNC                            0x01D0 0x0440 0x06CC 0x3 0x2
+#define MX7D_PAD_SD3_CLK__GPT3_CLK                                0x01D0 0x0440 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CLK__GPIO6_IO0                               0x01D0 0x0440 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_CMD__SD3_CMD                                 0x01D4 0x0444 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_CMD__NAND_ALE                                0x01D4 0x0444 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_CMD__ECSPI4_MOSI                             0x01D4 0x0444 0x055C 0x2 0x2
+#define MX7D_PAD_SD3_CMD__SAI3_RX_BCLK                            0x01D4 0x0444 0x06C4 0x3 0x2
+#define MX7D_PAD_SD3_CMD__GPT3_CAPTURE1                           0x01D4 0x0444 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_CMD__GPIO6_IO1                               0x01D4 0x0444 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA0__SD3_DATA0                             0x01D8 0x0448 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA0__NAND_DATA00                           0x01D8 0x0448 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA0__ECSPI4_SS0                            0x01D8 0x0448 0x0560 0x2 0x2
+#define MX7D_PAD_SD3_DATA0__SAI3_RX_DATA0                         0x01D8 0x0448 0x06C8 0x3 0x2
+#define MX7D_PAD_SD3_DATA0__GPT3_CAPTURE2                         0x01D8 0x0448 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA0__GPIO6_IO2                             0x01D8 0x0448 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA1__SD3_DATA1                             0x01DC 0x044C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA1__NAND_DATA01                           0x01DC 0x044C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA1__ECSPI4_SCLK                           0x01DC 0x044C 0x0554 0x2 0x2
+#define MX7D_PAD_SD3_DATA1__SAI3_TX_BCLK                          0x01DC 0x044C 0x06D0 0x3 0x2
+#define MX7D_PAD_SD3_DATA1__GPT3_COMPARE1                         0x01DC 0x044C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA1__GPIO6_IO3                             0x01DC 0x044C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA2__SD3_DATA2                             0x01E0 0x0450 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA2__NAND_DATA02                           0x01E0 0x0450 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA2__I2C3_SDA                              0x01E0 0x0450 0x05E8 0x2 0x3
+#define MX7D_PAD_SD3_DATA2__SAI3_TX_SYNC                          0x01E0 0x0450 0x06D4 0x3 0x2
+#define MX7D_PAD_SD3_DATA2__GPT3_COMPARE2                         0x01E0 0x0450 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA2__GPIO6_IO4                             0x01E0 0x0450 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA3__SD3_DATA3                             0x01E4 0x0454 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA3__NAND_DATA03                           0x01E4 0x0454 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA3__I2C3_SCL                              0x01E4 0x0454 0x05E4 0x2 0x3
+#define MX7D_PAD_SD3_DATA3__SAI3_TX_DATA0                         0x01E4 0x0454 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA3__GPT3_COMPARE3                         0x01E4 0x0454 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA3__GPIO6_IO5                             0x01E4 0x0454 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA4__SD3_DATA4                             0x01E8 0x0458 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA4__NAND_DATA04                           0x01E8 0x0458 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA4__UART3_DCE_RX                          0x01E8 0x0458 0x0704 0x3 0x4
+#define MX7D_PAD_SD3_DATA4__UART3_DTE_TX                          0x01E8 0x0458 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA4__FLEXCAN2_RX                           0x01E8 0x0458 0x04E0 0x4 0x2
+#define MX7D_PAD_SD3_DATA4__GPIO6_IO6                             0x01E8 0x0458 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA5__SD3_DATA5                             0x01EC 0x045C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA5__NAND_DATA05                           0x01EC 0x045C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DCE_TX                          0x01EC 0x045C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA5__UART3_DTE_RX                          0x01EC 0x045C 0x0704 0x3 0x5
+#define MX7D_PAD_SD3_DATA5__FLEXCAN1_TX                           0x01EC 0x045C 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA5__GPIO6_IO7                             0x01EC 0x045C 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_DATA6                             0x01F0 0x0460 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA6__NAND_DATA06                           0x01F0 0x0460 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA6__SD3_WP                                0x01F0 0x0460 0x073C 0x2 0x2
+#define MX7D_PAD_SD3_DATA6__UART3_DCE_RTS                         0x01F0 0x0460 0x0700 0x3 0x4
+#define MX7D_PAD_SD3_DATA6__UART3_DTE_CTS                         0x01F0 0x0460 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA6__FLEXCAN2_TX                           0x01F0 0x0460 0x0000 0x4 0x0
+#define MX7D_PAD_SD3_DATA6__GPIO6_IO8                             0x01F0 0x0460 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_DATA7                             0x01F4 0x0464 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_DATA7__NAND_DATA07                           0x01F4 0x0464 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_DATA7__SD3_CD_B                              0x01F4 0x0464 0x0738 0x2 0x2
+#define MX7D_PAD_SD3_DATA7__UART3_DCE_CTS                         0x01F4 0x0464 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_DATA7__UART3_DTE_RTS                         0x01F4 0x0464 0x0700 0x3 0x5
+#define MX7D_PAD_SD3_DATA7__FLEXCAN1_RX                           0x01F4 0x0464 0x04DC 0x4 0x2
+#define MX7D_PAD_SD3_DATA7__GPIO6_IO9                             0x01F4 0x0464 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_STROBE__SD3_STROBE                           0x01F8 0x0468 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_STROBE__NAND_RE_B                            0x01F8 0x0468 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_STROBE__GPIO6_IO10                           0x01F8 0x0468 0x0000 0x5 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET_B                         0x01FC 0x046C 0x0000 0x0 0x0
+#define MX7D_PAD_SD3_RESET_B__NAND_WE_B                           0x01FC 0x046C 0x0000 0x1 0x0
+#define MX7D_PAD_SD3_RESET_B__SD3_RESET                           0x01FC 0x046C 0x0000 0x2 0x0
+#define MX7D_PAD_SD3_RESET_B__SAI3_MCLK                           0x01FC 0x046C 0x0000 0x3 0x0
+#define MX7D_PAD_SD3_RESET_B__GPIO6_IO11                          0x01FC 0x046C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0                      0x0200 0x0470 0x06A0 0x0 0x0
+#define MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B                         0x0200 0x0470 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX                       0x0200 0x0470 0x0714 0x2 0x2
+#define MX7D_PAD_SAI1_RX_DATA__UART5_DTE_TX                       0x0200 0x0470 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_RX_DATA__FLEXCAN1_RX                        0x0200 0x0470 0x04DC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_DATA__SIM1_PORT1_TRXD                    0x0200 0x0470 0x06E4 0x4 0x1
+#define MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12                         0x0200 0x0470 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_DATA__SRC_ANY_PU_RESET                   0x0200 0x0470 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SAI1_TX_BCLK                       0x0204 0x0474 0x06A8 0x0 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B                         0x0204 0x0474 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX                       0x0204 0x0474 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__UART5_DTE_RX                       0x0204 0x0474 0x0714 0x2 0x3
+#define MX7D_PAD_SAI1_TX_BCLK__FLEXCAN1_TX                        0x0204 0x0474 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SIM1_PORT1_CLK                     0x0204 0x0474 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13                         0x0204 0x0474 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_BCLK__SRC_EARLY_RESET                    0x0204 0x0474 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC                       0x0208 0x0478 0x06AC 0x0 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__NAND_DQS                           0x0208 0x0478 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS                      0x0208 0x0478 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__UART5_DTE_RTS                      0x0208 0x0478 0x0710 0x2 0x2
+#define MX7D_PAD_SAI1_TX_SYNC__FLEXCAN2_RX                        0x0208 0x0478 0x04E0 0x3 0x3
+#define MX7D_PAD_SAI1_TX_SYNC__SIM1_PORT1_RST_B                   0x0208 0x0478 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14                         0x0208 0x0478 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_SYNC__SRC_INT_BOOT                       0x0208 0x0478 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SAI1_TX_DATA0                      0x020C 0x047C 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_TX_DATA__NAND_READY_B                       0x020C 0x047C 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS                      0x020C 0x047C 0x0710 0x2 0x3
+#define MX7D_PAD_SAI1_TX_DATA__UART5_DTE_CTS                      0x020C 0x047C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_TX_DATA__FLEXCAN2_TX                        0x020C 0x047C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SIM1_PORT1_SVEN                    0x020C 0x047C 0x0000 0x4 0x0
+#define MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15                         0x020C 0x047C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_TX_DATA__SRC_SYSTEM_RESET                   0x020C 0x047C 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI1_RX_SYNC                       0x0210 0x0480 0x06A4 0x0 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B                         0x0210 0x0480 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SAI2_RX_SYNC                       0x0210 0x0480 0x06B8 0x2 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL                           0x0210 0x0480 0x05EC 0x3 0x3
+#define MX7D_PAD_SAI1_RX_SYNC__SIM1_PORT1_PD                      0x0210 0x0480 0x06E0 0x4 0x1
+#define MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16                         0x0210 0x0480 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__MQS_RIGHT                          0x0210 0x0480 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_SYNC__SRC_CA7_RESET_B0                   0x0210 0x0480 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI1_RX_BCLK                       0x0214 0x0484 0x069C 0x0 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B                         0x0214 0x0484 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SAI2_RX_BCLK                       0x0214 0x0484 0x06B0 0x2 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA                           0x0214 0x0484 0x05F0 0x3 0x3
+#define MX7D_PAD_SAI1_RX_BCLK__FLEXTIMER2_PHA                     0x0214 0x0484 0x05CC 0x4 0x1
+#define MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17                         0x0214 0x0484 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__MQS_LEFT                           0x0214 0x0484 0x0000 0x6 0x0
+#define MX7D_PAD_SAI1_RX_BCLK__SRC_CA7_RESET_B1                   0x0214 0x0484 0x0000 0x7 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI1_MCLK                             0x0218 0x0488 0x0000 0x0 0x0
+#define MX7D_PAD_SAI1_MCLK__NAND_WP_B                             0x0218 0x0488 0x0000 0x1 0x0
+#define MX7D_PAD_SAI1_MCLK__SAI2_MCLK                             0x0218 0x0488 0x0000 0x2 0x0
+#define MX7D_PAD_SAI1_MCLK__CCM_PMIC_READY                        0x0218 0x0488 0x04F4 0x3 0x3
+#define MX7D_PAD_SAI1_MCLK__FLEXTIMER2_PHB                        0x0218 0x0488 0x05D0 0x4 0x1
+#define MX7D_PAD_SAI1_MCLK__GPIO6_IO18                            0x0218 0x0488 0x0000 0x5 0x0
+#define MX7D_PAD_SAI1_MCLK__SRC_TESTER_ACK                        0x0218 0x0488 0x0000 0x7 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__SAI2_TX_SYNC                       0x021C 0x048C 0x06C0 0x0 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO                        0x021C 0x048C 0x0548 0x1 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DCE_RX                       0x021C 0x048C 0x070C 0x2 0x4
+#define MX7D_PAD_SAI2_TX_SYNC__UART4_DTE_TX                       0x021C 0x048C 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DCE_CTS                      0x021C 0x048C 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS                      0x021C 0x048C 0x06F0 0x3 0x0
+#define MX7D_PAD_SAI2_TX_SYNC__FLEXTIMER2_CH4                     0x021C 0x048C 0x05BC 0x4 0x1
+#define MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19                         0x021C 0x048C 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__SAI2_TX_BCLK                       0x0220 0x0490 0x06BC 0x0 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI                        0x0220 0x0490 0x054C 0x1 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DCE_TX                       0x0220 0x0490 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__UART4_DTE_RX                       0x0220 0x0490 0x070C 0x2 0x5
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DCE_RTS                      0x0220 0x0490 0x06F0 0x3 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS                      0x0220 0x0490 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_BCLK__FLEXTIMER2_CH5                     0x0220 0x0490 0x05C0 0x4 0x1
+#define MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20                         0x0220 0x0490 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__SAI2_RX_DATA0                      0x0224 0x0494 0x06B4 0x0 0x1
+#define MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK                        0x0224 0x0494 0x0544 0x1 0x1
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DCE_CTS                      0x0224 0x0494 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART4_DTE_RTS                      0x0224 0x0494 0x0708 0x2 0x4
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DCE_CTS                      0x0224 0x0494 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS                      0x0224 0x0494 0x06F8 0x3 0x2
+#define MX7D_PAD_SAI2_RX_DATA__FLEXTIMER2_CH6                     0x0224 0x0494 0x05C4 0x4 0x1
+#define MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21                         0x0224 0x0494 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_RX_DATA__KPP_COL7                           0x0224 0x0494 0x0610 0x6 0x1
+#define MX7D_PAD_SAI2_TX_DATA__SAI2_TX_DATA0                      0x0228 0x0498 0x0000 0x0 0x0
+#define MX7D_PAD_SAI2_TX_DATA__ECSPI3_SS0                         0x0228 0x0498 0x0550 0x1 0x1
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DCE_RTS                      0x0228 0x0498 0x0708 0x2 0x5
+#define MX7D_PAD_SAI2_TX_DATA__UART4_DTE_CTS                      0x0228 0x0498 0x0000 0x2 0x0
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DCE_RTS                      0x0228 0x0498 0x06F8 0x3 0x3
+#define MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS                      0x0228 0x0498 0x0000 0x3 0x0
+#define MX7D_PAD_SAI2_TX_DATA__FLEXTIMER2_CH7                     0x0228 0x0498 0x05C8 0x4 0x1
+#define MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22                         0x0228 0x0498 0x0000 0x5 0x0
+#define MX7D_PAD_SAI2_TX_DATA__KPP_ROW7                           0x0228 0x0498 0x0630 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0                 0x022C 0x049C 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__PWM1_OUT                        0x022C 0x049C 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__I2C3_SCL                        0x022C 0x049C 0x05E4 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DCE_CTS                   0x022C 0x049C 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__UART1_DTE_RTS                   0x022C 0x049C 0x06F0 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD0__EPDC_VCOM0                      0x022C 0x049C 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0                       0x022C 0x049C 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD0__KPP_ROW3                        0x022C 0x049C 0x0620 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1                 0x0230 0x04A0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__PWM2_OUT                        0x0230 0x04A0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__I2C3_SDA                        0x0230 0x04A0 0x05E8 0x2 0x4
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DCE_RTS                   0x0230 0x04A0 0x06F0 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD1__UART1_DTE_CTS                   0x0230 0x04A0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__EPDC_VCOM1                      0x0230 0x04A0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1                       0x0230 0x04A0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD1__KPP_COL3                        0x0230 0x04A0 0x0600 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2                 0x0234 0x04A4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX                     0x0234 0x04A4 0x04DC 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_RD2__ECSPI2_SCLK                     0x0234 0x04A4 0x0534 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DCE_RX                    0x0234 0x04A4 0x06F4 0x3 0x2
+#define MX7D_PAD_ENET1_RGMII_RD2__UART1_DTE_TX                    0x0234 0x04A4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__EPDC_SDCE4                      0x0234 0x04A4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2                       0x0234 0x04A4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD2__KPP_ROW2                        0x0234 0x04A4 0x061C 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3                 0x0238 0x04A8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX                     0x0238 0x04A8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__ECSPI2_MOSI                     0x0238 0x04A8 0x053C 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DCE_TX                    0x0238 0x04A8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__UART1_DTE_RX                    0x0238 0x04A8 0x06F4 0x3 0x3
+#define MX7D_PAD_ENET1_RGMII_RD3__EPDC_SDCE5                      0x0238 0x04A8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3                       0x0238 0x04A8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RD3__KPP_COL2                        0x0238 0x04A8 0x05FC 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL           0x023C 0x04AC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__ECSPI2_SS1                   0x023C 0x04AC 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__EPDC_SDCE6                   0x023C 0x04AC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4                    0x023C 0x04AC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RX_CTL__KPP_ROW1                     0x023C 0x04AC 0x0618 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC                 0x0240 0x04B0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER                     0x0240 0x04B0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__ECSPI2_SS2                      0x0240 0x04B0 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__EPDC_SDCE7                      0x0240 0x04B0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5                       0x0240 0x04B0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_RXC__KPP_COL1                        0x0240 0x04B0 0x0000 0x6 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0                 0x0244 0x04B4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__PWM3_OUT                        0x0244 0x04B4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__ECSPI2_SS3                      0x0244 0x04B4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__EPDC_SDCE8                      0x0244 0x04B4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6                       0x0244 0x04B4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD0__KPP_ROW0                        0x0244 0x04B4 0x0614 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1                 0x0248 0x04B8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__PWM4_OUT                        0x0248 0x04B8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__ECSPI2_RDY                      0x0248 0x04B8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__EPDC_SDCE9                      0x0248 0x04B8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7                       0x0248 0x04B8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD1__KPP_COL0                        0x0248 0x04B8 0x05F4 0x6 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2                 0x024C 0x04BC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__FLEXCAN2_RX                     0x024C 0x04BC 0x04E0 0x1 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__ECSPI2_MISO                     0x024C 0x04BC 0x0538 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL                        0x024C 0x04BC 0x05EC 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD2__EPDC_SDOED                      0x024C 0x04BC 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8                       0x024C 0x04BC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3                 0x0250 0x04C0 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__FLEXCAN2_TX                     0x0250 0x04C0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__ECSPI2_SS0                      0x0250 0x04C0 0x0540 0x2 0x1
+#define MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA                        0x0250 0x04C0 0x05F0 0x3 0x4
+#define MX7D_PAD_ENET1_RGMII_TD3__EPDC_SDOEZ                      0x0250 0x04C0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9                       0x0250 0x04C0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TD3__CAAM_RNG_OSC_OBS                0x0250 0x04C0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL           0x0254 0x04C4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__SAI1_RX_SYNC                 0x0254 0x04C4 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPT2_COMPARE1                0x0254 0x04C4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__EPDC_PWR_CTRL2               0x0254 0x04C4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10                   0x0254 0x04C4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC                 0x0258 0x04C8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__ENET1_TX_ER                     0x0258 0x04C8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__SAI1_RX_BCLK                    0x0258 0x04C8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPT2_COMPARE2                   0x0258 0x04C8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__EPDC_PWR_CTRL3                  0x0258 0x04C8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11                      0x0258 0x04C8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__ENET1_TX_CLK                       0x025C 0x04CC 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_ENET_REF_CLK1                  0x025C 0x04CC 0x0564 0x1 0x2
+#define MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0                      0x025C 0x04CC 0x06A0 0x2 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPT2_COMPARE3                      0x025C 0x04CC 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_TX_CLK__EPDC_PWR_IRQ                       0x025C 0x04CC 0x057C 0x4 0x1
+#define MX7D_PAD_ENET1_TX_CLK__GPIO7_IO12                         0x025C 0x04CC 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_TX_CLK__CCM_EXT_CLK1                       0x025C 0x04CC 0x04E4 0x6 0x2
+#define MX7D_PAD_ENET1_TX_CLK__CSU_ALARM_AUT0                     0x025C 0x04CC 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_RX_CLK__ENET1_RX_CLK                       0x0260 0x04D0 0x056C 0x0 0x0
+#define MX7D_PAD_ENET1_RX_CLK__WDOG2_WDOG_B                       0x0260 0x04D0 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK                       0x0260 0x04D0 0x06A8 0x2 0x1
+#define MX7D_PAD_ENET1_RX_CLK__GPT2_CLK                           0x0260 0x04D0 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_RX_CLK__EPDC_PWR_WAKE                      0x0260 0x04D0 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_RX_CLK__GPIO7_IO13                         0x0260 0x04D0 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_RX_CLK__CCM_EXT_CLK2                       0x0260 0x04D0 0x04E8 0x6 0x2
+#define MX7D_PAD_ENET1_RX_CLK__CSU_ALARM_AUT1                     0x0260 0x04D0 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_CRS__ENET1_CRS                             0x0264 0x04D4 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_CRS__WDOG2_WDOG_RST_B_DEB                  0x0264 0x04D4 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_CRS__SAI1_TX_SYNC                          0x0264 0x04D4 0x06AC 0x2 0x1
+#define MX7D_PAD_ENET1_CRS__GPT2_CAPTURE1                         0x0264 0x04D4 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_CRS__EPDC_PWR_CTRL0                        0x0264 0x04D4 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_CRS__GPIO7_IO14                            0x0264 0x04D4 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_CRS__CCM_EXT_CLK3                          0x0264 0x04D4 0x04EC 0x6 0x2
+#define MX7D_PAD_ENET1_CRS__CSU_ALARM_AUT2                        0x0264 0x04D4 0x0000 0x7 0x0
+#define MX7D_PAD_ENET1_COL__ENET1_COL                             0x0268 0x04D8 0x0000 0x0 0x0
+#define MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY                        0x0268 0x04D8 0x0000 0x1 0x0
+#define MX7D_PAD_ENET1_COL__SAI1_TX_DATA0                         0x0268 0x04D8 0x0000 0x2 0x0
+#define MX7D_PAD_ENET1_COL__GPT2_CAPTURE2                         0x0268 0x04D8 0x0000 0x3 0x0
+#define MX7D_PAD_ENET1_COL__EPDC_PWR_CTRL1                        0x0268 0x04D8 0x0000 0x4 0x0
+#define MX7D_PAD_ENET1_COL__GPIO7_IO15                            0x0268 0x04D8 0x0000 0x5 0x0
+#define MX7D_PAD_ENET1_COL__CCM_EXT_CLK4                          0x0268 0x04D8 0x04F0 0x6 0x2
+#define MX7D_PAD_ENET1_COL__CSU_INT_DEB                           0x0268 0x04D8 0x0000 0x7 0x0
+
+#endif /* __DTS_IMX7D_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
new file mode 100644
index 000000000000..4d1a4b977d84
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -0,0 +1,408 @@
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "Freescale i.MX7 SabreSD Board";
+	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
+
+	memory {
+		reg = <0x80000000 0x80000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_usb_otg1_vbus: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "usb_otg1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_otg2_vbus: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "usb_otg2_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_can2_3v3: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "can2-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_vref_1v8: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "vref-1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic: pfuze3000@08 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* use sw1c_reg to align with pfuze100/pfuze200 */
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	codec: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio5 0 0>;
+	wp-gpios = <&gpio5 1 0>;
+	enable-sdio-wakeup;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx7d-sdb {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX7D_PAD_UART3_CTS_B__GPIO4_IO7		0x14
+				MX7D_PAD_ECSPI2_SS0__GPIO4_IO23		0x34  /* bt reg on */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+				MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX7D_PAD_I2C2_SDA__I2C2_SDA		0x4000007f
+				MX7D_PAD_I2C2_SCL__I2C2_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX7D_PAD_I2C3_SDA__I2C3_SDA		0x4000007f
+				MX7D_PAD_I2C3_SCL__I2C3_SCL		0x4000007f
+			>;
+		};
+
+		pinctrl_i2c4: i2c4grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_RX_BCLK__I2C4_SDA		0x4000007f
+				MX7D_PAD_SAI1_RX_SYNC__I2C4_SCL		0x4000007f
+			>;
+		};
+
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX	0x79
+				MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX	0x79
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX7D_PAD_SAI1_TX_BCLK__UART5_DCE_TX	0x79
+				MX7D_PAD_SAI1_RX_DATA__UART5_DCE_RX	0x79
+				MX7D_PAD_SAI1_TX_SYNC__UART5_DCE_CTS	0x79
+				MX7D_PAD_SAI1_TX_DATA__UART5_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_uart6: uart6grp {
+			fsl,pins = <
+				MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX	0x79
+				MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX	0x79
+				MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS	0x79
+				MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS	0x79
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+				MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+				MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+				MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+				MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+				MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+				MX7D_PAD_SD1_CD_B__GPIO5_IO0		0x59 /* CD */
+				MX7D_PAD_SD1_WP__GPIO5_IO1		0x59 /* WP */
+				MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0x59 /* vmmc */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x59
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x19
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x59
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x59
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x59
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x59
+				MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21	0x59 /* WL_REG_ON */
+			>;
+		};
+
+		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5a
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5a
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5a
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5a
+			>;
+		};
+
+		pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD2_CMD__SD2_CMD		0x5b
+				MX7D_PAD_SD2_CLK__SD2_CLK		0x1b
+				MX7D_PAD_SD2_DATA0__SD2_DATA0		0x5b
+				MX7D_PAD_SD2_DATA1__SD2_DATA1		0x5b
+				MX7D_PAD_SD2_DATA2__SD2_DATA2		0x5b
+				MX7D_PAD_SD2_DATA3__SD2_DATA3		0x5b
+			>;
+		};
+
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x19
+			>;
+		};
+
+		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5a
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5a
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5a
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5a
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5a
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5a
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5a
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5a
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1a
+			>;
+		};
+
+		pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+			fsl,pins = <
+				MX7D_PAD_SD3_CMD__SD3_CMD		0x5b
+				MX7D_PAD_SD3_CLK__SD3_CLK		0x1b
+				MX7D_PAD_SD3_DATA0__SD3_DATA0		0x5b
+				MX7D_PAD_SD3_DATA1__SD3_DATA1		0x5b
+				MX7D_PAD_SD3_DATA2__SD3_DATA2		0x5b
+				MX7D_PAD_SD3_DATA3__SD3_DATA3		0x5b
+				MX7D_PAD_SD3_DATA4__SD3_DATA4		0x5b
+				MX7D_PAD_SD3_DATA5__SD3_DATA5		0x5b
+				MX7D_PAD_SD3_DATA6__SD3_DATA6		0x5b
+				MX7D_PAD_SD3_DATA7__SD3_DATA7		0x5b
+				MX7D_PAD_SD3_STROBE__SD3_STROBE		0x1b
+			>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
new file mode 100644
index 000000000000..c42cf8db0451
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -0,0 +1,486 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_ARM_A7_ROOT_CLK>, <&clks IMX7D_ARM_A7_ROOT_SRC>,
+				 <&clks IMX7D_PLL_ARM_MAIN_CLK>, <&clks IMX7D_PLL_SYS_MAIN_CLK>;
+			clock-names = "arm", "arm_root_src", "pll_arm", "pll_sys_main";
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	intc: interrupt-controller@31001000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x31001000 0x1000>,
+		      <0x31002000 0x1000>,
+		      <0x31004000 0x2000>,
+		      <0x31006000 0x2000>;
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		aips1: aips-bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpt1: gpt@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: gpt@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: gpt@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: gpt@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d@210 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <31>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x30370000 0x10000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+
+			clks: ccm@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips3: aips-bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+					<&clks IMX7D_UART1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30870000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30870000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+					<&clks IMX7D_UART2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+					<&clks IMX7D_UART3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usdhc1: usdhc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
index 560d62150ade..50c83c21d911 100644
--- a/arch/arm/boot/dts/k2e-evm.dts
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -141,6 +141,7 @@
 };
 
 &mdio {
+	status = "ok";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi
new file mode 100644
index 000000000000..b13b3c94e7fc
--- /dev/null
+++ b/arch/arm/boot/dts/k2e-netcp.dtsi
@@ -0,0 +1,206 @@
+/*
+ * Device Tree Source for Keystone 2 Edison Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x2000>;
+	linkram0	= <0x100000 0x4000>;
+	linkram1	= <0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <528 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <544 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <896 128>;
+				qalloc-by-id;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000
+				 0x23a80000 0x23a90000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x24186000 0x100>,
+			  <0x24187000 0x2a0>,
+			  <0x24188000 0xb60>,
+			  <0x24186100 0x80>,
+			  <0x24189000 0x1000>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@24000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges = <0 0x24000000 0x1000000>;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>,
+			<&dma_gbe 8>,
+			<&dma_gbe 0>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 { /* ETHSS */
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-9";
+			reg = <0x200000 0x900>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <896>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+				port-4 {
+					slave-port = <4>;
+					link-interface	= <2>;
+				};
+				port-5 {
+					slave-port = <5>;
+					link-interface	= <2>;
+				};
+				port-6 {
+					slave-port = <6>;
+					link-interface	= <2>;
+				};
+				port-7 {
+					slave-port = <7>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <528>;
+			tx-completion-queue = <530>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <529>;
+			tx-completion-queue = <531>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 00];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi
index 5fc14683d6df..50e555eab50d 100644
--- a/arch/arm/boot/dts/k2e.dtsi
+++ b/arch/arm/boot/dts/k2e.dtsi
@@ -130,6 +130,7 @@
 					<GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
 			};
 		};
+		/include/ "k2e-netcp.dtsi"
 	};
 };
 
diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts
index 3223cc152a85..660ebf58d547 100644
--- a/arch/arm/boot/dts/k2hk-evm.dts
+++ b/arch/arm/boot/dts/k2hk-evm.dts
@@ -169,6 +169,7 @@
 };
 
 &mdio {
+	status = "ok";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi
new file mode 100644
index 000000000000..77a32c3c17e4
--- /dev/null
+++ b/arch/arm/boot/dts/k2hk-netcp.dtsi
@@ -0,0 +1,208 @@
+/*
+ * Device Tree Source for Keystone 2 Hawking Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x4000>;
+	linkram0	= <0x100000 0x8000>;
+	linkram1	= <0x0 0x10000>;
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+
+		qmgr1 {
+			managed-queues = <0x2000 0x2000>;
+			reg = <0x2a60000 0x20000>,
+			      <0x2a06400 0x400>,
+			      <0x2a04000 0x1000>,
+			      <0x2a05000 0x1000>,
+			      <0x23aa0000 0x20000>,
+			      <0x2aa0000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <8704 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <8720 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <640 9>;
+				qalloc-by-id;
+			};
+			netcpx-tx {
+				qrange = <8752 8>;
+				qalloc-by-id;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000
+				   0x23aa0000 0x23ab0000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x2004000 0x100>,
+			  <0x2004400 0x120>,
+			  <0x2004800 0x300>,
+			  <0x2004c00 0x120>,
+			  <0x2005000 0x400>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@2000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges  = <0 0x2000000 0x100000>;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 22>,
+			<&dma_gbe 23>,
+			<&dma_gbe 8>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		ranges;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		gbe@90000 { /* ETHSS */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe";
+			reg = <0x90000 0x300>, <0x90400 0x400>, <0x90800 0x700>;
+			/* enable-ale; */
+			tx-queue = <648>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface = <1>;
+					phy-handle = <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface = <1>;
+					phy-handle = <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8704>;
+			tx-completion-queue = <8706>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <8705>;
+			tx-completion-queue = <8707>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 6f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi
index d721f4b737f7..ae6472407b22 100644
--- a/arch/arm/boot/dts/k2hk.dtsi
+++ b/arch/arm/boot/dts/k2hk.dtsi
@@ -98,5 +98,6 @@
 			#gpio-cells = <2>;
 			gpio,syscon-dev = <&devctrl 0x25c>;
 		};
+		/include/ "k2hk-netcp.dtsi"
 	};
 };
diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts
index 85cc7f2872d7..9a69a6b55374 100644
--- a/arch/arm/boot/dts/k2l-evm.dts
+++ b/arch/arm/boot/dts/k2l-evm.dts
@@ -118,6 +118,7 @@
 };
 
 &mdio {
+	status = "ok";
 	ethphy0: ethernet-phy@0 {
 		compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
 		reg = <0>;
diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi
new file mode 100644
index 000000000000..6b95284d11d4
--- /dev/null
+++ b/arch/arm/boot/dts/k2l-netcp.dtsi
@@ -0,0 +1,189 @@
+/*
+ * Device Tree Source for Keystone 2 Lamarr Netcp driver
+ *
+ * Copyright 2015 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+qmss: qmss@2a40000 {
+	compatible = "ti,keystone-navigator-qmss";
+	dma-coherent;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	clocks = <&chipclk13>;
+	ranges;
+	queue-range	= <0 0x2000>;
+	linkram0	= <0x100000 0x4000>;
+	linkram1	= <0x70000000 0x10000>; /* 1MB OSR mem */
+
+	qmgrs {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		qmgr0 {
+			managed-queues = <0 0x2000>;
+			reg = <0x2a40000 0x20000>,
+			      <0x2a06000 0x400>,
+			      <0x2a02000 0x1000>,
+			      <0x2a03000 0x1000>,
+			      <0x23a80000 0x20000>,
+			      <0x2a80000 0x20000>;
+			reg-names = "peek", "status", "config",
+				    "region", "push", "pop";
+		};
+	};
+	queue-pools {
+		qpend {
+			qpend-0 {
+				qrange = <658 8>;
+				interrupts =<0 40 0xf04 0 41 0xf04 0 42 0xf04
+					     0 43 0xf04 0 44 0xf04 0 45 0xf04
+					     0 46 0xf04 0 47 0xf04>;
+			};
+			qpend-1 {
+				qrange = <528 16>;
+				interrupts = <0 48 0xf04 0 49 0xf04 0 50 0xf04
+					      0 51 0xf04 0 52 0xf04 0 53 0xf04
+					      0 54 0xf04 0 55 0xf04 0 56 0xf04
+					      0 57 0xf04 0 58 0xf04 0 59 0xf04
+					      0 60 0xf04 0 61 0xf04 0 62 0xf04
+					      0 63 0xf04>;
+				qalloc-by-id;
+			};
+			qpend-2 {
+				qrange = <544 16>;
+				interrupts = <0 64 0xf04 0 65 0xf04 0 66 0xf04
+					      0 59 0xf04 0 68 0xf04 0 69 0xf04
+					      0 70 0xf04 0 71 0xf04 0 72 0xf04
+					      0 73 0xf04 0 74 0xf04 0 75 0xf04
+					      0 76 0xf04 0 77 0xf04 0 78 0xf04
+					      0 79 0xf04>;
+			};
+		};
+		general-purpose {
+			gp-0 {
+				qrange = <4000 64>;
+			};
+			netcp-tx {
+				qrange = <896 128>;
+				qalloc-by-id;
+			};
+		};
+	};
+	descriptor-regions {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		region-12 {
+			id = <12>;
+			region-spec = <8192 128>;	/* num_desc desc_size */
+			link-index = <0x4000>;
+		};
+	};
+}; /* qmss */
+
+knav_dmas: knav_dmas@0 {
+	compatible = "ti,keystone-navigator-dma";
+	clocks = <&papllclk>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,navigator-cloud-address = <0x23a80000 0x23a90000>;
+
+	dma_gbe: dma_gbe@0 {
+		reg = <0x26186000 0x100>,
+			  <0x26187000 0x2a0>,
+			  <0x26188000 0xb60>,
+			  <0x26186100 0x80>,
+			  <0x26189000 0x1000>;
+		reg-names = "global", "txchan", "rxchan",
+				"txsched", "rxflow";
+	};
+};
+
+netcp: netcp@26000000 {
+	reg = <0x2620110 0x8>;
+	reg-names = "efuse";
+	compatible = "ti,netcp-1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/* NetCP address range */
+	ranges = <0 0x26000000 0x1000000>;
+
+	clocks = <&papllclk>, <&clkcpgmac>, <&chipclk12>;
+	dma-coherent;
+
+	ti,navigator-dmas = <&dma_gbe 0>,
+			<&dma_gbe 8>,
+			<&dma_gbe 0>;
+	ti,navigator-dma-names = "netrx0", "netrx1", "nettx";
+
+	netcp-devices {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		gbe@200000 { /* ETHSS */
+			label = "netcp-gbe";
+			compatible = "ti,netcp-gbe-5";
+			reg = <0x200000 0x900>, <0x220000 0x20000>;
+			/* enable-ale; */
+			tx-queue = <896>;
+			tx-channel = "nettx";
+
+			interfaces {
+				gbe0: interface-0 {
+					slave-port = <0>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy0>;
+				};
+				gbe1: interface-1 {
+					slave-port = <1>;
+					link-interface	= <1>;
+					phy-handle	= <&ethphy1>;
+				};
+			};
+
+			secondary-slave-ports {
+				port-2 {
+					slave-port = <2>;
+					link-interface	= <2>;
+				};
+				port-3 {
+					slave-port = <3>;
+					link-interface	= <2>;
+				};
+			};
+		};
+	};
+
+	netcp-interfaces {
+		interface-0 {
+			rx-channel = "netrx0";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <528>;
+			tx-completion-queue = <530>;
+			efuse-mac = <1>;
+			netcp-gbe = <&gbe0>;
+
+		};
+		interface-1 {
+			rx-channel = "netrx1";
+			rx-pool = <1024 12>;
+			tx-pool = <1024 12>;
+			rx-queue-depth = <128 128 0 0>;
+			rx-buffer-size = <1518 4096 0 0>;
+			rx-queue = <529>;
+			tx-completion-queue = <531>;
+			efuse-mac = <0>;
+			local-mac-address = [02 18 31 7e 3e 7f];
+			netcp-gbe = <&gbe1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi
index e32c3baa77b8..0e007483615e 100644
--- a/arch/arm/boot/dts/k2l.dtsi
+++ b/arch/arm/boot/dts/k2l.dtsi
@@ -79,6 +79,7 @@
 			#gpio-cells = <2>;
 			gpio,syscon-dev = <&devctrl 0x24c>;
 		};
+		/include/ "k2l-netcp.dtsi"
 	};
 };
 
diff --git a/arch/arm/boot/dts/kirkwood-b3.dts b/arch/arm/boot/dts/kirkwood-b3.dts
index c9247f8672ae..d2936ad3af1d 100644
--- a/arch/arm/boot/dts/kirkwood-b3.dts
+++ b/arch/arm/boot/dts/kirkwood-b3.dts
@@ -74,7 +74,7 @@
 			m25p16@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "st,m25p16";
+				compatible = "st,m25p16", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <40000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts
index ab6ab4933e6b..7ec76566acf2 100644
--- a/arch/arm/boot/dts/kirkwood-cloudbox.dts
+++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts
@@ -42,7 +42,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-dir665.dts b/arch/arm/boot/dts/kirkwood-dir665.dts
index 786959ee9cbe..0473fcc260f7 100644
--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -93,7 +93,7 @@
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d";
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
 				spi-max-frequency = <50000000>;
 				reg = <0>;
 
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 6467c7924195..e2abc8246bf3 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -42,7 +42,7 @@
 			m25p40@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mxicy,mx25l1606e";
+				compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <50000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 53484474df1f..1d6528d82969 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -74,7 +74,7 @@
 			m25p40@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "m25p40";
+				compatible = "m25p40", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <25000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
index f82827d6fcff..b7e7d78c484e 100644
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -65,7 +65,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mxicy,mx25l12805d";
+				compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <50000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
index b0cfb7cd30b9..1508b12147df 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -33,7 +33,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index fe6c0246db1a..e832b6320264 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -29,7 +29,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "mxicy,mx25l4005a";
+				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-rd88f6192.dts b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
index 35a29dee8dd8..e0b959396ca2 100644
--- a/arch/arm/boot/dts/kirkwood-rd88f6192.dts
+++ b/arch/arm/boot/dts/kirkwood-rd88f6192.dts
@@ -61,7 +61,7 @@
 			m25p128@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "st,m25p128";
+				compatible = "st,m25p128", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-synology.dtsi b/arch/arm/boot/dts/kirkwood-synology.dtsi
index 8be5b2e4626e..04015c174b99 100644
--- a/arch/arm/boot/dts/kirkwood-synology.dtsi
+++ b/arch/arm/boot/dts/kirkwood-synology.dtsi
@@ -217,7 +217,7 @@
 			m25p80@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "st,m25p80";
+				compatible = "st,m25p80", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index 610ec0f95858..ed956b849a71 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -88,7 +88,7 @@
 			flash@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "st,m25p80";
+				compatible = "st,m25p80", "jedec,spi-nor";
 				spi-max-frequency = <86000000>;
 				reg = <0>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219.dtsi b/arch/arm/boot/dts/kirkwood-ts219.dtsi
index df7f15276575..c56ab6bbfe3c 100644
--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -49,7 +49,7 @@
 			m25p128@0 {
 				#address-cells = <1>;
 				#size-cells = <1>;
-				compatible = "m25p128";
+				compatible = "m25p128", "jedec,spi-nor";
 				reg = <0>;
 				spi-max-frequency = <20000000>;
 				mode = <0>;
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
deleted file mode 100644
index e83e4f9310b8..000000000000
--- a/arch/arm/boot/dts/kizbox.dts
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * kizbox.dts - Device Tree file for Overkiz Kizbox board
- *
- * Copyright (C) 2012 Boris BREZILLON <linux-arm@overkiz.com>
- *
- * Licensed under GPLv2.
- */
-/dts-v1/;
-#include "at91sam9g20.dtsi"
-
-/ {
-
-	model = "Overkiz kizbox";
-	compatible = "overkiz,kizbox", "atmel,at91sam9g20", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "panic=5 ubi.mtd=1 rootfstype=ubifs root=ubi0:root";
-	};
-
-	memory {
-		reg = <0x20000000 0x2000000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
-		main_xtal {
-			clock-frequency = <18432000>;
-		};
-	};
-
-	ahb {
-		apb {
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@fffb0000 {
-				status = "okay";
-			};
-
-			usart1: serial@fffb4000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			status = "okay";
-
-			bootloaderkernel@0 {
-				label = "bootloader-kernel";
-				reg = <0x0 0xc0000>;
-			};
-
-			ubi@c0000 {
-				label = "ubi";
-				reg = <0xc0000 0x7f40000>;
-			};
-
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-	};
-
-	i2c@0 {
-		status = "okay";
-
-		pcf8563@51 {
-			/* nxp pcf8563 rtc */
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led1g {
-			label = "led1:green";
-			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led1r {
-			label = "led1:red";
-			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-
-		led2g {
-			label = "led2:green";
-			gpios = <&pioB 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-			default-state = "on";
-		};
-
-		led2r {
-			label = "led2:red";
-			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "none";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reset {
-			label = "reset";
-			gpios = <&pioB 30 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
-		};
-
-		mode {
-			label = "mode";
-			gpios = <&pioB 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x101>;
-			gpio-key,wakeup;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
new file mode 100644
index 000000000000..91146c318798
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@@ -0,0 +1,157 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "logicpd-torpedo-som.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+	model = "LogicPD Zoom DM3730 Torpedo Development Kit";
+	compatible = "logicpd,dm3730-torpedo-devkit", "ti,omap36xx";
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_pins &gpio_key_pins_wkup>;
+
+		sysboot2 {
+			label = "sysboot2";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;	/* gpio2 */
+			linux,code = <BTN_0>;
+			gpio-key,wakeup;
+		};
+
+		sysboot5 {
+			label = "sysboot5";
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;	/* gpio7 */
+			linux,code = <BTN_1>;
+			gpio-key,wakeup;
+		};
+
+		gpio1 {
+			label = "gpio1";
+			gpios = <&gpio6 21 GPIO_ACTIVE_LOW>;	/* gpio181 */
+			linux,code = <BTN_2>;
+			gpio-key,wakeup;
+		};
+
+		gpio2 {
+			label = "gpio2";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;	/* gpio178 */
+			linux,code = <BTN_3>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;	/* gpio180 */
+			linux,default-trigger = "cpu0";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;	/* gpio179 */
+			linux,default-trigger = "none";
+		};
+	};
+};
+
+&charger {
+	ti,bb-uvolt = <3200000>;
+	ti,bb-uamp = <150>;
+};
+
+&gpmc {
+	ranges = <1 0 0x08000000 0x1000000>;	/* CS1: 16MB for LAN9221 */
+
+	ethernet@gpmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan9221_pins>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;		/* gpio129 */
+		reg = <1 0 0xff>;
+	};
+};
+
+&mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;		/* gpio127 */
+	vmmc-supply = <&vmmc1>;
+	bus-width = <4>;
+	cap-power-off-card;
+};
+
+&omap3_pmx_core {
+	gpio_key_pins: pinmux_gpio_key_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_clk.gpio_178 */
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcspi2_cs0.gpio_181 */
+		>;
+	};
+
+	led_pins: pinmux_led_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d8, PIN_OUTPUT | MUX_MODE4)	/* gpio_179 */
+			OMAP3_CORE1_IOPAD(0x21da, PIN_OUTPUT | MUX_MODE4)	/* gpio_180 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+	gpio_key_pins_wkup: pinmux_gpio_key_pins_wkup {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot0.gpio_2 */
+			OMAP3_WKUP_IOPAD(0x2a14, PIN_INPUT_PULLUP | MUX_MODE4)	/* sys_boot5.gpio_7 */
+		>;
+	};
+
+	lan9221_pins: pinmux_lan9221_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a5a, PIN_INPUT | MUX_MODE4)		/* reserved.gpio_129 */
+		>;
+	};
+
+	mmc1_cd: pinmux_mmc1_cd {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a54, PIN_INPUT_PULLUP | MUX_MODE4)	/* reserved.gpio_127 */
+		>;
+	};
+};
+
+&uart1 {
+	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
+};
+
+/* Wired to the tps65950 on the SOM, only the USB connector is on the devkit */
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};
diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
new file mode 100644
index 000000000000..36387b11451d
--- /dev/null
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@@ -0,0 +1,162 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vcc>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		user0 {
+			label = "user0";
+			gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>;	/* LEDA */
+			linux,default-trigger = "none";
+		};
+	};
+
+	wl12xx_vmmc: wl12xx_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 29 0>;   /* gpio157 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&vmmc2>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x00000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		linux,mtd-name = "micron,mt29f4g16abbda3w";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* u-boot uses mtdparts=omap2-nand.0:512k(x-loader),1920k(u-boot),128k(u-boot-env),4m(kernel),-(fs) */
+
+		x-loader@0 {
+			label = "x-loader";
+			reg = <0 0x80000>;
+		};
+
+		bootloaders@80000 {
+			label = "u-boot";
+			reg = <0x80000 0x1e0000>;
+		};
+
+		bootloaders_env@260000 {
+			label = "u-boot-env";
+			reg = <0x260000 0x20000>;
+		};
+
+		kernel@280000 {
+			label = "kernel";
+			reg = <0x280000 0x400000>;
+		};
+
+		filesystem@680000 {
+			label = "fs";
+			reg = <0x680000 0>;	/* 0 = MTDPART_SIZ_FULL */
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/*
+ * Only found on the wireless SOM. For the SOM without wireless, the pins for
+ * MMC3 can be routed with jumpers to the second MMC slot on the devkit and
+ * gpio157 is not connected. So this should be OK to keep common for now,
+ * probably device tree overlays is the way to go with the various SOM and
+ * jumpering combinations for the long run.
+ */
+&mmc3 {
+	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1283";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
+		ref-clock-frequency = <26000000>;
+	};
+};
+
+&omap3_pmx_core {
+	mmc3_pins: pinmux_mm3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat4.sdmmc3_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat5.sdmmc3_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat2 */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc2_dat6.sdmmc3_dat3 */
+			OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4)	/* mcbsp4_clkx.gpio_152 */
+			OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4)	/* mcbsp1_fsr.gpio_157 */
+		>;
+	};
+};
+
+&omap3_pmx_core2 {
+	mmc3_core2_pins: pinmux_mmc3_core2_pins {
+		pinctrl-single,pins = <
+			OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_clk.sdmmc3_clk */
+			OMAP3630_CORE2_IOPAD(0x25da, PIN_INPUT_PULLUP | MUX_MODE2)   /* etk_ctl.sdmmc3_cmd */
+		>;
+	};
+};
+
+#include "twl4030.dtsi"
+#include "twl4030_omap3.dtsi"
+
+&twl {
+	twl_power: power {
+		compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
+		ti,use_poweroff;
+	};
+};
+
+&twl_gpio {
+	ti,use-leds;
+};
diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
new file mode 100644
index 000000000000..204da5b52ef9
--- /dev/null
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -0,0 +1,114 @@
+/*
+ * Common base for NXP LPC18xx and LPC43xx devices.
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-m3";
+			device_type = "cpu";
+			reg = <0x0>;
+		};
+	};
+
+	clocks {
+		xtal: xtal {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <12000000>;
+		};
+
+		/* Temporary hardcode PLL1 until clk drivers are merged */
+		pll1: pll1 {
+			compatible = "fixed-factor-clock";
+			clocks = <&xtal>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <12>;
+		};
+	};
+
+	soc {
+		uart0: serial@40081000 {
+			compatible = "ns16550a";
+			reg = <0x40081000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <24>;
+			clocks = <&pll1>;
+			status = "disabled";
+		};
+
+		uart1: serial@40082000 {
+			compatible = "ns16550a";
+			reg = <0x40082000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			clocks = <&pll1>;
+			status = "disabled";
+		};
+
+		timer0: timer@40084000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x40084000 0x1000>;
+			interrupts = <12>;
+			clocks = <&pll1>;
+			clock-names = "timerclk";
+		};
+
+		timer1: timer@40085000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x40085000 0x1000>;
+			interrupts = <13>;
+			clocks = <&pll1>;
+			clock-names = "timerclk";
+		};
+
+		uart2: serial@400c1000 {
+			compatible = "ns16550a";
+			reg = <0x400c1000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <26>;
+			clocks = <&pll1>;
+			status = "disabled";
+		};
+
+		uart3: serial@400c2000 {
+			compatible = "ns16550a";
+			reg = <0x400c2000 0x1000>;
+			reg-shift = <2>;
+			interrupts = <27>;
+			clocks = <&pll1>;
+			status = "disabled";
+		};
+
+		timer2: timer@400c3000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x400c3000 0x1000>;
+			interrupts = <14>;
+			clocks = <&pll1>;
+			clock-names = "timerclk";
+		};
+
+		timer3: timer@400c4000 {
+			compatible = "nxp,lpc3220-timer";
+			reg = <0x400c4000 0x1000>;
+			interrupts = <15>;
+			clocks = <&pll1>;
+			clock-names = "timerclk";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
new file mode 100644
index 000000000000..d04072f40817
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -0,0 +1,45 @@
+/*
+ * Hitex LPC4350 Evaluation Board
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4350.dtsi"
+
+/ {
+	model = "Hitex LPC4350 Evaluation Board";
+	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x28000000 0x800000>; /* 8 MB */
+	};
+};
+
+&pll1 {
+	clock-mult = <15>;
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc4350.dtsi b/arch/arm/boot/dts/lpc4350.dtsi
new file mode 100644
index 000000000000..c4422f587055
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4350.dtsi
@@ -0,0 +1,39 @@
+/*
+ * NXP LPC4350 and LPC4330 SoC
+ *
+ * Copyright 2015 Ariel D'Alessandro <ariel.dalessandro@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+	compatible = "nxp,lpc4350", "nxp,lpc4330";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-m4";
+		};
+	};
+
+	soc {
+		sram0: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+		};
+
+		sram1: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+		};
+
+		sram2: sram@20000000 {
+			compatible = "mmio-sram";
+			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
new file mode 100644
index 000000000000..08a6f757f924
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -0,0 +1,41 @@
+/*
+ * Embedded Artist LPC4357 Developer's Kit
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+/dts-v1/;
+
+#include "lpc18xx.dtsi"
+#include "lpc4357.dtsi"
+
+/ {
+	model = "Embedded Artists' LPC4357 Developer's Kit";
+	compatible = "ea,lpc4357-developers-kit", "nxp,lpc4357", "nxp,lpc4350";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x28000000 0x2000000>; /* 32 MB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/lpc4357.dtsi b/arch/arm/boot/dts/lpc4357.dtsi
new file mode 100644
index 000000000000..fb9ecc754e8d
--- /dev/null
+++ b/arch/arm/boot/dts/lpc4357.dtsi
@@ -0,0 +1,39 @@
+/*
+ * NXP LPC435x, LPC433x, LPC4327, LPC4325, LPC4317 and LPC4315 SoC
+ *
+ * Copyright 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * This code is released using a dual license strategy: BSD/GPL
+ * You can choose the licence that better fits your requirements.
+ *
+ * Released under the terms of 3-clause BSD License
+ * Released under the terms of GNU General Public License Version 2.0
+ *
+ */
+
+/ {
+	compatible = "nxp,lpc4357";
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-m4";
+		};
+	};
+
+	soc {
+		sram0: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+		};
+
+		sram1: sram@10080000 {
+			compatible = "mmio-sram";
+			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+		};
+
+		sram2: sram@20000000 {
+			compatible = "mmio-sram";
+			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi
index aaa786233d93..ca3402e8240b 100644
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -107,7 +107,7 @@
 			      <0 0x10216000 0 0x2000>;
 		};
 
