Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (237 commits)
  ARM: 7004/1: fix traps.h compile warnings
  ARM: 6998/2: kernel: use proper memory barriers for bitops
  ARM: 6997/1: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM
  ARM: Fix build errors caused by adding generic macros
  ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU
  ARM: CPU hotplug: pass in proper affinity mask on IRQ migration
  ARM: GIC: avoid routing interrupts to offline CPUs
  ARM: CPU hotplug: fix abuse of irqdesc->node
  ARM: 6981/2: mmci: adjust calculation of f_min
  ARM: 7000/1: LPAE: Use long long printk format for displaying the pud
  ARM: 6999/1: head, zImage: Always Enter the kernel in ARM state
  ARM: btc: avoid invalidating the branch target cache on kernel TLB maintanence
  ARM: ARM_DMA_ZONE_SIZE is no more
  ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size
  ...

7 files changed, 249 insertions, 395 deletions

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index da53ba3917ca..aab884fecc55 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -286,14 +286,15 @@ void omap3_save_scratchpad_contents(void)
 	scratchpad_contents.boot_config_ptr = 0x0;
 	if (cpu_is_omap3630())
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(get_omap3630_restore_pointer());
+			virt_to_phys(omap3_restore_3630);
 	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
 					omap_rev() != OMAP3430_REV_ES3_1)
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(get_restore_pointer());
+			virt_to_phys(omap3_restore);
 	else
 		scratchpad_contents.public_restore_ptr =
-			virt_to_phys(get_es3_restore_pointer());
+			virt_to_phys(omap3_restore_es3);
+
 	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
 		scratchpad_contents.secure_ram_restore_ptr = 0x0;
 	else
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a016c8b59e00..d4ef75d5a382 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -386,9 +386,9 @@ extern void omap4_ctrl_pad_writel(u32 val, u16 offset);
 
 extern void omap3_save_scratchpad_contents(void);
 extern void omap3_clear_scratchpad_contents(void);
-extern u32 *get_restore_pointer(void);
-extern u32 *get_es3_restore_pointer(void);
-extern u32 *get_omap3630_restore_pointer(void);
+extern void omap3_restore(void);
+extern void omap3_restore_es3(void);
+extern void omap3_restore_3630(void);
 extern u32 omap3_arm_context[128];
 extern void omap3_control_save_context(void);
 extern void omap3_control_restore_context(void);
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index a48690b90990..ceb8b7e593d7 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -165,6 +165,3 @@
 #endif
 
 #endif	/* MULTI_OMAP2 */
-
-		.macro	irq_prio_table
-		.endm
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index ecfe93c4b585..ce65e9329c7b 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -125,14 +125,6 @@ void __init smp_init_cpus(void)
 
 void __init platform_smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
-	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
-	 */
-	for (i = 0; i < max_cpus; i++)
-		set_cpu_present(i, true);
 
 	/*
 	 * Initialise the SCU and wake up the secondary core using
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 45bcfce77352..04ee56646126 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -88,18 +88,28 @@ extern int pm_dbg_regset_init(int reg_set);
 #define pm_dbg_regset_init(reg_set) do {} while (0);
 #endif /* CONFIG_PM_DEBUG */
 
+/* 24xx */
 extern void omap24xx_idle_loop_suspend(void);
+extern unsigned int omap24xx_idle_loop_suspend_sz;
 
 extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
-extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern int save_secure_ram_context(u32 *addr);
-extern void omap3_save_scratchpad_contents(void);
+extern unsigned int omap24xx_cpu_suspend_sz;
 
-extern unsigned int omap24xx_idle_loop_suspend_sz;
+/* 3xxx */
+extern void omap34xx_cpu_suspend(int save_state);
+
+/* omap3_do_wfi function pointer and size, for copy to SRAM */
+extern void omap3_do_wfi(void);
+extern unsigned int omap3_do_wfi_sz;
+/* ... and its pointer from SRAM after copy */
+extern void (*omap3_do_wfi_sram)(void);
+
+/* save_secure_ram_context function pointer and size, for copy to SRAM */
+extern int save_secure_ram_context(u32 *addr);
 extern unsigned int save_secure_ram_context_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap34xx_cpu_suspend_sz;
+
+extern void omap3_save_scratchpad_contents(void);
 
