Merge tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm32 device tree changes for 5.4: - New board support: ZII i.MX7 RMU2, Kontron i.MX6UL N6310, and PHYTEC phyBOARD-Segin based on i.MX6ULL. - A series from Andrey Smirnov to update vf610-zii boards on I2C pinmux, switch watchdog, GPIO expander IRQ. - Move GIC node into soc node for i.MX6 SoCs. - Add OV5645 camera support for imx6qdl-wandboard board. - Drop unneeded snvs_pwrkey node for imx7d-zii-rpu2 and imx7-colibri. - Use simple-mfd instead of simple-bus for i.MX6 ANATOP. - Move the native-mode property inside the display-timings node for various i.MX25 and i.MX27 boards. - Add EDMA devices for i.MX7ULP SoC. - A series from Stefan Riedmueller to update imx6ul-phytec-segin board on various devices. - Use OF graph to describe the display for opos6uldev board. - Misc random updates on i.MX7/6 boards. * tag 'imx-dt-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (53 commits) ARM: dts: vf610-zii-scu4-aib: Configure IRQ line for GPIO expander ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards ARM: dts: vf610-zii-cfu1: Slow I2C0 down to 100 kHz ARM: dts: pbab01: correct rtc vendor ARM: vf610-zii-cfu1: Add node for switch watchdog ARM: dts: imx6: drop gpmi-nand address and size cells ARM: dts: imx6: replace simple-bus by simple-mfd for anatop ARM: dts: imx6qdl-colibri: add phy to fec ARM: dts: imx7-colibri: add recovery for I2C for iMX7 ARM: dts: imx7-colibri: Add sleep pinctrl to ethernet ARM: dts: imx7-colibri: prepare module device tree for FlexCAN ARM: dts: imx7-colibri: disable HS400 ARM: dts: imx7-colibri: make sure module supplies are always on ARM: dts: imx7d: cl-som-imx7: add compatible for phy ARM: dts: imx7d: cl-som-imx7: make ethernet work again ARM: dts: imx6ul: Add csi node ARM: dts: imx25: mbimxsd25: native-mode is part of display-timings ARM: dts: apf27dev: native-mode is part of display-timings ARM: dts: edb7211: native-mode is part of display-timings ARM: dts: imx27-phytec-phycore-rdk: native-mode is part of display-timings ... Link: https://lore.kernel.org/r/20190825153237.28829-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
author: Arnd Bergmann <arnd@arndb.de> 2019-09-03 17:08:40 +0300
committer: Arnd Bergmann <arnd@arndb.de> 2019-09-03 17:08:41 +0300
commit: a0a4c25fba92d570f3256495328787ee30c3b044 (patch)
tree: d99478e1e0b8d442e7e894842e92996966691286 /arch/arm
parent: 89e4acf7a382a30425dc4fc0ac41798c9a810c09 (diff)
parent: b04f537caab4deae1b839438e8fd5ed4bc598b43 (diff)
download: linux-a0a4c25fba92d570f3256495328787ee30c3b044.tar.xz
44 files changed, 1741 insertions, 183 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a6373026a154..e10d9e998c23 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -569,17 +569,22 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
 	imx6ul-geam.dtb \
 	imx6ul-isiot-emmc.dtb \
 	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-n6310-s.dtb \
+	imx6ul-kontron-n6310-s-43.dtb \
 	imx6ul-liteboard.dtb \
 	imx6ul-opos6uldev.dtb \
 	imx6ul-pico-hobbit.dtb \
 	imx6ul-pico-pi.dtb \
-	imx6ul-phytec-phyboard-segin-full.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
 	imx6ul-tx6ul-0010.dtb \
 	imx6ul-tx6ul-0011.dtb \
 	imx6ul-tx6ul-mainboard.dtb \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri-eval-v3.dtb \
 	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-phytec-segin-ff-rdk-nand.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-phytec-segin-lc-rdk-nand.dtb \
 	imx6ulz-14x14-evk.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-cl-som-imx7.dtb \
@@ -594,6 +599,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-sdb.dtb \
 	imx7d-sdb-reva.dtb \
 	imx7d-sdb-sht11.dtb \
+	imx7d-zii-rmu2.dtb \
 	imx7d-zii-rpu2.dtb \
 	imx7s-colibri-eval-v3.dtb \
 	imx7s-mba7.dtb \
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
index a0c270f63fee..da076479c8e2 100644
--- a/arch/arm/boot/dts/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -25,11 +25,11 @@
 
 	display: display {
 		model = "320x240x4";
-		native-mode = <&timing0>;
 		bits-per-pixel = <4>;
 		ac-prescale = <17>;
 
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 320x240 {
 				hactive = <320>;
 				hback-porch = <0>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index dbecd6d2cfc4..7d4301b22b90 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -14,8 +14,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xcad08b80>;
 		bus-width = <18>;
-		native-mode = <&qvga_timings>;
 		display-timings {
+			native-mode = <&qvga_timings>;
 			qvga_timings: 320x240 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index ad2f7e879831..80a7f96de4c6 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -14,8 +14,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&dvi_svga_timings>;
 		display-timings {
+			native-mode = <&dvi_svga_timings>;
 			dvi_svga_timings: 800x600 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index d60d8f464ca9..24027a1fb46d 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -14,8 +14,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&dvi_vga_timings>;
 		display-timings {
+			native-mode = <&dvi_vga_timings>;
 			dvi_vga_timings: 640x480 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index f8544a9e4633..05cccd12624c 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -76,8 +76,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&wvga_timings>;
 		display-timings {
+			native-mode = <&wvga_timings>;
 			wvga_timings: 640x480 {
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index 087c6e237af0..6f1e8ce9e76e 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -12,10 +12,10 @@
 
 	display: display {
 		model = "Chimei-LW700AT9003";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;  /* non-standard but required */
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 800x480 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
index 84fc8df4be7c..9c3ec82ec7e5 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -11,11 +11,11 @@
 
 	display0: CMO-QVGA {
 		model = "CMO-QVGA";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfad08b80>;
 