-		uart0: serial@11006000 {
+		uart0: serial@11002000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
@@ -115,7 +115,7 @@
 			status = "disabled";
 		};
 
-		uart1: serial@11007000 {
+		uart1: serial@11003000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
@@ -123,7 +123,7 @@
 			status = "disabled";
 		};
 
-		uart2: serial@11008000 {
+		uart2: serial@11004000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
@@ -131,7 +131,7 @@
 			status = "disabled";
 		};
 
-		uart3: serial@11009000 {
+		uart3: serial@11005000 {
 			compatible = "mediatek,mt8127-uart","mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/arch/arm/boot/dts/mt8135-pinfunc.h
new file mode 100644
index 000000000000..5a609875cb18
--- /dev/null
+++ b/arch/arm/boot/dts/mt8135-pinfunc.h
@@ -0,0 +1,1302 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DTS_MT8135_PINFUNC_H
+#define __DTS_MT8135_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_MSDC0_DAT7 (MTK_PIN_NO(0) | 1)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_EINT49 (MTK_PIN_NO(0) | 2)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_I2SOUT_DAT (MTK_PIN_NO(0) | 3)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_DAC_DAT_OUT (MTK_PIN_NO(0) | 4)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_PCM1_DO (MTK_PIN_NO(0) | 5)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_SPI1_MO (MTK_PIN_NO(0) | 6)
+#define MT8135_PIN_0_MSDC0_DAT7__FUNC_NALE (MTK_PIN_NO(0) | 7)
+
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_MSDC0_DAT6 (MTK_PIN_NO(1) | 1)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_EINT48 (MTK_PIN_NO(1) | 2)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_I2SIN_WS (MTK_PIN_NO(1) | 3)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_DAC_WS (MTK_PIN_NO(1) | 4)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_PCM1_WS (MTK_PIN_NO(1) | 5)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_SPI1_CSN (MTK_PIN_NO(1) | 6)
+#define MT8135_PIN_1_MSDC0_DAT6__FUNC_NCLE (MTK_PIN_NO(1) | 7)
+
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_MSDC0_DAT5 (MTK_PIN_NO(2) | 1)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_EINT47 (MTK_PIN_NO(2) | 2)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_I2SIN_CK (MTK_PIN_NO(2) | 3)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_DAC_CK (MTK_PIN_NO(2) | 4)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_PCM1_CK (MTK_PIN_NO(2) | 5)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_SPI1_CLK (MTK_PIN_NO(2) | 6)
+#define MT8135_PIN_2_MSDC0_DAT5__FUNC_NLD4 (MTK_PIN_NO(2) | 7)
+
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_MSDC0_DAT4 (MTK_PIN_NO(3) | 1)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_EINT46 (MTK_PIN_NO(3) | 2)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_A_FUNC_CK (MTK_PIN_NO(3) | 3)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_LSCE1B_2X (MTK_PIN_NO(3) | 6)
+#define MT8135_PIN_3_MSDC0_DAT4__FUNC_NLD5 (MTK_PIN_NO(3) | 7)
+
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_MSDC0_CMD (MTK_PIN_NO(4) | 1)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_EINT41 (MTK_PIN_NO(4) | 2)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_A_FUNC_DOUT_0 (MTK_PIN_NO(4) | 3)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_USB_TEST_IO_0 (MTK_PIN_NO(4) | 5)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_LRSTB_2X (MTK_PIN_NO(4) | 6)
+#define MT8135_PIN_4_MSDC0_CMD__FUNC_NRNB (MTK_PIN_NO(4) | 7)
+
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_MSDC0_CLK (MTK_PIN_NO(5) | 1)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_EINT40 (MTK_PIN_NO(5) | 2)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_A_FUNC_DOUT_1 (MTK_PIN_NO(5) | 3)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_USB_TEST_IO_1 (MTK_PIN_NO(5) | 5)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_LPTE (MTK_PIN_NO(5) | 6)
+#define MT8135_PIN_5_MSDC0_CLK__FUNC_NREB (MTK_PIN_NO(5) | 7)
+
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_MSDC0_DAT3 (MTK_PIN_NO(6) | 1)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_EINT45 (MTK_PIN_NO(6) | 2)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_A_FUNC_DOUT_2 (MTK_PIN_NO(6) | 3)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_USB_TEST_IO_2 (MTK_PIN_NO(6) | 5)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_LSCE0B_2X (MTK_PIN_NO(6) | 6)
+#define MT8135_PIN_6_MSDC0_DAT3__FUNC_NLD7 (MTK_PIN_NO(6) | 7)
+
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_MSDC0_DAT2 (MTK_PIN_NO(7) | 1)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_EINT44 (MTK_PIN_NO(7) | 2)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_A_FUNC_DOUT_3 (MTK_PIN_NO(7) | 3)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_USB_TEST_IO_3 (MTK_PIN_NO(7) | 5)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_LSA0_2X (MTK_PIN_NO(7) | 6)
+#define MT8135_PIN_7_MSDC0_DAT2__FUNC_NLD14 (MTK_PIN_NO(7) | 7)
+
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_MSDC0_DAT1 (MTK_PIN_NO(8) | 1)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_EINT43 (MTK_PIN_NO(8) | 2)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_USB_TEST_IO_4 (MTK_PIN_NO(8) | 5)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_LSCK_2X (MTK_PIN_NO(8) | 6)
+#define MT8135_PIN_8_MSDC0_DAT1__FUNC_NLD11 (MTK_PIN_NO(8) | 7)
+
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_MSDC0_DAT0 (MTK_PIN_NO(9) | 1)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_EINT42 (MTK_PIN_NO(9) | 2)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_USB_TEST_IO_5 (MTK_PIN_NO(9) | 5)
+#define MT8135_PIN_9_MSDC0_DAT0__FUNC_LSDA_2X (MTK_PIN_NO(9) | 6)
+
+#define MT8135_PIN_10_NCEB0__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define MT8135_PIN_10_NCEB0__FUNC_NCEB0 (MTK_PIN_NO(10) | 1)
+#define MT8135_PIN_10_NCEB0__FUNC_EINT139 (MTK_PIN_NO(10) | 2)
+#define MT8135_PIN_10_NCEB0__FUNC_TESTA_OUT4 (MTK_PIN_NO(10) | 7)
+
+#define MT8135_PIN_11_NCEB1__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define MT8135_PIN_11_NCEB1__FUNC_NCEB1 (MTK_PIN_NO(11) | 1)
+#define MT8135_PIN_11_NCEB1__FUNC_EINT140 (MTK_PIN_NO(11) | 2)
+#define MT8135_PIN_11_NCEB1__FUNC_USB_DRVVBUS (MTK_PIN_NO(11) | 6)
+#define MT8135_PIN_11_NCEB1__FUNC_TESTA_OUT5 (MTK_PIN_NO(11) | 7)
+
+#define MT8135_PIN_12_NRNB__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define MT8135_PIN_12_NRNB__FUNC_NRNB (MTK_PIN_NO(12) | 1)
+#define MT8135_PIN_12_NRNB__FUNC_EINT141 (MTK_PIN_NO(12) | 2)
+#define MT8135_PIN_12_NRNB__FUNC_A_FUNC_DOUT_4 (MTK_PIN_NO(12) | 3)
+#define MT8135_PIN_12_NRNB__FUNC_TESTA_OUT6 (MTK_PIN_NO(12) | 7)
+
+#define MT8135_PIN_13_NCLE__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define MT8135_PIN_13_NCLE__FUNC_NCLE (MTK_PIN_NO(13) | 1)
+#define MT8135_PIN_13_NCLE__FUNC_EINT142 (MTK_PIN_NO(13) | 2)
+#define MT8135_PIN_13_NCLE__FUNC_A_FUNC_DOUT_5 (MTK_PIN_NO(13) | 3)
+#define MT8135_PIN_13_NCLE__FUNC_CM2PDN_1X (MTK_PIN_NO(13) | 4)
+#define MT8135_PIN_13_NCLE__FUNC_NALE (MTK_PIN_NO(13) | 6)
+#define MT8135_PIN_13_NCLE__FUNC_TESTA_OUT7 (MTK_PIN_NO(13) | 7)
+
+#define MT8135_PIN_14_NALE__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define MT8135_PIN_14_NALE__FUNC_NALE (MTK_PIN_NO(14) | 1)
+#define MT8135_PIN_14_NALE__FUNC_EINT143 (MTK_PIN_NO(14) | 2)
+#define MT8135_PIN_14_NALE__FUNC_A_FUNC_DOUT_6 (MTK_PIN_NO(14) | 3)
+#define MT8135_PIN_14_NALE__FUNC_CM2MCLK_1X (MTK_PIN_NO(14) | 4)
+#define MT8135_PIN_14_NALE__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
+#define MT8135_PIN_14_NALE__FUNC_NCLE (MTK_PIN_NO(14) | 6)
+#define MT8135_PIN_14_NALE__FUNC_TESTA_OUT8 (MTK_PIN_NO(14) | 7)
+
+#define MT8135_PIN_15_NREB__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define MT8135_PIN_15_NREB__FUNC_NREB (MTK_PIN_NO(15) | 1)
+#define MT8135_PIN_15_NREB__FUNC_EINT144 (MTK_PIN_NO(15) | 2)
+#define MT8135_PIN_15_NREB__FUNC_A_FUNC_DOUT_7 (MTK_PIN_NO(15) | 3)
+#define MT8135_PIN_15_NREB__FUNC_CM2RST_1X (MTK_PIN_NO(15) | 4)
+#define MT8135_PIN_15_NREB__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
+#define MT8135_PIN_15_NREB__FUNC_TESTA_OUT9 (MTK_PIN_NO(15) | 7)
+
+#define MT8135_PIN_16_NWEB__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define MT8135_PIN_16_NWEB__FUNC_NWEB (MTK_PIN_NO(16) | 1)
+#define MT8135_PIN_16_NWEB__FUNC_EINT145 (MTK_PIN_NO(16) | 2)
+#define MT8135_PIN_16_NWEB__FUNC_A_FUNC_DIN_0 (MTK_PIN_NO(16) | 3)
+#define MT8135_PIN_16_NWEB__FUNC_CM2PCLK_1X (MTK_PIN_NO(16) | 4)
+#define MT8135_PIN_16_NWEB__FUNC_IRDA_PDN (MTK_PIN_NO(16) | 5)
+#define MT8135_PIN_16_NWEB__FUNC_TESTA_OUT10 (MTK_PIN_NO(16) | 7)
+
+#define MT8135_PIN_17_NLD0__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define MT8135_PIN_17_NLD0__FUNC_NLD0 (MTK_PIN_NO(17) | 1)
+#define MT8135_PIN_17_NLD0__FUNC_EINT146 (MTK_PIN_NO(17) | 2)
+#define MT8135_PIN_17_NLD0__FUNC_A_FUNC_DIN_1 (MTK_PIN_NO(17) | 3)
+#define MT8135_PIN_17_NLD0__FUNC_CM2DAT_1X_0 (MTK_PIN_NO(17) | 4)
+#define MT8135_PIN_17_NLD0__FUNC_I2SIN_CK (MTK_PIN_NO(17) | 5)
+#define MT8135_PIN_17_NLD0__FUNC_DAC_CK (MTK_PIN_NO(17) | 6)
+#define MT8135_PIN_17_NLD0__FUNC_TESTA_OUT11 (MTK_PIN_NO(17) | 7)
+
+#define MT8135_PIN_18_NLD1__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define MT8135_PIN_18_NLD1__FUNC_NLD1 (MTK_PIN_NO(18) | 1)
+#define MT8135_PIN_18_NLD1__FUNC_EINT147 (MTK_PIN_NO(18) | 2)
+#define MT8135_PIN_18_NLD1__FUNC_A_FUNC_DIN_2 (MTK_PIN_NO(18) | 3)
+#define MT8135_PIN_18_NLD1__FUNC_CM2DAT_1X_1 (MTK_PIN_NO(18) | 4)
+#define MT8135_PIN_18_NLD1__FUNC_I2SIN_WS (MTK_PIN_NO(18) | 5)
+#define MT8135_PIN_18_NLD1__FUNC_DAC_WS (MTK_PIN_NO(18) | 6)
+#define MT8135_PIN_18_NLD1__FUNC_TESTA_OUT12 (MTK_PIN_NO(18) | 7)
+
+#define MT8135_PIN_19_NLD2__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define MT8135_PIN_19_NLD2__FUNC_NLD2 (MTK_PIN_NO(19) | 1)
+#define MT8135_PIN_19_NLD2__FUNC_EINT148 (MTK_PIN_NO(19) | 2)
+#define MT8135_PIN_19_NLD2__FUNC_A_FUNC_DIN_3 (MTK_PIN_NO(19) | 3)
+#define MT8135_PIN_19_NLD2__FUNC_CM2DAT_1X_2 (MTK_PIN_NO(19) | 4)
+#define MT8135_PIN_19_NLD2__FUNC_I2SOUT_DAT (MTK_PIN_NO(19) | 5)
+#define MT8135_PIN_19_NLD2__FUNC_DAC_DAT_OUT (MTK_PIN_NO(19) | 6)
+#define MT8135_PIN_19_NLD2__FUNC_TESTA_OUT13 (MTK_PIN_NO(19) | 7)
+
+#define MT8135_PIN_20_NLD3__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define MT8135_PIN_20_NLD3__FUNC_NLD3 (MTK_PIN_NO(20) | 1)
+#define MT8135_PIN_20_NLD3__FUNC_EINT149 (MTK_PIN_NO(20) | 2)
+#define MT8135_PIN_20_NLD3__FUNC_A_FUNC_DIN_4 (MTK_PIN_NO(20) | 3)
+#define MT8135_PIN_20_NLD3__FUNC_CM2DAT_1X_3 (MTK_PIN_NO(20) | 4)
+#define MT8135_PIN_20_NLD3__FUNC_TESTA_OUT14 (MTK_PIN_NO(20) | 7)
+
+#define MT8135_PIN_21_NLD4__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define MT8135_PIN_21_NLD4__FUNC_NLD4 (MTK_PIN_NO(21) | 1)
+#define MT8135_PIN_21_NLD4__FUNC_EINT150 (MTK_PIN_NO(21) | 2)
+#define MT8135_PIN_21_NLD4__FUNC_A_FUNC_DIN_5 (MTK_PIN_NO(21) | 3)
+#define MT8135_PIN_21_NLD4__FUNC_CM2DAT_1X_4 (MTK_PIN_NO(21) | 4)
+#define MT8135_PIN_21_NLD4__FUNC_TESTA_OUT15 (MTK_PIN_NO(21) | 7)
+
+#define MT8135_PIN_22_NLD5__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define MT8135_PIN_22_NLD5__FUNC_NLD5 (MTK_PIN_NO(22) | 1)
+#define MT8135_PIN_22_NLD5__FUNC_EINT151 (MTK_PIN_NO(22) | 2)
+#define MT8135_PIN_22_NLD5__FUNC_A_FUNC_DIN_6 (MTK_PIN_NO(22) | 3)
+#define MT8135_PIN_22_NLD5__FUNC_CM2DAT_1X_5 (MTK_PIN_NO(22) | 4)
+#define MT8135_PIN_22_NLD5__FUNC_TESTA_OUT16 (MTK_PIN_NO(22) | 7)
+
+#define MT8135_PIN_23_NLD6__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define MT8135_PIN_23_NLD6__FUNC_NLD6 (MTK_PIN_NO(23) | 1)
+#define MT8135_PIN_23_NLD6__FUNC_EINT152 (MTK_PIN_NO(23) | 2)
+#define MT8135_PIN_23_NLD6__FUNC_A_FUNC_DIN_7 (MTK_PIN_NO(23) | 3)
+#define MT8135_PIN_23_NLD6__FUNC_CM2DAT_1X_6 (MTK_PIN_NO(23) | 4)
+#define MT8135_PIN_23_NLD6__FUNC_TESTA_OUT17 (MTK_PIN_NO(23) | 7)
+
+#define MT8135_PIN_24_NLD7__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define MT8135_PIN_24_NLD7__FUNC_NLD7 (MTK_PIN_NO(24) | 1)
+#define MT8135_PIN_24_NLD7__FUNC_EINT153 (MTK_PIN_NO(24) | 2)
+#define MT8135_PIN_24_NLD7__FUNC_A_FUNC_DIN_8 (MTK_PIN_NO(24) | 3)
+#define MT8135_PIN_24_NLD7__FUNC_CM2DAT_1X_7 (MTK_PIN_NO(24) | 4)
+#define MT8135_PIN_24_NLD7__FUNC_TESTA_OUT18 (MTK_PIN_NO(24) | 7)
+
+#define MT8135_PIN_25_NLD8__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define MT8135_PIN_25_NLD8__FUNC_NLD8 (MTK_PIN_NO(25) | 1)
+#define MT8135_PIN_25_NLD8__FUNC_EINT154 (MTK_PIN_NO(25) | 2)
+#define MT8135_PIN_25_NLD8__FUNC_CM2DAT_1X_8 (MTK_PIN_NO(25) | 4)
+
+#define MT8135_PIN_26_NLD9__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define MT8135_PIN_26_NLD9__FUNC_NLD9 (MTK_PIN_NO(26) | 1)
+#define MT8135_PIN_26_NLD9__FUNC_EINT155 (MTK_PIN_NO(26) | 2)
+#define MT8135_PIN_26_NLD9__FUNC_CM2DAT_1X_9 (MTK_PIN_NO(26) | 4)
+#define MT8135_PIN_26_NLD9__FUNC_PWM1 (MTK_PIN_NO(26) | 5)
+
+#define MT8135_PIN_27_NLD10__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define MT8135_PIN_27_NLD10__FUNC_NLD10 (MTK_PIN_NO(27) | 1)
+#define MT8135_PIN_27_NLD10__FUNC_EINT156 (MTK_PIN_NO(27) | 2)
+#define MT8135_PIN_27_NLD10__FUNC_CM2VSYNC_1X (MTK_PIN_NO(27) | 4)
+#define MT8135_PIN_27_NLD10__FUNC_PWM2 (MTK_PIN_NO(27) | 5)
+
+#define MT8135_PIN_28_NLD11__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define MT8135_PIN_28_NLD11__FUNC_NLD11 (MTK_PIN_NO(28) | 1)
+#define MT8135_PIN_28_NLD11__FUNC_EINT157 (MTK_PIN_NO(28) | 2)
+#define MT8135_PIN_28_NLD11__FUNC_CM2HSYNC_1X (MTK_PIN_NO(28) | 4)
+#define MT8135_PIN_28_NLD11__FUNC_PWM3 (MTK_PIN_NO(28) | 5)
+
+#define MT8135_PIN_29_NLD12__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define MT8135_PIN_29_NLD12__FUNC_NLD12 (MTK_PIN_NO(29) | 1)
+#define MT8135_PIN_29_NLD12__FUNC_EINT158 (MTK_PIN_NO(29) | 2)
+#define MT8135_PIN_29_NLD12__FUNC_I2SIN_CK (MTK_PIN_NO(29) | 3)
+#define MT8135_PIN_29_NLD12__FUNC_DAC_CK (MTK_PIN_NO(29) | 4)
+#define MT8135_PIN_29_NLD12__FUNC_PCM1_CK (MTK_PIN_NO(29) | 5)
+
+#define MT8135_PIN_30_NLD13__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define MT8135_PIN_30_NLD13__FUNC_NLD13 (MTK_PIN_NO(30) | 1)
+#define MT8135_PIN_30_NLD13__FUNC_EINT159 (MTK_PIN_NO(30) | 2)
+#define MT8135_PIN_30_NLD13__FUNC_I2SIN_WS (MTK_PIN_NO(30) | 3)
+#define MT8135_PIN_30_NLD13__FUNC_DAC_WS (MTK_PIN_NO(30) | 4)
+#define MT8135_PIN_30_NLD13__FUNC_PCM1_WS (MTK_PIN_NO(30) | 5)
+
+#define MT8135_PIN_31_NLD14__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define MT8135_PIN_31_NLD14__FUNC_NLD14 (MTK_PIN_NO(31) | 1)
+#define MT8135_PIN_31_NLD14__FUNC_EINT160 (MTK_PIN_NO(31) | 2)
+#define MT8135_PIN_31_NLD14__FUNC_I2SOUT_DAT (MTK_PIN_NO(31) | 3)
+#define MT8135_PIN_31_NLD14__FUNC_DAC_DAT_OUT (MTK_PIN_NO(31) | 4)
+#define MT8135_PIN_31_NLD14__FUNC_PCM1_DO (MTK_PIN_NO(31) | 5)
+
+#define MT8135_PIN_32_NLD15__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define MT8135_PIN_32_NLD15__FUNC_NLD15 (MTK_PIN_NO(32) | 1)
+#define MT8135_PIN_32_NLD15__FUNC_EINT161 (MTK_PIN_NO(32) | 2)
+#define MT8135_PIN_32_NLD15__FUNC_DISP_PWM (MTK_PIN_NO(32) | 3)
+#define MT8135_PIN_32_NLD15__FUNC_PWM4 (MTK_PIN_NO(32) | 4)
+#define MT8135_PIN_32_NLD15__FUNC_PCM1_DI (MTK_PIN_NO(32) | 5)
+
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_MSDC0_RSTB (MTK_PIN_NO(33) | 1)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_EINT50 (MTK_PIN_NO(33) | 2)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_I2SIN_DAT (MTK_PIN_NO(33) | 3)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_PCM1_DI (MTK_PIN_NO(33) | 5)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_SPI1_MI (MTK_PIN_NO(33) | 6)
+#define MT8135_PIN_33_MSDC0_RSTB__FUNC_NLD10 (MTK_PIN_NO(33) | 7)
+
+#define MT8135_PIN_34_IDDIG__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define MT8135_PIN_34_IDDIG__FUNC_IDDIG (MTK_PIN_NO(34) | 1)
+#define MT8135_PIN_34_IDDIG__FUNC_EINT34 (MTK_PIN_NO(34) | 2)
+
+#define MT8135_PIN_35_SCL3__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define MT8135_PIN_35_SCL3__FUNC_SCL3 (MTK_PIN_NO(35) | 1)
+#define MT8135_PIN_35_SCL3__FUNC_EINT96 (MTK_PIN_NO(35) | 2)
+#define MT8135_PIN_35_SCL3__FUNC_CLKM6 (MTK_PIN_NO(35) | 3)
+#define MT8135_PIN_35_SCL3__FUNC_PWM6 (MTK_PIN_NO(35) | 4)
+
+#define MT8135_PIN_36_SDA3__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define MT8135_PIN_36_SDA3__FUNC_SDA3 (MTK_PIN_NO(36) | 1)
+#define MT8135_PIN_36_SDA3__FUNC_EINT97 (MTK_PIN_NO(36) | 2)
+
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_AUD_CLK (MTK_PIN_NO(37) | 1)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_ADC_CK (MTK_PIN_NO(37) | 2)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_HDMI_SDATA0 (MTK_PIN_NO(37) | 3)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_EINT19 (MTK_PIN_NO(37) | 4)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_USB_TEST_IO_6 (MTK_PIN_NO(37) | 5)
+#define MT8135_PIN_37_AUD_CLK_MOSI__FUNC_TESTA_OUT19 (MTK_PIN_NO(37) | 7)
+
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(38) | 1)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_ADC_WS (MTK_PIN_NO(38) | 2)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_AUD_DAT_MISO (MTK_PIN_NO(38) | 3)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_EINT21 (MTK_PIN_NO(38) | 4)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_USB_TEST_IO_7 (MTK_PIN_NO(38) | 5)
+#define MT8135_PIN_38_AUD_DAT_MOSI__FUNC_TESTA_OUT20 (MTK_PIN_NO(38) | 7)
+
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MISO (MTK_PIN_NO(39) | 1)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_ADC_DAT_IN (MTK_PIN_NO(39) | 2)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_AUD_DAT_MOSI (MTK_PIN_NO(39) | 3)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_EINT20 (MTK_PIN_NO(39) | 4)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_USB_TEST_IO_8 (MTK_PIN_NO(39) | 5)
+#define MT8135_PIN_39_AUD_DAT_MISO__FUNC_TESTA_OUT21 (MTK_PIN_NO(39) | 7)
+
+#define MT8135_PIN_40_DAC_CLK__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define MT8135_PIN_40_DAC_CLK__FUNC_DAC_CK (MTK_PIN_NO(40) | 1)
+#define MT8135_PIN_40_DAC_CLK__FUNC_EINT22 (MTK_PIN_NO(40) | 2)
+#define MT8135_PIN_40_DAC_CLK__FUNC_HDMI_SDATA1 (MTK_PIN_NO(40) | 3)
+#define MT8135_PIN_40_DAC_CLK__FUNC_USB_TEST_IO_9 (MTK_PIN_NO(40) | 5)
+#define MT8135_PIN_40_DAC_CLK__FUNC_TESTA_OUT22 (MTK_PIN_NO(40) | 7)
+
+#define MT8135_PIN_41_DAC_WS__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define MT8135_PIN_41_DAC_WS__FUNC_DAC_WS (MTK_PIN_NO(41) | 1)
+#define MT8135_PIN_41_DAC_WS__FUNC_EINT24 (MTK_PIN_NO(41) | 2)
+#define MT8135_PIN_41_DAC_WS__FUNC_HDMI_SDATA2 (MTK_PIN_NO(41) | 3)
+#define MT8135_PIN_41_DAC_WS__FUNC_USB_TEST_IO_10 (MTK_PIN_NO(41) | 5)
+#define MT8135_PIN_41_DAC_WS__FUNC_TESTA_OUT23 (MTK_PIN_NO(41) | 7)
+
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(42) | 1)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_EINT23 (MTK_PIN_NO(42) | 2)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_HDMI_SDATA3 (MTK_PIN_NO(42) | 3)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_USB_TEST_IO_11 (MTK_PIN_NO(42) | 5)
+#define MT8135_PIN_42_DAC_DAT_OUT__FUNC_TESTA_OUT24 (MTK_PIN_NO(42) | 7)
+
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_PWRAP_SPIDI (MTK_PIN_NO(43) | 1)
+#define MT8135_PIN_43_PWRAP_SPI0_MO__FUNC_EINT29 (MTK_PIN_NO(43) | 2)
+
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_PWRAP_SPIDO (MTK_PIN_NO(44) | 1)
+#define MT8135_PIN_44_PWRAP_SPI0_MI__FUNC_EINT28 (MTK_PIN_NO(44) | 2)
+
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_PWRAP_SPICS_B_I (MTK_PIN_NO(45) | 1)
+#define MT8135_PIN_45_PWRAP_SPI0_CSN__FUNC_EINT27 (MTK_PIN_NO(45) | 2)
+
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_PWRAP_SPICK_I (MTK_PIN_NO(46) | 1)
+#define MT8135_PIN_46_PWRAP_SPI0_CLK__FUNC_EINT26 (MTK_PIN_NO(46) | 2)
+
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_PWRAP_EVENT_IN (MTK_PIN_NO(47) | 1)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_EINT25 (MTK_PIN_NO(47) | 2)
+#define MT8135_PIN_47_PWRAP_EVENT__FUNC_TESTA_OUT2 (MTK_PIN_NO(47) | 7)
+
+#define MT8135_PIN_48_RTC32K_CK__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define MT8135_PIN_48_RTC32K_CK__FUNC_RTC32K_CK (MTK_PIN_NO(48) | 1)
+
+#define MT8135_PIN_49_WATCHDOG__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define MT8135_PIN_49_WATCHDOG__FUNC_WATCHDOG (MTK_PIN_NO(49) | 1)
+#define MT8135_PIN_49_WATCHDOG__FUNC_EINT36 (MTK_PIN_NO(49) | 2)
+
+#define MT8135_PIN_50_SRCLKENA__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define MT8135_PIN_50_SRCLKENA__FUNC_SRCLKENA (MTK_PIN_NO(50) | 1)
+#define MT8135_PIN_50_SRCLKENA__FUNC_EINT38 (MTK_PIN_NO(50) | 2)
+
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_SRCVOLTEN (MTK_PIN_NO(51) | 1)
+#define MT8135_PIN_51_SRCVOLTEN__FUNC_EINT37 (MTK_PIN_NO(51) | 2)
+
+#define MT8135_PIN_52_EINT0__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define MT8135_PIN_52_EINT0__FUNC_EINT0 (MTK_PIN_NO(52) | 1)
+#define MT8135_PIN_52_EINT0__FUNC_PWM1 (MTK_PIN_NO(52) | 2)
+#define MT8135_PIN_52_EINT0__FUNC_CLKM0 (MTK_PIN_NO(52) | 3)
+#define MT8135_PIN_52_EINT0__FUNC_SPDIF_OUT (MTK_PIN_NO(52) | 4)
+#define MT8135_PIN_52_EINT0__FUNC_USB_TEST_IO_12 (MTK_PIN_NO(52) | 5)
+#define MT8135_PIN_52_EINT0__FUNC_USB_SCL (MTK_PIN_NO(52) | 7)
+
+#define MT8135_PIN_53_URXD2__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define MT8135_PIN_53_URXD2__FUNC_URXD2 (MTK_PIN_NO(53) | 1)
+#define MT8135_PIN_53_URXD2__FUNC_EINT83 (MTK_PIN_NO(53) | 2)
+#define MT8135_PIN_53_URXD2__FUNC_HDMI_LRCK (MTK_PIN_NO(53) | 4)
+#define MT8135_PIN_53_URXD2__FUNC_CLKM3 (MTK_PIN_NO(53) | 5)
+#define MT8135_PIN_53_URXD2__FUNC_UTXD2 (MTK_PIN_NO(53) | 7)
+
+#define MT8135_PIN_54_UTXD2__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define MT8135_PIN_54_UTXD2__FUNC_UTXD2 (MTK_PIN_NO(54) | 1)
+#define MT8135_PIN_54_UTXD2__FUNC_EINT82 (MTK_PIN_NO(54) | 2)
+#define MT8135_PIN_54_UTXD2__FUNC_HDMI_BCK_OUT (MTK_PIN_NO(54) | 4)
+#define MT8135_PIN_54_UTXD2__FUNC_CLKM2 (MTK_PIN_NO(54) | 5)
+#define MT8135_PIN_54_UTXD2__FUNC_URXD2 (MTK_PIN_NO(54) | 7)
+
+#define MT8135_PIN_55_UCTS2__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define MT8135_PIN_55_UCTS2__FUNC_UCTS2 (MTK_PIN_NO(55) | 1)
+#define MT8135_PIN_55_UCTS2__FUNC_EINT84 (MTK_PIN_NO(55) | 2)
+#define MT8135_PIN_55_UCTS2__FUNC_PWM1 (MTK_PIN_NO(55) | 5)
+#define MT8135_PIN_55_UCTS2__FUNC_URTS2 (MTK_PIN_NO(55) | 7)
+
+#define MT8135_PIN_56_URTS2__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define MT8135_PIN_56_URTS2__FUNC_URTS2 (MTK_PIN_NO(56) | 1)
+#define MT8135_PIN_56_URTS2__FUNC_EINT85 (MTK_PIN_NO(56) | 2)
+#define MT8135_PIN_56_URTS2__FUNC_PWM2 (MTK_PIN_NO(56) | 5)
+#define MT8135_PIN_56_URTS2__FUNC_UCTS2 (MTK_PIN_NO(56) | 7)
+
+#define MT8135_PIN_57_JTCK__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define MT8135_PIN_57_JTCK__FUNC_JTCK (MTK_PIN_NO(57) | 1)
+#define MT8135_PIN_57_JTCK__FUNC_EINT188 (MTK_PIN_NO(57) | 2)
+#define MT8135_PIN_57_JTCK__FUNC_DSP1_ICK (MTK_PIN_NO(57) | 3)
+
+#define MT8135_PIN_58_JTDO__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define MT8135_PIN_58_JTDO__FUNC_JTDO (MTK_PIN_NO(58) | 1)
+#define MT8135_PIN_58_JTDO__FUNC_EINT190 (MTK_PIN_NO(58) | 2)
+#define MT8135_PIN_58_JTDO__FUNC_DSP2_IMS (MTK_PIN_NO(58) | 3)
+
+#define MT8135_PIN_59_JTRST_B__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define MT8135_PIN_59_JTRST_B__FUNC_JTRST_B (MTK_PIN_NO(59) | 1)
+#define MT8135_PIN_59_JTRST_B__FUNC_EINT0 (MTK_PIN_NO(59) | 2)
+#define MT8135_PIN_59_JTRST_B__FUNC_DSP2_ICK (MTK_PIN_NO(59) | 3)
+
+#define MT8135_PIN_60_JTDI__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define MT8135_PIN_60_JTDI__FUNC_JTDI (MTK_PIN_NO(60) | 1)
+#define MT8135_PIN_60_JTDI__FUNC_EINT189 (MTK_PIN_NO(60) | 2)
+#define MT8135_PIN_60_JTDI__FUNC_DSP1_IMS (MTK_PIN_NO(60) | 3)
+
+#define MT8135_PIN_61_JRTCK__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define MT8135_PIN_61_JRTCK__FUNC_JRTCK (MTK_PIN_NO(61) | 1)
+#define MT8135_PIN_61_JRTCK__FUNC_EINT187 (MTK_PIN_NO(61) | 2)
+#define MT8135_PIN_61_JRTCK__FUNC_DSP1_ID (MTK_PIN_NO(61) | 3)
+
+#define MT8135_PIN_62_JTMS__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define MT8135_PIN_62_JTMS__FUNC_JTMS (MTK_PIN_NO(62) | 1)
+#define MT8135_PIN_62_JTMS__FUNC_EINT191 (MTK_PIN_NO(62) | 2)
+#define MT8135_PIN_62_JTMS__FUNC_DSP2_ID (MTK_PIN_NO(62) | 3)
+
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_MSDC1_INSI (MTK_PIN_NO(63) | 1)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_SCL5 (MTK_PIN_NO(63) | 3)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_PWM6 (MTK_PIN_NO(63) | 4)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_CLKM5 (MTK_PIN_NO(63) | 5)
+#define MT8135_PIN_63_MSDC1_INSI__FUNC_TESTB_OUT6 (MTK_PIN_NO(63) | 7)
+
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_MSDC1_SDWPI (MTK_PIN_NO(64) | 1)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_EINT58 (MTK_PIN_NO(64) | 2)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_SDA5 (MTK_PIN_NO(64) | 3)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_PWM7 (MTK_PIN_NO(64) | 4)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_CLKM6 (MTK_PIN_NO(64) | 5)
+#define MT8135_PIN_64_MSDC1_SDWPI__FUNC_TESTB_OUT7 (MTK_PIN_NO(64) | 7)
+
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_MSDC2_INSI (MTK_PIN_NO(65) | 1)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_USB_TEST_IO_27 (MTK_PIN_NO(65) | 5)
+#define MT8135_PIN_65_MSDC2_INSI__FUNC_TESTA_OUT3 (MTK_PIN_NO(65) | 7)
+
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_MSDC2_SDWPI (MTK_PIN_NO(66) | 1)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_EINT66 (MTK_PIN_NO(66) | 2)
+#define MT8135_PIN_66_MSDC2_SDWPI__FUNC_USB_TEST_IO_28 (MTK_PIN_NO(66) | 5)
+
+#define MT8135_PIN_67_URXD4__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define MT8135_PIN_67_URXD4__FUNC_URXD4 (MTK_PIN_NO(67) | 1)
+#define MT8135_PIN_67_URXD4__FUNC_EINT89 (MTK_PIN_NO(67) | 2)
+#define MT8135_PIN_67_URXD4__FUNC_URXD1 (MTK_PIN_NO(67) | 3)
+#define MT8135_PIN_67_URXD4__FUNC_UTXD4 (MTK_PIN_NO(67) | 6)
+#define MT8135_PIN_67_URXD4__FUNC_TESTB_OUT10 (MTK_PIN_NO(67) | 7)
+
+#define MT8135_PIN_68_UTXD4__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD4 (MTK_PIN_NO(68) | 1)
+#define MT8135_PIN_68_UTXD4__FUNC_EINT88 (MTK_PIN_NO(68) | 2)
+#define MT8135_PIN_68_UTXD4__FUNC_UTXD1 (MTK_PIN_NO(68) | 3)
+#define MT8135_PIN_68_UTXD4__FUNC_URXD4 (MTK_PIN_NO(68) | 6)
+#define MT8135_PIN_68_UTXD4__FUNC_TESTB_OUT11 (MTK_PIN_NO(68) | 7)
+
+#define MT8135_PIN_69_URXD1__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define MT8135_PIN_69_URXD1__FUNC_URXD1 (MTK_PIN_NO(69) | 1)
+#define MT8135_PIN_69_URXD1__FUNC_EINT79 (MTK_PIN_NO(69) | 2)
+#define MT8135_PIN_69_URXD1__FUNC_URXD4 (MTK_PIN_NO(69) | 3)
+#define MT8135_PIN_69_URXD1__FUNC_UTXD1 (MTK_PIN_NO(69) | 6)
+#define MT8135_PIN_69_URXD1__FUNC_TESTB_OUT24 (MTK_PIN_NO(69) | 7)
+
+#define MT8135_PIN_70_UTXD1__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD1 (MTK_PIN_NO(70) | 1)
+#define MT8135_PIN_70_UTXD1__FUNC_EINT78 (MTK_PIN_NO(70) | 2)
+#define MT8135_PIN_70_UTXD1__FUNC_UTXD4 (MTK_PIN_NO(70) | 3)
+#define MT8135_PIN_70_UTXD1__FUNC_URXD1 (MTK_PIN_NO(70) | 6)
+#define MT8135_PIN_70_UTXD1__FUNC_TESTB_OUT25 (MTK_PIN_NO(70) | 7)
+
+#define MT8135_PIN_71_UCTS1__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define MT8135_PIN_71_UCTS1__FUNC_UCTS1 (MTK_PIN_NO(71) | 1)
+#define MT8135_PIN_71_UCTS1__FUNC_EINT80 (MTK_PIN_NO(71) | 2)
+#define MT8135_PIN_71_UCTS1__FUNC_CLKM0 (MTK_PIN_NO(71) | 5)
+#define MT8135_PIN_71_UCTS1__FUNC_URTS1 (MTK_PIN_NO(71) | 6)
+#define MT8135_PIN_71_UCTS1__FUNC_TESTB_OUT31 (MTK_PIN_NO(71) | 7)
+
+#define MT8135_PIN_72_URTS1__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define MT8135_PIN_72_URTS1__FUNC_URTS1 (MTK_PIN_NO(72) | 1)
+#define MT8135_PIN_72_URTS1__FUNC_EINT81 (MTK_PIN_NO(72) | 2)
+#define MT8135_PIN_72_URTS1__FUNC_CLKM1 (MTK_PIN_NO(72) | 5)
+#define MT8135_PIN_72_URTS1__FUNC_UCTS1 (MTK_PIN_NO(72) | 6)
+#define MT8135_PIN_72_URTS1__FUNC_TESTB_OUT21 (MTK_PIN_NO(72) | 7)
+
+#define MT8135_PIN_73_PWM1__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define MT8135_PIN_73_PWM1__FUNC_PWM1 (MTK_PIN_NO(73) | 1)
+#define MT8135_PIN_73_PWM1__FUNC_EINT73 (MTK_PIN_NO(73) | 2)
+#define MT8135_PIN_73_PWM1__FUNC_USB_DRVVBUS (MTK_PIN_NO(73) | 5)
+#define MT8135_PIN_73_PWM1__FUNC_DISP_PWM (MTK_PIN_NO(73) | 6)
+#define MT8135_PIN_73_PWM1__FUNC_TESTB_OUT8 (MTK_PIN_NO(73) | 7)
+
+#define MT8135_PIN_74_PWM2__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define MT8135_PIN_74_PWM2__FUNC_PWM2 (MTK_PIN_NO(74) | 1)
+#define MT8135_PIN_74_PWM2__FUNC_EINT74 (MTK_PIN_NO(74) | 2)
+#define MT8135_PIN_74_PWM2__FUNC_DPI33_CK (MTK_PIN_NO(74) | 3)
+#define MT8135_PIN_74_PWM2__FUNC_PWM5 (MTK_PIN_NO(74) | 4)
+#define MT8135_PIN_74_PWM2__FUNC_URXD2 (MTK_PIN_NO(74) | 5)
+#define MT8135_PIN_74_PWM2__FUNC_DISP_PWM (MTK_PIN_NO(74) | 6)
+#define MT8135_PIN_74_PWM2__FUNC_TESTB_OUT9 (MTK_PIN_NO(74) | 7)
+
+#define MT8135_PIN_75_PWM3__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define MT8135_PIN_75_PWM3__FUNC_PWM3 (MTK_PIN_NO(75) | 1)
+#define MT8135_PIN_75_PWM3__FUNC_EINT75 (MTK_PIN_NO(75) | 2)
+#define MT8135_PIN_75_PWM3__FUNC_DPI33_D0 (MTK_PIN_NO(75) | 3)
+#define MT8135_PIN_75_PWM3__FUNC_PWM6 (MTK_PIN_NO(75) | 4)
+#define MT8135_PIN_75_PWM3__FUNC_UTXD2 (MTK_PIN_NO(75) | 5)
+#define MT8135_PIN_75_PWM3__FUNC_DISP_PWM (MTK_PIN_NO(75) | 6)
+#define MT8135_PIN_75_PWM3__FUNC_TESTB_OUT12 (MTK_PIN_NO(75) | 7)
+
+#define MT8135_PIN_76_PWM4__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define MT8135_PIN_76_PWM4__FUNC_PWM4 (MTK_PIN_NO(76) | 1)
+#define MT8135_PIN_76_PWM4__FUNC_EINT76 (MTK_PIN_NO(76) | 2)
+#define MT8135_PIN_76_PWM4__FUNC_DPI33_D1 (MTK_PIN_NO(76) | 3)
+#define MT8135_PIN_76_PWM4__FUNC_PWM7 (MTK_PIN_NO(76) | 4)
+#define MT8135_PIN_76_PWM4__FUNC_DISP_PWM (MTK_PIN_NO(76) | 6)
+#define MT8135_PIN_76_PWM4__FUNC_TESTB_OUT13 (MTK_PIN_NO(76) | 7)
+
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_MSDC2_DAT2 (MTK_PIN_NO(77) | 1)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_EINT63 (MTK_PIN_NO(77) | 2)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DSP2_IMS (MTK_PIN_NO(77) | 4)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_DPI33_D6 (MTK_PIN_NO(77) | 6)
+#define MT8135_PIN_77_MSDC2_DAT2__FUNC_TESTA_OUT25 (MTK_PIN_NO(77) | 7)
+
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_MSDC2_DAT3 (MTK_PIN_NO(78) | 1)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_EINT64 (MTK_PIN_NO(78) | 2)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DSP2_ID (MTK_PIN_NO(78) | 4)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_DPI33_D7 (MTK_PIN_NO(78) | 6)
+#define MT8135_PIN_78_MSDC2_DAT3__FUNC_TESTA_OUT26 (MTK_PIN_NO(78) | 7)
+
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_MSDC2_CMD (MTK_PIN_NO(79) | 1)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_EINT60 (MTK_PIN_NO(79) | 2)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DSP1_IMS (MTK_PIN_NO(79) | 4)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_PCM1_WS (MTK_PIN_NO(79) | 5)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_DPI33_D3 (MTK_PIN_NO(79) | 6)
+#define MT8135_PIN_79_MSDC2_CMD__FUNC_TESTA_OUT0 (MTK_PIN_NO(79) | 7)
+
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_MSDC2_CLK (MTK_PIN_NO(80) | 1)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_EINT59 (MTK_PIN_NO(80) | 2)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DSP1_ICK (MTK_PIN_NO(80) | 4)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_PCM1_CK (MTK_PIN_NO(80) | 5)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_DPI33_D2 (MTK_PIN_NO(80) | 6)
+#define MT8135_PIN_80_MSDC2_CLK__FUNC_TESTA_OUT1 (MTK_PIN_NO(80) | 7)
+
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_MSDC2_DAT1 (MTK_PIN_NO(81) | 1)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_EINT62 (MTK_PIN_NO(81) | 2)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DSP2_ICK (MTK_PIN_NO(81) | 4)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_PCM1_DO (MTK_PIN_NO(81) | 5)
+#define MT8135_PIN_81_MSDC2_DAT1__FUNC_DPI33_D5 (MTK_PIN_NO(81) | 6)
+
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_MSDC2_DAT0 (MTK_PIN_NO(82) | 1)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_EINT61 (MTK_PIN_NO(82) | 2)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DSP1_ID (MTK_PIN_NO(82) | 4)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_PCM1_DI (MTK_PIN_NO(82) | 5)
+#define MT8135_PIN_82_MSDC2_DAT0__FUNC_DPI33_D4 (MTK_PIN_NO(82) | 6)
+
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_MSDC1_DAT0 (MTK_PIN_NO(83) | 1)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_EINT53 (MTK_PIN_NO(83) | 2)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_SCL1 (MTK_PIN_NO(83) | 3)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_PWM2 (MTK_PIN_NO(83) | 4)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_CLKM1 (MTK_PIN_NO(83) | 5)
+#define MT8135_PIN_83_MSDC1_DAT0__FUNC_TESTB_OUT2 (MTK_PIN_NO(83) | 7)
+
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_MSDC1_DAT1 (MTK_PIN_NO(84) | 1)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_EINT54 (MTK_PIN_NO(84) | 2)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_SDA1 (MTK_PIN_NO(84) | 3)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_PWM3 (MTK_PIN_NO(84) | 4)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_CLKM2 (MTK_PIN_NO(84) | 5)
+#define MT8135_PIN_84_MSDC1_DAT1__FUNC_TESTB_OUT3 (MTK_PIN_NO(84) | 7)
+
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_MSDC1_CMD (MTK_PIN_NO(85) | 1)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_EINT52 (MTK_PIN_NO(85) | 2)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_SDA0 (MTK_PIN_NO(85) | 3)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_PWM1 (MTK_PIN_NO(85) | 4)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_CLKM0 (MTK_PIN_NO(85) | 5)
+#define MT8135_PIN_85_MSDC1_CMD__FUNC_TESTB_OUT1 (MTK_PIN_NO(85) | 7)
+
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_MSDC1_CLK (MTK_PIN_NO(86) | 1)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_EINT51 (MTK_PIN_NO(86) | 2)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_SCL0 (MTK_PIN_NO(86) | 3)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_DISP_PWM (MTK_PIN_NO(86) | 4)
+#define MT8135_PIN_86_MSDC1_CLK__FUNC_TESTB_OUT0 (MTK_PIN_NO(86) | 7)
+
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_MSDC1_DAT2 (MTK_PIN_NO(87) | 1)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_EINT55 (MTK_PIN_NO(87) | 2)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_SCL4 (MTK_PIN_NO(87) | 3)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_PWM4 (MTK_PIN_NO(87) | 4)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_CLKM3 (MTK_PIN_NO(87) | 5)
+#define MT8135_PIN_87_MSDC1_DAT2__FUNC_TESTB_OUT4 (MTK_PIN_NO(87) | 7)
+
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_MSDC1_DAT3 (MTK_PIN_NO(88) | 1)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_EINT56 (MTK_PIN_NO(88) | 2)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_SDA4 (MTK_PIN_NO(88) | 3)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_PWM5 (MTK_PIN_NO(88) | 4)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_CLKM4 (MTK_PIN_NO(88) | 5)
+#define MT8135_PIN_88_MSDC1_DAT3__FUNC_TESTB_OUT5 (MTK_PIN_NO(88) | 7)
+
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_MSDC4_DAT0 (MTK_PIN_NO(89) | 1)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EINT133 (MTK_PIN_NO(89) | 2)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(89) | 4)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_USB_DRVVBUS (MTK_PIN_NO(89) | 5)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_A_FUNC_DIN_9 (MTK_PIN_NO(89) | 6)
+#define MT8135_PIN_89_MSDC4_DAT0__FUNC_LPTE (MTK_PIN_NO(89) | 7)
+
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_MSDC4_DAT1 (MTK_PIN_NO(90) | 1)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_EINT134 (MTK_PIN_NO(90) | 2)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_A_FUNC_DIN_10 (MTK_PIN_NO(90) | 6)
+#define MT8135_PIN_90_MSDC4_DAT1__FUNC_LRSTB_1X (MTK_PIN_NO(90) | 7)
+
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_MSDC4_DAT5 (MTK_PIN_NO(91) | 1)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_EINT136 (MTK_PIN_NO(91) | 2)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_I2SIN_WS (MTK_PIN_NO(91) | 3)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_DAC_WS (MTK_PIN_NO(91) | 4)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_PCM1_WS (MTK_PIN_NO(91) | 5)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_A_FUNC_DIN_11 (MTK_PIN_NO(91) | 6)
+#define MT8135_PIN_91_MSDC4_DAT5__FUNC_SPI1_CSN (MTK_PIN_NO(91) | 7)
+
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_MSDC4_DAT6 (MTK_PIN_NO(92) | 1)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_EINT137 (MTK_PIN_NO(92) | 2)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_I2SOUT_DAT (MTK_PIN_NO(92) | 3)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_DAC_DAT_OUT (MTK_PIN_NO(92) | 4)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_PCM1_DO (MTK_PIN_NO(92) | 5)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_A_FUNC_DIN_12 (MTK_PIN_NO(92) | 6)
+#define MT8135_PIN_92_MSDC4_DAT6__FUNC_SPI1_MO (MTK_PIN_NO(92) | 7)
+
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_MSDC4_DAT7 (MTK_PIN_NO(93) | 1)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_EINT138 (MTK_PIN_NO(93) | 2)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_I2SIN_DAT (MTK_PIN_NO(93) | 3)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_PCM1_DI (MTK_PIN_NO(93) | 5)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_A_FUNC_DIN_13 (MTK_PIN_NO(93) | 6)
+#define MT8135_PIN_93_MSDC4_DAT7__FUNC_SPI1_MI (MTK_PIN_NO(93) | 7)
+
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_MSDC4_DAT4 (MTK_PIN_NO(94) | 1)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_EINT135 (MTK_PIN_NO(94) | 2)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_I2SIN_CK (MTK_PIN_NO(94) | 3)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_DAC_CK (MTK_PIN_NO(94) | 4)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_PCM1_CK (MTK_PIN_NO(94) | 5)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_A_FUNC_DIN_14 (MTK_PIN_NO(94) | 6)
