Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (113 commits)
  omap4: Add support for i2c init
  omap: Fix i2c platform init code for omap4
  OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y
  OMAP powerdomain, hwmod, omap_device: add some credits
  OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains
  OMAP3 clock: add support for setting the divider for sys_clkout2 using clk_set_rate
  OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains
  OMAP: timers: Fix clock source names for OMAP4
  OMAP4 clock: Support clk_set_parent
  OMAP4: PRCM: Add offset defines for all CM registers
  OMAP4: PRCM: Add offset defines for all PRM registers
  OMAP4: PRCM: Remove duplicate definition of base addresses
  OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention
  OMAP4: CM: Remove non-functional registers in ES1.0
  OMAP: hwmod: Replace WARN by pr_warning for clockdomain check
  OMAP: hwmod: Rename hwmod name for the MPU
  OMAP: hwmod: Do not exit the iteration if one clock init failed
  OMAP: hwmod: Replace WARN by pr_warning if clock lookup failed
  OMAP: hwmod: Remove IS_ERR check with omap_clk_get_by_name return value
  OMAP: hwmod: Fix wrong pointer iteration in oh->slaves
  ...

23 files changed, 406 insertions, 296 deletions

diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 6da796ef82bd..78b49a626d06 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -110,8 +110,13 @@ config OMAP_IOMMU
 	tristate
 
 config OMAP_IOMMU_DEBUG
-	depends on OMAP_IOMMU
-	tristate
+       tristate "Export OMAP IOMMU internals in DebugFS"
+       depends on OMAP_IOMMU && DEBUG_FS
+       help
+         Select this to see extensive information about
+         the internal state of OMAP IOMMU in debugfs.
+
+         Say N unless you know you need this.
 
 choice
 	prompt "System timer"
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 5261a0923691..7190cbd92620 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -12,14 +12,12 @@
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
 #include <linux/clk.h>
 #include <linux/mutex.h>
-#include <linux/platform_device.h>
 #include <linux/cpufreq.h>
 #include <linux/debugfs.h>
 #include <linux/io.h>
@@ -32,9 +30,9 @@ static DEFINE_SPINLOCK(clockfw_lock);
 
 static struct clk_functions *arch_clock;
 
-/*-------------------------------------------------------------------------
+/*
  * Standard clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
 
 int clk_enable(struct clk *clk)
 {
@@ -92,9 +90,9 @@ unsigned long clk_get_rate(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_rate);
 
-/*-------------------------------------------------------------------------
+/*
  * Optional clock functions defined in include/linux/clk.h
- *-------------------------------------------------------------------------*/
+ */
 
 long clk_round_rate(struct clk *clk, unsigned long rate)
 {
@@ -140,9 +138,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	unsigned long flags;
 	int ret = -EINVAL;
 
-	if (cpu_is_omap44xx())
-	/* OMAP4 clk framework not supported yet */
-		return 0;
 	if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
 		return ret;
 
@@ -169,9 +164,9 @@ struct clk *clk_get_parent(struct clk *clk)
 }
 EXPORT_SYMBOL(clk_get_parent);
 
-/*-------------------------------------------------------------------------
+/*
  * OMAP specific clock functions shared between omap1 and omap2
- *-------------------------------------------------------------------------*/
+ */
 
 int __initdata mpurate;
 
@@ -222,7 +217,7 @@ void clk_reparent(struct clk *child, struct clk *parent)
 }
 
 /* Propagate rate to children */
-void propagate_rate(struct clk * tclk)
+void propagate_rate(struct clk *tclk)
 {
 	struct clk *clkp;
 
@@ -389,7 +384,9 @@ void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
 }
 #endif
 
-/*-------------------------------------------------------------------------*/
+/*
+ *
+ */
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 /*
@@ -404,7 +401,7 @@ static int __init clk_disable_unused(void)
 		if (ck->ops == &clkops_null)
 			continue;
 
-		if (ck->usecount > 0 || ck->enable_reg == 0)
+		if (ck->usecount > 0 || !ck->enable_reg)
 			continue;
 
 		spin_lock_irqsave(&clockfw_lock, flags);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index f12f0e39ddf2..219c01e82bc5 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -47,9 +47,6 @@
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
-/* used by omap-smp.c and board-4430sdp.c */
-void __iomem *gic_cpu_base_addr;
-
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 1d959965ff52..f7f571e7987e 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -501,7 +501,8 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 			burst = 0x2;
 			break;
 		}
-		/* not supported by current hardware on OMAP1
+		/*
+		 * not supported by current hardware on OMAP1
 		 * w |= (0x03 << 7);
 		 * fall through
 		 */
@@ -510,7 +511,8 @@ void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 			burst = 0x3;
 			break;
 		}
-		/* OMAP1 don't support burst 16
+		/*
+		 * OMAP1 don't support burst 16
 		 * fall through
 		 */
 	default:
@@ -604,7 +606,8 @@ void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 			burst = 0x3;
 			break;
 		}
-		/* OMAP1 don't support burst 16
+		/*
+		 * OMAP1 don't support burst 16
 		 * fall through
 		 */
 	default:
@@ -709,6 +712,21 @@ static inline void omap2_enable_irq_lch(int lch)
 	spin_unlock_irqrestore(&dma_chan_lock, flags);
 }
 
