Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - nommu updates from Afzal Mohammed cleaning up the vectors support

 - allow DMA memory "mapping" for nommu Benjamin Gaignard

 - fixing a correctness issue with R_ARM_PREL31 relocations in the
   module linker

 - add strlen() prototype for the decompressor

 - support for DEBUG_VIRTUAL from Florian Fainelli

 - adjusting memory bounds after memory reservations have been
   registered

 - unipher cache handling updates from Masahiro Yamada

 - initrd and Thumb Kconfig cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (23 commits)
  ARM: mm: round the initrd reservation to page boundaries
  ARM: mm: clean up initrd initialisation
  ARM: mm: move initrd init code out of arm_memblock_init()
  ARM: 8655/1: improve NOMMU definition of pgprot_*()
  ARM: 8654/1: decompressor: add strlen prototype
  ARM: 8652/1: cache-uniphier: clean up active way setup code
  ARM: 8651/1: cache-uniphier: include <linux/errno.h> instead of <linux/types.h>
  ARM: 8650/1: module: handle negative R_ARM_PREL31 addends correctly
  ARM: 8649/2: nommu: remove Hivecs configuration is asm
  ARM: 8648/2: nommu: display vectors base
  ARM: 8647/2: nommu: dynamic exception base address setting
  ARM: 8646/1: mmu: decouple VECTORS_BASE from Kconfig
  ARM: 8644/1: Reduce "CPU: shutdown" message to debug level
  ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol
  ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL
  ARM: 8639/1: Define KERNEL_START and KERNEL_END
  ARM: 8638/1: mtd: lart: Rename partition defines to be prefixed with PART_
  ARM: 8637/1: Adjust memory boundaries after reservations
  ARM: 8636/1: Cleanup sanity_check_meminfo
  ARM: add CPU_THUMB_CAPABLE to indicate possible Thumb support
  ...

1 files changed, 26 insertions, 5 deletions

diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 35e3a56e5d86..c6c4c9c8824b 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -29,6 +29,7 @@ config CPU_ARM720T
 	select CPU_COPY_V4WT if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WT if MMU
 	help
 	  A 32-bit RISC processor with 8kByte Cache, Write Buffer and
@@ -46,6 +47,7 @@ config CPU_ARM740T
 	select CPU_CACHE_V4
 	select CPU_CP15_MPU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	help
 	  A 32-bit RISC processor with 8KB cache or 4KB variants,
 	  write buffer and MPU(Protection Unit) built around
@@ -79,6 +81,7 @@ config CPU_ARM920T
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
@@ -97,6 +100,7 @@ config CPU_ARM922T
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM922T is a version of the ARM920T, but with smaller
@@ -116,6 +120,7 @@ config CPU_ARM925T
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
  	help
  	  The ARM925T is a mix between the ARM920T and ARM926T, but with
@@ -134,6 +139,7 @@ config CPU_ARM926T
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	help
 	  This is a variant of the ARM920.  It has slightly different
@@ -170,6 +176,7 @@ config CPU_ARM940T
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	help
 	  ARM940T is a member of the ARM9TDMI family of general-
 	  purpose microprocessors with MPU and separate 4KB
@@ -188,6 +195,7 @@ config CPU_ARM946E
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	help
 	  ARM946E-S is a member of the ARM9E-S family of high-
 	  performance, 32-bit system-on-chip processor solutions.
@@ -206,6 +214,7 @@ config CPU_ARM1020
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1020 is the 32K cached version of the ARM10 processor,
@@ -225,6 +234,7 @@ config CPU_ARM1020E
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 
 # ARM1022E
@@ -236,6 +246,7 @@ config CPU_ARM1022
 	select CPU_COPY_V4WB if MMU # can probably do better
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1022E is an implementation of the ARMv5TE architecture
@@ -254,6 +265,7 @@ config CPU_ARM1026
 	select CPU_COPY_V4WB if MMU # can probably do better
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
@@ -302,6 +314,7 @@ config CPU_XSCALE
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 
 # XScale Core Version 3
@@ -312,6 +325,7 @@ config CPU_XSC3
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
@@ -324,6 +338,7 @@ config CPU_MOHAWK
 	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V4WBI if MMU
 
 # Feroceon
@@ -335,6 +350,7 @@ config CPU_FEROCEON
 	select CPU_COPY_FEROCEON if MMU
 	select CPU_CP15_MMU
 	select CPU_PABRT_LEGACY
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_FEROCEON if MMU
 
 config CPU_FEROCEON_OLD_ID
@@ -367,6 +383,7 @@ config CPU_V6
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
 	select CPU_PABRT_V6
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V6 if MMU
 
 # ARMv6k
@@ -381,6 +398,7 @@ config CPU_V6K
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
 	select CPU_PABRT_V6
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V6 if MMU
 
 # ARMv7
@@ -396,6 +414,7 @@ config CPU_V7
 	select CPU_CP15_MPU if !MMU
 	select CPU_HAS_ASID if MMU
 	select CPU_PABRT_V7
+	select CPU_THUMB_CAPABLE
 	select CPU_TLB_V7 if MMU
 
 # ARMv7M
@@ -410,11 +429,17 @@ config CPU_V7M
 
 config CPU_THUMBONLY
 	bool
+	select CPU_THUMB_CAPABLE
 	# There are no CPUs available with MMU that don't implement an ARM ISA:
 	depends on !MMU
 	help
 	  Select this if your CPU doesn't support the 32 bit ARM instructions.
 
+config CPU_THUMB_CAPABLE
+	bool
+	help
+	  Select this if your CPU can support Thumb mode.
+
 # Figure out what processor architecture version we should be using.
 # This defines the compiler instruction set which depends on the machine type.
 config CPU_32v3
@@ -655,11 +680,7 @@ config ARCH_DMA_ADDR_T_64BIT
 
 config ARM_THUMB
 	bool "Support Thumb user binaries" if !CPU_THUMBONLY
-	depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || \
-		CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || \
-		CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
-		CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || \
-		CPU_V7 || CPU_FEROCEON || CPU_V7M
+	depends on CPU_THUMB_CAPABLE
 	default y
 	help
 	  Say Y if you want to include kernel support for running user space