Merge branch 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91 into at91/staging/base2+cleanup

* 'at91-3.4-base2+cleanup' of git://github.com/at91linux/linux-at91: (20 commits)
  ARM: at91: properly sort dtb files in Makefile.boot
  ARM: at91: add at91sam9g25ek.dts in Makefile.boot
  ARM: at91/board-dt: drop default console
  Atmel: move console default platform_device to serial driver
  ARM: at91: merge SRAM Memory banks thanks to mirroring
  ARM: at91: finally drop at91_sys_read/write
  ARM: at91/rtc-at91sam9: pass the GPBR to use via resources
  ARM: at91:rtc/rtc-at91sam9: ioremap register bank
  ARM: at91/rtc-at91sam9: each SoC can select the RTT device to use
  ARM: at91/PMC: make register base soc independent
  ARM: at91/PMC: move assignment out of printf
  ARM: at91/pm_slowclock: add runtime detection of memory contoller
  ARM: at91: make sdram/ddr register base soc independent
  ARM: at91: move at91rm9200 sdramc defines to at91rm9200_sdramc.h
  ARM: at91/pm_slowclock: function slow_clock() accepts parameters
  ARM: at91/pm_slowclock: rename register to named define
  ARM: at91/ST: remove not needed casts
  ARM: at91: make ST (System Timer) soc independent
  ARM: at91: make matrix register base soc independent
  ARM: at91/at91x40: remove use of at91_sys_read/write

Based on top of the at91/9x5, rmk/for-armsoc, at91/device-board,
at91/pm_cleanup and at91/base.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

202 files changed, 2697 insertions, 5481 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a48aecc17eac..92c9c79c140c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -324,7 +324,7 @@ config ARCH_AT91
 	select CLKDEV_LOOKUP
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
-	  AT91SAM9 and AT91CAP9 processors.
+	  AT91SAM9 processors.
 
 config ARCH_BCMRING
 	bool "Broadcom BCMRING"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d7ff73..b895a2a92da8 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,47 +81,14 @@ choice
 	prompt "Kernel low-level debugging port"
 	depends on DEBUG_LL
 
-	config DEBUG_LL_UART_NONE
-		bool "No low-level debugging UART"
-		help
-		  Say Y here if your platform doesn't provide a UART option
-		  below. This relies on your platform choosing the right UART
-		  definition internally in order for low-level debugging to
-		  work.
-
-	config DEBUG_ICEDCC
-		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the EmbeddedICE macrocell's DCC channel using
-		  co-processor 14. This is known to work on the ARM9 style ICE
-		  channel and on the XScale with the PEEDI.
-
-		  Note that the system will appear to hang during boot if there
-		  is nothing connected to read from the DCC.
-
 	config AT91_DEBUG_LL_DBGU0
 		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
 		depends on HAVE_AT91_DBGU0
 
 	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and cap9"
+		bool "Kernel low-level debugging on 9263 and 9g45"
 		depends on HAVE_AT91_DBGU1
 
-	config DEBUG_FOOTBRIDGE_COM1
-		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the 8250 at PCI COM1.
-
-	config DEBUG_DC21285_PORT
-		bool "Kernel low-level debugging messages via footbridge serial port"
-		depends on FOOTBRIDGE
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port in the DC21285 (Footbridge).
-
 	config DEBUG_CLPS711X_UART1
 		bool "Kernel low-level debugging messages via UART1"
 		depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
+	config DEBUG_DC21285_PORT
+		bool "Kernel low-level debugging messages via footbridge serial port"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port in the DC21285 (Footbridge).
+
+	config DEBUG_FOOTBRIDGE_COM1
+		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+		depends on FOOTBRIDGE
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the 8250 at PCI COM1.
+
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
 		depends on ARCH_HIGHBANK
@@ -206,38 +187,42 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6Q.
 
-	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 0 for low-level debug"
+	config DEBUG_MSM_UART1
+		bool "Kernel low-level debugging messages via MSM UART1"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+		  their output to the first serial port on MSM devices.
 
-	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 1 for low-level debug"
+	config DEBUG_MSM_UART2
+		bool "Kernel low-level debugging messages via MSM UART2"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
+		  their output to the second serial port on MSM devices.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+	config DEBUG_MSM_UART3
+		bool "Kernel low-level debugging messages via MSM UART3"
+		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on MSM devices.
 
-	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
-		bool "Use S3C UART 2 for low-level debug"
+	config DEBUG_MSM8660_UART
+		bool "Kernel low-level debugging messages via MSM 8660 UART"
+		depends on ARCH_MSM8X60
+		select MSM_HAS_DEBUG_UART_HS
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
+		  their output to the serial port on MSM 8660 devices.
 
-		  The uncompressor code port configuration is now handled
-		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+	config DEBUG_MSM8960_UART
+		bool "Kernel low-level debugging messages via MSM 8960 UART"
+		depends on ARCH_MSM8960
+		select MSM_HAS_DEBUG_UART_HS
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on MSM 8960 devices.
 
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
@@ -255,42 +240,57 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
-	config DEBUG_MSM_UART1
-		bool "Kernel low-level debugging messages via MSM UART1"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+	config DEBUG_S3C_UART0
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 0 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on MSM devices.
+		  their output to UART 0. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM_UART2
-		bool "Kernel low-level debugging messages via MSM UART2"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART1
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 1 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the second serial port on MSM devices.
+		  their output to UART 1. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM_UART3
-		bool "Kernel low-level debugging messages via MSM UART3"
-		depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_S3C_UART2
+		depends on PLAT_SAMSUNG
+		bool "Use S3C UART 2 for low-level debug"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the third serial port on MSM devices.
+		  their output to UART 2. The port must have been initialised
+		  by the boot-loader before use.
 
-	config DEBUG_MSM8660_UART
-		bool "Kernel low-level debugging messages via MSM 8660 UART"
-		depends on ARCH_MSM8X60
-		select MSM_HAS_DEBUG_UART_HS
+		  The uncompressor code port configuration is now handled
+		  by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+	config DEBUG_LL_UART_NONE
+		bool "No low-level debugging UART"
 		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8660 devices.
+		  Say Y here if your platform doesn't provide a UART option
+		  below. This relies on your platform choosing the right UART
+		  definition internally in order for low-level debugging to
+		  work.
 
-	config DEBUG_MSM8960_UART
-		bool "Kernel low-level debugging messages via MSM 8960 UART"
-		depends on ARCH_MSM8960
-		select MSM_HAS_DEBUG_UART_HS
+	config DEBUG_ICEDCC
+		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on MSM 8960 devices.
+		  their output to the EmbeddedICE macrocell's DCC channel using
+		  co-processor 14. This is known to work on the ARM9 style ICE
+		  channel and on the XScale with the PEEDI.
+
+		  Note that the system will appear to hang during boot if there
+		  is nothing connected to read from the DCC.
 
 endchoice
 
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
new file mode 100644
index 000000000000..e64eb932083b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -0,0 +1,37 @@
+/*
+ * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9x5.dtsi"
+/include/ "at91sam9x5cm.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G25-EK";
+	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			usart0: serial@f801c000 {
+				status = "okay";
+			};
+
+			macb0: ethernet@f802c000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
new file mode 100644
index 000000000000..e91391f50730
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -0,0 +1,172 @@
+/*
+ * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
+ *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
+ *                   AT91SAM9X25, AT91SAM9X35 SoC
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9x5 family SoC";
+	compatible = "atmel,at91sam9x5";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		gpio0 = &pioA;
+		gpio1 = &pioB;
+		gpio2 = &pioC;
+		gpio3 = &pioD;
+		tcb0 = &tcb0;
+		tcb1 = &tcb1;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <2>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				interrupt-parent;
+				reg = <0xfffff000 0x200>;
+			};
+
+			pit: timer@fffffe30 {
+				compatible = "atmel,at91sam9260-pit";
+				reg = <0xfffffe30 0xf>;
+				interrupts = <1 4>;
+			};
+
+			tcb0: timer@f8008000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf8008000 0x100>;
+				interrupts = <17 4>;
+			};
+
+			tcb1: timer@f800c000 {
+				compatible = "atmel,at91sam9x5-tcb";
+				reg = <0xf800c000 0x100>;
+				interrupts = <17 4>;
+			};
+
+			dma0: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <20 4>;
+			};
+
+			dma1: dma-controller@ffffee00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffee00 0x200>;
+				interrupts = <21 4>;
+			};
+
+			pioA: gpio@fffff400 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff400 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			pioB: gpio@fffff600 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff600 0x100>;
+				interrupts = <2 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			pioC: gpio@fffff800 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffff800 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			pioD: gpio@fffffa00 {
+				compatible = "atmel,at91rm9200-gpio";
+				reg = <0xfffffa00 0x100>;
+				interrupts = <3 4>;
+				#gpio-cells = <2>;
+				gpio-controller;
+			};
+
+			dbgu: serial@fffff200 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfffff200 0x200>;
+				interrupts = <1 4>;
+				status = "disabled";
+			};
+
+			usart0: serial@f801c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf801c000 0x200>;
+				interrupts = <5 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@f8020000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8020000 0x200>;
+				interrupts = <6 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@f8024000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xf8024000 0x200>;
+				interrupts = <7 4>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			macb0: ethernet@f802c000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf802c000 0x100>;
+				interrupts = <24 4>;
+				status = "disabled";
+			};
+
+			macb1: ethernet@f8030000 {
+				compatible = "cdns,at32ap7000-macb", "cdns,macb";
+				reg = <0xf8030000 0x100>;
+				interrupts = <27 4>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
new file mode 100644
index 000000000000..4ab5a77f4afc
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -0,0 +1,14 @@
+/*
+ * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
+ *
+ *  Copyright (C) 2012 Atmel,
+ *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/ {
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+};
diff --git a/arch/arm/configs/at91cap9_defconfig b/arch/arm/configs/at91cap9_defconfig
deleted file mode 100644
index 8826eb218e73..000000000000
--- a/arch/arm/configs/at91cap9_defconfig
+++ /dev/null
@@ -1,108 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91CAP9=y
-CONFIG_MACH_AT91CAP9ADK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc6ec0c..424aa458c487 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -110,6 +110,7 @@ extern void cpu_init(void);
 
 void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
 
 #define UDBG_UNDEFINED	(1 << 0)
 #define UDBG_SYSCALL	(1 << 1)
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c253a9..008e7ce766a7 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -61,8 +61,6 @@ extern void setup_mm_for_reboot(void);
 
 static volatile int hlt_counter;
 
-#include <mach/system.h>
-
 void disable_hlt(void)
 {
 	hlt_counter++;
@@ -181,13 +179,17 @@ void cpu_idle_wait(void)
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
 /*
- * This is our default idle handler.  We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
  */
+
+void (*arm_pm_idle)(void);
+
 static void default_idle(void)
 {
-	if (!need_resched())
-		arch_idle();
+	if (arm_pm_idle)
+		arm_pm_idle();
+	else
+		cpu_do_idle();
 	local_irq_enable();
 }
 
@@ -215,6 +217,10 @@ void cpu_idle(void)
 				cpu_die();
 #endif
 
+			/*
+			 * We need to disable interrupts here
+			 * to ensure we don't miss a wakeup call.
+			 */
 			local_irq_disable();
 #ifdef CONFIG_PL310_ERRATA_769419
 			wmb();
@@ -222,19 +228,18 @@ void cpu_idle(void)
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();
-			} else {
+			} else if (!need_resched()) {
 				stop_critical_timings();
 				if (cpuidle_idle_call())
 					pm_idle();
 				start_critical_timings();
 				/*
-				 * This will eventually be removed - pm_idle
-				 * functions should always return with IRQs
-				 * enabled.
+				 * pm_idle functions must always
+				 * return with IRQs enabled.
 				 */
 				WARN_ON(irqs_disabled());
+			} else
 				local_irq_enable();
-			}
 		}
 		leds_event(led_idle_end);
 		rcu_idle_exit();
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 71feb00a1e99..e55cdcbd81fb 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -102,13 +102,13 @@ config ARCH_AT91SAM9G45
 	select HAVE_AT91_DBGU1
 	select AT91_SAM9G45_RESET
 
-config ARCH_AT91CAP9
-	bool "AT91CAP9"
+config ARCH_AT91SAM9X5
+	bool "AT91SAM9x5 family"
 	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
-	select HAVE_AT91_DBGU1
+	select HAVE_AT91_DBGU0
 	select AT91_SAM9G45_RESET
 
 config ARCH_AT91X40
@@ -447,21 +447,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT91CAP9
-
-comment "AT91CAP9 Board Type"
-
-config MACH_AT91CAP9ADK
-	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
-
-endif
-
-# ----------------------------------------------------------
-
 if ARCH_AT91X40
 
 comment "AT91X40 Board Type"
@@ -544,7 +529,7 @@ config AT91_EARLY_DBGU0
 	depends on HAVE_AT91_DBGU0
 
 config AT91_EARLY_DBGU1
-	bool "DBGU on 9263, 9g45 and cap9"
+	bool "DBGU on 9263 and 9g45"
 	depends on HAVE_AT91_DBGU1
 
 config AT91_EARLY_USART0
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 705e1fbded39..1b6518518d99 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_d
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9X5)	+= at91sam9x5.o at91sam926x_time.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -81,9 +81,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 # AT91SAM board with device-tree
 obj-$(CONFIG_MACH_AT91SAM_DT) += board-dt.o
 
-# AT91CAP9 board-specific support
-obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
-
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
 
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index 8ddafadfdc7d..0da66ca4a4f8 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -3,11 +3,7 @@
 #   PARAMS_PHYS must be within 4MB of ZRELADDR
 #   INITRD_PHYS must be in RAM
 
-ifeq ($(CONFIG_ARCH_AT91CAP9),y)
-   zreladdr-y	+= 0x70008000
-params_phys-y	:= 0x70000100
-initrd_phys-y	:= 0x70410000
-else ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
+ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
    zreladdr-y	+= 0x70008000
 params_phys-y	:= 0x70000100
 initrd_phys-y	:= 0x70410000
@@ -17,4 +13,10 @@ params_phys-y	:= 0x20000100
 initrd_phys-y	:= 0x20410000
 endif
 
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
+# Keep dtb files sorted alphabetically for each SoC
+# sam9g20
+dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
+# sam9g45
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
+# sam9x5
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
deleted file mode 100644
index a42edc25a87e..000000000000
--- a/arch/arm/mach-at91/at91cap9.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91_pmc.h>
-
-#include "soc.h"
-#include "generic.h"
-#include "clock.h"
-#include "sam9_smc.h"
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioABCD_clk = {
-	.name		= "pioABCD_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_PIOABCD,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb0_clk = {
-	.name		= "mpb0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb1_clk = {
-	.name		= "mpb1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb2_clk = {
-	.name		= "mpb2_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb3_clk = {
-	.name		= "mpb3_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mpb4_clk = {
-	.name		= "mpb4_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MPB4,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
-	.name		= "mci0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MCI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
-	.name		= "mci1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_MCI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
-	.name		= "can_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_CAN,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
-	.name		= "twi_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_TWI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
-	.name		= "ac97_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_AC97C,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
-	.name		= "tcb_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_TCB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
-	.name		= "pwm_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_PWMC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "pclk",
-	.pmc_mask	= 1 << AT91CAP9_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk aestdes_clk = {
-	.name		= "aestdes_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_AESTDES,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
-	.name		= "adc_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_ADC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
-	.name		= "isi_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_ISI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
-	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_LCDC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
-	.name		= "dma_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_DMA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
-	.name		= "udphs_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_UDPHS,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT91CAP9_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioABCD_clk,
-	&mpb0_clk,
-	&mpb1_clk,
-	&mpb2_clk,
-	&mpb3_clk,
-	&mpb4_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc0_clk,
-	&mmc1_clk,
-	&can_clk,
-	&twi_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ac97_clk,
-	&tcb_clk,
-	&pwm_clk,
-	&macb_clk,
-	&aestdes_clk,
-	&adc_clk,
-	&isi_clk,
-	&lcdc_clk,
-	&dma_clk,
-	&udphs_clk,
-	&ohci_clk,
-	// irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
-	/* One additional fake clock for macb_hclk */
-	CLKDEV_CON_ID("hclk", &macb_clk),
-	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
-	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
-	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
-	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
-	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
-	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
-	/* fake hclk clock */
-	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
-	CLKDEV_CON_ID("pioA", &pioABCD_clk),
-	CLKDEV_CON_ID("pioB", &pioABCD_clk),
-	CLKDEV_CON_ID("pioC", &pioABCD_clk),
-	CLKDEV_CON_ID("pioD", &pioABCD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
-	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static void __init at91cap9_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clkdev_add_table(periph_clocks_lookups,
-			 ARRAY_SIZE(periph_clocks_lookups));
-	clkdev_add_table(usart_clocks_lookups,
-			 ARRAY_SIZE(usart_clocks_lookups));
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at91cap9_set_console_clock(int id)
-{
-	if (id >= ARRAY_SIZE(usart_clocks_lookups))
-		return;
-
-	console_clock_lookup.con_id = "usart";
-	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
-	clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
-	{
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOA,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOB,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOC,
-	}, {
-		.id		= AT91CAP9_ID_PIOABCD,
-		.regbase	= AT91CAP9_BASE_PIOD,
-	}
-};
-
-/* --------------------------------------------------------------------
- *  AT91CAP9 processor initialization
- * -------------------------------------------------------------------- */
-
-static void __init at91cap9_map_io(void)
-{
-	at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE);
-}
-
-static void __init at91cap9_ioremap_registers(void)
-{
-	at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
-	at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
-	at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
-	at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
-}
-
-static void __init at91cap9_initialize(void)
-{
-	arm_pm_restart = at91sam9g45_restart;
-	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at91cap9_gpio, 4);
-
-	/* Remember the silicon revision */
-	if (cpu_is_at91cap9_revB())
-		system_rev = 0xB;
-	else if (cpu_is_at91cap9_revC())
-		system_rev = 0xC;
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller (FIQ) */
-	7,	/* System Peripherals */
-	1,	/* Parallel IO Controller A, B, C and D */
-	0,	/* MP Block Peripheral 0 */
-	0,	/* MP Block Peripheral 1 */
-	0,	/* MP Block Peripheral 2 */
-	0,	/* MP Block Peripheral 3 */
-	0,	/* MP Block Peripheral 4 */
-	5,	/* USART 0 */
-	5,	/* USART 1 */
-	5,	/* USART 2 */
-	0,	/* Multimedia Card Interface 0 */
-	0,	/* Multimedia Card Interface 1 */
-	3,	/* CAN */
-	6,	/* Two-Wire Interface */
-	5,	/* Serial Peripheral Interface 0 */
-	5,	/* Serial Peripheral Interface 1 */
-	4,	/* Serial Synchronous Controller 0 */
-	4,	/* Serial Synchronous Controller 1 */
-	5,	/* AC97 Controller */
-	0,	/* Timer Counter 0, 1 and 2 */
-	0,	/* Pulse Width Modulation Controller */
-	3,	/* Ethernet */
-	0,	/* Advanced Encryption Standard, Triple DES*/
-	0,	/* Analog-to-Digital Converter */
-	0,	/* Image Sensor Interface */
-	3,	/* LCD Controller */
-	0,	/* DMA Controller */
-	2,	/* USB Device Port */
-	2,	/* USB Host port */
-	0,	/* Advanced Interrupt Controller (IRQ0) */
-	0,	/* Advanced Interrupt Controller (IRQ1) */
-};
-
-struct at91_init_soc __initdata at91cap9_soc = {
-	.map_io = at91cap9_map_io,
-	.default_irq_priority = at91cap9_default_irq_priority,
-	.ioremap_registers = at91cap9_ioremap_registers,
-	.register_clocks = at91cap9_register_clocks,
-	.init = at91cap9_initialize,
-};
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
deleted file mode 100644
index d298fb7cb210..000000000000
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ /dev/null
@@ -1,1273 +0,0 @@
-/*
- * arch/arm/mach-at91/at91cap9_devices.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
-#include <mach/at91cap9.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_UHP_BASE,
-		.end	= AT91CAP9_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_UHP,
-		.end	= AT91CAP9_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	if (cpu_is_at91cap9_revB())
-		irq_set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i], 0);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_data = *data;
-	platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_UDPHS_FIFO,
-		.end	= AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_BASE_UDPHS,
-		.end	= AT91CAP9_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= AT91CAP9_ID_UDPHS,
-		.end	= AT91CAP9_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] = {
-	EP("ep0", 0,   64, 1, 0, 0),
-	EP("ep1", 1, 1024, 3, 1, 1),
-	EP("ep2", 2, 1024, 3, 1, 1),
-	EP("ep3", 3, 1024, 2, 1, 1),
-	EP("ep4", 4, 1024, 2, 1, 1),
-	EP("ep5", 5, 1024, 2, 1, 0),
-	EP("ep6", 6, 1024, 2, 1, 0),
-	EP("ep7", 7, 1024, 2, 0, 0),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[8];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	if (cpu_is_at91cap9_revB()) {
-		irq_set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
-		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
-						  AT91_MATRIX_UDPHS_BYPASS_LOCK);
-	}
-	else
-		at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
-
-	/*
-	 * Invalid pins are 0 on AT91, but the usba driver is shared
-	 * with AVR32, which use negative values instead. Once/if
-	 * gpio_is_valid() is ported to AT91, revisit this code.
-	 */
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_EMAC,
-		.end	= AT91CAP9_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_EMAC,
-		.end	= AT91CAP9_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PB30, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PB29, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PC25, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PC26, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PC22, 0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PC23, 0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PC27, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PC20, 0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PC21, 0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PC24, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91cap9_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_MCI0,
-		.end	= AT91CAP9_BASE_MCI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_MCI0,
-		.end	= AT91CAP9_ID_MCI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_mmc0_device = {
-	.name		= "at91_mci",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc0_data,
-	},
-	.resource	= mmc0_resources,
-	.num_resources	= ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_MCI1,
-		.end	= AT91CAP9_BASE_MCI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_MCI1,
-		.end	= AT91CAP9_ID_MCI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_mmc1_device = {
-	.name		= "at91_mci",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc1_data,
-	},
-	.resource	= mmc1_resources,
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (gpio_is_valid(data->det_pin)) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (gpio_is_valid(data->wp_pin))
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (gpio_is_valid(data->vcc_pin))
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	if (mmc_id == 0) {		/* MCI0 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA2, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA0, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA3, 1);
-			at91_set_A_periph(AT91_PIN_PA4, 1);
-			at91_set_A_periph(AT91_PIN_PA5, 1);
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91cap9_mmc0_device);
-	} else {			/* MCI1 */
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA16, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA17, 1);
-
-		/* DAT0, maybe DAT1..DAT3 */
-		at91_set_A_periph(AT91_PIN_PA18, 1);
-		if (data->wire4) {
-			at91_set_A_periph(AT91_PIN_PA19, 1);
-			at91_set_A_periph(AT91_PIN_PA20, 1);
-			at91_set_A_periph(AT91_PIN_PA21, 1);
-		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91cap9_mmc1_device);
-	}
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_BASE_ECC,
-		.end	= AT91CAP9_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91cap9_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91cap9_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PB4,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PB5,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at91cap9_twi_device = {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB4, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PB4, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PB5, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PB5, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91cap9_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_TWI,
-		.end	= AT91CAP9_BASE_TWI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_TWI,
-		.end	= AT91CAP9_ID_TWI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_twi_device = {
-	.name		= "at91_i2c",
-	.id		= -1,
-	.resource	= twi_resources,
-	.num_resources	= ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI interface */
-	at91_set_B_periph(AT91_PIN_PB4, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PB4, 1);
-
-	at91_set_B_periph(AT91_PIN_PB5, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PB5, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at91cap9_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SPI0,
-		.end	= AT91CAP9_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SPI0,
-		.end	= AT91CAP9_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SPI1,
-		.end	= AT91CAP9_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SPI1,
-		.end	= AT91CAP9_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91cap9_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB12, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91cap9_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_TCB0,
-		.end	= AT91CAP9_BASE_TCB0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_TCB,
-		.end	= AT91CAP9_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91cap9_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91CAP9_BASE_RTT,
-		.end	= AT91CAP9_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91cap9_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
-	platform_device_register(&at91cap9_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91CAP9_BASE_WDT,
-		.end	= AT91CAP9_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91cap9_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91cap9_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if defined(CONFIG_ATMEL_PWM)
-static u32 pwm_mask;
-
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_PWMC,
-		.end	= AT91CAP9_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_PWMC,
-		.end	= AT91CAP9_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_pwm0_device = {
-	.name	= "atmel_pwm",
-	.id	= -1,
-	.dev	= {
-		.platform_data		= &pwm_mask,
-	},
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_A_periph(AT91_PIN_PB19, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PB8, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PC29, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PA11, 1);	/* enable PWM3 */
-
-	pwm_mask = mask;
-
-	platform_device_register(&at91cap9_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_AC97C,
-		.end	= AT91CAP9_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_AC97C,
-		.end	= AT91CAP9_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PA6, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PA7, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PA8, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PA9, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91cap9_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_info lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_LCDC_BASE,
-		.end	= AT91CAP9_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_LCDC,
-		.end	= AT91CAP9_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.name		= "atmel_lcdfb",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
-{
-	if (!data)
-		return;
-
-	if (cpu_is_at91cap9_revB())
-		irq_set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
-
-	at91_set_A_periph(AT91_PIN_PC1, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PC2, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PC3, 0);	/* LCDDEN */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PC6, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PC7, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PC8, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PC9, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PC10, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PC11, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PC15, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PC16, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PC17, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PC18, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PC19, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PC22, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PC23, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PC24, 0);	/* LCDD20 */
-	at91_set_A_periph(AT91_PIN_PC25, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PC26, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PC27, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SSC0,
-		.end	= AT91CAP9_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SSC0,
-		.end	= AT91CAP9_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_ssc0_device = {
-	.name	= "ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB0, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB1, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_SSC1,
-		.end	= AT91CAP9_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_SSC1,
-		.end	= AT91CAP9_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91cap9_ssc1_device = {
-	.name	= "ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PB6, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PB7, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PB8, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PB9, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PB10, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91CAP9_ID_SSC0:
-		pdev = &at91cap9_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91CAP9_ID_SSC1:
-		pdev = &at91cap9_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_DBGU,
-		.end	= AT91CAP9_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_US0,
-		.end	= AT91CAP9_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_US0,
-		.end	= AT91CAP9_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA22, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA23, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA24, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA25, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_US1,
-		.end	= AT91CAP9_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_US1,
-		.end	= AT91CAP9_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PD0, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PD1, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD7, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD8, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91CAP9_BASE_US2,
-		.end	= AT91CAP9_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91CAP9_ID_US2,
-		.end	= AT91CAP9_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91cap9_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PD2, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PD3, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PD5, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PD6, 0);	/* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91cap9_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91CAP9_ID_US0:
-			pdev = &at91cap9_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91CAP9_ID_US1:
-			pdev = &at91cap9_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91CAP9_ID_US2:
-			pdev = &at91cap9_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART) {
-		atmel_default_console_device = at91_uarts[portnr];
-		at91cap9_set_console_clock(at91_uarts[portnr]->id);
-	}
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 99c3174e24a2..0df1045311e4 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -289,13 +289,22 @@ static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
 	}
 };
 