+static inline void omap2_disable_irq_lch(int lch)
+{
+	u32 val;
+	unsigned long flags;
+
+	if (!cpu_class_is_omap2())
+		return;
+
+	spin_lock_irqsave(&dma_chan_lock, flags);
+	val = dma_read(IRQENABLE_L0);
+	val &= ~(1 << lch);
+	dma_write(val, IRQENABLE_L0);
+	spin_unlock_irqrestore(&dma_chan_lock, flags);
+}
+
 int omap_request_dma(int dev_id, const char *dev_name,
 		     void (*callback)(int lch, u16 ch_status, void *data),
 		     void *data, int *dma_ch_out)
@@ -807,14 +825,7 @@ void omap_free_dma(int lch)
 	}
 
 	if (cpu_class_is_omap2()) {
-		u32 val;
-
-		spin_lock_irqsave(&dma_chan_lock, flags);
-		/* Disable interrupts */
-		val = dma_read(IRQENABLE_L0);
-		val &= ~(1 << lch);
-		dma_write(val, IRQENABLE_L0);
-		spin_unlock_irqrestore(&dma_chan_lock, flags);
+		omap2_disable_irq_lch(lch);
 
 		/* Clear the CSR register and IRQ status register */
 		dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch));
@@ -1277,8 +1288,10 @@ int omap_request_dma_chain(int dev_id, const char *dev_name,
 		return -EINVAL;
 	}
 
-	/* Allocate a queue to maintain the status of the channels
-	 * in the chain */
+	/*
+	 * Allocate a queue to maintain the status of the channels
+	 * in the chain
+	 */
 	channels = kmalloc(sizeof(*channels) * no_of_chans, GFP_KERNEL);
 	if (channels == NULL) {
 		printk(KERN_ERR "omap_dma: No memory for channel queue\n");
@@ -1907,7 +1920,8 @@ static int omap2_dma_handle_ch(int ch)
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
 		if (cpu_class_is_omap2()) {
-			/* Errata: sDMA Channel is not disabled
+			/*
+			 * Errata: sDMA Channel is not disabled
 			 * after a transaction error. So we explicitely
 			 * disable the channel
 			 */
@@ -2107,6 +2121,9 @@ static int __init omap_init_dma(void)
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
 		omap_clear_dma(ch);
+		if (cpu_class_is_omap2())
+			omap2_disable_irq_lch(ch);
+
 		dma_chan[ch].dev_id = -1;
 		dma_chan[ch].next_lch = -1;
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 4d99dfbc8bef..c64875f11fac 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -264,8 +264,8 @@ static struct omap_dm_timer omap4_dm_timers[] = {
 	{ .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
 };
 static const char *omap4_dm_source_names[] __initdata = {
-	"sys_ck",
-	"omap_32k_fck",
+	"sys_clkin_ck",
+	"sys_32k_ck",
 	NULL
 };
 static struct clk *omap4_dm_source_clocks[2];
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 45a225d09125..dc2ac42d6319 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -27,6 +27,7 @@
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <asm/mach/irq.h>
+#include <plat/powerdomain.h>
 
 /*
  * OMAP1510 GPIO registers
@@ -137,7 +138,11 @@
 #define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
 #define OMAP4_GPIO_IRQWAKEN0		0x0044
 #define OMAP4_GPIO_IRQWAKEN1		0x0048
-#define OMAP4_GPIO_SYSSTATUS		0x0104
+#define OMAP4_GPIO_SYSSTATUS		0x0114
+#define OMAP4_GPIO_IRQENABLE1		0x011c
+#define OMAP4_GPIO_WAKE_EN		0x0120
+#define OMAP4_GPIO_IRQSTATUS2		0x0128
+#define OMAP4_GPIO_IRQENABLE2		0x012c
 #define OMAP4_GPIO_CTRL			0x0130
 #define OMAP4_GPIO_OE			0x0134
 #define OMAP4_GPIO_DATAIN		0x0138
@@ -148,6 +153,10 @@
 #define OMAP4_GPIO_FALLINGDETECT	0x014c
 #define OMAP4_GPIO_DEBOUNCENABLE	0x0150
 #define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
+#define OMAP4_GPIO_SETIRQENABLE1	0x0164
+#define OMAP4_GPIO_CLEARWKUENA		0x0180
+#define OMAP4_GPIO_SETWKUENA		0x0184
 #define OMAP4_GPIO_CLEARDATAOUT		0x0190
 #define OMAP4_GPIO_SETDATAOUT		0x0194
 /*
@@ -195,6 +204,7 @@ struct gpio_bank {
 	struct gpio_chip chip;
 	struct clk *dbck;
 	u32 mod_usage;
+	u32 dbck_enable_mask;
 };
 
 #define METHOD_MPUIO		0
@@ -303,8 +313,6 @@ struct omap3_gpio_regs {
 	u32 risingdetect;
 	u32 fallingdetect;
 	u32 dataout;
-	u32 setwkuena;
-	u32 setdataout;
 };
 
 static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
@@ -591,12 +599,16 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
 		reg += OMAP24XX_GPIO_DATAOUT;
 		break;
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_DATAOUT;
+		break;
+#endif
 	default:
 		return -EINVAL;
 	}
@@ -646,6 +658,7 @@ void omap_set_gpio_debounce(int gpio, int enable)
 		goto done;
 