 #define PM_RTA_ERRATUM_i608		(1 << 0)
 #define PM_SDRC_WAKEUP_ERRATUM_i583	(1 << 1)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c155c9d1c82c..b77d82665abb 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -31,6 +31,8 @@
 #include <linux/console.h>
 #include <trace/events/power.h>
 
+#include <asm/suspend.h>
+
 #include <plat/sram.h>
 #include "clockdomain.h"
 #include "powerdomain.h"
@@ -40,8 +42,6 @@
 #include <plat/gpmc.h>
 #include <plat/dma.h>
 
-#include <asm/tlbflush.h>
-
 #include "cm2xxx_3xxx.h"
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
@@ -64,11 +64,6 @@ static inline bool is_suspending(void)
 }
 #endif
 
-/* Scratchpad offsets */
-#define OMAP343X_TABLE_ADDRESS_OFFSET	   0xc4
-#define OMAP343X_TABLE_VALUE_OFFSET	   0xc0
-#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0xc8
-
 /* pm34xx errata defined in pm.h */
 u16 pm34xx_errata;
 
@@ -83,9 +78,8 @@ struct power_state {
 
 static LIST_HEAD(pwrst_list);
 
-static void (*_omap_sram_idle)(u32 *addr, int save_state);
-
 static int (*_omap_save_secure_sram)(u32 *addr);
+void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
@@ -312,28 +306,25 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Function to restore the table entry that was modified for enabling MMU */
-static void restore_table_entry(void)
+static void omap34xx_save_context(u32 *save)
 {
-	void __iomem *scratchpad_address;
-	u32 previous_value, control_reg_value;
-	u32 *address;
+	u32 val;
 
-	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+	/* Read Auxiliary Control Register */
+	asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val));
+	*save++ = 1;
+	*save++ = val;
 
-	/* Get address of entry that was modified */
-	address = (u32 *)__raw_readl(scratchpad_address +
-				     OMAP343X_TABLE_ADDRESS_OFFSET);
-	/* Get the previous value which needs to be restored */
-	previous_value = __raw_readl(scratchpad_address +
-				     OMAP343X_TABLE_VALUE_OFFSET);
-	address = __va(address);
-	*address = previous_value;
-	flush_tlb_all();
-	control_reg_value = __raw_readl(scratchpad_address
-					+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
-	/* This will enable caches and prediction */
-	set_cr(control_reg_value);
+	/* Read L2 AUX ctrl register */
+	asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
+	*save++ = 1;
+	*save++ = val;
+}
+
+static int omap34xx_do_sram_idle(unsigned long save_state)
+{
+	omap34xx_cpu_suspend(save_state);
+	return 0;
 }
 
 void omap_sram_idle(void)
@@ -352,9 +343,6 @@ void omap_sram_idle(void)
 	int core_prev_state, per_prev_state;
 	u32 sdrc_pwr = 0;
 
-	if (!_omap_sram_idle)
-		return;
-
 	pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
 	pwrdm_clear_all_prev_pwrst(neon_pwrdm);
 	pwrdm_clear_all_prev_pwrst(core_pwrdm);
@@ -432,12 +420,16 @@ void omap_sram_idle(void)
 		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 
 	/*
-	 * omap3_arm_context is the location where ARM registers
-	 * get saved. The restore path then reads from this
-	 * location and restores them back.
+	 * omap3_arm_context is the location where some ARM context
+	 * get saved. The rest is placed on the stack, and restored
+	 * from there before resuming.
 	 */
-	_omap_sram_idle(omap3_arm_context, save_state);
-	cpu_init();
+	if (save_state)
+		omap34xx_save_context(omap3_arm_context);
+	if (save_state == 1 || save_state == 3)
+		cpu_suspend(save_state, omap34xx_do_sram_idle);
+	else
+		omap34xx_do_sram_idle(save_state);
 