+#define MT8135_PIN_94_MSDC4_DAT4__FUNC_SPI1_CLK (MTK_PIN_NO(94) | 7)
+
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_MSDC4_DAT2 (MTK_PIN_NO(95) | 1)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_EINT131 (MTK_PIN_NO(95) | 2)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_I2SIN_WS (MTK_PIN_NO(95) | 3)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_CM2PDN_2X (MTK_PIN_NO(95) | 4)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_DAC_WS (MTK_PIN_NO(95) | 5)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_PCM1_WS (MTK_PIN_NO(95) | 6)
+#define MT8135_PIN_95_MSDC4_DAT2__FUNC_LSCE0B_1X (MTK_PIN_NO(95) | 7)
+
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_MSDC4_CLK (MTK_PIN_NO(96) | 1)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_EINT129 (MTK_PIN_NO(96) | 2)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_DPI1_CK_2X (MTK_PIN_NO(96) | 3)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_CM2PCLK_2X (MTK_PIN_NO(96) | 4)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PWM4 (MTK_PIN_NO(96) | 5)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_PCM1_DI (MTK_PIN_NO(96) | 6)
+#define MT8135_PIN_96_MSDC4_CLK__FUNC_LSCK_1X (MTK_PIN_NO(96) | 7)
+
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_MSDC4_DAT3 (MTK_PIN_NO(97) | 1)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_EINT132 (MTK_PIN_NO(97) | 2)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_I2SOUT_DAT (MTK_PIN_NO(97) | 3)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_CM2RST_2X (MTK_PIN_NO(97) | 4)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_DAC_DAT_OUT (MTK_PIN_NO(97) | 5)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_PCM1_DO (MTK_PIN_NO(97) | 6)
+#define MT8135_PIN_97_MSDC4_DAT3__FUNC_LSCE1B_1X (MTK_PIN_NO(97) | 7)
+
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_MSDC4_CMD (MTK_PIN_NO(98) | 1)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_EINT128 (MTK_PIN_NO(98) | 2)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_DPI1_DE_2X (MTK_PIN_NO(98) | 3)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_PWM3 (MTK_PIN_NO(98) | 5)
+#define MT8135_PIN_98_MSDC4_CMD__FUNC_LSDA_1X (MTK_PIN_NO(98) | 7)
+
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_MSDC4_RSTB (MTK_PIN_NO(99) | 1)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_EINT130 (MTK_PIN_NO(99) | 2)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_I2SIN_CK (MTK_PIN_NO(99) | 3)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_CM2MCLK_2X (MTK_PIN_NO(99) | 4)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_DAC_CK (MTK_PIN_NO(99) | 5)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_PCM1_CK (MTK_PIN_NO(99) | 6)
+#define MT8135_PIN_99_MSDC4_RSTB__FUNC_LSA0_1X (MTK_PIN_NO(99) | 7)
+
+#define MT8135_PIN_100_SDA0__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define MT8135_PIN_100_SDA0__FUNC_SDA0 (MTK_PIN_NO(100) | 1)
+#define MT8135_PIN_100_SDA0__FUNC_EINT91 (MTK_PIN_NO(100) | 2)
+#define MT8135_PIN_100_SDA0__FUNC_CLKM1 (MTK_PIN_NO(100) | 3)
+#define MT8135_PIN_100_SDA0__FUNC_PWM1 (MTK_PIN_NO(100) | 4)
+#define MT8135_PIN_100_SDA0__FUNC_A_FUNC_DIN_15 (MTK_PIN_NO(100) | 7)
+
+#define MT8135_PIN_101_SCL0__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define MT8135_PIN_101_SCL0__FUNC_SCL0 (MTK_PIN_NO(101) | 1)
+#define MT8135_PIN_101_SCL0__FUNC_EINT90 (MTK_PIN_NO(101) | 2)
+#define MT8135_PIN_101_SCL0__FUNC_CLKM0 (MTK_PIN_NO(101) | 3)
+#define MT8135_PIN_101_SCL0__FUNC_DISP_PWM (MTK_PIN_NO(101) | 4)
+#define MT8135_PIN_101_SCL0__FUNC_A_FUNC_DIN_16 (MTK_PIN_NO(101) | 7)
+
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_EINT10 (MTK_PIN_NO(102) | 1)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_USB_TEST_IO_16 (MTK_PIN_NO(102) | 5)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_TESTB_OUT16 (MTK_PIN_NO(102) | 6)
+#define MT8135_PIN_102_EINT10_AUXIN2__FUNC_A_FUNC_DIN_17 (MTK_PIN_NO(102) | 7)
+
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_EINT11 (MTK_PIN_NO(103) | 1)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_USB_TEST_IO_17 (MTK_PIN_NO(103) | 5)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_TESTB_OUT17 (MTK_PIN_NO(103) | 6)
+#define MT8135_PIN_103_EINT11_AUXIN3__FUNC_A_FUNC_DIN_18 (MTK_PIN_NO(103) | 7)
+
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_EINT16 (MTK_PIN_NO(104) | 1)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_USB_TEST_IO_18 (MTK_PIN_NO(104) | 5)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_TESTB_OUT18 (MTK_PIN_NO(104) | 6)
+#define MT8135_PIN_104_EINT16_AUXIN4__FUNC_A_FUNC_DIN_19 (MTK_PIN_NO(104) | 7)
+
+#define MT8135_PIN_105_I2S_CLK__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define MT8135_PIN_105_I2S_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(105) | 1)
+#define MT8135_PIN_105_I2S_CLK__FUNC_EINT10 (MTK_PIN_NO(105) | 2)
+#define MT8135_PIN_105_I2S_CLK__FUNC_DAC_CK (MTK_PIN_NO(105) | 3)
+#define MT8135_PIN_105_I2S_CLK__FUNC_PCM1_CK (MTK_PIN_NO(105) | 4)
+#define MT8135_PIN_105_I2S_CLK__FUNC_USB_TEST_IO_19 (MTK_PIN_NO(105) | 5)
+#define MT8135_PIN_105_I2S_CLK__FUNC_TESTB_OUT19 (MTK_PIN_NO(105) | 6)
+#define MT8135_PIN_105_I2S_CLK__FUNC_A_FUNC_DIN_20 (MTK_PIN_NO(105) | 7)
+
+#define MT8135_PIN_106_I2S_WS__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define MT8135_PIN_106_I2S_WS__FUNC_I2SIN_WS (MTK_PIN_NO(106) | 1)
+#define MT8135_PIN_106_I2S_WS__FUNC_EINT13 (MTK_PIN_NO(106) | 2)
+#define MT8135_PIN_106_I2S_WS__FUNC_DAC_WS (MTK_PIN_NO(106) | 3)
+#define MT8135_PIN_106_I2S_WS__FUNC_PCM1_WS (MTK_PIN_NO(106) | 4)
+#define MT8135_PIN_106_I2S_WS__FUNC_USB_TEST_IO_20 (MTK_PIN_NO(106) | 5)
+#define MT8135_PIN_106_I2S_WS__FUNC_TESTB_OUT20 (MTK_PIN_NO(106) | 6)
+#define MT8135_PIN_106_I2S_WS__FUNC_A_FUNC_DIN_21 (MTK_PIN_NO(106) | 7)
+
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_I2SIN_DAT (MTK_PIN_NO(107) | 1)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_EINT11 (MTK_PIN_NO(107) | 2)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_PCM1_DI (MTK_PIN_NO(107) | 4)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_USB_TEST_IO_21 (MTK_PIN_NO(107) | 5)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_TESTB_OUT22 (MTK_PIN_NO(107) | 6)
+#define MT8135_PIN_107_I2S_DATA_IN__FUNC_A_FUNC_DIN_22 (MTK_PIN_NO(107) | 7)
+
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_I2SOUT_DAT (MTK_PIN_NO(108) | 1)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_EINT12 (MTK_PIN_NO(108) | 2)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_DAC_DAT_OUT (MTK_PIN_NO(108) | 3)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_PCM1_DO (MTK_PIN_NO(108) | 4)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_USB_TEST_IO_22 (MTK_PIN_NO(108) | 5)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_TESTB_OUT23 (MTK_PIN_NO(108) | 6)
+#define MT8135_PIN_108_I2S_DATA_OUT__FUNC_A_FUNC_DIN_23 (MTK_PIN_NO(108) | 7)
+
+#define MT8135_PIN_109_EINT5__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define MT8135_PIN_109_EINT5__FUNC_EINT5 (MTK_PIN_NO(109) | 1)
+#define MT8135_PIN_109_EINT5__FUNC_PWM5 (MTK_PIN_NO(109) | 2)
+#define MT8135_PIN_109_EINT5__FUNC_CLKM3 (MTK_PIN_NO(109) | 3)
+#define MT8135_PIN_109_EINT5__FUNC_GPU_JTRSTB (MTK_PIN_NO(109) | 4)
+#define MT8135_PIN_109_EINT5__FUNC_USB_TEST_IO_23 (MTK_PIN_NO(109) | 5)
+#define MT8135_PIN_109_EINT5__FUNC_TESTB_OUT26 (MTK_PIN_NO(109) | 6)
+#define MT8135_PIN_109_EINT5__FUNC_A_FUNC_DIN_24 (MTK_PIN_NO(109) | 7)
+
+#define MT8135_PIN_110_EINT6__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define MT8135_PIN_110_EINT6__FUNC_EINT6 (MTK_PIN_NO(110) | 1)
+#define MT8135_PIN_110_EINT6__FUNC_PWM6 (MTK_PIN_NO(110) | 2)
+#define MT8135_PIN_110_EINT6__FUNC_CLKM4 (MTK_PIN_NO(110) | 3)
+#define MT8135_PIN_110_EINT6__FUNC_GPU_JTMS (MTK_PIN_NO(110) | 4)
+#define MT8135_PIN_110_EINT6__FUNC_USB_TEST_IO_24 (MTK_PIN_NO(110) | 5)
+#define MT8135_PIN_110_EINT6__FUNC_TESTB_OUT27 (MTK_PIN_NO(110) | 6)
+#define MT8135_PIN_110_EINT6__FUNC_A_FUNC_DIN_25 (MTK_PIN_NO(110) | 7)
+
+#define MT8135_PIN_111_EINT7__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define MT8135_PIN_111_EINT7__FUNC_EINT7 (MTK_PIN_NO(111) | 1)
+#define MT8135_PIN_111_EINT7__FUNC_PWM7 (MTK_PIN_NO(111) | 2)
+#define MT8135_PIN_111_EINT7__FUNC_CLKM5 (MTK_PIN_NO(111) | 3)
+#define MT8135_PIN_111_EINT7__FUNC_GPU_JTDO (MTK_PIN_NO(111) | 4)
+#define MT8135_PIN_111_EINT7__FUNC_USB_TEST_IO_25 (MTK_PIN_NO(111) | 5)
+#define MT8135_PIN_111_EINT7__FUNC_TESTB_OUT28 (MTK_PIN_NO(111) | 6)
+#define MT8135_PIN_111_EINT7__FUNC_A_FUNC_DIN_26 (MTK_PIN_NO(111) | 7)
+
+#define MT8135_PIN_112_EINT8__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define MT8135_PIN_112_EINT8__FUNC_EINT8 (MTK_PIN_NO(112) | 1)
+#define MT8135_PIN_112_EINT8__FUNC_DISP_PWM (MTK_PIN_NO(112) | 2)
+#define MT8135_PIN_112_EINT8__FUNC_CLKM6 (MTK_PIN_NO(112) | 3)
+#define MT8135_PIN_112_EINT8__FUNC_GPU_JTDI (MTK_PIN_NO(112) | 4)
+#define MT8135_PIN_112_EINT8__FUNC_USB_TEST_IO_26 (MTK_PIN_NO(112) | 5)
+#define MT8135_PIN_112_EINT8__FUNC_TESTB_OUT29 (MTK_PIN_NO(112) | 6)
+#define MT8135_PIN_112_EINT8__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(112) | 7)
+
+#define MT8135_PIN_113_EINT9__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define MT8135_PIN_113_EINT9__FUNC_EINT9 (MTK_PIN_NO(113) | 1)
+#define MT8135_PIN_113_EINT9__FUNC_GPU_JTCK (MTK_PIN_NO(113) | 4)
+#define MT8135_PIN_113_EINT9__FUNC_USB_DRVVBUS (MTK_PIN_NO(113) | 5)
+#define MT8135_PIN_113_EINT9__FUNC_TESTB_OUT30 (MTK_PIN_NO(113) | 6)
+#define MT8135_PIN_113_EINT9__FUNC_A_FUNC_DIN_27 (MTK_PIN_NO(113) | 7)
+
+#define MT8135_PIN_114_LPCE1B__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define MT8135_PIN_114_LPCE1B__FUNC_LPCE1B (MTK_PIN_NO(114) | 1)
+#define MT8135_PIN_114_LPCE1B__FUNC_EINT127 (MTK_PIN_NO(114) | 2)
+#define MT8135_PIN_114_LPCE1B__FUNC_PWM2 (MTK_PIN_NO(114) | 5)
+#define MT8135_PIN_114_LPCE1B__FUNC_TESTB_OUT14 (MTK_PIN_NO(114) | 6)
+#define MT8135_PIN_114_LPCE1B__FUNC_A_FUNC_DIN_28 (MTK_PIN_NO(114) | 7)
+
+#define MT8135_PIN_115_LPCE0B__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define MT8135_PIN_115_LPCE0B__FUNC_LPCE0B (MTK_PIN_NO(115) | 1)
+#define MT8135_PIN_115_LPCE0B__FUNC_EINT126 (MTK_PIN_NO(115) | 2)
+#define MT8135_PIN_115_LPCE0B__FUNC_PWM1 (MTK_PIN_NO(115) | 5)
+#define MT8135_PIN_115_LPCE0B__FUNC_TESTB_OUT15 (MTK_PIN_NO(115) | 6)
+#define MT8135_PIN_115_LPCE0B__FUNC_A_FUNC_DIN_29 (MTK_PIN_NO(115) | 7)
+
+#define MT8135_PIN_116_DISP_PWM__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define MT8135_PIN_116_DISP_PWM__FUNC_DISP_PWM (MTK_PIN_NO(116) | 1)
+#define MT8135_PIN_116_DISP_PWM__FUNC_EINT77 (MTK_PIN_NO(116) | 2)
+#define MT8135_PIN_116_DISP_PWM__FUNC_LSDI (MTK_PIN_NO(116) | 3)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM1 (MTK_PIN_NO(116) | 4)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM2 (MTK_PIN_NO(116) | 5)
+#define MT8135_PIN_116_DISP_PWM__FUNC_PWM3 (MTK_PIN_NO(116) | 7)
+
+#define MT8135_PIN_117_EINT1__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define MT8135_PIN_117_EINT1__FUNC_EINT1 (MTK_PIN_NO(117) | 1)
+#define MT8135_PIN_117_EINT1__FUNC_PWM2 (MTK_PIN_NO(117) | 2)
+#define MT8135_PIN_117_EINT1__FUNC_CLKM1 (MTK_PIN_NO(117) | 3)
+#define MT8135_PIN_117_EINT1__FUNC_USB_TEST_IO_13 (MTK_PIN_NO(117) | 5)
+#define MT8135_PIN_117_EINT1__FUNC_USB_SDA (MTK_PIN_NO(117) | 7)
+
+#define MT8135_PIN_118_EINT2__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define MT8135_PIN_118_EINT2__FUNC_EINT2 (MTK_PIN_NO(118) | 1)
+#define MT8135_PIN_118_EINT2__FUNC_PWM3 (MTK_PIN_NO(118) | 2)
+#define MT8135_PIN_118_EINT2__FUNC_CLKM2 (MTK_PIN_NO(118) | 3)
+#define MT8135_PIN_118_EINT2__FUNC_USB_TEST_IO_14 (MTK_PIN_NO(118) | 5)
+#define MT8135_PIN_118_EINT2__FUNC_SRCLKENAI2 (MTK_PIN_NO(118) | 6)
+#define MT8135_PIN_118_EINT2__FUNC_A_FUNC_DIN_30 (MTK_PIN_NO(118) | 7)
+
+#define MT8135_PIN_119_EINT3__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define MT8135_PIN_119_EINT3__FUNC_EINT3 (MTK_PIN_NO(119) | 1)
+#define MT8135_PIN_119_EINT3__FUNC_USB_TEST_IO_15 (MTK_PIN_NO(119) | 5)
+#define MT8135_PIN_119_EINT3__FUNC_SRCLKENAI1 (MTK_PIN_NO(119) | 6)
+#define MT8135_PIN_119_EINT3__FUNC_EXT_26M_CK (MTK_PIN_NO(119) | 7)
+
+#define MT8135_PIN_120_EINT4__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define MT8135_PIN_120_EINT4__FUNC_EINT4 (MTK_PIN_NO(120) | 1)
+#define MT8135_PIN_120_EINT4__FUNC_PWM4 (MTK_PIN_NO(120) | 2)
+#define MT8135_PIN_120_EINT4__FUNC_USB_DRVVBUS (MTK_PIN_NO(120) | 5)
+#define MT8135_PIN_120_EINT4__FUNC_A_FUNC_DIN_31 (MTK_PIN_NO(120) | 7)
+
+#define MT8135_PIN_121_DPIDE__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define MT8135_PIN_121_DPIDE__FUNC_DPI0_DE (MTK_PIN_NO(121) | 1)
+#define MT8135_PIN_121_DPIDE__FUNC_EINT100 (MTK_PIN_NO(121) | 2)
+#define MT8135_PIN_121_DPIDE__FUNC_I2SOUT_DAT (MTK_PIN_NO(121) | 3)
+#define MT8135_PIN_121_DPIDE__FUNC_DAC_DAT_OUT (MTK_PIN_NO(121) | 4)
+#define MT8135_PIN_121_DPIDE__FUNC_PCM1_DO (MTK_PIN_NO(121) | 5)
+#define MT8135_PIN_121_DPIDE__FUNC_IRDA_TXD (MTK_PIN_NO(121) | 6)
+
+#define MT8135_PIN_122_DPICK__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define MT8135_PIN_122_DPICK__FUNC_DPI0_CK (MTK_PIN_NO(122) | 1)
+#define MT8135_PIN_122_DPICK__FUNC_EINT101 (MTK_PIN_NO(122) | 2)
+#define MT8135_PIN_122_DPICK__FUNC_I2SIN_DAT (MTK_PIN_NO(122) | 3)
+#define MT8135_PIN_122_DPICK__FUNC_PCM1_DI (MTK_PIN_NO(122) | 5)
+#define MT8135_PIN_122_DPICK__FUNC_IRDA_PDN (MTK_PIN_NO(122) | 6)
+
+#define MT8135_PIN_123_DPIG4__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define MT8135_PIN_123_DPIG4__FUNC_DPI0_G4 (MTK_PIN_NO(123) | 1)
+#define MT8135_PIN_123_DPIG4__FUNC_EINT114 (MTK_PIN_NO(123) | 2)
+#define MT8135_PIN_123_DPIG4__FUNC_CM2DAT_2X_0 (MTK_PIN_NO(123) | 4)
+#define MT8135_PIN_123_DPIG4__FUNC_DSP2_ID (MTK_PIN_NO(123) | 5)
+
+#define MT8135_PIN_124_DPIG5__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define MT8135_PIN_124_DPIG5__FUNC_DPI0_G5 (MTK_PIN_NO(124) | 1)
+#define MT8135_PIN_124_DPIG5__FUNC_EINT115 (MTK_PIN_NO(124) | 2)
+#define MT8135_PIN_124_DPIG5__FUNC_CM2DAT_2X_1 (MTK_PIN_NO(124) | 4)
+#define MT8135_PIN_124_DPIG5__FUNC_DSP2_ICK (MTK_PIN_NO(124) | 5)
+
+#define MT8135_PIN_125_DPIR3__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define MT8135_PIN_125_DPIR3__FUNC_DPI0_R3 (MTK_PIN_NO(125) | 1)
+#define MT8135_PIN_125_DPIR3__FUNC_EINT121 (MTK_PIN_NO(125) | 2)
+#define MT8135_PIN_125_DPIR3__FUNC_CM2DAT_2X_7 (MTK_PIN_NO(125) | 4)
+
+#define MT8135_PIN_126_DPIG1__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define MT8135_PIN_126_DPIG1__FUNC_DPI0_G1 (MTK_PIN_NO(126) | 1)
+#define MT8135_PIN_126_DPIG1__FUNC_EINT111 (MTK_PIN_NO(126) | 2)
+#define MT8135_PIN_126_DPIG1__FUNC_DSP1_ICK (MTK_PIN_NO(126) | 5)
+
+#define MT8135_PIN_127_DPIVSYNC__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DPI0_VSYNC (MTK_PIN_NO(127) | 1)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_EINT98 (MTK_PIN_NO(127) | 2)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_I2SIN_CK (MTK_PIN_NO(127) | 3)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_DAC_CK (MTK_PIN_NO(127) | 4)
+#define MT8135_PIN_127_DPIVSYNC__FUNC_PCM1_CK (MTK_PIN_NO(127) | 5)
+
+#define MT8135_PIN_128_DPIHSYNC__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DPI0_HSYNC (MTK_PIN_NO(128) | 1)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_EINT99 (MTK_PIN_NO(128) | 2)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_I2SIN_WS (MTK_PIN_NO(128) | 3)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_DAC_WS (MTK_PIN_NO(128) | 4)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_PCM1_WS (MTK_PIN_NO(128) | 5)
+#define MT8135_PIN_128_DPIHSYNC__FUNC_IRDA_RXD (MTK_PIN_NO(128) | 6)
+
+#define MT8135_PIN_129_DPIB0__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define MT8135_PIN_129_DPIB0__FUNC_DPI0_B0 (MTK_PIN_NO(129) | 1)
+#define MT8135_PIN_129_DPIB0__FUNC_EINT102 (MTK_PIN_NO(129) | 2)
+#define MT8135_PIN_129_DPIB0__FUNC_SCL0 (MTK_PIN_NO(129) | 4)
+#define MT8135_PIN_129_DPIB0__FUNC_DISP_PWM (MTK_PIN_NO(129) | 5)
+
+#define MT8135_PIN_130_DPIB1__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define MT8135_PIN_130_DPIB1__FUNC_DPI0_B1 (MTK_PIN_NO(130) | 1)
+#define MT8135_PIN_130_DPIB1__FUNC_EINT103 (MTK_PIN_NO(130) | 2)
+#define MT8135_PIN_130_DPIB1__FUNC_CLKM0 (MTK_PIN_NO(130) | 3)
+#define MT8135_PIN_130_DPIB1__FUNC_SDA0 (MTK_PIN_NO(130) | 4)
+#define MT8135_PIN_130_DPIB1__FUNC_PWM1 (MTK_PIN_NO(130) | 5)
+
+#define MT8135_PIN_131_DPIB2__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define MT8135_PIN_131_DPIB2__FUNC_DPI0_B2 (MTK_PIN_NO(131) | 1)
+#define MT8135_PIN_131_DPIB2__FUNC_EINT104 (MTK_PIN_NO(131) | 2)
+#define MT8135_PIN_131_DPIB2__FUNC_CLKM1 (MTK_PIN_NO(131) | 3)
+#define MT8135_PIN_131_DPIB2__FUNC_SCL1 (MTK_PIN_NO(131) | 4)
+#define MT8135_PIN_131_DPIB2__FUNC_PWM2 (MTK_PIN_NO(131) | 5)
+
+#define MT8135_PIN_132_DPIB3__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define MT8135_PIN_132_DPIB3__FUNC_DPI0_B3 (MTK_PIN_NO(132) | 1)
+#define MT8135_PIN_132_DPIB3__FUNC_EINT105 (MTK_PIN_NO(132) | 2)
+#define MT8135_PIN_132_DPIB3__FUNC_CLKM2 (MTK_PIN_NO(132) | 3)
+#define MT8135_PIN_132_DPIB3__FUNC_SDA1 (MTK_PIN_NO(132) | 4)
+#define MT8135_PIN_132_DPIB3__FUNC_PWM3 (MTK_PIN_NO(132) | 5)
+
+#define MT8135_PIN_133_DPIB4__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define MT8135_PIN_133_DPIB4__FUNC_DPI0_B4 (MTK_PIN_NO(133) | 1)
+#define MT8135_PIN_133_DPIB4__FUNC_EINT106 (MTK_PIN_NO(133) | 2)
+#define MT8135_PIN_133_DPIB4__FUNC_CLKM3 (MTK_PIN_NO(133) | 3)
+#define MT8135_PIN_133_DPIB4__FUNC_SCL2 (MTK_PIN_NO(133) | 4)
+#define MT8135_PIN_133_DPIB4__FUNC_PWM4 (MTK_PIN_NO(133) | 5)
+
+#define MT8135_PIN_134_DPIB5__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define MT8135_PIN_134_DPIB5__FUNC_DPI0_B5 (MTK_PIN_NO(134) | 1)
+#define MT8135_PIN_134_DPIB5__FUNC_EINT107 (MTK_PIN_NO(134) | 2)
+#define MT8135_PIN_134_DPIB5__FUNC_CLKM4 (MTK_PIN_NO(134) | 3)
+#define MT8135_PIN_134_DPIB5__FUNC_SDA2 (MTK_PIN_NO(134) | 4)
+#define MT8135_PIN_134_DPIB5__FUNC_PWM5 (MTK_PIN_NO(134) | 5)
+
+#define MT8135_PIN_135_DPIB6__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define MT8135_PIN_135_DPIB6__FUNC_DPI0_B6 (MTK_PIN_NO(135) | 1)
+#define MT8135_PIN_135_DPIB6__FUNC_EINT108 (MTK_PIN_NO(135) | 2)
+#define MT8135_PIN_135_DPIB6__FUNC_CLKM5 (MTK_PIN_NO(135) | 3)
+#define MT8135_PIN_135_DPIB6__FUNC_SCL3 (MTK_PIN_NO(135) | 4)
+#define MT8135_PIN_135_DPIB6__FUNC_PWM6 (MTK_PIN_NO(135) | 5)
+
+#define MT8135_PIN_136_DPIB7__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define MT8135_PIN_136_DPIB7__FUNC_DPI0_B7 (MTK_PIN_NO(136) | 1)
+#define MT8135_PIN_136_DPIB7__FUNC_EINT109 (MTK_PIN_NO(136) | 2)
+#define MT8135_PIN_136_DPIB7__FUNC_CLKM6 (MTK_PIN_NO(136) | 3)
+#define MT8135_PIN_136_DPIB7__FUNC_SDA3 (MTK_PIN_NO(136) | 4)
+#define MT8135_PIN_136_DPIB7__FUNC_PWM7 (MTK_PIN_NO(136) | 5)
+
+#define MT8135_PIN_137_DPIG0__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define MT8135_PIN_137_DPIG0__FUNC_DPI0_G0 (MTK_PIN_NO(137) | 1)
+#define MT8135_PIN_137_DPIG0__FUNC_EINT110 (MTK_PIN_NO(137) | 2)
+#define MT8135_PIN_137_DPIG0__FUNC_DSP1_ID (MTK_PIN_NO(137) | 5)
+
+#define MT8135_PIN_138_DPIG2__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define MT8135_PIN_138_DPIG2__FUNC_DPI0_G2 (MTK_PIN_NO(138) | 1)
+#define MT8135_PIN_138_DPIG2__FUNC_EINT112 (MTK_PIN_NO(138) | 2)
+#define MT8135_PIN_138_DPIG2__FUNC_DSP1_IMS (MTK_PIN_NO(138) | 5)
+
+#define MT8135_PIN_139_DPIG3__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define MT8135_PIN_139_DPIG3__FUNC_DPI0_G3 (MTK_PIN_NO(139) | 1)
+#define MT8135_PIN_139_DPIG3__FUNC_EINT113 (MTK_PIN_NO(139) | 2)
+#define MT8135_PIN_139_DPIG3__FUNC_DSP2_IMS (MTK_PIN_NO(139) | 5)
+
+#define MT8135_PIN_140_DPIG6__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define MT8135_PIN_140_DPIG6__FUNC_DPI0_G6 (MTK_PIN_NO(140) | 1)
+#define MT8135_PIN_140_DPIG6__FUNC_EINT116 (MTK_PIN_NO(140) | 2)
+#define MT8135_PIN_140_DPIG6__FUNC_CM2DAT_2X_2 (MTK_PIN_NO(140) | 4)
+
+#define MT8135_PIN_141_DPIG7__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define MT8135_PIN_141_DPIG7__FUNC_DPI0_G7 (MTK_PIN_NO(141) | 1)
+#define MT8135_PIN_141_DPIG7__FUNC_EINT117 (MTK_PIN_NO(141) | 2)
+#define MT8135_PIN_141_DPIG7__FUNC_CM2DAT_2X_3 (MTK_PIN_NO(141) | 4)
+
+#define MT8135_PIN_142_DPIR0__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define MT8135_PIN_142_DPIR0__FUNC_DPI0_R0 (MTK_PIN_NO(142) | 1)
+#define MT8135_PIN_142_DPIR0__FUNC_EINT118 (MTK_PIN_NO(142) | 2)
+#define MT8135_PIN_142_DPIR0__FUNC_CM2DAT_2X_4 (MTK_PIN_NO(142) | 4)
+
+#define MT8135_PIN_143_DPIR1__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define MT8135_PIN_143_DPIR1__FUNC_DPI0_R1 (MTK_PIN_NO(143) | 1)
+#define MT8135_PIN_143_DPIR1__FUNC_EINT119 (MTK_PIN_NO(143) | 2)
+#define MT8135_PIN_143_DPIR1__FUNC_CM2DAT_2X_5 (MTK_PIN_NO(143) | 4)
+
+#define MT8135_PIN_144_DPIR2__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define MT8135_PIN_144_DPIR2__FUNC_DPI0_R2 (MTK_PIN_NO(144) | 1)
+#define MT8135_PIN_144_DPIR2__FUNC_EINT120 (MTK_PIN_NO(144) | 2)
+#define MT8135_PIN_144_DPIR2__FUNC_CM2DAT_2X_6 (MTK_PIN_NO(144) | 4)
+
+#define MT8135_PIN_145_DPIR4__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define MT8135_PIN_145_DPIR4__FUNC_DPI0_R4 (MTK_PIN_NO(145) | 1)
+#define MT8135_PIN_145_DPIR4__FUNC_EINT122 (MTK_PIN_NO(145) | 2)
+#define MT8135_PIN_145_DPIR4__FUNC_CM2DAT_2X_8 (MTK_PIN_NO(145) | 4)
+
+#define MT8135_PIN_146_DPIR5__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define MT8135_PIN_146_DPIR5__FUNC_DPI0_R5 (MTK_PIN_NO(146) | 1)
+#define MT8135_PIN_146_DPIR5__FUNC_EINT123 (MTK_PIN_NO(146) | 2)
+#define MT8135_PIN_146_DPIR5__FUNC_CM2DAT_2X_9 (MTK_PIN_NO(146) | 4)
+
+#define MT8135_PIN_147_DPIR6__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define MT8135_PIN_147_DPIR6__FUNC_DPI0_R6 (MTK_PIN_NO(147) | 1)
+#define MT8135_PIN_147_DPIR6__FUNC_EINT124 (MTK_PIN_NO(147) | 2)
+#define MT8135_PIN_147_DPIR6__FUNC_CM2VSYNC_2X (MTK_PIN_NO(147) | 4)
+
+#define MT8135_PIN_148_DPIR7__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define MT8135_PIN_148_DPIR7__FUNC_DPI0_R7 (MTK_PIN_NO(148) | 1)
+#define MT8135_PIN_148_DPIR7__FUNC_EINT125 (MTK_PIN_NO(148) | 2)
+#define MT8135_PIN_148_DPIR7__FUNC_CM2HSYNC_2X (MTK_PIN_NO(148) | 4)
+
+#define MT8135_PIN_149_TDN3__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define MT8135_PIN_149_TDN3__FUNC_EINT36 (MTK_PIN_NO(149) | 2)
+
+#define MT8135_PIN_150_TDP3__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define MT8135_PIN_150_TDP3__FUNC_EINT35 (MTK_PIN_NO(150) | 2)
+
+#define MT8135_PIN_151_TDN2__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define MT8135_PIN_151_TDN2__FUNC_EINT169 (MTK_PIN_NO(151) | 2)
+
+#define MT8135_PIN_152_TDP2__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define MT8135_PIN_152_TDP2__FUNC_EINT168 (MTK_PIN_NO(152) | 2)
+
+#define MT8135_PIN_153_TCN__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define MT8135_PIN_153_TCN__FUNC_EINT163 (MTK_PIN_NO(153) | 2)
+
+#define MT8135_PIN_154_TCP__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define MT8135_PIN_154_TCP__FUNC_EINT162 (MTK_PIN_NO(154) | 2)
+
+#define MT8135_PIN_155_TDN1__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define MT8135_PIN_155_TDN1__FUNC_EINT167 (MTK_PIN_NO(155) | 2)
+
+#define MT8135_PIN_156_TDP1__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define MT8135_PIN_156_TDP1__FUNC_EINT166 (MTK_PIN_NO(156) | 2)
+
+#define MT8135_PIN_157_TDN0__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define MT8135_PIN_157_TDN0__FUNC_EINT165 (MTK_PIN_NO(157) | 2)
+
+#define MT8135_PIN_158_TDP0__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define MT8135_PIN_158_TDP0__FUNC_EINT164 (MTK_PIN_NO(158) | 2)
+
+#define MT8135_PIN_159_RDN3__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define MT8135_PIN_159_RDN3__FUNC_EINT18 (MTK_PIN_NO(159) | 2)
+
+#define MT8135_PIN_160_RDP3__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define MT8135_PIN_160_RDP3__FUNC_EINT30 (MTK_PIN_NO(160) | 2)
+
+#define MT8135_PIN_161_RDN2__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define MT8135_PIN_161_RDN2__FUNC_EINT31 (MTK_PIN_NO(161) | 2)
+
+#define MT8135_PIN_162_RDP2__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define MT8135_PIN_162_RDP2__FUNC_EINT32 (MTK_PIN_NO(162) | 2)
+
+#define MT8135_PIN_163_RCN__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define MT8135_PIN_163_RCN__FUNC_EINT33 (MTK_PIN_NO(163) | 2)
+
+#define MT8135_PIN_164_RCP__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define MT8135_PIN_164_RCP__FUNC_EINT39 (MTK_PIN_NO(164) | 2)
+
+#define MT8135_PIN_165_RDN1__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+
+#define MT8135_PIN_166_RDP1__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+
+#define MT8135_PIN_167_RDN0__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+
+#define MT8135_PIN_168_RDP0__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+
+#define MT8135_PIN_169_RDN1_A__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define MT8135_PIN_169_RDN1_A__FUNC_CMDAT6 (MTK_PIN_NO(169) | 1)
+#define MT8135_PIN_169_RDN1_A__FUNC_EINT175 (MTK_PIN_NO(169) | 2)
+
+#define MT8135_PIN_170_RDP1_A__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define MT8135_PIN_170_RDP1_A__FUNC_CMDAT7 (MTK_PIN_NO(170) | 1)
+#define MT8135_PIN_170_RDP1_A__FUNC_EINT174 (MTK_PIN_NO(170) | 2)
+
+#define MT8135_PIN_171_RCN_A__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define MT8135_PIN_171_RCN_A__FUNC_CMDAT8 (MTK_PIN_NO(171) | 1)
+#define MT8135_PIN_171_RCN_A__FUNC_EINT171 (MTK_PIN_NO(171) | 2)
+
+#define MT8135_PIN_172_RCP_A__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define MT8135_PIN_172_RCP_A__FUNC_CMDAT9 (MTK_PIN_NO(172) | 1)
+#define MT8135_PIN_172_RCP_A__FUNC_EINT170 (MTK_PIN_NO(172) | 2)
+
+#define MT8135_PIN_173_RDN0_A__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define MT8135_PIN_173_RDN0_A__FUNC_CMHSYNC (MTK_PIN_NO(173) | 1)
+#define MT8135_PIN_173_RDN0_A__FUNC_EINT173 (MTK_PIN_NO(173) | 2)
+
+#define MT8135_PIN_174_RDP0_A__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define MT8135_PIN_174_RDP0_A__FUNC_CMVSYNC (MTK_PIN_NO(174) | 1)
+#define MT8135_PIN_174_RDP0_A__FUNC_EINT172 (MTK_PIN_NO(174) | 2)
+
+#define MT8135_PIN_175_RDN1_B__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMDAT2 (MTK_PIN_NO(175) | 1)
+#define MT8135_PIN_175_RDN1_B__FUNC_EINT181 (MTK_PIN_NO(175) | 2)
+#define MT8135_PIN_175_RDN1_B__FUNC_CMCSD2 (MTK_PIN_NO(175) | 3)
+
+#define MT8135_PIN_176_RDP1_B__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMDAT3 (MTK_PIN_NO(176) | 1)
+#define MT8135_PIN_176_RDP1_B__FUNC_EINT180 (MTK_PIN_NO(176) | 2)
+#define MT8135_PIN_176_RDP1_B__FUNC_CMCSD3 (MTK_PIN_NO(176) | 3)
+
+#define MT8135_PIN_177_RCN_B__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define MT8135_PIN_177_RCN_B__FUNC_CMDAT4 (MTK_PIN_NO(177) | 1)
+#define MT8135_PIN_177_RCN_B__FUNC_EINT177 (MTK_PIN_NO(177) | 2)
+
+#define MT8135_PIN_178_RCP_B__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define MT8135_PIN_178_RCP_B__FUNC_CMDAT5 (MTK_PIN_NO(178) | 1)
+#define MT8135_PIN_178_RCP_B__FUNC_EINT176 (MTK_PIN_NO(178) | 2)
+
+#define MT8135_PIN_179_RDN0_B__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMDAT0 (MTK_PIN_NO(179) | 1)
+#define MT8135_PIN_179_RDN0_B__FUNC_EINT179 (MTK_PIN_NO(179) | 2)
+#define MT8135_PIN_179_RDN0_B__FUNC_CMCSD0 (MTK_PIN_NO(179) | 3)
+
+#define MT8135_PIN_180_RDP0_B__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMDAT1 (MTK_PIN_NO(180) | 1)
+#define MT8135_PIN_180_RDP0_B__FUNC_EINT178 (MTK_PIN_NO(180) | 2)
+#define MT8135_PIN_180_RDP0_B__FUNC_CMCSD1 (MTK_PIN_NO(180) | 3)
+
+#define MT8135_PIN_181_CMPCLK__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMPCLK (MTK_PIN_NO(181) | 1)
+#define MT8135_PIN_181_CMPCLK__FUNC_EINT182 (MTK_PIN_NO(181) | 2)
+#define MT8135_PIN_181_CMPCLK__FUNC_CMCSK (MTK_PIN_NO(181) | 3)
+#define MT8135_PIN_181_CMPCLK__FUNC_CM2MCLK_4X (MTK_PIN_NO(181) | 4)
+#define MT8135_PIN_181_CMPCLK__FUNC_TS_AUXADC_SEL_3 (MTK_PIN_NO(181) | 5)
+#define MT8135_PIN_181_CMPCLK__FUNC_VENC_TEST_CK (MTK_PIN_NO(181) | 6)
+#define MT8135_PIN_181_CMPCLK__FUNC_TESTA_OUT27 (MTK_PIN_NO(181) | 7)
+
+#define MT8135_PIN_182_CMMCLK__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define MT8135_PIN_182_CMMCLK__FUNC_CMMCLK (MTK_PIN_NO(182) | 1)
+#define MT8135_PIN_182_CMMCLK__FUNC_EINT183 (MTK_PIN_NO(182) | 2)
+#define MT8135_PIN_182_CMMCLK__FUNC_TS_AUXADC_SEL_2 (MTK_PIN_NO(182) | 5)
+#define MT8135_PIN_182_CMMCLK__FUNC_TESTA_OUT28 (MTK_PIN_NO(182) | 7)
+
+#define MT8135_PIN_183_CMRST__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define MT8135_PIN_183_CMRST__FUNC_CMRST (MTK_PIN_NO(183) | 1)
+#define MT8135_PIN_183_CMRST__FUNC_EINT185 (MTK_PIN_NO(183) | 2)
+#define MT8135_PIN_183_CMRST__FUNC_TS_AUXADC_SEL_1 (MTK_PIN_NO(183) | 5)
+#define MT8135_PIN_183_CMRST__FUNC_TESTA_OUT30 (MTK_PIN_NO(183) | 7)
+
+#define MT8135_PIN_184_CMPDN__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define MT8135_PIN_184_CMPDN__FUNC_CMPDN (MTK_PIN_NO(184) | 1)
+#define MT8135_PIN_184_CMPDN__FUNC_EINT184 (MTK_PIN_NO(184) | 2)
+#define MT8135_PIN_184_CMPDN__FUNC_TS_AUXADC_SEL_0 (MTK_PIN_NO(184) | 5)
+#define MT8135_PIN_184_CMPDN__FUNC_TESTA_OUT29 (MTK_PIN_NO(184) | 7)
+
+#define MT8135_PIN_185_CMFLASH__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define MT8135_PIN_185_CMFLASH__FUNC_CMFLASH (MTK_PIN_NO(185) | 1)
+#define MT8135_PIN_185_CMFLASH__FUNC_EINT186 (MTK_PIN_NO(185) | 2)
+#define MT8135_PIN_185_CMFLASH__FUNC_CM2MCLK_3X (MTK_PIN_NO(185) | 3)
+#define MT8135_PIN_185_CMFLASH__FUNC_MFG_TEST_CK_1 (MTK_PIN_NO(185) | 6)
+#define MT8135_PIN_185_CMFLASH__FUNC_TESTA_OUT31 (MTK_PIN_NO(185) | 7)
+
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_MRG_I2S_P_CLK (MTK_PIN_NO(186) | 1)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_EINT14 (MTK_PIN_NO(186) | 2)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_I2SIN_CK (MTK_PIN_NO(186) | 3)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_PCM0_CK (MTK_PIN_NO(186) | 4)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_DSP2_ICK (MTK_PIN_NO(186) | 5)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_IMG_TEST_CK (MTK_PIN_NO(186) | 6)
+#define MT8135_PIN_186_MRG_I2S_PCM_CLK__FUNC_USB_SCL (MTK_PIN_NO(186) | 7)
+
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_MRG_I2S_SYNC (MTK_PIN_NO(187) | 1)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_EINT16 (MTK_PIN_NO(187) | 2)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_I2SIN_WS (MTK_PIN_NO(187) | 3)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_PCM0_WS (MTK_PIN_NO(187) | 4)
+#define MT8135_PIN_187_MRG_I2S_PCM_SYNC__FUNC_DISP_TEST_CK (MTK_PIN_NO(187) | 6)
+
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MRG_I2S_PCM_RX (MTK_PIN_NO(188) | 1)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_EINT15 (MTK_PIN_NO(188) | 2)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_I2SIN_DAT (MTK_PIN_NO(188) | 3)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_PCM0_DI (MTK_PIN_NO(188) | 4)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_DSP2_ID (MTK_PIN_NO(188) | 5)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_MFG_TEST_CK (MTK_PIN_NO(188) | 6)
+#define MT8135_PIN_188_MRG_I2S_PCM_RX__FUNC_USB_SDA (MTK_PIN_NO(188) | 7)
+
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_MRG_I2S_PCM_TX (MTK_PIN_NO(189) | 1)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_EINT17 (MTK_PIN_NO(189) | 2)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_I2SOUT_DAT (MTK_PIN_NO(189) | 3)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_PCM0_DO (MTK_PIN_NO(189) | 4)
+#define MT8135_PIN_189_MRG_I2S_PCM_TX__FUNC_VDEC_TEST_CK (MTK_PIN_NO(189) | 6)
+
+#define MT8135_PIN_190_SRCLKENAI__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define MT8135_PIN_190_SRCLKENAI__FUNC_SRCLKENAI (MTK_PIN_NO(190) | 1)
+
+#define MT8135_PIN_191_URXD3__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define MT8135_PIN_191_URXD3__FUNC_URXD3 (MTK_PIN_NO(191) | 1)
+#define MT8135_PIN_191_URXD3__FUNC_EINT87 (MTK_PIN_NO(191) | 2)
+#define MT8135_PIN_191_URXD3__FUNC_UTXD3 (MTK_PIN_NO(191) | 3)
+#define MT8135_PIN_191_URXD3__FUNC_TS_AUX_ST (MTK_PIN_NO(191) | 5)
+#define MT8135_PIN_191_URXD3__FUNC_PWM4 (MTK_PIN_NO(191) | 6)
+
+#define MT8135_PIN_192_UTXD3__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define MT8135_PIN_192_UTXD3__FUNC_UTXD3 (MTK_PIN_NO(192) | 1)
+#define MT8135_PIN_192_UTXD3__FUNC_EINT86 (MTK_PIN_NO(192) | 2)
+#define MT8135_PIN_192_UTXD3__FUNC_URXD3 (MTK_PIN_NO(192) | 3)
+#define MT8135_PIN_192_UTXD3__FUNC_TS_AUX_CS_B (MTK_PIN_NO(192) | 5)
+#define MT8135_PIN_192_UTXD3__FUNC_PWM3 (MTK_PIN_NO(192) | 6)
+
+#define MT8135_PIN_193_SDA2__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define MT8135_PIN_193_SDA2__FUNC_SDA2 (MTK_PIN_NO(193) | 1)
+#define MT8135_PIN_193_SDA2__FUNC_EINT95 (MTK_PIN_NO(193) | 2)
+#define MT8135_PIN_193_SDA2__FUNC_CLKM5 (MTK_PIN_NO(193) | 3)
+#define MT8135_PIN_193_SDA2__FUNC_PWM5 (MTK_PIN_NO(193) | 4)
+#define MT8135_PIN_193_SDA2__FUNC_TS_AUX_PWDB (MTK_PIN_NO(193) | 5)
+
+#define MT8135_PIN_194_SCL2__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define MT8135_PIN_194_SCL2__FUNC_SCL2 (MTK_PIN_NO(194) | 1)
+#define MT8135_PIN_194_SCL2__FUNC_EINT94 (MTK_PIN_NO(194) | 2)
+#define MT8135_PIN_194_SCL2__FUNC_CLKM4 (MTK_PIN_NO(194) | 3)
+#define MT8135_PIN_194_SCL2__FUNC_PWM4 (MTK_PIN_NO(194) | 4)
+#define MT8135_PIN_194_SCL2__FUNC_TS_AUXADC_TEST_CK (MTK_PIN_NO(194) | 5)
+
+#define MT8135_PIN_195_SDA1__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define MT8135_PIN_195_SDA1__FUNC_SDA1 (MTK_PIN_NO(195) | 1)
+#define MT8135_PIN_195_SDA1__FUNC_EINT93 (MTK_PIN_NO(195) | 2)
+#define MT8135_PIN_195_SDA1__FUNC_CLKM3 (MTK_PIN_NO(195) | 3)
+#define MT8135_PIN_195_SDA1__FUNC_PWM3 (MTK_PIN_NO(195) | 4)
+#define MT8135_PIN_195_SDA1__FUNC_TS_AUX_SCLK_PWDB (MTK_PIN_NO(195) | 5)
+
+#define MT8135_PIN_196_SCL1__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define MT8135_PIN_196_SCL1__FUNC_SCL1 (MTK_PIN_NO(196) | 1)
+#define MT8135_PIN_196_SCL1__FUNC_EINT92 (MTK_PIN_NO(196) | 2)
+#define MT8135_PIN_196_SCL1__FUNC_CLKM2 (MTK_PIN_NO(196) | 3)
+#define MT8135_PIN_196_SCL1__FUNC_PWM2 (MTK_PIN_NO(196) | 4)
+#define MT8135_PIN_196_SCL1__FUNC_TS_AUX_DIN (MTK_PIN_NO(196) | 5)
+
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_GPIO197 (MTK_PIN_NO(197) | 0)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MSDC3_DAT2 (MTK_PIN_NO(197) | 1)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_EINT71 (MTK_PIN_NO(197) | 2)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_SCL6 (MTK_PIN_NO(197) | 3)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_PWM5 (MTK_PIN_NO(197) | 4)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_CLKM4 (MTK_PIN_NO(197) | 5)
+#define MT8135_PIN_197_MSDC3_DAT2__FUNC_MFG_TEST_CK_2 (MTK_PIN_NO(197) | 6)
+
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_GPIO198 (MTK_PIN_NO(198) | 0)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MSDC3_DAT3 (MTK_PIN_NO(198) | 1)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_EINT72 (MTK_PIN_NO(198) | 2)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_SDA6 (MTK_PIN_NO(198) | 3)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_PWM6 (MTK_PIN_NO(198) | 4)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_CLKM5 (MTK_PIN_NO(198) | 5)
+#define MT8135_PIN_198_MSDC3_DAT3__FUNC_MFG_TEST_CK_3 (MTK_PIN_NO(198) | 6)
+
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_GPIO199 (MTK_PIN_NO(199) | 0)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MSDC3_CMD (MTK_PIN_NO(199) | 1)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_EINT68 (MTK_PIN_NO(199) | 2)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_SDA2 (MTK_PIN_NO(199) | 3)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_PWM2 (MTK_PIN_NO(199) | 4)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_CLKM1 (MTK_PIN_NO(199) | 5)
+#define MT8135_PIN_199_MSDC3_CMD__FUNC_MFG_TEST_CK_4 (MTK_PIN_NO(199) | 6)
+
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_GPIO200 (MTK_PIN_NO(200) | 0)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_MSDC3_CLK (MTK_PIN_NO(200) | 1)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_EINT67 (MTK_PIN_NO(200) | 2)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_SCL2 (MTK_PIN_NO(200) | 3)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_PWM1 (MTK_PIN_NO(200) | 4)
+#define MT8135_PIN_200_MSDC3_CLK__FUNC_CLKM0 (MTK_PIN_NO(200) | 5)
+
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_GPIO201 (MTK_PIN_NO(201) | 0)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_MSDC3_DAT1 (MTK_PIN_NO(201) | 1)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_EINT70 (MTK_PIN_NO(201) | 2)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_SDA3 (MTK_PIN_NO(201) | 3)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_PWM4 (MTK_PIN_NO(201) | 4)
+#define MT8135_PIN_201_MSDC3_DAT1__FUNC_CLKM3 (MTK_PIN_NO(201) | 5)
+
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_GPIO202 (MTK_PIN_NO(202) | 0)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_MSDC3_DAT0 (MTK_PIN_NO(202) | 1)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_EINT69 (MTK_PIN_NO(202) | 2)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_SCL3 (MTK_PIN_NO(202) | 3)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_PWM3 (MTK_PIN_NO(202) | 4)
+#define MT8135_PIN_202_MSDC3_DAT0__FUNC_CLKM2 (MTK_PIN_NO(202) | 5)
+
+#endif /* __DTS_MT8135_PINFUNC_H */
diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi
index a161e99ffcc4..0aba9eb28e2b 100644
--- a/arch/arm/boot/dts/mt8135.dtsi
+++ b/arch/arm/boot/dts/mt8135.dtsi
@@ -15,6 +15,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include "skeleton64.dtsi"
+#include "mt8135-pinfunc.h"
 