 	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		bank->dbck_enable_mask = val;
 		if (enable)
 			clk_enable(bank->dbck);
 		else
@@ -724,15 +737,27 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 							 OMAP4_GPIO_IRQWAKEN0);
 			}
 		} else {
-			if (trigger != 0)
+			/*
+			 * GPIO wakeup request can only be generated on edge
+			 * transitions
+			 */
+			if (trigger & IRQ_TYPE_EDGE_BOTH)
 				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_SETWKUENA);
 			else
 				__raw_writel(1 << gpio, bank->base
 					+ OMAP24XX_GPIO_CLEARWKUENA);
 		}
-	} else {
-		if (trigger != 0)
+	}
+	/* This part needs to be executed always for OMAP34xx */
+	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+		/*
+		 * Log the edge gpio and manually trigger the IRQ
+		 * after resume if the input level changes
+		 * to avoid irq lost during PER RET/OFF mode
+		 * Applies for omap2 non-wakeup gpio and all omap3 gpios
+		 */
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
 			bank->enabled_non_wakeup_gpios |= gpio_bit;
 		else
 			bank->enabled_non_wakeup_gpios &= ~gpio_bit;
@@ -1200,11 +1225,17 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 #endif
 	if (!cpu_class_is_omap1()) {
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
-			ctrl &= 0xFFFFFFFE;
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is enabled, clocks are not gated */
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			__raw_writel(ctrl, reg);
 		}
 		bank->mod_usage |= 1 << offset;
 	}
@@ -1226,22 +1257,34 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-	if ((bank->method == METHOD_GPIO_24XX) ||
-			(bank->method == METHOD_GPIO_44XX)) {
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	if (bank->method == METHOD_GPIO_24XX) {
 		/* Disable wake-up during idle for dynamic tick */
 		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP4
+	if (bank->method == METHOD_GPIO_44XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
+		__raw_writel(1 << offset, reg);
+	}
+#endif
 	if (!cpu_class_is_omap1()) {
 		bank->mod_usage &= ~(1 << offset);
 		if (!bank->mod_usage) {
+			void __iomem *reg = bank->base;
 			u32 ctrl;
-			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+
+			if (cpu_is_omap24xx() || cpu_is_omap34xx())
+				reg += OMAP24XX_GPIO_CTRL;
+			else if (cpu_is_omap44xx())
+				reg += OMAP4_GPIO_CTRL;
+			ctrl = __raw_readl(reg);
 			/* Module is disabled, clocks are gated */
 			ctrl |= 1;
-			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+			__raw_writel(ctrl, reg);
 		}
 	}
 	_reset_gpio(bank, bank->chip.base + offset);
@@ -1570,9 +1613,14 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
-	case METHOD_GPIO_44XX:
 		reg += OMAP24XX_GPIO_OE;
 		break;
+	case METHOD_GPIO_44XX:
+		reg += OMAP4_GPIO_OE;
+		break;
+	default:
+		WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
+		return -EINVAL;
 	}
 	return __raw_readl(reg) & mask;
 }
@@ -1845,7 +1893,8 @@ static int __init _omap_gpio_init(void)
 				__raw_writel(0, bank->base +
 						OMAP24XX_GPIO_CTRL);
 			}
-			if (i < ARRAY_SIZE(non_wakeup_gpios))
+			if (cpu_is_omap24xx() &&
+			    i < ARRAY_SIZE(non_wakeup_gpios))
 				bank->non_wakeup_gpios = non_wakeup_gpios[i];
 			gpio_count = 32;
 		}
@@ -2028,16 +2077,27 @@ static struct sys_device omap_gpio_device = {
 
 static int workaround_enabled;
 
-void omap2_gpio_prepare_for_retention(void)
+void omap2_gpio_prepare_for_idle(int power_state)
 {
 	int i, c = 0;
+	int min = 0;
 
-	/* Remove triggering for all non-wakeup GPIOs.  Otherwise spurious
-	 * IRQs will be generated.  See OMAP2420 Errata item 1.101. */
-	for (i = 0; i < gpio_bank_count; i++) {
+	if (cpu_is_omap34xx())
+		min = 1;
+
+	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l1, l2;
 
+		if (bank->dbck_enable_mask)
+			clk_disable(bank->dbck);
+
+		if (power_state > PWRDM_POWER_OFF)
+			continue;
+
+		/* If going to OFF, remove triggering for all
+		 * non-wakeup GPIOs.  Otherwise spurious IRQs will be
+		 * generated.  See OMAP2420 Errata item 1.101. */
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
 
@@ -2085,16 +2145,23 @@ void omap2_gpio_prepare_for_retention(void)
 	workaround_enabled = 1;
 }
 
-void omap2_gpio_resume_after_retention(void)
+void omap2_gpio_resume_after_idle(void)
 {
 	int i;
+	int min = 0;
 
-	if (!workaround_enabled)
-		return;
-	for (i = 0; i < gpio_bank_count; i++) {
+	if (cpu_is_omap34xx())
+		min = 1;
+	for (i = min; i < gpio_bank_count; i++) {
 		struct gpio_bank *bank = &gpio_bank[i];
 		u32 l, gen, gen0, gen1;
 
+		if (bank->dbck_enable_mask)
+			clk_enable(bank->dbck);
+
+		if (!workaround_enabled)
+			continue;
+
 		if (!(bank->enabled_non_wakeup_gpios))
 			continue;
 
@@ -2119,7 +2186,7 @@ void omap2_gpio_resume_after_retention(void)
 		 * horribly racy, but it's the best we can do to work around
 		 * this silicon bug. */
 		l ^= bank->saved_datain;
-		l &= bank->non_wakeup_gpios;
+		l &= bank->enabled_non_wakeup_gpios;
 
 		/*
 		 * No need to generate IRQs for the rising edge for gpio IRQs
@@ -2207,10 +2274,6 @@ void omap_gpio_save_context(void)
 			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		gpio_context[i].dataout =
 			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
-		gpio_context[i].setwkuena =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
-		gpio_context[i].setdataout =
-			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
 	}
 }
 
