Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Arnd Bergmann:
 "We add device tree files for a couple of additional SoCs in various
  areas:

  Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
  networking, Amlogic A113D for audio, and Renesas R-Car V3M for
  automotive.

  As usual, lots of new boards get added based on those and other SoCs:

   - Actions S500 based CubieBoard6 single-board computer

   - Amlogic Meson-AXG A113D based development board
   - Amlogic S912 based Khadas VIM2 single-board computer
   - Amlogic S912 based Tronsmart Vega S96 set-top-box

   - Allwinner H5 based NanoPi NEO Plus2 single-board computer
   - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
   - Allwinner A83T based TBS A711 Tablet

   - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
   - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
     wireless access points and routers

   - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
   - NXP i.MX53 based GE Healthcare PPD biometric monitor
   - NXP i.MX6 based Pistachio single-board computer
   - NXP i.MX6 based Vining-2000 automotive diagnostic interface
   - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants

   - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
   - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet

   - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA

   - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
   - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
   - Renasas r8a7745 based iWave G22D-SODIMM SoM

   - Rockchip rk3288 based Amarula Vyasa single-board computer

   - Samsung Exynos5800 based Odroid HC1 single-board computer

  For existing SoC support, there was a lot of ongoing work, as usual
  most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
  Amlogic and Allwinner platforms, but others were also active.

  Rob Herring and many others worked on reducing the number of issues
  that the latest version of 'dtc' now warns about. Unfortunately there
  is still a lot left to do.

  A rework of the ARM foundation model introduced several new files for
  common variations of the model"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
  arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
  dt-bindings: bus: Add documentation for the Technologic Systems NBUS
  arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
  ARM: dts: owl-s500: Add CubieBoard6
  dt-bindings: arm: actions: Add CubieBoard6
  ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
  ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
  arm: dts: mt7623: remove unused compatible string for pio node
  arm: dts: mt7623: update usb related nodes
  arm: dts: mt7623: update crypto node
  ARM: dts: sun8i: a711: Enable USB OTG
  ARM: dts: sun8i: a711: Add regulator support
  ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
  ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
  ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
  ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
  ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
  ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
  ARM: dts: sunxi: Add dtsi for AXP81x PMIC
  arm64: dts: allwinner: H5: Restore EMAC changes
  ...

7 files changed, 62 insertions, 62 deletions

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
index ab4ae1a32fab..f00c21e0767e 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-xmc.dts
@@ -114,7 +114,7 @@
 			reg = <0x04000000 0x06400000>; /*  100MB */
 		};
 
-		partition@0a400000{
+		partition@a400000{
 			label = "ncustfs";
 			reg = <0x0a400000 0x35c00000>; /*  860MB */
 		};
diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
index 35c8457e3d1f..4a2a6af8e752 100644
--- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
@@ -77,7 +77,7 @@
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		CLUSTER0_L2: l2-cache@000 {
+		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
 		};
 	};
@@ -367,7 +367,7 @@
 			#size-cells = <1>;
 			ranges = <0 0x652e0000 0x80000>;
 
-			v2m0: v2m@00000 {
+			v2m0: v2m@0 {
 				compatible = "arm,gic-v2m-frame";
 				interrupt-parent = <&gic>;
 				msi-controller;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
index cbc43376e25e..3a4d4524b5ed 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
@@ -46,7 +46,7 @@
 			clock-mult = <1>;
 		};
 
-		genpll0: genpll0@0001d104 {
+		genpll0: genpll0@1d104 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll0";
 			reg = <0x0001d104 0x32>,
@@ -58,7 +58,7 @@
 					     "clk_paxc_axi";
 		};
 
-		genpll3: genpll3@0001d1e0 {
+		genpll3: genpll3@1d1e0 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll3";
 			reg = <0x0001d1e0 0x32>,
@@ -68,7 +68,7 @@
 					     "clk_sdio";
 		};
 
-		genpll4: genpll4@0001d214 {
+		genpll4: genpll4@1d214 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll4";
 			reg = <0x0001d214 0x32>,
@@ -80,7 +80,7 @@
 					     "clk_bridge_fscpu";
 		};
 
-		genpll5: genpll5@0001d248 {
+		genpll5: genpll5@1d248 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-genpll5";
 			reg = <0x0001d248 0x32>,
@@ -90,7 +90,7 @@
 					     "crypto_ae_clk", "raid_ae_clk";
 		};
 