 / {
 	compatible = "mediatek,mt8135";
@@ -101,6 +102,29 @@
 		compatible = "simple-bus";
 		ranges;
 
+		/*
+		 * Pinctrl access register at 0x10005000 and 0x1020c000 through
+		 * regmap. Register 0x1000b000 is used by EINT.
+		 */
+		pio: pinctrl@10005000 {
+			compatible = "mediatek,mt8135-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>;
+			pins-are-numbered;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		syscfg_pctl_a: syscfg_pctl_a@10005000 {
+			compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
 		timer: timer@10008000 {
 			compatible = "mediatek,mt8135-timer",
 					"mediatek,mt6577-timer";
@@ -119,6 +143,11 @@
 			reg = <0 0x10200030 0 0x1c>;
 		};
 
+		syscfg_pctl_b: syscfg_pctl_b@1020c000 {
+			compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon";
+			reg = <0 0x1020c000 0 0x1000>;
+		};
+
 		gic: interrupt-controller@10211000 {
 			compatible = "arm,cortex-a15-gic";
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/omap3-devkit8000.dts b/arch/arm/boot/dts/omap3-devkit8000.dts
index 921de6605f07..be2297116a14 100644
--- a/arch/arm/boot/dts/omap3-devkit8000.dts
+++ b/arch/arm/boot/dts/omap3-devkit8000.dts
@@ -157,3 +157,44 @@
 		};
 	};
 };
+
+&gpmc {
+	ranges = <6 0 0x2c000000 0x1000000>;       /* CS6: 16MB for DM9000 */
+
+	ethernet@0,0 {
+		compatible = "davicom,dm9000";
+		reg =  <6 0x000 2
+			6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		bank-width = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
+		davicom,no-eeprom;
+
+		gpmc,mux-add-data = <0>;
+		gpmc,device-width = <1>;
+		gpmc,wait-pin = <0>;
+		gpmc,cycle2cycle-samecsen = <1>;
+		gpmc,cycle2cycle-diffcsen = <1>;
+
+		gpmc,cs-on-ns = <6>;
+		gpmc,cs-rd-off-ns = <180>;
+		gpmc,cs-wr-off-ns = <180>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <18>;
+		gpmc,adv-wr-off-ns = <48>;
+		gpmc,oe-on-ns = <54>;
+		gpmc,oe-off-ns = <168>;
+		gpmc,we-on-ns = <54>;
+		gpmc,we-off-ns = <168>;
+		gpmc,rd-cycle-ns = <186>;
+		gpmc,wr-cycle-ns = <186>;
+		gpmc,access-ns = <144>;
+		gpmc,page-burst-access-ns = <24>;
+		gpmc,bus-turnaround-ns = <90>;
+		gpmc,cycle2cycle-delay-ns = <90>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi
index 346552b94d9f..b2589f96d5f7 100644
--- a/arch/arm/boot/dts/omap3-evm-common.dtsi
+++ b/arch/arm/boot/dts/omap3-evm-common.dtsi
@@ -96,6 +96,7 @@
 };
 
 &mmc1 {
+	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	vmmc-supply = <&vmmc1>;
 	vmmc_aux-supply = <&vsim>;
 	bus-width = <8>;
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index b9f68817bd6e..7166d8876ea8 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -48,6 +48,28 @@
 		ti,mcbsp = <&mcbsp2>;
 	};
 
+	 /* GSM audio */
+	sound_telephony {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "GTA04 voice";
+		simple-audio-card,bitclock-master = <&telephony_link_master>;
+		simple-audio-card,frame-master = <&telephony_link_master>;
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp4>;
+		};
+
+		telephony_link_master: simple-audio-card,codec {
+			sound-dai = <&gtm601_codec>;
+		};
+	};
+
+	gtm601_codec: gsm_codec {
+		compatible = "option,gtm601";
+		#sound-dai-cells = <0>;
+	};
+
 	spi_lcd {
 		compatible = "spi-gpio";
 		#address-cells = <0x1>;
@@ -200,6 +222,12 @@
 			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
 		>;
        };
+
+	hdq_pins: hdq_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
+		>;
+	};
 };
 
 &omap3_pmx_core2 {
@@ -517,3 +545,12 @@
 &mcbsp2 {
 	status = "okay";
 };
+
+&hdqw1w {
+        pinctrl-names = "default";
+        pinctrl-0 = <&hdq_pins>;
+};
+
+&mcbsp4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index b699bc48f242..bd6e6769c7ce 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -34,63 +34,63 @@
 		key_enter {
 			label = "enter";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* gpio101 */
-			linux,code = <0x0107001c>; /* KEY_ENTER */
+			linux,code = <KEY_ENTER>;
 			gpio-key,wakeup;
 		};
 
 		key_f1 {
 			label = "f1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* gpio102 */
-			linux,code = <0x0303003b>; /* KEY_F1 */
+			linux,code = <KEY_F1>;
 			gpio-key,wakeup;
 		};
 
 		key_f2 {
 			label = "f2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* gpio103 */
-			linux,code = <0x0403003c>; /* KEY_F2 */
+			linux,code = <KEY_F2>;
 			gpio-key,wakeup;
 		};
 
 		key_f3 {
 			label = "f3";
 			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* gpio104 */
-			linux,code = <0x0503003d>; /* KEY_F3 */
+			linux,code = <KEY_F3>;
 			gpio-key,wakeup;
 		};
 
 		key_f4 {
 			label = "f4";
 			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* gpio105 */
-			linux,code = <0x0704003e>; /* KEY_F4 */
+			linux,code = <KEY_F4>;
 			gpio-key,wakeup;
 		};
 
 		key_left {
 			label = "left";
 			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
-			linux,code = <0x04070069>; /* KEY_LEFT */
+			linux,code = <KEY_LEFT>;
 			gpio-key,wakeup;
 		};
 
 		key_right {
 			label = "right";
 			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* gpio107 */
-			linux,code = <0x0507006a>; /* KEY_RIGHT */
+			linux,code = <KEY_RIGHT>;
 			gpio-key,wakeup;
 		};
 
 		key_up {
 			label = "up";
 			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* gpio108 */
-			linux,code = <0x06070067>; /* KEY_UP */
+			linux,code = <KEY_UP>;
 			gpio-key,wakeup;
 		};
 
 		key_down {
 			label = "down";
 			gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* gpio109 */
-			linux,code = <0x0707006c>; /* KEY_DOWN */
+			linux,code = <KEY_DOWN>;
 			gpio-key,wakeup;
 		};
 	};
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 74777a6e200a..275618f19a43 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -597,18 +597,20 @@
 };
 
 &uart1 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
 };
 
 &uart3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart3_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			      <&omap5_pmx_core 0x19c>;
 };
 
 &uart5 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&uart5_pins>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
 };
 
 &cpu0 {
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 80fc5d7e9ef9..90b99714ad80 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -1,6 +1,6 @@
 /* The pxa3xx skeleton simply augments the 2xx version */
 #include "pxa2xx.dtsi"
-#include "dt-bindings/clock/pxa2xx-clock.h"
+#include "dt-bindings/clock/pxa-clock.h"
 
 / {
 	model = "Marvell PXA27x familiy SoC";
@@ -12,28 +12,61 @@
 			marvell,intc-nr-irqs = <34>;
 		};
 
+		gpio: gpio@40e00000 {
+			compatible = "intel,pxa27x-gpio";
+			clocks = <&clks CLK_NONE>;
+		};
+
 		pwm0: pwm@40b00000 {
 			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
 			reg = <0x40b00000 0x10>;
 			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
 		};
 
 		pwm1: pwm@40b00010 {
 			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
 			reg = <0x40b00010 0x10>;
 			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
 		};
 
 		pwm2: pwm@40c00000 {
 			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
 			reg = <0x40c00000 0x10>;
 			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM0>;
 		};
 
 		pwm3: pwm@40c00010 {
 			compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
 			reg = <0x40c00010 0x10>;
 			#pwm-cells = <1>;
+			clocks = <&clks CLK_PWM1>;
+		};
+
+		pwri2c: i2c@40f000180 {
+			compatible = "mrvl,pxa-i2c";
+			reg = <0x40f00180 0x24>;
+			interrupts = <6>;
+			clocks = <&clks CLK_PWRI2C>;
+			status = "disabled";
+		};
+
+		pxa27x_udc: udc@40600000 {
+			compatible = "marvell,pxa270-udc";
+			reg = <0x40600000 0x10000>;
+			interrupts = <11>;
+			clocks = <&clks CLK_USB>;
+			status = "disabled";
+		};
+
+		keypad: keypad@41500000 {
+			compatible = "marvell,pxa27x-keypad";
+			reg = <0x41500000 0x4c>;
+			interrupts = <4>;
+			clocks = <&clks CLK_KEYPAD>;
+			status = "disabled";
 		};
 	};
 
@@ -46,11 +79,18 @@
 		#size-cells = <1>;
 		ranges;
 
-		pxa2xx_clks: pxa2xx_clks@41300004 {
-			compatible = "marvell,pxa-clocks";
+		clks: pxa2xx_clks@41300004 {
+			compatible = "marvell,pxa270-clocks";
 			#clock-cells = <1>;
 			status = "okay";
 		};
 	};
 
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clks CLK_OSTIMER>;
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index c08f84629aa9..71a0cd7388d1 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -6,7 +6,8 @@
  * Licensed under GPLv2 or later.
  */
 
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
+#include "dt-bindings/clock/pxa-clock.h"
 
 / {
 	model = "Marvell PXA2xx family SoC";
@@ -79,6 +80,7 @@
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40100000 0x30>;
 			interrupts = <22>;
+			clocks = <&clks CLK_FFUART>;
 			status = "disabled";
 		};
 
@@ -86,6 +88,7 @@
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40200000 0x30>;
 			interrupts = <21>;
+			clocks = <&clks CLK_BTUART>;
 			status = "disabled";
 		};
 
@@ -93,6 +96,7 @@
 			compatible = "mrvl,pxa-uart";
 			reg = <0x40700000 0x30>;
 			interrupts = <20>;
+			clocks = <&clks CLK_STUART>;
 			status = "disabled";
 		};
 
@@ -107,6 +111,7 @@
 			compatible = "mrvl,pxa-i2c";
 			reg = <0x40301680 0x30>;
 			interrupts = <18>;
+			clocks = <&clks CLK_I2C>;
 			#address-cells = <0x1>;
 			#size-cells = <0>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 83bb0eff697b..7ad0b1771098 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -1,5 +1,5 @@
 /* The pxa3xx skeleton simply augments the 2xx version */
-/include/ "pxa2xx.dtsi"
+#include "pxa2xx.dtsi"
 
 / {
 	model = "Marvell PXA3xx familiy SoC";
@@ -10,6 +10,7 @@
 			compatible = "mrvl,pwri2c";
 			reg = <0x40f500c0 0x30>;
 			interrupts = <6>;
+			clocks = <&clks CLK_PWRI2C>;
 			#address-cells = <0x1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -19,6 +20,7 @@
 			compatible = "marvell,pxa3xx-nand";
 			reg = <0x43100000 90>;
 			interrupts = <45>;
+			clocks = <&clks CLK_NAND>;
 			#address-cells = <1>;
 			#size-cells = <1>;	
 			status = "disabled";
@@ -32,6 +34,7 @@
 		gpio: gpio@40e00000 {
 			compatible = "intel,pxa3xx-gpio";
 			reg = <0x40e00000 0x10000>;
+			clocks = <&clks CLK_GPIO>;
 			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupts = <8 9 10>;
 			gpio-controller;
@@ -40,4 +43,28 @@
 			#interrupt-cells = <0x2>;
 		};
 	};
+
+	clocks {
+	       /*
+		* The muxing of external clocks/internal dividers for osc* clock
+		* sources has been hidden under the carpet by now.
+		*/
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		clks: pxa3xx_clks@41300004 {
+			compatible = "marvell,pxa300-clocks";
+			#clock-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	timer@40a00000 {
+		compatible = "marvell,pxa-timer";
+		reg = <0x40a00000 0x20>;
+		interrupts = <26>;
+		clocks = <&clks CLK_OSTIMER>;
+		status = "okay";
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 5d75666f7f6c..71512b3ca444 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -14,6 +14,67 @@
 			};
 		};
 
+		rpm@108000 {
+			regulators {
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s1>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				pm8921_s4: s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3050000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+			};
+		};
+
 		gsbi@12440000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
@@ -40,6 +101,45 @@
 			};
 		};
 
+		/* OTG */
+		usb1_phy: phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		usb3_phy: phy@12520000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		usb4_phy: phy@12530000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		gadget1: gadget@12500000 {
+			status = "ok";
+		};
+
+		/* OTG */
+		usb1: usb@12500000 {
+			status = "ok";
+		};
+
+		usb3: usb@12520000 {
+			status = "okay";
+		};
+
+		usb4: usb@12530000 {
+			status = "okay";
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index e641001ca2a7..a7c939ba8873 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,15 +5,12 @@
 	model = "Qualcomm APQ8064/IFC6410";
 	compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
 
+	aliases {
+		serial0 = &gsbi7_serial;
+	};
+
 	soc {
 		pinctrl@800000 {
-			i2c1_pins: i2c1 {
-				mux {
-					pins = "gpio20", "gpio21";
-					function = "gsbi1";
-				};
-			};
-
 			card_detect: card_detect {
 				mux {
 					pins = "gpio26";
@@ -23,6 +20,83 @@
 			};
 		};
 
+		rpm@108000 {
+			regulators {
+				vin_lvs1_3_6-supply = <&pm8921_s4>;
+				vin_lvs2-supply = <&pm8921_s1>;
+				vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+				vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vdd_l24-supply = <&pm8921_s1>;
+				vdd_l25-supply = <&pm8921_s1>;
+				vdd_l26-supply = <&pm8921_s7>;
+				vdd_l27-supply = <&pm8921_s7>;
+				vdd_l28-supply = <&pm8921_s7>;
+
+
+				/* Buck SMPS */
+				pm8921_s1: s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				pm8921_s3: s3 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1400000>;
+					qcom,switch-mode-frequency = <4800000>;
+				};
+
+				pm8921_s4: s4 {
+					regulator-min-microvolt	= <1800000>;
+					regulator-max-microvolt	= <1800000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				pm8921_s7: s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				pm8921_l3: l3 {
+					regulator-min-microvolt = <3050000>;
+					regulator-max-microvolt = <3300000>;
+					bias-pull-down;
+				};
+
+				pm8921_l4: l4 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				pm8921_l6: l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				pm8921_l23: l23 {
+					regulator-min-microvolt = <1700000>;
+					regulator-max-microvolt = <1900000>;
+					bias-pull-down;
+				};
+			};
+		};
+
+		gsbi3: gsbi@16200000 {
+			status = "okay";
+			qcom,mode = <GSBI_PROT_I2C>;
+			i2c3: i2c@16280000 {
+				status = "okay";
+				pinctrl-0 = <&i2c3_pins>;
+				pinctrl-names = "default";
+			};
+		};
+
 		gsbi@12440000 {
 			status = "okay";
 			qcom,mode = <GSBI_PROT_I2C>;
@@ -49,6 +123,54 @@
 			};
 		};
 
+		sata_phy0: phy@1b400000 {
+			status = "okay";
+		};
+
+		sata0: sata@29000000 {
+			status		= "okay";
+			target-supply	= <&pm8921_s4>;
+		};
+
+		/* OTG */
+		usb1_phy: phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		usb3_phy: phy@12520000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		usb4_phy: phy@12530000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l23>;
+		};
+
+		gadget1: gadget@12500000 {
+			status = "okay";
+		};
+
+		/* OTG */
+		usb1: usb@12500000 {
+			status = "okay";
+		};
+
+		usb3: usb@12520000 {
+			status = "okay";
+		};
+
+		usb4: usb@12530000 {
+			status = "okay";
+		};
+
 		amba {
 			/* eMMC */
 			sdcc1: sdcc@12400000 {
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 6c1511263a55..df2061ec630d 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -2,6 +2,7 @@
 
 #include "skeleton.dtsi"
 #include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
 #include <dt-bindings/clock/qcom,mmcc-msm8960.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -112,6 +113,20 @@
 					function = "ps_hold";
 				};
 			};
+
+			i2c1_pins: i2c1 {
+				mux {
+					pins = "gpio20", "gpio21";
+					function = "gsbi1";
+				};
+			};
+
+			i2c3_pins: i2c3 {
+				mux {
+					pins = "gpio8", "gpio9";
+					function = "gsbi3";
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -225,6 +240,26 @@
 			};
 		};
 
+		gsbi3: gsbi@16200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			reg = <0x16200000 0x100>;
+			clocks = <&gcc GSBI3_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			i2c3: i2c@16280000 {
+				compatible = "qcom,i2c-qup-v1.1.1";
+				reg = <0x16280000 0x1000>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+				clocks = <&gcc GSBI3_QUP_CLK>,
+					 <&gcc GSBI3_H_CLK>;
+				clock-names = "core", "iface";
+			};
+		};
+
 		gsbi7: gsbi@16600000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
@@ -235,10 +270,9 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
-
 			syscon-tcsr = <&tcsr>;
 
-			serial@16640000 {
+			gsbi7_serial: serial@16640000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
 				      <0x16600000 0x1000>;
@@ -276,6 +310,143 @@
 			#reset-cells = <1>;
 		};
 
+		l2cc: clock-controller@2011000 {
+			compatible	= "syscon";
+			reg		= <0x2011000 0x1000>;
+		};
+
+		rpm@108000 {
+			compatible	= "qcom,rpm-apq8064";
+			reg		= <0x108000 0x1000>;
+			qcom,ipc	= <&l2cc 0x8 2>;
+
+			interrupts	= <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+					  <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names	= "ack", "err", "wakeup";
+
+			regulators {
+				compatible = "qcom,rpm-pm8921-regulators";
+
+				pm8921_hdmi_switch: hdmi-switch {
+					bias-pull-down;
+				};
+			};
+		};
+
+		usb1_phy: phy@12500000 {
+			compatible	= "qcom,usb-otg-ci";
+			reg		= <0x12500000 0x400>;
+			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			dr_mode		= "host";
+
+			clocks		= <&gcc USB_HS1_XCVR_CLK>,
+					  <&gcc USB_HS1_H_CLK>;
+			clock-names	= "core", "iface";
+
+			resets		= <&gcc USB_HS1_RESET>;
+			reset-names	= "link";
+		};
+
+		usb3_phy: phy@12520000 {
+			compatible	= "qcom,usb-otg-ci";
+			reg		= <0x12520000 0x400>;
+			interrupts	= <GIC_SPI 188 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			dr_mode		= "host";
+
+			clocks		= <&gcc USB_HS3_XCVR_CLK>,
+					  <&gcc USB_HS3_H_CLK>;
+			clock-names	= "core", "iface";
+
+			resets		= <&gcc USB_HS3_RESET>;
+			reset-names	= "link";
+		};
+
+		usb4_phy: phy@12530000 {
+			compatible	= "qcom,usb-otg-ci";
+			reg		= <0x12530000 0x400>;
+			interrupts	= <GIC_SPI 215 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			dr_mode		= "host";
+
+			clocks		= <&gcc USB_HS4_XCVR_CLK>,
+					  <&gcc USB_HS4_H_CLK>;
+			clock-names	= "core", "iface";
+
+			resets		= <&gcc USB_HS4_RESET>;
+			reset-names	= "link";
+		};
+
+		gadget1: gadget@12500000 {
+			compatible	= "qcom,ci-hdrc";
+			reg		= <0x12500000 0x400>;
+			status		= "disabled";
+			dr_mode		= "peripheral";
+			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
+			usb-phy		= <&usb1_phy>;
+		};
+
+		usb1: usb@12500000 {
+			compatible	= "qcom,ehci-host";
+			reg		= <0x12500000 0x400>;
+			interrupts	= <GIC_SPI 100 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			usb-phy		= <&usb1_phy>;
+		};
+
+		usb3: usb@12520000 {
+			compatible	= "qcom,ehci-host";
+			reg		= <0x12520000 0x400>;
+			interrupts	= <GIC_SPI 188 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			usb-phy		= <&usb3_phy>;
+		};
+
+		usb4: usb@12530000 {
+			compatible	= "qcom,ehci-host";
+			reg		= <0x12530000 0x400>;
+			interrupts	= <GIC_SPI 215 IRQ_TYPE_NONE>;
+			status		= "disabled";
+			usb-phy		= <&usb4_phy>;
+		};
+
+		sata_phy0: phy@1b400000 {
+			compatible	= "qcom,apq8064-sata-phy";
+			status		= "disabled";
+			reg		= <0x1b400000 0x200>;
+			reg-names	= "phy_mem";
+			clocks		= <&gcc SATA_PHY_CFG_CLK>;
+			clock-names	= "cfg";
+			#phy-cells	= <0>;
+		};
+
+		sata0: sata@29000000 {
+			compatible		= "generic-ahci";
+			status			= "disabled";
+			reg			= <0x29000000 0x180>;
+			interrupts		= <GIC_SPI 209 IRQ_TYPE_NONE>;
+
+			clocks			= <&gcc SFAB_SATA_S_H_CLK>,
+						<&gcc SATA_H_CLK>,
+						<&gcc SATA_A_CLK>,
+						<&gcc SATA_RXOOB_CLK>,
+						<&gcc SATA_PMALIVE_CLK>;
+			clock-names		= "slave_iface",
+						"iface",
+						"bus",
+						"rxoob",
+						"core_pmalive";
+
+			assigned-clocks		= <&gcc SATA_RXOOB_CLK>,
+						<&gcc SATA_PMALIVE_CLK>;
+			assigned-clock-rates	= <100000000>, <100000000>;
+
+			phys			= <&sata_phy0>;
+			phy-names		= "sata-phy";
+		};
+
 		/* Temporary fixed regulator */
 		vsdcc_fixed: vsdcc-regulator {
 			compatible = "regulator-fixed";
diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 20bbd19b996e..e0b2ce2910e0 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -37,6 +37,11 @@
 		};
 	};
 
+	cpu-pmu {
+		compatible = "qcom,scorpion-mp-pmu";
+		interrupts = <1 9 0x304>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-pm8841.dtsi b/arch/arm/boot/dts/qcom-pm8841.dtsi
index 73813cc118f9..8f1a0b162017 100644
--- a/arch/arm/boot/dts/qcom-pm8841.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8841.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
@@ -7,6 +8,23 @@
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		pm8841_mpps: mpps@a000 {
+			compatible = "qcom,pm8841-mpp";
+			reg = <0xa000 0x400>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
+				     <4 0xa1 0 IRQ_TYPE_NONE>,
+				     <4 0xa2 0 IRQ_TYPE_NONE>,
+				     <4 0xa3 0 IRQ_TYPE_NONE>;
+		};
+
+		temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400 0x100>;
+			interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
+		};
 	};
 
 	usid5: pm8841@5 {
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index 24c5088acea2..aa774e685018 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
@@ -7,12 +9,141 @@
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000 0x100>,
+			      <0x6100 0x100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pwrkey@800 {
+			compatible = "qcom,pm8941-pwrkey";
+			reg = <0x800 0x100>;
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+		};
+
+		pm8941_gpios: gpios@c000 {
+			compatible = "qcom,pm8941-gpio";
+			reg = <0xc000 0x2400>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>,
+				     <0 0xcd 0 IRQ_TYPE_NONE>,
+				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xcf 0 IRQ_TYPE_NONE>,
+				     <0 0xd0 0 IRQ_TYPE_NONE>,
+				     <0 0xd1 0 IRQ_TYPE_NONE>,
+				     <0 0xd2 0 IRQ_TYPE_NONE>,
+				     <0 0xd3 0 IRQ_TYPE_NONE>,
+				     <0 0xd4 0 IRQ_TYPE_NONE>,
+				     <0 0xd5 0 IRQ_TYPE_NONE>,
+				     <0 0xd6 0 IRQ_TYPE_NONE>,
+				     <0 0xd7 0 IRQ_TYPE_NONE>,
+				     <0 0xd8 0 IRQ_TYPE_NONE>,
+				     <0 0xd9 0 IRQ_TYPE_NONE>,
+				     <0 0xda 0 IRQ_TYPE_NONE>,
+				     <0 0xdb 0 IRQ_TYPE_NONE>,
+				     <0 0xdc 0 IRQ_TYPE_NONE>,
+				     <0 0xdd 0 IRQ_TYPE_NONE>,
+				     <0 0xde 0 IRQ_TYPE_NONE>,
+				     <0 0xdf 0 IRQ_TYPE_NONE>,
+				     <0 0xe0 0 IRQ_TYPE_NONE>,
+				     <0 0xe1 0 IRQ_TYPE_NONE>,
+				     <0 0xe2 0 IRQ_TYPE_NONE>,
+				     <0 0xe3 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8941_mpps: mpps@a000 {
+			compatible = "qcom,pm8941-mpp";
+			reg = <0xa000 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>,
+				     <0 0xa4 0 IRQ_TYPE_NONE>,
+				     <0 0xa5 0 IRQ_TYPE_NONE>,
+				     <0 0xa6 0 IRQ_TYPE_NONE>,
+				     <0 0xa7 0 IRQ_TYPE_NONE>;
+		};
+
+		pm8941_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400 0x100>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+			#thermal-sensor-cells = <0>;
+		};
+
+		pm8941_vadc: vadc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100 0x100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+
+			die_temp {
+				reg = <VADC_DIE_TEMP>;
+			};
+			ref_625mv {
+				reg = <VADC_REF_625MV>;
+			};
+			ref_1250v {
+				reg = <VADC_REF_1250MV>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
+
+		pm8941_iadc: iadc@3600 {
+			compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
+			reg = <0x3600 0x100>,
+				  <0x12f1 0x1>;
+			interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
+			qcom,external-resistor-micro-ohms = <10000>;
+		};
 	};
 
 	usid1: pm8941@1 {
-		compatible ="qcom,spmi-pmic";
+		compatible = "qcom,spmi-pmic";
 		reg = <0x1 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		wled@d800 {
+			compatible = "qcom,pm8941-wled";
+			reg = <0xd800 0x100>;
+			label = "backlight";
+
+			qcom,cs-out;
+			qcom,current-limit = <20>;
+			qcom,current-boost-limit = <805>;
+			qcom,switching-freq = <1600>;
+			qcom,ovp = <29>;
+			qcom,num-strings = <2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index a5a4fe695a46..5e240ccc08b7 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -1,3 +1,5 @@
+#include <dt-bindings/iio/qcom,spmi-vadc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus {
@@ -7,6 +9,96 @@
 		reg = <0x0 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000 0x100>,
+			      <0x6100 0x100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
+		pma8084_gpios: gpios@c000 {
+			compatible = "qcom,pma8084-gpio";
+			reg = <0xc000 0x1600>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>,
+				     <0 0xcc 0 IRQ_TYPE_NONE>,
+				     <0 0xcd 0 IRQ_TYPE_NONE>,
+				     <0 0xce 0 IRQ_TYPE_NONE>,
+				     <0 0xcf 0 IRQ_TYPE_NONE>,
+				     <0 0xd0 0 IRQ_TYPE_NONE>,
+				     <0 0xd1 0 IRQ_TYPE_NONE>,
+				     <0 0xd2 0 IRQ_TYPE_NONE>,
+				     <0 0xd3 0 IRQ_TYPE_NONE>,
+				     <0 0xd4 0 IRQ_TYPE_NONE>,
+				     <0 0xd5 0 IRQ_TYPE_NONE>;
+		};
+
+		pma8084_mpps: mpps@a000 {
+			compatible = "qcom,pma8084-mpp";
+			reg = <0xa000 0x800>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
+				     <0 0xa1 0 IRQ_TYPE_NONE>,
+				     <0 0xa2 0 IRQ_TYPE_NONE>,
+				     <0 0xa3 0 IRQ_TYPE_NONE>,
+				     <0 0xa4 0 IRQ_TYPE_NONE>,
+				     <0 0xa5 0 IRQ_TYPE_NONE>,
+				     <0 0xa6 0 IRQ_TYPE_NONE>,
+				     <0 0xa7 0 IRQ_TYPE_NONE>;
+		};
+
+		pma8084_temp: temp-alarm@2400 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0x2400 0x100>;
+			interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <0>;
+			io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
+			io-channel-names = "thermal";
+		};
+
+		pma8084_vadc: vadc@3100 {
+			compatible = "qcom,spmi-vadc";
+			reg = <0x3100 0x100>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+
+			die_temp {
+				reg = <VADC_DIE_TEMP>;
+			};
+			ref_625mv {
+				reg = <VADC_REF_625MV>;
+			};
+			ref_1250v {
+				reg = <VADC_REF_1250MV>;
+			};
+			ref_buf_625mv {
+				reg = <VADC_SPARE1>;
+			};
+			ref_gnd {
+				reg = <VADC_GND_REF>;
+			};
+			ref_vdd {
+				reg = <VADC_VDD_VADC>;
+			};
+		};
 	};
 
 	usid1: pma8084@1 {
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index 81a38ceee098..a4c425923c05 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -147,7 +147,7 @@
 
 &i2c5 {
 	status = "okay";
-	vdd_dvfs: max8973@1b {
+	vdd_dvfs: regulator@1b {
 		compatible = "maxim,max8973";
 		reg = <0x1b>;
 
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 0fd889f88109..7ee22a41c6c9 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -163,6 +163,7 @@
 			     <0 29 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
 		power-domains = <&pd_c4>;
 	};
 
@@ -197,6 +198,7 @@
 			     <0 55 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 56 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 57 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A73A4_CLK_IRQC>;
 		power-domains = <&pd_c4>;
 	};
 
@@ -724,15 +726,16 @@
 		mstp4_clks: mstp4_clks@e6150140 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
-			clocks = <&main_div2_clk>, <&cpg_clocks R8A73A4_CLK_HP>,
+			clocks = <&main_div2_clk>, <&main_div2_clk>,
+				 <&cpg_clocks R8A73A4_CLK_HP>,
 				 <&cpg_clocks R8A73A4_CLK_HP>;
 			#clock-cells = <1>;
 			clock-indices = <
-				R8A73A4_CLK_IIC5 R8A73A4_CLK_IIC4
-				R8A73A4_CLK_IIC3
+				R8A73A4_CLK_IRQC R8A73A4_CLK_IIC5
+				R8A73A4_CLK_IIC4 R8A73A4_CLK_IIC3
 			>;
 			clock-output-names =
-				"iic5", "iic4", "iic3";
+				"irqc", "iic5", "iic4", "iic3";
 		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a73a4-mstp-clocks", "renesas,cpg-mstp-clocks";
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 9bd0cb439f44..2e31d8c01cbf 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -208,7 +208,7 @@
 		gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
 	};
 
-	wm8978: wm8978@1a {
+	wm8978: codec@1a {
 		#sound-dai-cells = <0>;
 		compatible = "wlf,wm8978";
 		reg = <0x1a>;
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 83c1c3ca1b8f..d84714468cce 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -67,7 +67,7 @@
 	};
 
 	/* irqpin0: IRQ0 - IRQ7 */
-	irqpin0: irqpin@e6900000 {
+	irqpin0: interrupt-controller@e6900000 {
 		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -89,7 +89,7 @@
 	};
 
 	/* irqpin1: IRQ8 - IRQ15 */
-	irqpin1: irqpin@e6900004 {
+	irqpin1: interrupt-controller@e6900004 {
 		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -111,7 +111,7 @@
 	};
 
 	/* irqpin2: IRQ16 - IRQ23 */
-	irqpin2: irqpin@e6900008 {
+	irqpin2: interrupt-controller@e6900008 {
 		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -133,7 +133,7 @@
 	};
 
 	/* irqpin3: IRQ24 - IRQ31 */
-	irqpin3: irqpin@e690000c {
+	irqpin3: interrupt-controller@e690000c {
 		compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -275,7 +275,7 @@
 		status = "disabled";
 	};
 
-	scifb8: serial@e6c30000 {
+	scifb: serial@e6c30000 {
 		compatible = "renesas,scifb-r8a7740", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
 		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
index 04c0c37bb784..dffa6ff30360 100644
--- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts
@@ -119,7 +119,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl008k";
+		compatible = "spansion,s25fl008k", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts
index 787fa6f9f46d..90543b12d7e2 100644
--- a/arch/arm/boot/dts/r8a7778-bockw.dts
+++ b/arch/arm/boot/dts/r8a7778-bockw.dts
@@ -85,7 +85,7 @@
 &i2c0 {
 	status = "okay";
 
-	ak4643: sound-codec@12 {
+	ak4643: codec@12 {
 		compatible = "asahi-kasei,ak4643";
 		#sound-dai-cells = <0>;
 		reg = <0x12>;
@@ -186,7 +186,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl008k";
+		compatible = "spansion,s25fl008k", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <104000000>;
 		m25p,fast-read;
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 868f97309533..7ce9f5fd5865 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -68,7 +68,7 @@
 	};
 
 	/* irqpin: IRQ0 - IRQ3 */
-	irqpin: irqpin@fe78001c {
+	irqpin: interrupt-controller@fe78001c {
 		compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index 540756cdf391..20afea6f06ef 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts
@@ -42,10 +42,10 @@
 		regulator-always-on;
 	};
 
-	lan0@18000000 {
+	ethernet@18000000 {
 		compatible = "smsc,lan9220", "smsc,lan9115";
 		reg = <0x18000000 0x100>;
-		pinctrl-0 = <&lan0_pins>;
+		pinctrl-0 = <&ethernet_pins>;
 		pinctrl-names = "default";
 
 		phy-mode = "mii";
@@ -176,7 +176,7 @@
 		};
 	};
 
-	lan0_pins: lan0 {
+	ethernet_pins: ethernet {
 		intc {
 			renesas,groups = "intc_irq1_b";
 			renesas,function = "intc";
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 5c2219b9f3eb..5c8071e87ae9 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -148,7 +148,7 @@
 		interrupt-controller;
 	};
 