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 320x240 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 5e5e282ed30e..0cd75dadf292 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -15,10 +15,10 @@
 
 	display: display {
 		model = "Primeview-PD050VL1";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;  /* non-standard but required */
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 640x480 {
 				hactive = <640>;
 				vactive = <480>;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 5606f417e9e8..bf883e45576a 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -14,11 +14,11 @@
 
 	display0: LQ035Q7 {
 		model = "Sharp-LQ035Q7";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xf00080c0>;
 
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 240x320 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index 10acc5331ba6..719ed5ca454a 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -54,7 +54,8 @@
 	};
 
 	panel {
-		compatible = "edt,etm070080dh6";
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 1beac22266ed..019dda6b88ad 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -140,7 +140,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index 7a85116ef1d2..2418cf8f2317 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -556,8 +556,6 @@
 	non-removable;
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&reg_wlan_vmmc>;
-	vqmmc-1-8-v;
-	ocr-limit = <0x180>;     /* 1.65v - 2.1v */
 	cap-power-off-card;
 	keep-power-in-suspend;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index 82802f8ce7a0..d434868e870a 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -128,7 +128,7 @@
 	};
 
 	rtc@51 {
-		compatible = "nxp,rtc8564";
+		compatible = "epson,rtc8564";
 		reg = <0x51>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index 50d9a989e06a..2cfb4112a467 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -33,6 +33,30 @@
 		spdif-out;
 	};
 
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
 	reg_2p5v: regulator-2p5v {
 		compatible = "regulator-fixed";
 		regulator-name = "2P5V";
@@ -94,6 +118,29 @@
 		VDDIO-supply = <&reg_3p3v>;
 		lrclk-strength = <3>;
 	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
 };
 
 &iomuxc {
@@ -128,7 +175,6 @@
 				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
@@ -152,6 +198,14 @@
 			>;
 		};
 
+		pinctrl_ov5645: ov5645grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			>;
+		};
+
 		pinctrl_spdif: spdifgrp {
 			fsl,pins = <
 				MX6QDL_PAD_ENET_RXD0__SPDIF_OUT		0x1b0b0
@@ -226,12 +280,23 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spdif>;
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 4b801935cad1..e6b4b8525f98 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -171,8 +171,6 @@
 
 		gpmi: gpmi-nand@112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
 			reg = <0x00112000 0x2000>, <0x00114000 0x2000>;
 			reg-names = "gpmi-nand", "bch";
 			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
@@ -695,7 +693,7 @@
 			};
 
 			anatop: anatop@20c8000 {
-				compatible = "fsl,imx6q-anatop", "syscon", "simple-bus";
+				compatible = "fsl,imx6q-anatop", "syscon", "simple-mfd";
 				reg = <0x020c8000 0x1000>;
 				interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>,
 					     <0 54 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index b36fc012ff06..3a96b5538a2a 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -77,15 +77,6 @@
 		};
 	};
 
-	intc: interrupt-controller@a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-		interrupt-parent = <&intc>;
-	};
-
 	clocks {
 		ckil {
 			compatible = "fixed-clock";
@@ -133,6 +124,15 @@
 			clocks = <&clks IMX6SL_CLK_OCRAM>;
 		};
 
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
 		L2: l2-cache@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index b0a77ff70b67..13c7ba7fa6bc 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -75,15 +75,6 @@
 		};
 	};
 
-	intc: interrupt-controller@a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-		interrupt-parent = <&intc>;
-	};
-
 	ckil: clock-ckil {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -134,6 +125,15 @@
 			reg = <0x00900000 0x20000>;
 		};
 
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
 		L2: l2-cache@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
@@ -234,7 +234,7 @@
 					compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart",
 						     "fsl,imx21-uart";
 					reg = <0x02018000 0x4000>;
-					interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+					interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
 					dma-names = "rx", "tx";
 					clocks = <&clks IMX6SLL_CLK_UART4_IPG>,
@@ -621,7 +621,7 @@
 			};
 
 			sdma: dma-controller@20ec000 {
-				compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma";
+				compatible = "fsl,imx6sll-sdma", "fsl,imx6ul-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_IPG>,
@@ -801,7 +801,7 @@
 				compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart",
 					     "fsl,imx21-uart";
 				reg = <0x021f4000 0x4000>;
-				interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 				dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
 				dma-names = "rx", "tx";
 				clocks = <&clks IMX6SLL_CLK_UART5_IPG>,
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index bb25add90f19..531a52c1e987 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -90,15 +90,6 @@
 		};
 	};
 
-	intc: interrupt-controller@a01000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a00100 0x100>;
-		interrupt-parent = <&intc>;
-	};
-
 	ckil: clock-ckil {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -181,6 +172,15 @@
 			clocks = <&clks IMX6SX_CLK_OCRAM>;
 		};
 