+static void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
 static void at91rm9200_restart(char mode, const char *cmd)
 {
 	/*
 	 * Perform a hardware reset with the use of the Watchdog timer.
 	 */
-	at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
-	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
+	at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
+	at91_st_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
 /* --------------------------------------------------------------------
@@ -310,10 +319,13 @@ static void __init at91rm9200_map_io(void)
 
 static void __init at91rm9200_ioremap_registers(void)
 {
+	at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
+	at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
 }
 
 static void __init at91rm9200_initialize(void)
 {
+	arm_pm_idle = at91rm9200_idle;
 	arm_pm_restart = at91rm9200_restart;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 18bacec2b094..640520c04c46 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -21,6 +21,7 @@
 #include <mach/board.h>
 #include <mach/at91rm9200.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 
 #include "generic.h"
 
@@ -241,15 +242,15 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	data->chipselect = 4;		/* can only use EBI ChipSelect 4 */
 
 	/* CF takes over CS4, CS5, CS6 */
-	csa = at91_sys_read(AT91_EBI_CSA);
-	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
+	csa = at91_ramc_read(0, AT91_EBI_CSA);
+	at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
 
 	/*
 	 * Static memory controller timing adjustments.
 	 * REVISIT:  these timings are in terms of MCK cycles, so
 	 * when MCK changes (cpufreq etc) so must these values...
 	 */
-	at91_sys_write(AT91_SMC_CSR(4),
+	at91_ramc_write(0, AT91_SMC_CSR(4),
 				  AT91_SMC_ACSS_STD
 				| AT91_SMC_DBW_16
 				| AT91_SMC_BAT
@@ -407,11 +408,11 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 		return;
 
 	/* enable the address range of CS3 */
-	csa = at91_sys_read(AT91_EBI_CSA);
-	at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
+	csa = at91_ramc_read(0, AT91_EBI_CSA);
+	at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
 
 	/* set the bus interface characteristics */
-	at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
+	at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
 		| AT91_SMC_NWS_(5)
 		| AT91_SMC_TDF_(1)
 		| AT91_SMC_RWSETUP_(0)	/* tDS Data Set up Time 30 - ns */
@@ -1114,7 +1115,6 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index a028cdf8f974..dd7f782b0b91 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -43,9 +43,9 @@ static inline unsigned long read_CRTR(void)
 {
 	unsigned long x1, x2;
 
-	x1 = at91_sys_read(AT91_ST_CRTR);
+	x1 = at91_st_read(AT91_ST_CRTR);
 	do {
-		x2 = at91_sys_read(AT91_ST_CRTR);
+		x2 = at91_st_read(AT91_ST_CRTR);
 		if (x1 == x2)
 			break;
 		x1 = x2;
@@ -58,7 +58,7 @@ static inline unsigned long read_CRTR(void)
  */
 static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id)
 {
-	u32	sr = at91_sys_read(AT91_ST_SR) & irqmask;
+	u32	sr = at91_st_read(AT91_ST_SR) & irqmask;
 
 	/*
 	 * irqs should be disabled here, but as the irq is shared they are only
@@ -110,22 +110,22 @@ static void
 clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 {
 	/* Disable and flush pending timer interrupts */
-	at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
-	(void) at91_sys_read(AT91_ST_SR);
+	at91_st_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_ALMS);
+	at91_st_read(AT91_ST_SR);
 
 	last_crtr = read_CRTR();
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
 		/* PIT for periodic irqs; fixed rate of 1/HZ */
 		irqmask = AT91_ST_PITS;
-		at91_sys_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
+		at91_st_write(AT91_ST_PIMR, RM9200_TIMER_LATCH);
 		break;
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* ALM for oneshot irqs, set by next_event()
 		 * before 32 seconds have passed
 		 */
 		irqmask = AT91_ST_ALMS;
-		at91_sys_write(AT91_ST_RTAR, last_crtr);
+		at91_st_write(AT91_ST_RTAR, last_crtr);
 		break;
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
@@ -133,7 +133,7 @@ clkevt32k_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 		irqmask = 0;
 		break;
 	}
-	at91_sys_write(AT91_ST_IER, irqmask);
+	at91_st_write(AT91_ST_IER, irqmask);
 }
 
 static int
@@ -156,12 +156,12 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 	alm = read_CRTR();
 
 	/* Cancel any pending alarm; flush any pending IRQ */
-	at91_sys_write(AT91_ST_RTAR, alm);
-	(void) at91_sys_read(AT91_ST_SR);
+	at91_st_write(AT91_ST_RTAR, alm);
+	at91_st_read(AT91_ST_SR);
 
 	/* Schedule alarm by writing RTAR. */
 	alm += delta;
-	at91_sys_write(AT91_ST_RTAR, alm);
+	at91_st_write(AT91_ST_RTAR, alm);
 
 	return status;
 }
@@ -175,15 +175,24 @@ static struct clock_event_device clkevt = {
 	.set_mode	= clkevt32k_mode,
 };
 
+void __iomem *at91_st_base;
+
+void __init at91rm9200_ioremap_st(u32 addr)
+{
+	at91_st_base = ioremap(addr, 256);
+	if (!at91_st_base)
+		panic("Impossible to ioremap ST\n");
+}
+
 /*
  * ST (system timer) module supports both clockevents and clocksource.
  */
 void __init at91rm9200_timer_init(void)
 {
 	/* Disable all timer interrupts, and clear any pending ones */
-	at91_sys_write(AT91_ST_IDR,
+	at91_st_write(AT91_ST_IDR,
 		AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
-	(void) at91_sys_read(AT91_ST_SR);
+	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
 	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
@@ -192,7 +201,7 @@ void __init at91rm9200_timer_init(void)
 	 * directly for the clocksource and all clockevents, after adjusting
 	 * its prescaler from the 1 Hz default.
 	 */
-	at91_sys_write(AT91_ST_RTMR, 1);
+	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
 	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d4036ba43612..4ade265be805 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -309,27 +310,27 @@ static void __init at91sam9xe_map_io(void)
 
 static void __init at91sam9260_map_io(void)
 {
-	if (cpu_is_at91sam9xe()) {
+	if (cpu_is_at91sam9xe())
 		at91sam9xe_map_io();
-	} else if (cpu_is_at91sam9g20()) {
-		at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE);
-		at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE);
-	} else {
-		at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE);
-		at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE);
-	}
+	else if (cpu_is_at91sam9g20())
+		at91_init_sram(0, AT91SAM9G20_SRAM_BASE, AT91SAM9G20_SRAM_SIZE);
+	else
+		at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE);
 }
 
 static void __init at91sam9260_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
 	at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
+	at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512);
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
+	at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
 }
 
 static void __init at91sam9260_initialize(void)
 {
+	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 642ccb6d26b2..df487ce83c5e 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -21,6 +21,7 @@
 #include <mach/cpu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9260_matrix.h>
+#include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 
 #include "generic.h"
@@ -422,8 +423,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (gpio_is_valid(data->enable_pin))
@@ -717,18 +718,42 @@ static struct resource rtt_resources[] = {
 		.start	= AT91SAM9260_BASE_RTT,
 		.end	= AT91SAM9260_BASE_RTT + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
-	}
+	}, {
+		.flags	= IORESOURCE_MEM,
+	},
 };
 
 static struct platform_device at91sam9260_rtt_device = {
 	.name		= "at91_rtt",
 	.id		= 0,
 	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
 
+
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+	at91sam9260_rtt_device.name = "rtc-at91sam9";
+	/*
+	 * The second resource is needed:
+	 * GPBR will serve as the storage for RTC time offset
+	 */
+	at91sam9260_rtt_device.num_resources = 2;
+	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
+				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+	rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+	/* Only one resource is needed: RTT not used as RTC */
+	at91sam9260_rtt_device.num_resources = 1;
+}
+#endif
+
 static void __init at91_add_device_rtt(void)
 {
+	at91_add_device_rtt_rtc();
 	platform_device_register(&at91sam9260_rtt_device);
 }
 
@@ -1139,7 +1164,6 @@ static inline void configure_usart5_pins(void)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
@@ -1265,7 +1289,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
 
 	switch (data->chipselect) {
 	case 4:
@@ -1288,7 +1312,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 		return;
 	}
 
-	at91_sys_write(AT91_MATRIX_EBICSA, csa);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa);
 
 	if (gpio_is_valid(data->rst_pin)) {
 		at91_set_multi_drive(data->rst_pin, 0);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 023c2ff138df..684c5dfd92ac 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -282,12 +283,15 @@ static void __init at91sam9261_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
 	at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
+	at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512);
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
+	at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
 }
 
 static void __init at91sam9261_initialize(void)
 {
+	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index fc59cbdb0e3c..3bd10ce4854e 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -24,6 +24,7 @@
 #include <mach/board.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91sam9261_matrix.h>
+#include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 
 #include "generic.h"
@@ -236,8 +237,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (gpio_is_valid(data->enable_pin))
@@ -603,6 +604,8 @@ static struct resource rtt_resources[] = {
 		.start	= AT91SAM9261_BASE_RTT,
 		.end	= AT91SAM9261_BASE_RTT + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -610,11 +613,32 @@ static struct platform_device at91sam9261_rtt_device = {
 	.name		= "at91_rtt",
 	.id		= 0,
 	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
 
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+	at91sam9261_rtt_device.name = "rtc-at91sam9";
+	/*
+	 * The second resource is needed:
+	 * GPBR will serve as the storage for RTC time offset
+	 */
+	at91sam9261_rtt_device.num_resources = 2;
+	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
+				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+	rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+	/* Only one resource is needed: RTT not used as RTC */
+	at91sam9261_rtt_device.num_resources = 1;
+}
+#endif
+
 static void __init at91_add_device_rtt(void)
 {
+	at91_add_device_rtt_rtc();
 	platform_device_register(&at91sam9261_rtt_device);
 }
 
@@ -991,7 +1015,6 @@ static inline void configure_usart2_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 75e876c258af..0b4fa5a7f685 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -12,6 +12,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -302,13 +303,17 @@ static void __init at91sam9263_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
 	at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
+	at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
+	at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
 	at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
+	at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
 }
 
 static void __init at91sam9263_initialize(void)
 {
+	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 7b46b2787022..7792de5b83d4 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -23,6 +23,7 @@
 #include <mach/board.h>
 #include <mach/at91sam9263.h>
 #include <mach/at91sam9263_matrix.h>
+#include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 
 #include "generic.h"
@@ -409,7 +410,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	 * we assume SMC timings are configured by board code,
 	 * except True IDE where timings are controlled by driver
 	 */
-	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
 	switch (data->chipselect) {
 	case 4:
 		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
@@ -428,7 +429,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 		       data->chipselect);
 		return;
 	}
-	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+	at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
 
 	if (gpio_is_valid(data->det_pin)) {
 		at91_set_gpio_input(data->det_pin, 1);
@@ -496,8 +497,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
-	at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+	csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
+	at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (gpio_is_valid(data->enable_pin))
@@ -891,7 +892,8 @@ static struct platform_device at91sam9263_isi_device = {
 	.num_resources	= ARRAY_SIZE(isi_resources),
 };
 
-void __init at91_add_device_isi(void)
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck)
 {
 	at91_set_A_periph(AT91_PIN_PE0, 0);	/* ISI_D0 */
 	at91_set_A_periph(AT91_PIN_PE1, 0);	/* ISI_D1 */
@@ -904,14 +906,20 @@ void __init at91_add_device_isi(void)
 	at91_set_A_periph(AT91_PIN_PE8, 0);	/* ISI_PCK */
 	at91_set_A_periph(AT91_PIN_PE9, 0);	/* ISI_HSYNC */
 	at91_set_A_periph(AT91_PIN_PE10, 0);	/* ISI_VSYNC */
-	at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
 	at91_set_B_periph(AT91_PIN_PE12, 0);	/* ISI_PD8 */
 	at91_set_B_periph(AT91_PIN_PE13, 0);	/* ISI_PD9 */
 	at91_set_B_periph(AT91_PIN_PE14, 0);	/* ISI_PD10 */
 	at91_set_B_periph(AT91_PIN_PE15, 0);	/* ISI_PD11 */
+
+	if (use_pck_as_mck) {
+		at91_set_B_periph(AT91_PIN_PE11, 0);	/* ISI_MCK (PCK3) */
+
+		/* TODO: register the PCK for ISI_MCK and set its parent */
+	}
 }
 #else
-void __init at91_add_device_isi(void) {}
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck) {}
 #endif
 
 
@@ -959,6 +967,8 @@ static struct resource rtt0_resources[] = {
 		.start	= AT91SAM9263_BASE_RTT0,
 		.end	= AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -966,7 +976,6 @@ static struct platform_device at91sam9263_rtt0_device = {
 	.name		= "at91_rtt",
 	.id		= 0,
 	.resource	= rtt0_resources,
-	.num_resources	= ARRAY_SIZE(rtt0_resources),
 };
 
 static struct resource rtt1_resources[] = {
@@ -974,6 +983,8 @@ static struct resource rtt1_resources[] = {
 		.start	= AT91SAM9263_BASE_RTT1,
 		.end	= AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -981,11 +992,53 @@ static struct platform_device at91sam9263_rtt1_device = {
 	.name		= "at91_rtt",
 	.id		= 1,
 	.resource	= rtt1_resources,
-	.num_resources	= ARRAY_SIZE(rtt1_resources),
 };
 
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+	struct platform_device *pdev;
+	struct resource *r;
+
+	switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
+	case 0:
+		/*
+		 * The second resource is needed only for the chosen RTT:
+		 * GPBR will serve as the storage for RTC time offset
+		 */
+		at91sam9263_rtt0_device.num_resources = 2;
+		at91sam9263_rtt1_device.num_resources = 1;
+		pdev = &at91sam9263_rtt0_device;
+		r = rtt0_resources;
+		break;
+	case 1:
+		at91sam9263_rtt0_device.num_resources = 1;
+		at91sam9263_rtt1_device.num_resources = 2;
+		pdev = &at91sam9263_rtt1_device;
+		r = rtt1_resources;
+		break;
+	default:
+		pr_err("at91sam9263: only supports 2 RTT (%d)\n",
+		       CONFIG_RTC_DRV_AT91SAM9_RTT);
+		return;
+	}
+
+	pdev->name = "rtc-at91sam9";
+	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+	r[1].end = r[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+	/* Only one resource is needed: RTT not used as RTC */
+	at91sam9263_rtt0_device.num_resources = 1;
+	at91sam9263_rtt1_device.num_resources = 1;
+}
+#endif
+
 static void __init at91_add_device_rtt(void)
 {
+	at91_add_device_rtt_rtc();
 	platform_device_register(&at91sam9263_rtt0_device);
 	platform_device_register(&at91sam9263_rtt1_device);
 }
@@ -1371,7 +1424,6 @@ static inline void configure_usart2_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index 518e42377171..7af2e108b8a0 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -15,16 +15,17 @@
 
 #include <linux/linkage.h>
 #include <mach/hardware.h>
-#include <mach/at91sam9_sdramc.h>
+#include <mach/at91_ramc.h>
 #include <mach/at91_rstc.h>
 
 			.arm
 
 			.globl	at91sam9_alt_restart
 
-at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
-			ldr	r1, =at91_rstc_base
-			ldr	r1, [r1]
+at91sam9_alt_restart:	ldr	r0, =at91_ramc_base		@ preload constants
+			ldr	r0, [r0]
+			ldr	r4, =at91_rstc_base
+			ldr	r1, [r4]
 
 			mov	r2, #1
 			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
@@ -37,6 +38,3 @@ at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
 
 			b	.
-
-.at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1cb6a96b1c1e..a41622ea61b8 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -331,12 +331,16 @@ static void __init at91sam9g45_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
 	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
+	at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
+	at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
+	at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
 }
 
 static void __init at91sam9g45_initialize(void)
 {
+	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index b7582dd10dc3..410829532aab 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -14,6 +14,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/gpio.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
@@ -24,11 +25,15 @@
 #include <mach/board.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
+#include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at_hdmac.h>
 #include <mach/atmel-mci.h>
 
+#include <media/atmel-isi.h>
+
 #include "generic.h"
+#include "clock.h"
 
 
 /* --------------------------------------------------------------------
@@ -38,10 +43,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 8,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9G45_BASE_DMA,
@@ -56,12 +57,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9g45_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -69,9 +69,15 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
-	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
-	platform_device_register(&at_hdmac_device);
+#if defined(CONFIG_OF)
+	struct device_node *of_node =
+		of_find_node_by_name(NULL, "dma-controller");
+
+	if (of_node)
+		of_node_put(of_node);
+	else
+#endif
+		platform_device_register(&at_hdmac_device);
 }
 #else
 void __init at91_add_device_hdmac(void) {}
@@ -552,8 +558,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (gpio_is_valid(data->enable_pin))
@@ -869,6 +875,96 @@ void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Image Sensor Interface
+ * -------------------------------------------------------------------- */
+#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
+static u64 isi_dmamask = DMA_BIT_MASK(32);
+static struct isi_platform_data isi_data;
+
+struct resource isi_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_ISI,
+		.end	= AT91SAM9G45_BASE_ISI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_ISI,
+		.end	= AT91SAM9G45_ID_ISI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_isi_device = {
+	.name		= "atmel_isi",
+	.id		= 0,
+	.dev		= {
+			.dma_mask		= &isi_dmamask,
+			.coherent_dma_mask	= DMA_BIT_MASK(32),
+			.platform_data		= &isi_data,
+	},
+	.resource	= isi_resources,
+	.num_resources	= ARRAY_SIZE(isi_resources),
+};
+
+static struct clk_lookup isi_mck_lookups[] = {
+	CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
+};
+
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck)
+{
+	struct clk *pck;
+	struct clk *parent;
+
+	if (!data)
+		return;
+	isi_data = *data;
+
+	at91_set_A_periph(AT91_PIN_PB20, 0);	/* ISI_D0 */
+	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ISI_D1 */
+	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ISI_D2 */
+	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ISI_D3 */
+	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ISI_D4 */
+	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ISI_D5 */
+	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ISI_D6 */
+	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ISI_D7 */
+	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ISI_PCK */
+	at91_set_A_periph(AT91_PIN_PB30, 0);	/* ISI_HSYNC */
+	at91_set_A_periph(AT91_PIN_PB29, 0);	/* ISI_VSYNC */
+	at91_set_B_periph(AT91_PIN_PB8, 0);	/* ISI_PD8 */
+	at91_set_B_periph(AT91_PIN_PB9, 0);	/* ISI_PD9 */
+	at91_set_B_periph(AT91_PIN_PB10, 0);	/* ISI_PD10 */
+	at91_set_B_periph(AT91_PIN_PB11, 0);	/* ISI_PD11 */
+
+	platform_device_register(&at91sam9g45_isi_device);
+
+	if (use_pck_as_mck) {
+		at91_set_B_periph(AT91_PIN_PB31, 0);	/* ISI_MCK (PCK1) */
+
+		pck = clk_get(NULL, "pck1");
+		parent = clk_get(NULL, "plla");
+
+		BUG_ON(IS_ERR(pck) || IS_ERR(parent));
+
+		if (clk_set_parent(pck, parent)) {
+			pr_err("Failed to set PCK's parent\n");
+		} else {
+			/* Register PCK as ISI_MCK */
+			isi_mck_lookups[0].clk = pck;
+			clkdev_add_table(isi_mck_lookups,
+					ARRAY_SIZE(isi_mck_lookups));
+		}
+
+		clk_put(pck);
+		clk_put(parent);
+	}
+}
+#else
+void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck) {}
+#endif
+
 
 /* --------------------------------------------------------------------
  *  LCD Controller
@@ -1098,6 +1194,8 @@ static struct resource rtt_resources[] = {
 		.start	= AT91SAM9G45_BASE_RTT,
 		.end	= AT91SAM9G45_BASE_RTT + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -1105,11 +1203,32 @@ static struct platform_device at91sam9g45_rtt_device = {
 	.name		= "at91_rtt",
 	.id		= 0,
 	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
 
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+	at91sam9g45_rtt_device.name = "rtc-at91sam9";
+	/*
+	 * The second resource is needed:
+	 * GPBR will serve as the storage for RTC time offset
+	 */
+	at91sam9g45_rtt_device.num_resources = 2;
+	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
+				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+	rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+	/* Only one resource is needed: RTT not used as RTC */
+	at91sam9g45_rtt_device.num_resources = 1;
+}
+#endif
+
 static void __init at91_add_device_rtt(void)
 {
+	at91_add_device_rtt_rtc();
 	platform_device_register(&at91sam9g45_rtt_device);
 }
 
@@ -1564,7 +1683,6 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
index 0468be10980b..9d457182c86c 100644
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -12,7 +12,7 @@
 
 #include <linux/linkage.h>
 #include <mach/hardware.h>
-#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91_ramc.h>
 #include <mach/at91_rstc.h>
 
 			.arm
@@ -20,9 +20,10 @@
 			.globl	at91sam9g45_restart
 
 at91sam9g45_restart:
-			ldr	r0, .at91_va_base_sdramc0	@ preload constants
-			ldr	r1, =at91_rstc_base
-			ldr	r1, [r1]
+			ldr	r5, =at91_ramc_base		@ preload constants
+			ldr	r0, [r5]
+			ldr	r4, =at91_rstc_base
+			ldr	r1, [r4]
 
 			mov	r2, #1
 			mov	r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
@@ -35,6 +36,3 @@ at91sam9g45_restart:
 			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
 
 			b	.
-
-.at91_va_base_sdramc0:
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d2c91a841cb8..63d9372eb18e 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -11,6 +11,7 @@
 
 #include <linux/module.h>
 
+#include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -287,12 +288,15 @@ static void __init at91sam9rl_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
 	at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
+	at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
+	at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
 }
 
 static void __init at91sam9rl_initialize(void)
 {
+	arm_pm_idle = at91sam9_idle;
 	arm_pm_restart = at91sam9_alt_restart;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 61908dce9784..eda72e83037d 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -20,6 +20,7 @@
 #include <mach/board.h>
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
+#include <mach/at91_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at_hdmac.h>
 
@@ -33,10 +34,6 @@
 #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
 static u64 hdmac_dmamask = DMA_BIT_MASK(32);
 
-static struct at_dma_platform_data atdma_pdata = {
-	.nr_channels	= 2,
-};
-
 static struct resource hdmac_resources[] = {
 	[0] = {
 		.start	= AT91SAM9RL_BASE_DMA,
@@ -51,12 +48,11 @@ static struct resource hdmac_resources[] = {
 };
 
 static struct platform_device at_hdmac_device = {
-	.name		= "at_hdmac",
+	.name		= "at91sam9rl_dma",
 	.id		= -1,
 	.dev		= {
 				.dma_mask		= &hdmac_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &atdma_pdata,
 	},
 	.resource	= hdmac_resources,
 	.num_resources	= ARRAY_SIZE(hdmac_resources),
@@ -64,7 +60,6 @@ static struct platform_device at_hdmac_device = {
 
 void __init at91_add_device_hdmac(void)
 {
-	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
 	platform_device_register(&at_hdmac_device);
 }
 #else
@@ -271,8 +266,8 @@ void __init at91_add_device_nand(struct atmel_nand_data *data)
 	if (!data)
 		return;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
 
 	/* enable pin */
 	if (gpio_is_valid(data->enable_pin))
@@ -688,6 +683,8 @@ static struct resource rtt_resources[] = {
 		.start	= AT91SAM9RL_BASE_RTT,
 		.end	= AT91SAM9RL_BASE_RTT + SZ_16 - 1,
 		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
 	}
 };
 
@@ -695,11 +692,32 @@ static struct platform_device at91sam9rl_rtt_device = {
 	.name		= "at91_rtt",
 	.id		= 0,
 	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
 };
 
+#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
+static void __init at91_add_device_rtt_rtc(void)
+{
+	at91sam9rl_rtt_device.name = "rtc-at91sam9";
+	/*
+	 * The second resource is needed:
+	 * GPBR will serve as the storage for RTC time offset
+	 */
+	at91sam9rl_rtt_device.num_resources = 2;
+	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
+				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
+	rtt_resources[1].end = rtt_resources[1].start + 3;
+}
+#else
+static void __init at91_add_device_rtt_rtc(void)
+{
+	/* Only one resource is needed: RTT not used as RTC */
+	at91sam9rl_rtt_device.num_resources = 1;
+}
+#endif
+
 static void __init at91_add_device_rtt(void)
 {
+	at91_add_device_rtt_rtc();
 	platform_device_register(&at91sam9rl_rtt_device);
 }
 
@@ -1134,7 +1152,6 @@ static inline void configure_usart3_pins(unsigned pins)
 }
 
 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
 
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
new file mode 100644
index 000000000000..d17d4262665b
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -0,0 +1,370 @@
+/*
+ *  Chip-specific setup code for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2010-2012 Atmel Corporation.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/irq.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/at91sam9x5.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
+#include <mach/board.h>
+
+#include "soc.h"
+#include "generic.h"
+#include "clock.h"
+#include "sam9_smc.h"
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioAB_clk = {
+	.name		= "pioAB_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOAB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCD_clk = {
+	.name		= "pioCD_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_PIOCD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk smd_clk = {
+	.name		= "smd_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SMD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* USART3 clock - Only for sam9g25/sam9x25 */
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_USART3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi2_clk = {
+	.name		= "twi2_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TWI2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart0_clk = {
+	.name		= "uart0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UART0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uart1_clk = {
+	.name		= "uart1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UART1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb0_clk = {
+	.name		= "tcb0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwm_clk = {
+	.name		= "pwm_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_PWM,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk adc_clk = {
+	.name		= "adc_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_ADC,
+	.type	= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma0_clk = {
+	.name		= "dma0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA0,
+	.type	= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma1_clk = {
+	.name		= "dma1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_DMA1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk uhphs_clk = {
+	.name		= "uhphs_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UHPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
+static struct clk macb0_clk = {
+	.name		= "pclk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* isi clock - Only for sam9g25 */
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* emac1 clock - Only for sam9x25 */
+static struct clk macb1_clk = {
+	.name		= "pclk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_EMAC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc_clk = {
+	.name		= "ssc_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_SSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* can0 clock - Only for sam9x35 */
+static struct clk can0_clk = {
+	.name		= "can0_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+/* can1 clock - Only for sam9x35 */
+static struct clk can1_clk = {
+	.name		= "can1_clk",
+	.pmc_mask	= 1 << AT91SAM9X5_ID_CAN1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioAB_clk,
+	&pioCD_clk,
+	&smd_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&twi2_clk,
+	&mmc0_clk,
+	&spi0_clk,
+	&spi1_clk,
+	&uart0_clk,
+	&uart1_clk,
+	&tcb0_clk,
+	&pwm_clk,
+	&adc_clk,
+	&dma0_clk,
+	&dma1_clk,
+	&uhphs_clk,
+	&udphs_clk,
+	&mmc1_clk,
+	&ssc_clk,
+	// irq0
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+	/* lookup table for DT entries */
+	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+	CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
+	CLKDEV_CON_ID("pioA", &pioAB_clk),
+	CLKDEV_CON_ID("pioB", &pioAB_clk),
+	CLKDEV_CON_ID("pioC", &pioCD_clk),
+	CLKDEV_CON_ID("pioD", &pioCD_clk),
+	/* additional fake clock for macb_hclk */
+	CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
+	CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9x5_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+
+	if (cpu_is_at91sam9g25()
+	|| cpu_is_at91sam9x25())
+		clk_register(&usart3_clk);
+
+	if (cpu_is_at91sam9g25()
+	|| cpu_is_at91sam9x25()
+	|| cpu_is_at91sam9g35()
+	|| cpu_is_at91sam9x35())
+		clk_register(&macb0_clk);
+
+	if (cpu_is_at91sam9g15()
+	|| cpu_is_at91sam9g35()
+	|| cpu_is_at91sam9x35())
+		clk_register(&lcdc_clk);
+
+	if (cpu_is_at91sam9g25())
+		clk_register(&isi_clk);
+
+	if (cpu_is_at91sam9x25())
+		clk_register(&macb1_clk);
+
+	if (cpu_is_at91sam9x25()
+	|| cpu_is_at91sam9x35()) {
+		clk_register(&can0_clk);
+		clk_register(&can1_clk);
+	}
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9x5 processor initialization
+ * -------------------------------------------------------------------- */
+
+static void __init at91sam9x5_map_io(void)
+{
+	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
+}
+
+static void __init at91sam9x5_ioremap_registers(void)
+{
+	if (of_at91sam926x_pit_init() < 0)
+		panic("Impossible to find PIT\n");
+	at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
+}
+
+void __init at91sam9x5_initialize(void)
+{
+	arm_pm_restart = at91sam9g45_restart;
+	at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
+
+	/* Register GPIO subsystem (using DT) */
+	at91_gpio_init(NULL, 0);
+}
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9x5 devices (temporary before modification of code)
+ * -------------------------------------------------------------------- */
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A and B */
+	1,	/* Parallel IO Controller C and D */
+	4,	/* Soft Modem */
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	6,	/* Two-Wire Interface 2 */
+	0,	/* Multimedia Card Interface 0 */
+	5,	/* Serial Peripheral Interface 0 */
+	5,	/* Serial Peripheral Interface 1 */
+	5,	/* UART 0 */
+	5,	/* UART 1 */
+	0,	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+	0,	/* Pulse Width Modulation Controller */
+	0,	/* ADC Controller */
+	0,	/* DMA Controller 0 */
+	0,	/* DMA Controller 1 */
+	2,	/* USB Host High Speed port */
+	2,	/* USB Device High speed port */
+	3,	/* Ethernet MAC 0 */
+	3,	/* LDC Controller or Image Sensor Interface */
+	0,	/* Multimedia Card Interface 1 */
+	3,	/* Ethernet MAC 1 */
+	4,	/* Synchronous Serial Interface */
+	4,	/* CAN Controller 0 */
+	4,	/* CAN Controller 1 */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+};
+
+struct at91_init_soc __initdata at91sam9x5_soc = {
+	.map_io = at91sam9x5_map_io,
+	.default_irq_priority = at91sam9x5_default_irq_priority,
+	.ioremap_registers = at91sam9x5_ioremap_registers,
+	.register_clocks = at91sam9x5_register_clocks,
+	.init = at91sam9x5_initialize,
+};
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 56ba3bd035ae..5400a1d65035 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <asm/proc-fns.h>
 #include <asm/mach/arch.h>
 #include <mach/at91x40.h>
 #include <mach/at91_st.h>
@@ -37,8 +38,19 @@ unsigned long clk_get_rate(struct clk *clk)
 	return AT91X40_MASTER_CLOCK;
 }
 