-	irqpin0: irqpin@fe780010 {
+	irqpin0: interrupt-controller@fe780010 {
 		compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index aaa4f258e279..2eb8a995ae9f 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -429,7 +429,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
@@ -525,7 +525,7 @@
 
 	clock-frequency = <100000>;
 
-	ak4643: sound-codec@12 {
+	ak4643: codec@12 {
 		compatible = "asahi-kasei,ak4643";
 		#sound-dai-cells = <0>;
 		reg = <0x12>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4bb2f4c17321..51ab8865ea37 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -252,6 +252,7 @@
 			     <0 1 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 2 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 3 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7790_CLK_IRQC>;
 	};
 
 	dmac0: dma-controller@e6700000 {
@@ -370,6 +371,28 @@
 		dma-channels = <13>;
 	};
 
+	usb_dmac0: dma-controller@e65a0000 {
+		compatible = "renesas,usb-dmac";
+		reg = <0 0xe65a0000 0 0x100>;
+		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+			      0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "ch0", "ch1";
+		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
+		#dma-cells = <1>;
+		dma-channels = <2>;
+	};
+
+	usb_dmac1: dma-controller@e65b0000 {
+		compatible = "renesas,usb-dmac";
+		reg = <0 0xe65b0000 0 0x100>;
+		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+			      0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "ch0", "ch1";
+		clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
+		#dma-cells = <1>;
+		dma-channels = <2>;
+	};
+
 	i2c0: i2c@e6508000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -467,6 +490,7 @@
 		dma-names = "tx", "rx";
 		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	mmcif1: mmc@ee220000 {
@@ -478,6 +502,7 @@
 		dma-names = "tx", "rx";
 		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	pfc: pfc@e6060000 {
@@ -531,6 +556,8 @@
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -540,6 +567,8 @@
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -549,6 +578,8 @@
 		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -558,6 +589,8 @@
 		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -567,6 +600,8 @@
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -576,6 +611,8 @@
 		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -585,6 +622,8 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -594,6 +633,8 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -603,6 +644,8 @@
 		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -612,6 +655,8 @@
 		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -650,6 +695,9 @@
 		renesas,buswait = <4>;
 		phys = <&usb0 1>;
 		phy-names = "usb";
+		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+		       <&usb_dmac1 0>, <&usb_dmac1 1>;
+		dma-names = "ch0", "ch1", "ch2", "ch3";
 		status = "disabled";
 	};
 
@@ -1158,6 +1206,14 @@
 				"iic0", "pciec", "iic1", "ssusb", "cmt1",
 				"usbdmac0", "usbdmac1";
 		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7790_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
@@ -1273,7 +1329,7 @@
 
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
 		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
@@ -1285,7 +1341,7 @@
 
 	msiof1: spi@e6e10000 {
 		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+		reg = <0 0xe6e10000 0 0x0064>;
 		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
 		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
@@ -1297,7 +1353,7 @@
 
 	msiof2: spi@e6e00000 {
 		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+		reg = <0 0xe6e00000 0 0x0064>;
 		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
 		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
@@ -1309,7 +1365,7 @@
 
 	msiof3: spi@e6c90000 {
 		compatible = "renesas,msiof-r8a7790";
-		reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
+		reg = <0 0xe6c90000 0 0x0064>;
 		interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
 		dmas = <&dmac0 0x45>, <&dmac0 0x46>;
@@ -1442,7 +1498,7 @@
 		status = "disabled";
 	};
 
-	rcar_sound: rcar_sound@ec500000 {
+	rcar_sound: sound@ec500000 {
 		/*
 		 * #sound-dai-cells is required
 		 *
diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts
index e33e4047b0b0..655d1804e5e9 100644
--- a/arch/arm/boot/dts/r8a7791-henninger.dts
+++ b/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -226,7 +226,7 @@
 	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 824ddab9c3ad..cffe33ff4d16 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -474,7 +474,7 @@
 	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "spansion,s25fl512s";
+		compatible = "spansion,s25fl512s", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <30000000>;
 		spi-tx-bus-width = <4>;
@@ -522,7 +522,7 @@
 	status = "okay";
 	clock-frequency = <100000>;
 
-	ak4643: sound-codec@12 {
+	ak4643: codec@12 {
 		compatible = "asahi-kasei,ak4643";
 		#sound-dai-cells = <0>;
 		reg = <0x12>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 4696062f6dde..dc1cd3f16606 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -239,6 +239,7 @@
 			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7791_CLK_IRQC>;
 	};
 
 	dmac0: dma-controller@e6700000 {
@@ -357,6 +358,28 @@
 		dma-channels = <13>;
 	};
 
+	usb_dmac0: dma-controller@e65a0000 {
+		compatible = "renesas,usb-dmac";
+		reg = <0 0xe65a0000 0 0x100>;
+		interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
+			      0 109 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "ch0", "ch1";
+		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC0>;
+		#dma-cells = <1>;
+		dma-channels = <2>;
+	};
+
+	usb_dmac1: dma-controller@e65b0000 {
+		compatible = "renesas,usb-dmac";
+		reg = <0 0xe65b0000 0 0x100>;
+		interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
+			      0 110 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "ch0", "ch1";
+		clocks = <&mstp3_clks R8A7791_CLK_USBDMAC1>;
+		#dma-cells = <1>;
+		dma-channels = <2>;
+	};
+
 	/* The memory map in the User's Manual maps the cores to bus numbers */
 	i2c0: i2c@e6508000 {
 		#address-cells = <1>;
@@ -471,6 +494,7 @@
 		dma-names = "tx", "rx";
 		reg-io-width = <4>;
 		status = "disabled";
+		max-frequency = <97500000>;
 	};
 
 	sdhi0: sd@ee100000 {
@@ -509,6 +533,8 @@
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -518,6 +544,8 @@
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -527,6 +555,8 @@
 		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -536,6 +566,8 @@
 		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -545,6 +577,8 @@
 		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -554,6 +588,8 @@
 		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -563,6 +599,8 @@
 		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -572,6 +610,8 @@
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -581,6 +621,8 @@
 		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -590,6 +632,8 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -599,6 +643,8 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -608,6 +654,8 @@
 		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -617,6 +665,8 @@
 		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -626,6 +676,8 @@
 		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -635,6 +687,8 @@
 		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -644,6 +698,8 @@
 		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -653,6 +709,8 @@
 		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -662,6 +720,8 @@
 		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -700,6 +760,9 @@
 		renesas,buswait = <4>;
 		phys = <&usb0 1>;
 		phy-names = "usb";
+		dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
+		       <&usb_dmac1 0>, <&usb_dmac1 1>;
+		dma-names = "ch0", "ch1", "ch2", "ch3";
 		status = "disabled";
 	};
 
@@ -1160,6 +1223,14 @@
 				"mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
 				"usbdmac0", "usbdmac1";
 		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7791_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
 		mstp5_clks: mstp5_clks@e6150144 {
 			compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
@@ -1288,7 +1359,7 @@
 
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
+		reg = <0 0xe6e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
 		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
@@ -1300,7 +1371,7 @@
 
 	msiof1: spi@e6e10000 {
 		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
+		reg = <0 0xe6e10000 0 0x0064>;
 		interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
 		dmas = <&dmac0 0x55>, <&dmac0 0x56>;
@@ -1312,7 +1383,7 @@
 
 	msiof2: spi@e6e00000 {
 		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
+		reg = <0 0xe6e00000 0 0x0064>;
 		interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
 		dmas = <&dmac0 0x41>, <&dmac0 0x42>;
@@ -1485,7 +1556,7 @@
 		status = "disabled";
 	};
 
-	rcar_sound: rcar_sound@ec500000 {
+	rcar_sound: sound@ec500000 {
 		/*
 		 * #sound-dai-cells is required
 		 *
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 7a3ffa51a8bf..b73819423311 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -105,6 +105,7 @@
 			     <0 15 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 16 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 17 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp4_clks R8A7794_CLK_IRQC>;
 	};
 
 	dmac0: dma-controller@e6700000 {
@@ -173,6 +174,8 @@
 		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x21>, <&dmac0 0x22>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -182,6 +185,8 @@
 		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x25>, <&dmac0 0x26>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -191,6 +196,8 @@
 		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x27>, <&dmac0 0x28>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -200,6 +207,8 @@
 		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -209,6 +218,8 @@
 		interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -218,6 +229,8 @@
 		interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x23>, <&dmac0 0x24>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -227,6 +240,8 @@
 		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -236,6 +251,8 @@
 		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -245,6 +262,8 @@
 		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -254,6 +273,8 @@
 		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -263,6 +284,8 @@
 		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -272,6 +295,8 @@
 		interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -281,6 +306,8 @@
 		interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF3>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -290,6 +317,8 @@
 		interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF4>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -299,6 +328,8 @@
 		interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_SCIF5>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -308,6 +339,8 @@
 		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -317,6 +350,8 @@
 		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -326,6 +361,8 @@
 		interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>;
 		clock-names = "sci_ick";
+		dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
+		dma-names = "tx", "rx";
 		status = "disabled";
 	};
 
@@ -625,6 +662,14 @@
 			        "sdhi2", "sdhi1", "sdhi0",
 				"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
 		};
+		mstp4_clks: mstp4_clks@e6150140 {
+			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
+			reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+			clocks = <&cp_clk>;
+			#clock-cells = <1>;
+			clock-indices = <R8A7794_CLK_IRQC>;
+			clock-output-names = "irqc";
+		};
 		mstp7_clks: mstp7_clks@e615014c {
 			compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
 			reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index baf21ac6ce7f..b299b26926d4 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -2,15 +2,43 @@
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 41ffd4951ef3..d32229b8a996 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -2,15 +2,43 @@
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index bdf85701987d..42faa19edb7e 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -1,15 +1,43 @@
 /*
  * Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -152,6 +180,7 @@
 		compatible = "active-semi,act8846";
 		reg = <0x5a>;
 		status = "okay";
+		system-power-controller;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&act8846_dvs0_ctl>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 1d4d79c6688d..0f23aedf9349 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -2,15 +2,43 @@
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts
index 1687e8336994..43949a6771f0 100644
--- a/arch/arm/boot/dts/rk3288-evb-act8846.dts
+++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts
@@ -1,13 +1,41 @@
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-evb-rk808.dts b/arch/arm/boot/dts/rk3288-evb-rk808.dts
index f62ea78754a9..18eb6cb495f4 100644
--- a/arch/arm/boot/dts/rk3288-evb-rk808.dts
+++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts
@@ -1,13 +1,41 @@
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index 4a457518d861..844a6fb64658 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -1,13 +1,41 @@
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/pwm/pwm.h>
@@ -112,6 +140,23 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * NOTE: vcc_sd isn't hooked up on v1.0 boards where power comes from
+	 * vcc_io directly.  Those boards won't be able to power cycle SD cards
+	 * but it shouldn't hurt to toggle this pin there anyway.
+	 */
+	vcc_sd: sdmmc-regulator {
+		compatible = "regulator-fixed";
+		gpio = <&gpio7 11 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwr>;
+		regulator-name = "vcc_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
+	};
 };
 
 &emmc {
@@ -141,6 +186,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
+	vmmc-supply = <&vcc_sd>;
+	vqmmc-supply = <&vccio_sd>;
 };
 
 &i2c0 {
@@ -232,6 +279,10 @@
 		sdmmc_cmd: sdmmc-cmd {
 			rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
 		};
+
+		sdmmc_pwr: sdmmc-pwr {
+			rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	usb {
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index b54dd78580c1..0b42372e4379 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -246,6 +246,14 @@
 		pinctrl-0 = <&pmic_vsel>, <&pwr_hold>;
 		system-power-controller;
 
+		vp1-supply = <&vcc_sys>;
+		vp2-supply = <&vcc_sys>;
+		vp3-supply = <&vcc_sys>;
+		vp4-supply = <&vcc_sys>;
+		inl1-supply = <&vcc_sys>;
+		inl2-supply = <&vcc_sys>;
+		inl3-supply = <&vcc_20>;
+
 		regulators {
 			vcc_ddr: REG1 {
 				regulator-name = "vcc_ddr";
@@ -457,6 +465,12 @@
 	status = "okay";
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts
index d081f0e0da36..d582811fbd7b 100644
--- a/arch/arm/boot/dts/rk3288-popmetal.dts
+++ b/arch/arm/boot/dts/rk3288-popmetal.dts
@@ -406,6 +406,12 @@
 	};
 };
 
+&tsadc {
+	rockchip,hw-tshut-mode = <0>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
 &vopb {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3288-thermal.dtsi b/arch/arm/boot/dts/rk3288-thermal.dtsi
index 2695200c0af7..340406652186 100644
--- a/arch/arm/boot/dts/rk3288-thermal.dtsi
+++ b/arch/arm/boot/dts/rk3288-thermal.dtsi
@@ -3,9 +3,43 @@
  *
  * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
  *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/thermal/thermal.h>
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 165968d51d8f..22316d00493e 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -1,13 +1,41 @@
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -44,6 +72,14 @@
 		spi2 = &spi2;
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a12-pmu";
+		interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -434,6 +470,7 @@
 		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_USBHOST1>;
 		clock-names = "otg";
+		dr_mode = "host";
 		phys = <&usbphy2>;
 		phy-names = "usb2-phy";
 		status = "disabled";
@@ -446,6 +483,11 @@
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_OTG0>;
 		clock-names = "otg";
+		dr_mode = "otg";
+		g-np-tx-fifo-size = <16>;
+		g-rx-fifo-size = <275>;
+		g-tx-fifo-size = <256 128 128 64 64 32>;
+		g-use-dma;
 		phys = <&usbphy0>;
 		phy-names = "usb2-phy";
 		status = "disabled";
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index c54a9715dcfa..a2ae9f32464d 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -2,15 +2,43 @@
  * Copyright (c) 2013 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index ea92fd69529a..f257926c13b7 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -31,55 +31,55 @@
 			#clock-cells = <0>;
 		};
 	};
+};
 
-	serial@50000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
-	};
+&rtc {
+	status = "okay";
+};
 
-	serial@50004000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
-	};
+&sdhci_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
+			<&sd1_bus1>, <&sd1_bus4>;
+	bus-width = <4>;
+	broken-cd;
+	status = "okay";
+};
 
-	serial@50008000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart2_data>;
-	};
+&sdhci_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
+			<&sd0_bus1>, <&sd0_bus4>;
+	bus-width = <4>;
+	cd-gpios = <&gpf 1 0>;
+	cd-inverted;
+	status = "okay";
+};
 
-	serial@5000C000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart3_data>;
-	};
+&uart_0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_data>, <&uart0_fctl>;
+};
 
-	watchdog@53000000 {
-		status = "okay";
-	};
+&uart_1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_data>, <&uart1_fctl>;
+};
 
-	rtc@57000000 {
-		status = "okay";
-	};
+&uart_2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_data>;
+};
 
-	sdhci@4AC00000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd0_clk>, <&sd0_cmd>,
-				<&sd0_bus1>, <&sd0_bus4>;
-		bus-width = <4>;
-		cd-gpios = <&gpf 1 0>;
-		cd-inverted;
-		status = "okay";
-	};
+&uart_3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_data>;
+};
 
-	sdhci@4A800000 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&sd1_clk>, <&sd1_cmd>,
-				<&sd1_bus1>, <&sd1_bus4>;
-		bus-width = <4>;
-		broken-cd;
-		status = "okay";
-	};
+&watchdog {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 30b8f7e47454..a5184ff56933 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -17,7 +17,7 @@
 	compatible = "samsung,s3c2416";
 
 	aliases {
-		serial3 = &uart3;
+		serial3 = &uart_3;
 	};
 
 	cpus {
@@ -48,7 +48,7 @@
 		clock-names = "timers";
 	};
 
-	serial@50000000 {
+	uart_0: serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
 		clock-names = "uart", "clk_uart_baud2",
 				"clk_uart_baud3";
@@ -56,7 +56,7 @@
 				<&clocks SCLK_UART>;
 	};
 
-	serial@50004000 {
+	uart_1: serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
 		clock-names = "uart", "clk_uart_baud2",
 				"clk_uart_baud3";
@@ -64,7 +64,7 @@
 				<&clocks SCLK_UART>;
 	};
 
-	serial@50008000 {
+	uart_2: serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
 		clock-names = "uart", "clk_uart_baud2",
 				"clk_uart_baud3";
@@ -72,7 +72,7 @@
 				<&clocks SCLK_UART>;
 	};
 
-	uart3: serial@5000C000 {
+	uart_3: serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
@@ -83,7 +83,7 @@
 		status = "disabled";
 	};
 
-	sdhci@4AC00000 {
+	sdhci_1: sdhci@4AC00000 {
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
@@ -94,7 +94,7 @@
 		status = "disabled";
 	};
 
-	sdhci@4A800000 {
+	sdhci_0: sdhci@4A800000 {
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
@@ -105,13 +105,13 @@
 		status = "disabled";
 	};
 
-	watchdog@53000000 {
+	watchdog: watchdog@53000000 {
 		interrupts = <1 9 27 3>;
 		clocks = <&clocks PCLK_WDT>;
 		clock-names = "watchdog";
 	};
 
-	rtc@57000000 {
+	rtc: rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
 		clocks = <&clocks PCLK_RTC>;
 		clock-names = "rtc";
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 57ab8587f7b9..5ab7548e04e1 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1439,9 +1439,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
-				 <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -1449,8 +1448,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ehci_clk", "uhpck";
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
 
@@ -1478,7 +1477,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <
-					0x70000000 0x10000000	/* NFC Command Registers */
+					0x70000000 0x08000000	/* NFC Command Registers */
 					0xffffc000 0x00000070	/* NFC HSMC regs */
 					0x00200000 0x00100000	/* NFC SRAM banks */
 					>;
diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi
index 7d6babdab039..2cf9c3611db6 100644
--- a/arch/arm/boot/dts/sama5d3xcm.dtsi
+++ b/arch/arm/boot/dts/sama5d3xcm.dtsi
@@ -11,7 +11,8 @@
 	compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		bootargs = "rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory {
@@ -67,12 +68,6 @@
 					rxd3-skew-ps = <400>;
 				};
 			};
-
-			pmc: pmc@fffffc00 {
-				main: mainck {
-					clock-frequency = <12000000>;
-				};
-			};
 		};
 
 		nand0: nand@60000000 {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 6b1bb58f9c0b..653a1f851f2b 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -59,6 +59,10 @@
 		serial0 = &usart3;
 		serial1 = &usart4;
 		serial2 = &usart2;
+		serial3 = &usart0;
+		serial4 = &usart1;
+		serial5 = &uart0;
+		serial6 = &uart1;
 		gpio0 = &pioA;
 		gpio1 = &pioB;
 		gpio2 = &pioC;
@@ -254,9 +258,8 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
-				 <&uhpck>;
-			clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
+			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
@@ -264,8 +267,8 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <46 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>, <&uhpck>;
-			clock-names = "usb_clk", "ehci_clk", "uhpck";
+			clocks = <&utmi>, <&uhphs_clk>;
+			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
 
@@ -299,7 +302,7 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <
-					0x90000000 0x10000000	/* NFC Command Registers */
+					0x90000000 0x08000000	/* NFC Command Registers */
 					0xfc05c000 0x00000070	/* NFC HSMC regs */
 					0x00100000 0x00100000	/* NFC SRAM banks */
                                          >;
@@ -847,6 +850,24 @@
 				clock-names = "mci_clk";
 			};
 
+			uart0: serial@f8004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8004000 0x100>;
+				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(22))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(23))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0>;
+				clocks = <&uart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
 			ssc0: ssc@f8008000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf8008000 0x4000>;
@@ -977,6 +998,42 @@
 				reg = <0xf8028000 0x60>;
 			};
 
+			usart0: serial@f802c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf802c000 0x100>;
+				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(36))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(37))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts &pinctrl_usart0_cts>;
+				clocks = <&usart0_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
+			usart1: serial@f8030000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8030000 0x100>;
+				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(38))>,
+				       <&dma0
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(39))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts &pinctrl_usart1_cts>;
+				clocks = <&usart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
 			mmc1: mmc@fc000000 {
 				compatible = "atmel,hsmci";
 				reg = <0xfc000000 0x600>;
@@ -994,6 +1051,24 @@
 				clock-names = "mci_clk";
 			};
 
+			uart1: serial@fc004000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfc004000 0x100>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(24))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(25))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1>;
+				clocks = <&uart1_clk>;
+				clock-names = "usart";
+				status = "disabled";
+			};
+
 			usart2: serial@fc008000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfc008000 0x100>;
@@ -1066,6 +1141,46 @@
 				status = "disabled";
 			};
 
+			spi1: spi@fc018000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc018000 0x100>;
+				interrupts = <38 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(12))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(13))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1>;
+				clocks = <&spi1_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
+			spi2: spi@fc01c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "atmel,at91rm9200-spi";
+				reg = <0xfc01c000 0x100>;
+				interrupts = <39 IRQ_TYPE_LEVEL_HIGH 3>;
+				dmas = <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(14))>,
+				       <&dma1
+					(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(15))>;
+				dma-names = "tx", "rx";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi2>;
+				clocks = <&spi2_clk>;
+				clock-names = "spi_clk";
+				status = "disabled";
+			};
+
 			tcb1: timer@fc020000 {
 				compatible = "atmel,at91sam9x5-tcb";
 				reg = <0xfc020000 0x100>;
@@ -1125,10 +1240,10 @@
 				compatible = "atmel,at91sam9g46-aes";
 				reg = <0xfc044000 0x100>;
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(41)>,
-				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(40)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(41))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(40))>;
 				dma-names = "tx", "rx";
 				clocks = <&aes_clk>;
 				clock-names = "aes_clk";
@@ -1139,10 +1254,10 @@
 				compatible = "atmel,at91sam9g46-tdes";
 				reg = <0xfc04c000 0x100>;
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(42)>,
-				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(43)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(42))>,
+				       <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(43))>;
 				dma-names = "tx", "rx";
 				clocks = <&tdes_clk>;
 				clock-names = "tdes_clk";
@@ -1153,8 +1268,8 @@
 				compatible = "atmel,at91sam9g46-sha";
 				reg = <0xfc050000 0x100>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 0>;
-				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1))
-					AT91_XDMAC_DT_PERID(44)>;
+				dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
+					| AT91_XDMAC_DT_PERID(44))>;
 				dma-names = "tx";
 				clocks = <&sha_clk>;
 				clock-names = "sha_clk";
@@ -1232,7 +1347,8 @@
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
-				ranges = <0xfc06a000 0xfc06a000 0x4000>;
+				ranges = <0xfc068000 0xfc068000 0x100
+					  0xfc06a000 0xfc06a000 0x4000>;
 				/* WARNING: revisit as pin spec has changed */
 				atmel,mux-mask = <
 					/*   A          B          C  */
@@ -1623,6 +1739,74 @@
 					};
 				};
 
+				spi1 {
+					pinctrl_spi1: spi1-0 {
+						atmel,pins =
+							<AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MISO */
+							 AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_MOSI */
+							 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* SPI1_SPCK */
+							>;
+					};
+				};
+
+				spi2 {
+					pinctrl_spi2: spi2-0 {
+						atmel,pins =
+							<AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MISO conflicts with RTS0 */
+							 AT91_PIOD 13 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_MOSI conflicts with TXD0 */
+							 AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE	/* SPI2_SPCK conflicts with RTS1 */
+							>;
+					};
+				};
+
+				uart0 {
+					pinctrl_uart0: uart0-0 {
+						atmel,pins =
+							<AT91_PIOE 29 AT91_PERIPH_B AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOE 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				uart1 {
+					pinctrl_uart1: uart1-0 {
+						atmel,pins =
+							<AT91_PIOC 25 AT91_PERIPH_C AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOC 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+				};
+
+				usart0 {
+					pinctrl_usart0: usart0-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart0_rts: usart0_rts-0 {
+						atmel,pins = <AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart0_cts: usart0_cts-0 {
+						atmel,pins = <AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				usart1 {
+					pinctrl_usart1: usart1-0 {
+						atmel,pins =
+							<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE		/* RXD */
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* TXD */
+							>;
+					};
+					pinctrl_usart1_rts: usart1_rts-0 {
+						atmel,pins = <AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+					pinctrl_usart1_cts: usart1_cts-0 {
+						atmel,pins = <AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
index 022ba505f573..24b4cd24dceb 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -147,6 +147,7 @@
 			gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			label = "SW1";
+			gpio-key,wakeup;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index 45b539ce4d35..11e17c5f26e2 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -90,7 +90,7 @@
 		status = "disabled";
 	};
 
-	irqpin0: irqpin@e6900000 {
+	irqpin0: interrupt-controller@e6900000 {
 		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -112,7 +112,7 @@
 		control-parent;
 	};
 
-	irqpin1: irqpin@e6900004 {
+	irqpin1: interrupt-controller@e6900004 {
 		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -134,7 +134,7 @@
 		control-parent;
 	};
 
-	irqpin2: irqpin@e6900008 {
+	irqpin2: interrupt-controller@e6900008 {
 		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -156,7 +156,7 @@
 		control-parent;
 	};
 
-	irqpin3: irqpin@e690000c {
+	irqpin3: interrupt-controller@e690000c {
 		compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin";
 		#interrupt-cells = <2>;
 		interrupt-controller;
@@ -376,7 +376,7 @@
 		status = "disabled";
 	};
 
-	scifb8: serial@e6c30000 {
+	scifb: serial@e6c30000 {
 		compatible = "renesas,scifb-sh73a0", "renesas,scifb";
 		reg = <0xe6c30000 0x100>;
 		interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index d9176e606173..80f924deed37 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -36,6 +36,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "altr,socfpga-smp";
 
 		cpu@0 {
 			compatible = "arm,cortex-a9";
@@ -451,6 +452,14 @@
 						clk-phase = <0 135>;
 					};
 
+					sdmmc_clk_divided: sdmmc_clk_divided {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-gate-clk";
+						clocks = <&sdmmc_clk>;
+						clk-gate = <0xa0 8>;
+						fixed-divider = <4>;
+					};
+
 					nand_x_clk: nand_x_clk {
 						#clock-cells = <0>;
 						compatible = "altr,socfpga-gate-clk";
@@ -488,6 +497,8 @@
 			reset-names = "stmmaceth";
 			snps,multicast-filter-bins = <256>;
 			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
 			status = "disabled";
 		};
 
@@ -504,6 +515,8 @@
 			reset-names = "stmmaceth";
 			snps,multicast-filter-bins = <256>;
 			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
 			status = "disabled";
 		};
 
@@ -635,7 +648,7 @@
 			fifo-depth = <0x400>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-			clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
 		};
 
@@ -655,6 +668,11 @@
 			status = "disabled";
 		};
 
+		scu: snoop-control-unit@fffec000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xfffec000 0x100>;
+		};
+
 		spi1: spi@fff01000 {
 			compatible = "snps,dw-apb-ssi";
 			#address-cells = <1>;
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4be75960a603..4779b07310df 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -21,21 +21,10 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-	aliases {
-		ethernet0 = &gmac0;
-		ethernet1 = &gmac1;
-		ethernet2 = &gmac2;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		timer0 = &timer0;
-		timer1 = &timer1;
-		timer2 = &timer2;
-		timer3 = &timer3;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "altr,socfpga-a10-smp";
 
 		cpu@0 {
 			compatible = "arm,cortex-a9";
@@ -98,6 +87,21 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
+					cb_intosc_hs_div2_clk: cb_intosc_hs_div2_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					cb_intosc_ls_clk: cb_intosc_ls_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
+					f2s_free_clk: f2s_free_clk {
+						#clock-cells = <0>;
+						compatible = "fixed-clock";
+					};
+
 					osc1: osc1 {
 						#clock-cells = <0>;
 						compatible = "fixed-clock";
@@ -107,47 +111,338 @@
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x40>;
+
+						main_mpu_base_clk: main_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x140 0 11>;
+						};
+
+						main_noc_base_clk: main_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							div-reg = <0x144 0 11>;
+						};
+
+						main_emaca_clk: main_emaca_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x68>;
+						};
+
+						main_emacb_clk: main_emacb_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x6C>;
+						};
+
+						main_emac_ptp_clk: main_emac_ptp_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x70>;
+						};
+
+						main_gpio_db_clk: main_gpio_db_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x74>;
+						};
+
+						main_sdmmc_clk: main_sdmmc_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk"
+;
+							clocks = <&main_pll>;
+							reg = <0x78>;
+						};
+
+						main_s2f_usr0_clk: main_s2f_usr0_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x7C>;
+						};
+
+						main_s2f_usr1_clk: main_s2f_usr1_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x80>;
+						};
+
+						main_hmc_pll_ref_clk: main_hmc_pll_ref_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x84>;
+						};
+
+						main_periph_ref_clk: main_periph_ref_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&main_pll>;
+							reg = <0x9C>;
+						};
 					};
 
 					periph_pll: periph_pll {
 						#address-cells = <1>;
 						#size-cells = <0>;
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-pll-clock";
-						clocks = <&osc1>;
+						compatible = "altr,socfpga-a10-pll-clock";
+						clocks = <&osc1>, <&cb_intosc_ls_clk>,
+							 <&f2s_free_clk>, <&main_periph_ref_clk>;
+						reg = <0xC0>;
+
+						peri_mpu_base_clk: peri_mpu_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x140 16 11>;
+						};
+
+						peri_noc_base_clk: peri_noc_base_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							div-reg = <0x144 16 11>;
+						};
+
+						peri_emaca_clk: peri_emaca_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xE8>;
+						};
+
+						peri_emacb_clk: peri_emacb_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xEC>;
+						};
+
+						peri_emac_ptp_clk: peri_emac_ptp_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF0>;
+						};
+
+						peri_gpio_db_clk: peri_gpio_db_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF4>;
+						};
+
+						peri_sdmmc_clk: peri_sdmmc_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xF8>;
+						};
+
+						peri_s2f_usr0_clk: peri_s2f_usr0_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0xFC>;
+						};
+
+						peri_s2f_usr1_clk: peri_s2f_usr1_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x100>;
+						};
+
+						peri_hmc_pll_ref_clk: peri_hmc_pll_ref_clk {
+							#clock-cells = <0>;
+							compatible = "altr,socfpga-a10-perip-clk";
+							clocks = <&periph_pll>;
+							reg = <0x104>;
+						};
+					};
+
+					mpu_free_clk: mpu_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_mpu_base_clk>, <&peri_mpu_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x60>;
+					};
+
+					noc_free_clk: noc_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_noc_base_clk>, <&peri_noc_base_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x64>;
+					};
+
+					s2f_user1_free_clk: s2f_user1_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_s2f_usr1_clk>, <&peri_s2f_usr1_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						reg = <0x104>;
+					};
+
+					sdmmc_free_clk: sdmmc_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&main_sdmmc_clk>, <&peri_sdmmc_clk>,
+							 <&osc1>, <&cb_intosc_hs_div2_clk>,
+							 <&f2s_free_clk>;
+						fixed-divider = <4>;
+						reg = <0xF8>;
+					};
+
+					l4_sys_free_clk: l4_sys_free_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-perip-clk";
+						clocks = <&noc_free_clk>;
+						fixed-divider = <4>;
+					};
+
+					l4_main_clk: l4_main_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 0 2>;
+						clk-gate = <0x48 1>;
+					};
+
+					l4_mp_clk: l4_mp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 8 2>;
+						clk-gate = <0x48 2>;
+					};
+
+					l4_sp_clk: l4_sp_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&noc_free_clk>;
+						div-reg = <0xA8 16 2>;
+						clk-gate = <0x48 3>;
+					};
+
+					mpu_periph_clk: mpu_periph_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&mpu_free_clk>;
+						fixed-divider = <4>;
+						clk-gate = <0x48 0>;
+					};
+
+					sdmmc_clk: sdmmc_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&sdmmc_free_clk>;
+						clk-gate = <0xC8 5>;
+					};
+
+					qspi_clk: qspi_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 11>;
+					};
+
+					nand_clk: nand_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 10>;
+					};
+
+					spi_m_clk: spi_m_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_main_clk>;
+						clk-gate = <0xC8 9>;
+					};
+
+					usb_clk: usb_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&l4_mp_clk>;
+						clk-gate = <0xC8 8>;
+					};
+
+					s2f_usr1_clk: s2f_usr1_clk {
+						#clock-cells = <0>;
+						compatible = "altr,socfpga-a10-gate-clk";
+						clocks = <&peri_s2f_usr1_clk>;
+						clk-gate = <0xC8 6>;
 					};
 				};
 		};
 
 		gmac0: ethernet@ff800000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
 			reg = <0xff800000 0x2000>;
 			interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			/* Filled in by bootloader */
 			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
 		gmac1: ethernet@ff802000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
 		        reg = <0xff802000 0x2000>;
 			interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			/* Filled in by bootloader */
 			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
 		gmac2: ethernet@ff804000 {
 			compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+			altr,sysmgr-syscon = <&sysmgr 0x4C 0>;
 			reg = <0xff804000 0x2000>;
 			interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			/* Filled in by bootloader */
 			mac-address = [00 00 00 00 00 00];
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <16384>;
+			clocks = <&l4_mp_clk>;
+			clock-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -279,6 +574,9 @@
 			reg = <0xff808000 0x1000>;
 			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			fifo-depth = <0x400>;
+			clocks = <&l4_mp_clk>, <&sdmmc_free_clk>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
 		};
 
 		ocram: sram@ffe00000 {
@@ -292,9 +590,15 @@
 			reg = <0xffd05000 0x100>;
 		};
 
+		scu: snoop-control-unit@ffffc000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xffffc000 0x100>;
+		};
+
 		sysmgr: sysmgr@ffd06000 {
 			compatible = "altr,sys-mgr", "syscon";
 			reg = <0xffd06000 0x300>;
+			cpu1-start-addr = <0xffd06230>;
 		};
 
 		/* Local timer */
@@ -302,30 +606,39 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xffffc600 0x100>;
 			interrupts = <1 13 0xf04>;
+			clocks = <&mpu_periph_clk>;
 		};
 
 		timer0: timer0@ffc02700 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffc02700 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer1: timer1@ffc02800 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffc02800 0x100>;
+			clocks = <&l4_sp_clk>;
+			clock-names = "timer";
 		};
 
 		timer2: timer2@ffd00000 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffd00000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
 		};
 
 		timer3: timer3@ffd00100 {
 			compatible = "snps,dw-apb-timer";
 			interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0xffd01000 0x100>;
+			clocks = <&l4_sys_free_clk>;
+			clock-names = "timer";
 		};
 
 		uart0: serial0@ffc02000 {
@@ -334,6 +647,7 @@
 			interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			status = "disabled";
 		};
 
 		uart1: serial1@ffc02100 {
@@ -342,6 +656,8 @@
 			interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
+			clocks = <&l4_sp_clk>;
+			status = "disabled";
 		};
 
 		usbphy0: usbphy@0 {
@@ -354,6 +670,8 @@
 			compatible = "snps,dwc2";
 			reg = <0xffb00000 0xffff>;
 			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_clk>;
+			clock-names = "otg";
 			phys = <&usbphy0>;
 			phy-names = "usb2-phy";
 			status = "disabled";
@@ -372,6 +690,7 @@
 			compatible = "snps,dw-wdt";
 			reg = <0xffd00200 0x100>;
 			interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
 			status = "disabled";
 		};
 
@@ -379,6 +698,7 @@
 			compatible = "snps,dw-wdt";
 			reg = <0xffd00300 0x100>;
 			interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&l4_sys_free_clk>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
new file mode 100644
index 000000000000..94a0709b2fe6
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi
@@ -0,0 +1,74 @@
+/*
+ * Copyright (C) 2015 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "socfpga_arria10.dtsi"
+
+/ {
+	model = "Altera SOCFPGA Arria 10";
+	compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootwait";
+	};
+
+	memory {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		clkmgr@ffd04000 {
+			clocks {
+				osc1 {
+					clock-frequency = <25000000>;
+				};
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	/*
+	 * These skews assume the user's FPGA design is adding 600ps of delay
+	 * for TX_CLK on Arria 10.
+	 *
+	 * All skews are offset since hardware skew values for the ksz9031
+	 * range from a negative skew to a positive skew.
+	 * See the micrel-ksz90x1.txt Documentation file for details.
+	 */
+	txd0-skew-ps = <0>; /* -420ps */
+	txd1-skew-ps = <0>; /* -420ps */
+	txd2-skew-ps = <0>; /* -420ps */
+	txd3-skew-ps = <0>; /* -420ps */
+	rxd0-skew-ps = <420>; /* 0ps */
+	rxd1-skew-ps = <420>; /* 0ps */
+	rxd2-skew-ps = <420>; /* 0ps */
+	rxd3-skew-ps = <420>; /* 0ps */
+	txen-skew-ps = <0>; /* -420ps */
+	txc-skew-ps = <1860>; /* 960ps */
+	rxdv-skew-ps = <420>; /* 0ps */
+	rxc-skew-ps = <1680>; /* 780ps */
+	max-frame-size = <3800>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index 3015ce8d3057..dbbb751ac1ba 100755..100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ * Copyright (C) 2014-2015 Altera Corporation <www.altera.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -16,33 +16,11 @@
  */
 
 /dts-v1/;
-#include "socfpga_arria10.dtsi"
+#include "socfpga_arria10_socdk.dtsi"
 
-/ {
-	model = "Altera SOCFPGA Arria 10";
-	compatible = "altr,socfpga-arria10", "altr,socfpga";
-
-	chosen {
-		bootargs = "console=ttyS0,115200 rootwait";
-	};
-
-	memory {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x40000000>; /* 1GB */
-	};
-
-	soc {
-		clkmgr@ffd04000 {
-			clocks {
-				osc1 {
-					clock-frequency = <25000000>;
-				};
-			};
-		};
-
-		serial0@ffc02000 {
-			status = "okay";
-		};
-	};
+&mmc {
+	status = "okay";
+	num-slots = <1>;
+	broken-cd;
+	bus-width = <4>;
 };
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
index 16ea6f5f2ab8..71468a7eb28f 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_sockit.dts
@@ -68,3 +68,19 @@
 &usb1 {
 	status = "okay";
 };
+
+&gpio2 {
+	status = "okay";
+};
+
+&i2c1{
+	status = "okay";
+
+	accel1: accel1@53{
+		compatible = "adxl34x";
+		reg = <0x53>;
+
+		interrupt-parent = < &portc >;
+		interrupts = <3 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
index a1814b457450..019dd2fea208 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_socrates.dts
@@ -30,12 +30,23 @@
 		device_type = "memory";
 		reg = <0x0 0x40000000>; /* 1GB */
 	};
+
+	leds: gpio-leds {
+	};
 };
 
 &gmac1 {
 	status = "okay";
 };
 
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -45,6 +56,26 @@
 	};
 };
 
+&leds {
+	compatible = "gpio-leds";
+
+	led@0 {
+		label = "led:green:heartbeat";
+		gpios = <&porta 28 1>;
+		linux,default-trigger = "heartbeat";
+	};
+
+	led@1 {
+		label = "led:green:D7";
+		gpios = <&portb 19 1>;
+	};
+
+	led@2 {
+		label = "led:green:D8";
+		gpios = <&portb 25 1>;
+	};
+};
+
 &mmc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index 2201cd5da3bb..853684ad7773 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -22,6 +22,160 @@
 		interrupt-parent = <&intc>;
 		ranges;
 
+		cpus {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cpu-map {
+				cluster0 {
+					core0 {
+						cpu = <&CPU0>;
+					};
+					core1 {
+						cpu = <&CPU1>;
+					};
+				};
+			};
+			CPU0: cpu@0 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a9";
+				reg = <0>;
+			};
+			CPU1: cpu@1 {
+				device_type = "cpu";
+				compatible = "arm,cortex-a9";
+				reg = <1>;
+			};
+		};
+
+		ptm@801ae000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801ae000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU0>;
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port0>;
+				};
+			};
+		};
+
+		ptm@801af000 {
+			compatible = "arm,coresight-etm3x", "arm,primecell";
+			reg = <0x801af000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			cpu = <&CPU1>;
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel_in_port1>;
+				};
+			};
+		};
+
+		funnel@801a6000 {
+			compatible = "arm,coresight-funnel", "arm,primecell";
+			reg = <0x801a6000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* funnel output ports */
+				port@0 {
+					reg = <0>;
+					funnel_out_port: endpoint {
+						remote-endpoint =
+							<&replicator_in_port0>;
+					};
+				};
+
+				/* funnel input ports */
+				port@1 {
+					reg = <0>;
+					funnel_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&ptm0_out_port>;
+					};
+				};
+
+				port@2 {
+					reg = <1>;
+					funnel_in_port1: endpoint {
+						slave-mode;
+						remote-endpoint = <&ptm1_out_port>;
+					};
+				};
+			};
+		};
+
+		replicator {
+			compatible = "arm,coresight-replicator";
+			clocks = <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "atclk";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* replicator output ports */
+				port@0 {
+					reg = <0>;
+					replicator_out_port0: endpoint {
+						remote-endpoint = <&tpiu_in_port>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					replicator_out_port1: endpoint {
+						remote-endpoint = <&etb_in_port>;
+					};
+				};
+
+				/* replicator input port */
+				port@2 {
+					reg = <0>;
+					replicator_in_port0: endpoint {
+						slave-mode;
+						remote-endpoint = <&funnel_out_port>;
+					};
+				};
+			};
+		};
+
+		tpiu@80190000 {
+			compatible = "arm,coresight-tpiu", "arm,primecell";
+			reg = <0x80190000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			port {
+				tpiu_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port0>;
+				};
+			};
+		};
+
+		etb@801a4000 {
+			compatible = "arm,coresight-etb10", "arm,primecell";
+			reg = <0x801a4000 0x1000>;
+
+			clocks = <&prcmu_clk PRCMU_APETRACECLK>, <&prcmu_clk PRCMU_APEATCLK>;
+			clock-names = "apb_pclk", "atclk";
+			port {
+				etb_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&replicator_out_port1>;
+				};
+			};
+		};
+
 		intc: interrupt-controller@a0411000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
@@ -31,6 +185,20 @@
 			      <0xa0410100 0x100>;
 		};
 
+		scu@a04100000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xa0410000 0x100>;
+		};
+
+		/*
+		 * The backup RAM is used for retention during sleep
+		 * and various things like spin tables
+		 */
+		backupram@80150000 {
+			compatible = "ste,dbx500-backupram";
+			reg = <0x80150000 0x2000>;
+		};
+
 		L2: l2-cache {
 			compatible = "arm,pl310-cache";
 			reg = <0xa0412000 0x1000>;
@@ -91,6 +259,13 @@
 			clocks = <&smp_twd_clk>;
 		};
 
+		watchdog@a0410620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xa0410620 0x20>;
+			interrupts = <1 14 0x304>;
+			clocks = <&smp_twd_clk>;
+		};
+
 		rtc@80154000 {
 			compatible = "arm,rtc-pl031", "arm,primecell";
 			reg = <0x80154000 0x1000>;
diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi
index 7d4f8184c522..78b75256c638 100644
--- a/arch/arm/boot/dts/ste-href-stuib.dtsi
+++ b/arch/arm/boot/dts/ste-href-stuib.dtsi
@@ -77,6 +77,34 @@
 			};
 		};
 
+		/* Sensors mounted on this board variant */
+		i2c@80128000 {
+			lis331dl@1c {
+				/* Accelerometer */
+				compatible = "st,lis331dl-accel";
+				st,drdy-int-pin = <1>;
+				reg = <0x1c>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&accel_stuib_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
+			};
+			ak8974@0f {
+				/* Magnetometer */
+				compatible = "asahi-kasei,ak8974";
+				reg = <0x0f>;
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&magneto_stuib_mode>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <0 IRQ_TYPE_EDGE_RISING>;
+			};
+		};
+
 		i2c@80110000 {
 			bu21013_tp@5c {
 				compatible = "rohm,bu21013_tp";
@@ -116,6 +144,28 @@
 					};
 				};
 			};
+			accelerometer {
+				accel_stuib_mode: accel_stuib {
+					/* Accelerometer interrupt lines 1 & 2 */
+					stuib_cfg {
+						pins = "GPIO82_C1", "GPIO83_D3";
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
+			magnetometer {
+				magneto_stuib_mode: magneto_stuib {
+					/* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */
+					stuib_cfg1 {
+						pins = "GPIO31_V3";
+						ste,config = <&gpio_in_pu>;
+					};
+					stuib_cfg2 {
+						pins = "GPIO32_V2";
+						ste,config = <&gpio_in_pd>;
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
index 062c6aae3afa..0e1c96943d47 100644
--- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
+++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi
@@ -99,10 +99,13 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_tvk_mode>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <18 IRQ_TYPE_EDGE_RISING>,
+					     <19 IRQ_TYPE_EDGE_RISING>;
 			};
-			lsm303dlm@1e {
+			lsm303dlh@1e {
 				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
+				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index f182f6538e90..9a5f2ba139b7 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -722,8 +722,9 @@
 			   reg = <0x1a>;
 		};
 		lis3lv02dl@1d {
-			   compatible = "st,lis3lv02dl";
-			   reg = <0x1d>;
+			/* Accelerometer */
+			compatible = "st,lis3lv02dl-accel";
+			reg = <0x1d>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 1bc84ebdccaa..9edadc37719f 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -262,15 +262,19 @@
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&accel_snowball_mode>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <3 IRQ_TYPE_EDGE_RISING>, /* INT1 */
+					     <4 IRQ_TYPE_EDGE_RISING>; /* INT2 */
 			};
-			lsm303dlm@1e {
+			lsm303dlh@1e {
 				/* Magnetometer */
-				compatible = "st,lsm303dlm-magn";
+				compatible = "st,lsm303dlh-magn";
 				reg = <0x1e>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&magneto_snowball_mode>;
+				gpios = <&gpio5 5 0x4>; /* DRDY line */
 			};
 			l3g4200d@68 {
 				/* Gyroscope */
@@ -279,6 +283,11 @@
 				reg = <0x68>;
 				vdd-supply = <&ab8500_ldo_aux1_reg>;
 				vddio-supply = <&db8500_vsmps2_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&gyro_snowball_mode>;
+				gpios = <&gpio5 6 0x4>; /* DRDY line */
+				interrupt-parent = <&gpio5>;
+				interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* INT1 */
 			};
 			lsp001wm@5c {
 				/* Barometer/pressure sensor */
@@ -489,6 +498,16 @@
 					};
 				};
 			};
+			gyro {
+				gyro_snowball_mode: gyro_snowball {
+					snowball_cfg1 {
+						pins =
+						"GPIO166_A22", /* DRDY */
+						"GPIO169_D22"; /* INT */
+						ste,config = <&gpio_in_pu>;
+					};
+				};
+			};
 			magnetometer {
 				magneto_snowball_mode: magneto_snowball {
 					snowball_cfg1 {
diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts
index af487145cd89..6d93475be554 100644
--- a/arch/arm/boot/dts/stih407-b2120.dts
+++ b/arch/arm/boot/dts/stih407-b2120.dts
@@ -7,8 +7,8 @@
  * published by the Free Software Foundation.
  */
 /dts-v1/;
-#include "stihxxx-b2120.dtsi"
 #include "stih407.dtsi"
+#include "stihxxx-b2120.dtsi"
 / {
 	model = "STiH407 B2120";
 	compatible = "st,stih407-b2120", "st,stih407";
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index c06a54681912..838b812cbda1 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -7,7 +7,10 @@
  * publishhed by the Free Software Foundation.
  */
 #include "stih407-pinctrl.dtsi"
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset-controller/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -56,6 +59,12 @@
 		cache-level = <2>;
 	};
 