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a00100 0x100>;
+			interrupt-parent = <&intc>;
+		};
+
 		L2: l2-cache@a02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a02000 0x1000>;
@@ -926,8 +926,8 @@
 					 <&clks IMX6SX_CLK_ENET_PTP>;
 				clock-names = "ipg", "ahb", "ptp",
 					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
new file mode 100644
index 000000000000..5bad29683cc3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s-43.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul-kontron-n6310-s.dts"
+
+/ {
+	model = "Kontron N6310 S 43";
+	compatible = "kontron,imx6ul-n6310-s-43", "kontron,imx6ul-n6310-s",
+		     "kontron,imx6ul-n6310-som", "fsl,imx6ul";
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm7 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+};
+
+&i2c4 {
+	touchscreen@5d {
+		compatible = "goodix,gt928";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cap_touch>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		irq-gpios = <&gpio5 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
+	/* Leave status disabled because of missing display panel node */
+};
+
+&pwm7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm7>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_cap_touch: captouchgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0 /* Touch Interrupt */
+			MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0 /* Touch Reset */
+			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x1b0b0 /* Touch Wake */
+		>;
+	};
+
+	pinctrl_lcdif_ctrl: lcdifctrlgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_CLK__LCDIF_CLK		0x79
+			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE	0x79
+			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC	0x79
+			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC	0x79
+			MX6UL_PAD_LCD_RESET__LCDIF_RESET	0x79
+		>;
+	};
+
+	pinctrl_lcdif_dat: lcdifdatgrp {
+		fsl,pins = <
+			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00	0x79
+			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01	0x79
+			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02	0x79
+			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03	0x79
+			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04	0x79
+			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05	0x79
+			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06	0x79
+			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07	0x79
+			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08	0x79
+			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09	0x79
+			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10	0x79
+			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11	0x79
+			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12	0x79
+			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13	0x79
+			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14	0x79
+			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15	0x79
+			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16	0x79
+			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17	0x79
+			MX6UL_PAD_LCD_DATA18__LCDIF_DATA18	0x79
+			MX6UL_PAD_LCD_DATA19__LCDIF_DATA19	0x79
+			MX6UL_PAD_LCD_DATA20__LCDIF_DATA20	0x79
+			MX6UL_PAD_LCD_DATA21__LCDIF_DATA21	0x79
+			MX6UL_PAD_LCD_DATA22__LCDIF_DATA22	0x79
+			MX6UL_PAD_LCD_DATA23__LCDIF_DATA23	0x79
+		>;
+	};
+
+	pinctrl_pwm7: pwm7grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_VSYNC__PWM7_OUT		0x110b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
new file mode 100644
index 000000000000..0205fd56d975
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
@@ -0,0 +1,420 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+/dts-v1/;
+
+#include "imx6ul-kontron-n6310-som.dtsi"
+
+/ {
+	model = "Kontron N6310 S";
+	compatible = "kontron,imx6ul-n6310-s", "kontron,imx6ul-n6310-som",
+		     "fsl,imx6ul";
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "debug-led1";
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "debug-led2";
+			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "debug-led3";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	pwm-beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm8 0 5000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_adc: regulator-vref-adc {
+		compatible = "regulator-fixed";
+		regulator-name = "vref-adc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&adc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc1>;
+	num-channels = <3>;
+	vref-supply = <&reg_vref_adc>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	eeprom@0 {
+		compatible = "anvo,anv32e61w", "atmel,at25";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		spi-cpha;
+		spi-cpol;
+		pagesize = <1>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&fec1 {
+	pinctrl-0 = <&pinctrl_enet1>;
+	/delete-node/ mdio;
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2 &pinctrl_enet2_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy2>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&pwm8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm8>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	rs485-rts-active-low;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	vbus-supply = <&reg_usb_otg1_vbus>;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3v3>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
+
+	pinctrl_adc1: adc1grp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0xb0
+			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03	0xb0
+			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0xb0
+		>;
+	};
+
+	/* FRAM */
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x100b1
+			MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x100b1
+			MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK	0x100b1
+			MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x100b1	/* ECSPI1-CS1 */
+		>;
+	};
+
+	pinctrl_enet2: enet2grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b009
+		>;
+	};
+
+	pinctrl_enet2_mdio: enet2mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET2_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp{
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x1b020
+			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x1b020
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x1b0b0 /* DOUT1 */
+			MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x1b0b0 /* DIN1 */
+			MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x1b0b0 /* DOUT2 */
+			MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x1b0b0 /* DIN2 */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30	0x1b0b0	/* LED H14 */
+			MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x1b0b0	/* LED H15 */
+			MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0	/* LED H16 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_TX_DATA__I2C4_SCL	0x4001f8b0
+			MX6UL_PAD_UART2_RX_DATA__I2C4_SDA	0x4001f8b0
+		>;
+	};
+
+	pinctrl_pwm8: pwm8grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_HSYNC__PWM8_OUT		0x110b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA04__UART2_DCE_TX	0x1b0b1
+			MX6UL_PAD_NAND_DATA05__UART2_DCE_RX	0x1b0b1
+			MX6UL_PAD_NAND_DATA06__UART2_DCE_CTS	0x1b0b1
+			/*
+			 * mux unused RTS to make sure it doesn't cause
+			 * any interrupts when it is undefined
+			 */
+			MX6UL_PAD_NAND_DATA07__UART2_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART3_TX_DATA__UART3_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART3_RX_DATA__UART3_DCE_RX	0x1b0b1
+			MX6UL_PAD_UART3_CTS_B__UART3_DCE_CTS	0x1b0b1
+			MX6UL_PAD_UART3_RTS_B__UART3_DCE_RTS	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6UL_PAD_UART4_TX_DATA__UART4_DCE_TX	0x1b0b1
+			MX6UL_PAD_UART4_RX_DATA__UART4_DCE_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg1: usbotg1 {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
+			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10059
+			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
+			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
+			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
+			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
+			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x100b1	/* SD1_CD */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x10059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100b9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170b9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170b9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170b9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170b9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY	0x30b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
new file mode 100644
index 000000000000..a896b2348dd2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 exceet electronics GmbH
+ * Copyright (C) 2018 Kontron Electronics GmbH
+ * Copyright (c) 2019 Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#include "imx6ul.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Kontron N6310 SOM";
+	compatible = "kontron,imx6ul-n6310-som", "fsl,imx6ul";
+
+	memory@80000000 {
+		reg = <0x80000000 0x10000000>;
+		device_type = "memory";
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	spi-flash@0 {
+		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			micrel,led-mode = <0>;
+			clocks = <&clks IMX6UL_CLK_ENET_REF>;
+			clock-names = "rmii-ref";
+		};
+	};
+};
+
+&fec2 {
+	phy-mode = "rmii";
+	status = "disabled";
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-nand";
+		spi-max-frequency = <108000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		reg = <0>;
+
+		partition@0 {
+			label = "ubi1";
+			reg = <0x00000000 0x08000000>;
+		};
+
+		partition@8000000 {
+			label = "ubi2";
+			reg = <0x08000000 0x08000000>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_out>;
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6UL_PAD_CSI_DATA03__ECSPI2_MISO      0x100b1
+			MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI      0x100b1
+			MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK      0x100b1
+			MX6UL_PAD_CSI_DATA01__GPIO4_IO22       0x100b1
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER      0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN      0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1  0x4001b009
+		>;
+	};
+
+	pinctrl_enet1_mdio: enet1mdiogrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC         0x1b0b0
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO        0x1b0b0
+		>;
+	};
+
+	pinctrl_qspi: qspigrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK        0x70a1
+			MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00   0x70a1
+			MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01     0x70a1
+			MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02     0x70a1
+			MX6UL_PAD_NAND_CLE__QSPI_A_DATA03       0x70a1
+			MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B        0x70a1
+		>;
+	};
+
+	pinctrl_reset_out: rstoutgrp {
+		fsl,pins = <
+			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ul-opos6uldev.dts b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
index 0e59ee57fd55..8ecdb9ad2b2e 100644
--- a/arch/arm/boot/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/boot/dts/imx6ul-opos6uldev.dts
@@ -56,7 +56,7 @@
 		stdout-path = &uart1;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm3 0 191000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -97,6 +97,18 @@
 		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 	};
 