@@ -2243,10 +2306,6 @@ void omap_gpio_restore_context(void)
 				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
 		__raw_writel(gpio_context[i].dataout,
 				bank->base + OMAP24XX_GPIO_DATAOUT);
-		__raw_writel(gpio_context[i].setwkuena,
-				bank->base + OMAP24XX_GPIO_SETWKUENA);
-		__raw_writel(gpio_context[i].setdataout,
-				bank->base + OMAP24XX_GPIO_SETDATAOUT);
 	}
 }
 #endif
@@ -2286,110 +2345,3 @@ static int __init omap_gpio_sysinit(void)
 }
 
 arch_initcall(omap_gpio_sysinit);
-
-
-#ifdef	CONFIG_DEBUG_FS
-
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-
-static int dbg_gpio_show(struct seq_file *s, void *unused)
-{
-	unsigned	i, j, gpio;
-
-	for (i = 0, gpio = 0; i < gpio_bank_count; i++) {
-		struct gpio_bank	*bank = gpio_bank + i;
-		unsigned		bankwidth = 16;
-		u32			mask = 1;
-
-		if (bank_is_mpuio(bank))
-			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
-			bankwidth = 32;
-
-		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
-			unsigned	irq, value, is_in, irqstat;
-			const char	*label;
-
-			label = gpiochip_is_requested(&bank->chip, j);
-			if (!label)
-				continue;
-
-			irq = bank->virtual_irq_start + j;
-			value = gpio_get_value(gpio);
-			is_in = gpio_is_input(bank, mask);
-
-			if (bank_is_mpuio(bank))
-				seq_printf(s, "MPUIO %2d ", j);
-			else
-				seq_printf(s, "GPIO %3d ", gpio);
-			seq_printf(s, "(%-20.20s): %s %s",
-					label,
-					is_in ? "in " : "out",
-					value ? "hi"  : "lo");
-
-/* FIXME for at least omap2, show pullup/pulldown state */
-
-			irqstat = irq_desc[irq].status;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-			if (is_in && ((bank->suspend_wakeup & mask)
-					|| irqstat & IRQ_TYPE_SENSE_MASK)) {
-				char	*trigger = NULL;
-
-				switch (irqstat & IRQ_TYPE_SENSE_MASK) {
-				case IRQ_TYPE_EDGE_FALLING:
-					trigger = "falling";
-					break;
-				case IRQ_TYPE_EDGE_RISING:
-					trigger = "rising";
-					break;
-				case IRQ_TYPE_EDGE_BOTH:
-					trigger = "bothedge";
-					break;
-				case IRQ_TYPE_LEVEL_LOW:
-					trigger = "low";
-					break;
-				case IRQ_TYPE_LEVEL_HIGH:
-					trigger = "high";
-					break;
-				case IRQ_TYPE_NONE:
-					trigger = "(?)";
-					break;
-				}
-				seq_printf(s, ", irq-%d %-8s%s",
-						irq, trigger,
-						(bank->suspend_wakeup & mask)
-							? " wakeup" : "");
-			}
-#endif
-			seq_printf(s, "\n");
-		}
-
-		if (bank_is_mpuio(bank)) {
-			seq_printf(s, "\n");
-			gpio = 0;
-		}
-	}
-	return 0;
-}
-
-static int dbg_gpio_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, dbg_gpio_show, &inode->i_private);
-}
-
-static const struct file_operations debug_fops = {
-	.open		= dbg_gpio_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init omap_gpio_debuginit(void)
-{
-	(void) debugfs_create_file("omap_gpio", S_IRUGO,
-					NULL, NULL, &debug_fops);
-	return 0;
-}
-late_initcall(omap_gpio_debuginit);
-#endif
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index f044b5927508..eec2b4993c69 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -38,6 +38,7 @@
 #define OMAP2_I2C_BASE1		0x48070000
 #define OMAP2_I2C_BASE2		0x48072000
 #define OMAP2_I2C_BASE3		0x48060000
+#define OMAP4_I2C_BASE4		0x48350000
 
 static const char name[] = "i2c_omap";
 
@@ -54,11 +55,14 @@ static const char name[] = "i2c_omap";
 
 static struct resource i2c_resources[][2] = {
 	{ I2C_RESOURCE_BUILDER(0, 0) },
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, INT_24XX_I2C2_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE2, 0) },
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
-	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, INT_34XX_I2C3_IRQ) },
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP2_I2C_BASE3, 0) },
+#endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	{ I2C_RESOURCE_BUILDER(OMAP4_I2C_BASE4, 0) },
 #endif
 };
 
@@ -76,12 +80,15 @@ static struct resource i2c_resources[][2] = {
 static struct omap_i2c_bus_platform_data i2c_pdata[ARRAY_SIZE(i2c_resources)];
 static struct platform_device omap_i2c_devices[] = {
 	I2C_DEV_BUILDER(1, i2c_resources[0], &i2c_pdata[0]),
-#if	defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if	defined(CONFIG_ARCH_OMAP2PLUS)
 	I2C_DEV_BUILDER(2, i2c_resources[1], &i2c_pdata[1]),
 #endif
-#if	defined(CONFIG_ARCH_OMAP3)
+#if	defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 	I2C_DEV_BUILDER(3, i2c_resources[2], &i2c_pdata[2]),
 #endif
+#if	defined(CONFIG_ARCH_OMAP4)
+	I2C_DEV_BUILDER(4, i2c_resources[3], &i2c_pdata[3]),
+#endif
 };
 
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
@@ -96,37 +103,60 @@ static int __init omap_i2c_nr_ports(void)
 		ports = 2;
 	else if (cpu_is_omap34xx())
 		ports = 3;
+	else if (cpu_is_omap44xx())
+		ports = 4;
 
 	return ports;
 }
 
-static int __init omap_i2c_add_bus(int bus_id)
+/* Shared between omap2 and 3 */
+static resource_size_t omap2_i2c_irq[3] __initdata = {
+	INT_24XX_I2C1_IRQ,
+	INT_24XX_I2C2_IRQ,
+	INT_34XX_I2C3_IRQ,
+};
+
+static resource_size_t omap4_i2c_irq[4] __initdata = {
+	OMAP44XX_IRQ_I2C1,
+	OMAP44XX_IRQ_I2C2,
+	OMAP44XX_IRQ_I2C3,
+	OMAP44XX_IRQ_I2C4,
+};
+
+static inline int omap1_i2c_add_bus(struct platform_device *pdev, int bus_id)
 {
-	struct platform_device *pdev;
 	struct omap_i2c_bus_platform_data *pd;
 	struct resource *res;
-	resource_size_t base, irq;
 