+	arm-pmu {
+		interrupt-parent = <&intc>;
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -63,6 +72,12 @@
 		ranges;
 		compatible = "simple-bus";
 
+		restart {
+			compatible = "st,stih407-restart";
+			st,syscfg = <&syscfg_sbc_reg>;
+			status = "okay";
+		};
+
 		powerdown: powerdown-controller {
 			compatible = "st,stih407-powerdown";
 			#reset-cells = <1>;
@@ -113,6 +128,15 @@
 			reg = <0x94b5100 0x1000>;
 		};
 
+		irq-syscfg {
+			compatible    = "st,stih407-irq-syscfg";
+			st,syscfg     = <&syscfg_core>;
+			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+					<ST_IRQ_SYSCFG_PMU_1>;
+			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+					<ST_IRQ_SYSCFG_DISABLED>;
+		};
+
 		serial@9830000 {
 			compatible = "st,asc";
 			reg = <0x9830000 0x2c>;
@@ -280,7 +304,7 @@
 			#phy-cells = <0>;
 			st,syscfg = <&syscfg_core 0x100 0xf4>;
 			resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
-				 <&picophyreset STIH407_PICOPHY0_RESET>;
+				 <&picophyreset STIH407_PICOPHY2_RESET>;
 			reset-names = "global", "port";
 		};
 
@@ -336,5 +360,210 @@
 				resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
 			};
 		};
+
+		spi@9840000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9840000 0x110>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+			pinctrl-0 = <&pinctrl_spi0_default>;
+			pinctrl-names = "default";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
+		spi@9841000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9841000 0x110>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9842000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9842000 0x110>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9843000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9843000 0x110>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9844000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9844000 0x110>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		/* SBC SSC */
+		spi@9540000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9540000 0x110>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9541000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9541000 0x110>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		spi@9542000 {
+			compatible = "st,comms-ssc4-spi";
+			reg = <0x9542000 0x110>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_sysin>;
+			clock-names = "ssc";
+
+			status = "disabled";
+		};
+
+		mmc0: sdhci@09060000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+			reg-names = "mmc", "top-mmc-delay";
+			interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mmc0>;
+			clock-names = "mmc";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+			bus-width = <8>;
+			non-removable;
+		};
+
+		mmc1: sdhci@09080000 {
+			compatible = "st,sdhci-stih407", "st,sdhci";
+			status = "disabled";
+			reg = <0x09080000 0x7ff>;
+			reg-names = "mmc";
+			interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+			interrupt-names = "mmcirq";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sd1>;
+			clock-names = "mmc";
+			clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+			resets = <&softreset STIH407_MMC1_SOFTRESET>;
+			bus-width = <4>;
+		};
+
+		/* Watchdog and Real-Time Clock */
+		lpc@8787000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8787000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+			timeout-sec = <120>;
+			st,syscfg = <&syscfg_core>;
+			st,lpc-mode = <ST_LPC_MODE_WDT>;
+		};
+
+		lpc@8788000 {
+			compatible = "st,stih407-lpc";
+			reg = <0x8788000 0x1000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+			st,lpc-mode = <ST_LPC_MODE_RTC>;
+		};
+
+		sata0: sata@9b20000 {
+			compatible = "st,ahci";
+			reg = <0x9b20000 0x1000>;
+
+			interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port0 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+				 <&softreset STIH407_SATA0_SOFTRESET>,
+				 <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			status = "disabled";
+		};
+
+		sata1: sata@9b28000 {
+			compatible = "st,ahci";
+			reg = <0x9b28000 0x1000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+			interrupt-names = "hostc";
+
+			phys = <&phy_port1 PHY_TYPE_SATA>;
+			phy-names = "ahci_phy";
+
+			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+				 <&softreset STIH407_SATA1_SOFTRESET>,
+				 <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+			reset-names = "pwr-dwn",
+				      "sw-rst",
+				      "pwr-rst";
+
+			clock-names = "ahci_clk";
+			clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+			status = "disabled";
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			compatible	= "st,stih407-dwc3";
+			reg		= <0x08f94000 0x1000>, <0x110 0x4>;
+			reg-names	= "reg-glue", "syscfg-reg";
+			st,syscfg	= <&syscfg_core>;
+			resets		= <&powerdown STIH407_USB3_POWERDOWN>,
+					  <&softreset STIH407_MIPHY2_SOFTRESET>;
+			reset-names	= "powerdown", "softreset";
+			#address-cells	= <1>;
+			#size-cells	= <1>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_usb3>;
+			ranges;
+
+			status = "disabled";
+
+			dwc3: dwc3@9900000 {
+				compatible	= "snps,dwc3";
+				reg		= <0x09900000 0x100000>;
+				interrupts	= <GIC_SPI 155 IRQ_TYPE_NONE>;
+				dr_mode		= "host";
+				phy-names	= "usb2-phy", "usb3-phy";
+				phys		= <&usb2_picophy0>,
+						  <&phy_port2 PHY_TYPE_USB3>;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi
index 402844cb3152..0a754f275212 100644
--- a/arch/arm/boot/dts/stih407-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi
@@ -104,6 +104,7 @@
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
 				st,bank-name = "PIO5";
+				st,retime-pin-mask = <0x3f>;
 			};
 
 			rc {
@@ -519,6 +520,7 @@
 				#interrupt-cells = <2>;
 				reg = <0x5000 0x100>;
 				st,bank-name = "PIO35";
+				st,retime-pin-mask = <0x7f>;
 			};
 
 			i2c4 {
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 3efa3b2ebe90..2c560fc30503 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -147,5 +147,33 @@
 				};
 			};
 		};
+
+		/* COMMS PWM Module */
+		pwm0: pwm@9810000 {
+			compatible	= "st,sti-pwm";
+			status		= "disabled";
+			#pwm-cells	= <2>;
+			reg		= <0x9810000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm0_chan0_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@9510000 {
+			compatible	= "st,sti-pwm";
+			status		= "disabled";
+			#pwm-cells	= <2>;
+			reg		= <0x9510000 0x68>;
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					&pinctrl_pwm1_chan1_default
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts
index 2f61a9960dee..16f02c5e33a4 100644
--- a/arch/arm/boot/dts/stih410-b2120.dts
+++ b/arch/arm/boot/dts/stih410-b2120.dts
@@ -26,4 +26,14 @@
 	aliases {
 		ttyAS0 = &sbc_serial0;
 	};
+
+	soc {
+
+		mmc0: sdhci@09060000 {
+			max-frequency = <200000000>;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index 961799e1dc51..f1ceee192a0e 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -51,5 +51,15 @@
 		sata0: sata@fe380000{
 			status = "okay";
 		};
+
+		/* SAS PWM Module */
+		pwm0: pwm@fed10000 {
+			status		= "okay";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@fe510000 {
+			status		= "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index 9cccf2d6aa26..051fc16f3706 100644
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -216,6 +216,29 @@
 					};
 				};
 			};
+
+			pwm1 {
+				pinctrl_pwm1_chan0_default: pwm1-0-default {
+					st,pins {
+						pwm-out    = <&pio3 0 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan1_default: pwm1-1-default {
+					st,pins {
+						pwm-out    = <&pio4 4 ALT1 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan2_default: pwm1-2-default {
+					st,pins {
+						pwm-out    = <&pio4 6 ALT3 OUT>;
+					};
+				};
+				pinctrl_pwm1_chan3_default: pwm1-3-default {
+					st,pins {
+						pwm-out    = <&pio4 7 ALT3 OUT>;
+					};
+				};
+			};
 		};
 
 		pin-controller-front {
@@ -310,6 +333,14 @@
 				st,bank-name	= "PIO31";
 			};
 
+			pwm0 {
+				pinctrl_pwm0_chan0_default: pwm0-0-default {
+					st,pins {
+						pwm-out    = <&pio9 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			serial2-oe {
 				pinctrl_serial2_oe: serial2-1 {
 					st,pins {
@@ -540,6 +571,25 @@
 					};
 				};
 			};
+
+			pwm0 {
+				pinctrl_pwm0_chan1_default: pwm0-1-default {
+					st,pins {
+						pwm-out    = <&pio13 2 ALT2 OUT>;
+					};
+				};
+				pinctrl_pwm0_chan2_default: pwm0-2-default {
+					st,pins {
+						pwm-out    = <&pio15 2 ALT4 OUT>;
+					};
+				};
+				pinctrl_pwm0_chan3_default: pwm0-3-default {
+					st,pins {
+						pwm-out    = <&pio17 4 ALT1 OUT>;
+					};
+				};
+			};
+
 		};
 
 		pin-controller-fvdp-fe {
diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index eeb7afecbbe6..9dca173e694a 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -13,6 +13,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset-controller/stih416-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
 / {
 	L2: cache-controller {
 		compatible = "arm,pl310-cache";
@@ -23,6 +24,12 @@
 		cache-level = <2>;
 	};
 
+	arm-pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -30,6 +37,12 @@
 		ranges;
 		compatible	= "simple-bus";
 
+		restart {
+			compatible = "st,stih416-restart";
+			st,syscfg = <&syscfg_sbc>;
+			status = "okay";
+		};
+
 		powerdown: powerdown-controller {
 			#reset-cells = <1>;
 			compatible = "st,stih416-powerdown";
@@ -86,6 +99,15 @@
 			reg		= <0xfe4b5100 0x8>;
 		};
 
+		irq-syscfg {
+			compatible    = "st,stih416-irq-syscfg";
+			st,syscfg     = <&syscfg_cpu>;
+			st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+					<ST_IRQ_SYSCFG_PMU_1>;
+			st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+					<ST_IRQ_SYSCFG_DISABLED>;
+		};
+
 		serial2: serial@fed32000{
 			compatible	= "st,asc";
 			status 		= "disabled";
@@ -104,7 +126,7 @@
 			interrupts	= <0 210 0>;
 			pinctrl-names 	= "default";
 			pinctrl-0 	= <&pinctrl_sbc_serial1>;
-			clocks          = <&clk_sysin>;
+			clocks		= <&clk_sysin>;
 		};
 
 		i2c@fed40000 {
@@ -445,5 +467,47 @@
 				 <&softreset STIH416_USB3_SOFTRESET>;
 			reset-names = "power", "softreset";
 		};
+
+		/* SAS PWM Module */
+		pwm0: pwm@fed10000 {
+			compatible	= "st,sti-pwm";
+			status		= "disabled";
+			#pwm-cells	= <2>;
+			reg		= <0xfed10000 0x68>;
+
+			pinctrl-names	= "default";
+			pinctrl-0 = 	<&pinctrl_pwm0_chan0_default
+					&pinctrl_pwm0_chan1_default
+					&pinctrl_pwm0_chan2_default
+					&pinctrl_pwm0_chan3_default>;
+
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <4>;
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@fe510000 {
+			compatible	= "st,sti-pwm";
+			status		= "disabled";
+			#pwm-cells	= <2>;
+			reg		= <0xfe510000 0x68>;
+
+			pinctrl-names	= "default";
+			pinctrl-0	= <&pinctrl_pwm1_chan0_default
+					/*
+					 * Shared with SBC_OBS_NOTRST.  Don't
+					 * enable unless you really know what
+					 * you're doing.
+					 *
+					 * &pinctrl_pwm1_chan1_default
+					 */
+					&pinctrl_pwm1_chan2_default
+					&pinctrl_pwm1_chan3_default>;
+
+			clock-names	= "pwm";
+			clocks		= <&clk_sysin>;
+			st,pwm-num-chan = <3>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts
index 926235c08e4d..82eee39ccb31 100644
--- a/arch/arm/boot/dts/stih418-b2199.dts
+++ b/arch/arm/boot/dts/stih418-b2199.dts
@@ -74,5 +74,32 @@
 			st,i2c-min-scl-pulse-width-us = <0>;
 			st,i2c-min-sda-pulse-width-us = <5>;
 		};
+
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
+		mmc0: sdhci@09060000 {
+			status = "okay";
+			max-frequency = <200000000>;
+			sd-uhs-sdr50;
+			sd-uhs-sdr104;
+			sd-uhs-ddr50;
+		};
+
+		miphy28lp_phy: miphy28lp@9b22000 {
+
+			phy_port0: port@9b22000 {
+				st,osc-rdy;
+			};
+
+			phy_port1: port@9b2a000 {
+				st,osc-force-ext;
+			};
+		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index c1d859092be7..f589fe487f13 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -47,6 +47,14 @@
 			status = "okay";
 		};
 
+		mmc0: sdhci@09060000 {
+			status = "okay";
+		};
+
+		mmc1: sdhci@09080000 {
+			status = "okay";
+		};
+
 		/* SSC11 to HDMI */
 		hdmiddc: i2c@9541000 {
 			status = "okay";
@@ -66,5 +74,10 @@
 				st,osc-force-ext;
 			};
 		};
+
+		st_dwc3: dwc3@8f94000 {
+			status = "okay";
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
new file mode 100644
index 000000000000..6b9aa59d978a
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429-disco.dts
@@ -0,0 +1,71 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f429.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32F429i-DISCO board";
+	compatible = "st,stm32f429i-disco", "st,stm32f429";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 root=/dev/ram rdinit=/linuxrc";
+		linux,stdout-path = &usart1;
+	};
+
+	memory {
+		reg = <0x90000000 0x800000>;
+	};
+
+	aliases {
+		serial0 = &usart1;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
new file mode 100644
index 000000000000..aa73b4f4172c
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -0,0 +1,214 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+
+/ {
+	clocks {
+		clk_sysclk: clk-sysclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <180000000>;
+		};
+
+		clk_hclk: clk-hclk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <180000000>;
+		};
+
+		clk_pclk1: clk-pclk1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <45000000>;
+		};
+
+		clk_pclk2: clk-pclk2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <90000000>;
+		};
+
+		clk_pmtr1: clk-pmtr1 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <90000000>;
+		};
+
+		clk_pmtr2: clk-pmtr2 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <180000000>;
+		};
+
+		clk_systick: clk-systick {
+			compatible = "fixed-factor-clock";
+			clocks = <&clk_hclk>;
+			#clock-cells = <0>;
+			clock-div = <8>;
+			clock-mult = <1>;
+		};
+	};
+
+	soc {
+		timer2: timer@40000000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000000 0x400>;
+			interrupts = <28>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer3: timer@40000400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000400 0x400>;
+			interrupts = <29>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer4: timer@40000800 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000800 0x400>;
+			interrupts = <30>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer5: timer@40000c00 {
+			compatible = "st,stm32-timer";
+			reg = <0x40000c00 0x400>;
+			interrupts = <50>;
+			clocks = <&clk_pmtr1>;
+		};
+
+		timer6: timer@40001000 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001000 0x400>;
+			interrupts = <54>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		timer7: timer@40001400 {
+			compatible = "st,stm32-timer";
+			reg = <0x40001400 0x400>;
+			interrupts = <55>;
+			clocks = <&clk_pmtr1>;
+			status = "disabled";
+		};
+
+		usart2: serial@40004400 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40004400 0x400>;
+			interrupts = <38>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart3: serial@40004800 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40004800 0x400>;
+			interrupts = <39>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart4: serial@40004c00 {
+			compatible = "st,stm32-uart";
+			reg = <0x40004c00 0x400>;
+			interrupts = <52>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart5: serial@40005000 {
+			compatible = "st,stm32-uart";
+			reg = <0x40005000 0x400>;
+			interrupts = <53>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart7: serial@40007800 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40007800 0x400>;
+			interrupts = <82>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart8: serial@40007c00 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40007c00 0x400>;
+			interrupts = <83>;
+			clocks = <&clk_pclk1>;
+			status = "disabled";
+		};
+
+		usart1: serial@40011000 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40011000 0x400>;
+			interrupts = <37>;
+			clocks = <&clk_pclk2>;
+			status = "disabled";
+		};
+
+		usart6: serial@40011400 {
+			compatible = "st,stm32-usart", "st,stm32-uart";
+			reg = <0x40011400 0x400>;
+			interrupts = <71>;
+			clocks = <&clk_pclk2>;
+			status = "disabled";
+		};
+	};
+};
+
+&systick {
+	clocks = <&clk_systick>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index b67e5be618cf..2630d78d9e04 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,101 +53,12 @@
 	model = "Mele A1000";
 	compatible = "mele,a1000", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			emac_power_pin_a1000: emac_power_pin@0 {
-				allwinner,pins = "PH15";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_a1000: led_pins@0 {
-				allwinner,pins = "PH10", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
+	aliases {
+		serial0 = &uart0;
+	};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -181,12 +87,111 @@
 		enable-active-high;
 		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>;
 	};
+};
+
+&ahci {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	emac_power_pin_a1000: emac_power_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	led_pins_a1000: led_pins@0 {
+		allwinner,pins = "PH10", "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
index 490b77c9bb36..93d435670ef1 100644
--- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
+++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -55,94 +50,104 @@
 	model = "BA10 tvbox";
 	compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			usb2_vbus_pin_a: usb2_vbus_pin@0 {
-				allwinner,pins = "PH12";
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
 
-	reg_usb2_vbus: usb2-vbus {
-		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
 };
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	usb2_vbus_pin_a: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
index 58214f249598..5878a0b11f7b 100644
--- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
+++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -49,10 +44,19 @@
 #include "sun4i-a10.dtsi"
 #include "sunxi-common-regulators.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Chuwi V7 CW0825";
 	compatible = "chuwi,v7-cw0825", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci1 {
@@ -74,6 +78,32 @@
 	};
 };
 
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@800 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <800000>;
+	};
+
+	button@1000 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <1000000>;
+	};
+
+	button@1200 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <1200000>;
+	};
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 4260c2b47607..9afb4e018593 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,102 +52,12 @@
 	model = "Cubietech Cubieboard";
 	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupts = <0>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		spi0: spi@01c05000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -171,26 +76,100 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+};
 
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
 };
 
-#include "axp209.dtsi"
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
+&ohci0 {
+	status = "okay";
 };
 
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard: led_pins@0 {
+		allwinner,pins = "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -215,3 +194,30 @@
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
new file mode 100644
index 000000000000..570754d8df67
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts
@@ -0,0 +1,171 @@
+/*
+ * Copyright 2015 Priit Laes
+ *
+ * Priit Laes <plaes@plaes.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Gemei G9 Tablet";
+	compatible = "gemei,g9", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * TODO:
+ *   2x cameras via CSI
+ *   bma250 IRQs
+ *   AXP battery management
+ *   NAND
+ *   OTG
+ *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
+ */
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	/* Accelerometer */
+	bma250@18 {
+		compatible = "bosch,bma250";
+		reg = <0x18>;
+
+		/*
+		 * TODO: interrupt pins:
+		 * int1 - PH00
+		 * int2 - PI10
+		 */
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+
+	status = "okay";
+
+	button@158 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <158730>;
+	};
+
+	button@349 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <349206>;
+	};
+
+	button@1142 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1142856>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
+	cd-inverted;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+
+&uart0  {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index d3f73ea25567..2b17c5199151 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,100 +53,12 @@
 	model = "Miniand Hackberry";
 	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy0>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			phy-supply = <&reg_emac_3v3>;
-			status = "okay";
-
-			phy0: ethernet-phy@0 {
-				reg = <0>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&hackberry_hogs>;
-
-			hackberry_hogs: hogs@0 {
-				allwinner,pins = "PH19";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
-					allwinner,pins = "PH12";
-					allwinner,function = "gpio_out";
-					allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-					allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	reg_emac_3v3: emac-3v3 {
@@ -162,14 +69,97 @@
 		enable-active-high;
 		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy0>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-0 = <&usb2_vbus_pin_hackberry>;
-		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hackberry_hogs>;
+
+	hackberry_hogs: hogs@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb2_vbus_pin_hackberry: usb2_vbus_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
index c88382aacc36..43f58fbe161c 100644
--- a/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,6 +48,14 @@
 / {
 	model = "Hyundai A7HD";
 	compatible = "hyundai,a7hd", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci1 {
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 482914333bba..6c927a824ba2 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -61,66 +56,68 @@
 		serial0 = &uart0;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
 };
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
new file mode 100644
index 000000000000..dc2f2aeaff07
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2015 Gábor Nyers
+ *
+ * Gábor Nyers <gabor.nyers@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun4i-a10.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Jesurun Q5";
+	compatible = "jesurun,q5", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_q5>;
+
+		green {
+			label = "q5:green:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
+		};
+
+	};
+
+	reg_emac_3v3: emac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&emac_power_pin_q5>;
+		regulator-name = "emac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mdio {
+	phy-supply = <&reg_emac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	emac_power_pin_q5: emac_power_pin@0 {
+		allwinner,pins = "PH19";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_q5: led_pins@0 {
+		allwinner,pins = "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 9ee86a700c2b..02158bcd64ee 100644
--- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,6 +52,14 @@
 	model = "HAOYU Electronics Marsboard A10";
 	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -96,6 +99,10 @@
 	status = "okay";
 };
 
+&emac_sram {
+	status = "okay";
+};
+
 &emac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&emac_pins_a>;
@@ -166,7 +173,8 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index eb5fd6904a69..ebe2a04ef649 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,79 +53,83 @@
 	model = "PineRiver Mini X-Plus";
 	compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ir0_pins_a: ir0@0 {
-				/* The ir receiver is not always populated */
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
 	};
 };
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&ir0_rx_pins_a {
+	/* The ir receiver is not always populated */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802.dts b/arch/arm/boot/dts/sun4i-a10-mk802.dts
index e9a6886f0d51..3c7eebe17088 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,6 +48,14 @@
 / {
 	model = "MK802";
 	compatible = "allwinner,mk802", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
index 802eda494d1c..c861fa7e356c 100644
--- a/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mk802ii.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,6 +48,14 @@
 / {
 	model = "MK802ii";
 	compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci0 {
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 75742f8f96f3..b64aa4eb071e 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,136 +51,143 @@
 	model = "Olimex A10-OLinuXino-LIME";
 	compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
-	cpus {
-		cpu0: cpu@0 {
-			/*
-			 * The A10-Lime is known to be unstable
-			 * when running at 1008 MHz
-			 */
-			operating-points = <
-				/* kHz    uV */
-				912000  1350000
-				864000  1300000
-				624000  1250000
-				>;
-			cooling-max-level = <2>;
-		};
+	aliases {
+		serial0 = &uart0;
 	};
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
+		green {
+			label = "a10-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
+	};
+};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+&cpu0 {
+	/*
+	 * The A10-Lime is known to be unstable when running at 1008 MHz
+	 */
+	operating-points = <
+		/* kHz    uV */
+		912000  1350000
+		864000  1300000
+		624000  1250000
+		>;
+	cooling-max-level = <2>;
+};
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+&emac_sram {
+	status = "okay";
+};
 
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
+&mdio {
+	status = "okay";
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinolime>;
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-		green {
-			label = "a10-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
+&ohci0 {
+	status = "okay";
+};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&ohci1 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 9d1e5482cf82..4e3e1b9d8217 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,90 +53,12 @@
 	model = "LinkSprite pcDuino";
 	compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_pcduino: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			key_pins_pcduino: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		mdio@01c0b080 {
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
+	aliases {
+		serial0 = &uart0;
+	};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -185,12 +102,100 @@
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
+
+&emac_sram {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_pcduino: led_pins@0 {
+		allwinner,pins = "PH15", "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	key_pins_pcduino: key_pins@0 {
+		allwinner,pins = "PH17", "PH18", "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index eebb7853e00b..61c03d1fe530 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -2,12 +2,43 @@
  * Copyright 2012 Stefan Roese
  * Stefan Roese <sr@denx.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
@@ -30,7 +61,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>;
@@ -38,7 +70,8 @@
 		};
 
 		framebuffer@1 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>, <&ahb_gates 46>;
@@ -74,11 +107,11 @@
 			clocks = <&cpu>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
-				/* kHz    uV */
+				/* kHz	  uV */
 				1008000 1400000
-				912000  1350000
-				864000  1300000
-				624000  1250000
+				912000	1350000
+				864000	1300000
+				624000	1250000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
@@ -398,11 +431,12 @@
 
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
-		        #reset-cells = <1>;
+			#reset-cells = <1>;
 			compatible = "allwinner,sun4i-a10-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+			clock-output-names = "usb_ohci0", "usb_ohci1",
+					     "usb_phy";
 		};
 
 		spi3_clk: clk@01c200d4 {
@@ -420,6 +454,42 @@
 		#size-cells = <1>;
 		ranges;
 
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@00000000 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@00010000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0000 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
 		dma: dma-controller@01c02000 {
 			compatible = "allwinner,sun4i-a10-dma";
 			reg = <0x01c02000 0x1000>;
@@ -461,6 +531,7 @@
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
 			clocks = <&ahb_gates 17>;
+			allwinner,sram = <&emac_sram 1>;
 			status = "disabled";
 		};
 
@@ -485,6 +556,8 @@
 				      "sample";
 			interrupts = <32>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -500,6 +573,8 @@
 				      "sample";
 			interrupts = <33>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -515,6 +590,8 @@
 				      "sample";
 			interrupts = <34>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -530,6 +607,8 @@
 				      "sample";
 			interrupts = <35>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c13400 {
@@ -706,7 +785,8 @@
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -719,43 +799,85 @@
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
-			ir0_pins_a: ir0@0 {
-				allwinner,pins = "PB3","PB4";
+			ir0_rx_pins_a: ir0@0 {
+				allwinner,pins = "PB4";
 				allwinner,function = "ir0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_pins_a: ir1@0 {
-				allwinner,pins = "PB22","PB23";
+			ir0_tx_pins_a: ir0@1 {
+				allwinner,pins = "PB3";
+				allwinner,function = "ir0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_rx_pins_a: ir1@0 {
+				allwinner,pins = "PB23";
+				allwinner,function = "ir1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_tx_pins_a: ir1@1 {
+				allwinner,pins = "PB22";
 				allwinner,function = "ir1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi0_pins_a: spi0@0 {
-				allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+				allwinner,pins = "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_cs0_pins_a: spi0_cs0@0 {
+				allwinner,pins = "PI10";
 				allwinner,function = "spi0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi1_pins_a: spi1@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,pins = "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_cs0_pins_a: spi1_cs0@0 {
+				allwinner,pins = "PI16";
 				allwinner,function = "spi1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_a: spi2@0 {
-				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,pins = "PC20", "PC21", "PC22";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_b: spi2@1 {
-				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,pins = "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_a: spi2_cs0@0 {
+				allwinner,pins = "PC19";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_b: spi2_cs0@1 {
+				allwinner,pins = "PB14";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
new file mode 100644
index 000000000000..2b3511ea2e5d
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t004.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a10s.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Auxtek t004 A10s hdmi tv-stick";
+	compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_t004>;
+
+		red {
+			label = "t004-tv-dongle:red:usr";
+			gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
+			default-state = "on";
+		};
+	};
+
+	reg_vmmc1: vmmc1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mmc1_vcc_en_pin_t004>;
+		regulator-name = "vmmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vmmc1>;
+	bus-width = <4>;
+	non-removable;
+	cap-sdio-irq;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_t004: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 {
+		allwinner,pins = "PB18";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_t004: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usb1_vbus_pin_a {
+	allwinner,pins = "PG13";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a10s-mk802.dts b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
index b21af87d9eae..46ff9407826d 100644
--- a/arch/arm/boot/dts/sun5i-a10s-mk802.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-mk802.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -54,6 +49,14 @@
 	model = "MK802-A10s";
 	compatible = "allwinner,a10s-mk802", "allwinner,sun5i-a10s";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 2bbc93b935ca..a7e19e4847f7 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -65,184 +60,191 @@
 		serial2 = &uart3;
 	};
 
-	soc@01c00000 {
-		emac: ethernet@01c0b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&emac_pins_a>;
-			phy = <&phy1>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		mdio@01c0b080 {
-			status = "okay";
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
+		green {
+			label = "a10s-olinuxino-micro:green:usr";
+			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
+	};
+};
 
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-			cd-inverted;
-			status = "okay";
-		};
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_pins_a>;
+	phy = <&phy1>;
+	status = "okay";
+};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
+&emac_sram {
+	status = "okay";
+};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
 
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PE3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
-				allwinner,pins = "PB10";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+	at24@50 {
+		compatible = "at,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+		read-only;
+	};
+};
 
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@191 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <191274>;
-			};
-
-			button@392 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <392644>;
-			};
-
-			button@601 {
-				label = "Menu";
-				linux,code = <KEY_MENU>;
-				channel = <0>;
-				voltage = <601151>;
-			};
-
-			button@795 {
-				label = "Enter";
-				linux,code = <KEY_ENTER>;
-				channel = <0>;
-				voltage = <795090>;
-			};
-
-			button@987 {
-				label = "Home";
-				linux,code = <KEY_HOMEPAGE>;
-				channel = <0>;
-				voltage = <987387>;
-			};
-		};
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
 
-		uart2: serial@01c28800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_pins_a>;
-			status = "okay";
-		};
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
 
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_a>;
-			status = "okay";
-		};
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
 
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-
-			at24@50 {
-				compatible = "at,24c16";
-				pagesize = <16>;
-				reg = <0x50>;
-				read-only;
-			};
-		};
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
 
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
+&mdio {
+	status = "okay";
 
-		green {
-			label = "a10s-olinuxino-micro:green:usr";
-			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
-		gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&pio {
+	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PE3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+		allwinner,pins = "PB10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 };
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index 7deddfc9df8b..3b057983c74a 100644
--- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,67 +51,12 @@
 	model = "R7 A10s hdmi tv-stick";
 	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc1: mmc@01c10000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc1_pins_a>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-				allwinner,pins = "PG1";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_r7: led_pins@0 {
-				allwinner,pins = "PB2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-				allwinner,pins = "PG13";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -130,10 +70,71 @@
 			default-state = "on";
 		};
 	};
+};
+
+&ehci0 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_r7>;
-		gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+		allwinner,pins = "PG1";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_r7: led_pins@0 {
+		allwinner,pins = "PB2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+
+	usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+		allwinner,pins = "PG13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_r7>;
+	gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 2fd8988f310c..f11efb722bbb 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -3,16 +3,49 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
 
+#include "sun5i.dtsi"
+
 #include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -29,7 +62,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>;
@@ -45,133 +79,23 @@
 		};
 	};
 
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a8";
-		};
-	};
-
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
 		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
-				"ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
-				"ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
-				"ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_emac", "ahb_ts",
+					     "ahb_spi0", "ahb_spi1", "ahb_spi2",
+					     "ahb_gps", "ahb_stimer", "ahb_ve",
+					     "ahb_tve", "ahb_lcd", "ahb_csi",
+					     "ahb_hdmi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
 		};
 
 		apb0_gates: clk@01c20068 {
@@ -179,16 +103,9 @@
 			compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
-				"apb0_ir", "apb0_keypad";
-		};
-
-		apb1: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1";
+			clock-output-names = "apb0_codec", "apb0_iis",
+					     "apb0_pio", "apb0_ir",
+					     "apb0_keypad";
 		};
 
 		apb1_gates: clk@01c2006c {
@@ -200,166 +117,15 @@
 				"apb1_i2c2", "apb1_uart0", "apb1_uart1",
 				"apb1_uart2", "apb1_uart3";
 		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun5i-a13-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
 	};
 
 	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun4i-a10-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <27>;
-			clocks = <&ahb_gates 6>;
-			#dma-cells = <2>;
-		};
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
-			       <&dma SUN4I_DMA_DEDICATED 26>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
-			       <&dma SUN4I_DMA_DEDICATED 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-a10-emac";
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <55>;
 			clocks = <&ahb_gates 17>;
+			allwinner,sram = <&emac_sram 1>;
 			status = "disabled";
 		};
 
@@ -371,214 +137,6 @@
 			#size-cells = <0>;
 		};
 
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <33>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 0>, <&usb_clk 1>;
-			reset-names = "usb0_reset", "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a10s-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a10s-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
-			       <&dma SUN4I_DMA_DEDICATED 28>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a10s-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PB19", "PB20";
-				allwinner,function = "uart0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart2_pins_a: uart2@0 {
-				allwinner,pins = "PC18", "PC19";
-				allwinner,function = "uart2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart3_pins_a: uart3@0 {
-				allwinner,pins = "PG9", "PG10";
-				allwinner,function = "uart3";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			emac_pins_a: emac0@0 {
-				allwinner,pins = "PA0", "PA1", "PA2",
-						"PA3", "PA4", "PA5", "PA6",
-						"PA7", "PA8", "PA9", "PA10",
-						"PA11", "PA12", "PA13", "PA14",
-						"PA15", "PA16";
-				allwinner,function = "emac";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
-				allwinner,function = "mmc1";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		lradc: lradc@01c22800 {
-			compatible = "allwinner,sun4i-a10-lradc-keys";
-			reg = <0x01c22800 0x100>;
-			interrupts = <31>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-			#thermal-sensor-cells = <0>;
-		};
-
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
@@ -589,16 +147,6 @@
 			status = "disabled";
 		};
 
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
@@ -608,52 +156,57 @@
 			clocks = <&apb1_gates 18>;
 			status = "disabled";
 		};
+	};
+};
 
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
+&pio {
+	compatible = "allwinner,sun5i-a10s-pinctrl";
 
-		i2c0: i2c@01c2ac00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			status = "disabled";
-		};
+	uart0_pins_a: uart0@0 {
+		allwinner,pins = "PB19", "PB20";
+		allwinner,function = "uart0";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		i2c1: i2c@01c2b000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			status = "disabled";
-		};
+	uart2_pins_a: uart2@0 {
+		allwinner,pins = "PC18", "PC19";
+		allwinner,function = "uart2";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		i2c2: i2c@01c2b400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "allwinner,sun5i-a10s-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			status = "disabled";
-		};
+	uart3_pins_a: uart3@0 {
+		allwinner,pins = "PG9", "PG10";
+		allwinner,function = "uart3";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
+	emac_pins_a: emac0@0 {
+		allwinner,pins = "PA0", "PA1", "PA2",
+				"PA3", "PA4", "PA5", "PA6",
+				"PA7", "PA8", "PA9", "PA10",
+				"PA11", "PA12", "PA13", "PA14",
+				"PA15", "PA16";
+		allwinner,function = "emac";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc1_pins_a: mmc1@0 {
+		allwinner,pins = "PG3", "PG4", "PG5",
+				 "PG6", "PG7", "PG8";
+		allwinner,function = "mmc1";
+		allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&sram_a {
+	emac_sram: sram-section@8000 {
+		compatible = "allwinner,sun4i-a10-sram-a3-a4";
+		reg = <0x8000 0x4000>;
+		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
index 03aa04555630..990f9d61ae4d 100644
--- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
+++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -60,81 +55,72 @@
 		serial0 = &uart1;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_ldo3>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_h702: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupts = <0>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-
-			pcf8563: rtc@51 {
-				compatible = "nxp,pcf8563";
-				reg = <0x51>;
-			};
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 };
 
-#include "axp209.dtsi"
-
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_h702: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -165,3 +151,14 @@
 	regulator-max-microvolt = <3300000>;
 	regulator-name = "vcc-wifi";
 };
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
index 03deb84268ce..ad84fe4276c9 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -61,76 +56,8 @@
 		serial0 = &uart1;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxinom: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -144,10 +71,80 @@
 			default-state = "on";
 		};
 	};
+};
+
+&ehci0 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
-		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	led_pins_olinuxinom: led_pins@0 {
+		allwinner,pins = "PG9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 6b24876ed462..42324005eb7c 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -63,141 +58,143 @@
 		serial0 = &uart1;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
-			cd-inverted;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
 
-		ehci0: usb@01c14000 {
-			status = "okay";
+		power {
+			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
+	};
+};
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		pinctrl@01c20800 {
-			mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
-				allwinner,pins = "PG0";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PG9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
-				allwinner,pins = "PG11";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@191 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <191274>;
-			};
-
-			button@392 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <392644>;
-			};
-
-			button@601 {
-				label = "Menu";
-				linux,code = <KEY_MENU>;
-				channel = <0>;
-				voltage = <601151>;
-			};
-
-			button@795 {
-				label = "Enter";
-				linux,code = <KEY_ENTER>;
-				channel = <0>;
-				voltage = <795090>;
-			};
-
-			button@987 {
-				label = "Home";
-				linux,code = <KEY_HOMEPAGE>;
-				channel = <0>;
-				voltage = <987387>;
-			};
-		};
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupts = <0>;
 
-		uart1: serial@01c28400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart1_pins_b>;
-			status = "okay";
-		};
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupts = <0>;
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
 
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
 
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
 
-		power {
-			gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
+	button@795 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <795090>;
+	};
+
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PG9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
-		gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
+		allwinner,pins = "PG11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
+	gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_b>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
new file mode 100644
index 000000000000..514f159a14d4
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i-a13-utoo-p66.dts
@@ -0,0 +1,226 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun5i-a13.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Utoo P66";
+	compatible = "utoo,p66", "allwinner,sun5i-a13";
+
+	i2c_lcd: i2c@0 {
+		/* The lcd panel i2c interface is hooked up via gpios */
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_lcd_pins>;
+		gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>, /* PG12, sda */
+			<&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10, scl */
+		i2c-gpio,delay-us = <5>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupts = <0>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+
+	icn8318: touchscreen@40 {
+		compatible = "chipone,icn8318";
+		reg = <0x40>;
+		interrupt-parent = <&pio>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_wake_pin_p66>;
+		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-swapped-x-y;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_ldo2>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_p66>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
+
+&pio {
+	mmc0_cd_pin_p66: mmc0_cd_pin@0 {
+		allwinner,pins = "PG0";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	i2c_lcd_pins: i2c_lcd_pin@0 {
+		allwinner,pins = "PG10", "PG12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	ts_wake_pin_p66: ts_wake_pin@0 {
+		allwinner,pins = "PB3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&reg_usb0_vbus {
+	gpio = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_ldo3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 883cb4873688..976d4faa2179 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -3,20 +3,51 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "skeleton.dtsi"
 
-#include <dt-bindings/thermal/thermal.h>
+#include "sun5i.dtsi"
 
-#include <dt-bindings/dma/sun4i-a10.h>
 #include <dt-bindings/pinctrl/sun4i-a10.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -35,31 +66,6 @@
 		};
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a8";
-			reg = <0x0>;
-			clocks = <&cpu>;
-			clock-latency = <244144>; /* 8 32k periods */
-			operating-points = <
-				/* kHz    uV */
-				1008000 1400000
-				912000  1350000
-				864000  1300000
-				624000  1200000
-				576000  1200000
-				432000  1200000
-				>;
-			#cooling-cells = <2>;
-			cooling-min-level = <0>;
-			cooling-max-level = <5>;
-		};
-	};
-
 	thermal-zones {
 		cpu_thermal {
 			/* milliseconds */
@@ -92,126 +98,22 @@
 		};
 	};
 
-	memory {
-		reg = <0x40000000 0x20000000>;
-	};
-
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * This is a dummy clock, to be used as placeholder on
-		 * other mux clocks when a specific parent clock is not
-		 * yet implemented. It should be dropped when the driver
-		 * is complete.
-		 */
-		dummy: dummy {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		osc24M: clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-osc-clk";
-			reg = <0x01c20050 0x4>;
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: clk@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		pll4: clk@01c20018 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-pll1-clk";
-			reg = <0x01c20018 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll4";
-		};
-
-		pll5: clk@01c20020 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll5-clk";
-			reg = <0x01c20020 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll5_ddr", "pll5_other";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
-		};
-
-		/* dummy is 200M */
-		cpu: cpu@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-axi-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		axi_gates: clk@01c2005c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-axi-gates-clk";
-			reg = <0x01c2005c 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "axi_dram";
-		};
-
-		ahb: ahb@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
-			clock-output-names = "ahb";
-		};
-
 		ahb_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun5i-a13-ahb-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb>;
-			clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
-				"ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
-				"ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
-				"ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_stimer",
-				"ahb_ve", "ahb_lcd", "ahb_csi", "ahb_de_be",
-				"ahb_de_fe", "ahb_iep", "ahb_mali400";
-		};
-
-		apb0: apb0@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb>;
-			clock-output-names = "apb0";
+			clock-output-names = "ahb_usbotg", "ahb_ehci",
+					     "ahb_ohci", "ahb_ss", "ahb_dma",
+					     "ahb_bist", "ahb_mmc0", "ahb_mmc1",
+					     "ahb_mmc2", "ahb_nand",
+					     "ahb_sdram", "ahb_spi0",
+					     "ahb_spi1", "ahb_spi2",
+					     "ahb_stimer", "ahb_ve", "ahb_lcd",
+					     "ahb_csi", "ahb_de_be",
+					     "ahb_de_fe", "ahb_iep",
+					     "ahb_mali400";
 		};
 
 		apb0_gates: clk@01c20068 {
@@ -219,15 +121,8 @@
 			compatible = "allwinner,sun5i-a13-apb0-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb0>;
-			clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir";
-		};
-
-		apb1: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
-			clock-output-names = "apb1";
+			clock-output-names = "apb0_codec", "apb0_pio",
+					     "apb0_ir";
 		};
 
 		apb1_gates: clk@01c2006c {
@@ -238,384 +133,39 @@
 			clock-output-names = "apb1_i2c0", "apb1_i2c1",
 				"apb1_i2c2", "apb1_uart1", "apb1_uart3";
 		};
-
-		nand_clk: clk@01c20080 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20080 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "nand";
-		};
-
-		ms_clk: clk@01c20084 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20084 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ms";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
-		ts_clk: clk@01c20098 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c20098 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ts";
-		};
-
-		ss_clk: clk@01c2009c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c2009c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ss";
-		};
-
-		spi0_clk: clk@01c200a0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi0";
-		};
-
-		spi1_clk: clk@01c200a4 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a4 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi1";
-		};
-
-		spi2_clk: clk@01c200a8 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200a8 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "spi2";
-		};
-
-		ir0_clk: clk@01c200b0 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-mod0-clk";
-			reg = <0x01c200b0 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "ir0";
-		};
-
-		usb_clk: clk@01c200cc {
-			#clock-cells = <1>;
-		        #reset-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-clk";
-			reg = <0x01c200cc 0x4>;
-			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_phy";
-		};
-
-		mbus_clk: clk@01c2015c {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun5i-a13-mbus-clk";
-			reg = <0x01c2015c 0x4>;
-			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
-			clock-output-names = "mbus";
-		};
 	};
+};
 
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun4i-a10-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <27>;
-			clocks = <&ahb_gates 6>;
-			#dma-cells = <2>;
-		};
-
-		spi0: spi@01c05000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c05000 0x1000>;
-			interrupts = <10>;
-			clocks = <&ahb_gates 20>, <&spi0_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
-			       <&dma SUN4I_DMA_DEDICATED 26>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		spi1: spi@01c06000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c06000 0x1000>;
-			interrupts = <11>;
-			clocks = <&ahb_gates 21>, <&spi1_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
-			       <&dma SUN4I_DMA_DEDICATED 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <32>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			interrupts = <34>;
-			status = "disabled";
-		};
-
-		usbphy: phy@01c13400 {
-			#phy-cells = <1>;
-			compatible = "allwinner,sun5i-a13-usb-phy";
-			reg = <0x01c13400 0x10 0x01c14800 0x4>;
-			reg-names = "phy_ctrl", "pmu1";
-			clocks = <&usb_clk 8>;
-			clock-names = "usb_phy";
-			resets = <&usb_clk 0>, <&usb_clk 1>;
-			reset-names = "usb0_reset", "usb1_reset";
-			status = "disabled";
-		};
-
-		ehci0: usb@01c14000 {
-			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
-			reg = <0x01c14000 0x100>;
-			interrupts = <39>;
-			clocks = <&ahb_gates 1>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		ohci0: usb@01c14400 {
-			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
-			reg = <0x01c14400 0x100>;
-			interrupts = <40>;
-			clocks = <&usb_clk 6>, <&ahb_gates 2>;
-			phys = <&usbphy 1>;
-			phy-names = "usb";
-			status = "disabled";
-		};
-
-		spi2: spi@01c17000 {
-			compatible = "allwinner,sun4i-a10-spi";
-			reg = <0x01c17000 0x1000>;
-			interrupts = <12>;
-			clocks = <&ahb_gates 22>, <&spi2_clk>;
-			clock-names = "ahb", "mod";
-			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
-			       <&dma SUN4I_DMA_DEDICATED 28>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		intc: interrupt-controller@01c20400 {
-			compatible = "allwinner,sun4i-a10-ic";
-			reg = <0x01c20400 0x400>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun5i-a13-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <28>;
-			clocks = <&apb0_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart1_pins_a: uart1@0 {
-				allwinner,pins = "PE10", "PE11";
-				allwinner,function = "uart1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			uart1_pins_b: uart1@1 {
-				allwinner,pins = "PG3", "PG4";
-				allwinner,function = "uart1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PB0", "PB1";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PB15", "PB16";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PB17", "PB18";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0x90>;
-			interrupts = <22>;
-			clocks = <&osc24M>;
-		};
-
-		wdt: watchdog@01c20c90 {
-			compatible = "allwinner,sun4i-a10-wdt";
-			reg = <0x01c20c90 0x10>;
-		};
-
-		lradc: lradc@01c22800 {
-			compatible = "allwinner,sun4i-a10-lradc-keys";
-			reg = <0x01c22800 0x100>;
-			interrupts = <31>;
-			status = "disabled";
-		};
-
-		sid: eeprom@01c23800 {
-			compatible = "allwinner,sun4i-a10-sid";
-			reg = <0x01c23800 0x10>;
-		};
-
-		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
-			reg = <0x01c25000 0x100>;
-			interrupts = <29>;
-			#thermal-sensor-cells = <0>;
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <2>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 17>;
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <4>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb1_gates 19>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <7>;
-			clocks = <&apb1_gates 0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
+&cpu0 {
+	clock-latency = <244144>; /* 8 32k periods */
+	operating-points = <
+		/* kHz	  uV */
+		1008000 1400000
+		912000	1350000
+		864000	1300000
+		624000	1200000
+		576000	1200000
+		432000	1200000
+		>;
+	#cooling-cells = <2>;
+	cooling-min-level = <0>;
+	cooling-max-level = <5>;
+};
 