+static void at91x40_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	__raw_writel(AT91_PS_CR_CPU, AT91_PS_CR);
+	cpu_do_idle();
+}
+
 void __init at91x40_initialize(unsigned long main_clock)
 {
+	arm_pm_idle = at91x40_idle;
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
 			| (1 << AT91X40_ID_IRQ2);
 }
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index dfff2895f4b2..6ca680a1d5d1 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -28,6 +28,12 @@
 #include <asm/mach/time.h>
 #include <mach/at91_tc.h>
 
+#define at91_tc_read(field) \
+	__raw_readl(AT91_TC + field)
+
+#define at91_tc_write(field, value) \
+	__raw_writel(value, AT91_TC + field);
+
 /*
  *	3 counter/timer units present.
  */
@@ -37,12 +43,12 @@
 
 static unsigned long at91x40_gettimeoffset(void)
 {
-	return (at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+	return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
 }
 
 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
 {
-	at91_sys_read(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_SR);
+	at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
 	timer_tick();
 	return IRQ_HANDLED;
 }
@@ -57,20 +63,20 @@ void __init at91x40_timer_init(void)
 {
 	unsigned int v;
 
-	at91_sys_write(AT91_TC + AT91_TC_BCR, 0);
-	v = at91_sys_read(AT91_TC + AT91_TC_BMR);
+	at91_tc_write(AT91_TC_BCR, 0);
+	v = at91_tc_read(AT91_TC_BMR);
 	v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
-	at91_sys_write(AT91_TC + AT91_TC_BMR, v);
+	at91_tc_write(AT91_TC_BMR, v);
 
-	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
-	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
-	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
-	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
-	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
+	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
+	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
+	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
+	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
+	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
 
 	setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
 
-	at91_sys_write(AT91_TC + AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
+	at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
 }
 
 struct sys_timer at91x40_timer = {
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
deleted file mode 100644
index ac3de4f7c31d..000000000000
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-cap9adk.c
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/board.h>
-#include <mach/at91cap9_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init cap9adk_init_early(void)
-{
-	/* Initialize processor: 12 MHz crystal */
-	at91_initialize(12000000);
-
-	/* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */
-	at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11);
-	/* ... POWER LED always on */
-	at91_set_gpio_output(AT91_PIN_PC29, 1);
-
-	/* Setup the serial ports and console */
-	at91_register_uart(0, 0, 0);		/* DBGU = ttyS0 */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cap9adk_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata cap9adk_usba_udc_data = {
-	.vbus_pin	= AT91_PIN_PB31,
-};
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-	return !at91_get_gpio_value(AT91_PIN_PC4);	/* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-	.model			= 7843,
-	.x_min			= 150,
-	.x_max			= 3830,
-	.y_min			= 190,
-	.y_max			= 3830,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 450,
-	.y_plate_ohms		= 250,
-	.pressure_max		= 15000,
-	.debounce_max		= 1,
-	.debounce_rep		= 0,
-	.debounce_tol		= (~0),
-	.get_pendown_state	= ads7843_pendown_state,
-};
-
-static void __init cap9adk_add_device_ts(void)
-{
-	at91_set_gpio_input(AT91_PIN_PC4, 1);	/* Touchscreen PENIRQ */
-	at91_set_gpio_input(AT91_PIN_PC5, 1);	/* Touchscreen BUSY */
-}
-#else
-static void __init cap9adk_add_device_ts(void) {}
-#endif
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info cap9adk_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	{
-		.modalias	= "ads7846",
-		.chip_select	= 3,		/* can be 2 or 3, depending on J2 jumper */
-		.max_speed_hz	= 125000 * 26,	/* (max sample rate @ 3V) * (cmd + data + overhead) */
-		.bus_num	= 0,
-		.platform_data	= &ads_info,
-		.irq		= AT91_PIN_PC4,
-	},
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata cap9adk_mmc_data = {
-	.wire4		= 1,
-	.det_pin	= -EINVAL,
-	.wp_pin		= -EINVAL,
-	.vcc_pin	= -EINVAL,
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cap9adk_macb_data = {
-	.phy_irq_pin	= -EINVAL,
-	.is_rmii	= 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata cap9adk_nand_partitions[] = {
-	{
-		.name	= "NAND partition",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata cap9adk_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-	.det_pin	= -EINVAL,
-	.rdy_pin	= -EINVAL,
-	.enable_pin	= AT91_PIN_PD15,
-	.parts		= cap9adk_nand_partitions,
-	.num_parts	= ARRAY_SIZE(cap9adk_nand_partitions),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
-	.ncs_read_setup		= 1,
-	.nrd_setup		= 2,
-	.ncs_write_setup	= 1,
-	.nwe_setup		= 2,
-
-	.ncs_read_pulse		= 6,
-	.nrd_pulse		= 4,
-	.ncs_write_pulse	= 6,
-	.nwe_pulse		= 4,
-
-	.read_cycle		= 8,
-	.write_cycle		= 8,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 1,
-};
-
-static void __init cap9adk_add_device_nand(void)
-{
-	unsigned long csa;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
-	cap9adk_nand_data.bus_width_16 = board_have_nand_16bit();
-	/* setup bus-width (8 or 16) */
-	if (cap9adk_nand_data.bus_width_16)
-		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(0, 3, &cap9adk_nand_smc_config);
-
-	at91_add_device_nand(&cap9adk_nand_data);
-}
-
-
-/*
- * NOR flash
- */
-static struct mtd_partition cap9adk_nor_partitions[] = {
-	{
-		.name		= "NOR partition",
-		.offset		= 0,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data cap9adk_nor_data = {
-	.width		= 2,
-	.parts		= cap9adk_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(cap9adk_nor_partitions),
-};
-
-#define NOR_BASE	AT91_CHIPSELECT_0
-#define NOR_SIZE	SZ_8M
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= NOR_BASE,
-		.end	= NOR_BASE + NOR_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device cap9adk_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &cap9adk_nor_data,
-	},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata cap9adk_nor_smc_config = {
-	.ncs_read_setup		= 2,
-	.nrd_setup		= 4,
-	.ncs_write_setup	= 2,
-	.nwe_setup		= 4,
-
-	.ncs_read_pulse		= 10,
-	.nrd_pulse		= 8,
-	.ncs_write_pulse	= 10,
-	.nwe_pulse		= 8,
-
-	.read_cycle		= 16,
-	.write_cycle		= 16,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
-	.tdf_cycles		= 1,
-};
-
-static __init void cap9adk_add_device_nor(void)
-{
-	unsigned long csa;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
-	/* configure chip-select 0 (NOR) */
-	sam9_smc_configure(0, 0, &cap9adk_nor_smc_config);
-
-	platform_device_register(&cap9adk_nor_flash);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-	{
-	        .name           = "TX09D50VM1CCA @ 60",
-		.refresh	= 60,
-		.xres		= 240,		.yres		= 320,
-		.pixclock	= KHZ2PICOS(4965),
-
-		.left_margin	= 1,		.right_margin	= 33,
-		.upper_margin	= 1,		.lower_margin	= 0,
-		.hsync_len	= 5,		.vsync_len	= 1,
-
-		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-		.vmode		= FB_VMODE_NONINTERLACED,
-	},
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-	.manufacturer	= "HIT",
-	.monitor        = "TX09D70VM1CCA",
-
-	.modedb		= at91_tft_vga_modes,
-	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
-	.hfmin		= 15000,
-	.hfmax		= 64000,
-	.vfmin		= 50,
-	.vfmax		= 150,
-};
-
-#define AT91CAP9_DEFAULT_LCDCON2 	(ATMEL_LCDC_MEMOR_LITTLE \
-					| ATMEL_LCDC_DISTYPE_TFT    \
-					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-	if (on)
-		at91_set_gpio_value(AT91_PIN_PC0, 0);	/* power up */
-	else
-		at91_set_gpio_value(AT91_PIN_PC0, 1);	/* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data = {
-	.default_bpp			= 16,
-	.default_dmacon			= ATMEL_LCDC_DMAEN,
-	.default_lcdcon2		= AT91CAP9_DEFAULT_LCDCON2,
-	.default_monspecs		= &at91fb_default_monspecs,
-	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
-	.guard_time			= 1,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata cap9adk_lcdc_data;
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data cap9adk_ac97_data = {
-	.reset_pin	= -EINVAL,
-};
-
-
-static void __init cap9adk_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&cap9adk_usbh_data);
-	/* USB HS */
-	at91_add_device_usba(&cap9adk_usba_udc_data);
-	/* SPI */
-	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
-	/* Touchscreen */
-	cap9adk_add_device_ts();
-	/* MMC */
-	at91_add_device_mmc(1, &cap9adk_mmc_data);
-	/* Ethernet */
-	at91_add_device_eth(&cap9adk_macb_data);
-	/* NAND */
-	cap9adk_add_device_nand();
-	/* NOR Flash */
-	cap9adk_add_device_nor();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* LCD Controller */
-	at91_add_device_lcdc(&cap9adk_lcdc_data);
-	/* AC97 */
-	at91_add_device_ac97(&cap9adk_ac97_data);
-}
-
-MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
-	/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= cap9adk_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= cap9adk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 9ab3d1ea326d..989e1c5a9ca0 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -43,6 +43,7 @@
 #include <mach/board.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91sam9260_matrix.h>
+#include <mach/at91_matrix.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
@@ -238,8 +239,8 @@ static __init void cpu9krea_add_device_nor(void)
 {
 	unsigned long csa;
 
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
+	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
+	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
 
 	/* configure chip-select 0 (NOR) */
 	sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 368e1427ad99..e094cc81fe25 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -38,6 +38,7 @@
 
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index bb6b434ec0c1..08c8ad8609b7 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -38,12 +38,6 @@ static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91_initialize(12000000);
-
-	/* DGBU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
 }
 
 /* det_pin is not connected */
@@ -109,6 +103,7 @@ static void __init at91_dt_device_init(void)
 
 static const char *at91_dt_board_compat[] __initdata = {
 	"atmel,at91sam9m10g45ek",
+	"atmel,at91sam9x5ek",
 	"calao,usb-a9g20",
 	NULL
 };
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 07ef35b0ec2c..f23aabef8551 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -26,6 +26,7 @@
 
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
@@ -110,7 +111,7 @@ static void __init eco920_board_init(void)
 	at91_add_device_mmc(0, &eco920_mmc_data);
 	platform_device_register(&eco920_flash);
 
-	at91_sys_write(AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
+	at91_ramc_write(0, AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
 				| AT91_SMC_RWSETUP_(1)
 				| AT91_SMC_DBW_8
 				| AT91_SMC_WSEN
@@ -122,7 +123,7 @@ static void __init eco920_board_init(void)
 	at91_set_deglitch(AT91_PIN_PA23, 1);
 
 /* Initialization of the Static Memory Controller for Chip Select 3 */
-	at91_sys_write(AT91_SMC_CSR(3),
+	at91_ramc_write(0, AT91_SMC_CSR(3),
 		AT91_SMC_DBW_16  |	/* 16 bit */
 		AT91_SMC_WSEN    |
 		AT91_SMC_NWS_(5) |	/* wait states */
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index eec02cd57ced..1815152001f7 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-at91/board-flexibity.c
  *
- *  Copyright (C) 2010 Flexibity
+ *  Copyright (C) 2010-2011 Flexibity
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
  *
@@ -62,6 +62,13 @@ static struct at91_udc_data __initdata flexibity_udc_data = {
 	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
 };
 
+/* I2C devices */
+static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1307", 0x68),
+	},
+};
+
 /* SPI devices */
 static struct spi_board_info flexibity_spi_devices[] = {
 	{	/* DataFlash chip */
@@ -141,6 +148,9 @@ static void __init flexibity_board_init(void)
 	at91_add_device_usbh(&flexibity_usbh_data);
 	/* USB Device */
 	at91_add_device_udc(&flexibity_udc_data);
+	/* I2C */
+	at91_add_device_i2c(flexibity_i2c_devices,
+		ARRAY_SIZE(flexibity_i2c_devices));
 	/* SPI */
 	at91_add_device_spi(flexibity_spi_devices,
 		ARRAY_SIZE(flexibity_spi_devices));
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index d75a4a2ad9c2..bb9914582013 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -38,6 +38,7 @@
 #include <mach/board.h>
 #include <mach/cpu.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index ab024fa11d5c..59e35dd14863 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -39,6 +39,7 @@
 
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 782f37946af5..9083df04e7ed 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -41,6 +41,7 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index ef7c12a92246..11cbaa8946fe 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -41,6 +41,7 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ea0d1b9c2b7b..57497e2b8878 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -24,11 +24,13 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/leds.h>
-#include <linux/clk.h>
 #include <linux/atmel-mci.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 #include <video/atmel_lcdc.h>
+#include <media/soc_camera.h>
+#include <media/atmel-isi.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -185,6 +187,71 @@ static void __init ek_add_device_nand(void)
 
 
 /*
+ *  ISI
+ */
+static struct isi_platform_data __initdata isi_data = {
+	.frate			= ISI_CFG1_FRATE_CAPTURE_ALL,
+	/* to use codec and preview path simultaneously */
+	.full_mode		= 1,
+	.data_width_flags	= ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
+	/* ISI_MCK is provided by programmable clock or external clock */
+	.mck_hz			= 25000000,
+};
+
+
+/*
+ * soc-camera OV2640
+ */
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
+{
+	/* ISI board for ek using default 8-bits connection */
+	return SOCAM_DATAWIDTH_8;
+}
+
+static int i2c_camera_power(struct device *dev, int on)
+{
+	/* enable or disable the camera */
+	pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
+	at91_set_gpio_output(AT91_PIN_PD13, !on);
+
+	if (!on)
+		goto out;
+
+	/* If enabled, give a reset impulse */
+	at91_set_gpio_output(AT91_PIN_PD12, 0);
+	msleep(20);
+	at91_set_gpio_output(AT91_PIN_PD12, 1);
+	msleep(100);
+
+out:
+	return 0;
+}
+
+static struct i2c_board_info i2c_camera = {
+	I2C_BOARD_INFO("ov2640", 0x30),
+};
+
+static struct soc_camera_link iclink_ov2640 = {
+	.bus_id			= 0,
+	.board_info		= &i2c_camera,
+	.i2c_adapter_id		= 0,
+	.power			= i2c_camera_power,
+	.query_bus_param	= isi_camera_query_bus_param,
+};
+
+static struct platform_device isi_ov2640 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 0,
+	.dev	= {
+		.platform_data = &iclink_ov2640,
+	},
+};
+#endif
+
+
+/*
  * LCD Controller
  */
 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
@@ -377,7 +444,12 @@ static struct gpio_led ek_pwm_led[] = {
 #endif
 };
 
-
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_SOC_CAMERA_OV2640) || \
+	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
+	&isi_ov2640,
+#endif
+};
 
 static void __init ek_board_init(void)
 {
@@ -399,6 +471,8 @@ static void __init ek_board_init(void)
 	ek_add_device_nand();
 	/* I2C */
 	at91_add_device_i2c(0, NULL, 0);
+	/* ISI, using programmable clock as ISI_MCK */
+	at91_add_device_isi(&isi_data, true);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Touch Screen */
@@ -410,6 +484,8 @@ static void __init ek_board_init(void)
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+	/* Other platform devices */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index bbd553e1cd93..52f460768f71 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -45,6 +45,7 @@
 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/at91_ramc.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
@@ -393,7 +394,7 @@ static void yl9200_init_video(void)
 	at91_set_A_periph(AT91_PIN_PC6, 0);
 
 	/* Initialization of the Static Memory Controller for Chip Select 2 */
-	at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16		/* 16 bit */
+	at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16		/* 16 bit */
 			| AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)	/* wait states */
 			| AT91_SMC_TDF_(0x100)			/* float time */
 	);
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 61873f3aa92d..be51ca7f694d 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -28,9 +28,12 @@
 #include <mach/at91_pmc.h>
 #include <mach/cpu.h>
 
+#include <asm/proc-fns.h>
+
 #include "clock.h"
 #include "generic.h"
 
+void __iomem *at91_pmc_base;
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq
@@ -47,26 +50,38 @@
 /*
  * Chips have some kind of clocks : group them by functionality
  */
-#define cpu_has_utmi()		(  cpu_is_at91cap9() \
-				|| cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45())
+#define cpu_has_utmi()		(  cpu_is_at91sam9rl() \
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
 
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
-				|| cpu_is_at91sam9g45())
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45()))
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5()))
 
-#define cpu_has_upll()		(cpu_is_at91sam9g45())
+#define cpu_has_upll()		(cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
 
 /* USB host HS & FS */
 #define cpu_has_uhp()		(!cpu_is_at91sam9rl())
 
 /* USB device FS only */
 #define cpu_has_udpfs()		(!(cpu_is_at91sam9rl() \
-				|| cpu_is_at91sam9g45()))
+				|| cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5()))
+
+#define cpu_has_plladiv2()	(cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
+
+#define cpu_has_mdiv3()		(cpu_is_at91sam9g45() \
+				|| cpu_is_at91sam9x5())
+
+#define cpu_has_alt_prescaler()	(cpu_is_at91sam9x5())
 
 static LIST_HEAD(clocks);
 static DEFINE_SPINLOCK(clk_lock);
@@ -111,11 +126,11 @@ static void pllb_mode(struct clk *clk, int is_on)
 		value = 0;
 
 	// REVISIT: Add work-around for AT91RM9200 Errata #26 ?
-	at91_sys_write(AT91_CKGR_PLLBR, value);
+	at91_pmc_write(AT91_CKGR_PLLBR, value);
 
 	do {
 		cpu_relax();
-	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
+	} while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
 }
 
 static struct clk pllb = {
@@ -130,31 +145,24 @@ static struct clk pllb = {
 static void pmc_sys_mode(struct clk *clk, int is_on)
 {
 	if (is_on)
-		at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask);
 	else
-		at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask);
 }
 
 static void pmc_uckr_mode(struct clk *clk, int is_on)
 {
-	unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR);
-
-	if (cpu_is_at91sam9g45()) {
-		if (is_on)
-			uckr |= AT91_PMC_BIASEN;
-		else
-			uckr &= ~AT91_PMC_BIASEN;
-	}
+	unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
 
 	if (is_on) {
 		is_on = AT91_PMC_LOCKU;
-		at91_sys_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
+		at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
 	} else
-		at91_sys_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
+		at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
 
 	do {
 		cpu_relax();
-	} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
+	} while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
 }
 
 /* USB function clocks (PLLB must be 48 MHz) */
@@ -190,9 +198,9 @@ struct clk mck = {
 static void pmc_periph_mode(struct clk *clk, int is_on)
 {
 	if (is_on)
-		at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
 	else
-		at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
+		at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
 }
 
 static struct clk __init *at91_css_to_clk(unsigned long css)
@@ -210,11 +218,24 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 				return &utmi_clk;
 			else if (cpu_has_pllb())
 				return &pllb;
+			break;
+		/* alternate PMC: can use master clock */
+		case AT91_PMC_CSS_MASTER:
+			return &mck;
 	}
 
 	return NULL;
 }
 
+static int pmc_prescaler_divider(u32 reg)
+{
+	if (cpu_has_alt_prescaler()) {
+		return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET);
+	} else {
+		return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET);
+	}
+}
+
 static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
@@ -316,12 +337,22 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long	flags;
 	unsigned	prescale;
+	unsigned long	prescale_offset, css_mask;
 	unsigned long	actual;
 
 	if (!clk_is_programmable(clk))
 		return -EINVAL;
 	if (clk->users)
 		return -EBUSY;
+
+	if (cpu_has_alt_prescaler()) {
+		prescale_offset = PMC_ALT_PRES_OFFSET;
+		css_mask = AT91_PMC_ALT_PCKR_CSS;
+	} else {
+		prescale_offset = PMC_PRES_OFFSET;
+		css_mask = AT91_PMC_CSS;
+	}
+
 	spin_lock_irqsave(&clk_lock, flags);
 
 	actual = clk->parent->rate_hz;
@@ -329,10 +360,10 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 		if (actual && actual <= rate) {
 			u32	pckr;
 
-			pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-			pckr &= AT91_PMC_CSS;	/* clock selection */
-			pckr |= prescale << 2;
-			at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
+			pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
+			pckr &= css_mask;	/* keep clock selection */
+			pckr |= prescale << prescale_offset;
+			at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr);
 			clk->rate_hz = actual;
 			break;
 		}
@@ -366,7 +397,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 
 	clk->rate_hz = parent->rate_hz;
 	clk->parent = parent;
-	at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
+	at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id);
 
 	spin_unlock_irqrestore(&clk_lock, flags);
 	return 0;
@@ -378,11 +409,17 @@ static void __init init_programmable_clock(struct clk *clk)
 {
 	struct clk	*parent;
 	u32		pckr;
+	unsigned int	css_mask;
+
+	if (cpu_has_alt_prescaler())
+		css_mask = AT91_PMC_ALT_PCKR_CSS;
+	else
+		css_mask = AT91_PMC_CSS;
 
-	pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
-	parent = at91_css_to_clk(pckr & AT91_PMC_CSS);
+	pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
+	parent = at91_css_to_clk(pckr & css_mask);
 	clk->parent = parent;
-	clk->rate_hz = parent->rate_hz / (1 << ((pckr & AT91_PMC_PRES) >> 2));
+	clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
 }
 
 #endif	/* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
@@ -396,19 +433,24 @@ static int at91_clk_show(struct seq_file *s, void *unused)
 	u32		scsr, pcsr, uckr = 0, sr;
 	struct clk	*clk;
 
-	seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
-	seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
-	seq_printf(s, "MOR  = %8x\n", at91_sys_read(AT91_CKGR_MOR));
-	seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
-	seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
+	scsr = at91_pmc_read(AT91_PMC_SCSR);
+	pcsr = at91_pmc_read(AT91_PMC_PCSR);
+	sr = at91_pmc_read(AT91_PMC_SR);
+	seq_printf(s, "SCSR = %8x\n", scsr);
+	seq_printf(s, "PCSR = %8x\n", pcsr);
+	seq_printf(s, "MOR  = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
+	seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
+	seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
 	if (cpu_has_pllb())
-		seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
-	if (cpu_has_utmi())
-		seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
-	seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+		seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR));
+	if (cpu_has_utmi()) {
+		uckr = at91_pmc_read(AT91_CKGR_UCKR);
+		seq_printf(s, "UCKR = %8x\n", uckr);
+	}
+	seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
 	if (cpu_has_upll())
-		seq_printf(s, "USB  = %8x\n", at91_sys_read(AT91_PMC_USB));
-	seq_printf(s, "SR   = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
+		seq_printf(s, "USB  = %8x\n", at91_pmc_read(AT91_PMC_USB));
+	seq_printf(s, "SR   = %8x\n", sr);
 
 	seq_printf(s, "\n");
 
@@ -596,16 +638,14 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+		at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
 		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
 		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-	} else if (cpu_is_at91cap9()) {
-		uhpck.pmc_mask = AT91CAP9_PMC_UHP;
 	}
-	at91_sys_write(AT91_CKGR_PLLBR, 0);
+	at91_pmc_write(AT91_CKGR_PLLBR, 0);
 
 	udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
 	uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
@@ -622,13 +662,13 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
 	/* Setup divider by 10 to reach 48 MHz */
 	usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
 
-	at91_sys_write(AT91_PMC_USB, usbr);
+	at91_pmc_write(AT91_PMC_USB, usbr);
 
 	/* Now set uhpck values */
 	uhpck.parent = &utmi_clk;
 	uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 	uhpck.rate_hz = utmi_clk.rate_hz;
-	uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+	uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
 int __init at91_clock_init(unsigned long main_clock)
@@ -637,6 +677,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	int i;
 	int pll_overclock = false;
 
+	at91_pmc_base = ioremap(AT91_PMC, 256);
+	if (!at91_pmc_base)
+		panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
 	/*
 	 * When the bootloader initialized the main oscillator correctly,
 	 * there's no problem using the cycle counter.  But if it didn't,
@@ -645,14 +689,14 @@ int __init at91_clock_init(unsigned long main_clock)
 	 */
 	if (!main_clock) {
 		do {
-			tmp = at91_sys_read(AT91_CKGR_MCFR);
+			tmp = at91_pmc_read(AT91_CKGR_MCFR);
 		} while (!(tmp & AT91_PMC_MAINRDY));
 		main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
 	}
 	main_clk.rate_hz = main_clock;
 
 	/* report if PLLA is more than mildly overclocked */
-	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
+	plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
 	if (cpu_has_300M_plla()) {
 		if (plla.rate_hz > 300000000)
 			pll_overclock = true;
@@ -666,8 +710,8 @@ int __init at91_clock_init(unsigned long main_clock)
 	if (pll_overclock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
-	if (cpu_is_at91sam9g45()) {
-		mckr = at91_sys_read(AT91_PMC_MCKR);
+	if (cpu_has_plladiv2()) {
+		mckr = at91_pmc_read(AT91_PMC_MCKR);
 		plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12));	/* plla divisor by 2 */
 	}
 
