Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are are a couple of last-minute fixes for 4.16, mostly for
  regressions. As usual, the majory are device tree changes:

   - USB 3 support on rk3399 didn't work and is being reverted for now

   - One fix for an old suspend/resume bug on rk3399

   - A few regulator related fixes on Banana Pi M2, and on imx7d-sdb

   - A boot regression fix for all Aspeed SoCs failing to find their
     memory

   - One more dtc warning fix

  The other changes are:

   - A few updates to the MAINTAINERS file

   - A revert for an incorrect orion5x cleanup

   - Two power management fixes for OMAP"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP: Fix SRAM W+X mapping
  ARM: dts: aspeed: Add default memory node
  mailmap: Update email address for Gregory CLEMENT
  ARM: davinci: fix the GPIO lookup for omapl138-hawk
  MAINTAINERS: Update Tegra IOMMU maintainer
  ARM: dts: imx7d-sdb: Fix regulator-usb-otg2-vbus node name
  ARM: ux500: Fix PMU IRQ regression
  ARM: dts: rockchip: Add missing #sound-dai-cells on rk3288
  Revert "arm64: dts: rockchip: add usb3-phy otg-port support for rk3399"
  arm64: dts: rockchip: Fix rk3399-gru-* s2r (pinctrl hogs, wifi reset)
  ARM: OMAP: Fix dmtimer init for omap1
  MAINTAINERS: update email address for Maxime Ripard
  ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
  ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties

2 files changed, 7 insertions, 17 deletions

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
index 03f195025390..204bdb9857b9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
@@ -406,8 +406,9 @@
 	wlan_pd_n: wlan-pd-n {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan_pd_n";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_module_reset_l>;
 
-		/* Note the wlan_module_reset_l pinctrl */
 		enable-active-high;
 		gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
 
@@ -983,12 +984,6 @@ ap_i2c_audio: &i2c8 {
 	pinctrl-0 = <
 		&ap_pwroff	/* AP will auto-assert this when in S3 */
 		&clk_32k	/* This pin is always 32k on gru boards */
-
-		/*
-		 * We want this driven low ASAP; firmware should help us, but
-		 * we can help ourselves too.
-		 */
-		&wlan_module_reset_l
 	>;
 
 	pcfg_output_low: pcfg-output-low {
@@ -1168,12 +1163,7 @@ ap_i2c_audio: &i2c8 {
 		};
 
 		wlan_module_reset_l: wlan-module-reset-l {
-			/*
-			 * We want this driven low ASAP (As {Soon,Strongly} As
-			 * Possible), to avoid leakage through the powered-down
-			 * WiFi.
-			 */
-			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>;
+			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		bt_host_wake_l: bt-host-wake-l {
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 2605118d4b4c..0b81ca1d07e7 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -411,8 +411,8 @@
 			reg = <0x0 0xfe800000 0x0 0x100000>;
 			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy0_otg>, <&tcphy0_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
+			phys = <&u2phy0_otg>;
+			phy-names = "usb2-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;
@@ -444,8 +444,8 @@
 			reg = <0x0 0xfe900000 0x0 0x100000>;
 			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
 			dr_mode = "otg";
-			phys = <&u2phy1_otg>, <&tcphy1_usb3>;
-			phy-names = "usb2-phy", "usb3-phy";
+			phys = <&u2phy1_otg>;
+			phy-names = "usb2-phy";
 			phy_type = "utmi_wide";
 			snps,dis_enblslpm_quirk;
 			snps,dis-u2-freeclk-exists-quirk;