 	/* Restore normal SDRC POWER settings */
 	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
@@ -445,10 +437,6 @@ void omap_sram_idle(void)
 	    core_next_state == PWRDM_POWER_OFF)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
-	/* Restore table entry modified during MMU restoration */
-	if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
-		restore_table_entry();
-
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
 		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
@@ -852,10 +840,17 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 	return 0;
 }
 
+/*
+ * Push functions to SRAM
+ *
+ * The minimum set of functions is pushed to SRAM for execution:
+ * - omap3_do_wfi for erratum i581 WA,
+ * - save_secure_ram_context for security extensions.
+ */
 void omap_push_sram_idle(void)
 {
-	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
-					omap34xx_cpu_suspend_sz);
+	omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
+
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
 		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
 				save_secure_ram_context_sz);
@@ -920,7 +915,6 @@ static int __init omap3_pm_init(void)
 	per_clkdm = clkdm_lookup("per_clkdm");
 	core_clkdm = clkdm_lookup("core_clkdm");
 
-	omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 63f10669571a..f2ea1bd1c691 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -74,46 +74,6 @@
  * API functions
  */
 
-/*
- * The "get_*restore_pointer" functions are used to provide a
- * physical restore address where the ROM code jumps while waking
- * up from MPU OFF/OSWR state.
- * The restore pointer is stored into the scratchpad.
- */
-
-	.text
-/* Function call to get the restore pointer for resume from OFF */
-ENTRY(get_restore_pointer)
-	stmfd	sp!, {lr}	@ save registers on stack
-	adr	r0, restore
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(get_restore_pointer)
-	.align
-ENTRY(get_restore_pointer_sz)
-	.word	. - get_restore_pointer
-
-	.text
-/* Function call to get the restore pointer for 3630 resume from OFF */
-ENTRY(get_omap3630_restore_pointer)
-	stmfd	sp!, {lr}	@ save registers on stack
-	adr	r0, restore_3630
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(get_omap3630_restore_pointer)
-	.align
-ENTRY(get_omap3630_restore_pointer_sz)
-	.word	. - get_omap3630_restore_pointer
-
-	.text
-/* Function call to get the restore pointer for ES3 to resume from OFF */
-ENTRY(get_es3_restore_pointer)
-	stmfd	sp!, {lr}	@ save registers on stack
-	adr	r0, restore_es3
-	ldmfd	sp!, {pc}	@ restore regs and return
-ENDPROC(get_es3_restore_pointer)
-	.align
-ENTRY(get_es3_restore_pointer_sz)
-	.word	. - get_es3_restore_pointer
-
 	.text
 /*
  * L2 cache needs to be toggled for stable OFF mode functionality on 3630.
@@ -133,7 +93,7 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore)
 /* Function to call rom code to save secure ram context */
 	.align	3
 ENTRY(save_secure_ram_context)
-	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
 	adr	r3, api_params		@ r3 points to parameters
 	str	r0, [r3,#0x4]		@ r0 has sdram address
 	ldr	r12, high_mask
@@ -152,7 +112,7 @@ ENTRY(save_secure_ram_context)
 	nop
 	nop
 	nop
-	ldmfd	sp!, {r1-r12, pc}
+	ldmfd	sp!, {r4 - r11, pc}
 	.align
 sram_phy_addr_mask:
 	.word	SRAM_BASE_P
@@ -179,69 +139,38 @@ ENTRY(save_secure_ram_context_sz)
  *
  *
  * Notes:
- * - this code gets copied to internal SRAM at boot and after wake-up
- *   from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - only the minimum set of functions gets copied to internal SRAM at boot
+ *   and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
+ *   pointers in SDRAM or SRAM are called depending on the desired low power
+ *   target state.
  * - when the OMAP wakes up it continues at different execution points
  *   depending on the low power mode (non-OFF vs OFF modes),
  *   cf. 'Resume path for xxx mode' comments.
  */
 	.align	3
 ENTRY(omap34xx_cpu_suspend)
-	stmfd	sp!, {r0-r12, lr}	@ save registers on stack
+	stmfd	sp!, {r4 - r11, lr}	@ save registers on stack
 