-	pdev = &omap_i2c_devices[bus_id - 1];
 	pd = pdev->dev.platform_data;
+	res = pdev->resource;
+	res[0].start = OMAP1_I2C_BASE;
+	res[0].end = res[0].start + OMAP_I2C_SIZE;
+	res[1].start = INT_I2C;
+	omap1_i2c_mux_pins(bus_id);
+
+	return platform_device_register(pdev);
+}
+
+static inline int omap2_i2c_add_bus(struct platform_device *pdev, int bus_id)
+{
+	struct resource *res;
+	resource_size_t *irq;
+
+	res = pdev->resource;
+
+	if (!cpu_is_omap44xx())
+		irq = omap2_i2c_irq;
+	else
+		irq = omap4_i2c_irq;
+
 	if (bus_id == 1) {
-		res = pdev->resource;
-		if (cpu_class_is_omap1()) {
-			base = OMAP1_I2C_BASE;
-			irq = INT_I2C;
-		} else {
-			base = OMAP2_I2C_BASE1;
-			irq = INT_24XX_I2C1_IRQ;
-		}
-		res[0].start = base;
-		res[0].end = base + OMAP_I2C_SIZE;
-		res[1].start = irq;
+		res[0].start = OMAP2_I2C_BASE1;
+		res[0].end = res[0].start + OMAP_I2C_SIZE;
 	}
 
-	if (cpu_class_is_omap1())
-		omap1_i2c_mux_pins(bus_id);
-	if (cpu_class_is_omap2())
-		omap2_i2c_mux_pins(bus_id);
+	res[1].start = irq[bus_id - 1];
+	omap2_i2c_mux_pins(bus_id);
 
 	/*
 	 * When waiting for completion of a i2c transfer, we need to
@@ -134,12 +164,28 @@ static int __init omap_i2c_add_bus(int bus_id)
 	 * ensure quick enough wakeup from idle, when transfer
 	 * completes.
 	 */
-	if (cpu_is_omap34xx())
+	if (cpu_is_omap34xx()) {
+		struct omap_i2c_bus_platform_data *pd;
+
+		pd = pdev->dev.platform_data;
 		pd->set_mpu_wkup_lat = omap_pm_set_max_mpu_wakeup_lat;
+	}
 
 	return platform_device_register(pdev);
 }
 
+static int __init omap_i2c_add_bus(int bus_id)
+{
+	struct platform_device *pdev;
+
+	pdev = &omap_i2c_devices[bus_id - 1];
+
+	if (cpu_class_is_omap1())
+		return omap1_i2c_add_bus(pdev, bus_id);
+	else
+		return omap2_i2c_add_bus(pdev, bus_id);
+}
+
 /**
  * omap_i2c_bus_setup - Process command line options for the I2C bus speed
  * @str: String of options
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 34f7fa9ad4c0..dfc472ca0cc4 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -196,15 +196,15 @@ extern struct clk dummy_ck;
 #define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */
 
 /* Clksel_rate flags */
-#define DEFAULT_RATE		(1 << 0)
-#define RATE_IN_242X		(1 << 1)
-#define RATE_IN_243X		(1 << 2)
-#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
-#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
-#define RATE_IN_36XX		(1 << 5)
-#define RATE_IN_4430		(1 << 6)
+#define RATE_IN_242X		(1 << 0)
+#define RATE_IN_243X		(1 << 1)
+#define RATE_IN_3XXX		(1 << 2)	/* rates common to all OMAP3 */
+#define RATE_IN_3430ES2		(1 << 3)	/* 3430ES2 rates only */
+#define RATE_IN_36XX		(1 << 4)
+#define RATE_IN_4430		(1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
+#define RATE_IN_3430ES2PLUS	(RATE_IN_3430ES2 | RATE_IN_36XX)
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 7556e271942e..d265018f5e6b 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -31,9 +31,6 @@
 
 struct sys_timer;
 
-/* used by omap-smp.c and board-4430sdp.c */
-extern void __iomem *gic_cpu_base_addr;
-
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
 
diff --git a/arch/arm/plat-omap/include/plat/control.h b/arch/arm/plat-omap/include/plat/control.h
index a56deee97676..131bf405c2f6 100644
--- a/arch/arm/plat-omap/include/plat/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -207,6 +207,9 @@
 /* 44xx control status register offset */
 #define OMAP44XX_CONTROL_STATUS		0x2c4
 
+/* 44xx-only CONTROL_GENERAL register offsets */
+#define OMAP44XX_CONTROL_MMC1			0x628
+#define OMAP44XX_CONTROL_PBIAS_LITE		0x600
 /*
  * REVISIT: This list of registers is not comprehensive - there are more
  * that should be added.
@@ -252,6 +255,23 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PBIAS_LITE bits for OMAP4 */
+#define OMAP4_MMC1_PWRDNZ			(1 << 26)
+#define OMAP4_MMC1_PBIASLITE_HIZ_MODE		(1 << 25)
+#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT	(1 << 24)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR	(1 << 23)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ		(1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE		(1 << 21)
+#define OMAP4_USBC1_ICUSB_PWRDNZ		(1 << 20)
+
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP0	(1 << 31)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP1	(1 << 30)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP2	(1 << 29)
+#define OMAP4_CONTROL_SDMMC1_PUSTRENGTHGRP3	(1 << 28)
+#define OMAP4_CONTROL_SDMMC1_DR0_SPEEDCTRL	(1 << 27)
+#define OMAP4_CONTROL_SDMMC1_DR1_SPEEDCTRL	(1 << 26)
+#define OMAP4_CONTROL_SDMMC1_DR2_SPEEDCTRL	(1 << 25)
+
 /* CONTROL_PROG_IO1 bits */
 #define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
 