+	panel: panel {
+		compatible = "armadeus,st0700-adapt";
+		power-supply = <&reg_3v3>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lcdif_out>;
+			};
+		};
+	};
+
 	reg_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "5V";
@@ -182,28 +194,11 @@
 &lcdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_lcdif>;
-	display = <&display0>;
-	lcd-supply = <&reg_3v3>;
 	status = "okay";
 
-	display0: display0 {
-		bits-per-pixel = <32>;
-		bus-width = <18>;
-
-		display-timings {
-			timing0: timing0 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
+	port {
+		lcdif_out: endpoint {
+			remote-endpoint = <&panel_in>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index fc2997449b49..41f3b7f62bbf 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-pcl063.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -7,10 +7,9 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
-#include "imx6ul.dtsi"
 
 / {
-	model = "Phytec phyCORE i.MX6 UltraLite";
+	model = "PHYTEC phyCORE-i.MX6 UltraLite";
 	compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul";
 
 	chosen {
@@ -31,8 +30,7 @@
 		pinctrl-0 = <&pinctrl_gpioleds_som>;
 		compatible = "gpio-leds";
 
-		led_green {
-			label = "phycore:green";
+		phycore-green {
 			gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
@@ -43,20 +41,21 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy0>;
-	status = "okay";
+	phy-handle = <&ethphy1>;
+	status = "disabled";
 
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy0: ethernet-phy@1 {
+		ethphy1: ethernet-phy@1 {
 			reg = <1>;
 			interrupt-parent = <&gpio1>;
 			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 			micrel,led-mode = <1>;
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			clock-names = "rmii-ref";
+			status = "disabled";
 		};
 	};
 };
@@ -65,12 +64,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
 	nand-on-flash-bbt;
-	status = "okay";
+	status = "disabled";
 };
 
 &i2c1 {
 	pinctrl-names = "default";
-	pinctrl-0 =<&pinctrl_i2c1>;
+	pinctrl-0 = <&pinctrl_i2c1>;
 	clock-frequency = <100000>;
 	status = "okay";
 
@@ -90,19 +89,28 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
 &iomuxc {
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
-			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
+			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x10010
+			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x10010
 			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
 			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
 			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
 			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b010
+			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b010
+			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b010
 			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02	0x17059
 		>;
 	};
@@ -145,4 +153,19 @@
 		>;
 	};
 
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+		>;
+	};
+
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
index b6a1407a9d44..699dfcbf9a60 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin-full.dts
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-ff-rdk-nand.dts
@@ -5,13 +5,15 @@
  */
 
 /dts-v1/;
-#include "imx6ul-phytec-pcl063.dtsi"
-#include "imx6ul-phytec-phyboard-segin.dtsi"
-#include "imx6ul-phytec-peb-eval-01.dtsi"
+#include "imx6ul.dtsi"
+#include "imx6ul-phytec-phycore-som.dtsi"
+#include "imx6ul-phytec-segin.dtsi"
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
 
 / {
-	model = "Phytec phyBOARD-Segin i.MX6 UltraLite Full Featured";
-	compatible = "phytec,imx6ul-pbacd10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
+	compatible = "phytec,imx6ul-pbacd10-nand", "phytec,imx6ul-pbacd10",
+		     "phytec,imx6ul-pcl063", "fsl,imx6ul";
 };
 
 &adc1 {
@@ -27,9 +29,18 @@
 };
 
 &ecspi3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi3>;
-	cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
 	status = "okay";
 };
 
@@ -37,6 +48,10 @@
 	status = "okay";
 };
 
+&gpmi {
+	status = "okay";
+};
+
 &i2c_rtc {
 	status = "okay";
 };
@@ -76,14 +91,3 @@
 &usdhc1 {
 	status = "okay";
 };
-
-&iomuxc {
-	pinctrl_ecspi3: ecspi3grp {
-		fsl,pins = <
-			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
-			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
-			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
-			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
-		>;
-	};
-};
diff --git a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
index e2f38f39a6ad..2f3fd32a1167 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -21,20 +21,22 @@
 		};
 	};
 