 	/*
-	 * r0 contains CPU context save/restore pointer in sdram
-	 * r1 contains information about saving context:
+	 * r0 contains information about saving context:
 	 *   0 - No context lost
 	 *   1 - Only L1 and logic lost
 	 *   2 - Only L2 lost (Even L1 is retained we clean it along with L2)
 	 *   3 - Both L1 and L2 lost and logic lost
 	 */
 
-	/* Directly jump to WFI is the context save is not required */
-	cmp	r1, #0x0
-	beq	omap3_do_wfi
+	/*
+	 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
+	 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
+	 */
+	ldr	r4, omap3_do_wfi_sram_addr
+	ldr	r5, [r4]
+	cmp	r0, #0x0		@ If no context save required,
+	bxeq	r5			@  jump to the WFI code in SRAM
+
 
 	/* Otherwise fall through to the save context code */
 save_context_wfi:
-	mov	r8, r0			@ Store SDRAM address in r8
-	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
-	mov	r4, #0x1		@ Number of parameters for restore call
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-	mrc	p15, 1, r5, c9, c0, 2	@ Read L2 AUX ctrl register
-	stmia	r8!, {r4-r5}		@ Push parameters for restore call
-
-        /* Check what that target sleep state is from r1 */
-	cmp	r1, #0x2		@ Only L2 lost, no need to save context
-	beq	clean_caches
-
-l1_logic_lost:
-	mov	r4, sp			@ Store sp
-	mrs	r5, spsr		@ Store spsr
-	mov	r6, lr			@ Store lr
-	stmia	r8!, {r4-r6}
-
-	mrc	p15, 0, r4, c1, c0, 2	@ Coprocessor access control register
-	mrc	p15, 0, r5, c2, c0, 0	@ TTBR0
-	mrc	p15, 0, r6, c2, c0, 1	@ TTBR1
-	mrc	p15, 0, r7, c2, c0, 2	@ TTBCR
-	stmia	r8!, {r4-r7}
-
-	mrc	p15, 0, r4, c3, c0, 0	@ Domain access Control Register
-	mrc	p15, 0, r5, c10, c2, 0	@ PRRR
-	mrc	p15, 0, r6, c10, c2, 1	@ NMRR
-	stmia	r8!,{r4-r6}
-
-	mrc	p15, 0, r4, c13, c0, 1	@ Context ID
-	mrc	p15, 0, r5, c13, c0, 2	@ User r/w thread and process ID
-	mrc	p15, 0, r6, c12, c0, 0	@ Secure or NS vector base address
-	mrs	r7, cpsr		@ Store current cpsr
-	stmia	r8!, {r4-r7}
-
-	mrc	p15, 0, r4, c1, c0, 0	@ save control register
-	stmia	r8!, {r4}
-
-clean_caches:
 	/*
 	 * jump out to kernel flush routine
 	 *  - reuse that code is better
@@ -284,7 +213,32 @@ clean_caches:
  THUMB(	nop		)
 	.arm
 
-omap3_do_wfi:
+	b	omap3_do_wfi
+
+/*
+ * Local variables
+ */
+omap3_do_wfi_sram_addr:
+	.word omap3_do_wfi_sram
+kernel_flush:
+	.word v7_flush_dcache_all
+
+/* ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
+
+/*
+ * Do WFI instruction
+ * Includes the resume path for non-OFF modes
+ *
+ * This code gets copied to internal SRAM and is accessible
+ * from both SDRAM and SRAM:
+ * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
+ * - executed from SDRAM for OFF mode (omap3_do_wfi).
+ */
+	.align	3
+ENTRY(omap3_do_wfi)
 	ldr	r4, sdrc_power		@ read the SDRC_POWER register
 	ldr	r5, [r4]		@ read the contents of SDRC_POWER
 	orr	r5, r5, #0x40		@ enable self refresh on idle req
@@ -316,8 +270,86 @@ omap3_do_wfi:
 	nop
 	nop
 	nop
-	bl wait_sdrc_ok
 
