Merge tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "These are the devicetree updates for Arm and RISC-V based SoCs, mainly
  from Qualcomm, NXP/Freescale, Aspeed, TI, Rockchips, Samsung, ST and
  Starfive.

  Only a few new SoC got added:

   - TI AM62P5, a variant of the existing Sitara AM62x family

   - Intel Agilex5, an FPGFA platform that includes an Cortex-A76/A55
     SoC.

   - Qualcomm ipq5018 is used in wireless access points

   - Qualcomm SM4450 (Snapdragon 4 Gen 2) is a new low-end mobile phone
     platform.

  In total, 29 machines get added, which is low because of the summer
  break. These cover SoCs from Aspeed, Broadcom, NXP, Samsung, ST,
  Allwinner, Amlogic, Intel, Qualcomm, Rockchip, TI and T-Head. Most of
  these are development and reference boards.

  Despite not adding a lot of new machines, there are over 700 patches
  in total, most of which are cleanups and minor fixes"

* tag 'soc-dt-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (735 commits)
  arm64: dts: use capital "OR" for multiple licenses in SPDX
  ARM: dts: use capital "OR" for multiple licenses in SPDX
  arm64: dts: qcom: sdm845-db845c: Mark cont splash memory region as reserved
  ARM: dts: qcom: apq8064: add support to gsbi4 uart
  riscv: dts: change TH1520 files to dual license
  riscv: dts: thead: add BeagleV Ahead board device tree
  dt-bindings: riscv: Add BeagleV Ahead board compatibles
  ARM: dts: stm32: add SCMI PMIC regulators on stm32mp135f-dk board
  ARM: dts: stm32: STM32MP13x SoC exposes SCMI regulators
  dt-bindings: rcc: stm32: add STM32MP13 SCMI regulators IDs
  ARM: dts: stm32: support display on stm32f746-disco board
  ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco
  ARM: dts: stm32: add pin map for LTDC on stm32f7
  ARM: dts: stm32: add ltdc support on stm32f746 MCU
  arm64: dts: qcom: sm6350: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sdm670: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sa8775p: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sc8280xp: Hook up PDC as wakeup-parent of TLMM
  arm64: dts: qcom: sdm670: Add PDC
  riscv: dts: starfive: fix jh7110 qspi sort order
  ...

14 files changed, 173 insertions, 109 deletions

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index f04716841a0c..ccaca29200bb 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -146,24 +146,28 @@
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_REF>,
 		 <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_RX>,
 		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
 };
 
 &gem1 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>,
 		 <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>,
 		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
 };
 
 &gem2 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_REF>,
 		 <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_RX>,
 		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
 };
 
 &gem3 {
 	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_REF>,
 		 <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_RX>,
 		 <&zynqmp_clk GEM_TSU>;
+	assigned-clocks = <&zynqmp_clk GEM_TSU>;
 };
 
 &gpio {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 603839c82599..ae1b9b2bdbee 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -27,8 +27,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* u14 - 0x40 - ina260 */
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
@@ -145,6 +145,7 @@
 	pinctrl-0 = <&pinctrl_gem3_default>;
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
 
 	mdio: mdio {
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a91d09e7da4b..b59e48be6465 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -22,8 +22,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* u14 - 0x40 - ina260 */
 	/* u43 - 0x2d - usb5744 */
@@ -128,6 +128,7 @@
 	pinctrl-0 = <&pinctrl_gem3_default>;
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
 
 	mdio: mdio {
 		#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index dfd1a18f5a10..c4774a42d5fc 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -50,6 +50,17 @@
 		reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		pmu_region: pmu@7ff00000 {
+			reg = <0x0 0x7ff00000 0x0 0x100000>;
+			no-map;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		autorepeat;
@@ -245,8 +256,8 @@
 	status = "okay";
 	bootph-all;
 	clock-frequency = <400000>;
-	scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	eeprom: eeprom@50 { /* u46 - also at address 0x58 */
 		bootph-all;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index d9d1de5f313c..e821d55d8d5a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -119,8 +119,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 37 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 36 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 37 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	eeprom: eeprom@55 {
 		compatible = "atmel,24c64"; /* 24AA64 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 6503f4985f8d..b59e11316b4b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -110,8 +110,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u26: gpio@20 {
 		compatible = "ti,tca6416";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
index b1e933b8a2cd..0d2ea9c09a0a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
@@ -91,8 +91,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 74 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 75 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 74 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 75 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 };
 
