diff options
| author | Marek Vasut <marex@denx.de> | 2012-08-26 16:59:31 +0400 |
|---|---|---|
| committer | Shawn Guo <shawn.guo@linaro.org> | 2012-08-28 00:45:11 +0400 |
| commit | 91ed4938ced262e3356a377b08e1f367da941a85 (patch) | |
| tree | 5bf544c5e3eea3a4ad97b44c15c01c28ce510712 /arch/arm | |
| parent | bb2f1261c2ededd168d774e84e456bdad25ffdbf (diff) | |
| download | linux-91ed4938ced262e3356a377b08e1f367da941a85.tar.xz | |
ARM: mxs: Update DENX M28 machine and dts file
Update the mach-mxs machine by removing the enet_clkout(). The new
revision of the board doesn't need that. Also, update the DTS file
with all the new drivers pulled in the mainline recently, that is,
SPI, LRADC, USB.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/imx28-m28evk.dts | 79 | ||||
| -rw-r--r-- | arch/arm/mach-mxs/mach-mxs.c | 1 |
2 files changed, 73 insertions, 7 deletions
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index ac3eff96a70c..8118b64362b6 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -23,6 +23,8 @@ apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; @@ -62,9 +64,27 @@ &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio3 10 1>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; @@ -72,8 +92,11 @@ hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ + 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -129,6 +152,7 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { @@ -151,32 +175,51 @@ }; }; + lradc@80050000 { + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + usbphy0: usbphy@8007c000 { status = "okay"; }; - auart3: serial@80070000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; + pinctrl-0 = <&auart0_2pins_a>; status = "okay"; }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_a>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy1_pins_a>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio3 11 0>; status = "okay"; }; @@ -198,6 +241,30 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 0>; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 13 0>; + }; }; sound { diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 3b0d9c64c235..5cbb6376c685 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -288,7 +288,6 @@ static void __init imx28_evk_post_init(void) static void __init m28evk_init(void) { - enable_clk_enet_out(); update_fec_mac_prop(OUI_DENX); mxsfb_pdata.mode_list = m28evk_video_modes; |