Merge branch 'linus' into objtool/core, to pick up Xen dependencies

Pick up dependencies - freshly merged upstream via xen-next - before applying
dependent objtool changes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 33 insertions, 50 deletions

diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 1eb423e4be24..f942c5afea9b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -132,7 +132,7 @@
 		key-vol-up {
 			label = "Volume up";
 			linux,code = <KEY_VOLUMEUP>;
-			gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+			gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -166,7 +166,7 @@
 };
 
 &apps_rsc {
-	pm8998-rpmh-regulators {
+	regulators-0 {
 		compatible = "qcom,pm8998-rpmh-regulators";
 		qcom,pmic-id = "a";
 
@@ -419,7 +419,7 @@
 		};
 	};
 
-	pmi8998-rpmh-regulators {
+	regulators-1 {
 		compatible = "qcom,pmi8998-rpmh-regulators";
 		qcom,pmic-id = "b";
 
@@ -433,7 +433,7 @@
 		};
 	};
 
-	pm8005-rpmh-regulators {
+	regulators-2 {
 		compatible = "qcom,pm8005-rpmh-regulators";
 		qcom,pmic-id = "c";
 
@@ -474,22 +474,17 @@
 };
 
 &ipa {
+	qcom,gsi-loader = "modem";
 	status = "okay";
-	modem-init;
 };
 
 &mss_pil {
 	status = "okay";
 };
 
-&pm8998_pon {
-	resin {
-		compatible = "qcom,pm8941-resin";
-		interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_VOLUMEDOWN>;
-	};
+&pm8998_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
 };
 
 &sdhc_2 {
@@ -558,52 +553,40 @@
 &tlmm {
 	gpio-reserved-ranges = <28 4>, <81 4>;
 
-	sdc2_clk: sdc2-clk {
-		pinconf {
-			pins = "sdc2_clk";
-			bias-disable;
-
-			/*
-			 * It seems that mmc_test reports errors if drive
-			 * strength is not 16 on clk, cmd, and data pins.
-			 *
-			 * TODO: copy-pasted from mtp, try other values
-			 * on these devices.
-			 */
-			drive-strength = <16>;
-		};
+	sdc2_clk: sdc2-clk-state {
+		pins = "sdc2_clk";
+		bias-disable;
+
+		/*
+		 * It seems that mmc_test reports errors if drive
+		 * strength is not 16 on clk, cmd, and data pins.
+		 *
+		 * TODO: copy-pasted from mtp, try other values
+		 * on these devices.
+		 */
+		drive-strength = <16>;
 	};
 
-	sdc2_cmd: sdc2-cmd {
-		pinconf {
-			pins = "sdc2_cmd";
-			bias-pull-up;
-			drive-strength = <16>;
-		};
+	sdc2_cmd: sdc2-cmd-state {
+		pins = "sdc2_cmd";
+		bias-pull-up;
+		drive-strength = <16>;
 	};
 
-	sdc2_data: sdc2-data {
-		pinconf {
-			pins = "sdc2_data";
-			bias-pull-up;
-			drive-strength = <16>;
-		};
+	sdc2_data: sdc2-data-state {
+		pins = "sdc2_data";
+		bias-pull-up;
+		drive-strength = <16>;
 	};
 
-	sd_card_det_n: sd-card-det-n {
-		pinmux {
-			pins = "gpio126";
-			function = "gpio";
-		};
-
-		pinconf {
-			pins = "gpio126";
-			bias-pull-up;
-		};
+	sd_card_det_n: sd-card-det-n-state {
+		pins = "gpio126";
+		function = "gpio";
+		bias-pull-up;
 	};
 };
 
-&pm8998_gpio {
+&pm8998_gpios {
 	vol_up_pin_a: vol-up-active-state {
 		pins = "gpio6";
 		function = "normal";