@@ -688,6 +732,10 @@ int __init at91_clock_init(unsigned long main_clock)
 		 * (obtain the USB High Speed 480 MHz when input is 12 MHz)
 		 */
 		utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
+
+		/* UTMI bias and PLL are managed at the same time */
+		if (cpu_has_upll())
+			utmi_clk.pmc_mask |= AT91_PMC_BIASEN;
 	}
 
 	/*
@@ -703,10 +751,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	 * MCK and CPU derive from one of those primary clocks.
 	 * For now, assume this parentage won't change.
 	 */
-	mckr = at91_sys_read(AT91_PMC_MCKR);
+	mckr = at91_pmc_read(AT91_PMC_MCKR);
 	mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
 	freq = mck.parent->rate_hz;
-	freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2));				/* prescale */
+	freq /= pmc_prescaler_divider(mckr);					/* prescale */
 	if (cpu_is_at91rm9200()) {
 		mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else if (cpu_is_at91sam9g20()) {
@@ -714,13 +762,19 @@ int __init at91_clock_init(unsigned long main_clock)
 			freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq;	/* mdiv ; (x >> 7) = ((x >> 8) * 2) */
 		if (mckr & AT91_PMC_PDIV)
 			freq /= 2;		/* processor clock division */
-	} else if (cpu_is_at91sam9g45()) {
+	} else if (cpu_has_mdiv3()) {
 		mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
 			freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));	/* mdiv */
 	} else {
 		mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8));		/* mdiv */
 	}
 
+	if (cpu_has_alt_prescaler()) {
+		/* Programmable clocks can use MCK */
+		mck.type |= CLK_TYPE_PRIMARY;
+		mck.id = 4;
+	}
+
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
 		at91_clk_add(standard_pmc_clocks[i]);
@@ -770,9 +824,15 @@ static int __init at91_clock_reset(void)
 		pr_debug("Clocks: disable unused %s\n", clk->name);
 	}
 
-	at91_sys_write(AT91_PMC_PCDR, pcdr);
-	at91_sys_write(AT91_PMC_SCDR, scdr);
+	at91_pmc_write(AT91_PMC_PCDR, pcdr);
+	at91_pmc_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
 late_initcall(at91_clock_reset);
+
+void at91sam9_idle(void)
+{
+	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+	cpu_do_idle();
+}
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
index a851e6c98421..555d956b3a57 100644
--- a/arch/arm/mach-at91/cpuidle.c
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -39,20 +39,15 @@ static int at91_enter_idle(struct cpuidle_device *dev,
 {
 	struct timeval before, after;
 	int idle_time;
-	u32 saved_lpr;
 
 	local_irq_disable();
 	do_gettimeofday(&before);
 	if (index == 0)
 		/* Wait for interrupt state */
 		cpu_do_idle();
-	else if (index == 1) {
-		asm("b 1f; .align 5; 1:");
-		asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-		saved_lpr = sdram_selfrefresh_enable();
-		cpu_do_idle();
-		sdram_selfrefresh_disable(saved_lpr);
-	}
+	else if (index == 1)
+		at91_standby();
+
 	do_gettimeofday(&after);
 	local_irq_enable();
 	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 594133451c0c..4cad85e57470 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -28,6 +28,7 @@ extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
 struct sys_timer;
+extern void at91rm9200_ioremap_st(u32 addr);
 extern struct sys_timer at91rm9200_timer;
 extern void at91sam926x_ioremap_pit(u32 addr);
 extern struct sys_timer at91sam926x_timer;
@@ -45,7 +46,6 @@ extern void __init at91sam9261_set_console_clock(int id);
 extern void __init at91sam9263_set_console_clock(int id);
 extern void __init at91sam9rl_set_console_clock(int id);
 extern void __init at91sam9g45_set_console_clock(int id);
-extern void __init at91cap9_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
 #else
@@ -57,6 +57,9 @@ struct device;
 extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
+/* idle */
+extern void at91sam9_idle(void);
+
 /* reset */
 extern void at91_ioremap_rstc(u32 base_addr);
 extern void at91sam9_alt_restart(char, const char *);
@@ -65,6 +68,12 @@ extern void at91sam9g45_restart(char, const char *);
 /* shutdown */
 extern void at91_ioremap_shdwc(u32 base_addr);
 
+/* Matrix */
+extern void at91_ioremap_matrix(u32 base_addr);
+
+/* Ram Controler */
+extern void at91_ioremap_ramc(int id, u32 addr, u32 size);
+
  /* GPIO */
 #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
 #define AT91RM9200_BGA		4	/* AT91RM9200 BGA package has 4 banks */
diff --git a/arch/arm/mach-at91/include/mach/at91_matrix.h b/arch/arm/mach-at91/include/mach/at91_matrix.h
new file mode 100644
index 000000000000..02fae9de746b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_matrix.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2
+ */
+
+#ifndef __MACH_AT91_MATRIX_H__
+#define __MACH_AT91_MATRIX_H__
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_matrix_base;
+
+#define at91_matrix_read(field) \
+	__raw_readl(at91_matrix_base + field)
+
+#define at91_matrix_write(field, value) \
+	__raw_writel(value, at91_matrix_base + field);
+
+#else
+.extern at91_matrix_base
+#endif
+
+#endif /* __MACH_AT91_MATRIX_H__ */
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index e46f93e34aab..36604782a78f 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -16,17 +16,27 @@
 #ifndef AT91_PMC_H
 #define AT91_PMC_H
 
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_pmc_base;
 
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define at91_pmc_read(field) \
+	__raw_readl(at91_pmc_base + field)
+
+#define at91_pmc_write(field, value) \
+	__raw_writel(value, at91_pmc_base + field)
+#else
+.extern at91_aic_base
+#endif
+
+#define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		0x04			/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		0x08			/* System Clock Status Register */
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
 #define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91CAP9_PMC_DDR	(1 <<  2)		/* DDR Clock [CAP9 revC & some SAM9 only] */
 #define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
 #define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
 #define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
 #define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
@@ -36,27 +46,31 @@
 #define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
 #define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
 
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+#define	AT91_PMC_PCER		0x10			/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		0x14			/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		0x18			/* Peripheral Clock Status Register */
 
-#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [some SAM9, CAP9] */
+#define	AT91_CKGR_UCKR		0x1C			/* UTMI Clock Register [some SAM9] */
 #define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
 #define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
 #define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
 #define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI BIAS Start-up Time */
 
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+#define	AT91_CKGR_MOR		0x20			/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    <<  0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    <<  1)		/* Oscillator Bypass */
+#define		AT91_PMC_MOSCRCEN	(1    <<  3)		/* Main On-Chip RC Oscillator Enable [some SAM9] */
+#define		AT91_PMC_OSCOUNT	(0xff <<  8)		/* Main Oscillator Start-up Time */
+#define		AT91_PMC_KEY		(0x37 << 16)		/* MOR Writing Key */
+#define		AT91_PMC_MOSCSEL	(1    << 24)		/* Main Oscillator Selection [some SAM9] */
+#define		AT91_PMC_CFDEN		(1    << 25)		/* Clock Failure Detector Enable [some SAM9] */
 
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define	AT91_CKGR_MCFR		0x24			/* Main Clock Frequency Register */
 #define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
 #define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
 
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define	AT91_CKGR_PLLAR		0x28			/* PLL A Register */
+#define	AT91_CKGR_PLLBR		0x2c			/* PLL B Register */
 #define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
 #define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
 #define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
@@ -67,27 +81,37 @@
 #define			AT91_PMC_USBDIV_4		(2 << 28)
 #define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
 
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define	AT91_PMC_MCKR		0x30			/* Master Clock Register */
 #define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
 #define			AT91_PMC_CSS_SLOW		(0 << 0)
 #define			AT91_PMC_CSS_MAIN		(1 << 0)
 #define			AT91_PMC_CSS_PLLA		(2 << 0)
 #define			AT91_PMC_CSS_PLLB		(3 << 0)
 #define			AT91_PMC_CSS_UPLL		(3 << 0)	/* [some SAM9 only] */
-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << 2)
-#define			AT91_PMC_PRES_2			(1 << 2)
-#define			AT91_PMC_PRES_4			(2 << 2)
-#define			AT91_PMC_PRES_8			(3 << 2)
-#define			AT91_PMC_PRES_16		(4 << 2)
-#define			AT91_PMC_PRES_32		(5 << 2)
-#define			AT91_PMC_PRES_64		(6 << 2)
+#define		PMC_PRES_OFFSET		2
+#define		AT91_PMC_PRES		(7 <<  PMC_PRES_OFFSET)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_2			(1 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_4			(2 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_8			(3 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_16		(4 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_32		(5 << PMC_PRES_OFFSET)
+#define			AT91_PMC_PRES_64		(6 << PMC_PRES_OFFSET)
+#define		PMC_ALT_PRES_OFFSET	4
+#define		AT91_PMC_ALT_PRES	(7 <<  PMC_ALT_PRES_OFFSET)		/* Master Clock Prescaler [alternate location] */
+#define			AT91_PMC_ALT_PRES_1		(0 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_2		(1 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_4		(2 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_8		(3 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_16		(4 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_32		(5 << PMC_ALT_PRES_OFFSET)
+#define			AT91_PMC_ALT_PRES_64		(6 << PMC_ALT_PRES_OFFSET)
 #define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
 #define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
 #define			AT91RM9200_PMC_MDIV_2		(1 << 8)
 #define			AT91RM9200_PMC_MDIV_3		(2 << 8)
 #define			AT91RM9200_PMC_MDIV_4		(3 << 8)
-#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9 only] */
 #define			AT91SAM9_PMC_MDIV_2		(1 << 8)
 #define			AT91SAM9_PMC_MDIV_4		(2 << 8)
 #define			AT91SAM9_PMC_MDIV_6		(3 << 8)	/* [some SAM9 only] */
@@ -99,35 +123,55 @@
 #define			AT91_PMC_PLLADIV2_OFF		(0 << 12)
 #define			AT91_PMC_PLLADIV2_ON		(1 << 12)
 
-#define	AT91_PMC_USB		(AT91_PMC + 0x38)	/* USB Clock Register [some SAM9 only] */
+#define	AT91_PMC_USB		0x38			/* USB Clock Register [some SAM9 only] */
 #define		AT91_PMC_USBS		(0x1 <<  0)		/* USB OHCI Input clock selection */
 #define			AT91_PMC_USBS_PLLA		(0 << 0)
 #define			AT91_PMC_USBS_UPLL		(1 << 0)
 #define		AT91_PMC_OHCIUSBDIV	(0xF <<  8)		/* Divider for USB OHCI Clock */
 
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define	AT91_PMC_SMD		0x3c			/* Soft Modem Clock Register [some SAM9 only] */
+#define		AT91_PMC_SMDS		(0x1  <<  0)		/* SMD input clock selection */
+#define		AT91_PMC_SMD_DIV	(0x1f <<  8)		/* SMD input clock divider */
+#define		AT91_PMC_SMDDIV(n)	(((n) <<  8) & AT91_PMC_SMD_DIV)
+
+#define	AT91_PMC_PCKR(n)	(0x40 + ((n) * 4))	/* Programmable Clock 0-N Registers */
+#define		AT91_PMC_ALT_PCKR_CSS	(0x7 <<  0)		/* Programmable Clock Source Selection [alternate length] */
+#define			AT91_PMC_CSS_MASTER		(4 << 0)	/* [some SAM9 only] */
 #define		AT91_PMC_CSSMCK		(0x1 <<  8)		/* CSS or Master Clock Selection */
 #define			AT91_PMC_CSSMCK_CSS		(0 << 8)
 #define			AT91_PMC_CSSMCK_MCK		(1 << 8)
 
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define	AT91_PMC_IER		0x60			/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		0x64			/* Interrupt Disable Register */
+#define	AT91_PMC_SR		0x68			/* Status Register */
 #define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
 #define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
 #define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
 #define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9, AT91CAP9 only] */
-#define		AT91_PMC_OSCSEL		(1 <<  7)		/* Slow Clock Oscillator [AT91CAP9 revC only] */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [some SAM9] */
 #define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+#define		AT91_PMC_MOSCSELS	(1 << 16)		/* Main Oscillator Selection [some SAM9] */
+#define		AT91_PMC_MOSCRCS	(1 << 17)		/* Main On-Chip RC [some SAM9] */
+#define		AT91_PMC_CFDEV		(1 << 18)		/* Clock Failure Detector Event [some SAM9] */
+#define	AT91_PMC_IMR		0x6c			/* Interrupt Mask Register */
+
+#define AT91_PMC_PROT		0xe4			/* Write Protect Mode Register [some SAM9] */
+#define		AT91_PMC_WPEN		(0x1  <<  0)		/* Write Protect Enable */
+#define		AT91_PMC_WPKEY		(0xffffff << 8)		/* Write Protect Key */
+#define		AT91_PMC_PROTKEY	(0x504d43 << 8)		/* Activation Code */
 
-#define AT91_PMC_PROT		(AT91_PMC + 0xe4)	/* Protect Register [AT91CAP9 revC only] */
-#define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
+#define AT91_PMC_WPSR		0xe8			/* Write Protect Status Register [some SAM9] */
+#define		AT91_PMC_WPVS		(0x1  <<  0)		/* Write Protect Violation Status */
+#define		AT91_PMC_WPVSRC		(0xffff  <<  8)		/* Write Protect Violation Source */
 
-#define AT91_PMC_VER		(AT91_PMC + 0xfc)	/* PMC Module Version [AT91CAP9 only] */
+#define AT91_PMC_PCR		0x10c			/* Peripheral Control Register [some SAM9] */
+#define		AT91_PMC_PCR_PID	(0x3f  <<  0)		/* Peripheral ID */
+#define		AT91_PMC_PCR_CMD	(0x1  <<  12)		/* Command */
+#define		AT91_PMC_PCR_DIV	(0x3  <<  16)		/* Divisor Value */
+#define		AT91_PMC_PCRDIV(n)	(((n) <<  16) & AT91_PMC_PCR_DIV)
+#define		AT91_PMC_PCR_EN		(0x1  <<  28)		/* Enable */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ramc.h b/arch/arm/mach-at91/include/mach/at91_ramc.h
new file mode 100644
index 000000000000..d8aeb278614e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ramc.h
@@ -0,0 +1,32 @@
+/*
+ * Header file for the Atmel RAM Controller
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __AT91_RAMC_H__
+#define __AT91_RAMC_H__
+
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_ramc_base[];
+
+#define at91_ramc_read(id, field) \
+	__raw_readl(at91_ramc_base[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+	__raw_writel(value, at91_ramc_base[id] + field)
+#else
+.extern at91_ramc_base
+#endif
+
+#define AT91_MEMCTRL_MC		0
+#define AT91_MEMCTRL_SDRAMC	1
+#define AT91_MEMCTRL_DDRSDR	2
+
+#include <mach/at91rm9200_sdramc.h>
+#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91sam9_sdramc.h>
+
+#endif /* __AT91_RAMC_H__ */
diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
index 8847173e4101..969aac27109f 100644
--- a/arch/arm/mach-at91/include/mach/at91_st.h
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -16,34 +16,46 @@
 #ifndef AT91_ST_H
 #define AT91_ST_H
 
-#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_st_base;
+
+#define at91_st_read(field) \
+	__raw_readl(at91_st_base + field)
+
+#define at91_st_write(field, value) \
+	__raw_writel(value, at91_st_base + field);
+#else
+.extern at91_st_base
+#endif
+
+#define	AT91_ST_CR		0x00			/* Control Register */
 #define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
 
-#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+#define	AT91_ST_PIMR		0x04			/* Period Interval Mode Register */
 #define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
 
-#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+#define	AT91_ST_WDMR		0x08			/* Watchdog Mode Register */
 #define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
 #define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
 #define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
 
-#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+#define	AT91_ST_RTMR		0x0c			/* Real-time Mode Register */
 #define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
 
-#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+#define	AT91_ST_SR		0x10			/* Status Register */
 #define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
 #define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
 #define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
 #define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
 
-#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
-#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
-#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+#define	AT91_ST_IER		0x14			/* Interrupt Enable Register */
+#define	AT91_ST_IDR		0x18			/* Interrupt Disable Register */
+#define	AT91_ST_IMR		0x1c			/* Interrupt Mask Register */
 
-#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+#define	AT91_ST_RTAR		0x20			/* Real-time Alarm Register */
 #define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
 
-#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+#define	AT91_ST_CRTR		0x24			/* Current Real-time Register */
 #define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
deleted file mode 100644
index 61d952902f2b..000000000000
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2007 Atmel Corporation.
- *
- * Common definitions.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_H
-#define AT91CAP9_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
-#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
-#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
-#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
-#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
-#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
-#define AT91CAP9_ID_US0		8	/* USART 0 */
-#define AT91CAP9_ID_US1		9	/* USART 1 */
-#define AT91CAP9_ID_US2		10	/* USART 2 */
-#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
-#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
-#define AT91CAP9_ID_CAN		13	/* CAN */
-#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
-#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
-#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
-#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
-#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
-#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
-#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
-#define AT91CAP9_ID_EMAC	22	/* Ethernet */
-#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
-#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
-#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
-#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
-#define AT91CAP9_ID_DMA		27	/* DMA Controller */
-#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
-#define AT91CAP9_ID_UHP		29	/* USB Host Port */
-#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91CAP9_BASE_UDPHS		0xfff78000
-#define AT91CAP9_BASE_TCB0		0xfff7c000
-#define AT91CAP9_BASE_TC0		0xfff7c000
-#define AT91CAP9_BASE_TC1		0xfff7c040
-#define AT91CAP9_BASE_TC2		0xfff7c080
-#define AT91CAP9_BASE_MCI0		0xfff80000
-#define AT91CAP9_BASE_MCI1		0xfff84000
-#define AT91CAP9_BASE_TWI		0xfff88000
-#define AT91CAP9_BASE_US0		0xfff8c000
-#define AT91CAP9_BASE_US1		0xfff90000
-#define AT91CAP9_BASE_US2		0xfff94000
-#define AT91CAP9_BASE_SSC0		0xfff98000
-#define AT91CAP9_BASE_SSC1		0xfff9c000
-#define AT91CAP9_BASE_AC97C		0xfffa0000
-#define AT91CAP9_BASE_SPI0		0xfffa4000
-#define AT91CAP9_BASE_SPI1		0xfffa8000
-#define AT91CAP9_BASE_CAN		0xfffac000
-#define AT91CAP9_BASE_PWMC		0xfffb8000
-#define AT91CAP9_BASE_EMAC		0xfffbc000
-#define AT91CAP9_BASE_ADC		0xfffc0000
-#define AT91CAP9_BASE_ISI		0xfffc4000
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR	(cpu_is_at91cap9_revB() ?	\
-			(0xfffffd50 - AT91_BASE_SYS) :	\
-			(0xfffffd60 - AT91_BASE_SYS))
-
-#define AT91CAP9_BASE_ECC	0xffffe200
-#define AT91CAP9_BASE_DMA	0xffffec00
-#define AT91CAP9_BASE_SMC	0xffffe800
-#define AT91CAP9_BASE_DBGU	AT91_BASE_DBGU1
-#define AT91CAP9_BASE_PIOA	0xfffff200
-#define AT91CAP9_BASE_PIOB	0xfffff400
-#define AT91CAP9_BASE_PIOC	0xfffff600
-#define AT91CAP9_BASE_PIOD	0xfffff800
-#define AT91CAP9_BASE_RSTC	0xfffffd00
-#define AT91CAP9_BASE_SHDWC	0xfffffd10
-#define AT91CAP9_BASE_RTT	0xfffffd20
-#define AT91CAP9_BASE_PIT	0xfffffd30
-#define AT91CAP9_BASE_WDT	0xfffffd40
-
-#define AT91_USART0	AT91CAP9_BASE_US0
-#define AT91_USART1	AT91CAP9_BASE_US1
-#define AT91_USART2	AT91CAP9_BASE_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
-#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
-
-#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
-
-#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
-#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
-#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
deleted file mode 100644
index 4b9d4aff4b4f..000000000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
- *
- *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
- *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
- *  Copyright (C) 2006 Atmel Corporation.
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_MATRIX_H
-#define AT91CAP9_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
-#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
-#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
-#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
-#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
-#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
-#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
-#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
-#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
-#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
-#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define		AT91_MATRIX_RCB2		(1 << 2)
-#define		AT91_MATRIX_RCB3		(1 << 3)
-#define		AT91_MATRIX_RCB4		(1 << 4)
-#define		AT91_MATRIX_RCB5		(1 << 5)
-#define		AT91_MATRIX_RCB6		(1 << 6)
-#define		AT91_MATRIX_RCB7		(1 << 7)
-#define		AT91_MATRIX_RCB8		(1 << 8)
-#define		AT91_MATRIX_RCB9		(1 << 9)
-#define		AT91_MATRIX_RCB10		(1 << 10)
-#define		AT91_MATRIX_RCB11		(1 << 11)
-
-#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
-#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
-
-#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
-#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
-#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
-#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
-#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
-#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
-#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
-#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
-#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
-
-#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
-#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
-#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
index bacb51141819..603e6aac2a4f 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -77,26 +77,22 @@
 
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
-#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
-#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
-
 #define AT91RM9200_BASE_DBGU	AT91_BASE_DBGU0	/* Debug Unit */
 #define AT91RM9200_BASE_PIOA	0xfffff400	/* PIO Controller A */
 #define AT91RM9200_BASE_PIOB	0xfffff600	/* PIO Controller B */
 #define AT91RM9200_BASE_PIOC	0xfffff800	/* PIO Controller C */
 #define AT91RM9200_BASE_PIOD	0xfffffa00	/* PIO Controller D */
+#define AT91RM9200_BASE_ST	0xfffffd00	/* System Timer */
 #define AT91RM9200_BASE_RTC	0xfffffe00	/* Real-Time Clock */
+#define AT91RM9200_BASE_MC	0xffffff00	/* Memory Controllers */
 
 #define AT91_USART0	AT91RM9200_BASE_US0
 #define AT91_USART1	AT91RM9200_BASE_US1
 #define AT91_USART2	AT91RM9200_BASE_US2
 #define AT91_USART3	AT91RM9200_BASE_US3
 
-#define AT91_MATRIX	0	/* not supported */
-
 /*
  * Internal Memory.
  */
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
index d34e4ed89349..aeaadfb452af 100644
--- a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -17,10 +17,10 @@
 #define AT91RM9200_MC_H
 
 /* Memory Controller */
-#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+#define AT91_MC_RCR		0x00			/* MC Remap Control Register */
 #define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
 
-#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+#define AT91_MC_ASR		0x04			/* MC Abort Status Register */
 #define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
 #define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
 #define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
@@ -40,16 +40,16 @@
 #define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
 #define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
 
-#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+#define AT91_MC_AASR		0x08			/* MC Abort Address Status Register */
 
-#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+#define AT91_MC_MPR		0x0c			/* MC Master Priority Register */
 #define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
 #define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
 #define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
 #define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
 
 /* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+#define AT91_EBI_CSA		0x60			/* Chip Select Assignment Register */
 #define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
 #define			AT91_EBI_CS0A_SMC		(0 << 0)
 #define			AT91_EBI_CS0A_BFC		(1 << 0)
@@ -66,7 +66,7 @@
 #define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
 
 /* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define	AT91_SMC_CSR(n)		(0x70 + ((n) * 4))	/* SMC Chip Select Register */
 #define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
 #define			AT91_SMC_NWS_(x)	((x) << 0)
 #define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
@@ -87,52 +87,8 @@
 #define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
 #define			AT91_SMC_RWHOLD_(x)	((x) << 28)
 
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 4)
-#define			AT91_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
-#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
-#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
-#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
-
 /* Burst Flash Controller register */
-#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+#define AT91_BFC_MR		0xc0			/* Mode Register */
 #define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
 #define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
 #define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
new file mode 100644
index 000000000000..aa047f458f1b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (SDRAMC only) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SDRAMC_H
+#define AT91RM9200_SDRAMC_H
+
+/* SDRAM Controller registers */
+#define AT91RM9200_SDRAMC_MR		0x90			/* Mode Register */
+#define		AT91RM9200_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91RM9200_SDRAMC_MODE_NORMAL		(0 << 0)
+#define			AT91RM9200_SDRAMC_MODE_NOP		(1 << 0)
+#define			AT91RM9200_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define			AT91RM9200_SDRAMC_MODE_LMR		(3 << 0)
+#define			AT91RM9200_SDRAMC_MODE_REFRESH	(4 << 0)
+#define		AT91RM9200_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+#define			AT91RM9200_SDRAMC_DBW_32	(0 << 4)
+#define			AT91RM9200_SDRAMC_DBW_16	(1 << 4)
+
+#define AT91RM9200_SDRAMC_TR		0x94			/* Refresh Timer Register */
+#define		AT91RM9200_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+
+#define AT91RM9200_SDRAMC_CR		0x98			/* Configuration Register */
+#define		AT91RM9200_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+#define			AT91RM9200_SDRAMC_NC_8	(0 << 0)
+#define			AT91RM9200_SDRAMC_NC_9	(1 << 0)
+#define			AT91RM9200_SDRAMC_NC_10	(2 << 0)
+#define			AT91RM9200_SDRAMC_NC_11	(3 << 0)
+#define		AT91RM9200_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+#define			AT91RM9200_SDRAMC_NR_11	(0 << 2)
+#define			AT91RM9200_SDRAMC_NR_12	(1 << 2)
+#define			AT91RM9200_SDRAMC_NR_13	(2 << 2)
+#define		AT91RM9200_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+#define			AT91RM9200_SDRAMC_NB_2	(0 << 4)
+#define			AT91RM9200_SDRAMC_NB_4	(1 << 4)
+#define		AT91RM9200_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+#define			AT91RM9200_SDRAMC_CAS_2	(2 << 5)
+#define		AT91RM9200_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+#define		AT91RM9200_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+#define		AT91RM9200_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+#define		AT91RM9200_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+#define		AT91RM9200_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+#define		AT91RM9200_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+
+#define AT91RM9200_SDRAMC_SRR		0x9c			/* Self Refresh Register */
+#define AT91RM9200_SDRAMC_LPR		0xa0			/* Low Power Register */
+#define AT91RM9200_SDRAMC_IER		0xa4			/* Interrupt Enable Register */
+#define AT91RM9200_SDRAMC_IDR		0xa8			/* Interrupt Disable Register */
+#define AT91RM9200_SDRAMC_IMR		0xac			/* Interrupt Mask Register */
+#define AT91RM9200_SDRAMC_ISR		0xb0			/* Interrupt Status Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index fa5ca278adeb..08ae9afd00fe 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -78,15 +78,12 @@
 #define AT91SAM9260_BASE_ADC		0xfffe0000
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
-#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
 #define AT91SAM9260_BASE_ECC	0xffffe800
+#define AT91SAM9260_BASE_SDRAMC	0xffffea00
 #define AT91SAM9260_BASE_SMC	0xffffec00
+#define AT91SAM9260_BASE_MATRIX	0xffffee00
 #define AT91SAM9260_BASE_DBGU	AT91_BASE_DBGU0
 #define AT91SAM9260_BASE_PIOA	0xfffff400
 #define AT91SAM9260_BASE_PIOB	0xfffff600
@@ -96,6 +93,7 @@
 #define AT91SAM9260_BASE_RTT	0xfffffd20
 #define AT91SAM9260_BASE_PIT	0xfffffd30
 #define AT91SAM9260_BASE_WDT	0xfffffd40
+#define AT91SAM9260_BASE_GPBR	0xfffffd50
 
