ARM: sa1100: remove unused board files

The Cerf, H3100, Badge4, Hackkit, LART, NanoEngine, PLEB, Shannon and
Simpad machines were all marked as unused as there are no known users
left. Remove all of these, along with references to them in defconfig
files and drivers.

Four machines remain now: Assabet, Collie (Zaurus SL5500), iPAQ H3600
and Jornada 720, each of which had one person still using them, with
Collie also being supported in Qemu.

Cc: Peter Chubb <peter.chubb@unsw.edu.au>
Cc: Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 136 deletions

diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
deleted file mode 100644
index f6c9c19c39fb..000000000000
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * linux/arch/arm/mach-sa1100/nanoengine.c
- *
- * Bright Star Engineering's nanoEngine board init code.
- *
- * Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
- */
-
-#include <linux/init.h>
-#include <linux/gpio/machine.h>
-#include <linux/kernel.h>
-#include <linux/platform_data/sa11x0-serial.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/root_dev.h>
-
-#include <asm/mach-types.h>
-#include <asm/setup.h>
-#include <asm/page.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/nanoengine.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-
-/* Flash bank 0 */
-static struct mtd_partition nanoengine_partitions[] = {
-	{
-		.name	= "nanoEngine boot firmware and parameter table",
-		.size		= 0x00010000,  /* 32K */
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "kernel/initrd reserved",
-		.size		= 0x002f0000,
-		.offset		= 0x00010000,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "experimental filesystem allocation",
-		.size		= 0x00100000,
-		.offset		= 0x00300000,
-		.mask_flags	= MTD_WRITEABLE,
-	}
-};
-
-static struct flash_platform_data nanoengine_flash_data = {
-	.map_name	= "jedec_probe",
-	.parts		= nanoengine_partitions,
-	.nr_parts	= ARRAY_SIZE(nanoengine_partitions),
-};
-
-static struct resource nanoengine_flash_resources[] = {
-	DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M),
-	DEFINE_RES_MEM(SA1100_CS1_PHYS, SZ_32M),
-};
-
-static struct map_desc nanoengine_io_desc[] __initdata = {
-	{
-		/* System Registers */
-		.virtual	= 0xf0000000,
-		.pfn		= __phys_to_pfn(0x10000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Memory Read/Write */
-		.virtual	= NANO_PCI_MEM_RW_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
-		.length		= NANO_PCI_MEM_RW_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		/* Internal PCI Config Space */
-		.virtual	= NANO_PCI_CONFIG_SPACE_VIRT,
-		.pfn		= __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
-		.length		= NANO_PCI_CONFIG_SPACE_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-
-static void __init nanoengine_map_io(void)
-{
-	sa1100_map_io();
-	iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
-
-	sa1100_register_uart(0, 1);
-	sa1100_register_uart(1, 2);
-	sa1100_register_uart(2, 3);
-	Ser1SDCR0 |= SDCR0_UART;
-	/* disable IRDA -- UART2 is used as a normal serial port */
-	Ser2UTCR4 = 0;
-	Ser2HSCR0 = 0;
-}
-
-static struct gpiod_lookup_table nanoengine_pcmcia0_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.0",
-	.table = {
-		GPIO_LOOKUP("gpio", 11, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 13, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 15, "reset", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct gpiod_lookup_table nanoengine_pcmcia1_gpio_table = {
-	.dev_id = "sa11x0-pcmcia.1",
-	.table = {
-		GPIO_LOOKUP("gpio", 12, "ready", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio", 14, "detect", GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP("gpio", 16, "reset", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static void __init nanoengine_init(void)
-{
-	sa11x0_register_pcmcia(0, &nanoengine_pcmcia0_gpio_table);
-	sa11x0_register_pcmcia(1, &nanoengine_pcmcia1_gpio_table);
-	sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
-		ARRAY_SIZE(nanoengine_flash_resources));
-}
-
-MACHINE_START(NANOENGINE, "BSE nanoEngine")
-	.atag_offset	= 0x100,
-	.map_io		= nanoengine_map_io,
-	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
-	.init_time	= sa1100_timer_init,
-	.init_machine	= nanoengine_init,
-	.init_late	= sa11x0_init_late,
-	.restart	= sa11x0_restart,
-MACHINE_END