Merge tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Too many fixes have accumulated in the soc tree, so this is a fairly
  large set. As usual, most of the fixes are for devicetree files, but
  there are also notable code changes for imx and omap regressions as
  well as some maintainer file updates.

  imx:
   - Fix an Ethernet issue on imx6ul-14x14-evk board that is caused by
     independent PHY reset.

   - Add missing `dma-coherent` property for LayerScape device trees to
     fix a kernel BUG report.

   - Use IRQCHIP_DECLARE for AVIC driver to fix a boot issue on i.MX25
     with fw_devlink=on.

   - Add missing I2C pinctrl entry for imx8mp-phyboard-pollux-rdk board
     to fix the broken I2C GPIO recovery support.

   - Add `fsl,use-minimum-ecc` property for imx6ull-myir-mys-6ulx-eval
     device tree to fix UBI filesystem mount failure.

  at91:
   - wrong phy address that blocks Ethernet use on boards with sama5d27
     SoM1

   - restrictive pin possibilities for sam9x60

  omap:
   - Fix ocp interconnect bus access error reporting for omap_l3_noc by
     setting IRQF_NO_THREAD

   - Fix changed mmc slot order regression by adding mmc aliases for
     am335x

   - Fix dra7 reboot regression caused by invalid pcie reset map

   - Fix smartreflex init regression caused by dropped legacy data

   - Fix ti-sysc driver warning on unbind if reset is not deasserted

   - Fix flakey reset deassert for dra7 iva

  stm32:
   - MAINTAINER file updates

  broadcom:
   - brcmstb SoC ID build fix

   - MAINTAINER file updates"

* tag 'soc-fixes-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: Add Alain Volmat as STM32 I2C/SMBUS maintainer
  MAINTAINERS: Remove Vincent Abriou for STM/STI DRM drivers.
  MAINTAINERS: Update some st.com email addresses to foss.st.com
  ARM: dts: imx6ull: fix ubi filesystem mount failed
  ARM: imx6ul-14x14-evk: Do not reset the Ethernet PHYs independently
  arm64: dts: imx8mp-phyboard-pollux-rdk: Add missing pinctrl entry
  arm64: dts: ls1012a: mark crypto engine dma coherent
  arm64: dts: ls1043a: mark crypto engine dma coherent
  arm64: dts: ls1046a: mark crypto engine dma coherent
  ARM: imx: avic: Convert to using IRQCHIP_DECLARE
  ARM: dts: at91: sam9x60: fix mux-mask to match product's datasheet
  ARM: dts: at91: sam9x60: fix mux-mask for PA7 so it can be set to A, B and C
  ARM: dts: at91-sama5d27_som1: fix phy address to 7
  soc: ti: omap-prm: Fix occasional abort on reset deassert for dra7 iva
  bus: ti-sysc: Fix warning on unbind if reset is not deasserted
  ARM: OMAP2+: Fix smartreflex init regression after dropping legacy data
  soc: ti: omap-prm: Fix reboot issue with invalid pcie reset map for dra7
  MAINTAINERS: rectify BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
  ARM: dts: am33xx: add aliases for mmc interfaces
  bus: omap_l3_noc: mark l3 irqs as IRQF_NO_THREAD

15 files changed, 104 insertions, 96 deletions

diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 5b213a1e68bb..5e33d0e88f5b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,9 @@
 		ethernet1 = &cpsw_emac1;
 		spi0 = &spi0;
 		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index 73b6b1f89de9..775ceb3acb6c 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -334,14 +334,6 @@
 };
 
 &pinctrl {
-	atmel,mux-mask = <
-			 /*	A	B	C	*/
-			 0xFFFFFE7F 0xC0E0397F 0xEF00019D	/* pioA */
-			 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
-			 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
-			 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
-			 >;
-
 	adc {
 		pinctrl_adc_default: adc_default {
 			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 1b1163858b1d..e3251f3e3eaa 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -84,8 +84,8 @@
 				pinctrl-0 = <&pinctrl_macb0_default>;
 				phy-mode = "rmii";
 