-		lcpll0: lcpll0@0001d0c4 {
+		lcpll0: lcpll0@1d0c4 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-lcpll0";
 			reg = <0x0001d0c4 0x3c>,
@@ -101,7 +101,7 @@
 					     "clk_sata_500";
 		};
 
-		lcpll1: lcpll1@0001d138 {
+		lcpll1: lcpll1@1d138 {
 			#clock-cells = <1>;
 			compatible = "brcm,sr-lcpll1";
 			reg = <0x0001d138 0x3c>,
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
index 8bf1dc6b46ca..9666969c8c88 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-fs4.dtsi
@@ -36,7 +36,7 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x67000000 0x00800000>;
 
-		crypto_mbox: crypto_mbox@00000000 {
+		crypto_mbox: crypto_mbox@0 {
 			compatible = "brcm,iproc-flexrm-mbox";
 			reg = <0x00000000 0x200000>;
 			msi-parent = <&gic_its 0x4100>;
@@ -44,7 +44,7 @@
 			dma-coherent;
 		};
 
-		raid_mbox: raid_mbox@00400000 {
+		raid_mbox: raid_mbox@400000 {
 			compatible = "brcm,iproc-flexrm-mbox";
 			reg = <0x00400000 0x200000>;
 			dma-coherent;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
index 15214d05fec1..8a3a770e8f2c 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-pinctrl.dtsi
@@ -32,7 +32,7 @@
 
 #include <dt-bindings/pinctrl/brcm,pinctrl-stingray.h>
 
-		pinconf: pinconf@00140000 {
+		pinconf: pinconf@140000 {
 			compatible = "pinconf-single";
 			reg = <0x00140000 0x250>;
 			pinctrl-single,register-width = <32>;
@@ -40,7 +40,7 @@
 			/* pinconf functions */
 		};
 
-		pinmux: pinmux@0014029c {
+		pinmux: pinmux@14029c {
 			compatible = "pinctrl-single";
 			reg = <0x0014029c 0x250>;
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
index a774709388df..4b5465da81d8 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-sata.dtsi
@@ -36,7 +36,7 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x67d00000 0x00800000>;
 
-		sata0: ahci@00210000 {
+		sata0: ahci@210000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00210000 0x1000>;
 			reg-names = "ahci";
@@ -52,7 +52,7 @@
 			};
 		};
 
-		sata_phy0: sata_phy@00212100 {
+		sata_phy0: sata_phy@212100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00212100 0x1000>;
 			reg-names = "phy";
@@ -66,7 +66,7 @@
 			};
 		};
 
-		sata1: ahci@00310000 {
+		sata1: ahci@310000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00310000 0x1000>;
 			reg-names = "ahci";
@@ -82,7 +82,7 @@
 			};
 		};
 
-		sata_phy1: sata_phy@00312100 {
+		sata_phy1: sata_phy@312100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00312100 0x1000>;
 			reg-names = "phy";
@@ -96,7 +96,7 @@
 			};
 		};
 
-		sata2: ahci@00120000 {
+		sata2: ahci@120000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00120000 0x1000>;
 			reg-names = "ahci";
@@ -112,7 +112,7 @@
 			};
 		};
 
-		sata_phy2: sata_phy@00122100 {
+		sata_phy2: sata_phy@122100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00122100 0x1000>;
 			reg-names = "phy";
@@ -126,7 +126,7 @@
 			};
 		};
 
-		sata3: ahci@00130000 {
+		sata3: ahci@130000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00130000 0x1000>;
 			reg-names = "ahci";
@@ -142,7 +142,7 @@
 			};
 		};
 
-		sata_phy3: sata_phy@00132100 {
+		sata_phy3: sata_phy@132100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00132100 0x1000>;
 			reg-names = "phy";
@@ -156,7 +156,7 @@
 			};
 		};
 
-		sata4: ahci@00330000 {
+		sata4: ahci@330000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00330000 0x1000>;
 			reg-names = "ahci";
@@ -172,7 +172,7 @@
 			};
 		};
 
-		sata_phy4: sata_phy@00332100 {
+		sata_phy4: sata_phy@332100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00332100 0x1000>;
 			reg-names = "phy";
@@ -186,7 +186,7 @@
 			};
 		};
 
-		sata5: ahci@00400000 {
+		sata5: ahci@400000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00400000 0x1000>;
 			reg-names = "ahci";
@@ -202,7 +202,7 @@
 			};
 		};
 