 &i2c1 {
@@ -100,8 +100,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 77 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 76 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 77 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 44d1f351bb75..d0091d3cb764 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -180,8 +180,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	clock-frequency = <100000>;
 	i2c-mux@75 { /* u11 */
 		compatible = "nxp,pca9548";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 8767f147cbe3..84952c14f021 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -233,8 +233,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
@@ -497,8 +497,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index e185709c0d84..5084ddcee00f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -140,8 +140,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* Another connection to this bus via PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 7fceebd1815c..b273bd1d920a 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -145,8 +145,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 27b2416cb6d8..50c384aa253e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -245,8 +245,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u97: gpio@20 {
 		compatible = "ti,tca6416";
@@ -508,8 +508,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	/* PL i2c via PCA9306 - u45 */
 	i2c-mux@74 { /* u34 */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index 6224365826d8..617cb0405a7d 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -205,8 +205,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c0_default>;
 	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-	scl-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	tca6416_u22: gpio@20 {
 		compatible = "ti,tca6416";
@@ -385,8 +385,8 @@
 	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1_default>;
 	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
-	sda-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 
 	i2c-mux@74 { /* u26 */
 		compatible = "nxp,pca9548";
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 02cfcc716936..b61fc99cd911 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -14,6 +14,8 @@
 
 #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/power/xlnx-zynqmp-power.h>
 #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
 
@@ -33,6 +35,7 @@
 			operating-points-v2 = <&cpu_opp_table>;
 			reg = <0x0>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu1: cpu@1 {
@@ -42,6 +45,7 @@
 			reg = <0x1>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu2: cpu@2 {
@@ -51,6 +55,7 @@
 			reg = <0x2>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
 		};
 
 		cpu3: cpu@3 {
@@ -60,6 +65,13 @@
 			reg = <0x3>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
 		};
 