 #define AT91_USART0	AT91SAM9260_BASE_US0
 #define AT91_USART1	AT91SAM9260_BASE_US1
@@ -115,6 +113,8 @@
 #define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
 #define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
 #define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+#define AT91SAM9260_SRAM_BASE	0x002FF000	/* Internal SRAM base address */
+#define AT91SAM9260_SRAM_SIZE	SZ_8K		/* Internal SRAM size (8Kb) */
 
 #define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
 
@@ -128,6 +128,8 @@
 #define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
 #define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
 #define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+#define AT91SAM9G20_SRAM_BASE	0x002FC000	/* Internal SRAM base address */
+#define AT91SAM9G20_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
 
 #define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
 
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
index 020f02ed921a..f459df420629 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -15,12 +15,12 @@
 #ifndef AT91SAM9260_MATRIX_H
 #define AT91SAM9260_MATRIX_H
 
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
 #define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
@@ -28,11 +28,11 @@
 #define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
 #define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
 
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
 #define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
 #define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
 #define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
@@ -43,11 +43,11 @@
 #define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
 #define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
 
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
 #define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
 #define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
 #define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
@@ -55,11 +55,11 @@
 #define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
 #define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
 
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
 #define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
 #define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA	0x11C			/* EBI Chip Select Assignment Register */
 #define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 7cde2d36570e..44fbdc12ee62 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -63,14 +63,11 @@
 
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
-#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
 #define AT91SAM9261_BASE_SMC	0xffffec00
+#define AT91SAM9261_BASE_MATRIX	0xffffee00
+#define AT91SAM9261_BASE_SDRAMC	0xffffea00
 #define AT91SAM9261_BASE_DBGU	AT91_BASE_DBGU0
 #define AT91SAM9261_BASE_PIOA	0xfffff400
 #define AT91SAM9261_BASE_PIOB	0xfffff600
@@ -80,6 +77,7 @@
 #define AT91SAM9261_BASE_RTT	0xfffffd20
 #define AT91SAM9261_BASE_PIT	0xfffffd30
 #define AT91SAM9261_BASE_WDT	0xfffffd40
+#define AT91SAM9261_BASE_GPBR	0xfffffd50
 
 #define AT91_USART0	AT91SAM9261_BASE_US0
 #define AT91_USART1	AT91SAM9261_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
index 69c6501915d9..a50cdf8b8ca4 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -15,15 +15,15 @@
 #ifndef AT91SAM9261_MATRIX_H
 #define AT91SAM9261_MATRIX_H
 
-#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define AT91_MATRIX_MCFG	0x00			/* Master Configuration Register */
 #define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
 #define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG0	0x04			/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	0x08			/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	0x0C			/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	0x10			/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	0x14			/* Slave Configuration Register 4 */
 #define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
 #define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
 #define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
@@ -31,7 +31,7 @@
 #define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
 #define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
 
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define AT91_MATRIX_TCR		0x24			/* TCM Configuration Register */
 #define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
 #define			AT91_MATRIX_ITCM_0		(0 << 0)
 #define			AT91_MATRIX_ITCM_16		(5 << 0)
@@ -43,7 +43,7 @@
 #define			AT91_MATRIX_DTCM_32		(6 << 4)
 #define			AT91_MATRIX_DTCM_64		(7 << 4)
 
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA	0x30			/* EBI Chip Select Assignment Register */
 #define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
@@ -58,7 +58,7 @@
 #define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
 #define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
 
-#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define AT91_MATRIX_USBPUCR	0x34			/* USB Pad Pull-Up Control Register */
 #define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
 
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 5949abda962b..d96cbb2e03c4 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -72,18 +72,15 @@
 #define AT91SAM9263_BASE_2DGE		0xfffc8000
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
-#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
-#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-
 #define AT91SAM9263_BASE_ECC0	0xffffe000
+#define AT91SAM9263_BASE_SDRAMC0 0xffffe200
 #define AT91SAM9263_BASE_SMC0	0xffffe400
 #define AT91SAM9263_BASE_ECC1	0xffffe600
+#define AT91SAM9263_BASE_SDRAMC1 0xffffe800
 #define AT91SAM9263_BASE_SMC1	0xffffea00
+#define AT91SAM9263_BASE_MATRIX	0xffffec00
 #define AT91SAM9263_BASE_DBGU	AT91_BASE_DBGU1
 #define AT91SAM9263_BASE_PIOA	0xfffff200
 #define AT91SAM9263_BASE_PIOB	0xfffff400
@@ -96,6 +93,7 @@
 #define AT91SAM9263_BASE_PIT	0xfffffd30
 #define AT91SAM9263_BASE_WDT	0xfffffd40
 #define AT91SAM9263_BASE_RTT1	0xfffffd50
+#define AT91SAM9263_BASE_GPBR	0xfffffd60
 
 #define AT91_USART0	AT91SAM9263_BASE_US0
 #define AT91_USART1	AT91SAM9263_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
index 9b3efd3eb2f3..ebb5fdb565e0 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -15,15 +15,15 @@
 #ifndef AT91SAM9263_MATRIX_H
 #define AT91SAM9263_MATRIX_H
 
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
 #define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
@@ -31,14 +31,14 @@
 #define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
 #define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
 
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
 #define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
 #define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
 #define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
@@ -49,22 +49,22 @@
 #define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
 #define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
 
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
 #define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
 #define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
 #define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
@@ -75,7 +75,7 @@
 #define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
 #define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
 
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
 #define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
 #define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 #define		AT91_MATRIX_RCB2		(1 << 2)
@@ -86,7 +86,7 @@
 #define		AT91_MATRIX_RCB7		(1 << 7)
 #define		AT91_MATRIX_RCB8		(1 << 8)
 
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
 #define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
 #define			AT91_MATRIX_ITCM_0		(0 << 0)
 #define			AT91_MATRIX_ITCM_16		(5 << 0)
@@ -96,7 +96,7 @@
 #define			AT91_MATRIX_DTCM_16		(5 << 4)
 #define			AT91_MATRIX_DTCM_32		(6 << 4)
 
-#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI0CSA	0x120			/* EBI0 Chip Select Assignment Register */
 #define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
@@ -114,7 +114,7 @@
 #define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
 #define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
 
-#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define AT91_MATRIX_EBI1CSA	0x124			/* EBI1 Chip Select Assignment Register */
 #define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index e2f8da8ce5bc..0210797abf2e 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -59,7 +59,6 @@
 #define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
 #define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
 #define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
-#define		AT91CAP9_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
 #define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay [SAM9 Only] */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
@@ -76,7 +75,6 @@
 #define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
 
 #define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
-#define AT91CAP9_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -94,11 +92,9 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
 
 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
-#define AT91CAP9_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91CAP9_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
 #define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
 #define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
@@ -106,16 +102,10 @@
 #define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
 
 #define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
-#define AT91CAP9_DDRSDRC_DLL	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91CAP9_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91CAP9_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91CAP9_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
 #define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91CAP9_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91CAP9_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
 #define AT91_DDRSDRC_HS		0x2C	/* High Speed Register [SAM9 Only] */
 #define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
@@ -131,10 +121,4 @@
 #define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
 #define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
 
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
-	at91_sys_read(AT91_DDRSDRC##num + reg)
-#define at91_ramc_write(num, reg, value) \
-	at91_sys_write(AT91_DDRSDRC##num + reg, value)
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
index 100f5a592926..3d085a9a7450 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -82,10 +82,4 @@
 #define			AT91_SDRAMC_MD_SDRAM		0
 #define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
 
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
-	at91_sys_read(AT91_SDRAMC##num + reg)
-#define at91_ramc_write(num, reg, value) \
-	at91_sys_write(AT91_SDRAMC##num + reg, value)
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index dd9c95ea0862..d052abcff852 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -84,17 +84,14 @@
 #define AT91SAM9G45_BASE_TC5		0xfffd4080
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
-#define AT91_DDRSDRC1	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
-
 #define AT91SAM9G45_BASE_ECC	0xffffe200
+#define AT91SAM9G45_BASE_DDRSDRC1 0xffffe400
+#define AT91SAM9G45_BASE_DDRSDRC0 0xffffe600
 #define AT91SAM9G45_BASE_DMA	0xffffec00
 #define AT91SAM9G45_BASE_SMC	0xffffe800
+#define AT91SAM9G45_BASE_MATRIX	0xffffea00
 #define AT91SAM9G45_BASE_DBGU	AT91_BASE_DBGU1
 #define AT91SAM9G45_BASE_PIOA	0xfffff200
 #define AT91SAM9G45_BASE_PIOB	0xfffff400
@@ -107,6 +104,7 @@
 #define AT91SAM9G45_BASE_PIT	0xfffffd30
 #define AT91SAM9G45_BASE_WDT	0xfffffd40
 #define AT91SAM9G45_BASE_RTC	0xfffffdb0
+#define AT91SAM9G45_BASE_GPBR	0xfffffd60
 
 #define AT91_USART0	AT91SAM9G45_BASE_US0
 #define AT91_USART1	AT91SAM9G45_BASE_US1
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
index c972d60e0aeb..b76e2ed2fbc2 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h
@@ -15,18 +15,18 @@
 #ifndef AT91SAM9G45_MATRIX_H
 #define AT91SAM9G45_MATRIX_H
 
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	0x18			/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	0x1C			/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	0x20			/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	0x24			/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	0x28			/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	0x2C			/* Master Configuration Register 11 */
 #define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
@@ -37,14 +37,14 @@
 #define			AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
 #define			AT91_MATRIX_ULBT_128		(7 << 0)
 
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	0x58			/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	0x5C			/* Slave Configuration Register 7 */
 #define		AT91_MATRIX_SLOT_CYCLE		(0x1ff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
 #define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
 #define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
@@ -52,22 +52,22 @@
 #define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
 #define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
 
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	0x84			/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	0x8C			/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	0x94			/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	0x9C			/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	0xA4			/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	0xAC			/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	0xB0			/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	0xB4			/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	0xB8			/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	0xBC			/* Priority Register B for Slave 7 */
 #define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
 #define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
 #define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
@@ -81,7 +81,7 @@
 #define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
 #define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
 
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
 #define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
 #define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 #define		AT91_MATRIX_RCB2		(1 << 2)
@@ -95,7 +95,7 @@
 #define		AT91_MATRIX_RCB10		(1 << 10)
 #define		AT91_MATRIX_RCB11		(1 << 11)
 
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x110)	/* TCM Configuration Register */
+#define AT91_MATRIX_TCMR	0x110			/* TCM Configuration Register */
 #define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
 #define			AT91_MATRIX_ITCM_0		(0 << 0)
 #define			AT91_MATRIX_ITCM_32		(6 << 0)
@@ -107,12 +107,12 @@
 #define			AT91_MATRIX_TCM_NO_WS		(0x0 << 11)
 #define			AT91_MATRIX_TCM_ONE_WS		(0x1 << 11)
 
-#define AT91_MATRIX_VIDEO	(AT91_MATRIX + 0x118)	/* Video Mode Configuration Register */
+#define AT91_MATRIX_VIDEO	0x118			/* Video Mode Configuration Register */
 #define		AT91C_VDEC_SEL			(0x1 <<  0) /* Video Mode Selection */
 #define			AT91C_VDEC_SEL_OFF		(0 << 0)
 #define			AT91C_VDEC_SEL_ON		(1 << 0)
 
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x128)	/* EBI Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA	0x128			/* EBI Chip Select Assignment Register */
 #define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
@@ -138,13 +138,13 @@
 #define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
 #define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
 
-#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR	0x1E4			/* Write Protect Mode Register */
 #define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
 #define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
 #define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
 #define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
 
-#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define AT91_MATRIX_WPSR	0x1E8			/* Write Protect Status Register */
 #define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
 #define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
 #define			AT91_MATRIX_WPSR_WPV		(1 << 0)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index d7bead7118da..e0073eb10144 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -69,15 +69,13 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
 #define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
 
 #define AT91SAM9RL_BASE_DMA	0xffffe600
 #define AT91SAM9RL_BASE_ECC	0xffffe800
+#define AT91SAM9RL_BASE_SDRAMC	0xffffea00
 #define AT91SAM9RL_BASE_SMC	0xffffec00
+#define AT91SAM9RL_BASE_MATRIX	0xffffee00
 #define AT91SAM9RL_BASE_DBGU	AT91_BASE_DBGU0
 #define AT91SAM9RL_BASE_PIOA	0xfffff400
 #define AT91SAM9RL_BASE_PIOB	0xfffff600
@@ -88,6 +86,7 @@
 #define AT91SAM9RL_BASE_RTT	0xfffffd20
 #define AT91SAM9RL_BASE_PIT	0xfffffd30
 #define AT91SAM9RL_BASE_WDT	0xfffffd40
+#define AT91SAM9RL_BASE_GPBR	0xfffffd60
 #define AT91SAM9RL_BASE_RTC	0xfffffe00
 
 #define AT91_USART0	AT91SAM9RL_BASE_US0
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
index 5f9149071fe5..6d160adadafc 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -14,12 +14,12 @@
 #ifndef AT91SAM9RL_MATRIX_H
 #define AT91SAM9RL_MATRIX_H
 
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG0	0x00			/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	0x04			/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	0x08			/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	0x0C			/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	0x10			/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	0x14			/* Master Configuration Register 5 */
 #define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
@@ -27,12 +27,12 @@
 #define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
 #define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
 
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG0	0x40			/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	0x44			/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	0x48			/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	0x4C			/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	0x50			/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	0x54			/* Slave Configuration Register 5 */
 #define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
 #define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
 #define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
@@ -43,12 +43,12 @@
 #define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
 #define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
 
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRAS0	0x80			/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	0x88			/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	0x90			/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	0x98			/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	0xA0			/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5	0xA8			/* Priority Register A for Slave 5 */
 #define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
 #define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
 #define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
@@ -56,7 +56,7 @@
 #define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
 #define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
 
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define AT91_MATRIX_MRCR	0x100			/* Master Remap Control Register */
 #define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
 #define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
 #define		AT91_MATRIX_RCB2		(1 << 2)
@@ -64,7 +64,7 @@
 #define		AT91_MATRIX_RCB4		(1 << 4)
 #define		AT91_MATRIX_RCB5		(1 << 5)
 
-#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define AT91_MATRIX_TCMR	0x114			/* TCM Configuration Register */
 #define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
 #define			AT91_MATRIX_ITCM_0		(0 << 0)
 #define			AT91_MATRIX_ITCM_16		(5 << 0)
@@ -74,7 +74,7 @@
 #define			AT91_MATRIX_DTCM_16		(5 << 4)
 #define			AT91_MATRIX_DTCM_32		(6 << 4)
 
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define AT91_MATRIX_EBICSA	0x120			/* EBI0 Chip Select Assignment Register */
 #define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
 #define			AT91_MATRIX_CS1A_SMC		(0 << 1)
 #define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
new file mode 100644
index 000000000000..a297a77d88e2
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -0,0 +1,79 @@
+/*
+ * Chip-specific header file for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9x5 datasheet.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_H
+#define AT91SAM9X5_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91SAM9X5_ID_PIOAB	2	/* Parallel I/O Controller A and B */
+#define AT91SAM9X5_ID_PIOCD	3	/* Parallel I/O Controller C and D */
+#define AT91SAM9X5_ID_SMD	4	/* SMD Soft Modem (SMD) */
+#define AT91SAM9X5_ID_USART0	5	/* USART 0 */
+#define AT91SAM9X5_ID_USART1	6	/* USART 1 */
+#define AT91SAM9X5_ID_USART2	7	/* USART 2 */
+#define AT91SAM9X5_ID_USART3	8	/* USART 3 */
+#define AT91SAM9X5_ID_TWI0	9	/* Two-Wire Interface 0 */
+#define AT91SAM9X5_ID_TWI1	10	/* Two-Wire Interface 1 */
+#define AT91SAM9X5_ID_TWI2	11	/* Two-Wire Interface 2 */
+#define AT91SAM9X5_ID_MCI0	12	/* High Speed Multimedia Card Interface 0 */
+#define AT91SAM9X5_ID_SPI0	13	/* Serial Peripheral Interface 0 */
+#define AT91SAM9X5_ID_SPI1	14	/* Serial Peripheral Interface 1 */
+#define AT91SAM9X5_ID_UART0	15	/* UART 0 */
+#define AT91SAM9X5_ID_UART1	16	/* UART 1 */
+#define AT91SAM9X5_ID_TCB	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define AT91SAM9X5_ID_PWM	18	/* Pulse Width Modulation Controller */
+#define AT91SAM9X5_ID_ADC	19	/* ADC Controller */
+#define AT91SAM9X5_ID_DMA0	20	/* DMA Controller 0 */
+#define AT91SAM9X5_ID_DMA1	21	/* DMA Controller 1 */
+#define AT91SAM9X5_ID_UHPHS	22	/* USB Host High Speed */
+#define AT91SAM9X5_ID_UDPHS	23	/* USB Device High Speed */
+#define AT91SAM9X5_ID_EMAC0	24	/* Ethernet MAC0 */
+#define AT91SAM9X5_ID_LCDC	25	/* LCD Controller */
+#define AT91SAM9X5_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9X5_ID_MCI1	26	/* High Speed Multimedia Card Interface 1 */
+#define AT91SAM9X5_ID_EMAC1	27	/* Ethernet MAC1 */
+#define AT91SAM9X5_ID_SSC	28	/* Synchronous Serial Controller */
+#define AT91SAM9X5_ID_CAN0	29	/* CAN Controller 0 */
+#define AT91SAM9X5_ID_CAN1	30	/* CAN Controller 1 */
+#define AT91SAM9X5_ID_IRQ0	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9X5_BASE_USART0	0xf801c000
+#define AT91SAM9X5_BASE_USART1	0xf8020000
+#define AT91SAM9X5_BASE_USART2	0xf8024000
+
+/*
+ * System Peripherals
+ */
+#define AT91SAM9X5_BASE_DDRSDRC0	0xffffe800
+
+/*
+ * Base addresses for early serial code (uncompress.h)
+ */
+#define AT91_DBGU	AT91_BASE_DBGU0
+#define AT91_USART0	AT91SAM9X5_BASE_USART0
+#define AT91_USART1	AT91SAM9X5_BASE_USART1
+#define AT91_USART2	AT91SAM9X5_BASE_USART2
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9X5_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9X5_SRAM_SIZE	SZ_32K		/* Internal SRAM size (32Kb) */
+
+#define AT91SAM9X5_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9X5_ROM_SIZE	SZ_64K		/* Internal ROM size (64Kb) */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
new file mode 100644
index 000000000000..a606d3966470
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
@@ -0,0 +1,53 @@
+/*
+ * Matrix-centric header file for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2009-2012 Atmel Corporation.
+ *
+ * Only EBI related registers.
+ * Write Protect register definitions may be useful.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#ifndef AT91SAM9X5_MATRIX_H
+#define AT91SAM9X5_MATRIX_H
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH	(1 << 3)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define			AT91_MATRIX_EBI_DBPU_ON			(0 << 8)
+#define			AT91_MATRIX_EBI_DBPU_OFF		(1 << 8)
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+#define		AT91_MATRIX_EBI_EBI_IOSR	(1 << 17)	/* EBI I/O slew rate selection */
+#define			AT91_MATRIX_EBI_EBI_IOSR_REDUCED	(0 << 17)
+#define			AT91_MATRIX_EBI_EBI_IOSR_NORMAL		(1 << 17)
+#define		AT91_MATRIX_EBI_DDR_IOSR	(1 << 18)	/* DDR2 dedicated port I/O slew rate selection */
+#define			AT91_MATRIX_EBI_DDR_IOSR_REDUCED	(0 << 18)
+#define			AT91_MATRIX_EBI_DDR_IOSR_NORMAL		(1 << 18)
+#define		AT91_MATRIX_NFD0_SELECT		(1 << 24)	/* NAND Flash Data Bus Selection */
+#define			AT91_MATRIX_NFD0_ON_D0			(0 << 24)
+#define			AT91_MATRIX_NFD0_ON_D16			(1 << 24)
+#define		AT91_MATRIX_DDR_MP_EN		(1 << 25)	/* DDR Multi-port Enable */
+#define			AT91_MATRIX_MP_OFF			(0 << 25)
+#define			AT91_MATRIX_MP_ON			(1 << 25)
+
+#define AT91_MATRIX_WPMR	(AT91_MATRIX + 0x1E4)	/* Write Protect Mode Register */
+#define		AT91_MATRIX_WPMR_WPEN		(1 << 0)	/* Write Protect ENable */
+#define			AT91_MATRIX_WPMR_WP_WPDIS		(0 << 0)
+#define			AT91_MATRIX_WPMR_WP_WPEN		(1 << 0)
+#define		AT91_MATRIX_WPMR_WPKEY		(0xFFFFFF << 8)	/* Write Protect KEY */
+
+#define AT91_MATRIX_WPSR	(AT91_MATRIX + 0x1E8)	/* Write Protect Status Register */
+#define		AT91_MATRIX_WPSR_WPVS		(1 << 0)	/* Write Protect Violation Status */
+#define			AT91_MATRIX_WPSR_NO_WPV		(0 << 0)
+#define			AT91_MATRIX_WPSR_WPV		(1 << 0)
+#define		AT91_MATRIX_WPSR_WPVSRC		(0xFFFF << 8)	/* Write Protect Violation Source */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
index a57829f4fd18..90680217064e 100644
--- a/arch/arm/mach-at91/include/mach/at91x40.h
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -28,18 +28,18 @@
 #define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
 
 /*
- * System Peripherals (offset from AT91_BASE_SYS)
+ * System Peripherals
  */
 #define AT91_BASE_SYS	0xffc00000
 
-#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
-#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
-#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
-#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
-#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
-#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
-#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
+#define AT91_EBI	0xffe00000	/* External Bus Interface */
+#define AT91_SF		0xfff00000	/* Special Function */
+#define AT91_USART1	0xfffcc000	/* USART 1 */
+#define AT91_USART0	0xfffd0000	/* USART 0 */
+#define AT91_TC		0xfffe0000	/* Timer Counter */
+#define AT91_PIOA	0xffff0000	/* PIO Controller A */
+#define AT91_PS		0xffff4000	/* Power Save */
+#define AT91_WD		0xffff8000	/* Watchdog Timer */
 
 /*
  * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 3b33f07b1e11..dc8d6d4f17cf 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -107,6 +107,8 @@ struct atmel_nand_data {
 	u8		ale;		/* address line number connected to ALE */
 	u8		cle;		/* address line number connected to CLE */
 	u8		bus_width_16;	/* buswidth is 16 bit */
+	u8		correction_cap; /* PMECC correction capability */
+	u16		sector_size;    /* Sector size for PMECC */
 	struct mtd_partition *parts;
 	unsigned int	num_parts;
 };
@@ -179,7 +181,9 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
 extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 
  /* ISI */
-extern void __init at91_add_device_isi(void);
+struct isi_platform_data;
+extern void __init at91_add_device_isi(struct isi_platform_data *data,
+		bool use_pck_as_mck);
 
  /* Touchscreen Controller */
 struct at91_tsadcc_data {
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index f6ce936dba2b..0118c3338552 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -25,7 +25,6 @@
 #define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
 #define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91SAM9X5	0x819a05a0
-#define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
 #define ARCH_ID_AT91SAM9XE256	0x329a93a0
@@ -51,10 +50,6 @@
 #define ARCH_FAMILY_AT91SAM9	0x01900000
 #define ARCH_FAMILY_AT91SAM9XE	0x02900000
 
-/* PMC revision */
-#define ARCH_REVISION_CAP9_B	0x399
-#define ARCH_REVISION_CAP9_C	0x601
-
 /* RM9200 type */
 #define ARCH_REVISON_9200_BGA	(0 << 0)
 #define ARCH_REVISON_9200_PQFP	(1 << 0)
@@ -63,9 +58,6 @@ enum at91_soc_type {
 	/* 920T */
 	AT91_SOC_RM9200,
 
-	/* CAP */
-	AT91_SOC_CAP9,
-
 	/* SAM92xx */
 	AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263,
 
@@ -86,9 +78,6 @@ enum at91_soc_subtype {
 	/* RM9200 */
 	AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP,
 
-	/* CAP9 */
-	AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C,
-
 	/* SAM9260 */
 	AT91_SOC_SAM9XE,
 
@@ -195,16 +184,6 @@ static inline int at91_soc_is_detected(void)
 #define cpu_is_at91sam9x25()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT91CAP9
-#define cpu_is_at91cap9()	(at91_soc_initdata.type == AT91_SOC_CAP9)
-#define cpu_is_at91cap9_revB()	(at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B)
-#define cpu_is_at91cap9_revC()	(at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C)
-#else
-#define cpu_is_at91cap9()	(0)
-#define cpu_is_at91cap9_revB()	(0)
-#define cpu_is_at91cap9_revC()	(0)
-#endif
-
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 2d0e4e998566..e9e29a6c3868 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -19,7 +19,7 @@
 /* DBGU base */
 /* rm9200, 9260/9g20, 9261/9g10, 9rl */
 #define AT91_BASE_DBGU0	0xfffff200
-/* 9263, 9g45, cap9 */
+/* 9263, 9g45 */
 #define AT91_BASE_DBGU1	0xffffee00
 
 #if defined(CONFIG_ARCH_AT91RM9200)
@@ -34,8 +34,8 @@
 #include <mach/at91sam9rl.h>
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9g45.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91SAM9X5)
+#include <mach/at91sam9x5.h>
 #elif defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
 #else
@@ -59,9 +59,10 @@
 
 /*
  * On all at91 have the Advanced Interrupt Controller starts at address
- * 0xfffff000
+ * 0xfffff000 and the Power Management Controller starts at 0xfffffc00
  */
 #define AT91_AIC	0xfffff000
+#define AT91_PMC	0xfffffc00
 
 /*
  * Peripheral identifiers/interrupts.
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
index 4ca09ef7ca29..4003001eca3d 100644
--- a/arch/arm/mach-at91/include/mach/io.h
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -28,22 +28,4 @@
 #define __io(a)		__typesafe_io(a)
 #define __mem_pci(a)	(a)
 
-#ifndef __ASSEMBLY__
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	__raw_writel(value, addr + reg_offset);
-}
-
-#endif
-
 #endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
deleted file mode 100644
index cbd64f3bcecd..000000000000
--- a/arch/arm/mach-at91/include/mach/system.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-#ifdef AT91_PS
-	at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Post-RM9200 processors need this in conjunction with the above
-	 * to save power when idle.
-	 */
-	cpu_do_idle();
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 1606379ac284..6c9d5e69ac28 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -136,7 +136,7 @@ static int at91_pm_verify_clocks(void)
 	unsigned long scsr;
 	int i;
 
-	scsr = at91_sys_read(AT91_PMC_SCSR);
+	scsr = at91_pmc_read(AT91_PMC_SCSR);
 
 	/* USB must not be using PLLB */
 	if (cpu_is_at91rm9200()) {
@@ -150,11 +150,6 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91cap9()) {
-		if ((scsr & AT91CAP9_PMC_UHP) != 0) {
-			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
-			return 0;
-		}
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
@@ -165,7 +160,7 @@ static int at91_pm_verify_clocks(void)
 		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
 			continue;
 
-		css = at91_sys_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		css = at91_pmc_read(AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
 		if (css != AT91_PMC_CSS_SLOW) {
 			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
 			return 0;
@@ -193,23 +188,36 @@ int at91_suspend_entering_slow_clock(void)
 EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
 