-	user_leds: leds {
+	user_leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_user_leds>;
 		status = "disabled";
 
-		led_yellow {
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
+		user-led1 {
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
 		};
 
-		led_red {
-			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-on";
+		user-led2 {
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
index 7bf439a77d2c..8d5f8dc6ad58 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phyboard-segin.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-segin.dtsi
@@ -5,7 +5,7 @@
  */
 
 / {
-	model = "Phytec phyBOARD-Segin i.MX6 UltraLite";
+	model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite";
 	compatible = "phytec,imx6ul-pbacd-10", "phytec,imx6ul-pcl063", "fsl,imx6ul";
 
 	aliases {
@@ -103,11 +103,18 @@
 	assigned-clock-rates = <786432000>;
 };
 
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
 	phy-mode = "rmii";
-	phy-handle = <&ethphy1>;
+	phy-handle = <&ethphy2>;
 	status = "disabled";
 };
 
@@ -160,11 +167,12 @@
 };
 
 &mdio {
-	ethphy1: ethernet-phy@2 {
+	ethphy2: ethernet-phy@2 {
 		reg = <2>;
 		micrel,led-mode = <1>;
 		clocks = <&clks IMX6UL_CLK_ENET2_REF>;
 		clock-names = "rmii-ref";
+		status = "disabled";
 	};
 };
 
@@ -224,16 +232,25 @@
 		>;
 	};
 
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO	0x10b0
+			MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI	0x10b0
+			MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK	0x10b0
+			MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20	0x10b0
+		>;
+	};
+
 	pinctrl_enet2: enet2grp {
 		fsl,pins = <
 			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
 			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
 			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
 			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
-			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
-			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b010
+			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b010
+			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b010
 		>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 81d4b4925127..f008036e9294 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -93,18 +93,6 @@
 		};
 	};
 
-	intc: interrupt-controller@a01000 {
-		compatible = "arm,gic-400", "arm,cortex-a7-gic";
-		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupt-parent = <&intc>;
-		reg = <0x00a01000 0x1000>,
-		      <0x00a02000 0x2000>,
-		      <0x00a04000 0x2000>,
-		      <0x00a06000 0x2000>;
-	};
-
 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
@@ -171,6 +159,18 @@
 			reg = <0x00900000 0x20000>;
 		};
 
+		intc: interrupt-controller@a01000 {
+			compatible = "arm,gic-400", "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&intc>;
+			reg = <0x00a01000 0x1000>,
+			      <0x00a02000 0x2000>,
+			      <0x00a04000 0x2000>,
+			      <0x00a06000 0x2000>;
+		};
+
 		dma_apbh: dma-apbh@1804000 {
 			compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
 			reg = <0x01804000 0x2000>;
@@ -227,6 +227,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI1>,
 						 <&clks IMX6UL_CLK_ECSPI1>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -239,6 +241,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI2>,
 						 <&clks IMX6UL_CLK_ECSPI2>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -251,6 +255,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI3>,
 						 <&clks IMX6UL_CLK_ECSPI3>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -263,6 +269,8 @@
 					clocks = <&clks IMX6UL_CLK_ECSPI4>,
 						 <&clks IMX6UL_CLK_ECSPI4>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
@@ -510,8 +518,8 @@
 					 <&clks IMX6UL_CLK_ENET2_REF_125M>;
 				clock-names = "ipg", "ahb", "ptp",
 					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<1>;
-				fsl,num-rx-queues=<1>;
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
 				status = "disabled";
 			};
 
@@ -845,8 +853,8 @@
 					 <&clks IMX6UL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb", "ptp",
 					      "enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<1>;
-				fsl,num-rx-queues=<1>;
+				fsl,num-tx-queues = <1>;
+				fsl,num-rx-queues = <1>;
 				status = "disabled";
 			};
 
@@ -858,7 +866,7 @@
 					 <&clks IMX6UL_CLK_USDHC1>,
 					 <&clks IMX6UL_CLK_USDHC1>;
 				clock-names = "ipg", "ahb", "per";
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				fsl,tuning-start-tap = <20>;
 				bus-width = <4>;
 				status = "disabled";
@@ -873,7 +881,7 @@
 					 <&clks IMX6UL_CLK_USDHC2>;
 				clock-names = "ipg", "ahb", "per";
 				bus-width = <4>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				fsl,tuning-start-tap = <20>;
 				status = "disabled";
 			};
@@ -957,6 +965,15 @@
 				};
 			};
 