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index de7c54731cbe..de1c604962eb 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -72,8 +72,8 @@
 				 IH_GPIO_BASE + (nr))
 
 extern int omap_gpio_init(void);	/* Call from board init only */
-extern void omap2_gpio_prepare_for_retention(void);
-extern void omap2_gpio_resume_after_retention(void);
+extern void omap2_gpio_prepare_for_idle(int power_state);
+extern void omap2_gpio_resume_after_idle(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
 extern void omap_gpio_save_context(void);
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 401701977dbb..c01d9f08a198 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -428,4 +428,8 @@ void omap3_intc_resume_idle(void);
 
 #include <mach/hardware.h>
 
+#ifdef CONFIG_FIQ
+#define FIQ_START		1024
+#endif
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index a1bac07c89eb..c835f1e994c6 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -102,6 +102,10 @@ struct omap_mmc_platform_data {
 		/* Regulator off remapped to sleep */
 		unsigned vcc_aux_disable_is_sleep:1;
 
+		/* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS		(1 << 0)
+		unsigned features;
+
 		int switch_pin;			/* gpio (card detect) */
 		int gpio_wp;			/* gpio (write protect) */
 
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index f235d32cd942..ffd909fa5287 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -61,9 +61,9 @@
 #  define OMAP_NAME omap16xx
 # endif
 #endif
-#if (defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3))
+#ifdef CONFIG_ARCH_OMAP2PLUS
 # if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
-#  error "OMAP1 and OMAP2 can't be selected at the same time"
+#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
 # endif
 #endif
 #ifdef CONFIG_ARCH_OMAP2420
@@ -82,12 +82,20 @@
 #  define OMAP_NAME omap2430
 # endif
 #endif
-#ifdef CONFIG_ARCH_OMAP3430
+#ifdef CONFIG_ARCH_OMAP3
 # ifdef OMAP_NAME
 #  undef  MULTI_OMAP2
 #  define MULTI_OMAP2
 # else
-#  define OMAP_NAME omap3430
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
 # endif
 #endif
 
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index b3ef1a7f53cc..8b3f12ff5cbc 100644
--- a/arch/arm/plat-omap/include/plat/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -30,6 +30,7 @@
 #define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
 #define OMAP4430_CM2_BASE		0x4a008000
 #define OMAP4430_PRM_BASE		0x4a306000
+#define OMAP4430_PRCM_MPU_BASE		0x48243000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
 #define OMAP443X_CTRL_BASE		0x4a100000
@@ -48,5 +49,8 @@
 #define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
 #define OMAP44XX_HSUSB_OTG_BASE		(L4_44XX_BASE + 0xAB000)
 
+#define OMAP4_MMU1_BASE			0x55082000
+#define OMAP4_MMU2_BASE			0x4A066000
+
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 36d6ea56ab51..0eccc09ac4a9 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -176,9 +176,8 @@ struct omap_hwmod_addr_space {
 #define OCP_USER_SDMA			(1 << 1)
 
 /* omap_hwmod_ocp_if.flags bits */
-#define OCPIF_HAS_IDLEST		(1 << 0)
-#define OCPIF_SWSUP_IDLE		(1 << 1)
-#define OCPIF_CAN_BURST			(1 << 2)
+#define OCPIF_SWSUP_IDLE		(1 << 0)
+#define OCPIF_CAN_BURST			(1 << 1)
 
 /**
  * struct omap_hwmod_ocp_if - OCP interface data
@@ -327,14 +326,12 @@ struct omap_hwmod_omap2_prcm {
 
 /**
  * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
- * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2
- * @device_offs: device register offset from @module_offs
+ * @clkctrl_reg: PRCM address of the clock control register
  * @submodule_wkdep_bit: bit shift of the WKDEP range
  */
 struct omap_hwmod_omap4_prcm {
-	u32 module_offs;
-	u16 device_offs;
-	u8 submodule_wkdep_bit;
+	void __iomem	*clkctrl_reg;
+	u8		submodule_wkdep_bit;
 };
 
 
@@ -353,6 +350,8 @@ struct omap_hwmod_omap4_prcm {
  *     when module is enabled, rather than the default, which is to
  *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST : this module does not have idle status - this is the case
+ *     only for few initiator modules on OMAP2 & 3.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -360,6 +359,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
 #define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
 #define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
+#define HWMOD_NO_IDLEST				(1 << 6)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index d82b2c00d4f1..fb6ec74fe39e 100644
--- a/arch/arm/plat-omap/include/plat/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -31,6 +31,7 @@
 #define PWRDM_MAX_PWRSTS	4
 
 /* Powerdomain allowable state bitfields */
+#define PWRSTS_ON		(1 << PWRDM_POWER_ON)
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
 
@@ -49,6 +50,12 @@
 					  * in MEM bank 1 position. This is
 					  * true for OMAP3430
 					  */
+#define PWRDM_HAS_LOWPOWERSTATECHANGE	(1 << 2) /*
+						  * support to transition from a
+						  * sleep state to a lower sleep
+						  * state without waking up the
+						  * powerdomain
+						  */
 
 /*
  * Number of memory banks that are power-controllable.	On OMAP4430, the
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 83dce4c4f7e6..19145f5c32ba 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -15,6 +15,20 @@
 
 #include <linux/init.h>
 
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO		(PHYS_OFFSET + 0x3ffc)
+
 /* OMAP1 serial ports */
 #define OMAP1_UART1_BASE	0xfffb0000
 #define OMAP1_UART2_BASE	0xfffb0800
@@ -39,7 +53,7 @@
 