 		idle-states {
@@ -121,7 +133,7 @@
 		bootph-all;
 		compatible = "xlnx,zynqmp-ipi-mailbox";
 		interrupt-parent = <&gic>;
-		interrupts = <0 35 4>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		xlnx,ipi-id = <0>;
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -151,10 +163,10 @@
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupt-parent = <&gic>;
-		interrupts = <0 143 4>,
-			     <0 144 4>,
-			     <0 145 4>,
-			     <0 146 4>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-affinity = <&cpu0>,
 				     <&cpu1>,
 				     <&cpu2>,
@@ -177,7 +189,7 @@
 				bootph-all;
 				compatible = "xlnx,zynqmp-power";
 				interrupt-parent = <&gic>;
-				interrupts = <0 35 4>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 				mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>;
 				mbox-names = "tx", "rx";
 			};
@@ -221,10 +233,10 @@
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupt-parent = <&gic>;
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
 	fpga_full: fpga-full {
@@ -264,7 +276,7 @@
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
 			reg = <0x0 0xff060000 0x0 0x1000>;
-			interrupts = <0 23 4>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
@@ -276,7 +288,7 @@
 			status = "disabled";
 			clock-names = "can_clk", "pclk";
 			reg = <0x0 0xff070000 0x0 0x1000>;
-			interrupts = <0 24 4>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 			tx-fifo-depth = <0x40>;
 			rx-fifo-depth = <0x40>;
@@ -295,11 +307,11 @@
 				compatible = "arm,cci-400-pmu,r1";
 				reg = <0x9000 0x5000>;
 				interrupt-parent = <&gic>;
-				interrupts = <0 123 4>,
-					     <0 123 4>,
-					     <0 123 4>,
-					     <0 123 4>,
-					     <0 123 4>;
+				interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
@@ -309,7 +321,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd500000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 124 4>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -322,7 +334,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd510000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 125 4>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -335,7 +347,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd520000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 126 4>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -348,7 +360,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd530000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 127 4>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -361,7 +373,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd540000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 128 4>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -374,7 +386,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd550000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 129 4>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -387,7 +399,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd560000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 130 4>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -400,7 +412,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xfd570000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 131 4>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <128>;
@@ -417,7 +429,7 @@
 			      <0x0 0xf9060000 0x0 0x20000>;
 			interrupt-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		gpu: gpu@fd4b0000 {
@@ -425,8 +437,12 @@
 			compatible = "xlnx,zynqmp-mali", "arm,mali-400";
 			reg = <0x0 0xfd4b0000 0x0 0x10000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 132 4>, <0 132 4>, <0 132 4>,
-				     <0 132 4>, <0 132 4>, <0 132 4>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1";
 			clock-names = "bus", "core";
 			power-domains = <&zynqmp_firmware PD_GPU>;
@@ -441,7 +457,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffa80000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 77 4>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -454,7 +470,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffa90000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 78 4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -467,7 +483,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffaa0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 79 4>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -480,7 +496,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffab0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 80 4>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -493,7 +509,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffac0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 81 4>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -506,7 +522,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffad0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 82 4>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -519,7 +535,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffae0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 83 4>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -532,7 +548,7 @@
 			compatible = "xlnx,zynqmp-dma-1.0";
 			reg = <0x0 0xffaf0000 0x0 0x1000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 84 4>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "clk_main", "clk_apb";
 			#dma-cells = <1>;
 			xlnx,bus-width = <64>;
@@ -544,7 +560,7 @@
 			compatible = "xlnx,zynqmp-ddrc-2.40a";
 			reg = <0x0 0xfd070000 0x0 0x30000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 112 4>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		nand0: nand-controller@ff100000 {
@@ -553,7 +569,7 @@
 			reg = <0x0 0xff100000 0x0 0x1000>;
 			clock-names = "controller", "bus";
 			interrupt-parent = <&gic>;
-			interrupts = <0 14 4>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			iommus = <&smmu 0x872>;
@@ -564,7 +580,8 @@
 			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 57 4>, <0 57 4>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0b0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
@@ -579,7 +596,8 @@
 			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 59 4>, <0 59 4>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0c0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
@@ -594,7 +612,8 @@
 			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 61 4>, <0 61 4>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0d0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
@@ -609,7 +628,8 @@
 			compatible = "xlnx,zynqmp-gem", "cdns,gem";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 63 4>, <0 63 4>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff0e0000 0x0 0x1000>;
 			clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
 			#address-cells = <1>;
@@ -626,7 +646,7 @@
 			#gpio-cells = <0x2>;
 			gpio-controller;