+/*
+ * This function implements the erratum ID i581 WA:
+ *  SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from DDR.
+ */
+
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+	ldr	r4, cm_idlest_ckgen
+wait_dpll3_lock:
+	ldr	r5, [r4]
+	tst	r5, #1
+	beq	wait_dpll3_lock
+
+	ldr	r4, cm_idlest1_core
+wait_sdrc_ready:
+	ldr	r5, [r4]
+	tst	r5, #0x2
+	bne	wait_sdrc_ready
+	/* allow DLL powerdown upon hw idle req */
+	ldr	r4, sdrc_power
+	ldr	r5, [r4]
+	bic	r5, r5, #0x40
+	str	r5, [r4]
+
+/*
+ * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
+ * base instead.
+ * Be careful not to clobber r7 when maintaing this code.
+ */
+
+is_dll_in_lock_mode:
+	/* Is dll in lock mode? */
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	tst	r5, #0x4
+	bne	exit_nonoff_modes	@ Return if locked
+	/* wait till dll locks */
+	adr	r7, kick_counter
+wait_dll_lock_timed:
+	ldr	r4, wait_dll_lock_counter
+	add	r4, r4, #1
+	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
+	ldr	r4, sdrc_dlla_status
+	/* Wait 20uS for lock */
+	mov	r6, #8
+wait_dll_lock:
+	subs	r6, r6, #0x1
+	beq	kick_dll
+	ldr	r5, [r4]
+	and	r5, r5, #0x4
+	cmp	r5, #0x4
+	bne	wait_dll_lock
+	b	exit_nonoff_modes	@ Return when locked
+
+	/* disable/reenable DLL if not locked */
+kick_dll:
+	ldr	r4, sdrc_dlla_ctrl
+	ldr	r5, [r4]
+	mov	r6, r5
+	bic	r6, #(1<<3)		@ disable dll
+	str	r6, [r4]
+	dsb
+	orr	r6, r6, #(1<<3)		@ enable dll
+	str	r6, [r4]
+	dsb
+	ldr	r4, kick_counter
+	add	r4, r4, #1
+	str	r4, [r7]		@ kick_counter
+	b	wait_dll_lock_timed
+
+exit_nonoff_modes:
+	/* Re-enable C-bit if needed */
 	mrc	p15, 0, r0, c1, c0, 0
 	tst	r0, #(1 << 2)		@ Check C bit enabled?
 	orreq	r0, r0, #(1 << 2)	@ Enable the C bit if cleared
@@ -329,7 +361,32 @@ omap3_do_wfi:
  * == Exit point from non-OFF modes ==
  * ===================================
  */
-	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+
+/*
+ * Local variables
+ */
+sdrc_power:
+	.word	SDRC_POWER_V
+cm_idlest1_core:
+	.word	CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+	.word	CM_IDLEST_CKGEN_V
+sdrc_dlla_status:
+	.word	SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+	.word	SDRC_DLLA_CTRL_V
+	/*
+	 * When exporting to userspace while the counters are in SRAM,
+	 * these 2 words need to be at the end to facilitate retrival!
+	 */
+kick_counter:
+	.word	0
+wait_dll_lock_counter:
+	.word	0
+
+ENTRY(omap3_do_wfi_sz)
+	.word	. - omap3_do_wfi
 