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <8>;
-			clocks = <&apb1_gates 1>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
+&pio {
+	compatible = "allwinner,sun5i-a13-pinctrl";
 
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun5i-a13-i2c", "allwinner,sun4i-a10-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <9>;
-			clocks = <&apb1_gates 2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
+	uart1_pins_a: uart1@0 {
+		allwinner,pins = "PE10", "PE11";
+		allwinner,function = "uart1";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 
-		timer@01c60000 {
-			compatible = "allwinner,sun5i-a13-hstimer";
-			reg = <0x01c60000 0x1000>;
-			interrupts = <82>, <83>;
-			clocks = <&ahb_gates 28>;
-		};
+	uart1_pins_b: uart1@1 {
+		allwinner,pins = "PG3", "PG4";
+		allwinner,function = "uart1";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
new file mode 100644
index 000000000000..54b097830434
--- /dev/null
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -0,0 +1,609 @@
+/*
+ * Copyright 2012-2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/dma/sun4i-a10.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+			clocks = <&cpu>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * This is a dummy clock, to be used as placeholder on
+		 * other mux clocks when a specific parent clock is not
+		 * yet implemented. It should be dropped when the driver
+		 * is complete.
+		 */
+		dummy: dummy {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc24M: clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-osc-clk";
+			reg = <0x01c20050 0x4>;
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: clk@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		pll4: clk@01c20018 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-pll1-clk";
+			reg = <0x01c20018 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll4";
+		};
+
+		pll5: clk@01c20020 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll5-clk";
+			reg = <0x01c20020 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll5_ddr", "pll5_other";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+		};
+
+		/* dummy is 200M */
+		cpu: cpu@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-axi-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb: ahb@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-ahb-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&axi>, <&cpu>, <&pll6 1>;
+			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 1>;
+		};
+
+		apb0: apb0@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb>;
+			clock-output-names = "apb0";
+		};
+
+		apb1: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+			clock-output-names = "apb1";
+		};
+
+		axi_gates: clk@01c2005c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-axi-gates-clk";
+			reg = <0x01c2005c 0x4>;
+			clocks = <&axi>;
+			clock-output-names = "axi_dram";
+		};
+
+		nand_clk: clk@01c20080 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20080 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "nand";
+		};
+
+		ms_clk: clk@01c20084 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20084 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ms";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		ts_clk: clk@01c20098 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c20098 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ts";
+		};
+
+		ss_clk: clk@01c2009c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c2009c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ss";
+		};
+
+		spi0_clk: clk@01c200a0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi0";
+		};
+
+		spi1_clk: clk@01c200a4 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a4 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi1";
+		};
+
+		spi2_clk: clk@01c200a8 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200a8 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "spi2";
+		};
+
+		ir0_clk: clk@01c200b0 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-mod0-clk";
+			reg = <0x01c200b0 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "ir0";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&pll6 1>;
+			clock-output-names = "usb_ohci0", "usb_phy";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun5i-a13-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+			clock-output-names = "mbus";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@00000000 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+			};
+
+			sram_d: sram@00010000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0000 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun4i-a10-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <27>;
+			clocks = <&ahb_gates 6>;
+			#dma-cells = <2>;
+		};
+
+		spi0: spi@01c05000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c05000 0x1000>;
+			interrupts = <10>;
+			clocks = <&ahb_gates 20>, <&spi0_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+			       <&dma SUN4I_DMA_DEDICATED 26>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@01c06000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c06000 0x1000>;
+			interrupts = <11>;
+			clocks = <&ahb_gates 21>, <&spi1_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+			       <&dma SUN4I_DMA_DEDICATED 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <32>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <33>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			interrupts = <34>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		usbphy: phy@01c13400 {
+			#phy-cells = <1>;
+			compatible = "allwinner,sun5i-a13-usb-phy";
+			reg = <0x01c13400 0x10 0x01c14800 0x4>;
+			reg-names = "phy_ctrl", "pmu1";
+			clocks = <&usb_clk 8>;
+			clock-names = "usb_phy";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names = "usb0_reset", "usb1_reset";
+			status = "disabled";
+		};
+
+		ehci0: usb@01c14000 {
+			compatible = "allwinner,sun5i-a13-ehci", "generic-ehci";
+			reg = <0x01c14000 0x100>;
+			interrupts = <39>;
+			clocks = <&ahb_gates 1>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@01c14400 {
+			compatible = "allwinner,sun5i-a13-ohci", "generic-ohci";
+			reg = <0x01c14400 0x100>;
+			interrupts = <40>;
+			clocks = <&usb_clk 6>, <&ahb_gates 2>;
+			phys = <&usbphy 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		spi2: spi@01c17000 {
+			compatible = "allwinner,sun4i-a10-spi";
+			reg = <0x01c17000 0x1000>;
+			interrupts = <12>;
+			clocks = <&ahb_gates 22>, <&spi2_clk>;
+			clock-names = "ahb", "mod";
+			dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+			       <&dma SUN4I_DMA_DEDICATED 28>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		intc: interrupt-controller@01c20400 {
+			compatible = "allwinner,sun4i-a10-ic";
+			reg = <0x01c20400 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		pio: pinctrl@01c20800 {
+			reg = <0x01c20800 0x400>;
+			interrupts = <28>;
+			clocks = <&apb0_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PB0", "PB1";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PB15", "PB16";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PB17", "PB18";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_pins_a: mmc2@0 {
+				allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+					"PC10", "PC11", "PC12", "PC13",
+					"PC14", "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+			};
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0x90>;
+			interrupts = <22>;
+			clocks = <&osc24M>;
+		};
+
+		wdt: watchdog@01c20c90 {
+			compatible = "allwinner,sun4i-a10-wdt";
+			reg = <0x01c20c90 0x10>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <31>;
+			status = "disabled";
+		};
+
+		sid: eeprom@01c23800 {
+			compatible = "allwinner,sun4i-a10-sid";
+			reg = <0x01c23800 0x10>;
+		};
+
+		rtp: rtp@01c25000 {
+			compatible = "allwinner,sun5i-a13-ts";
+			reg = <0x01c25000 0x100>;
+			interrupts = <29>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <2>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 17>;
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <4>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb1_gates 19>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <7>;
+			clocks = <&apb1_gates 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <8>;
+			clocks = <&apb1_gates 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun4i-a10-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <9>;
+			clocks = <&apb1_gates 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		timer@01c60000 {
+			compatible = "allwinner,sun5i-a13-hstimer";
+			reg = <0x01c60000 0x1000>;
+			interrupts = <82>, <83>;
+			clocks = <&ahb_gates 28>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
index be9f5ee6b59e..2f8cfab771e2 100644
--- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
+++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,39 +53,41 @@
 	model = "Allwinner A31 APP4 EVB1 Evaluation Board";
 	compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	soc@01c00000 {
-		pio: pinctrl@01c20800 {
-			usb1_vbus_pin_a: usb1_vbus_pin@0 {
-				allwinner,pins = "PH27";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
+&pio {
+	usb1_vbus_pin_a: usb1_vbus_pin@0 {
+		allwinner,pins = "PH27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
 
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a>;
+	gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-	};
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a>;
-		gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
index 84630e56acd7..0cf9926d1e93 100644
--- a/arch/arm/boot/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,79 +53,81 @@
 	model = "WITS A31 Colombus Evaluation Board";
 	compatible = "wits,colombus", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "fail";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+	cd-inverted;
+	status = "okay";
+};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c19400 {
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1b000 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
-				allwinner,pins = "PA8";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "fail";
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+&mmc0_pins_a {
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+	mmc0_cd_pin_colombus: mmc0_cd_pin@0 {
+		allwinner,pins = "PA8";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb2_vbus_pin_colombus>;
-		gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	usb2_vbus_pin_colombus: usb2_vbus_pin@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb2_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_vbus_pin_colombus>;
+	gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
index 8b61b1b342e0..d0cfadac0691 100644
--- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
+++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,8 +53,17 @@
 	model = "Merrii A31 Hummingbird";
 	compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */
 	};
 };
 
@@ -106,10 +110,16 @@
 	};
 };
 
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>;
-	vmmc-supply = <&reg_vcc3v0>;
+	vmmc-supply = <&vcc_3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
 	cd-inverted;
@@ -121,6 +131,16 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>;
+	vmmc-supply = <&vcc_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
 &ohci0 {
 	status = "okay";
 };
@@ -132,6 +152,80 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	wifi_reset_pin_hummingbird: wifi_reset_pin@0 {
+		allwinner,pins = "PG10";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&p2wi {
+	status = "okay";
+
+	axp221: pmic@68 {
+		compatible = "x-powers,axp221";
+		reg = <0x68>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		dcdc1-supply = <&vcc_3v0>;
+		dcdc5-supply = <&vcc_dram>;
+
+		regulators {
+			x-powers,dcdc-freq = <3000>;
+
+			vcc_3v0: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "vcc-3v0";
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			vdd_gpu: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1320000>;
+				regulator-name = "vdd-gpu";
+			};
+
+			vdd_sys_dll: dcdc4 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-sys-dll";
+			};
+
+			vcc_dram: dcdc5 {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vcc-dram";
+			};
+
+			vcc_wifi: aldo1 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_wifi";
+			};
+
+			avcc: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "avcc";
+			};
+		};
+	};
 };
 
 &reg_usb1_vbus {
diff --git a/arch/arm/boot/dts/sun6i-a31-i7.dts b/arch/arm/boot/dts/sun6i-a31-i7.dts
new file mode 100644
index 000000000000..e9185dad67ee
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-i7.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2015 Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele I7 Quad top set box";
+	compatible = "mele,i7", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_i7>;
+
+		blue {
+			label = "i7:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_i7: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_i7: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_i7: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_i7>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts
index 139a21e6b695..6e0e5687a09c 100644
--- a/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,100 +48,102 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-	model = "Mele M9 / A1000G Quad top set box";
+	model = "Mele M9 top set box";
 	compatible = "mele,m9", "allwinner,sun6i-a31";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-			cd-inverted;
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m9>;
 
-		usbphy: phy@01c19400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
+		blue {
+			label = "m9:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
 		};
+	};
+};
 
-		ehci0: usb@01c1a000 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		ehci1: usb@01c1b000 {
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		pio: pinctrl@01c20800 {
-			led_pins_m9: led_pins@0 {
-				allwinner,pins = "PH13";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-				allwinner,pins = "PH22";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-				allwinner,pins = "PC27";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
 
-		gmac: ethernet@01c30000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
 
-		ir@01f02000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir_pins_a>;
-			status = "okay";
-		};
+&pio {
+	led_pins_m9: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m9>;
-
-		blue {
-			label = "m9:blue:usr";
-			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
-		};
+	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb1_vbus_pin_m9>;
-		gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_m9>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
new file mode 100644
index 000000000000..4404f37d132e
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-mele-a1000g-quad.dts
@@ -0,0 +1,149 @@
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun6i-a31.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Mele A1000G Quad top set box";
+	compatible = "mele,a1000g-quad", "allwinner,sun6i-a31";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m9>;
+
+		blue {
+			label = "m9:blue:usr";
+			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	led_pins_m9: led_pins@0 {
+		allwinner,pins = "PH13";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+		allwinner,pins = "PC27";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_vbus_pin_m9>;
+	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index fa2f403ccf28..008047a018cf 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -50,6 +45,7 @@
 #include "skeleton.dtsi"
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
@@ -66,7 +62,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll6 0>;
 			status = "disabled";
@@ -96,10 +93,22 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
+			clocks = <&cpu>;
+			clock-latency = <244144>; /* 8 32k periods */
+			operating-points = <
+				/* kHz	  uV */
+				1008000	1200000
+				864000	1200000
+				720000	1100000
+				480000	1000000
+				>;
+			#cooling-cells = <2>;
+			cooling-min-level = <0>;
+			cooling-max-level = <3>;
 		};
 
 		cpu@1 {
@@ -121,6 +130,38 @@
 		};
 	};
 
+	thermal-zones {
+		cpu_thermal {
+			/* milliseconds */
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+			thermal-sensors = <&rtp>;
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					/* milliCelsius */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit {
+					/* milliCelsius */
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	memory {
 		reg = <0x40000000 0x80000000>;
 	};
@@ -196,6 +237,14 @@
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
+
+			/*
+			 * Clock AHB1 from PLL6, instead of CPU/AXI which
+			 * has rate changes due to cpufreq. Also the DMA
+			 * controller requires AHB1 clocked from PLL6.
+			 */
+			assigned-clocks = <&ahb1>;
+			assigned-clock-parents = <&pll6 0>;
 		};
 
 		ahb1_gates: clk@01c20060 {
@@ -251,9 +300,10 @@
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_i2c3", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2", "apb2_uart3",
-					"apb2_uart4", "apb2_uart5";
+					     "apb2_i2c2", "apb2_i2c3",
+					     "apb2_uart0", "apb2_uart1",
+					     "apb2_uart2", "apb2_uart3",
+					     "apb2_uart4", "apb2_uart5";
 		};
 
 		mmc0_clk: clk@01c20088 {
@@ -330,7 +380,7 @@
 
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
-		        #reset-cells = <1>;
+			#reset-cells = <1>;
 			compatible = "allwinner,sun6i-a31-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&osc24M>;
@@ -340,10 +390,13 @@
 		};
 
 		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
 		 */
 		mii_phy_tx_clk: clk@1 {
 			#clock-cells = <0>;
@@ -381,10 +434,6 @@
 			clocks = <&ahb1_gates 6>;
 			resets = <&ahb1_rst 6>;
 			#dma-cells = <1>;
-
-			/* DMA controller requires AHB1 clocked from PLL6 */
-			assigned-clocks = <&ahb1>;
-			assigned-clock-parents = <&pll6 0>;
 		};
 
 		mmc0: mmc@01c0f000 {
@@ -402,6 +451,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -419,6 +470,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -436,6 +489,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -453,6 +508,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c19400 {
@@ -575,12 +632,21 @@
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+						 "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			gmac_pins_mii_a: gmac_mii@0 {
 				allwinner,pins = "PA0", "PA1", "PA2", "PA3",
 						"PA8", "PA9", "PA11",
@@ -805,7 +871,8 @@
 		};
 
 		timer@01c60000 {
-			compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+			compatible = "allwinner,sun6i-a31-hstimer",
+				     "allwinner,sun7i-a20-hstimer";
 			reg = <0x01c60000 0x1000>;
 			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
@@ -896,7 +963,8 @@
 			ar100: ar100_clk {
 				compatible = "allwinner,sun6i-a31-ar100-clk";
 				#clock-cells = <0>;
-				clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+				clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
+					 <&pll6 0>;
 				clock-output-names = "ar100";
 			};
 
@@ -973,6 +1041,27 @@
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
+
+			p2wi_pins: p2wi {
+				allwinner,pins = "PL0", "PL1";
+				allwinner,function = "s_p2wi";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		p2wi: i2c@01f03400 {
+			compatible = "allwinner,sun6i-a31-p2wi";
+			reg = <0x01f03400 0x400>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 3>;
+			clock-frequency = <100000>;
+			resets = <&apb0_rst 3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&p2wi_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sun6i-a31s-cs908.dts b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
index bc3734f67cf0..1e2411a2bcea 100644
--- a/arch/arm/boot/dts/sun6i-a31s-cs908.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-cs908.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,10 +48,14 @@
 / {
 	model = "CSQ CS908 top set box";
 	compatible = "csq,cs908", "allwinner,sun6i-a31s";
-};
 
-&usbphy {
-	status = "okay";
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 };
 
 &ehci0 {
@@ -67,25 +66,6 @@
 	status = "okay";
 };
 
-&ohci1 {
-	status = "okay";
-};
-
-&pio {
-	usb1_vbus_pin_csq908: usb1_vbus_pin@0 {
-		allwinner,pins = "PC27";
-		allwinner,function = "gpio_out";
-		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
-	status = "okay";
-};
-
 &gmac {
 	pinctrl-names = "default";
 	pinctrl-0 = <&gmac_pins_mii_a>;
@@ -102,3 +82,17 @@
 	pinctrl-0 = <&ir_pins_a>;
 	status = "okay";
 };
+
+&ohci1 {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi
index eaf5ec8fd459..c17a32771b98 100644
--- a/arch/arm/boot/dts/sun6i-a31s.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s.dtsi
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this library; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 5dd139e7792e..9f7b472e6725 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -65,160 +60,164 @@
 		serial2 = &uart7;
 	};
 
-	soc@01c00000 {
-		spi0: spi@01c05000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_pins_a>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-			cd-inverted;
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_bananapi>;
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
+		green {
+			label = "bananapi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
 		};
+	};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_bananapi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
+	};
+};
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+&ahci {
+	status = "okay";
+};
 
-		ahci: sata@01c18000 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
 
-		pinctrl@01c20800 {
-			mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-				allwinner,pins = "PH10";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			gmac_power_pin_bananapi: gmac_power_pin@0 {
-				allwinner,pins = "PH23";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_bananapi: led_pins@0 {
-				allwinner,pins = "PH24";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
 
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_b>;
-			status = "okay";
-		};
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-		uart7: serial@01c29c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart7_pins_a>;
-			status = "okay";
-		};
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+&ohci0 {
+	status = "okay";
+};
 
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+&ohci1 {
+	status = "okay";
+};
 
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			phy-supply = <&reg_gmac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+&pio {
+	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_bananapi>;
-
-		green {
-			label = "bananapi:green:usr";
-			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
-		};
+	gmac_power_pin_bananapi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+	led_pins_bananapi: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
+&reg_usb1_vbus {
+	status = "okay";
+};
 
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_power_pin_bananapi>;
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
-	};
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>,
+		    <&spi0_cs1_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index fb89fe7ed21b..18fcc87f4621 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -55,6 +50,16 @@
 	model = "LeMaker Banana Pro";
 	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
 
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart4;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -144,7 +149,7 @@
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_pins_a>;
+	pinctrl-0 = <&ir0_rx_pins_a>;
 	status = "okay";
 };
 
@@ -233,7 +238,9 @@
 
 &spi0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins_a>;
+	pinctrl-0 = <&spi0_pins_a>,
+		    <&spi0_cs0_pins_a>,
+		    <&spi0_cs1_pins_a>;
 	status = "okay";
 };
 
@@ -243,9 +250,9 @@
 	status = "okay";
 };
 
-&uart2 {
+&uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>;
+	pinctrl-0 = <&uart4_pins_b>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
index c4ab6edb6f15..39a51d5143f7 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,94 +54,12 @@
 	model = "Cubietech Cubieboard2";
 	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			led_pins_cubieboard2: led_pins@0 {
-				allwinner,pins = "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
+	aliases {
+		serial0 = &uart0;
+	};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -164,26 +77,94 @@
 			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
 	};
+};
 
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-#include "axp209.dtsi"
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
 
-&cpu0 {
-	cpu-supply = <&reg_dcdc2>;
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
 };
 
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	led_pins_cubieboard2: led_pins@0 {
+		allwinner,pins = "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -208,3 +189,23 @@
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index 8f74a649576d..4611e2f5a99e 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,142 +54,12 @@
 	model = "Cubietech Cubietruck";
 	compatible = "cubietech,cubietruck", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb0_vbus-supply = <&reg_usb0_vbus>;
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 requires pull-up */
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			vmmc3_pin_cubietruck: vmmc3_pin@0 {
-				allwinner,pins = "PH9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_cubietruck: led_pins@0 {
-				allwinner,pins = "PH7", "PH11", "PH20", "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb0_vbus_pin_a: usb0_vbus_pin@0 {
-				allwinner,pins = "PH17";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		pwm: pwm@01c20e00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
-			status = "okay";
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
+	aliases {
+		serial0 = &uart0;
+	};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -223,26 +88,6 @@
 		};
 	};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
-		gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_usb0_vbus: usb0-vbus {
-		pinctrl-0 = <&usb0_vbus_pin_a>;
-		gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -255,12 +100,149 @@
 	};
 };
 
-#include "axp209.dtsi"
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
 &cpu0 {
 	cpu-supply = <&reg_dcdc2>;
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_cubietruck: vmmc3_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_cubietruck: led_pins@0 {
+		allwinner,pins = "PH7", "PH11", "PH20", "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb0_vbus_pin_a: usb0_vbus_pin@0 {
+		allwinner,pins = "PH17";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>, <&pwm1_pins_a>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_cubietruck>;
+	gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
 &reg_dcdc2 {
 	regulator-always-on;
 	regulator-min-microvolt = <1000000>;
@@ -285,3 +267,30 @@
 	regulator-max-microvolt = <3000000>;
 	regulator-name = "avcc";
 };
+
+&reg_usb0_vbus {
+	pinctrl-0 = <&usb0_vbus_pin_a>;
+	gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb0_vbus-supply = <&reg_usb0_vbus>;
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
index 86a944ce19f8..37f4a5497452 100644
--- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts
@@ -3,12 +3,43 @@
  *
  * Wills Wang <wills.wang.open@gmail.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -31,197 +62,8 @@
 		serial4 = &uart5;
 	};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_mmc3_vdd>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pio: pinctrl@01c20800 {
-			ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
-				allwinner,pins = "PH15";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
-				allwinner,pins = "PH9";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
-				allwinner,pins = "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		pwm: pwm@01c20e00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&pwm0_pins_a>;
-			status = "okay";
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		uart2: serial@01c28800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart2_pins_a>;
-			status = "okay";
-		};
-
-		uart3: serial@01c28c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart3_pins_a>;
-			status = "okay";
-		};
-
-		uart4: serial@01c29000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart4_pins_a>;
-			status = "okay";
-		};
-
-		uart5: serial@01c29400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart5_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
-
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
-
-		i2c3: i2c@01c2b800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_pins_a>;
-			status = "okay";
-		};
-
-		spi2: spi@01c17000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_pins_b>;
-			status = "okay";
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			phy-supply = <&reg_gmac_vdd>;
-			/* phy reset config */
-			snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
-			snps,reset-active-low;
-			/* wait 1s after reset, otherwise fail to read phy id */
-			snps,reset-delays-us = <0 10000 1000000>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
-
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
-		gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
-		status = "okay";
-	};
-
-	reg_usb1_vbus: usb1-vbus {
-		pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
-		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	reg_mmc3_vdd: mmc3_vdd {
@@ -246,3 +88,195 @@
 		gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
 	};
 };
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_vdd>;
+	/* phy reset config */
+	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
+	snps,reset-active-low;
+	/* wait 1s after reset, otherwise fail to read phy id */
+	snps,reset-delays-us = <0 10000 1000000>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_a>;
+	status = "okay";
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_mmc3_vdd>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
+		allwinner,pins = "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
+		allwinner,pins = "PH9";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
+		allwinner,pins = "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_pins_a>;
+	status = "okay";
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
+	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_b>,
+		    <&spi2_cs0_pins_b>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_a>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
index 06148b4d000f..f32f6f20d923 100644
--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
+++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,123 +52,12 @@
 	model = "I12 / Q5 / QT840A A20 tvbox";
 	compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>;
-			vmmc-supply = <&reg_vmmc3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc3_pins_a: mmc3@0 {
-				/* AP6210 / AP6330 requires pull-up */
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
-				allwinner,pins = "PH12";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
-				allwinner,pins = "PH21";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_i12_tvbox: led_pins@0 {
-				allwinner,pins = "PH9", "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			phy-supply = <&reg_gmac_3v3>;
-			status = "okay";
-
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -192,14 +76,6 @@
 		};
 	};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
-
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
-
 	reg_vmmc3: vmmc3 {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -236,3 +112,136 @@
 		gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>;
+	vmmc-supply = <&reg_vmmc3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc3_pins_a {
+	/* AP6210 / AP6330 requires pull-up */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vmmc3_pin_i12_tvbox: vmmc3_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	vmmc3_io_pin_i12_tvbox: vmmc3_io_pin@0 {
+		allwinner,pins = "PH12";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_i12_tvbox: gmac_power_pin@0 {
+		allwinner,pins = "PH21";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_i12_tvbox: led_pins@0 {
+		allwinner,pins = "PH9", "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts
index 5add9f243ec3..8d9ea48dd98c 100644
--- a/arch/arm/boot/dts/sun7i-a20-m3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-m3.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,114 +54,120 @@
 	model = "Mele M3";
 	compatible = "mele,m3", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		mmc2: mmc@01c11000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc2_pins_a>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			non-removable;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_m3>;
 
-		ehci0: usb@01c14000 {
-			status = "okay";
+		blue {
+			label = "m3:blue:usr";
+			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
 		};
+	};
+};
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
 
-		pinctrl@01c20800 {
-			led_pins_m3: led_pins@0 {
-				allwinner,pins = "PH20";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
 
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
+&ohci0 {
+	status = "okay";
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_m3>;
+&ohci1 {
+	status = "okay";
+};
 
-		blue {
-			label = "m3:blue:usr";
-			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;
-		};
+&pio {
+	led_pins_m3: led_pins@0 {
+		allwinner,pins = "PH20";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&reg_usb1_vbus {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-mk808c.dts b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
new file mode 100644
index 000000000000..4f432f8ade77
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-mk808c.dts
@@ -0,0 +1,148 @@
+/*
+ * Copyright 2015 Marcus Cooper
+ *
+ * Marcus Cooper <codekipper@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "mk808c";
+	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
index 12ded69d61eb..769726dfb046 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts
@@ -19,11 +19,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -60,118 +55,124 @@
 	model = "Olimex A20-OLinuXino-LIME";
 	compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		ohci0: usb@01c14400 {
-			status = "okay";
+		green {
+			label = "a20-olinuxino-lime:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
+	};
+};
 
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
-	};
+&ohci0 {
+	status = "okay";
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinolime>;
+&ohci1 {
+	status = "okay";
+};
 
-		green {
-			label = "a20-olinuxino-lime:green:usr";
-			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
-	};
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
index 260dbd3bf29d..8acff78272b7 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,176 +52,182 @@
 	model = "Olimex A20-OLinuXino-LIME2";
 	compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	aliases {
+		serial0 = &uart0;
+	};
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxinolime>;
 
-		ohci0: usb@01c14400 {
-			status = "okay";
+		green {
+			label = "a20-olinuxino-lime2:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
+	};
 
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
+	reg_axp_ipsout: axp_ipsout {
+		compatible = "regulator-fixed";
+		regulator-name = "axp-ipsout";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		pinctrl@01c20800 {
-			ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-				allwinner,pins = "PC3";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
 
-			led_pins_olinuxinolime: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		acin-supply = <&reg_axp_ipsout>;
+		vin2-supply = <&reg_axp_ipsout>;
+		vin3-supply = <&reg_axp_ipsout>;
+		ldo24in-supply = <&reg_axp_ipsout>;
+		ldo3in-supply = <&reg_axp_ipsout>;
+
+		regulators {
+			vdd_rtc: ldo1 {
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
 			};
-		};
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+			avcc: ldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-
-				acin-supply = <&reg_axp_ipsout>;
-				vin2-supply = <&reg_axp_ipsout>;
-				vin3-supply = <&reg_axp_ipsout>;
-				ldo24in-supply = <&reg_axp_ipsout>;
-				ldo3in-supply = <&reg_axp_ipsout>;
-
-				regulators {
-					vdd_rtc: ldo1 {
-						regulator-min-microvolt = <1300000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-					};
-
-					avcc: ldo2 {
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vcc_csi0: ldo3 {
-						regulator-min-microvolt = <700000>;
-						regulator-max-microvolt = <3500000>;
-						regulator-always-on;
-					};
-
-					vcc_csi1: ldo4 {
-						regulator-min-microvolt = <1250000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vdd_cpu: dcdc2 {
-						regulator-min-microvolt = <700000>;
-						regulator-max-microvolt = <2275000>;
-						regulator-always-on;
-					};
-
-					vdd_int: dcdc3 {
-						regulator-min-microvolt = <700000>;
-						regulator-max-microvolt = <3500000>;
-						regulator-always-on;
-					};
-				};
+			vcc_csi0: ldo3 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
 			};
-		};
 
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
+			vcc_csi1: ldo4 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
 
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_rgmii_a>;
-			phy = <&phy1>;
-			phy-mode = "rgmii";
-			status = "okay";
+			vdd_cpu: dcdc2 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <2275000>;
+				regulator-always-on;
+			};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
+			vdd_int: dcdc3 {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
 			};
 		};
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxinolime>;
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
 
-		green {
-			label = "a20-olinuxino-lime2:green:usr";
-			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-	reg_ahci_5v: ahci-5v {
-		pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-		gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
+&ohci0 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
-	};
+&ohci1 {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&pio {
+	ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+		allwinner,pins = "PC3";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_axp_ipsout: axp_ipsout {
-		compatible = "regulator-fixed";
-		regulator-name = "axp-ipsout";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
+	led_pins_olinuxinolime: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+	gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 714e15ac5416..00f8f25eccae 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -3,12 +3,43 @@
  *
  * Maxime Ripard <maxime.ripard@free-electrons.com>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -32,216 +63,220 @@
 		spi1 = &spi2;
 	};
 
-	soc@01c00000 {
-		spi1: spi@01c06000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins_a>;
-			status = "okay";
-		};
-
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
 
-		mmc3: mmc@01c12000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
-			cd-inverted;
-			status = "okay";
-		};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_olinuxino>;
 
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
+		green {
+			label = "a20-olinuxino-micro:green:usr";
+			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
 		};
+	};
+};
 
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
 
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
+&ehci0 {
+	status = "okay";
+};
 
-		spi2: spi@01c17000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_pins_a>;
-			status = "okay";
-		};
+&ehci1 {
+	status = "okay";
+};
 
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
 
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
 
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
 
-		pinctrl@01c20800 {
-			mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
-				allwinner,pins = "PH11";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-
-			led_pins_olinuxino: led_pins@0 {
-				allwinner,pins = "PH2";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
-
-			button@191 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <191274>;
-			};
-
-			button@392 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <392644>;
-			};
-
-			button@601 {
-				label = "Menu";
-				linux,code = <KEY_MENU>;
-				channel = <0>;
-				voltage = <601151>;
-			};
-
-			button@795 {
-				label = "Search";
-				linux,code = <KEY_SEARCH>;
-				channel = <0>;
-				voltage = <795090>;
-			};
-
-			button@987 {
-				label = "Home";
-				linux,code = <KEY_HOMEPAGE>;
-				channel = <0>;
-				voltage = <987387>;
-			};
-
-			button@1184 {
-				label = "Esc";
-				linux,code = <KEY_ESC>;
-				channel = <0>;
-				voltage = <1184678>;
-			};
-
-			button@1398 {
-				label = "Enter";
-				linux,code = <KEY_ENTER>;
-				channel = <0>;
-				voltage = <1398804>;
-			};
-		};
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
 
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
 
-		uart6: serial@01c29800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart6_pins_a>;
-			status = "okay";
-		};
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
 
-		uart7: serial@01c29c00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart7_pins_a>;
-			status = "okay";
-		};
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
+	button@191 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191274>;
+	};
 
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	button@392 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <392644>;
+	};
 
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
+	button@601 {
+		label = "Menu";
+		linux,code = <KEY_MENU>;
+		channel = <0>;
+		voltage = <601151>;
+	};
 
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
+	button@795 {
+		label = "Search";
+		linux,code = <KEY_SEARCH>;
+		channel = <0>;
+		voltage = <795090>;
+	};
 
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			status = "okay";
-		};
+	button@987 {
+		label = "Home";
+		linux,code = <KEY_HOMEPAGE>;
+		channel = <0>;
+		voltage = <987387>;
+	};
 
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
+	button@1184 {
+		label = "Esc";
+		linux,code = <KEY_ESC>;
+		channel = <0>;
+		voltage = <1184678>;
+	};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	button@1398 {
+		label = "Enter";
+		linux,code = <KEY_ENTER>;
+		channel = <0>;
+		voltage = <1398804>;
 	};
+};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_olinuxino>;
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
 
-		green {
-			label = "a20-olinuxino-micro:green:usr";
-			gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-			default-state = "on";
-		};
-	};
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	cd-inverted;
+	status = "okay";
+};
 
-	reg_ahci_5v: ahci-5v {
-		status = "okay";
-	};
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&pio {
+	mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+	led_pins_olinuxino: led_pins@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_ahci_5v {
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>,
+		    <&spi1_cs0_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>,
+		    <&spi2_cs0_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart6_pins_a>;
+	status = "okay";
+};
+
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
new file mode 100644
index 000000000000..73cd81ee02e3
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts
@@ -0,0 +1,250 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Orange Pi Mini";
+	compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_orangepi>;
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+
+		blue {
+			label = "orangepi:blue:usr";
+			gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_orangepi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_orangepi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_orangepi: led_pins@0 {
+		allwinner,pins = "PH24", "PH25";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH26";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
new file mode 100644
index 000000000000..55a06ceb80ec
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Orange Pi";
+	compatible = "xunlong,orangepi", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_orangepi>;
+
+		green {
+			label = "orangepi:green:usr";
+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
+		};
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac_power_pin_orangepi>;
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+	};
+};
+
+&ahci {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	phy-supply = <&reg_gmac_3v3>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp209.dtsi"
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
+		allwinner,pins = "PH10";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+
+	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
+		allwinner,pins = "PH22";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	gmac_power_pin_orangepi: gmac_power_pin@0 {
+		allwinner,pins = "PH23";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_orangepi: led_pins@0 {
+		allwinner,pins = "PH24";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
+		allwinner,pins = "PH26";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-pll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_bananapro>;
+	gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	pinctrl-0 = <&usb2_vbus_pin_bananapro>;
+	gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
new file mode 100644
index 000000000000..5361fce26b45
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts
@@ -0,0 +1,194 @@
+/*
+ * Copyright 2015 Adam Sampson <ats@offog.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	model = "LinkSprite pcDuino3 Nano";
+	compatible = "linksprite,pcduino3-nano", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_pcduino3_nano>;
+
+		/* Marked "LED3" on the PCB. */
+		usr1 {
+			label = "pcduino3-nano:green:usr1";
+			gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; /* PH16 */
+		};
+
+		/* Marked "LED4" on the PCB. */
+		usr2 {
+			label = "pcduino3-nano:green:usr2";
+			gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; /* PH15 */
+		};
+	};
+};
+
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 {
+		allwinner,pins = "PH2";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	led_pins_pcduino3_nano: led_pins@0 {
+		allwinner,pins = "PH16", "PH15";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 {
+		allwinner,pins = "PH11";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+};
+
+&reg_ahci_5v {
+	pinctrl-0 = <&ahci_pwr_pin_pcduino3_nano>;
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>;
+	gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
index 0a2c2aeb4687..afc9ecebed21 100644
--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
+++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -59,103 +54,12 @@
 	model = "LinkSprite pcDuino3";
 	compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-			vmmc-supply = <&reg_vcc3v3>;
-			bus-width = <4>;
-			cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		usbphy: phy@01c13400 {
-			usb1_vbus-supply = <&reg_usb1_vbus>;
-			usb2_vbus-supply = <&reg_usb2_vbus>;
-			status = "okay";
-		};
-
-		ehci0: usb@01c14000 {
-			status = "okay";
-		};
-
-		ohci0: usb@01c14400 {
-			status = "okay";
-		};
-
-		ahci: sata@01c18000 {
-			target-supply = <&reg_ahci_5v>;
-			status = "okay";
-		};
-
-		ehci1: usb@01c1c000 {
-			status = "okay";
-		};
-
-		ohci1: usb@01c1c400 {
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			ahci_pwr_pin_a: ahci_pwr_pin@0 {
-				allwinner,pins = "PH2";
-			};
-
-			led_pins_pcduino3: led_pins@0 {
-				allwinner,pins = "PH15", "PH16";
-				allwinner,function = "gpio_out";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			key_pins_pcduino3: key_pins@0 {
-				allwinner,pins = "PH17", "PH18", "PH19";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ir0: ir@01c21800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&ir0_pins_a>;
-			status = "okay";
-		};
-
-		uart0: serial@01c28000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&uart0_pins_a>;
-			status = "okay";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-
-			axp209: pmic@34 {
-				compatible = "x-powers,axp209";
-				reg = <0x34>;
-				interrupt-parent = <&nmi_intc>;
-				interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-				interrupt-controller;
-				#interrupt-cells = <1>;
-			};
-		};
-
-		gmac: ethernet@01c50000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&gmac_pins_mii_a>;
-			phy = <&phy1>;
-			phy-mode = "mii";
-			status = "okay";
+	aliases {
+		serial0 = &uart0;
+	};
 
-			phy1: ethernet-phy@1 {
-				reg = <1>;
-			};
-		};
+	chosen {
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -196,17 +100,114 @@
 			gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
 		};
 	};
+};
 
-	reg_usb1_vbus: usb1-vbus {
-		status = "okay";
+&ahci {
+	target-supply = <&reg_ahci_5v>;
+	status = "okay";
+};
+
+&ahci_pwr_pin_a {
+	allwinner,pins = "PH2";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_mii_a>;
+	phy = <&phy1>;
+	phy-mode = "mii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
 	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		compatible = "x-powers,axp209";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+};
+
+&ir0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ir0_rx_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
 
-	reg_usb2_vbus: usb2-vbus {
-		status = "okay";
+&pio {
+	led_pins_pcduino3: led_pins@0 {
+		allwinner,pins = "PH15", "PH16";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 
-	reg_ahci_5v: ahci-5v {
-		gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-		status = "okay";
+	key_pins_pcduino3: key_pins@0 {
+		allwinner,pins = "PH17", "PH18", "PH19";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 	};
 };
+
+&reg_ahci_5v {
+	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
new file mode 100644
index 000000000000..83c6d3f872ff
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2015 Aleksei Mamlin
+ * Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun7i-a20.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Wexler TAB7200";
+	compatible = "wexler,tab7200", "allwinner,sun7i-a20";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	axp209: pmic@34 {
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@571 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <571428>;
+	};
+
+	button@761 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <761904>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+	cd-inverted;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1450000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1400000>;
+	regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+	regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "avcc";
+};
+
+&reg_usb1_vbus {
+	status = "okay";
+};
+
+&reg_usb2_vbus {
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_usb1_vbus>;
+	usb2_vbus-supply = <&reg_usb2_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index fdd181792b4b..6a63f30c9a69 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -68,7 +63,8 @@
 		ranges;
 
 		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0-hdmi";
 			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
 				 <&ahb_gates 44>;
@@ -104,14 +100,14 @@
 			clocks = <&cpu>;
 			clock-latency = <244144>; /* 8 32k periods */
 			operating-points = <
-				/* kHz    uV */
-				960000  1400000
-				912000  1400000
-				864000  1300000
-				720000  1200000
-				528000  1100000
-				312000  1000000
-				144000  900000
+				/* kHz	  uV */
+				960000	1400000
+				912000	1400000
+				864000	1300000
+				720000	1200000
+				528000	1100000
+				312000	1000000
+				144000	900000
 				>;
 			#cooling-cells = <2>;
 			cooling-min-level = <0>;
@@ -224,7 +220,8 @@
 			compatible = "allwinner,sun4i-a10-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
-			clock-output-names = "pll6_sata", "pll6_other", "pll6";
+			clock-output-names = "pll6_sata", "pll6_other", "pll6",
+					     "pll6_div_4";
 		};
 
 		pll8: clk@01c20040 {
@@ -253,10 +250,16 @@
 
 		ahb: ahb@01c20054 {
 			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-ahb-clk";
+			compatible = "allwinner,sun5i-a13-ahb-clk";
 			reg = <0x01c20054 0x4>;
-			clocks = <&axi>;
+			clocks = <&axi>, <&pll6 3>, <&pll6 1>;
 			clock-output-names = "ahb";
+			/*
+			 * Use PLL6 as parent, instead of CPU/AXI
+			 * which has rate changes due to cpufreq
+			 */
+			assigned-clocks = <&ahb>;
+			assigned-clock-parents = <&pll6 3>;
 		};
 
 		ahb_gates: clk@01c20060 {
@@ -441,11 +444,12 @@
 
 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
-		        #reset-cells = <1>;
+			#reset-cells = <1>;
 			compatible = "allwinner,sun4i-a10-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&pll6 1>;
-			clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+			clock-output-names = "usb_ohci0", "usb_ohci1",
+					     "usb_phy";
 		};
 
 		spi3_clk: clk@01c200d4 {
@@ -465,10 +469,13 @@
 		};
 
 		/*
-		 * The following two are dummy clocks, placeholders used in the gmac_tx
-		 * clock. The gmac driver will choose one parent depending on the PHY
-		 * interface mode, using clk_set_rate auto-reparenting.
-		 * The actual TX clock rate is not controlled by the gmac_tx clock.
+		 * The following two are dummy clocks, placeholders
+		 * used in the gmac_tx clock. The gmac driver will
+		 * choose one parent depending on the PHY interface
+		 * mode, using clk_set_rate auto-reparenting.
+		 *
+		 * The actual TX clock rate is not controlled by the
+		 * gmac_tx clock.
 		 */
 		mii_phy_tx_clk: clk@2 {
 			#clock-cells = <0>;
@@ -527,6 +534,42 @@
 		#size-cells = <1>;
 		ranges;
 
+		sram-controller@01c00000 {
+			compatible = "allwinner,sun4i-a10-sram-controller";
+			reg = <0x01c00000 0x30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_a: sram@00000000 {
+				compatible = "mmio-sram";
+				reg = <0x00000000 0xc000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00000000 0xc000>;
+
+				emac_sram: sram-section@8000 {
+					compatible = "allwinner,sun4i-a10-sram-a3-a4";
+					reg = <0x8000 0x4000>;
+					status = "disabled";
+				};
+			};
+
+			sram_d: sram@00010000 {
+				compatible = "mmio-sram";
+				reg = <0x00010000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00010000 0x1000>;
+
+				otg_sram: sram-section@0000 {
+					compatible = "allwinner,sun4i-a10-sram-d";
+					reg = <0x0000 0x1000>;
+					status = "disabled";
+				};
+			};
+		};
+
 		nmi_intc: interrupt-controller@01c00030 {
 			compatible = "allwinner,sun7i-a20-sc-nmi";
 			interrupt-controller;
@@ -576,6 +619,7 @@
 			reg = <0x01c0b000 0x1000>;
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb_gates 17>;
+			allwinner,sram = <&emac_sram 1>;
 			status = "disabled";
 		};
 
@@ -600,6 +644,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -615,6 +661,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -630,6 +678,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -645,6 +695,8 @@
 				      "sample";
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		usbphy: phy@01c13400 {
@@ -795,6 +847,13 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			uart4_pins_b: uart4@1 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart5_pins_a: uart5@0 {
 				allwinner,pins = "PI10", "PI11";
 				allwinner,function = "uart5";
@@ -896,35 +955,71 @@
 			};
 
 			spi0_pins_a: spi0@0 {
-				allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+				allwinner,pins = "PI11", "PI12", "PI13";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_cs0_pins_a: spi0_cs0@0 {
+				allwinner,pins = "PI10";
+				allwinner,function = "spi0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi0_cs1_pins_a: spi0_cs1@0 {
+				allwinner,pins = "PI14";
 				allwinner,function = "spi0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi1_pins_a: spi1@0 {
-				allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+				allwinner,pins = "PI17", "PI18", "PI19";
+				allwinner,function = "spi1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi1_cs0_pins_a: spi1_cs0@0 {
+				allwinner,pins = "PI16";
 				allwinner,function = "spi1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_a: spi2@0 {
-				allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+				allwinner,pins = "PC20", "PC21", "PC22";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			spi2_pins_b: spi2@1 {
-				allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+				allwinner,pins = "PB15", "PB16", "PB17";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_a: spi2_cs0@0 {
+				allwinner,pins = "PC19";
+				allwinner,function = "spi2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			spi2_cs0_pins_b: spi2_cs0@1 {
+				allwinner,pins = "PB14";
 				allwinner,function = "spi2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
 			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -938,28 +1033,44 @@
 			};
 
 			mmc2_pins_a: mmc2@0 {
-				allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+				allwinner,pins = "PC6", "PC7", "PC8",
+						 "PC9", "PC10", "PC11";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 			};
 
 			mmc3_pins_a: mmc3@0 {
-				allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+				allwinner,pins = "PI4", "PI5", "PI6",
+						 "PI7", "PI8", "PI9";
 				allwinner,function = "mmc3";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir0_pins_a: ir0@0 {
-				    allwinner,pins = "PB3","PB4";
+			ir0_rx_pins_a: ir0@0 {
+				    allwinner,pins = "PB4";
 				    allwinner,function = "ir0";
 				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
-			ir1_pins_a: ir1@0 {
-				    allwinner,pins = "PB22","PB23";
+			ir0_tx_pins_a: ir0@1 {
+				    allwinner,pins = "PB3";
+				    allwinner,function = "ir0";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_rx_pins_a: ir1@0 {
+				    allwinner,pins = "PB23";
+				    allwinner,function = "ir1";
+				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			ir1_tx_pins_a: ir1@1 {
+				    allwinner,pins = "PB22";
 				    allwinner,function = "ir1";
 				    allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				    allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
@@ -1042,7 +1153,7 @@
 		};
 
 		rtp: rtp@01c25000 {
-			compatible = "allwinner,sun4i-a10-ts";
+			compatible = "allwinner,sun5i-a13-ts";
 			reg = <0x01c25000 0x100>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			#thermal-sensor-cells = <0>;
@@ -1129,7 +1240,8 @@
 		};
 
 		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 0>;
@@ -1139,7 +1251,8 @@
 		};
 
 		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 1>;
@@ -1149,7 +1262,8 @@
 		};
 