-		sata_phy5: sata_phy@00402100 {
+		sata_phy5: sata_phy@402100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00402100 0x1000>;
 			reg-names = "phy";
@@ -216,7 +216,7 @@
 			};
 		};
 
-		sata6: ahci@00410000 {
+		sata6: ahci@410000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00410000 0x1000>;
 			reg-names = "ahci";
@@ -232,7 +232,7 @@
 			};
 		};
 
-		sata_phy6: sata_phy@00412100 {
+		sata_phy6: sata_phy@412100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00412100 0x1000>;
 			reg-names = "phy";
@@ -246,7 +246,7 @@
 			};
 		};
 
-		sata7: ahci@00420000 {
+		sata7: ahci@420000 {
 			compatible = "brcm,iproc-ahci", "generic-ahci";
 			reg = <0x00420000 0x1000>;
 			reg-names = "ahci";
@@ -262,7 +262,7 @@
 			};
 		};
 
-		sata_phy7: sata_phy@00422100 {
+		sata_phy7: sata_phy@422100 {
 			compatible = "brcm,iproc-sr-sata-phy";
 			reg = <0x00422100 0x1000>;
 			reg-names = "phy";
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index e6f75c633623..99aaff0b6d72 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -42,7 +42,7 @@
 		#address-cells = <2>;
 		#size-cells = <0>;
 
-		cpu@000 {
+		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x0>;
@@ -50,7 +50,7 @@
 			next-level-cache = <&CLUSTER0_L2>;
 		};
 
-		cpu@001 {
+		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a72", "arm,armv8";
 			reg = <0x0 0x1>;
@@ -106,7 +106,7 @@
 			next-level-cache = <&CLUSTER3_L2>;
 		};
 
-		CLUSTER0_L2: l2-cache@000 {
+		CLUSTER0_L2: l2-cache@0 {
 			compatible = "cache";
 		};
 
@@ -152,13 +152,13 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x61000000 0x05000000>;
 
-		ccn: ccn@00000000 {
+		ccn: ccn@0 {
 			compatible = "arm,ccn-502";
 			reg = <0x00000000 0x900000>;
 			interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		gic: interrupt-controller@02c00000 {
+		gic: interrupt-controller@2c00000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
 			#address-cells = <1>;
@@ -177,7 +177,7 @@
 			};
 		};
 
-		smmu: mmu@03000000 {
+		smmu: mmu@3000000 {
 			compatible = "arm,mmu-500";
 			reg = <0x03000000 0x80000>;
 			#global-interrupts = <1>;
@@ -258,7 +258,7 @@
 
 		#include "stingray-clock.dtsi"
 
-		gpio_crmu: gpio@00024800 {
+		gpio_crmu: gpio@24800 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x00024800 0x4c>;
 			ngpios = <6>;
@@ -278,7 +278,7 @@
 
 		#include "stingray-pinctrl.dtsi"
 
-		mdio_mux_iproc: mdio-mux@0002023c {
+		mdio_mux_iproc: mdio-mux@2023c {
 			compatible = "brcm,mdio-mux-iproc";
 			reg = <0x0002023c 0x14>;
 			#address-cells = <1>;
@@ -309,7 +309,7 @@
 			};
 		};
 
-		pwm: pwm@00010000 {
+		pwm: pwm@10000 {
 			compatible = "brcm,iproc-pwm";
 			reg = <0x00010000 0x1000>;
 			clocks = <&crmu_ref25m>;
@@ -317,7 +317,7 @@
 			status = "disabled";
 		};
 
-		timer0: timer@00030000 {
+		timer0: timer@30000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00030000 0x1000>;
 			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
@@ -328,7 +328,7 @@
 			status = "disabled";
 		};
 
-		timer1: timer@00040000 {
+		timer1: timer@40000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00040000 0x1000>;
 			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +338,7 @@
 			clock-names = "timer1", "timer2", "apb_pclk";
 		};
 
-		timer2: timer@00050000 {
+		timer2: timer@50000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00050000 0x1000>;
 			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
@@ -349,7 +349,7 @@
 			status = "disabled";
 		};
 
-		timer3: timer@00060000 {
+		timer3: timer@60000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00060000 0x1000>;
 			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
@@ -360,7 +360,7 @@
 			status = "disabled";
 		};
 