 
 /*
@@ -346,13 +403,17 @@ omap3_do_wfi:
  *  restore_es3: applies to 34xx >= ES3.0
  *  restore_3630: applies to 36xx
  *  restore: common code for 3xxx
+ *
+ * Note: when back from CORE and MPU OFF mode we are running
+ *  from SDRAM, without MMU, without the caches and prediction.
+ *  Also the SRAM content has been cleared.
  */
-restore_es3:
+ENTRY(omap3_restore_es3)
 	ldr	r5, pm_prepwstst_core_p
 	ldr	r4, [r5]
 	and	r4, r4, #0x3
 	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
-	bne	restore
+	bne	omap3_restore	@ Fall through to OMAP3 common code
 	adr	r0, es3_sdrc_fix
 	ldr	r1, sram_base
 	ldr	r2, es3_sdrc_fix_sz
@@ -364,35 +425,32 @@ copy_to_sram:
 	bne	copy_to_sram
 	ldr	r1, sram_base
 	blx	r1
-	b	restore
+	b	omap3_restore	@ Fall through to OMAP3 common code
+ENDPROC(omap3_restore_es3)
 
-restore_3630:
+ENTRY(omap3_restore_3630)
 	ldr	r1, pm_prepwstst_core_p
 	ldr	r2, [r1]
 	and	r2, r2, #0x3
 	cmp	r2, #0x0	@ Check if previous power state of CORE is OFF
-	bne	restore
+	bne	omap3_restore	@ Fall through to OMAP3 common code
 	/* Disable RTA before giving control */
 	ldr	r1, control_mem_rta
 	mov	r2, #OMAP36XX_RTA_DISABLE
 	str	r2, [r1]
+ENDPROC(omap3_restore_3630)
 
 	/* Fall through to common code for the remaining logic */
 
-restore:
+ENTRY(omap3_restore)
 	/*
-	 * Check what was the reason for mpu reset and store the reason in r9:
-	 *  0 - No context lost
-	 *  1 - Only L1 and logic lost
-	 *  2 - Only L2 lost - In this case, we wont be here
-	 *  3 - Both L1 and L2 lost
+	 * Read the pwstctrl register to check the reason for mpu reset.
+	 * This tells us what was lost.
 	 */
 	ldr	r1, pm_pwstctrl_mpu
 	ldr	r2, [r1]
 	and	r2, r2, #0x3
 	cmp	r2, #0x0	@ Check if target power state was OFF or RET
-	moveq	r9, #0x3	@ MPU OFF => L1 and L2 lost
-	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
 
 	ldr	r0, l2dis_3630
@@ -471,115 +529,39 @@ logic_l1_restore:
 	orr	r1, r1, #2		@ re-enable L2 cache
 	mcr	p15, 0, r1, c1, c0, 1
 skipl2reen:
-	mov	r1, #0
-	/*
-	 * Invalidate all instruction caches to PoU
-	 * and flush branch target cache
-	 */
-	mcr	p15, 0, r1, c7, c5, 0
 