+			csi: csi@21c4000 {
+				compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+				reg = <0x021c4000 0x4000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX6UL_CLK_CSI>;
+				clock-names = "mclk";
+				status = "disabled";
+			};
+
 			lcdif: lcdif@21c8000 {
 				compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
 				reg = <0x021c8000 0x4000>;
diff --git a/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
new file mode 100644
index 000000000000..56cd16e5a77f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-phycore-som.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-phycore-som.dtsi"
+
+/ {
+	model = "PHYTEC phyCORE-i.MX6 ULL";
+	compatible = "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ gpioledssomgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
new file mode 100644
index 000000000000..9648d4ecaf58
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-emmc.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
+	compatible = "phytec,imx6ull-pbacd10-emmc", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
new file mode 100644
index 000000000000..656baf846453
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-ff-rdk-nand.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with NAND";
+	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&tlv320 {
+	status = "okay";
+};
+
+&ecspi3 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&ethphy2 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&fec2 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&reg_can1_en {
+	status = "okay";
+};
+
+&reg_sound_1v8 {
+	status = "okay";
+};
+
+&reg_sound_3v3 {
+	status = "okay";
+};
+
+&sai2 {
+	status = "okay";
+};
+
+&sound {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usbotg2 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
new file mode 100644
index 000000000000..e168494e0a6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-lc-rdk-nand.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6ull.dtsi"
+#include "imx6ull-phytec-phycore-som.dtsi"
+#include "imx6ull-phytec-segin.dtsi"
+#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL Low Cost with NAND";
+	compatible = "phytec,imx6ull-pbacd10-nand", "phytec,imx6ull-pbacd10",
+		     "phytec,imx6ull-pcl063", "fsl,imx6ull";
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&ethphy1 {
+	status = "okay";
+};
+
+&fec1 {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&usbotg1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
new file mode 100644
index 000000000000..ff08d95a1aa2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin-peb-eval-01.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
+
+&iomuxc {
+	/delete-node/ gpio_keysgrp;
+};
+
+&iomuxc_snvs {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x79
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
new file mode 100644
index 000000000000..c1595fc785f7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ull-phytec-segin.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 PHYTEC Messtechnik GmbH
+ * Author: Stefan Riedmueller <s.riedmueller@phytec.de>
+ */
+
+#include "imx6ul-phytec-segin.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Segin i.MX6 ULL";
+	compatible = "phytec,imx6ull-pbacd-10", "phytec,imx6ull-pcl063","fsl,imx6ull";
+};
+
+&iomuxc {
+	/delete-node/ flexcan1engrp;
+	/delete-node/ rtcintgrp;
+	/delete-node/ stmpegrp;
+};
+
+&iomuxc_snvs {
+	princtrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x17059
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01	0x17059
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 895fbde4d433..917eb0b58b13 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -54,6 +54,7 @@
 		regulator-name = "+V3.3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	reg_module_3v3_avdd: regulator-module-3v3-avdd {
@@ -61,6 +62,7 @@
 		regulator-name = "+V3.3_AVDD_AUDIO";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -99,8 +101,9 @@
 };
 
 &fec1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&pinctrl_enet1>;
+	pinctrl-1 = <&pinctrl_enet1_sleep>;
 	clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
 		<&clks IMX7D_ENET_AXI_ROOT_CLK>,
 		<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
@@ -115,6 +118,18 @@
 	fsl,magic-packet;
 };
 
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
 &gpmi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpmi_nand>;
@@ -125,8 +140,12 @@
 
 &i2c1 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery &pinctrl_i2c1_int>;
+	scl-gpios = <&gpio1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
 	status = "okay";
 
 	codec: sgtl5000@a {
@@ -227,8 +246,11 @@
 
 &i2c4 {
 	clock-frequency = <100000>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-1 = <&pinctrl_i2c4_recovery>;
+	scl-gpios = <&gpio7 8 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio7 9 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &lcdif {
@@ -267,10 +289,6 @@
 	status = "okay";
 };
 
-&snvs_pwrkey {
-	status = "disabled";
-};
-
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
@@ -323,16 +341,16 @@
 	vmmc-supply = <&reg_module_3v3>;
 	vqmmc-supply = <&reg_DCDC3>;
 	non-removable;
+	sdhci-caps-mask = <0x80000000 0x0>;
 };
 
 &iomuxc {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
+		     &pinctrl_gpio7>;
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x74 /* SODIMM 55 */
-			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x74 /* SODIMM 63 */
 			MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16	0x14 /* SODIMM 77 */
 			MX7D_PAD_EPDC_DATA09__GPIO2_IO9		0x14 /* SODIMM 89 */
 			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x74 /* SODIMM 91 */
@@ -413,6 +431,13 @@
 		>;
 	};
 
+	pinctrl_gpio7: gpio7-grp { /* Alternatively CAN1 */
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3	0x14 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2	0x14 /* SODIMM 63 */
+		>;
+	};
+
 	pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
 		fsl,pins = <
 			MX7D_PAD_GPIO1_IO13__GPIO1_IO13	0x79
@@ -442,6 +467,22 @@
 		>;
 	};
 
+	pinctrl_enet1_sleep: enet1sleepgrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RX_CTL__GPIO7_IO4		0x0
+			MX7D_PAD_ENET1_RGMII_RD0__GPIO7_IO0		0x0
+			MX7D_PAD_ENET1_RGMII_RD1__GPIO7_IO1		0x0
+			MX7D_PAD_ENET1_RGMII_RXC__GPIO7_IO5		0x0
+
+			MX7D_PAD_ENET1_RGMII_TX_CTL__GPIO7_IO10		0x0
+			MX7D_PAD_ENET1_RGMII_TD0__GPIO7_IO6		0x0
+			MX7D_PAD_ENET1_RGMII_TD1__GPIO7_IO7		0x0
+			MX7D_PAD_GPIO1_IO12__GPIO1_IO12			0x0
+			MX7D_PAD_SD2_CD_B__GPIO5_IO9			0x0
+			MX7D_PAD_SD2_WP__GPIO5_IO10			0x0
+		>;
+	};
+
 	pinctrl_ecspi3_cs: ecspi3-cs-grp {
 		fsl,pins = <
 			MX7D_PAD_I2C2_SDA__GPIO4_IO11		0x14
@@ -456,10 +497,17 @@
 		>;
 	};
 
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_RD3__FLEXCAN1_TX	0x79 /* SODIMM 55 */
+			MX7D_PAD_ENET1_RGMII_RD2__FLEXCAN1_RX	0x79 /* SODIMM 63 */
+		>;
+	};
+
 	pinctrl_flexcan2: flexcan2-grp {
 		fsl,pins = <
-			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x59
-			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x59
+			MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX	0x79 /* SODIMM 188 */
+			MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX	0x79 /* SODIMM 178 */
 		>;
 	};
 
@@ -495,6 +543,13 @@
 		>;
 	};
 
+	pinctrl_i2c4_recovery: i2c4-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_ENET1_RGMII_TD2__GPIO7_IO8	0x4000007f
+			MX7D_PAD_ENET1_RGMII_TD3__GPIO7_IO9	0x4000007f
+		>;
+	};
+
 	pinctrl_lcdif_dat: lcdif-dat-grp {
 		fsl,pins = <
 			MX7D_PAD_LCD_DATA00__LCD_DATA0		0x79
@@ -695,6 +750,13 @@
 		>;
 	};
 