-				ethernet-phy@0 {
-					reg = <0x0>;
+				ethernet-phy@7 {
+					reg = <0x7>;
 					interrupt-parent = <&pioA>;
 					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
 					pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index c593597b2119..5a1e10def6ef 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -210,9 +210,6 @@
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			clock-names = "rmii-ref";
-			reset-gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <100>;
 
 		};
 
@@ -222,9 +219,6 @@
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 			clock-names = "rmii-ref";
-			reset-gpios = <&gpio_spi 2 GPIO_ACTIVE_LOW>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <100>;
 		};
 	};
 };
@@ -243,6 +237,22 @@
 	status = "okay";
 };
 
+&gpio_spi {
+	eth0-phy-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth0-phy";
+	};
+
+	eth1-phy-hog {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "eth1-phy";
+	};
+};
+
 &i2c1 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
index ecbb2cc5b9ab..79cc45728cd2 100644
--- a/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
+++ b/arch/arm/boot/dts/imx6ull-myir-mys-6ulx-eval.dts
@@ -14,5 +14,6 @@
 };
 
 &gpmi {
+	fsl,use-minimum-ecc;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
index 84066c1298df..ec45ced3cde6 100644
--- a/arch/arm/boot/dts/sam9x60.dtsi
+++ b/arch/arm/boot/dts/sam9x60.dtsi
@@ -606,6 +606,15 @@
 				compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
 				ranges = <0xfffff400 0xfffff400 0x800>;
 
+				/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
+				atmel,mux-mask = <
+						 /*	A	B	C	*/
+						 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
+						 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
+						 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
+						 0x003fffff 0x003f8000 0x00000000	/* pioD */
+						 >;
+
 				pioA: gpio@fffff400 {
 					compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
diff --git a/arch/arm/mach-imx/avic.c b/arch/arm/mach-imx/avic.c
index 322caa21bcb3..21bce4049cec 100644
--- a/arch/arm/mach-imx/avic.c
+++ b/arch/arm/mach-imx/avic.c
@@ -7,6 +7,7 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -162,7 +163,7 @@ static void __exception_irq_entry avic_handle_irq(struct pt_regs *regs)
  * interrupts. It registers the interrupt enable and disable functions
  * to the kernel for each interrupt source.
  */
-void __init mxc_init_irq(void __iomem *irqbase)
+static void __init mxc_init_irq(void __iomem *irqbase)
 {
 	struct device_node *np;
 	int irq_base;
@@ -220,3 +221,16 @@ void __init mxc_init_irq(void __iomem *irqbase)
 
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }
+
+static int __init imx_avic_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	void __iomem *avic_base;
+
+	avic_base = of_iomap(node, 0);
+	BUG_ON(!avic_base);
+	mxc_init_irq(avic_base);
+	return 0;
+}
+
+IRQCHIP_DECLARE(imx_avic, "fsl,avic", imx_avic_init);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 2b004cc4f95e..474dedb73bc7 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -22,7 +22,6 @@ void mx35_map_io(void);
 void imx21_init_early(void);
 void imx31_init_early(void);
 void imx35_init_early(void);
-void mxc_init_irq(void __iomem *);
 void mx31_init_irq(void);
 void mx35_init_irq(void);
 void mxc_set_cpu_type(unsigned int type);
diff --git a/arch/arm/mach-imx/mach-imx1.c b/arch/arm/mach-imx/mach-imx1.c
index 32df3b8012f9..8eca92d66a2e 100644
--- a/arch/arm/mach-imx/mach-imx1.c
+++ b/arch/arm/mach-imx/mach-imx1.c
@@ -17,16 +17,6 @@ static void __init imx1_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX1);
 }
 