-	ldr	r4, scratchpad_base
-	ldr	r3, [r4,#0xBC]
-	adds	r3, r3, #16
-
-	ldmia	r3!, {r4-r6}
-	mov	sp, r4			@ Restore sp
-	msr	spsr_cxsf, r5		@ Restore spsr
-	mov	lr, r6			@ Restore lr
-
-	ldmia	r3!, {r4-r7}
-	mcr	p15, 0, r4, c1, c0, 2	@ Coprocessor access Control Register
-	mcr	p15, 0, r5, c2, c0, 0	@ TTBR0
-	mcr	p15, 0, r6, c2, c0, 1	@ TTBR1
-	mcr	p15, 0, r7, c2, c0, 2	@ TTBCR
-
-	ldmia	r3!,{r4-r6}
-	mcr	p15, 0, r4, c3, c0, 0	@ Domain access Control Register
-	mcr	p15, 0, r5, c10, c2, 0	@ PRRR
-	mcr	p15, 0, r6, c10, c2, 1	@ NMRR
-
-
-	ldmia	r3!,{r4-r7}
-	mcr	p15, 0, r4, c13, c0, 1	@ Context ID
-	mcr	p15, 0, r5, c13, c0, 2	@ User r/w thread and process ID
-	mrc	p15, 0, r6, c12, c0, 0	@ Secure or NS vector base address
-	msr	cpsr, r7		@ store cpsr
-
-	/* Enabling MMU here */
-	mrc	p15, 0, r7, c2, c0, 2 	@ Read TTBRControl
-	/* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
-	and	r7, #0x7
-	cmp	r7, #0x0
-	beq	usettbr0
-ttbr_error:
-	/*
-	 * More work needs to be done to support N[0:2] value other than 0
-	 * So looping here so that the error can be detected
-	 */
-	b	ttbr_error
-usettbr0:
-	mrc	p15, 0, r2, c2, c0, 0
-	ldr	r5, ttbrbit_mask
-	and	r2, r5
-	mov	r4, pc
-	ldr	r5, table_index_mask
-	and	r4, r5			@ r4 = 31 to 20 bits of pc
-	/* Extract the value to be written to table entry */
-	ldr	r1, table_entry
-	/* r1 has the value to be written to table entry*/
-	add	r1, r1, r4
-	/* Getting the address of table entry to modify */
-	lsr	r4, #18
-	/* r2 has the location which needs to be modified */
-	add	r2, r4
-	/* Storing previous entry of location being modified */
-	ldr	r5, scratchpad_base
-	ldr	r4, [r2]
-	str	r4, [r5, #0xC0]
-	/* Modify the table entry */
-	str	r1, [r2]
-	/*
-	 * Storing address of entry being modified
-	 * - will be restored after enabling MMU
-	 */
-	ldr	r5, scratchpad_base
-	str	r2, [r5, #0xC4]
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c5, 4	@ Flush prefetch buffer
-	mcr	p15, 0, r0, c7, c5, 6	@ Invalidate branch predictor array
-	mcr	p15, 0, r0, c8, c5, 0	@ Invalidate instruction TLB
-	mcr	p15, 0, r0, c8, c6, 0	@ Invalidate data TLB
-	/*
-	 * Restore control register. This enables the MMU.
-	 * The caches and prediction are not enabled here, they
-	 * will be enabled after restoring the MMU table entry.
-	 */
-	ldmia	r3!, {r4}
-	/* Store previous value of control register in scratchpad */
-	str	r4, [r5, #0xC8]
-	ldr	r2, cache_pred_disable_mask
-	and	r4, r2
-	mcr	p15, 0, r4, c1, c0, 0
-	dsb
-	isb
-	ldr     r0, =restoremmu_on
-	bx      r0
+	/* Now branch to the common CPU resume function */
+	b	cpu_resume
+ENDPROC(omap3_restore)
+
+	.ltorg
 
 /*
- * ==============================
- * == Exit point from OFF mode ==
- * ==============================
+ * Local variables
  */
-restoremmu_on:
-	ldmfd	sp!, {r0-r12, pc}	@ restore regs and return
-
+pm_prepwstst_core_p:
+	.word	PM_PREPWSTST_CORE_P
+pm_pwstctrl_mpu:
+	.word	PM_PWSTCTRL_MPU_P
+scratchpad_base:
+	.word	SCRATCHPAD_BASE_P
+sram_base:
+	.word	SRAM_BASE_P + 0x8000
+control_stat:
+	.word	CONTROL_STAT
+control_mem_rta:
+	.word	CONTROL_MEM_RTA_CTRL
+l2dis_3630:
+	.word	0
 
 /*
  * Internal functions
  */
 
-/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+/*
+ * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
+ * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
+ */
 	.text
 	.align	3
 ENTRY(es3_sdrc_fix)
@@ -609,6 +591,9 @@ ENTRY(es3_sdrc_fix)
 	str	r5, [r4]		@ kick off refreshes
 	bx	lr
 