+	pinctrl_i2c1_recovery: i2c1-recoverygrp {
+		fsl,pins = <
+			MX7D_PAD_LPSR_GPIO1_IO04__GPIO1_IO4	0x4000007f
+			MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5	0x4000007f
+		>;
+	};
+
 	pinctrl_cd_usdhc1: usdhc1-cd-grp {
 		fsl,pins = <
 			MX7D_PAD_LPSR_GPIO1_IO00__GPIO1_IO0	0x59 /* CD */
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index e61567437d73..7646284e13a7 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -44,7 +44,7 @@
 			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";
@@ -54,10 +54,12 @@
 		#size-cells = <0>;
 
 		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
 		};
 
 		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
 		};
 	};
@@ -70,7 +72,7 @@
 			  <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
 	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
 	assigned-clock-rates = <0>, <100000000>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy1>;
 	fsl,magic-packet;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
new file mode 100644
index 000000000000..2b8d6cc45a53
--- /dev/null
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device tree file for ZII's RMU2 board
+ *
+ * RMU - Remote Modem Unit
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include <dt-bindings/thermal/thermal.h>
+#include "imx7d.dtsi"
+
+/ {
+	model = "ZII RMU2 Board";
+	compatible = "zii,imx7d-rmu2", "fsl,imx7d";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pinctrl_leds_debug>;
+		pinctrl-names = "default";
+
+		debug {
+			label = "zii:green:debug1";
+			gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&cpu0 {
+	arm-supply = <&sw1a_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+			  <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+	assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+	assigned-clock-rates = <0>, <100000000>;
+	phy-mode = "rgmii";
+	phy-handle = <&fec1_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fec1_phy: ethernet-phy@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_enet1_phy_reset>,
+				    <&pinctrl_enet1_phy_interrupt>;
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze3000";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1a {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1b {
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1475000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vldo1 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vldo2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vccsd {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: v33 {
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vldo4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c04";
+		reg = <0x52>;
+	};
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	assigned-clocks = <&clks IMX7D_UART4_ROOT_SRC>;
+	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
+	status = "okay";
+
+	rave-sp {
+		compatible = "zii,rave-sp-rdu2";
+		current-speed = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX7D_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x2
+			MX7D_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x2
+			MX7D_PAD_ECSPI1_MISO__ECSPI1_MISO	0x2
+			MX7D_PAD_ECSPI1_SS0__GPIO4_IO19         0x59
+		>;
+	};
+
+	pinctrl_enet1: enet1grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_CD_B__ENET1_MDIO				0x3
+			MX7D_PAD_SD2_WP__ENET1_MDC				0x3
+			MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC		0x1
+			MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0		0x1
+			MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1		0x1
+			MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2		0x1
+			MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3		0x1
+			MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL		0x1
+			MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC		0x1
+			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0		0x1
+			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1		0x1
+			MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2		0x1
+			MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3		0x1
+			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL		0x1
+		>;
+	};
+
+	pinctrl_enet1_phy_reset: enet1phyresetgrp {
+		fsl,pins = <
+			MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x14
+
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX7D_PAD_I2C1_SDA__I2C1_SDA		0x4000007f
+			MX7D_PAD_I2C1_SCL__I2C1_SCL		0x4000007f
+		>;
+	};
+
+	pinctrl_leds_debug: ledsgrp {
+		fsl,pins = <
+			MX7D_PAD_EPDC_DATA08__GPIO2_IO8		0x59
+		>;
+	};
+
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX	0x79
+			MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX7D_PAD_SD2_DATA0__UART4_DCE_RX	0x79
+			MX7D_PAD_SD2_DATA1__UART4_DCE_TX	0x79
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX7D_PAD_SD1_CMD__SD1_CMD		0x59
+			MX7D_PAD_SD1_CLK__SD1_CLK		0x19
+			MX7D_PAD_SD1_DATA0__SD1_DATA0		0x59
+			MX7D_PAD_SD1_DATA1__SD1_DATA1		0x59
+			MX7D_PAD_SD1_DATA2__SD1_DATA2		0x59
+			MX7D_PAD_SD1_DATA3__SD1_DATA3		0x59
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX7D_PAD_SD3_CMD__SD3_CMD		0x59
+			MX7D_PAD_SD3_CLK__SD3_CLK		0x19
+			MX7D_PAD_SD3_DATA0__SD3_DATA0		0x59
+			MX7D_PAD_SD3_DATA1__SD3_DATA1		0x59
+			MX7D_PAD_SD3_DATA2__SD3_DATA2		0x59
+			MX7D_PAD_SD3_DATA3__SD3_DATA3		0x59
+			MX7D_PAD_SD3_DATA4__SD3_DATA4		0x59
+			MX7D_PAD_SD3_DATA5__SD3_DATA5		0x59
+			MX7D_PAD_SD3_DATA6__SD3_DATA6		0x59
+			MX7D_PAD_SD3_DATA7__SD3_DATA7		0x59
+			MX7D_PAD_SD3_RESET_B__SD3_RESET_B	0x59
+		>;
+	};
+};
+
+&iomuxc_lpsr {
+	pinctrl_enet1_phy_interrupt: enet1phyinterruptgrp {
+		fsl,phy = <
+			MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2	0x08
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index 4a78ddc7513d..39812c92bf0d 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -669,10 +669,6 @@
 	status = "disabled";
 };
 