 
-static void (*slow_clock)(void);
+static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
+			  void __iomem *ramc1, int memctrl);
 
 #ifdef CONFIG_AT91_SLOW_CLOCK
-extern void at91_slow_clock(void);
+extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
+			    void __iomem *ramc1, int memctrl);
 extern u32 at91_slow_clock_sz;
 #endif
 
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+	if (id < 0 || id > 1) {
+		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+		BUG();
+	}
+	at91_ramc_base[id] = ioremap(addr, size);
+	if (!at91_ramc_base[id])
+		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
 
 static int at91_pm_enter(suspend_state_t state)
 {
-	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();
 
 	pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
 			/* remember all the always-wake irqs */
-			(at91_sys_read(AT91_PMC_PCSR)
+			(at91_pmc_read(AT91_PMC_PCSR)
 					| (1 << AT91_ID_FIQ)
 					| (1 << AT91_ID_SYS)
 					| (at91_extern_irq))
@@ -234,11 +242,18 @@ static int at91_pm_enter(suspend_state_t state)
 			 * turning off the main oscillator; reverse on wakeup.
 			 */
 			if (slow_clock) {
+				int memctrl = AT91_MEMCTRL_SDRAMC;
+
+				if (cpu_is_at91rm9200())
+					memctrl = AT91_MEMCTRL_MC;
+				else if (cpu_is_at91sam9g45())
+					memctrl = AT91_MEMCTRL_DDRSDR;
 #ifdef CONFIG_AT91_SLOW_CLOCK
 				/* copy slow_clock handler to SRAM, and call it */
 				memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
 #endif
-				slow_clock();
+				slow_clock(at91_pmc_base, at91_ramc_base[0],
+					   at91_ramc_base[1], memctrl);
 				break;
 			} else {
 				pr_info("AT91: PM - no slow clock mode enabled ...\n");
@@ -259,16 +274,7 @@ static int at91_pm_enter(suspend_state_t state)
 			 * For ARM 926 based chips, this requirement is weaker
 			 * as at91sam9 can access a RAM in self-refresh mode.
 			 */
-			asm volatile (	"mov r0, #0\n\t"
-					"b 1f\n\t"
-					".align 5\n\t"
-					"1: mcr p15, 0, r0, c7, c10, 4\n\t"
-					: /* no output */
-					: /* no input */
-					: "r0");
-			saved_lpr = sdram_selfrefresh_enable();
-			wait_for_interrupt_enable();
-			sdram_selfrefresh_disable(saved_lpr);
+			at91_standby();
 			break;
 
 		case PM_SUSPEND_ON:
@@ -316,7 +322,7 @@ static int __init at91_pm_init(void)
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
-	at91_sys_write(AT91_SDRAMC_LPR, 0);
+	at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
 #endif
 
 	suspend_set_ops(&at91_pm_ops);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 7eb40d24242f..89f56f3a802e 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -1,5 +1,19 @@
+/*
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ARCH_ARM_MACH_AT91_PM
+#define __ARCH_ARM_MACH_AT91_PM
+
+#include <mach/at91_ramc.h>
 #ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
+#include <mach/at91rm9200_sdramc.h>
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -11,51 +25,37 @@
  * still in self-refresh is "not recommended", but seems to work.
  */
 
-static inline u32 sdram_selfrefresh_enable(void)
+static inline void at91rm9200_standby(void)
 {
-	u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
-	at91_sys_write(AT91_SDRAMC_LPR, 0);
-	at91_sys_write(AT91_SDRAMC_SRR, 1);
-	return saved_lpr;
+	u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
+
+	asm volatile(
+		"b    1f\n\t"
+		".align    5\n\t"
+		"1:  mcr    p15, 0, %0, c7, c10, 4\n\t"
+		"    str    %0, [%1, %2]\n\t"
+		"    str    %3, [%1, %4]\n\t"
+		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
+		"    str    %5, [%1, %2]"
+		:
+		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
+		  "r" (lpr));
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-#define wait_for_interrupt_enable()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" \
-								: : "r" (0))
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91sam9_ddrsdr.h>
-
-
-static inline u32 sdram_selfrefresh_enable(void)
-{
-	u32 saved_lpr, lpr;
-
-	saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
-
-	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-	return saved_lpr;
-}
-
-#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
-#define wait_for_interrupt_enable()		cpu_do_idle()
+#define at91_standby at91rm9200_standby
 
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
-#include <mach/at91sam9_ddrsdr.h>
 
 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
  * remember.
  */
-static u32 saved_lpr1;
-
-static inline u32 sdram_selfrefresh_enable(void)
+static inline void at91sam9g45_standby(void)
 {
-	/* Those tow values allow us to delay self-refresh activation
+	/* Those two values allow us to delay self-refresh activation
 	 * to the maximum. */
 	u32 lpr0, lpr1;
-	u32 saved_lpr0;
+	u32 saved_lpr0, saved_lpr1;
 
 	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
 	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
@@ -69,18 +69,15 @@ static inline u32 sdram_selfrefresh_enable(void)
 	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
 	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
 
-	return saved_lpr0;
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+	at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
 }
 
-#define sdram_selfrefresh_disable(saved_lpr0)	\
-	do { \
-		at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
-		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
-	} while (0)
-#define wait_for_interrupt_enable()		cpu_do_idle()
+#define at91_standby at91sam9g45_standby
 
 #else
-#include <mach/at91sam9_sdramc.h>
 
 #ifdef CONFIG_ARCH_AT91SAM9263
 /*
@@ -90,18 +87,23 @@ static inline u32 sdram_selfrefresh_enable(void)
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
-static inline u32 sdram_selfrefresh_enable(void)
+static inline void at91sam9_standby(void)
 {
 	u32 saved_lpr, lpr;
 
 	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
 
 	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-	return saved_lpr;
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
+			AT91_SDRAMC_LPCB_SELF_REFRESH);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
-#define wait_for_interrupt_enable()		cpu_do_idle()
+#define at91_standby at91sam9_standby
+
+#endif
 
 #endif
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index 92dfb8461392..db5452123f17 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -15,15 +15,7 @@
 #include <linux/linkage.h>
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
-#include <mach/at91sam9_ddrsdr.h>
-#else
-#include <mach/at91sam9_sdramc.h>
-#endif
+#include <mach/at91_ramc.h>
 
 
 #ifdef CONFIG_ARCH_AT91SAM9263
@@ -47,17 +39,23 @@
 #define PLLALOCK_TIMEOUT	1000
 #define PLLBLOCK_TIMEOUT	1000
 
+pmc	.req	r0
+sdramc	.req	r1
+ramc1	.req	r2
+memctrl	.req	r3
+tmp1	.req	r4
+tmp2	.req	r5
 
 /*
  * Wait until master clock is ready (after switching master clock source)
  */
 	.macro wait_mckrdy
-	mov	r4, #MCKRDY_TIMEOUT
-1:	sub	r4, r4, #1
-	cmp	r4, #0
+	mov	tmp2, #MCKRDY_TIMEOUT
+1:	sub	tmp2, tmp2, #1
+	cmp	tmp2, #0
 	beq	2f
-	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-	tst	r3, #AT91_PMC_MCKRDY
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MCKRDY
 	beq	1b
 2:
 	.endm
@@ -66,12 +64,12 @@
  * Wait until master oscillator has stabilized.
  */
 	.macro wait_moscrdy
-	mov	r4, #MOSCRDY_TIMEOUT
-1:	sub	r4, r4, #1
-	cmp	r4, #0
+	mov	tmp2, #MOSCRDY_TIMEOUT
+1:	sub	tmp2, tmp2, #1
+	cmp	tmp2, #0
 	beq	2f
-	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-	tst	r3, #AT91_PMC_MOSCS
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCS
 	beq	1b
 2:
 	.endm
@@ -80,12 +78,12 @@
  * Wait until PLLA has locked.
  */
 	.macro wait_pllalock
-	mov	r4, #PLLALOCK_TIMEOUT
-1:	sub	r4, r4, #1
-	cmp	r4, #0
+	mov	tmp2, #PLLALOCK_TIMEOUT
+1:	sub	tmp2, tmp2, #1
+	cmp	tmp2, #0
 	beq	2f
-	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-	tst	r3, #AT91_PMC_LOCKA
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
 	beq	1b
 2:
 	.endm
@@ -94,80 +92,98 @@
  * Wait until PLLB has locked.
  */
 	.macro wait_pllblock
-	mov	r4, #PLLBLOCK_TIMEOUT
-1:	sub	r4, r4, #1
-	cmp	r4, #0
+	mov	tmp2, #PLLBLOCK_TIMEOUT
+1:	sub	tmp2, tmp2, #1
+	cmp	tmp2, #0
 	beq	2f
-	ldr	r3, [r1, #(AT91_PMC_SR - AT91_PMC)]
-	tst	r3, #AT91_PMC_LOCKB
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKB
 	beq	1b
 2:
 	.endm
 
 	.text
 
+/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
+ *			void __iomem *ramc1, int memctrl)
+ */
 ENTRY(at91_slow_clock)
 	/* Save registers on stack */
-	stmfd	sp!, {r0 - r12, lr}
+	stmfd	sp!, {r4 - r12, lr}
 
 	/*
 	 * Register usage:
-	 *  R1 = Base address of AT91_PMC
-	 *  R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
-	 *  R3 = temporary register
+	 *  R0 = Base address of AT91_PMC
+	 *  R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
+	 *  R2 = Base address of second RAM Controller or 0 if not present
+	 *  R3 = Memory controller
 	 *  R4 = temporary register
-	 *  R5 = Base address of second RAM Controller or 0 if not present
+	 *  R5 = temporary register
 	 */
-	ldr	r1, .at91_va_base_pmc
-	ldr	r2, .at91_va_base_sdramc
-	ldr	r5, .at91_va_base_ramc1
 
 	/* Drain write buffer */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c10, 4
+	mov	tmp1, #0
+	mcr	p15, 0, tmp1, c7, c10, 4
+
+	cmp	memctrl, #AT91_MEMCTRL_MC
+	bne	ddr_sr_enable
 
-#ifdef CONFIG_ARCH_AT91RM9200
+	/*
+	 * at91rm9200 Memory controller
+	 */
 	/* Put SDRAM in self-refresh mode */
-	mov	r3, #1
-	str	r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	mov	tmp1, #1
+	str	tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
+	b	sdr_sr_done
+
+	/*
+	 * DDRSDR Memory controller
+	 */
+ddr_sr_enable:
+	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
+	bne	sdr_sr_enable
 
 	/* prepare for DDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
-	str	r3, .saved_sam9_lpr
-	bic	r3, #AT91_DDRSDRC_LPCB
-	orr	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	ldr	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+	str	tmp1, .saved_sam9_lpr
+	bic	tmp1, #AT91_DDRSDRC_LPCB
+	orr	tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 
 	/* figure out if we use the second ram controller */
-	cmp	r5, #0
-	ldrne	r4, [r5, #AT91_DDRSDRC_LPR]
-	strne	r4, .saved_sam9_lpr1
-	bicne	r4, #AT91_DDRSDRC_LPCB
-	orrne	r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	cmp	ramc1, #0
+	ldrne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+	strne	tmp2, .saved_sam9_lpr1
+	bicne	tmp2, #AT91_DDRSDRC_LPCB
+	orrne	tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
 
 	/* Enable DDRAM self-refresh mode */
-	str	r3, [r2, #AT91_DDRSDRC_LPR]
-	strne	r4, [r5, #AT91_DDRSDRC_LPR]
-#else
+	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+
+	b	sdr_sr_done
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdr_sr_enable:
 	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_SDRAMC_LPR]
-	str	r3, .saved_sam9_lpr
+	ldr	tmp1, [sdramc, #AT91_SDRAMC_LPR]
+	str	tmp1, .saved_sam9_lpr
 
-	bic	r3, #AT91_SDRAMC_LPCB
-	orr	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_SDRAMC_LPR]
-#endif
+	bic	tmp1, #AT91_SDRAMC_LPCB
+	orr	tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
 
+sdr_sr_done:
 	/* Save Master clock setting */
-	ldr	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
-	str	r3, .saved_mckr
+	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, .saved_mckr
 
 	/*
 	 * Set the Master clock source to slow clock
 	 */
-	bic	r3, r3, #AT91_PMC_CSS
-	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 
@@ -177,61 +193,61 @@ ENTRY(at91_slow_clock)
 	 *
 	 * See AT91RM9200 errata #27 and #28 for details.
 	 */
-	mov	r3, #0
-	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	mov	tmp1, #0
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 #endif
 
 	/* Save PLLA setting and disable it */
-	ldr	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
-	str	r3, .saved_pllar
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
 
-	mov	r3, #AT91_PMC_PLLCOUNT
-	orr	r3, r3, #(1 << 29)		/* bit 29 always set */
-	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
 	/* Save PLLB setting and disable it */
-	ldr	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
-	str	r3, .saved_pllbr
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLBR]
+	str	tmp1, .saved_pllbr
 
-	mov	r3, #AT91_PMC_PLLCOUNT
-	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
 
 	/* Turn off the main oscillator */
-	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-	bic	r3, r3, #AT91_PMC_MOSCEN
-	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Wait for interrupt */
-	mcr	p15, 0, r0, c7, c0, 4
+	mcr	p15, 0, tmp1, c7, c0, 4
 
 	/* Turn on the main oscillator */
-	ldr	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
-	orr	r3, r3, #AT91_PMC_MOSCEN
-	str	r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)]
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	wait_moscrdy
 
 	/* Restore PLLB setting */
-	ldr	r3, .saved_pllbr
-	str	r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)]
+	ldr	tmp1, .saved_pllbr
+	str	tmp1, [pmc, #AT91_CKGR_PLLBR]
 
-	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	1f
-	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
 	beq	2f
 1:
 	wait_pllblock
 2:
 
 	/* Restore PLLA setting */
-	ldr	r3, .saved_pllar
-	str	r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)]
+	ldr	tmp1, .saved_pllar
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
 
-	tst	r3, #(AT91_PMC_MUL &  0xff0000)
+	tst	tmp1, #(AT91_PMC_MUL &  0xff0000)
 	bne	3f
-	tst	r3, #(AT91_PMC_MUL & ~0xff0000)
+	tst	tmp1, #(AT91_PMC_MUL & ~0xff0000)
 	beq	4f
 3:
 	wait_pllalock
@@ -244,11 +260,11 @@ ENTRY(at91_slow_clock)
 	 *
 	 * See AT91RM9200 errata #27 and #28 for details.
 	 */
-	ldr	r3, .saved_mckr
-	tst	r3, #AT91_PMC_PRES
+	ldr	tmp1, .saved_mckr
+	tst	tmp1, #AT91_PMC_PRES
 	beq	2f
-	and	r3, r3, #AT91_PMC_PRES
-	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+	and	tmp1, tmp1, #AT91_PMC_PRES
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 #endif
@@ -256,32 +272,45 @@ ENTRY(at91_slow_clock)
 	/*
 	 * Restore master clock setting
 	 */
-2:	ldr	r3, .saved_mckr
-	str	r3, [r1, #(AT91_PMC_MCKR - AT91_PMC)]
+2:	ldr	tmp1, .saved_mckr
+	str	tmp1, [pmc, #AT91_PMC_MCKR]
 
 	wait_mckrdy
 
-#ifdef CONFIG_ARCH_AT91RM9200
-	/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	/*
+	 * at91rm9200 Memory controller
+	 * Do nothing - self-refresh is automatically disabled.
+	 */
+	cmp	memctrl, #AT91_MEMCTRL_MC
+	beq	ram_restored
+
+	/*
+	 * DDRSDR Memory controller
+	 */
+	cmp	memctrl, #AT91_MEMCTRL_DDRSDR
+	bne	sdr_en_restore
 	/* Restore LPR on AT91 with DDRAM */
-	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	ldr	tmp1, .saved_sam9_lpr
+	str	tmp1, [sdramc, #AT91_DDRSDRC_LPR]
 
 	/* if we use the second ram controller */
-	cmp	r5, #0
-	ldrne	r4, .saved_sam9_lpr1
-	strne	r4, [r5, #AT91_DDRSDRC_LPR]
+	cmp	ramc1, #0
+	ldrne	tmp2, .saved_sam9_lpr1
+	strne	tmp2, [ramc1, #AT91_DDRSDRC_LPR]
+
+	b	ram_restored
 
-#else
+	/*
+	 * SDRAMC Memory controller
+	 */
+sdr_en_restore:
 	/* Restore LPR on AT91 with SDRAM */
-	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_SDRAMC_LPR]
-#endif
+	ldr	tmp1, .saved_sam9_lpr
+	str	tmp1, [sdramc, #AT91_SDRAMC_LPR]
 
+ram_restored:
 	/* Restore registers, and return */
-	ldmfd	sp!, {r0 - r12, pc}
+	ldmfd	sp!, {r4 - r12, pc}
 
 
 .saved_mckr:
@@ -299,27 +328,5 @@ ENTRY(at91_slow_clock)
 .saved_sam9_lpr1:
 	.word 0
 
-.at91_va_base_pmc:
-	.word AT91_VA_BASE_SYS + AT91_PMC
-
-#ifdef CONFIG_ARCH_AT91RM9200
-.at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45)
-.at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
-#else
-.at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
-#endif
-
-.at91_va_base_ramc1:
-#if defined(CONFIG_ARCH_AT91SAM9G45)
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
-#else
-	.word 0
-#endif
-
 ENTRY(at91_slow_clock_sz)
 	.word .-at91_slow_clock
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 69d3fc4c46f3..372396c2ecb6 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -86,20 +86,6 @@ static void __init soc_detect(u32 dbgu_base)
 	socid = cidr & ~AT91_CIDR_VERSION;
 
 	switch (socid) {
-	case ARCH_ID_AT91CAP9: {
-#ifdef CONFIG_AT91_PMC_UNIT
-		u32 pmc_ver = at91_sys_read(AT91_PMC_VER);
-
-		if (pmc_ver == ARCH_REVISION_CAP9_B)
-			at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B;
-		else if (pmc_ver == ARCH_REVISION_CAP9_C)
-			at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C;
-#endif
-		at91_soc_initdata.type = AT91_SOC_CAP9;
-		at91_boot_soc = at91cap9_soc;
-		break;
-	}
-
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
 		at91_boot_soc = at91rm9200_soc;
@@ -200,7 +186,6 @@ static void __init soc_detect(u32 dbgu_base)
 
 static const char *soc_name[] = {
 	[AT91_SOC_RM9200]	= "at91rm9200",
-	[AT91_SOC_CAP9]		= "at91cap9",
 	[AT91_SOC_SAM9260]	= "at91sam9260",
 	[AT91_SOC_SAM9261]	= "at91sam9261",
 	[AT91_SOC_SAM9263]	= "at91sam9263",
@@ -221,8 +206,6 @@ EXPORT_SYMBOL(at91_get_soc_type);
 static const char *soc_subtype_name[] = {
 	[AT91_SOC_RM9200_BGA]	= "at91rm9200 BGA",
 	[AT91_SOC_RM9200_PQFP]	= "at91rm9200 PQFP",
-	[AT91_SOC_CAP9_REV_B]	= "at91cap9 revB",
-	[AT91_SOC_CAP9_REV_C]	= "at91cap9 revC",
 	[AT91_SOC_SAM9XE]	= "at91sam9xe",
 	[AT91_SOC_SAM9G45ES]	= "at91sam9g45es",
 	[AT91_SOC_SAM9M10]	= "at91sam9m10",
@@ -293,6 +276,15 @@ void __init at91_ioremap_rstc(u32 base_addr)
 		panic("Impossible to ioremap at91_rstc_base\n");
 }
 
+void __iomem *at91_matrix_base;
+
+void __init at91_ioremap_matrix(u32 base_addr)
+{
+	at91_matrix_base = ioremap(base_addr, 512);
+	if (!at91_matrix_base)
+		panic("Impossible to ioremap at91_matrix_base\n");
+}
+
 void __init at91_initialize(unsigned long main_clock)
 {
 	at91_boot_soc.ioremap_registers();
diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h
index 4588ae6f7acd..5db4aa45404a 100644
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@@ -13,7 +13,6 @@ struct at91_init_soc {
 };
 
 extern struct at91_init_soc at91_boot_soc;
-extern struct at91_init_soc at91cap9_soc;
 extern struct at91_init_soc at91rm9200_soc;
 extern struct at91_init_soc at91sam9260_soc;
 extern struct at91_init_soc at91sam9261_soc;
@@ -27,10 +26,6 @@ static inline int at91_soc_is_enabled(void)
 	return at91_boot_soc.init != NULL;
 }
 
-#if !defined(CONFIG_ARCH_AT91CAP9)
-#define at91cap9_soc	at91_boot_soc
-#endif
-
 #if !defined(CONFIG_ARCH_AT91RM9200)
 #define at91rm9200_soc	at91_boot_soc
 #endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 6b67b7e8426c..22e4e0a28ad1 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,27 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-#define AMBA_DEVICE(name, initname, base, plat, size)       \
-static struct amba_device name##_device = {     \
-   .dev = {                                     \
-      .coherent_dma_mask = ~0,                  \
-      .init_name = initname,                    \
-      .platform_data = plat                     \
-   },                                           \
-   .res = {                                     \
-      .start = MM_ADDR_IO_##base,               \
-		.end = MM_ADDR_IO_##base + (size) - 1,    \
-      .flags = IORESOURCE_MEM                   \
-   },                                           \
-   .dma_mask = ~0,                              \
-   .irq = {                                     \
-      IRQ_##base                                \
-   }                                            \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
deleted file mode 100644
index cb78250db649..000000000000
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ab1711b9b4d6..8736c1acc166 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -225,3 +225,19 @@ void clps711x_restart(char mode, const char *cmd)
 {
 	soft_restart(0);
 }
+
+static void clps711x_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov    r0, r0\n\
+	mov     r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+	arm_pm_idle = clps711x_idle;
+	return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
deleted file mode 100644
index 23d6ef8c84da..000000000000
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  arch/arm/mach-clps711x/include/mach/system.h
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
-	clps_writel(1, HALT);
-	__asm__ __volatile__(
-	"mov	r0, r0\n\
-	mov	r0, r0");
-}
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
deleted file mode 100644
index 9e56b7dc133a..000000000000
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
deleted file mode 100644
index fcb7a015aba5..000000000000
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
deleted file mode 100644
index 3027954f6162..000000000000
--- a/arch/arm/mach-dove/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 294aad07f7a0..804c9122b7b3 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -271,8 +271,33 @@ static struct platform_device *ebsa110_devices[] = {
 	&am79c961_device,
 };
 
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
 static int __init ebsa110_init(void)
 {
+	arm_pm_idle = ebsa110_idle;
 	return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
 }
 
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
deleted file mode 100644
index 2e4af65edb6f..000000000000
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- *  arch/arm/mach-ebsa110/include/mach/system.h
- *
- *  Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
-	const char *irq_stat = (char *)0xff000000;
-
-	/* disable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
-	/* wait for an interrupt to occur */
-	while (!*irq_stat);
-
-	/* enable clock switching */
-	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 24203f9a6796..903edb02fe4f 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -279,48 +279,14 @@ static struct amba_pl010_data ep93xx_uart_data = {
 	.set_mctrl	= ep93xx_uart_set_mctrl,
 };
 
-static struct amba_device uart1_device = {
-	.dev		= {
-		.init_name	= "apb:uart1",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART1_PHYS_BASE,
-		.end	= EP93XX_UART1_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART1, NO_IRQ },
-	.periphid	= 0x00041010,
-};
-
-static struct amba_device uart2_device = {
-	.dev		= {
-		.init_name	= "apb:uart2",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART2_PHYS_BASE,
-		.end	= EP93XX_UART2_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART2, NO_IRQ },
-	.periphid	= 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+	{ IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
 
-static struct amba_device uart3_device = {
-	.dev		= {
-		.init_name	= "apb:uart3",
-		.platform_data	= &ep93xx_uart_data,
-	},
-	.res		= {
-		.start	= EP93XX_UART3_PHYS_BASE,
-		.end	= EP93XX_UART3_PHYS_BASE + 0x0fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_EP93XX_UART3, NO_IRQ },
-	.periphid	= 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+	{ IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
 
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+	{ IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
 
 static struct resource ep93xx_rtc_resource[] = {
 	{
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
deleted file mode 100644
index b5bec7cb9b52..000000000000
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index c59e18871006..031c1e5b3dfe 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -201,14 +201,6 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
 	},
 };
 
-static void exynos_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -467,10 +459,6 @@ early_initcall(exynos4_l2x0_cache_init);
 int __init exynos_init(void)
 {
 	printk(KERN_INFO "EXYNOS: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = exynos_idle;
-
 	return device_register(&exynos4_dev);
 }
 
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index b10fcd270f07..91370def4a70 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -74,21 +74,8 @@ struct dma_pl330_platdata exynos4_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device exynos4_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma0_pdata,
-	},
-	.res = {
-		.start = EXYNOS4_PA_PDMA0,
-		.end = EXYNOS4_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330, EXYNOS4_PA_PDMA0,
+	{IRQ_PDMA0}, &exynos4_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_PCM0_RX,
@@ -123,21 +110,8 @@ struct dma_pl330_platdata exynos4_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device exynos4_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &exynos4_pdma1_pdata,
-	},
-	.res = {
-		.start = EXYNOS4_PA_PDMA1,
-		.end = EXYNOS4_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(exynos4_pdma1,  "dma-pl330.1", 0x00041330, EXYNOS4_PA_PDMA1,
+	{IRQ_PDMA1}, &exynos4_pdma1_pdata);
 
 static int __init exynos4_dma_init(void)
 {
@@ -146,11 +120,11 @@ static int __init exynos4_dma_init(void)
 
 	dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
-	amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+	amba_device_register(&exynos4_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
-	amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+	amba_device_register(&exynos4_pdma1_device, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
deleted file mode 100644
index 0063a6de3dc8..000000000000
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
deleted file mode 100644
index a174a5841bc2..000000000000
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index c5b24b95a76e..7355c0bbcb5e 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= irq.o mm.o time.o devices.o gpio.o
+obj-y			:= irq.o mm.o time.o devices.o gpio.o idle.o
 
 # Board-specific support
 obj-$(CONFIG_MACH_NAS4220B)	+= board-nas4220b.o
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
new file mode 100644
index 000000000000..92bbd6bb600a
--- /dev/null
+++ b/arch/arm/mach-gemini/idle.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+	/*
+	 * Because of broken hardware we have to enable interrupts or the CPU
+	 * will never wakeup... Acctualy it is not very good to enable
+	 * interrupts first since scheduler can miss a tick, but there is
+	 * no other way around this. Platforms that needs it for power saving
+	 * should call enable_hlt() in init code, since by default it is
+	 * disabled.
+	 */
+	local_irq_enable();
+	cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+	arm_pm_idle = gemini_idle;
+	return 0;
+}
+
+arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index 4d9c1f872472..a33b5a1f8ab4 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -14,20 +14,6 @@
 #include <mach/hardware.h>
 #include <mach/global_reg.h>
 
-static inline void arch_idle(void)
-{
-	/*
-	 * Because of broken hardware we have to enable interrupts or the CPU
-	 * will never wakeup... Acctualy it is not very good to enable
-	 * interrupts here since scheduler can miss a tick, but there is
-	 * no other way around this. Platforms that needs it for power saving
-	 * should call enable_hlt() in init code, since by default it is
-	 * disabled.
-	 */
-	local_irq_enable();
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	__raw_writel(RESET_GLOBAL | RESET_CPU1,
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 9485a8fdf851..ca70e5fcc7ac 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -73,8 +73,8 @@ void __init gemini_init_irq(void)
 	unsigned int i, mode = 0, level = 0;
 