-static void __init imx1_init_irq(void)
-{
-	void __iomem *avic_addr;
-
-	avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K);
-	WARN_ON(!avic_addr);
-
-	mxc_init_irq(avic_addr);
-}
-
 static const char * const imx1_dt_board_compat[] __initconst = {
 	"fsl,imx1",
 	NULL
@@ -34,7 +24,6 @@ static const char * const imx1_dt_board_compat[] __initconst = {
 
 DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)")
 	.init_early	= imx1_init_early,
-	.init_irq	= imx1_init_irq,
 	.dt_compat	= imx1_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx25.c b/arch/arm/mach-imx/mach-imx25.c
index 95de48a1aa7d..51927bd08aef 100644
--- a/arch/arm/mach-imx/mach-imx25.c
+++ b/arch/arm/mach-imx/mach-imx25.c
@@ -22,17 +22,6 @@ static void __init imx25_dt_init(void)
 	imx_aips_allow_unprivileged_access("fsl,imx25-aips");
 }
 
-static void __init mx25_init_irq(void)
-{
-	struct device_node *np;
-	void __iomem *avic_base;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-	mxc_init_irq(avic_base);
-}
-
 static const char * const imx25_dt_board_compat[] __initconst = {
 	"fsl,imx25",
 	NULL
@@ -42,6 +31,5 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
 	.init_early	= imx25_init_early,
 	.init_machine	= imx25_dt_init,
 	.init_late      = imx25_pm_init,
-	.init_irq	= mx25_init_irq,
 	.dt_compat	= imx25_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27.c b/arch/arm/mach-imx/mach-imx27.c
index 262422a9c196..e325c9468105 100644
--- a/arch/arm/mach-imx/mach-imx27.c
+++ b/arch/arm/mach-imx/mach-imx27.c
@@ -56,17 +56,6 @@ static void __init imx27_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX27);
 }
 
-static void __init mx27_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-	mxc_init_irq(avic_base);
-}
-
 static const char * const imx27_dt_board_compat[] __initconst = {
 	"fsl,imx27",
 	NULL
@@ -75,7 +64,6 @@ static const char * const imx27_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
 	.map_io		= mx27_map_io,
 	.init_early	= imx27_init_early,
-	.init_irq	= mx27_init_irq,
 	.init_late	= imx27_pm_init,
 	.dt_compat	= imx27_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx31.c b/arch/arm/mach-imx/mach-imx31.c
index dc69dfe600df..e9a1092b6093 100644
--- a/arch/arm/mach-imx/mach-imx31.c
+++ b/arch/arm/mach-imx/mach-imx31.c
@@ -14,6 +14,5 @@ static const char * const imx31_dt_board_compat[] __initconst = {
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
 	.map_io		= mx31_map_io,
 	.init_early	= imx31_init_early,
-	.init_irq	= mx31_init_irq,
 	.dt_compat	= imx31_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx35.c b/arch/arm/mach-imx/mach-imx35.c
index ec5c3068715c..0fc08218b77d 100644
--- a/arch/arm/mach-imx/mach-imx35.c
+++ b/arch/arm/mach-imx/mach-imx35.c
@@ -27,6 +27,5 @@ DT_MACHINE_START(IMX35_DT, "Freescale i.MX35 (Device Tree Support)")
 	.l2c_aux_mask	= ~0,
 	.map_io		= mx35_map_io,
 	.init_early	= imx35_init_early,
-	.init_irq	= mx35_init_irq,
 	.dt_compat	= imx35_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 5056438e5b42..28db97289ee8 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -109,18 +109,6 @@ void __init imx31_init_early(void)
 	mx3_ccm_base = of_iomap(np, 0);
 	BUG_ON(!mx3_ccm_base);
 }
-
-void __init mx31_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx31-avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-
-	mxc_init_irq(avic_base);
-}
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
@@ -158,16 +146,4 @@ void __init imx35_init_early(void)
 	mx3_ccm_base = of_iomap(np, 0);
 	BUG_ON(!mx3_ccm_base);
 }
-
-void __init mx35_init_irq(void)
-{
-	void __iomem *avic_base;
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx35-avic");
-	avic_base = of_iomap(np, 0);
-	BUG_ON(!avic_base);
-
-	mxc_init_irq(avic_base);
-}
 #endif /* ifdef CONFIG_SOC_IMX35 */
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index 62df666c2bd0..17b66f0d0dee 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -88,34 +88,26 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 
 extern struct omap_sr_data omap_sr_pdata[];
 