 		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 2>;
@@ -1159,7 +1273,8 @@
 		};
 
 		i2c3: i2c@01c2b800 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2b800 0x400>;
 			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 3>;
@@ -1169,7 +1284,8 @@
 		};
 
 		i2c4: i2c@01c2c000 {
-			compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+			compatible = "allwinner,sun7i-a20-i2c",
+				     "allwinner,sun4i-a10-i2c";
 			reg = <0x01c2c000 0x400>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb1_gates 15>;
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
new file mode 100644
index 000000000000..7abd0ae3143d
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -0,0 +1,636 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	interrupt-parent = <&gic>;
+
+	chosen {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		framebuffer@0 {
+			compatible = "allwinner,simple-framebuffer",
+				     "simple-framebuffer";
+			allwinner,pipeline = "de_be0-lcd0";
+			clocks = <&pll6 0>;
+			status = "disabled";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus {
+		enable-method = "allwinner,sun8i-a23";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc24M: osc24M_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
+		};
+
+		osc32k: osc32k_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+			clock-output-names = "osc32k";
+		};
+
+		pll1: clk@01c20000 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-pll1-clk";
+			reg = <0x01c20000 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll1";
+		};
+
+		/* dummy clock until actually implemented */
+		pll5: pll5_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			clock-output-names = "pll5";
+		};
+
+		pll6: clk@01c20028 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun6i-a31-pll6-clk";
+			reg = <0x01c20028 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "pll6", "pll6x2";
+		};
+
+		cpu: cpu_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-cpu-clk";
+			reg = <0x01c20050 0x4>;
+
+			/*
+			 * PLL1 is listed twice here.
+			 * While it looks suspicious, it's actually documented
+			 * that way both in the datasheet and in the code from
+			 * Allwinner.
+			 */
+			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
+			clock-output-names = "cpu";
+		};
+
+		axi: axi_clk@01c20050 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-axi-clk";
+			reg = <0x01c20050 0x4>;
+			clocks = <&cpu>;
+			clock-output-names = "axi";
+		};
+
+		ahb1: ahb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun6i-a31-ahb1-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
+			clock-output-names = "ahb1";
+		};
+
+		apb1: apb1_clk@01c20054 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb0-clk";
+			reg = <0x01c20054 0x4>;
+			clocks = <&ahb1>;
+			clock-output-names = "apb1";
+		};
+
+		ahb1_gates: clk@01c20060 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
+			reg = <0x01c20060 0x8>;
+			clocks = <&ahb1>;
+			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
+					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
+					"ahb1_nand", "ahb1_sdram",
+					"ahb1_hstimer", "ahb1_spi0",
+					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
+					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
+					"ahb1_csi", "ahb1_be",	"ahb1_fe",
+					"ahb1_gpu", "ahb1_spinlock",
+					"ahb1_drc";
+		};
+
+		apb1_gates: clk@01c20068 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
+			reg = <0x01c20068 0x4>;
+			clocks = <&apb1>;
+			clock-output-names = "apb1_codec", "apb1_pio",
+					"apb1_daudio0",	"apb1_daudio1";
+		};
+
+		apb2: clk@01c20058 {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun4i-a10-apb1-clk";
+			reg = <0x01c20058 0x4>;
+			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+			clock-output-names = "apb2";
+		};
+
+		apb2_gates: clk@01c2006c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
+			reg = <0x01c2006c 0x4>;
+			clocks = <&apb2>;
+			clock-output-names = "apb2_i2c0", "apb2_i2c1",
+					"apb2_i2c2", "apb2_uart0",
+					"apb2_uart1", "apb2_uart2",
+					"apb2_uart3", "apb2_uart4";
+		};
+
+		mmc0_clk: clk@01c20088 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20088 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc0",
+					     "mmc0_output",
+					     "mmc0_sample";
+		};
+
+		mmc1_clk: clk@01c2008c {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c2008c 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc1",
+					     "mmc1_output",
+					     "mmc1_sample";
+		};
+
+		mmc2_clk: clk@01c20090 {
+			#clock-cells = <1>;
+			compatible = "allwinner,sun4i-a10-mmc-clk";
+			reg = <0x01c20090 0x4>;
+			clocks = <&osc24M>, <&pll6 0>;
+			clock-output-names = "mmc2",
+					     "mmc2_output",
+					     "mmc2_sample";
+		};
+
+		usb_clk: clk@01c200cc {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun8i-a23-usb-clk";
+			reg = <0x01c200cc 0x4>;
+			clocks = <&osc24M>;
+			clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
+					     "usb_hsic_12M", "usb_ohci0";
+		};
+	};
+
+	soc@01c00000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dma: dma-controller@01c02000 {
+			compatible = "allwinner,sun8i-a23-dma";
+			reg = <0x01c02000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ahb1_gates 6>;
+			resets = <&ahb1_rst 6>;
+			#dma-cells = <1>;
+		};
+
+		mmc0: mmc@01c0f000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c0f000 0x1000>;
+			clocks = <&ahb1_gates 8>,
+				 <&mmc0_clk 0>,
+				 <&mmc0_clk 1>,
+				 <&mmc0_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 8>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@01c10000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c10000 0x1000>;
+			clocks = <&ahb1_gates 9>,
+				 <&mmc1_clk 0>,
+				 <&mmc1_clk 1>,
+				 <&mmc1_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 9>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@01c11000 {
+			compatible = "allwinner,sun5i-a13-mmc";
+			reg = <0x01c11000 0x1000>;
+			clocks = <&ahb1_gates 10>,
+				 <&mmc2_clk 0>,
+				 <&mmc2_clk 1>,
+				 <&mmc2_clk 2>;
+			clock-names = "ahb",
+				      "mmc",
+				      "output",
+				      "sample";
+			resets = <&ahb1_rst 10>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		pio: pinctrl@01c20800 {
+			/* compatible gets set in SoC specific dtsi file */
+			reg = <0x01c20800 0x400>;
+			/* interrupts get set in SoC specific dtsi file */
+			clocks = <&apb1_gates 5>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			uart0_pins_a: uart0@0 {
+				allwinner,pins = "PF2", "PF4";
+				allwinner,function = "uart0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc0_pins_a: mmc0@0 {
+				allwinner,pins = "PF0", "PF1", "PF2",
+						 "PF3", "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc1_pins_a: mmc1@0 {
+				allwinner,pins = "PG0", "PG1", "PG2",
+						 "PG3", "PG4", "PG5";
+				allwinner,function = "mmc1";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			mmc2_8bit_pins: mmc2_8bit {
+				allwinner,pins = "PC5", "PC6", "PC8",
+						 "PC9", "PC10", "PC11",
+						 "PC12", "PC13", "PC14",
+						 "PC15";
+				allwinner,function = "mmc2";
+				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c0_pins_a: i2c0@0 {
+				allwinner,pins = "PH2", "PH3";
+				allwinner,function = "i2c0";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c1_pins_a: i2c1@0 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "i2c1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
+			i2c2_pins_a: i2c2@0 {
+				allwinner,pins = "PE12", "PE13";
+				allwinner,function = "i2c2";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+
+		ahb1_rst: reset@01c202c0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202c0 0xc>;
+		};
+
+		apb1_rst: reset@01c202d0 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d0 0x4>;
+		};
+
+		apb2_rst: reset@01c202d8 {
+			#reset-cells = <1>;
+			compatible = "allwinner,sun6i-a31-clock-reset";
+			reg = <0x01c202d8 0x4>;
+		};
+
+		timer@01c20c00 {
+			compatible = "allwinner,sun4i-a10-timer";
+			reg = <0x01c20c00 0xa0>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		wdt0: watchdog@01c20ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x01c20ca0 0x20>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		lradc: lradc@01c22800 {
+			compatible = "allwinner,sun4i-a10-lradc-keys";
+			reg = <0x01c22800 0x100>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@01c28000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 16>;
+			resets = <&apb2_rst 16>;
+			dmas = <&dma 6>, <&dma 6>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart1: serial@01c28400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 17>;
+			resets = <&apb2_rst 17>;
+			dmas = <&dma 7>, <&dma 7>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart2: serial@01c28800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 18>;
+			resets = <&apb2_rst 18>;
+			dmas = <&dma 8>, <&dma 8>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart3: serial@01c28c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c28c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 19>;
+			resets = <&apb2_rst 19>;
+			dmas = <&dma 9>, <&dma 9>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		uart4: serial@01c29000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01c29000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb2_gates 20>;
+			resets = <&apb2_rst 20>;
+			dmas = <&dma 10>, <&dma 10>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+
+		i2c0: i2c@01c2ac00 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2ac00 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 0>;
+			resets = <&apb2_rst 0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@01c2b000 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b000 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 1>;
+			resets = <&apb2_rst 1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@01c2b400 {
+			compatible = "allwinner,sun6i-a31-i2c";
+			reg = <0x01c2b400 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb2_gates 2>;
+			resets = <&apb2_rst 2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		gic: interrupt-controller@01c81000 {
+			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+			reg = <0x01c81000 0x1000>,
+			      <0x01c82000 0x1000>,
+			      <0x01c84000 0x2000>,
+			      <0x01c86000 0x2000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		rtc: rtc@01f00000 {
+			compatible = "allwinner,sun6i-a31-rtc";
+			reg = <0x01f00000 0x54>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prcm@01f01400 {
+			compatible = "allwinner,sun8i-a23-prcm";
+			reg = <0x01f01400 0x200>;
+
+			ar100: ar100_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&osc24M>;
+				clock-output-names = "ar100";
+			};
+
+			ahb0: ahb0_clk {
+				compatible = "fixed-factor-clock";
+				#clock-cells = <0>;
+				clock-div = <1>;
+				clock-mult = <1>;
+				clocks = <&ar100>;
+				clock-output-names = "ahb0";
+			};
+
+			apb0: apb0_clk {
+				compatible = "allwinner,sun8i-a23-apb0-clk";
+				#clock-cells = <0>;
+				clocks = <&ahb0>;
+				clock-output-names = "apb0";
+			};
+
+			apb0_gates: apb0_gates_clk {
+				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
+				#clock-cells = <1>;
+				clocks = <&apb0>;
+				clock-output-names = "apb0_pio", "apb0_timer",
+						"apb0_rsb", "apb0_uart",
+						"apb0_i2c";
+			};
+
+			apb0_rst: apb0_rst {
+				compatible = "allwinner,sun6i-a31-clock-reset";
+				#reset-cells = <1>;
+			};
+		};
+
+		cpucfg@01f01c00 {
+			compatible = "allwinner,sun8i-a23-cpuconfig";
+			reg = <0x01f01c00 0x300>;
+		};
+
+		r_uart: serial@01f02800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x01f02800 0x400>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&apb0_gates 4>;
+			resets = <&apb0_rst 4>;
+			status = "disabled";
+		};
+
+		r_pio: pinctrl@01f02c00 {
+			compatible = "allwinner,sun8i-a23-r-pinctrl";
+			reg = <0x01f02c00 0x400>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb0_gates 0>;
+			resets = <&apb0_rst 0>;
+			gpio-controller;
+			interrupt-controller;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#gpio-cells = <3>;
+
+			r_uart_pins_a: r_uart@0 {
+				allwinner,pins = "PL2", "PL3";
+				allwinner,function = "s_uart";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-evb.dts b/arch/arm/boot/dts/sun8i-a23-evb.dts
new file mode 100644
index 000000000000..610786e635fa
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a23-evb.dts
@@ -0,0 +1,134 @@
+/*
+ * Copyright 2015 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a23.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner A23 Evaluation Board";
+	compatible = "allwinner,sun8i-a23-evb", "allwinner,sun8i-a23";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@190 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <190000>;
+	};
+
+	button@390 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <390000>;
+	};
+
+	button@600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_evb>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_evb: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+/*
+ * The RX line has a non-populated resistance. In order to use it, you
+ * need to solder R207 on the back of the board in order to close the
+ * line and get a working UART.
+ */
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
index dd31c53e2ab6..382d64c3b78e 100644
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
index 623573e46080..95134c69cfc1 100644
--- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
+++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -64,71 +59,69 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	soc@01c00000 {
-		mmc0: mmc@01c0f000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
-			vmmc-supply = <&reg_vcc3v0>;
-			bus-width = <4>;
-			cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
-			cd-inverted;
-			status = "okay";
-		};
-
-		pinctrl@01c20800 {
-			mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
-				allwinner,pins = "PB4";
-				allwinner,function = "gpio_in";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-			};
-		};
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
 
-		lradc: lradc@01c22800 {
-			vref-supply = <&reg_vcc3v0>;
-			status = "okay";
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
 
-			button@200 {
-				label = "Volume Up";
-				linux,code = <KEY_VOLUMEUP>;
-				channel = <0>;
-				voltage = <200000>;
-			};
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	/* pull-ups and devices require PMIC regulator */
+	status = "failed";
+};
 
-			button@400 {
-				label = "Volume Down";
-				linux,code = <KEY_VOLUMEDOWN>;
-				channel = <0>;
-				voltage = <400000>;
-			};
-		};
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
 
-		i2c0: i2c@01c2ac00 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins_a>;
-			status = "okay";
-		};
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
 
-		i2c1: i2c@01c2b000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_pins_a>;
-			status = "okay";
-		};
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
 
-		i2c2: i2c@01c2b400 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_pins_a>;
-			/* pull-ups and devices require PMIC regulator */
-			status = "failed";
-		};
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
 
-		r_uart: serial@01f02800 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&r_uart_pins_a>;
-			status = "okay";
-		};
+&pio {
+	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
 };
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi
index 382ebd137ee4..8698f7aa31c7 100644
--- a/arch/arm/boot/dts/sun8i-a23.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -47,206 +42,14 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun8i-a23-a33.dtsi"
 
 / {
-	interrupt-parent = <&gic>;
-
-	chosen {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		framebuffer@0 {
-			compatible = "allwinner,simple-framebuffer",
-				     "simple-framebuffer";
-			allwinner,pipeline = "de_be0-lcd0";
-			clocks = <&pll6 0>;
-			status = "disabled";
-		};
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <1>;
-		};
-	};
-
 	memory {
 		reg = <0x40000000 0x40000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		osc24M: osc24M_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <24000000>;
-			clock-output-names = "osc24M";
-		};
-
-		osc32k: osc32k_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			clock-output-names = "osc32k";
-		};
-
-		pll1: clk@01c20000 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-pll1-clk";
-			reg = <0x01c20000 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll1";
-		};
-
-		/* dummy clock until actually implemented */
-		pll5: pll5_clk {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <0>;
-			clock-output-names = "pll5";
-		};
-
-		pll6: clk@01c20028 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun6i-a31-pll6-clk";
-			reg = <0x01c20028 0x4>;
-			clocks = <&osc24M>;
-			clock-output-names = "pll6", "pll6x2";
-		};
-
-		cpu: cpu_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-cpu-clk";
-			reg = <0x01c20050 0x4>;
-
-			/*
-			 * PLL1 is listed twice here.
-			 * While it looks suspicious, it's actually documented
-			 * that way both in the datasheet and in the code from
-			 * Allwinner.
-			 */
-			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
-			clock-output-names = "cpu";
-		};
-
-		axi: axi_clk@01c20050 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun8i-a23-axi-clk";
-			reg = <0x01c20050 0x4>;
-			clocks = <&cpu>;
-			clock-output-names = "axi";
-		};
-
-		ahb1: ahb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun6i-a31-ahb1-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
-			clock-output-names = "ahb1";
-		};
-
-		apb1: apb1_clk@01c20054 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb0-clk";
-			reg = <0x01c20054 0x4>;
-			clocks = <&ahb1>;
-			clock-output-names = "apb1";
-		};
-
-		ahb1_gates: clk@01c20060 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
-			reg = <0x01c20060 0x8>;
-			clocks = <&ahb1>;
-			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
-					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
-					"ahb1_nand", "ahb1_sdram",
-					"ahb1_hstimer", "ahb1_spi0",
-					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
-					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
-					"ahb1_csi", "ahb1_be",	"ahb1_fe",
-					"ahb1_gpu", "ahb1_spinlock",
-					"ahb1_drc";
-		};
-
-		apb1_gates: clk@01c20068 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
-			reg = <0x01c20068 0x4>;
-			clocks = <&apb1>;
-			clock-output-names = "apb1_codec", "apb1_pio",
-					"apb1_daudio0",	"apb1_daudio1";
-		};
-
-		apb2: clk@01c20058 {
-			#clock-cells = <0>;
-			compatible = "allwinner,sun4i-a10-apb1-clk";
-			reg = <0x01c20058 0x4>;
-			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
-			clock-output-names = "apb2";
-		};
-
-		apb2_gates: clk@01c2006c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
-			reg = <0x01c2006c 0x4>;
-			clocks = <&apb2>;
-			clock-output-names = "apb2_i2c0", "apb2_i2c1",
-					"apb2_i2c2", "apb2_uart0",
-					"apb2_uart1", "apb2_uart2",
-					"apb2_uart3", "apb2_uart4";
-		};
-
-		mmc0_clk: clk@01c20088 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20088 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc0",
-					     "mmc0_output",
-					     "mmc0_sample";
-		};
-
-		mmc1_clk: clk@01c2008c {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c2008c 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc1",
-					     "mmc1_output",
-					     "mmc1_sample";
-		};
-
-		mmc2_clk: clk@01c20090 {
-			#clock-cells = <1>;
-			compatible = "allwinner,sun4i-a10-mmc-clk";
-			reg = <0x01c20090 0x4>;
-			clocks = <&osc24M>, <&pll6 0>;
-			clock-output-names = "mmc2",
-					     "mmc2_output",
-					     "mmc2_sample";
-		};
-
 		mbus_clk: clk@01c2015c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-mbus-clk";
@@ -255,357 +58,11 @@
 			clock-output-names = "mbus";
 		};
 	};
+};
 
-	soc@01c00000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		dma: dma-controller@01c02000 {
-			compatible = "allwinner,sun8i-a23-dma";
-			reg = <0x01c02000 0x1000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&ahb1_gates 6>;
-			resets = <&ahb1_rst 6>;
-			#dma-cells = <1>;
-		};
-
-		mmc0: mmc@01c0f000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c0f000 0x1000>;
-			clocks = <&ahb1_gates 8>,
-				 <&mmc0_clk 0>,
-				 <&mmc0_clk 1>,
-				 <&mmc0_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			resets = <&ahb1_rst 8>;
-			reset-names = "ahb";
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@01c10000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c10000 0x1000>;
-			clocks = <&ahb1_gates 9>,
-				 <&mmc1_clk 0>,
-				 <&mmc1_clk 1>,
-				 <&mmc1_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			resets = <&ahb1_rst 9>;
-			reset-names = "ahb";
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@01c11000 {
-			compatible = "allwinner,sun5i-a13-mmc";
-			reg = <0x01c11000 0x1000>;
-			clocks = <&ahb1_gates 10>,
-				 <&mmc2_clk 0>,
-				 <&mmc2_clk 1>,
-				 <&mmc2_clk 2>;
-			clock-names = "ahb",
-				      "mmc",
-				      "output",
-				      "sample";
-			resets = <&ahb1_rst 10>;
-			reset-names = "ahb";
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		pio: pinctrl@01c20800 {
-			compatible = "allwinner,sun8i-a23-pinctrl";
-			reg = <0x01c20800 0x400>;
-			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb1_gates 5>;
-			gpio-controller;
-			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			uart0_pins_a: uart0@0 {
-				allwinner,pins = "PF2", "PF4";
-				allwinner,function = "uart0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc0_pins_a: mmc0@0 {
-				allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
-				allwinner,function = "mmc0";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			mmc1_pins_a: mmc1@0 {
-				allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
-				allwinner,function = "mmc1";
-				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c0_pins_a: i2c0@0 {
-				allwinner,pins = "PH2", "PH3";
-				allwinner,function = "i2c0";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c1_pins_a: i2c1@0 {
-				allwinner,pins = "PH4", "PH5";
-				allwinner,function = "i2c1";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-
-			i2c2_pins_a: i2c2@0 {
-				allwinner,pins = "PE12", "PE13";
-				allwinner,function = "i2c2";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-
-		ahb1_rst: reset@01c202c0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202c0 0xc>;
-		};
-
-		apb1_rst: reset@01c202d0 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d0 0x4>;
-		};
-
-		apb2_rst: reset@01c202d8 {
-			#reset-cells = <1>;
-			compatible = "allwinner,sun6i-a31-clock-reset";
-			reg = <0x01c202d8 0x4>;
-		};
-
-		timer@01c20c00 {
-			compatible = "allwinner,sun4i-a10-timer";
-			reg = <0x01c20c00 0xa0>;
-			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&osc24M>;
-		};
-
-		wdt0: watchdog@01c20ca0 {
-			compatible = "allwinner,sun6i-a31-wdt";
-			reg = <0x01c20ca0 0x20>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		lradc: lradc@01c22800 {
-			compatible = "allwinner,sun4i-a10-lradc-keys";
-			reg = <0x01c22800 0x100>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		uart0: serial@01c28000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28000 0x400>;
-			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 16>;
-			resets = <&apb2_rst 16>;
-			dmas = <&dma 6>, <&dma 6>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart1: serial@01c28400 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28400 0x400>;
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 17>;
-			resets = <&apb2_rst 17>;
-			dmas = <&dma 7>, <&dma 7>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart2: serial@01c28800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28800 0x400>;
-			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 18>;
-			resets = <&apb2_rst 18>;
-			dmas = <&dma 8>, <&dma 8>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart3: serial@01c28c00 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c28c00 0x400>;
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 19>;
-			resets = <&apb2_rst 19>;
-			dmas = <&dma 9>, <&dma 9>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		uart4: serial@01c29000 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01c29000 0x400>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb2_gates 20>;
-			resets = <&apb2_rst 20>;
-			dmas = <&dma 10>, <&dma 10>;
-			dma-names = "rx", "tx";
-			status = "disabled";
-		};
-
-		i2c0: i2c@01c2ac00 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2ac00 0x400>;
-			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 0>;
-			resets = <&apb2_rst 0>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c1: i2c@01c2b000 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b000 0x400>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 1>;
-			resets = <&apb2_rst 1>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		i2c2: i2c@01c2b400 {
-			compatible = "allwinner,sun6i-a31-i2c";
-			reg = <0x01c2b400 0x400>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb2_gates 2>;
-			resets = <&apb2_rst 2>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		gic: interrupt-controller@01c81000 {
-			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
-			reg = <0x01c81000 0x1000>,
-			      <0x01c82000 0x1000>,
-			      <0x01c84000 0x2000>,
-			      <0x01c86000 0x2000>;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-		};
-
-		rtc: rtc@01f00000 {
-			compatible = "allwinner,sun6i-a31-rtc";
-			reg = <0x01f00000 0x54>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		prcm@01f01400 {
-			compatible = "allwinner,sun8i-a23-prcm";
-			reg = <0x01f01400 0x200>;
-
-			ar100: ar100_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&osc24M>;
-				clock-output-names = "ar100";
-			};
-
-			ahb0: ahb0_clk {
-				compatible = "fixed-factor-clock";
-				#clock-cells = <0>;
-				clock-div = <1>;
-				clock-mult = <1>;
-				clocks = <&ar100>;
-				clock-output-names = "ahb0";
-			};
-
-			apb0: apb0_clk {
-				compatible = "allwinner,sun8i-a23-apb0-clk";
-				#clock-cells = <0>;
-				clocks = <&ahb0>;
-				clock-output-names = "apb0";
-			};
-
-			apb0_gates: apb0_gates_clk {
-				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
-				#clock-cells = <1>;
-				clocks = <&apb0>;
-				clock-output-names = "apb0_pio", "apb0_timer",
-						"apb0_rsb", "apb0_uart",
-						"apb0_i2c";
-			};
-
-			apb0_rst: apb0_rst {
-				compatible = "allwinner,sun6i-a31-clock-reset";
-				#reset-cells = <1>;
-			};
-		};
-
-		r_uart: serial@01f02800 {
-			compatible = "snps,dw-apb-uart";
-			reg = <0x01f02800 0x400>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			reg-shift = <2>;
-			reg-io-width = <4>;
-			clocks = <&apb0_gates 4>;
-			resets = <&apb0_rst 4>;
-			status = "disabled";
-		};
-
-		r_pio: pinctrl@01f02c00 {
-			compatible = "allwinner,sun8i-a23-r-pinctrl";
-			reg = <0x01f02c00 0x400>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb0_gates 0>;
-			resets = <&apb0_rst 0>;
-			gpio-controller;
-			interrupt-controller;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			#gpio-cells = <3>;
-
-			r_uart_pins_a: r_uart@0 {
-				allwinner,pins = "PL2", "PL3";
-				allwinner,function = "s_uart";
-				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-			};
-		};
-	};
+&pio {
+	compatible = "allwinner,sun8i-a23-pinctrl";
+	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 };
diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
new file mode 100644
index 000000000000..19db844863bb
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts
@@ -0,0 +1,88 @@
+/*
+ * Copyright 2015 Vishnu Patekar
+ * Vishnu Patekar <vishnupatekar0510@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "ET Q8 Quad Core Tablet (v1.6)";
+	compatible = "et,q8-v1.6", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
new file mode 100644
index 000000000000..866703355b9c
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts
@@ -0,0 +1,125 @@
+/*
+ * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Allwinner GA10H Quad Core Tablet (v1.1)";
+	compatible = "allwinner,ga10h-v1.1", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &r_uart;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <200000>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <400000>;
+	};
+
+	button@600 {
+		label = "Back";
+		linux,code = <KEY_BACK>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&pio {
+	mmc0_cd_pin_q8h: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&r_uart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_uart_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
new file mode 100644
index 000000000000..5788c29cb56a
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a33.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Sinlinx SinA33";
+	compatible = "sinlinx,sina33", "allwinner,sun8i-a33";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&lradc {
+	vref-supply = <&reg_vcc3v0>;
+	status = "okay";
+
+	button@200 {
+		label = "Volume Up";
+		linux,code = <KEY_VOLUMEUP>;
+		channel = <0>;
+		voltage = <191011>;
+	};
+
+	button@400 {
+		label = "Volume Down";
+		linux,code = <KEY_VOLUMEDOWN>;
+		channel = <0>;
+		voltage = <391304>;
+	};
+
+	button@600 {
+		label = "Home";
+		linux,code = <KEY_HOME>;
+		channel = <0>;
+		voltage = <600000>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2_8bit_pins {
+	/* eMMC is missing pull-ups */
+	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+};
+
+&pio {
+	mmc0_cd_pin_sina33: mmc0_cd_pin@0 {
+		allwinner,pins = "PB4";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
new file mode 100644
index 000000000000..85ee08098b7b
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -0,0 +1,97 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+	cpus {
+		cpu@2 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <3>;
+		};
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	clocks {
+		/* Dummy clock for pll11 (DDR1) until actually implemented */
+		pll11: pll11_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <0>;
+			clock-output-names = "pll11";
+		};
+
+		mbus_clk: clk@01c2015c {
+			#clock-cells = <0>;
+			compatible = "allwinner,sun8i-a23-mbus-clk";
+			reg = <0x01c2015c 0x4>;
+			clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
+			clock-output-names = "mbus";
+		};
+	};
+};
+
+&pio {
+	compatible = "allwinner,sun8i-a33-pinctrl";
+	interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+
+	uart0_pins_b: uart0@1 {
+		allwinner,pins = "PB0", "PB1";
+		allwinner,function = "uart0";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
new file mode 100644
index 000000000000..6484dcf69873
--- /dev/null
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2015 Tyler Baker
+ *
+ * Tyler Baker <tyler.baker@linaro.org>
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun9i-a80.dtsi"
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+	model = "Cubietech Cubieboard4";
+	compatible = "cubietech,a80-cubieboard4", "allwinner,sun9i-a80";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+};
+
+&pio {
+	mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
+		allwinner,pins = "PH18";
+		allwinner,function = "gpio_in";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+	};
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
+	cd-inverted;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v0>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts
index a3fed2bdf620..6ce4b5e8b615 100644
--- a/arch/arm/boot/dts/sun9i-a80-optimus.dts
+++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -64,7 +59,7 @@
 	};
 
 	chosen {
-		bootargs = "earlyprintk console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
@@ -86,6 +81,29 @@
 			gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
 		};
 	};
+
+	reg_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_pin_optimus>;
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
 };
 
 &i2c3 {
@@ -99,6 +117,14 @@
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
 &pio {
 	led_pins_optimus: led-pins@0 {
 		allwinner,pins = "PH0", "PH1";
@@ -113,6 +139,20 @@
 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 	};
+
+	usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
+		allwinner,pins = "PH4";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
+
+	usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
+		allwinner,pins = "PH5";
+		allwinner,function = "gpio_out";
+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+	};
 };
 
 &mmc0 {
@@ -134,6 +174,12 @@
 	status = "okay";
 };
 
+&reg_usb1_vbus {
+	pinctrl-0 = <&usb1_vbus_pin_optimus>;
+	gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
@@ -150,3 +196,17 @@
 	/* Enable internal pull-up */
 	allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
 };
+
+&usbphy1 {
+	phy-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usbphy3 {
+	phy-supply = <&reg_usb3_vbus>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index f0f6fb91f8c3..a43ad779ee2f 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -114,6 +109,16 @@
 		reg = <0 0x20000000 0x02 0>;
 	};
 
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -137,6 +142,28 @@
 			clock-output-names = "osc32k";
 		};
 
+		usb_mod_clk: clk@00a08000 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-mod-clk";
+			reg = <0x00a08000 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb0_ahb", "usb_ohci0",
+					     "usb1_ahb", "usb_ohci1",
+					     "usb2_ahb", "usb_ohci2";
+		};
+
+		usb_phy_clk: clk@00a08004 {
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			compatible = "allwinner,sun9i-a80-usb-phy-clk";
+			reg = <0x00a08004 0x4>;
+			clocks = <&ahb1_gates 1>;
+			clock-output-names = "usb_phy0", "usb_hsic1_480M",
+					     "usb_phy1", "usb_hsic2_480M",
+					     "usb_phy2", "usb_hsic_12M";
+		};
+
 		pll4: clk@0600000c {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun9i-a80-pll4-clk";
@@ -257,7 +284,7 @@
 					"ahb0_ss", "ahb0_sd", "ahb0_nand1",
 					"ahb0_nand0", "ahb0_sdram",
 					"ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
-					"ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+					"ahb0_spi0", "ahb0_spi1", "ahb0_spi2",
 					"ahb0_spi3";
 		};
 
@@ -323,6 +350,98 @@
 		 */
 		ranges = <0 0 0 0x20000000>;
 
+		ehci0: usb@00a00000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a00000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 1>;
+			resets = <&usb_mod_clk 17>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci0: usb@00a00400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a00400 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 1>, <&usb_mod_clk 2>;
+			resets = <&usb_mod_clk 17>;
+			phys = <&usbphy1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy1: phy@00a00800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a00800 0x4>;
+			clocks = <&usb_phy_clk 1>;
+			clock-names = "phy";
+			resets = <&usb_phy_clk 17>;
+			reset-names = "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
+		ehci1: usb@00a01000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a01000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 3>;
+			resets = <&usb_mod_clk 18>;
+			phys = <&usbphy2>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy2: phy@00a01800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a01800 0x4>;
+			clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 3>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+			/* usb1 is always used with HSIC */
+			phy_type = "hsic";
+		};
+
+		ehci2: usb@00a02000 {
+			compatible = "allwinner,sun9i-a80-ehci", "generic-ehci";
+			reg = <0x00a02000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 5>;
+			resets = <&usb_mod_clk 19>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		ohci2: usb@00a02400 {
+			compatible = "allwinner,sun9i-a80-ohci", "generic-ohci";
+			reg = <0x00a02400 0x100>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_mod_clk 5>, <&usb_mod_clk 6>;
+			resets = <&usb_mod_clk 19>;
+			phys = <&usbphy3>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
+		usbphy3: phy@00a02800 {
+			compatible = "allwinner,sun9i-a80-usb-phy";
+			reg = <0x00a02800 0x4>;
+			clocks = <&usb_phy_clk 4>, <&usb_phy_clk 10>,
+				 <&usb_phy_clk 5>;
+			clock-names = "hsic_480M", "hsic_12M", "phy";
+			resets = <&usb_phy_clk 20>, <&usb_phy_clk 21>;
+			reset-names = "hsic", "phy";
+			status = "disabled";
+			#phy-cells = <0>;
+		};
+
 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
@@ -333,6 +452,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc1: mmc@01c10000 {
@@ -345,6 +466,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc2: mmc@01c11000 {
@@ -357,6 +480,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc3: mmc@01c12000 {
@@ -369,6 +494,8 @@
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
 		};
 
 		mmc_config_clk: clk@01c13000 {
@@ -438,6 +565,12 @@
 			clocks = <&osc24M>;
 		};
 
+		wdt: watchdog@06000ca0 {
+			compatible = "allwinner,sun6i-a31-wdt";
+			reg = <0x06000ca0 0x20>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pio: pinctrl@06000800 {
 			compatible = "allwinner,sun9i-a80-pinctrl";
 			reg = <0x06000800 0x400>;
diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
index e02baa66b33c..51cc8383f70f 100644
--- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -18,11 +18,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index ed8a8acd3d34..bd43ed6d6ec7 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1647,6 +1647,10 @@
 		target-12v-supply = <&vdd_12v0_sata>;
 	};
 
+	hda@0,70030000 {
+		status = "okay";
+	};
+
 	padctl@0,7009f000 {
 		pinctrl-0 = <&padctl_default>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 5c3f7813360d..79e724bb7df7 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -899,6 +899,7 @@
 	sdhci@0,700b0600 {
 		status = "okay";
 		bus-width = <8>;
+		non-removable;
 	};
 
 	ahub@0,70300000 {
@@ -1040,6 +1041,8 @@
 			compatible = "regulator-fixed";
 			reg = <5>;
 			regulator-name = "+VDD_LED";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 			vin-supply = <&vdd_mux>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 4db9be02399e..01a9f742b08f 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -633,11 +633,11 @@
 		clocks = <&tegra_car TEGRA124_CLK_HDA>,
 		         <&tegra_car TEGRA124_CLK_HDA2HDMI>,
 			 <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>;
-		clock-names = "hda", "hda2hdmi", "hdacodec_2x";
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
 		resets = <&tegra_car 125>, /* hda */
 			 <&tegra_car 128>, /* hda2hdmi */
 			 <&tegra_car 111>; /* hda2codec_2x */
-		reset-names = "hda", "hda2hdmi", "hdacodec_2x";
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e2fed2712249..aea8994b35f2 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -31,6 +31,7 @@
 
 			vdd-supply = <&hdmi_vdd_reg>;
 			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi>;
 
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
@@ -893,6 +894,17 @@
 			gpio = <&gpio TEGRA_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		vdd_hdmi: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "VDDIO_HDMI";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+			vin-supply = <&vdd_5v0_reg>;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index a1b682ea01bd..bb1ca158273c 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/input/input.h>
 #include "tegra30.dtsi"
 
 /**
@@ -12,7 +13,7 @@
  * tegra30-cardhu-a04.dts.
  * The identification of board is done in two ways, by looking the sticker
  * on PCB and by reading board id eeprom.
- * The stciker will have number like 600-81291-1000-002 C.3. In this 4th
+ * The sticker will have number like 600-81291-1000-002 C.3. In this 4th
  * number is the fab version like here it is 002 and hence fab version A02.
  * The (downstream internal) U-Boot of Cardhu display the board-id as
  * follows:
@@ -615,4 +616,31 @@
 			 <&tegra_car TEGRA30_CLK_EXTERN1>;
 		clock-names = "pll_a", "pll_a_out0", "mclk";
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			interrupt-parent = <&pmic>;
+			interrupts = <2 0>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			gpio-key,wakeup;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 60e205a0f63d..782b11b2af6a 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -654,6 +654,21 @@
 		reset-names = "fuse";
 	};
 
+	hda@70030000 {
+		compatible = "nvidia,tegra30-hda";
+		reg = <0x70030000 0x10000>;
+		interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA30_CLK_HDA>,
+		         <&tegra_car TEGRA30_CLK_HDA2HDMI>,
+			 <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>;
+		clock-names = "hda", "hda2hdmi", "hda2codec_2x";
+		resets = <&tegra_car 125>, /* hda */
+			 <&tegra_car 128>, /* hda2hdmi */
+			 <&tegra_car 111>; /* hda2codec_2x */
+		reset-names = "hda", "hda2hdmi", "hda2codec_2x";
+		status = "disabled";
+	};
+
 	ahub@70080000 {
 		compatible = "nvidia,tegra30-ahub";
 		reg = <0x70080000 0x200
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
new file mode 100644
index 000000000000..200b0c99ed34
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-ld4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-LD4 Reference Board";
+	compatible = "socionext,ph1-ld4-ref", "socionext,ph1-ld4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
new file mode 100644
index 000000000000..6a34c56e4693
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-LD4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-ld4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
new file mode 100644
index 000000000000..d891135a70c2
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-pro4.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-Pro4 Reference Board";
+	compatible = "socionext,ph1-pro4-ref", "socionext,ph1-pro4";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 50 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
new file mode 100644
index 000000000000..dc633603aed2
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-Pro4 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-pro4";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
new file mode 100644
index 000000000000..3ea64ae009e9
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts
@@ -0,0 +1,80 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld3.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-sLD3 Reference Board";
+	compatible = "socionext,ph1-sld3-ref", "socionext,ph1-sld3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000
+		       0xc0000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 49 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
new file mode 100644
index 000000000000..248b1886834f
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi
@@ -0,0 +1,117 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD3 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-sld3";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "socionext,uniphier-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		timer@20000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20000200 0x20>;
+			interrupts = <1 11 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@20000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20000600 0x20>;
+			interrupts = <1 13 0x304>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@20001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x20001000 0x1000>,
+			      <0x20000100 0x100>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
new file mode 100644
index 000000000000..dcdc4f74387d
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts
@@ -0,0 +1,79 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 Reference Board
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "uniphier-ph1-sld8.dtsi"
+/include/ "uniphier-support-card.dtsi"
+
+/ {
+	model = "UniPhier PH1-sLD8 Reference Board";
+	compatible = "socionext,ph1-sld8-ref", "socionext,ph1-sld8";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serialsc;
+	};
+
+	aliases {
+		serial0 = &serialsc;
+	};
+};
+
+&extbus {
+	ranges = <0 0x00000000 0x0f000000 0x01000000
+		  1 0x00000000 0x00000000 0x08000000>;
+};
+
+&support_card {
+	ranges = <0x00000000 1 0x03f00000 0x00100000>;
+};
+
+&serialsc {
+	interrupts = <0 48 4>;
+};
diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
new file mode 100644
index 000000000000..baa71e1febb8
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi
@@ -0,0 +1,110 @@
+/*
+ * Device Tree Source for UniPhier PH1-sLD8 SoC
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "socionext,ph1-sld8";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+	};
+
+	clocks {
+		arm_timer_clk: arm_timer_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <50000000>;
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		interrupt-parent = <&intc>;
+
+		extbus: extbus {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <1>;
+		};
+
+		system-bus-controller-misc@59800000 {
+			compatible = "socionext,uniphier-system-bus-controller-misc",
+				     "syscon";
+			reg = <0x59800000 0x2000>;
+		};
+
+		timer@60000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x60000200 0x20>;
+			interrupts = <1 11 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		timer@60000600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x60000600 0x20>;
+			interrupts = <1 13 0x104>;
+			clocks = <&arm_timer_clk>;
+		};
+
+		intc: interrupt-controller@60001000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x60001000 0x1000>,
+			      <0x60000100 0x100>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/uniphier-support-card.dtsi b/arch/arm/boot/dts/uniphier-support-card.dtsi
new file mode 100644
index 000000000000..da271e3b922a
--- /dev/null
+++ b/arch/arm/boot/dts/uniphier-support-card.dtsi
@@ -0,0 +1,65 @@
+/*
+ * Device Tree Source for UniPhier Support Card (Expansion Board)
+ *
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&extbus {
+	support_card: support_card {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ethsc: ethernet@00000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x00000000 0x1000>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+		};
+
+		serialsc: uart@000b0000 {
+			compatible = "ns16550a";
+			reg = <0x000b0000 0x20>;
+			clock-frequency = <12288000>;
+			reg-shift = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi
index fbef0828e930..68ca125b56ea 100644
--- a/arch/arm/boot/dts/vf-colibri.dtsi
+++ b/arch/arm/boot/dts/vf-colibri.dtsi
@@ -140,7 +140,7 @@
 				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
 				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
 				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
 				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
 				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
 				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts
index fd8758b639f5..5447f2594659 100644
--- a/arch/arm/boot/dts/vf610-cosmic.dts
+++ b/arch/arm/boot/dts/vf610-cosmic.dts
@@ -68,7 +68,7 @@
 				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
 				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
 				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
 				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
 				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
 				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
diff --git a/arch/arm/boot/dts/vf610-pinfunc.h b/arch/arm/boot/dts/vf610-pinfunc.h
index 1ee681f7ce2f..fcad7132c871 100644
--- a/arch/arm/boot/dts/vf610-pinfunc.h
+++ b/arch/arm/boot/dts/vf610-pinfunc.h
@@ -369,7 +369,7 @@
 #define VF610_PAD_PTC11__MLB_DATA		0x0E0 0x358 ALT6 0x1
 #define VF610_PAD_PTC11__DEBUG_OUT		0x0E0 0x000 ALT7 0x0
 #define VF610_PAD_PTC12__GPIO_57		0x0E4 0x000 ALT0 0x0
-#define VF610_PAD_PTC12__ENET_RMII_RXD1		0x0E4 0x000 ALT1 0x0
+#define VF610_PAD_PTC12__ENET_RMII1_RXD1	0x0E4 0x000 ALT1 0x0
 #define VF610_PAD_PTC12__ESAI_SDO1		0x0E4 0x318 ALT3 0x1
 #define VF610_PAD_PTC12__SAI2_TX_BCLK		0x0E4 0x370 ALT5 0x1
 #define VF610_PAD_PTC12__DEBUG_OUT3		0x0E4 0x000 ALT7 0x0
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index f64fddce3e2a..375ab23ca743 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -221,7 +221,7 @@
 				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
 				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
 				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
-				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC12__ENET_RMII1_RXD1	0x30d1
 				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
 				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
 				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
new file mode 100644
index 000000000000..2931a80caccb
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -0,0 +1,99 @@
+/*
+ * Device tree for Colibri VF61 Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "vf610m4.dtsi"
+
+/ {
+	model = "VF610 Cortex-M4";
+	compatible = "fsl,vf610m4";
+
+	chosen {
+		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
+		linux,stdout-path = "&uart2";
+	};
+
+	memory {
+		reg = <0x8c000000 0x3000000>;
+	};
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&gpio3 {
+	status = "disabled";
+};
+
+&gpio4 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/vf610m4.dtsi b/arch/arm/boot/dts/vf610m4.dtsi
new file mode 100644
index 000000000000..9ffe2eb68ed4
--- /dev/null
+++ b/arch/arm/boot/dts/vf610m4.dtsi
@@ -0,0 +1,50 @@
+/*
+ * Device tree for VF6xx Cortex-M4 support
+ *
+ * Copyright (C) 2015 Stefan Agner
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "armv7-m.dtsi"
+#include "vfxxx.dtsi"
+
+&mscm_ir {
+	interrupt-parent = <&nvic>;
+};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 9ea54b3dba09..06915080b875 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -193,7 +193,7 @@
 		};
 
 		gem0: ethernet@e000b000 {
-			compatible = "cdns,zynq-gem";
+			compatible = "cdns,zynq-gem", "cdns,gem";
 			reg = <0xe000b000 0x1000>;
 			status = "disabled";
 			interrupts = <0 22 4>;
@@ -204,7 +204,7 @@
 		};
 
 		gem1: ethernet@e000c000 {
-			compatible = "cdns,zynq-gem";
+			compatible = "cdns,zynq-gem", "cdns,gem";
 			reg = <0xe000c000 0x1000>;
 			status = "disabled";
 			interrupts = <0 45 4>;
diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts
index 174571232ea5..9efd16cb2859 100644
--- a/arch/arm/boot/dts/zynq-parallella.dts
+++ b/arch/arm/boot/dts/zynq-parallella.dts
@@ -23,14 +23,19 @@
 	model = "Adapteva Parallella Board";
 	compatible = "adapteva,parallella", "xlnx,zynq-7000";
 
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x40000000>;
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
-		linux,stdout-path = "/amba/serial@e0001000";
+		bootargs = "earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait";
+		stdout-path = "serial0:115200n8";
 	};
 };
 
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 1fc1d3911e9b..fb59d34e8ee6 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -30,7 +30,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	leds {
diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts
index 850518d9b8ac..abf5d238ae04 100644
--- a/arch/arm/boot/dts/zynq-zc706.dts
+++ b/arch/arm/boot/dts/zynq-zc706.dts
@@ -30,7 +30,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	usb_phy0: phy0 {
diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts
index 5658bc8434de..b9f2522012e8 100644
--- a/arch/arm/boot/dts/zynq-zed.dts
+++ b/arch/arm/boot/dts/zynq-zed.dts
@@ -29,7 +29,8 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	usb_phy0: phy0 {
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index a9a12ce5023b..16c9cacd668d 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -18,13 +18,19 @@
 	model = "Zynq ZYBO Development Board";
 	compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
 
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x0 0x20000000>;
 	};
 
 	chosen {
-		bootargs = "console=ttyPS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 };
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index af95a624fe71..f008930277ed 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -112,6 +112,7 @@ struct omap3_control_regs {
 	u32 csirxfe;
 	u32 iva2_bootaddr;
 	u32 iva2_bootmod;
+	u32 wkup_ctrl;
 	u32 debobs_0;
 	u32 debobs_1;
 	u32 debobs_2;
@@ -455,6 +456,7 @@ void omap3_control_save_context(void)
 			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
 	control_context.iva2_bootmod =
 			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+	control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
 	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
 	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
 	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
@@ -512,6 +514,7 @@ void omap3_control_restore_context(void)
 					OMAP343X_CONTROL_IVA2_BOOTADDR);
 	omap_ctrl_writel(control_context.iva2_bootmod,
 					OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL);
 	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
 	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
 	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 80d2b7d8e36e..ec406bc2c6d4 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -231,6 +231,9 @@
 #define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
 
 /* 34xx GENERAL_WKUP register offsets */
+#define OMAP34XX_CONTROL_WKUP_CTRL	(OMAP343X_CONTROL_GENERAL_WKUP - 0x4)
+#define OMAP36XX_GPIO_IO_PWRDNZ		BIT(6)
+
 #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
 						0x008 + (i))
 #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index af11511dda50..821171cf6b7d 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -44,6 +44,27 @@ static void __init omap2420_n8x0_legacy_init(void)
 #endif
 
 #ifdef CONFIG_ARCH_OMAP3
+/*
+ * Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
+ * mode for MMC1 in case bootloader did not configure things.
+ * Note that if the pins are used for MMC1, pbias-regulator
+ * manages the IO voltage.
+ */
+static void __init omap3_gpio126_127_129(void)
+{
+	u32 reg;
+
+	reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+	reg &= ~OMAP343X_PBIASLITEVMODE1;
+	reg |= OMAP343X_PBIASLITEPWRDNZ1;
+	omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
+	if (cpu_is_omap3630()) {
+		reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
+		reg |= OMAP36XX_GPIO_IO_PWRDNZ;
+		omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
+	}
+}
+
 static void __init hsmmc2_internal_input_clk(void)
 {
 	u32 reg;
@@ -356,6 +377,7 @@ static struct pdata_init pdata_quirks[] __initdata = {
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
 	{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
+	{ "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
 	{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
 	{ "ti,am3517-evm", am3517_evm_legacy_init, },
 	{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index 3b1ac463a494..125865daaf17 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -1,6 +1,7 @@
 menuconfig ARCH_STI
 	bool "STMicroelectronics Consumer Electronics SOCs" if ARCH_MULTI_V7
 	select ARM_GIC
+	select ST_IRQCHIP
 	select ARM_GLOBAL_TIMER
 	select PINCTRL
 	select PINCTRL_ST