 /* External port on Zoom2/3 */
 #define ZOOM_UART_BASE		0x10000000
-#define ZOOM_UART_VIRT		0xfb000000
+#define ZOOM_UART_VIRT		0xfa400000
 
 #define OMAP_PORT_SHIFT		2
 #define OMAP7XX_PORT_SHIFT	0
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 81d9ec540fcf..bbedd71943f6 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -20,27 +20,21 @@
 #include <linux/types.h>
 #include <linux/serial_reg.h>
 
+#include <asm/memory.h>
 #include <asm/mach-types.h>
 
 #include <plat/serial.h>
 
-static volatile u8 *uart1_base;
-static int uart1_shift;
-
 static volatile u8 *uart_base;
 static int uart_shift;
 
 /*
- * Store the DEBUG_LL uart number into UART1 scratchpad register.
+ * Store the DEBUG_LL uart number into memory.
  * See also debug-macro.S, and serial.c for related code.
- *
- * Please note that we currently assume that:
- * - UART1 clocks are enabled for register access
- * - UART1 scratchpad register can be used
  */
-static void set_uart1_scratchpad(unsigned char port)
+static void set_omap_uart_info(unsigned char port)
 {
-	uart1_base[UART_SCR << uart1_shift] = port;
+	*(volatile u32 *)OMAP_UART_INFO = port;
 }
 
 static void putc(int c)
@@ -60,42 +54,38 @@ static inline void flush(void)
 /*
  * Macros to configure UART1 and debug UART
  */
-#define _DEBUG_LL_ENTRY(mach, uart1_phys, uart1_shft,			\
-			dbg_uart, dbg_shft, dbg_id)			\
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)		\
 	if (machine_is_##mach()) {					\
-		uart1_base = (volatile u8 *)(uart1_phys);		\
-		uart1_shift = (uart1_shft);				\
 		uart_base = (volatile u8 *)(dbg_uart);			\
 		uart_shift = (dbg_shft);				\
 		port = (dbg_id);					\
-		set_uart1_scratchpad(port);				\
+		set_omap_uart_info(port);				\
 		break;							\
 	}
 
 #define DEBUG_LL_OMAP7XX(p, mach)					\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP7XX_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP1(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP1_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP1UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP1UART##p)
 
 #define DEBUG_LL_OMAP2(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP2UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP2UART##p)
 
 #define DEBUG_LL_OMAP3(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP3_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP3UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP3UART##p)
 
 #define DEBUG_LL_OMAP4(p, mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP4_UART1_BASE, OMAP_PORT_SHIFT,	\
-		OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT, OMAP4UART##p)
+	_DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,	\
+		OMAP4UART##p)
 
 /* Zoom2/3 shift is different for UART1 and external port */
 #define DEBUG_LL_ZOOM(mach)						\
-	_DEBUG_LL_ENTRY(mach, OMAP2_UART1_BASE, OMAP_PORT_SHIFT,	\
-		ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+	_DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
 
 static inline void __arch_decomp_setup(unsigned long arch_id)
 {
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 0e137663349c..bc094dbacee6 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -25,6 +25,11 @@
 
 #include "iopgtable.h"
 
+#define for_each_iotlb_cr(obj, n, __i, cr)				\
+	for (__i = 0;							\
+	     (__i < (n)) && (cr = __iotlb_read_cr((obj), __i), true);	\
+	     __i++)
+
 /* accommodate the difference between omap1 and omap2/3 */
 static const struct iommu_functions *arch_iommu;
 
@@ -172,15 +177,12 @@ static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
 	l->base = MMU_LOCK_BASE(val);
 	l->vict = MMU_LOCK_VICT(val);
 
-	BUG_ON(l->base != 0); /* Currently no preservation is used */
 }
 
 static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
 {
 	u32 val;
 
-	BUG_ON(l->base != 0); /* Currently no preservation is used */
-
 	val = (l->base << MMU_LOCK_BASE_SHIFT);
 	val |= (l->vict << MMU_LOCK_VICT_SHIFT);
 
@@ -214,6 +216,20 @@ static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
 	return arch_iommu->dump_cr(obj, cr, buf);
 }
 
+/* only used in iotlb iteration for-loop */
+static struct cr_regs __iotlb_read_cr(struct iommu *obj, int n)
+{
+	struct cr_regs cr;
+	struct iotlb_lock l;
+
+	iotlb_lock_get(obj, &l);
+	l.vict = n;
+	iotlb_lock_set(obj, &l);
+	iotlb_read_cr(obj, &cr);
+
+	return cr;
+}
+
 /**
  * load_iotlb_entry - Set an iommu tlb entry
  * @obj:	target iommu
@@ -221,7 +237,6 @@ static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
  **/
 int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 {
-	int i;
 	int err = 0;
 	struct iotlb_lock l;
 	struct cr_regs *cr;
@@ -231,21 +246,30 @@ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 
 	clk_enable(obj->clk);
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
+	iotlb_lock_get(obj, &l);
+	if (l.base == obj->nr_tlb_entries) {
+		dev_warn(obj->dev, "%s: preserve entries full\n", __func__);
+		err = -EBUSY;
+		goto out;
+	}
+	if (!e->prsvd) {
+		int i;
 		struct cr_regs tmp;
 
+		for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, tmp)
+			if (!iotlb_cr_valid(&tmp))
+				break;
+
+		if (i == obj->nr_tlb_entries) {
+			dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+			err = -EBUSY;
+			goto out;
+		}
+
 		iotlb_lock_get(obj, &l);
-		l.vict = i;
+	} else {
+		l.vict = l.base;
 		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &tmp);
-		if (!iotlb_cr_valid(&tmp))
-			break;
-	}
-
-	if (i == obj->nr_tlb_entries) {
-		dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
-		err = -EBUSY;
-		goto out;
 	}
 
 	cr = iotlb_alloc_cr(obj, e);
@@ -257,9 +281,11 @@ int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
 	iotlb_load_cr(obj, cr);
 	kfree(cr);
 