 			interrupt-parent = <&gic>;
-			interrupts = <0 16 4>;
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
 			reg = <0x0 0xff0a0000 0x0 0x1000>;
@@ -637,7 +657,8 @@
 			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 17 4>;
+			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
 			reg = <0x0 0xff020000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -648,7 +669,8 @@
 			compatible = "cdns,i2c-r1p14";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 18 4>;
+			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
 			reg = <0x0 0xff030000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -664,11 +686,11 @@
 			msi-controller;
 			device_type = "pci";
 			interrupt-parent = <&gic>;
-			interrupts = <0 118 4>,
-				     <0 117 4>,
-				     <0 116 4>,
-				     <0 115 4>,	/* MSI_1 [63...32] */
-				     <0 114 4>;	/* MSI_0 [31...0] */
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,	/* MSI_1 [63...32] */
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;	/* MSI_0 [31...0] */
 			interrupt-names = "misc", "dummy", "intx",
 					  "msi1", "msi0";
 			msi-parent = <&pcie>;
@@ -698,7 +720,7 @@
 			compatible = "xlnx,zynqmp-qspi-1.0";
 			status = "disabled";
 			clock-names = "ref_clk", "pclk";
-			interrupts = <0 15 4>;
+			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 			num-cs = <1>;
 			reg = <0x0 0xff0f0000 0x0 0x1000>,
@@ -723,7 +745,8 @@
 			status = "disabled";
 			reg = <0x0 0xffa60000 0x0 0x100>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 26 4>, <0 27 4>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "alarm", "sec";
 			calibration = <0x7FFF>;
 		};
@@ -733,7 +756,7 @@
 			status = "disabled";
 			reg = <0x0 0xfd0c0000 0x0 0x2000>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 133 4>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 			power-domains = <&zynqmp_firmware PD_SATA>;
 			resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
 			iommus = <&smmu 0x4c0>, <&smmu 0x4c1>,
@@ -745,7 +768,7 @@
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 48 4>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff160000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 			iommus = <&smmu 0x870>;
@@ -760,7 +783,7 @@
 			compatible = "xlnx,zynqmp-8.9a", "arasan,sdhci-8.9a";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 49 4>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff170000 0x0 0x1000>;
 			clock-names = "clk_xin", "clk_ahb";
 			iommus = <&smmu 0x871>;
@@ -777,18 +800,30 @@
 			status = "disabled";
 			#global-interrupts = <1>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 155 4>,
-				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
-				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
-				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>,
-				<0 155 4>, <0 155 4>, <0 155 4>, <0 155 4>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		spi0: spi@ff040000 {
 			compatible = "cdns,spi-r1p6";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 19 4>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff040000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
@@ -800,7 +835,7 @@
 			compatible = "cdns,spi-r1p6";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 20 4>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff050000 0x0 0x1000>;
 			clock-names = "ref_clk", "pclk";
 			#address-cells = <1>;
@@ -812,7 +847,9 @@
 			compatible = "cdns,ttc";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff110000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&zynqmp_firmware PD_TTC_0>;
@@ -822,7 +859,9 @@
 			compatible = "cdns,ttc";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff120000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&zynqmp_firmware PD_TTC_1>;
@@ -832,7 +871,9 @@
 			compatible = "cdns,ttc";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff130000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&zynqmp_firmware PD_TTC_2>;
@@ -842,7 +883,9 @@
 			compatible = "cdns,ttc";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff140000 0x0 0x1000>;
 			timer-width = <32>;
 			power-domains = <&zynqmp_firmware PD_TTC_3>;
@@ -853,7 +896,7 @@
 			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 21 4>;
+			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff000000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&zynqmp_firmware PD_UART_0>;
@@ -864,7 +907,7 @@
 			compatible = "xlnx,zynqmp-uart", "cdns,uart-r1p12";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 22 4>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xff010000 0x0 0x1000>;
 			clock-names = "uart_clk", "pclk";
 			power-domains = <&zynqmp_firmware PD_UART_1>;
@@ -888,8 +931,10 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0xfe200000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
-				interrupt-names = "dwc_usb3", "otg";
-				interrupts = <0 65 4>, <0 69 4>;
+				interrupt-names = "host", "peripheral", "otg";
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x860>;
 				snps,quirk-frame-length-adjustment = <0x20>;
@@ -915,8 +960,10 @@
 				compatible = "snps,dwc3";
 				reg = <0x0 0xfe300000 0x0 0x40000>;
 				interrupt-parent = <&gic>;
-				interrupt-names = "dwc_usb3", "otg";
-				interrupts = <0 70 4>, <0 74 4>;
+				interrupt-names = "host", "peripheral", "otg";
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "bus_early", "ref";
 				iommus = <&smmu 0x861>;
 				snps,quirk-frame-length-adjustment = <0x20>;
@@ -929,7 +976,7 @@
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 113 1>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
 			reg = <0x0 0xfd4d0000 0x0 0x1000>;
 			timeout-sec = <60>;
 			reset-on-timeout;
@@ -939,7 +986,7 @@
 			compatible = "cdns,wdt-r1p2";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 52 1>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_EDGE_RISING>;
 			reg = <0x0 0xff150000 0x0 0x1000>;
 			timeout-sec = <10>;
 		};
@@ -948,7 +995,7 @@
 			compatible = "xlnx,zynqmp-ams";
 			status = "disabled";
 			interrupt-parent = <&gic>;
-			interrupts = <0 56 4>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x0 0xffa50000 0x0 0x800>;
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -974,7 +1021,7 @@
 			compatible = "xlnx,zynqmp-dpdma";
 			status = "disabled";
 			reg = <0x0 0xfd4c0000 0x0 0x1000>;
-			interrupts = <0 122 4>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 			clock-names = "axi_clk";
 			power-domains = <&zynqmp_firmware PD_DP>;
@@ -990,7 +1037,7 @@
 			      <0x0 0xfd4ab000 0x0 0x1000>,
 			      <0x0 0xfd4ac000 0x0 0x1000>;
 			reg-names = "dp", "blend", "av_buf", "aud";
-			interrupts = <0 119 4>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&gic>;
 			clock-names = "dp_apb_clk", "dp_aud_clk",
 				      "dp_vtc_pixel_clk_in";