+/*
+ * Local variables
+ */
 	.align
 sdrc_syscfg:
 	.word	SDRC_SYSCONFIG_P
@@ -627,128 +612,3 @@ sdrc_manual_1:
 ENDPROC(es3_sdrc_fix)
 ENTRY(es3_sdrc_fix_sz)
 	.word	. - es3_sdrc_fix
-
-/*
- * This function implements the erratum ID i581 WA:
- *  SDRC state restore before accessing the SDRAM
- *
- * Only used at return from non-OFF mode. For OFF
- * mode the ROM code configures the SDRC and
- * the DPLL before calling the restore code directly
- * from DDR.
- */
-
-/* Make sure SDRC accesses are ok */
-wait_sdrc_ok:
-
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
-	ldr	r4, cm_idlest_ckgen
-wait_dpll3_lock:
-	ldr	r5, [r4]
-	tst	r5, #1
-	beq	wait_dpll3_lock
-
-	ldr	r4, cm_idlest1_core
-wait_sdrc_ready:
-	ldr	r5, [r4]
-	tst	r5, #0x2
-	bne	wait_sdrc_ready
-	/* allow DLL powerdown upon hw idle req */
-	ldr	r4, sdrc_power
-	ldr	r5, [r4]
-	bic	r5, r5, #0x40
-	str	r5, [r4]
-
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
-is_dll_in_lock_mode:
-	/* Is dll in lock mode? */
-	ldr	r4, sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	tst	r5, #0x4
-	bxne	lr			@ Return if locked
-	/* wait till dll locks */
-	adr	r7, kick_counter
-wait_dll_lock_timed:
-	ldr	r4, wait_dll_lock_counter
-	add	r4, r4, #1
-	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
-	ldr	r4, sdrc_dlla_status
-	/* Wait 20uS for lock */
-	mov	r6, #8
-wait_dll_lock:
-	subs	r6, r6, #0x1
-	beq	kick_dll
-	ldr	r5, [r4]
-	and	r5, r5, #0x4
-	cmp	r5, #0x4
-	bne	wait_dll_lock
-	bx	lr			@ Return when locked
-
-	/* disable/reenable DLL if not locked */
-kick_dll:
-	ldr	r4, sdrc_dlla_ctrl
-	ldr	r5, [r4]
-	mov	r6, r5
-	bic	r6, #(1<<3)		@ disable dll
-	str	r6, [r4]
-	dsb
-	orr	r6, r6, #(1<<3)		@ enable dll
-	str	r6, [r4]
-	dsb
-	ldr	r4, kick_counter
-	add	r4, r4, #1
-	str	r4, [r7]		@ kick_counter
-	b	wait_dll_lock_timed
-
-	.align
-cm_idlest1_core:
-	.word	CM_IDLEST1_CORE_V
-cm_idlest_ckgen:
-	.word	CM_IDLEST_CKGEN_V
-sdrc_dlla_status:
-	.word	SDRC_DLLA_STATUS_V
-sdrc_dlla_ctrl:
-	.word	SDRC_DLLA_CTRL_V
-pm_prepwstst_core_p:
-	.word	PM_PREPWSTST_CORE_P
-pm_pwstctrl_mpu:
-	.word	PM_PWSTCTRL_MPU_P
-scratchpad_base:
-	.word	SCRATCHPAD_BASE_P
-sram_base:
-	.word	SRAM_BASE_P + 0x8000
-sdrc_power:
-	.word	SDRC_POWER_V
-ttbrbit_mask:
-	.word	0xFFFFC000
-table_index_mask:
-	.word	0xFFF00000
-table_entry:
-	.word	0x00000C02
-cache_pred_disable_mask:
-	.word	0xFFFFE7FB
-control_stat:
-	.word	CONTROL_STAT
-control_mem_rta:
-	.word	CONTROL_MEM_RTA_CTRL
-kernel_flush:
-	.word	v7_flush_dcache_all
-l2dis_3630:
-	.word	0
-	/*
-	 * When exporting to userspace while the counters are in SRAM,
-	 * these 2 words need to be at the end to facilitate retrival!
-	 */
-kick_counter:
-	.word	0
-wait_dll_lock_counter:
-	.word	0
-ENDPROC(omap34xx_cpu_suspend)
-
-ENTRY(omap34xx_cpu_suspend_sz)
-	.word	. - omap34xx_cpu_suspend