+	if (e->prsvd)
+		l.base++;
 	/* increment victim for next tlb load */
 	if (++l.vict == obj->nr_tlb_entries)
-		l.vict = 0;
+		l.vict = l.base;
 	iotlb_lock_set(obj, &l);
 out:
 	clk_disable(obj->clk);
@@ -276,20 +302,15 @@ EXPORT_SYMBOL_GPL(load_iotlb_entry);
  **/
 void flush_iotlb_page(struct iommu *obj, u32 da)
 {
-	struct iotlb_lock l;
 	int i;
+	struct cr_regs cr;
 
 	clk_enable(obj->clk);
 
-	for (i = 0; i < obj->nr_tlb_entries; i++) {
-		struct cr_regs cr;
+	for_each_iotlb_cr(obj, obj->nr_tlb_entries, i, cr) {
 		u32 start;
 		size_t bytes;
 
-		iotlb_lock_get(obj, &l);
-		l.vict = i;
-		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &cr);
 		if (!iotlb_cr_valid(&cr))
 			continue;
 
@@ -299,7 +320,6 @@ void flush_iotlb_page(struct iommu *obj, u32 da)
 		if ((start <= da) && (da < start + bytes)) {
 			dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
 				__func__, start, da, bytes);
-			iotlb_load_cr(obj, &cr);
 			iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
 		}
 	}
@@ -370,26 +390,19 @@ EXPORT_SYMBOL_GPL(iommu_dump_ctx);
 static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs, int num)
 {
 	int i;
-	struct iotlb_lock saved, l;
+	struct iotlb_lock saved;
+	struct cr_regs tmp;
 	struct cr_regs *p = crs;
 
 	clk_enable(obj->clk);
-
 	iotlb_lock_get(obj, &saved);
-	memcpy(&l, &saved, sizeof(saved));
 
-	for (i = 0; i < num; i++) {
-		struct cr_regs tmp;
-
-		iotlb_lock_get(obj, &l);
-		l.vict = i;
-		iotlb_lock_set(obj, &l);
-		iotlb_read_cr(obj, &tmp);
+	for_each_iotlb_cr(obj, num, i, tmp) {
 		if (!iotlb_cr_valid(&tmp))
 			continue;
-
 		*p++ = tmp;
 	}
+
 	iotlb_lock_set(obj, &saved);
 	clk_disable(obj->clk);
 
@@ -503,6 +516,12 @@ static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
 {
 	u32 *iopgd = iopgd_offset(obj, da);
 
+	if ((da | pa) & ~IOSECTION_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOSECTION_SIZE);
+		return -EINVAL;
+	}
+
 	*iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
 	flush_iopgd_range(iopgd, iopgd);
 	return 0;
@@ -513,6 +532,12 @@ static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
 	u32 *iopgd = iopgd_offset(obj, da);
 	int i;
 
+	if ((da | pa) & ~IOSUPER_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOSUPER_SIZE);
+		return -EINVAL;
+	}
+
 	for (i = 0; i < 16; i++)
 		*(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
 	flush_iopgd_range(iopgd, iopgd + 15);
@@ -542,6 +567,12 @@ static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
 	u32 *iopte = iopte_alloc(obj, iopgd, da);
 	int i;
 
+	if ((da | pa) & ~IOLARGE_MASK) {
+		dev_err(obj->dev, "%s: %08x:%08x should aligned on %08lx\n",
+			__func__, da, pa, IOLARGE_SIZE);
+		return -EINVAL;
+	}
+
 	if (IS_ERR(iopte))
 		return PTR_ERR(iopte);
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 65c6d1ff7237..e43983ba59c5 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -287,16 +287,19 @@ static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
 	prev_end = 0;
 	list_for_each_entry(tmp, &obj->mmap, list) {
 
-		if ((prev_end <= start) && (start + bytes < tmp->da_start))
+		if (prev_end >= start)
+			break;
+
+		if (start + bytes < tmp->da_start)
 			goto found;
 
 		if (flags & IOVMF_DA_ANON)
-			start = roundup(tmp->da_end, alignement);
+			start = roundup(tmp->da_end + 1, alignement);
 
 		prev_end = tmp->da_end;
 	}
 
-	if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+	if ((start > prev_end) && (ULONG_MAX - start >= bytes))
 		goto found;
 
 	dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 0f5197479513..f899603051ac 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -2,10 +2,10 @@
  * omap_device implementation
  *
  * Copyright (C) 2009 Nokia Corporation
- * Paul Walmsley
+ * Paul Walmsley, Kevin Hilman
  *
  * Developed in collaboration with (alphabetical order): Benoit
- * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Cousson, Thara Gopinath, Tony Lindgren, Rajendra Nayak, Vikram
  * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
  * Woodruff
  *
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 51f4dfb82e2b..226b2e858d6c 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -437,6 +437,20 @@ static inline int omap34xx_sram_init(void)
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP4
+int __init omap44xx_sram_init(void)
+{
+	printk(KERN_ERR "FIXME: %s not implemented\n", __func__);
+
+	return -ENODEV;
+}
+#else
+static inline int omap44xx_sram_init(void)
+{
+	return 0;
+}
+#endif
+
 int __init omap_sram_init(void)
 {
 	omap_detect_sram();
@@ -451,7 +465,7 @@ int __init omap_sram_init(void)
 	else if (cpu_is_omap34xx())
 		omap34xx_sram_init();
 	else if (cpu_is_omap44xx())
-		omap34xx_sram_init(); /* FIXME: */
+		omap44xx_sram_init();
 
 	return 0;
 }