-static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_init_by_name(const char *name, const char *voltdm)
 {
 	struct omap_sr_data *sr_data = NULL;
 	struct omap_volt_data *volt_data;
-	struct omap_smartreflex_dev_attr *sr_dev_attr;
 	static int i;
 
-	if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
-	    !strncmp(oh->name, "smartreflex_mpu", 16))
+	if (!strncmp(name, "smartreflex_mpu_iva", 20) ||
+	    !strncmp(name, "smartreflex_mpu", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_MPU];
-	else if (!strncmp(oh->name, "smartreflex_core", 17))
+	else if (!strncmp(name, "smartreflex_core", 17))
 		sr_data = &omap_sr_pdata[OMAP_SR_CORE];
-	else if (!strncmp(oh->name, "smartreflex_iva", 16))
+	else if (!strncmp(name, "smartreflex_iva", 16))
 		sr_data = &omap_sr_pdata[OMAP_SR_IVA];
 
 	if (!sr_data) {
-		pr_err("%s: Unknown instance %s\n", __func__, oh->name);
+		pr_err("%s: Unknown instance %s\n", __func__, name);
 		return -EINVAL;
 	}
 
-	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
-	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
-		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
-		       __func__, oh->name);
-		goto exit;
-	}
-
-	sr_data->name = oh->name;
+	sr_data->name = name;
 	if (cpu_is_omap343x())
 		sr_data->ip_type = 1;
 	else
@@ -136,10 +128,10 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		}
 	}
 
-	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
+	sr_data->voltdm = voltdm_lookup(voltdm);
 	if (!sr_data->voltdm) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
-			__func__, sr_dev_attr->sensor_voltdm_name);
+			__func__, voltdm);
 		goto exit;
 	}
 
@@ -160,6 +152,20 @@ exit:
 	return 0;
 }
 
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
+{
+	struct omap_smartreflex_dev_attr *sr_dev_attr;
+
+	sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
+	if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
+		pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
+		       __func__, oh->name);
+		return 0;
+	}
+
+	return sr_init_by_name(oh->name, sr_dev_attr->sensor_voltdm_name);
+}
+
 /*
  * API to be called from board files to enable smartreflex
  * autocompensation at init.
@@ -169,7 +175,42 @@ void __init omap_enable_smartreflex_on_init(void)
 	sr_enable_on_init = true;
 }
 
+static const char * const omap4_sr_instances[] = {
+	"mpu",
+	"iva",
+	"core",
+};
+
+static const char * const dra7_sr_instances[] = {
+	"mpu",
+	"core",
+};
+
 int __init omap_devinit_smartreflex(void)
 {
+	const char * const *sr_inst;
+	int i, nr_sr = 0;
+
+	if (soc_is_omap44xx()) {
+		sr_inst = omap4_sr_instances;
+		nr_sr = ARRAY_SIZE(omap4_sr_instances);
+
+	} else if (soc_is_dra7xx()) {
+		sr_inst = dra7_sr_instances;
+		nr_sr = ARRAY_SIZE(dra7_sr_instances);
+	}
+
+	if (nr_sr) {
+		const char *name, *voltdm;
+
+		for (i = 0; i < nr_sr; i++) {
+			name = kasprintf(GFP_KERNEL, "smartreflex_%s", sr_inst[i]);
+			voltdm = sr_inst[i];
+			sr_init_by_name(name, voltdm);
+		}
+
+		return 0;
+	}
+
 	return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
 }