-		timer4: timer@00070000 {
+		timer4: timer@70000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00070000 0x1000>;
 			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
@@ -371,7 +371,7 @@
 			status = "disabled";
 		};
 
-		timer5: timer@00080000 {
+		timer5: timer@80000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00080000 0x1000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
@@ -382,7 +382,7 @@
 			status = "disabled";
 		};
 
-		timer6: timer@00090000 {
+		timer6: timer@90000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x00090000 0x1000>;
 			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
@@ -393,7 +393,7 @@
 			status = "disabled";
 		};
 
-		timer7: timer@000a0000 {
+		timer7: timer@a0000 {
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x000a0000 0x1000>;
 			interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
@@ -404,7 +404,7 @@
 			status = "disabled";
 		};
 
-		i2c0: i2c@000b0000 {
+		i2c0: i2c@b0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x000b0000 0x100>;
 			#address-cells = <1>;
@@ -414,7 +414,7 @@
 			status = "disabled";
 		};
 
-		wdt0: watchdog@000c0000 {
+		wdt0: watchdog@c0000 {
 			compatible = "arm,sp805", "arm,primecell";
 			reg = <0x000c0000 0x1000>;
 			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,7 +422,7 @@
 			clock-names = "wdogclk", "apb_pclk";
 		};
 
-		gpio_hsls: gpio@000d0000 {
+		gpio_hsls: gpio@d0000 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x000d0000 0x864>;
 			ngpios = <151>;
@@ -448,7 +448,7 @@
 					<&pinmux 151 91 4>;
 		};
 
-		i2c1: i2c@000e0000 {
+		i2c1: i2c@e0000 {
 			compatible = "brcm,iproc-i2c";
 			reg = <0x000e0000 0x100>;
 			#address-cells = <1>;
@@ -458,7 +458,7 @@
 			status = "disabled";
 		};
 
-		uart0: uart@00100000 {
+		uart0: uart@100000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00100000 0x1000>;
@@ -469,7 +469,7 @@
 			status = "disabled";
 		};
 
-		uart1: uart@00110000 {
+		uart1: uart@110000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00110000 0x1000>;
@@ -480,7 +480,7 @@
 			status = "disabled";
 		};
 
-		uart2: uart@00120000 {
+		uart2: uart@120000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00120000 0x1000>;
@@ -491,7 +491,7 @@
 			status = "disabled";
 		};
 
-		uart3: uart@00130000 {
+		uart3: uart@130000 {
 			device_type = "serial";
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00130000 0x1000>;
@@ -502,7 +502,7 @@
 			status = "disabled";
 		};
 
-		ssp0: ssp@00180000 {
+		ssp0: ssp@180000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00180000 0x1000>;
 			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
@@ -514,7 +514,7 @@
 			status = "disabled";
 		};
 
-		ssp1: ssp@00190000 {
+		ssp1: ssp@190000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x00190000 0x1000>;
 			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
@@ -526,12 +526,12 @@
 			status = "disabled";
 		};
 
-		hwrng: hwrng@00220000 {
+		hwrng: hwrng@220000 {
 			compatible = "brcm,iproc-rng200";
 			reg = <0x00220000 0x28>;
 		};
 
-		dma0: dma@00310000 {
+		dma0: dma@310000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x00310000 0x1000>;
 			interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
@@ -551,7 +551,7 @@
 			iommus = <&smmu 0x6000 0x0000>;
 		};
 
-		enet: ethernet@00340000{
+		enet: ethernet@340000{
 			compatible = "brcm,amac";
 			reg = <0x00340000 0x1000>;
 			reg-names = "amac_base";
@@ -560,7 +560,7 @@
 			status= "disabled";
 		};
 
-		nand: nand@00360000 {
+		nand: nand@360000 {
 			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
 			reg = <0x00360000 0x600>,
 			      <0x0050a408 0x600>,
@@ -573,7 +573,7 @@
 			status = "disabled";
 		};
 
-		sdio0: sdhci@003f1000 {
+		sdio0: sdhci@3f1000 {
 			compatible = "brcm,sdhci-iproc";
 			reg = <0x003f1000 0x100>;
 			interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
@@ -583,7 +583,7 @@
 			status = "disabled";
 		};
 
-		sdio1: sdhci@003f2000 {
+		sdio1: sdhci@3f2000 {
 			compatible = "brcm,sdhci-iproc";
 			reg = <0x003f2000 0x100>;
 			interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;