-&snvs_pwrkey {
-	status = "disabled";
-};
-
 &iomuxc {
 	pinctrl_ecspi1: ecspi1grp {
 		fsl,pins = <
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 42528d2812a2..9c8dd32cc035 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -147,8 +147,8 @@
 			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
 		clock-names = "ipg", "ahb", "ptp",
 			"enet_clk_ref", "enet_out";
-		fsl,num-tx-queues=<3>;
-		fsl,num-rx-queues=<3>;
+		fsl,num-tx-queues = <3>;
+		fsl,num-rx-queues = <3>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index c1a4fff5ceda..710f850e785c 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -151,7 +151,7 @@
 		compatible = "fsl,imx7d-tempmon";
 		interrupt-parent = <&gpc>;
 		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,tempmon =<&anatop>;
+		fsl,tempmon = <&anatop>;
 		nvmem-cells = <&tempmon_calib>,
 			<&tempmon_temp_grade>;
 		nvmem-cell-names = "calib", "temp_grade";
@@ -1184,8 +1184,8 @@
 					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
 				clock-names = "ipg", "ahb", "ptp",
 					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index 56907bb4b329..6859a3a83750 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -101,6 +101,34 @@
 		reg = <0x40000000 0x800000>;
 		ranges;
 
+		edma1: dma-controller@40080000 {
+			#dma-cells = <2>;
+			compatible = "fsl,imx7ulp-edma";
+			reg = <0x40080000 0x2000>,
+				<0x40210000 0x1000>;
+			dma-channels = <32>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "dma", "dmamux0";
+			clocks = <&pcc2 IMX7ULP_CLK_DMA1>,
+				 <&pcc2 IMX7ULP_CLK_DMA_MUX1>;
+		};
+
 		crypto: crypto@40240000 {
 			compatible = "fsl,sec-v4.0";
 			#address-cells = <1>;
@@ -201,12 +229,12 @@
 			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
 				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
 				 <&pcc2 IMX7ULP_CLK_USDHC0>;
-			clock-names ="ipg", "ahb", "per";
+			clock-names = "ipg", "ahb", "per";
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC0>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;
 			bus-width = <4>;
 			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step= <2>;
+			fsl,tuning-step = <2>;
 			status = "disabled";
 		};
 
@@ -217,12 +245,12 @@
 			clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
 				 <&scg1 IMX7ULP_CLK_NIC1_DIV>,
 				 <&pcc2 IMX7ULP_CLK_USDHC1>;
-			clock-names ="ipg", "ahb", "per";
+			clock-names = "ipg", "ahb", "per";
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_USDHC1>;
 			assigned-clock-parents = <&scg1 IMX7ULP_CLK_NIC1_DIV>;
 			bus-width = <4>;
 			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step= <2>;
+			fsl,tuning-step = <2>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts
index 9466913693ac..28732249cfc0 100644
--- a/arch/arm/boot/dts/vf610-zii-cfu1.dts
+++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts
@@ -207,7 +207,7 @@
 };
 
 &i2c0 {
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c0>;
 	status = "okay";
@@ -236,6 +236,18 @@
 	};
 };
 
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	watchdog@38 {
+		compatible = "zii,rave-wdt";
+		reg = <0x38>;
+	};
+};
+
 &snvsrtc {
 	status = "disabled";
 };
@@ -304,6 +316,13 @@
 		>;
 	};
 
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			VF610_PAD_PTB16__I2C1_SCL		0x37ff
+			VF610_PAD_PTB17__I2C1_SDA		0x37ff
+		>;
+	};
+
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
index d7019e89f588..dc8a5f37a1ef 100644
--- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
+++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts
@@ -565,6 +565,8 @@
 		#gpio-cells = <2>;
 		reg = <0x20>;
 		gpio-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 	};
 
 	lm75@4e {
@@ -777,7 +779,8 @@
 			VF610_PAD_PTB15__I2C0_SDA		0x37ff
 		>;
 	};
-		pinctrl_i2c1: i2c1grp {
+
+	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
 			VF610_PAD_PTB16__I2C1_SCL		0x37ff
 			VF610_PAD_PTB17__I2C1_SDA		0x37ff
@@ -791,13 +794,6 @@
 		>;
 	};
 
-	pinctrl_i2c3: i2c3grp {
-		fsl,pins = <
-			VF610_PAD_PTA30__I2C3_SCL		0x37ff
-			VF610_PAD_PTA31__I2C3_SDA		0x37ff
-		>;
-	};
-
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			 VF610_PAD_PTB26__GPIO_96		0x31c2
diff --git a/arch/arm/boot/dts/vf610-zii-spb4.dts b/arch/arm/boot/dts/vf610-zii-spb4.dts
index 9dde83ccb9d1..77e1484211e4 100644
--- a/arch/arm/boot/dts/vf610-zii-spb4.dts
+++ b/arch/arm/boot/dts/vf610-zii-spb4.dts
@@ -316,13 +316,6 @@
 		>;
 	};
 
-	pinctrl_i2c1: i2c1grp {
-		fsl,pins = <
-			VF610_PAD_PTB16__I2C1_SCL		0x37ff
-			VF610_PAD_PTB17__I2C1_SDA		0x37ff
-		>;
-	};
-
 	pinctrl_leds_debug: pinctrl-leds-debug {
 		fsl,pins = <
 			VF610_PAD_PTD3__GPIO_82			0x31c2
author	Arnd Bergmann <arnd@arndb.de>	2019-09-03 17:08:40 +0300
committer	Arnd Bergmann <arnd@arndb.de>	2019-09-03 17:08:41 +0300
commit	a0a4c25fba92d570f3256495328787ee30c3b044 (patch)
tree	d99478e1e0b8d442e7e894842e92996966691286 /arch/arm
parent	89e4acf7a382a30425dc4fc0ac41798c9a810c09 (diff)
parent	b04f537caab4deae1b839438e8fd5ed4bc598b43 (diff)
download	linux-a0a4c25fba92d570f3256495328787ee30c3b044.tar.xz