 	/*
-	 * Disable arch_idle() by default since it is buggy
-	 * For more info see arch/arm/mach-gemini/include/mach/system.h
+	 * Disable the idle handler by default since it is buggy
+	 * For more info see arch/arm/mach-gemini/idle.c
 	 */
 	disable_hlt();
 
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index f8a2f6bb5483..e756d1ac00c2 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -247,3 +247,21 @@ void h720x_restart(char mode, const char *cmd)
 {
 	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
 }
+
+static void h720x__idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+	arm_pm_idle = h720x__idle;
+	return 0;
+}
+
+arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
deleted file mode 100644
index 16ac46e239aa..000000000000
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
-	nop();
-	nop();
-	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
-	nop();
-	nop();
-}
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-highbank/include/mach/system.h
deleted file mode 100644
index b1d8b5fbe373..000000000000
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2010-2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 31807d2a8b7b..8404ee72555a 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,31 +34,29 @@ static void imx3_idle(void)
 {
 	unsigned long reg = 0;
 
-	if (!need_resched())
-		__asm__ __volatile__(
-			/* disable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"bic %0, %0, #0x00001000\n"
-			"bic %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			/* invalidate I cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c5, 0\n"
-			/* clear and invalidate D cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c14, 0\n"
-			/* WFI */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c0, 4\n"
-			"nop\n" "nop\n" "nop\n" "nop\n"
-			"nop\n" "nop\n" "nop\n"
-			/* enable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"orr %0, %0, #0x00001000\n"
-			"orr %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			: "=r" (reg));
-	local_irq_enable();
+	__asm__ __volatile__(
+		/* disable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"bic %0, %0, #0x00001000\n"
+		"bic %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		/* invalidate I cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c5, 0\n"
+		/* clear and invalidate D cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c14, 0\n"
+		/* WFI */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c0, 4\n"
+		"nop\n" "nop\n" "nop\n" "nop\n"
+		"nop\n" "nop\n" "nop\n"
+		/* enable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"orr %0, %0, #0x00001000\n"
+		"orr %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		: "=r" (reg));
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@ void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
+	arm_pm_idle = imx3_idle;
 }
 
 void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@ void __init imx35_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX35);
 	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	pm_idle = imx3_idle;
+	arm_pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfea3817..49549a72dc7d 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -26,23 +26,17 @@ static struct clk *gpc_dvfs_clk;
 
 static void imx5_idle(void)
 {
-	if (!need_resched()) {
-		/* gpc clock is needed for SRPG */
-		if (gpc_dvfs_clk == NULL) {
-			gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-			if (IS_ERR(gpc_dvfs_clk))
-				goto err0;
-		}
-		clk_enable(gpc_dvfs_clk);
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-		if (tzic_enable_wake())
-			goto err1;
-		cpu_do_idle();
-err1:
-		clk_disable(gpc_dvfs_clk);
+	/* gpc clock is needed for SRPG */
+	if (gpc_dvfs_clk == NULL) {
+		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+		if (IS_ERR(gpc_dvfs_clk))
+			return;
 	}
-err0:
-	local_irq_enable();
+	clk_enable(gpc_dvfs_clk);
+	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (tzic_enable_wake() != 0)
+		cpu_do_idle();
+	clk_disable(gpc_dvfs_clk);
 }
 
 /*
@@ -108,7 +102,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	pm_idle = imx5_idle;
+	arm_pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index e455d2f855bf..6fcffa7db978 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,6 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 #include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@ static int mx27_suspend_enter(suspend_state_t state)
 		cscr &= 0xFFFFFFFC;
 		__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
 		/* Executes WFI */
-		arch_idle();
+		cpu_do_idle();
 		break;
 
 	default:
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab08f66..15b87f26ac96 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -35,67 +35,23 @@
 
 static struct amba_pl010_data integrator_uart_data;
 
-static struct amba_device rtc_device = {
-	.dev		= {
-		.init_name = "mb:15",
-	},
-	.res		= {
-		.start	= INTEGRATOR_RTC_BASE,
-		.end	= INTEGRATOR_RTC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ	{ IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ	{ IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ	{ IRQ_UARTINT1 }
+#define KMI0_IRQ		{ IRQ_KMIINT0 }
+#define KMI1_IRQ		{ IRQ_KMIINT1 }
 
-static struct amba_device uart0_device = {
-	.dev		= {
-		.init_name = "mb:16",
-		.platform_data = &integrator_uart_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_UART0_BASE,
-		.end	= INTEGRATOR_UART0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+	INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
 
-static struct amba_device uart1_device = {
-	.dev		= {
-		.init_name = "mb:17",
-		.platform_data = &integrator_uart_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_UART1_BASE,
-		.end	= INTEGRATOR_UART1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+	INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi0_device = {
-	.dev		= {
-		.init_name = "mb:18",
-	},
-	.res		= {
-		.start	= KMI0_BASE,
-		.end	= KMI0_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+	INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
 
-static struct amba_device kmi1_device = {
-	.dev		= {
-		.init_name = "mb:19",
-	},
-	.res		= {
-		.start	= KMI1_BASE,
-		.end	= KMI1_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&rtc_device,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 8cbb75a96bd4..3e538da6cb1f 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -401,24 +401,21 @@ static int impd1_probe(struct lm_device *dev)
 
 		pc_base = dev->resource.start + idev->offset;
 
-		d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+		d = amba_device_alloc(NULL, pc_base, SZ_4K);
 		if (!d)
 			continue;
 
 		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
-		d->res.start	= dev->resource.start + idev->offset;
-		d->res.end	= d->res.start + SZ_4K - 1;
-		d->res.flags	= IORESOURCE_MEM;
 		d->irq[0]	= dev->irq;
 		d->irq[1]	= dev->irq;
 		d->periphid	= idev->id;
 		d->dev.platform_data = idev->platform_data;
 
-		ret = amba_device_register(d, &dev->resource);
+		ret = amba_device_add(d, &dev->resource);
 		if (ret) {
 			dev_err(&d->dev, "unable to register device: %d\n", ret);
-			kfree(d);
+			amba_device_put(d);
 		}
 	}
 
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
deleted file mode 100644
index 901514eba4a6..000000000000
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-integrator/include/mach/system.h
- *
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6003f3..be9ead4a3bcc 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -347,32 +347,14 @@ static struct mmci_platform_data mmc_data = {
 	.gpio_cd	= -1,
 };
 
-static struct amba_device mmc_device = {
-	.dev		= {
-		.init_name = "mb:1c",
-		.platform_data = &mmc_data,
-	},
-	.res		= {
-		.start	= INTEGRATOR_CP_MMC_BASE,
-		.end	= INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
-	.periphid	= 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS	{ IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS	{ IRQ_CP_AACIINT }
 
-static struct amba_device aaci_device = {
-	.dev		= {
-		.init_name = "mb:1d",
-	},
-	.res		= {
-		.start	= INTEGRATOR_CP_AACI_BASE,
-		.end	= INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { IRQ_CP_AACIINT, NO_IRQ },
-	.periphid	= 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+	INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+	INTEGRATOR_CP_AACI_IRQS, NULL);
 
 
 /*
@@ -425,21 +407,8 @@ static struct clcd_board clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static struct amba_device clcd_device = {
-	.dev		= {
-		.init_name = "mb:c0",
-		.coherent_dma_mask = ~0,
-		.platform_data = &clcd_data,
-	},
-	.res		= {
-		.start	= INTCP_PA_CLCD_BASE,
-		.end	= INTCP_PA_CLCD_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.dma_mask	= ~0,
-	.irq		= { IRQ_CP_CLCDCINT, NO_IRQ },
-	.periphid	= 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+	{ IRQ_CP_CLCDCINT }, &clcd_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&mmc_device,
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
deleted file mode 100644
index 1f31ed3f8ae2..000000000000
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- *  Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
deleted file mode 100644
index 4a88727bca98..000000000000
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
deleted file mode 100644
index 4f98e765397c..000000000000
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
deleted file mode 100644
index a7fb08b2b8e7..000000000000
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 0923bb905cc0..7c1495e4fe7a 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -441,6 +441,9 @@ static struct platform_device *ixp23xx_devices[] __initdata = {
 
 void __init ixp23xx_sys_init(void)
 {
+	/* by default, the idle code is disabled */
+	disable_hlt();
+
 	*IXP23XX_EXP_UNIT_FUSE |= 0xf;
 	platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
 }
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
deleted file mode 100644
index 277dda7334b9..000000000000
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
-	if (!hlt_counter)
-		cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3841ab4146ba..a6329a0a8ec4 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -236,6 +236,12 @@ void __init ixp4xx_init_irq(void)
 {
 	int i = 0;
 
+	/*
+	 * ixp4xx does not implement the XScale PWRMODE register
+	 * so it must not call cpu_do_idle().
+	 */
+	disable_hlt();
+
 	/* Route all sources to IRQ instead of FIQ */
 	*IXP4XX_ICLR = 0x0;
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
deleted file mode 100644
index 140a9bef4466..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
-	/* ixp4xx does not implement the XScale PWRMODE register,
-	 * so it must not call cpu_do_idle() here.
-	 */
-#if 0
-	cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
deleted file mode 100644
index 5fddde002b5e..000000000000
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
deleted file mode 100644
index 59fe992395bf..000000000000
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks,
-	 */
-	cpu_do_idle();
-
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
deleted file mode 100644
index bf176c991520..000000000000
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index bfee5b455105..5d51c102c255 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -149,20 +149,8 @@ static struct clcd_board lpc32xx_clcd_data = {
 	.remove		= lpc32xx_clcd_remove,
 };
 
-static struct amba_device lpc32xx_clcd_device = {
-	.dev				= {
-		.coherent_dma_mask	= ~0,
-		.init_name		= "dev:clcd",
-		.platform_data		= &lpc32xx_clcd_data,
-	},
-	.res				= {
-		.start			= LPC32XX_LCD_BASE,
-		.end			= (LPC32XX_LCD_BASE + SZ_4K - 1),
-		.flags			= IORESOURCE_MEM,
-	},
-	.dma_mask			= ~0,
-	.irq				= {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+	LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
 
 /*
  * AMBA SSP (SPI)
@@ -191,20 +179,8 @@ static struct pl022_ssp_controller lpc32xx_ssp0_data = {
 	.enable_dma		= 0,
 };
 
-static struct amba_device lpc32xx_ssp0_device = {
-	.dev				= {
-		.coherent_dma_mask	= ~0,
-		.init_name		= "dev:ssp0",
-		.platform_data		= &lpc32xx_ssp0_data,
-	},
-	.res				= {
-		.start			= LPC32XX_SSP0_BASE,
-		.end			= (LPC32XX_SSP0_BASE + SZ_4K - 1),
-		.flags			= IORESOURCE_MEM,
-	},
-	.dma_mask			= ~0,
-	.irq				= {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+	LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
 
 /* AT25 driver registration */
 static int __init phy3250_spi_board_register(void)
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
deleted file mode 100644
index 1d001eab81e1..000000000000
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
deleted file mode 100644
index 6a94f0527137..000000000000
--- a/arch/arm/mach-msm/idle.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-msm/include/mach/idle.S
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc. 
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */ 
-		
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(arch_idle)
-#ifdef CONFIG_MSM7X00A_IDLE
-	mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */
-	bic     r0, r1, #(1 << 2)        /* clear dcache bit   */
-	bic     r0, r0, #(1 << 12)       /* clear icache bit   */
-	mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */
-
-	mov     r0, #0                   /* prepare wfi value  */
-	mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */
-	mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */
-	mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */
-
-	mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */
-#endif
-	mov     pc, lr
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
new file mode 100644
index 000000000000..0c9e13c65743
--- /dev/null
+++ b/arch/arm/mach-msm/idle.c
@@ -0,0 +1,49 @@
+/* arch/arm/mach-msm/idle.c
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
+#ifdef CONFIG_MSM7X00A_IDLE
+	asm volatile (
+
+	"mrc     p15, 0, r1, c1, c0, 0    /* read current CR    */ \n\t"
+	"bic     r0, r1, #(1 << 2)        /* clear dcache bit   */ \n\t"
+	"bic     r0, r0, #(1 << 12)       /* clear icache bit   */ \n\t"
+	"mcr     p15, 0, r0, c1, c0, 0    /* disable d/i cache  */ \n\t"
+
+	"mov     r0, #0                   /* prepare wfi value  */ \n\t"
+	"mcr     p15, 0, r0, c7, c10, 0   /* flush the cache    */ \n\t"
+	"mcr     p15, 0, r0, c7, c10, 4   /* memory barrier     */ \n\t"
+	"mcr     p15, 0, r0, c7, c0, 4    /* wait for interrupt */ \n\t"
+
+	"mcr     p15, 0, r1, c1, c0, 0    /* restore d/i cache  */ \n\t"
+
+	: : : "r0","r1" );
+#endif
+}
+
+static int __init msm_idle_init(void)
+{
+	arm_pm_idle = msm_idle;
+	return 0;
+}
+
+arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 311db2b35da0..f5fb2ec87ffe 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,7 +12,6 @@
  * GNU General Public License for more details.
  *
  */
-void arch_idle(void);
 
 /* low level hardware reset hook -- for example, hitting the
  * PSHOLD line on the PMIC to hard reset the system
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
deleted file mode 100644
index 8c3a5387cec7..000000000000
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index fe3e847930c9..01faffec3064 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -77,16 +77,18 @@ err:
 
 int __init mxs_add_amba_device(const struct amba_device *dev)
 {
-	struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+	struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+		dev->res.start, resource_size(&dev->res));
 
 	if (!adev) {
 		pr_err("%s: failed to allocate memory", __func__);
 		return -ENOMEM;
 	}
 
-	*adev = *dev;
+	adev->irq[0] = dev->irq[0];
+	adev->irq[1] = dev->irq[1];
 
-	return amba_device_register(adev, &iomem_resource);
+	return amba_device_add(adev, &iomem_resource);
 }
 
 struct device mxs_apbh_bus = {
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
index a559db09b49c..a5479f766046 100644
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ b/arch/arm/mach-mxs/devices/amba-duart.c
@@ -23,7 +23,7 @@ const struct amba_device name##_device __initconst = {		\
 		.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1,	\
 		.flags = IORESOURCE_MEM,			\
 	},							\
-	.irq = {soc ## _INT_DUART, NO_IRQ},			\
+	.irq = {soc ## _INT_DUART},				\
 }
 
 #ifdef CONFIG_SOC_IMX23
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
deleted file mode 100644
index e7ad1bb29423..000000000000
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index fb042da29bda..a9b4bbcdafb4 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,13 +15,12 @@
 #include <linux/kernel.h>
 #include <linux/suspend.h>
 #include <linux/io.h>
-#include <mach/system.h>
 
 static int mxs_suspend_enter(suspend_state_t state)
 {
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		arch_idle();
+		cpu_do_idle();
 		break;
 
 	default:
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index b9913234bbf6..2cdf6ef69bee 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -92,18 +92,7 @@ void clk_put(struct clk *clk)
 {
 }
 
-static struct amba_device fb_device = {
-	.dev		= {
-		.init_name = "fb",
-		.coherent_dma_mask = ~0,
-	},
-	.res		= {
-		.start	= 0x00104000,
-		.end	= 0x00104fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	.irq		= { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
 
 int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
 {
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
deleted file mode 100644
index b38fa36d58c4..000000000000
--- a/arch/arm/mach-netx/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
-
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 7c878bf00340..f6f74adbe8c4 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -185,20 +185,11 @@ static void __init nhk8815_onenand_init(void)
 #endif
 }
 
-#define __MEM_4K_RESOURCE(x) \
-	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+	{ IRQ_UART0 }, NULL);
 
-static struct amba_device uart0_device = {
-	.dev = { .init_name = "uart0" },
-	__MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
-	.irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
-	.dev = { .init_name = "uart1" },
-	__MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
-	.irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+	{ IRQ_UART1 }, NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 65df7b4fdd3e..27f43a46985e 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -97,12 +97,7 @@ static struct platform_device cpu8815_platform_gpio[] = {
 	GPIO_DEVICE(3),
 };
 
-static struct amba_device cpu8815_amba_rng = {
-	.dev = {
-		.init_name = "rng",
-	},
-	__MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
 
 static struct platform_device *platform_devs[] __initdata = {
 	cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@ static struct platform_device *platform_devs[] __initdata = {
 };
 
 static struct amba_device *amba_devs[] __initdata = {
-	&cpu8815_amba_rng
+	&cpu8815_amba_rng_device
 };
 
 static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
deleted file mode 100644
index 25e198b8976c..000000000000
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- *  mach-nomadik/include/mach/system.h
- *
- *  Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a16dfc..000000000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20ca0ccc..0c2c3669d594 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,9 +42,9 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/atomic.h>
 
 #include <asm/irq.h>
-#include <linux/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
@@ -108,13 +108,7 @@ void omap1_pm_idle(void)
 	__u32 use_idlect1 = arm_idlect1_mask;
 	int do_sleep = 0;
 
-	local_irq_disable();
 	local_fiq_disable();
-	if (need_resched()) {
-		local_fiq_enable();
-		local_irq_enable();
-		return;
-	}
 
 #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@ void omap1_pm_idle(void)
 		omap_writel(saved_idlect1, ARM_IDLECT1);
 
 		local_fiq_enable();
-		local_irq_enable();
 		return;
 	}
 	omap_sram_suspend(omap_readl(ARM_IDLECT1),
 			  omap_readl(ARM_IDLECT2));
 
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 /*
@@ -583,8 +575,6 @@ static void omap_pm_init_proc(void)
 
 #endif /* DEBUG && CONFIG_PROC_FS */
 
-static void (*saved_idle)(void) = NULL;
-
 /*
  *	omap_pm_prepare - Do preliminary suspend work.
  *
@@ -592,8 +582,7 @@ static void (*saved_idle)(void) = NULL;
 static int omap_pm_prepare(void)
 {
 	/* We cannot sleep in idle until we have resumed */
-	saved_idle = pm_idle;
-	pm_idle = NULL;
+	disable_hlt();
 
 	return 0;
 }
@@ -630,7 +619,7 @@ static int omap_pm_enter(suspend_state_t state)
 
 static void omap_pm_finish(void)
 {
-	pm_idle = saved_idle;
+	enable_hlt();
 }
 
 
@@ -687,7 +676,7 @@ static int __init omap_pm_init(void)
 		return -ENODEV;
 	}
 
-	pm_idle = omap1_pm_idle;
+	arm_pm_idle = omap1_pm_idle;
 
 	if (cpu_is_omap7xx())
 		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index 9c442e290ccb..ce91aad4cdad 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -30,29 +30,8 @@ MODULE_AUTHOR("Alexander Shishkin");
 #define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
 #define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
 
-static struct amba_device omap3_etb_device = {
-	.dev		= {
-		.init_name = "etb",
-	},
-	.res		= {
-		.start	= ETB_BASE,
-		.end	= ETB_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.periphid	= 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
-	.dev		= {
-		.init_name = "etm",
-	},
-	.res		= {
-		.start	= ETM_BASE,
-		.end	= ETM_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	.periphid	= 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
 
 static int __init emu_init(void)
 {
@@ -66,4 +45,3 @@ static int __init emu_init(void)
 }
 
 subsys_initcall(emu_init);
-
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
deleted file mode 100644
index d488721ab90b..000000000000
--- a/arch/arm/mach-omap2/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index b8822f8b2891..1f736222a629 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -232,7 +232,6 @@ static int omap2_can_sleep(void)
 
 static void omap2_pm_idle(void)
 {
-	local_irq_disable();
 	local_fiq_disable();
 
 	if (!omap2_can_sleep()) {
@@ -249,7 +248,6 @@ static void omap2_pm_idle(void)
 
 out:
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -468,7 +466,7 @@ static int __init omap2_pm_init(void)
 	}
 
 	suspend_set_ops(&omap_pm_ops);
-	pm_idle = omap2_pm_idle;
+	arm_pm_idle = omap2_pm_idle;
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc6987578920..b77df735fa6c 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -418,10 +418,9 @@ void omap_sram_idle(void)
 
 static void omap3_pm_idle(void)
 {
-	local_irq_disable();
 	local_fiq_disable();
 
-	if (omap_irq_pending() || need_resched())
+	if (omap_irq_pending())
 		goto out;
 
 	trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@ static void omap3_pm_idle(void)
 
 out:
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 #ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@ static int __init omap3_pm_init(void)
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
-	pm_idle = omap3_pm_idle;
+	arm_pm_idle = omap3_pm_idle;
 	omap3_idle_init();
 
 	/*
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c264ef7219c1..c840689df24a 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -173,18 +173,16 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  * omap_default_idle - OMAP4 default ilde routine.'
  *
  * Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
  * by secondary CPU with CONFIG_CPUIDLE.
  */
 static void omap_default_idle(void)
 {
-	local_irq_disable();
 	local_fiq_disable();
 
 	omap_do_wfi();
 
 	local_fiq_enable();
-	local_irq_enable();
 }
 
 /**
@@ -255,8 +253,8 @@ static int __init omap4_pm_init(void)
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
-	/* Overwrite the default arch_idle() */
-	pm_idle = omap_default_idle;
+	/* Overwrite the default cpu_do_idle() */
+	arm_pm_idle = omap_default_idle;
 
 	omap4_idle_init();
 
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118ab43e2..873b51d494ea 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 
-#include <mach/system.h>
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
deleted file mode 100644
index 825a2650cefa..000000000000
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
deleted file mode 100644
index 1a5d8cb57df4..000000000000
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching and wait for interrupt
-	 * tricks.
-	 */
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
deleted file mode 100644
index 60cfe7188091..000000000000
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
deleted file mode 100644
index 2c7d2a9d0c92..000000000000
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
deleted file mode 100644
index c5afacd3cc0b..000000000000
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author:	Nicolas Pitre
- * Created:	Jun 15, 2001
- * Copyright:	MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 735b57aaf2d6..f8f2c0ac4c01 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -28,21 +28,11 @@
 #include <asm/setup.h>
 #include <asm/leds.h>
 
-#define AMBA_DEVICE(name,busid,base,plat)			\
-static struct amba_device name##_device = {			\
-	.dev		= {					\
-		.coherent_dma_mask = ~0,			\
-		.init_name = busid,				\
-		.platform_data = plat,				\
-	},							\
-	.res		= {					\
-		.start	= REALVIEW_##base##_BASE,		\
-		.end	= (REALVIEW_##base##_BASE) + SZ_4K - 1,	\
-		.flags	= IORESOURCE_MEM,			\
-	},							\
-	.dma_mask	= ~0,					\
-	.irq		= base##_IRQ,				\
-}
+#define APB_DEVICE(name, busid, base, plat)			\
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat)			\
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
 
 struct machine_desc;
 
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 5c3c625e3e04..708f84156f2c 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
 #define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
 #define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
 #define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_GPIO0	(IRQ_DC1176_GIC_START + 16)
 #define IRQ_DC1176_SSP		(IRQ_DC1176_GIC_START + 17)	/* SSP port */
 #define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
 #define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
@@ -73,7 +74,6 @@
 #define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
 #define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
 
-#define IRQ_PB1176_GPIO0	-1
 #define IRQ_PB1176_SCTL		-1
 
 #define NR_GIC_PB1176		2
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
deleted file mode 100644
index 471b671159ce..000000000000
--- a/arch/arm/mach-realview/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-realview/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9578145f2df0..157e1bc6e83c 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -135,63 +135,63 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 /*
  * These devices are connected via the core APB bridge
  */
-#define GPIO2_IRQ	{ IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ	{ IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ	{ IRQ_EB_GPIO2 }
+#define GPIO3_IRQ	{ IRQ_EB_GPIO3 }
 
-#define AACI_IRQ	{ IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ	{ IRQ_EB_AACI }
 #define MMCI0_IRQ	{ IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ	{ IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ	{ IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ	{ IRQ_EB_KMI0 }
+#define KMI1_IRQ	{ IRQ_EB_KMI1 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define EB_SMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ	{ IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ	{ IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ	{ }
+#define MPMC_IRQ	{ }
+#define EB_CLCD_IRQ	{ IRQ_EB_CLCD }
+#define DMAC_IRQ	{ IRQ_EB_DMA }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ	{ IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ	{ IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ	{ }
+#define EB_WATCHDOG_IRQ	{ IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ	{ IRQ_EB_GPIO0 }
+#define GPIO1_IRQ	{ IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ	{ IRQ_EB_RTC }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
-#define SCI_IRQ		{ IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ	{ IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ	{ IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ	{ IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ	{ IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ	{ IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ		{ IRQ_EB_SCI }
+#define EB_UART0_IRQ	{ IRQ_EB_UART0 }
+#define EB_UART1_IRQ	{ IRQ_EB_UART1 }
+#define EB_UART2_IRQ	{ IRQ_EB_UART2 }
+#define EB_UART3_IRQ	{ IRQ_EB_UART3 }
+#define EB_SSP_IRQ	{ IRQ_EB_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+APB_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+APB_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+APB_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
+AHB_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AHB_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AHB_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AHB_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+APB_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+APB_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+APB_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e4abe94fb11a..b1d7cafa1a6d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -132,50 +132,50 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 /*
  * RealView PB1176 AMBA devices
  */
-#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ	{ IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ	{ IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ	{ IRQ_PB1176_GPIO3 }
+#define AACI_IRQ	{ IRQ_PB1176_AACI }
 #define MMCI0_IRQ	{ IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ	{ IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ	{ IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ	{ IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ		{ IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ	{ IRQ_PB1176_KMI0 }
+#define KMI1_IRQ	{ IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ	{ }
+#define MPMC_IRQ	{ }
+#define PB1176_CLCD_IRQ	{ IRQ_DC1176_CLCD }
+#define SCTL_IRQ	{ }
+#define PB1176_WATCHDOG_IRQ	{ IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ	{ IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ	{ IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ	{ IRQ_DC1176_RTC }
+#define SCI_IRQ		{ IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ	{ IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ	{ IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ	{ IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ	{ IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ	{ IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ		{ IRQ_DC1176_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart4,	"fpga:uart4",	PB1176_UART4,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
-AMBA_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
-AMBA_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
+AHB_DEVICE(smc,		"dev:smc",	PB1176_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PB1176_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+APB_DEVICE(uart3,	"dev:uart3",	PB1176_UART3,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	&ssp0_plat_data);
+AHB_DEVICE(clcd,	"dev:clcd",	PB1176_CLCD,	&clcd_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart0_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 2147335f66f5..ae7fe54f6eb6 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -127,52 +127,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PB11MPCore AMBA devices
  */
 
-#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ		{ IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ		{ IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ		{ IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ		{ IRQ_TC11MP_AACI }
 #define MMCI0_IRQ		{ IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ		{ IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ		{ IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ		{ IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ			{ IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ		{ IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ		{ IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ		{ }
+#define MPMC_IRQ		{ }
+#define PB11MP_CLCD_IRQ		{ IRQ_PB11MP_CLCD }
+#define DMAC_IRQ		{ IRQ_PB11MP_DMAC }
+#define SCTL_IRQ		{ }
+#define PB11MP_WATCHDOG_IRQ	{ IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ	{ IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ		{ IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ		{ IRQ_TC11MP_RTC }
+#define SCI_IRQ			{ IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ	{ IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ	{ IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ	{ IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ	{ IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ		{ IRQ_PB11MP_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PB11MP_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PB11MP_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
+AHB_DEVICE(smc,		"dev:smc",	PB11MP_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PB11MP_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
+AHB_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
+AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 25b2e59296f8..59650174e6ed 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -122,52 +122,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PBA8Core AMBA devices
  */
 
-#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ		{ IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ		{ IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ		{ IRQ_PBA8_GPIO3 }
+#define AACI_IRQ		{ IRQ_PBA8_AACI }
 #define MMCI0_IRQ		{ IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ		{ IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ		{ IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ			{ IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ		{ IRQ_PBA8_KMI0 }
+#define KMI1_IRQ		{ IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ		{ }
+#define MPMC_IRQ		{ }
+#define PBA8_CLCD_IRQ		{ IRQ_PBA8_CLCD }
+#define DMAC_IRQ		{ IRQ_PBA8_DMAC }
+#define SCTL_IRQ		{ }
+#define PBA8_WATCHDOG_IRQ	{ IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ		{ IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ		{ IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ		{ IRQ_PBA8_RTC }
+#define SCI_IRQ			{ IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ		{ IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ		{ IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ		{ IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ		{ IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ		{ IRQ_PBA8_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PBA8_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PBA8_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
+AHB_DEVICE(smc,		"dev:smc",	PBA8_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PBA8_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
+AHB_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
+AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ac715645b860..1cd9956f5875 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -144,52 +144,52 @@ static struct pl022_ssp_controller ssp0_plat_data = {
  * RealView PBXCore AMBA devices
  */
 
-#define GPIO2_IRQ		{ IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ		{ IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ		{ IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ		{ IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ		{ IRQ_PBX_GPIO3 }
+#define AACI_IRQ		{ IRQ_PBX_AACI }
 #define MMCI0_IRQ		{ IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ		{ IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ		{ IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ		{ IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ		{ NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ		{ IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ		{ IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ			{ IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ		{ IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ		{ IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ		{ IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ		{ IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ		{ IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ		{ IRQ_PBX_KMI0 }
+#define KMI1_IRQ		{ IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ		{ }
+#define MPMC_IRQ		{ }
+#define PBX_CLCD_IRQ		{ IRQ_PBX_CLCD }
+#define DMAC_IRQ		{ IRQ_PBX_DMAC }
+#define SCTL_IRQ		{ }
+#define PBX_WATCHDOG_IRQ	{ IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ		{ IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ		{ IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ		{ IRQ_PBX_RTC }
+#define SCI_IRQ			{ IRQ_PBX_SCI }
+#define PBX_UART0_IRQ		{ IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ		{ IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ		{ IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ		{ IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ		{ IRQ_PBX_SSP }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
+APB_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+APB_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+APB_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+APB_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+APB_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:rtc",	PBX_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
+AHB_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
+AHB_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+APB_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
+APB_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
+APB_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+APB_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+APB_DEVICE(rtc,		"dev:rtc",	PBX_RTC,	NULL);
+APB_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+APB_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
+APB_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
+APB_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
+APB_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	&ssp0_plat_data);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
+AHB_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
+AHB_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
deleted file mode 100644
index 359bab94b6af..000000000000
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- *  arch/arm/mach-rpc/include/mach/system.h
- *
- *  Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
deleted file mode 100644
index 5e215c1a5c8f..000000000000
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
-	unsigned long tmp;
-	int i;
-
-	/* idle the system by using the idle mode which will wait for an
-	 * interrupt to happen before restarting the system.
-	 */
-
-	/* Warning: going into idle state upsets jtag scanning */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-
-	/* the samsung port seems to do a loop and then unset idle.. */
-	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
-	}
-
-	/* this bit is not cleared on re-start... */
-
-	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
-		     S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
-	if (s3c24xx_idle != NULL)
-		(s3c24xx_idle)();
-	else
-		s3c24xx_default_idle();
-}
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aff6e85a97c6..c6eac9871093 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,8 +32,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/idle.h>
-
 #include <plat/cpu-freq.h>
 
 #include <mach/regs-clock.h>
@@ -164,7 +162,7 @@ void __init s3c2412_map_io(void)
 
 	/* set our idle function */
 
-	s3c24xx_idle = s3c2412_idle;
+	arm_pm_idle = s3c2412_idle;
 
 	/* register our io-tables */
 
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 5287d2808d3e..08bb0355159d 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 
-#include <mach/idle.h>
 #include <mach/regs-s3c2443-clock.h>
 
 #include <plat/gpio-core.h>
@@ -88,8 +87,6 @@ int __init s3c2416_init(void)
 {
 	printk(KERN_INFO "S3C2416: Initializing architecture\n");
 
-	/* s3c24xx_idle = s3c2416_idle;	*/
-
 	/* change WDT IRQ number */
 	s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
 	s3c_device_wdt.resource[1].end   = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
deleted file mode 100644
index 353ed4389ae7..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 52b89a376447..9143f8b19962 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -146,15 +146,12 @@ static void s5p64x0_idle(void)
 {
 	unsigned long val;
 
-	if (!need_resched()) {
-		val = __raw_readl(S5P64X0_PWR_CFG);
-		val &= ~(0x3 << 5);
-		val |= (0x1 << 5);
-		__raw_writel(val, S5P64X0_PWR_CFG);
+	val = __raw_readl(S5P64X0_PWR_CFG);
+	val &= ~(0x3 << 5);
+	val |= (0x1 << 5);
+	__raw_writel(val, S5P64X0_PWR_CFG);
 
-		cpu_do_idle();
-	}
-	local_irq_enable();
+	cpu_do_idle();
 }
 
 /*
@@ -286,7 +283,7 @@ int __init s5p64x0_init(void)
 	printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
 
 	/* set idle function */
-	pm_idle = s5p64x0_idle;
+	arm_pm_idle = s5p64x0_idle;
 
 	return device_register(&s5p64x0_dev);
 }
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index f820c0744405..f7f68ad77910 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -108,34 +108,22 @@ struct dma_pl330_platdata s5p6450_pdma_pdata = {
 	.peri_id = s5p6450_pdma_peri,
 };
 
-struct amba_device s5p64x0_device_pdma = {
-	.dev = {
-		.init_name = "dma-pl330",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.res = {
-		.start = S5P64X0_PA_PDMA,
-		.end = S5P64X0_PA_PDMA + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_DMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330, S5P64X0_PA_PDMA,
+	{IRQ_DMA0}, NULL);
 
 static int __init s5p64x0_dma_init(void)
 {
 	if (soc_is_s5p6450()) {
 		dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
 		dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
-		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+		s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
 	} else {
 		dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
 		dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
-		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+		s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
 	}
 
-	amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+	amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
deleted file mode 100644
index cf26e0954a2f..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c9095730a7f5..ff71e2d467c6 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -129,14 +129,6 @@ static struct map_desc s5pc100_iodesc[] __initdata = {
 	}
 };
 
-static void s5pc100_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 /*
  * s5pc100_map_io
  *
@@ -210,10 +202,6 @@ core_initcall(s5pc100_core_init);
 int __init s5pc100_init(void)
 {
 	printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5pc100_idle;
-
 	return device_register(&s5pc100_dev);
 }
 
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index c841f4d313f2..96b1ab3dcd48 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -73,21 +73,8 @@ struct dma_pl330_platdata s5pc100_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device s5pc100_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_pdma0_pdata,
-	},
-	.res = {
-		.start = S5PC100_PA_PDMA0,
-		.end = S5PC100_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma0,  "dma-pl330.0", 0x00041330, S5PC100_PA_PDMA0,
+	{IRQ_PDMA0}, &s5pc100_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_UART0_RX,
@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pc100_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device s5pc100_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pc100_pdma1_pdata,
-	},
-	.res = {
-		.start = S5PC100_PA_PDMA1,
-		.end = S5PC100_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, S5PC100_PA_PDMA1,
+	{IRQ_PDMA1}, &s5pc100_pdma1_pdata);
 
 static int __init s5pc100_dma_init(void)
 {
 	dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+	amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
deleted file mode 100644
index afc96c298518..000000000000
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- *      Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9c1bcdcc12c3..4c9e9027df9a 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -142,14 +142,6 @@ static struct map_desc s5pv210_iodesc[] __initdata = {
 	}
 };
 
-static void s5pv210_idle(void)
-{
-	if (!need_resched())
-		cpu_do_idle();
-
-	local_irq_enable();
-}
-
 void s5pv210_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@ core_initcall(s5pv210_core_init);
 int __init s5pv210_init(void)
 {
 	printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
-	/* set idle function */
-	pm_idle = s5pv210_idle;
-
 	return device_register(&s5pv210_dev);
 }
 
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index a6113e0267f2..f6885d247d14 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -71,21 +71,8 @@ struct dma_pl330_platdata s5pv210_pdma0_pdata = {
 	.peri_id = pdma0_peri,
 };
 
-struct amba_device s5pv210_device_pdma0 = {
-	.dev = {
-		.init_name = "dma-pl330.0",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pv210_pdma0_pdata,
-	},
-	.res = {
-		.start = S5PV210_PA_PDMA0,
-		.end = S5PV210_PA_PDMA0 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA0, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330, S5PV210_PA_PDMA0,
+	{IRQ_PDMA0}, &s5pv210_pdma0_pdata);
 
 u8 pdma1_peri[] = {
 	DMACH_UART0_RX,
@@ -127,31 +114,18 @@ struct dma_pl330_platdata s5pv210_pdma1_pdata = {
 	.peri_id = pdma1_peri,
 };
 
-struct amba_device s5pv210_device_pdma1 = {
-	.dev = {
-		.init_name = "dma-pl330.1",
-		.dma_mask = &dma_dmamask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.platform_data = &s5pv210_pdma1_pdata,
-	},
-	.res = {
-		.start = S5PV210_PA_PDMA1,
-		.end = S5PV210_PA_PDMA1 + SZ_4K,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_PDMA1, NO_IRQ},
-	.periphid = 0x00041330,
-};
+AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330, S5PV210_PA_PDMA1,
+	{IRQ_PDMA1}, &s5pv210_pdma1_pdata);
 
 static int __init s5pv210_dma_init(void)
 {
 	dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
-	amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+	amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
 
 	dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
 	dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
-	amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+	amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
 
 	return 0;
 }
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
deleted file mode 100644
index bf288ced860a..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
-	/* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
deleted file mode 100644
index e17b208f76d4..000000000000
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a851c254ad6c..6a2a7f2c2557 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -149,10 +149,16 @@ static struct sys_timer shark_timer = {
 	.init		= shark_timer_init,
 };
 
+static void shark_init_early(void)
+{
+	disable_hlt();
+}
+
 MACHINE_START(SHARK, "Shark")
 	/* Maintainer: Alexander Schulz */
 	.atag_offset	= 0x3000,
 	.map_io		= shark_map_io,
+	.init_early	= shark_init_early,
 	.init_irq	= shark_init_irq,
 	.timer		= &shark_timer,
 	.dma_zone_size	= SZ_4M,
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
deleted file mode 100644
index 1b2f2c5050a8..000000000000
--- a/arch/arm/mach-shark/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 956ac18ddbf9..3bbcb3fa0775 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -1,11 +1,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	soft_restart(0);
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
deleted file mode 100644
index 92cee6335c90..000000000000
--- a/arch/arm/mach-spear3xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4ade20..9da50e281e98 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -430,18 +430,8 @@ static struct pl061_platform_data gpio1_plat_data = {
 	.irq_base	= SPEAR300_GPIO1_INT_BASE,
 };
 
-struct amba_device spear300_gpio1_device = {
-	.dev = {
-		.init_name = "gpio1",
-		.platform_data = &gpio1_plat_data,
-	},
-	.res = {
-		.start = SPEAR300_GPIO_BASE,
-		.end = SPEAR300_GPIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+	{SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
 
 /* spear300 routines */
 void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 10af45da86a0..b1733c37f209 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -28,31 +28,12 @@ static struct pl061_platform_data gpio_plat_data = {
 	.irq_base	= SPEAR3XX_GPIO_INT_BASE,
 };
 
-struct amba_device spear3xx_gpio_device = {
-	.dev = {
-		.init_name = "gpio",
-		.platform_data = &gpio_plat_data,
-	},
-	.res = {
-		.start = SPEAR3XX_ICM3_GPIO_BASE,
-		.end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+	{SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
 
 /* uart device registration */
-struct amba_device spear3xx_uart_device = {
-	.dev = {
-		.init_name = "uart",
-	},
-	.res = {
-		.start = SPEAR3XX_ICM1_UART_BASE,
-		.end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+	{SPEAR3XX_IRQ_UART}, NULL);
 
 /* Do spear3xx familiy common initialization part here */
 void __init spear3xx_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
deleted file mode 100644
index 0b1d2be81cfb..000000000000
--- a/arch/arm/mach-spear6xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif	/* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628c8b2c..b997b1b10ba0 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -34,7 +34,7 @@ struct amba_device uart_device[] = {
 			.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_UART_0, NO_IRQ},
+		.irq = {IRQ_UART_0},
 	}, {
 		.dev = {
 			.init_name = "uart1",
@@ -44,7 +44,7 @@ struct amba_device uart_device[] = {
 			.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_UART_1, NO_IRQ},
+		.irq = {IRQ_UART_1},
 	}
 };
 
@@ -73,7 +73,7 @@ struct amba_device gpio_device[] = {
 			.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+		.irq = {IRQ_LOCAL_GPIO},
 	}, {
 		.dev = {
 			.init_name = "gpio1",
@@ -84,7 +84,7 @@ struct amba_device gpio_device[] = {
 			.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_BASIC_GPIO, NO_IRQ},
+		.irq = {IRQ_BASIC_GPIO},
 	}, {
 		.dev = {
 			.init_name = "gpio2",
@@ -95,7 +95,7 @@ struct amba_device gpio_device[] = {
 			.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
 			.flags = IORESOURCE_MEM,
 		},
-		.irq = {IRQ_APPL_GPIO, NO_IRQ},
+		.irq = {IRQ_APPL_GPIO},
 	}
 };
 
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index a2eb90169aed..2db20da1d585 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -27,7 +27,6 @@
 #include <asm/hardware/gic.h>
 
 #include <mach/iomap.h>
-#include <mach/system.h>
 
 #include "board.h"
 #include "clock.h"
@@ -96,6 +95,8 @@ static void __init tegra_init_cache(u32 tag_latency, u32 data_latency)
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void __init tegra20_init_early(void)
 {
+	disable_hlt();  /* idle WFI usage needs to be confirmed */
+
 	tegra_init_fuse();
 	tegra2_init_clocks();
 	tegra_clk_init_from_table(tegra20_clk_init_table);
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
deleted file mode 100644
index a312988bf6f8..000000000000
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Colin Cross <ccross@google.com>
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b4c6926a700c..b9865605da09 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -94,19 +94,9 @@ static struct amba_pl011_data uart0_plat_data = {
 #endif
 };
 
-static struct amba_device uart0_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "uart0", /* Slow device at 0x3000 offset */
-		.platform_data = &uart0_plat_data,
-	},
-	.res = {
-		.start = U300_UART0_BASE,
-		.end   = U300_UART0_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+	{ IRQ_U300_UART0 }, &uart0_plat_data);
 
 /* The U335 have an additional UART1 on the APP CPU */
 #ifdef CONFIG_MACH_U300_BS335
@@ -118,71 +108,28 @@ static struct amba_pl011_data uart1_plat_data = {
 #endif
 };
 
-static struct amba_device uart1_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "uart1", /* Fast device at 0x7000 offset */
-		.platform_data = &uart1_plat_data,
-	},
-	.res = {
-		.start = U300_UART1_BASE,
-		.end   = U300_UART1_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+	{ IRQ_U300_UART1 }, &uart1_plat_data);
 #endif
 
-static struct amba_device pl172_device = {
-	.dev = {
-		.init_name = "pl172", /* AHB device at 0x4000 offset */
-		.platform_data = NULL,
-	},
-	.res = {
-		.start = U300_EMIF_CFG_BASE,
-		.end   = U300_EMIF_CFG_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
 
 
 /*
  * Everything within this next ifdef deals with external devices connected to
  * the APP SPI bus.
  */
-static struct amba_device pl022_device = {
-	.dev = {
-		.coherent_dma_mask = ~0,
-		.init_name = "pl022", /* Fast device at 0x6000 offset */
-	},
-	.res = {
-		.start = U300_SPI_BASE,
-		.end   = U300_SPI_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_U300_SPI, NO_IRQ },
-	/*
-	 * This device has a DMA channel but the Linux driver does not use
-	 * it currently.
-	 */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+	{ IRQ_U300_SPI }, NULL);
 
-static struct amba_device mmcsd_device = {
-	.dev = {
-		.init_name = "mmci", /* Fast device at 0x1000 offset */
-		.platform_data = NULL, /* Added later */
-	},
-	.res = {
-		.start = U300_MMCSD_BASE,
-		.end   = U300_MMCSD_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	.irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
-	/*
-	 * This device has a DMA channel but the Linux driver does not use
-	 * it currently.
-	 */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS	{ IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+	U300_MMCSD_IRQS, NULL);
 
 /*
  * The order of device declaration may be important, since some devices
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 574d46e38290..000000000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e5418d80..898a64517b09 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -26,29 +26,22 @@ dbx500_add_amba_device(const char *name, resource_size_t base,
 	struct amba_device *dev;
 	int ret;
 
-	dev = kzalloc(sizeof *dev, GFP_KERNEL);
+	dev = amba_device_alloc(name, base, SZ_4K);
 	if (!dev)
 		return ERR_PTR(-ENOMEM);
 
-	dev->dev.init_name = name;
-
-	dev->res.start = base;
-	dev->res.end = base + SZ_4K - 1;
-	dev->res.flags = IORESOURCE_MEM;
-
 	dev->dma_mask = DMA_BIT_MASK(32);
 	dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
 
 	dev->irq[0] = irq;
-	dev->irq[1] = NO_IRQ;
 
 	dev->periphid = periphid;
 
 	dev->dev.platform_data = pdata;
 
-	ret = amba_device_register(dev, &iomem_resource);
+	ret = amba_device_add(dev, &iomem_resource);
 	if (ret) {
-		kfree(dev);
+		amba_device_put(dev);
 		return ERR_PTR(ret);
 	}
 
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
deleted file mode 100644
index 258e5c919c24..000000000000
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 02b7b9303f3b..4f352e45be0a 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -582,58 +582,58 @@ static struct pl022_ssp_controller ssp0_plat_data = {
 	.num_chipselect = 1,
 };
 
-#define AACI_IRQ	{ IRQ_AACI, NO_IRQ }
+#define AACI_IRQ	{ IRQ_AACI }
 #define MMCI0_IRQ	{ IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ	{ IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ	{ IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ	{ IRQ_SIC_KMI0 }
+#define KMI1_IRQ	{ IRQ_SIC_KMI1 }
 
 /*
  * These devices are connected directly to the multi-layer AHB switch
  */
-#define SMC_IRQ		{ NO_IRQ, NO_IRQ }
-#define MPMC_IRQ	{ NO_IRQ, NO_IRQ }
-#define CLCD_IRQ	{ IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ	{ IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ		{ }
+#define MPMC_IRQ	{ }
+#define CLCD_IRQ	{ IRQ_CLCDINT }
+#define DMAC_IRQ	{ IRQ_DMAINT }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define SCTL_IRQ	{ NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ	{ IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ	{ IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ	{ IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ		{ IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ	{ }
+#define WATCHDOG_IRQ	{ IRQ_WDOGINT }
+#define GPIO0_IRQ	{ IRQ_GPIOINT0 }
+#define GPIO1_IRQ	{ IRQ_GPIOINT1 }
+#define RTC_IRQ		{ IRQ_RTCINT }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
-#define SCI_IRQ		{ IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ	{ IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ	{ IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ	{ IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ		{ IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ		{ IRQ_SCIINT }
+#define UART0_IRQ	{ IRQ_UARTINT0 }
+#define UART1_IRQ	{ IRQ_UARTINT1 }
+#define UART2_IRQ	{ IRQ_UARTINT2 }
+#define SSP_IRQ		{ IRQ_SSPINT }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
+APB_DEVICE(aaci,  "fpga:04", AACI,     NULL);
+APB_DEVICE(mmc0,  "fpga:05", MMCI0,    &mmc0_plat_data);
+APB_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
+APB_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  SMC,      NULL);
-AMBA_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
-AMBA_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  UART0,    NULL);
-AMBA_DEVICE(uart1, "dev:f2",  UART1,    NULL);
-AMBA_DEVICE(uart2, "dev:f3",  UART2,    NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
+AHB_DEVICE(smc,   "dev:00",  SMC,      NULL);
+AHB_DEVICE(mpmc,  "dev:10",  MPMC,     NULL);
+AHB_DEVICE(clcd,  "dev:20",  CLCD,     &clcd_plat_data);
+AHB_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
+APB_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
+APB_DEVICE(wdog,  "dev:e1",  WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4",  GPIO0,    &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
+APB_DEVICE(rtc,   "dev:e8",  RTC,      NULL);
+APB_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
+APB_DEVICE(uart0, "dev:f1",  UART0,    NULL);
+APB_DEVICE(uart1, "dev:f2",  UART1,    NULL);
+APB_DEVICE(uart2, "dev:f3",  UART2,    NULL);
+APB_DEVICE(ssp0,  "dev:f4",  SSP,      &ssp0_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 2ef2f555f315..683e60776a85 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -36,20 +36,10 @@ extern unsigned int mmc_status(struct device *dev);
 extern struct of_dev_auxdata versatile_auxdata_lookup[];
 #endif
 
-#define AMBA_DEVICE(name,busid,base,plat)			\
-static struct amba_device name##_device = {			\
-	.dev		= {					\
-		.coherent_dma_mask = ~0,			\
-		.init_name = busid,				\
-		.platform_data = plat,				\
-	},							\
-	.res		= {					\
-		.start	= VERSATILE_##base##_BASE,		\
-		.end	= (VERSATILE_##base##_BASE) + SZ_4K - 1,\
-		.flags	= IORESOURCE_MEM,			\
-	},							\
-	.dma_mask	= ~0,					\
-	.irq		= base##_IRQ,				\
-}
+#define APB_DEVICE(name, busid, base, plat)	\
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat)	\
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
 
 #endif
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
deleted file mode 100644
index f3fa347895f0..000000000000
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-versatile/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9581c197500c..19738331bd3d 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -58,28 +58,28 @@ static struct pl061_platform_data gpio3_plat_data = {
 	.irq_base	= IRQ_GPIO3_START,
 };
 
-#define UART3_IRQ	{ IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ	{ IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ	{ IRQ_SIC_UART3 }
+#define SCI1_IRQ	{ IRQ_SIC_SCI3 }
 #define MMCI1_IRQ	{ IRQ_MMCI1A, IRQ_SIC_MMCI1B }
 
 /*
  * These devices are connected via the core APB bridge
  */
-#define GPIO2_IRQ	{ IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ	{ IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ	{ IRQ_GPIOINT2 }
+#define GPIO3_IRQ	{ IRQ_GPIOINT3 }
 
 /*
  * These devices are connected via the DMA APB bridge
  */
 
 /* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3,    NULL);
-AMBA_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
-AMBA_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3,    NULL);
+APB_DEVICE(sci1,  "fpga:0a", SCI1,     NULL);
+APB_DEVICE(mmc1,  "fpga:0b", MMCI1,    &mmc1_plat_data);
 
 /* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7",  GPIO3,    &gpio3_plat_data);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&uart3_device,
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index f4397159c173..9f0f2827c711 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,19 +1,2 @@
 #define __MMIO_P2V(x)	(((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
 #define MMIO_P2V(x)	((void __iomem *)__MMIO_P2V(x))
-
-#define AMBA_DEVICE(name,busid,base,plat)	\
-struct amba_device name##_device = {		\
-	.dev		= {			\
-		.coherent_dma_mask = ~0UL,	\
-		.init_name = busid,		\
-		.platform_data = plat,		\
-	},					\
-	.res		= {			\
-		.start	= base,			\
-		.end	= base + SZ_4K - 1,	\
-		.flags	= IORESOURCE_MEM,	\
-	},					\
-	.dma_mask	= ~0UL,			\
-	.irq		= IRQ_##base,		\
-	/* .dma		= DMA_##base,*/		\
-}
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index b1e87c184e54..1b1d2e4892b9 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -109,10 +109,10 @@ static struct clcd_board ct_ca9x4_clcd_data = {
 	.remove		= versatile_clcd_remove_dma,
 };
 
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
 
 static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
 	&clcd_device,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index a34d3d4faae1..a40468f3b938 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -35,7 +35,7 @@
  * Interrupts.  Those in {} are for AMBA devices
  */
 #define IRQ_CT_CA9X4_CLCDC	{ 76 }
-#define IRQ_CT_CA9X4_DMC	{ -1 }
+#define IRQ_CT_CA9X4_DMC	{ 0 }
 #define IRQ_CT_CA9X4_SMC	{ 77, 78 }
 #define IRQ_CT_CA9X4_TIMER0	80
 #define IRQ_CT_CA9X4_TIMER1	81
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
deleted file mode 100644
index f653a8e265bd..000000000000
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *  arch/arm/mach-vexpress/include/mach/system.h
- *
- *  Copyright (C) 2003 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b4a28ca0e50a..ad64f97a2003 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -266,16 +266,16 @@ static struct mmci_platform_data v2m_mmci_data = {
 	.status		= v2m_mmci_status,
 };
 
-static AMBA_DEVICE(aaci,  "mb:aaci",  V2M_AACI, NULL);
-static AMBA_DEVICE(mmci,  "mb:mmci",  V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0,  "mb:kmi0",  V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1,  "mb:kmi1",  V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt,   "mb:wdt",   V2M_WDT, NULL);
-static AMBA_DEVICE(rtc,   "mb:rtc",   V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci,  "mb:aaci",  0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci,  "mb:mmci",  0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0,  "mb:kmi0",  0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1,  "mb:kmi1",  0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt,   "mb:wdt",   0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc,   "mb:rtc",   0, V2M_RTC, IRQ_V2M_RTC, NULL);
 
 static struct amba_device *v2m_amba_devs[] __initdata = {
 	&aaci_device,
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
index d6c757eaf26b..58fa8010ee61 100644
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -7,11 +7,6 @@
 /* PM Software Reset request register */
 #define VT8500_PMSR_VIRT	0xf8130060
 
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
 static inline void arch_reset(char mode, const char *cmd)
 {
 	writel(1, VT8500_PMSR_VIRT);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 78110befb7a9..db82568a998a 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -530,6 +530,7 @@ static struct platform_device *nuc900_public_dev[] __initdata = {
 
 void __init nuc900_board_init(struct platform_device **device, int size)
 {
+	disable_hlt();
 	platform_add_devices(device, size);
 	platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
 	spi_register_board_info(nuc900_spi_board_info,
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
deleted file mode 100644
index 2aaeb9311619..000000000000
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
deleted file mode 100644
index 8e88e0b8d2ba..000000000000
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/system.h
- *
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
deleted file mode 100644
index 13ad0df2e860..000000000000
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- *  Copyright (C) 1999 ARM Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd74b129..000000000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
-	cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda8b661..32a09931350c 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/regs-clock.h>
 #include <asm/irq.h>
 #include <asm/cacheflush.h>
 
@@ -190,8 +191,34 @@ static unsigned long s3c24xx_read_idcode_v4(void)
 	return __raw_readl(S3C2410_GSTATUS1);
 }
 
+static void s3c24xx_default_idle(void)
+{
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++)
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
+	arm_pm_idle = s3c24xx_default_idle;
+
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
deleted file mode 100644
index 86c6f83b44cc..000000000000
--- a/arch/arm/plat-spear/include/plat/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-	/*
-	 * This should do all the clock switching
-	 * and wait for interrupt tricks
-	 */
-	cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */